ASoC: stm32: spdifrx: fix regmap status check

Release resources when exiting on error.

Fixes: 1a5c0b28fc56 ("ASoC: stm32: spdifrx: manage identification registers")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5682: fix the random recording noise of headset

The cycle time of FIFO clock should increase 2 times to avoid
the random recording noise issue.
This setting could apply to all known situations in i2s mode.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200317073308.11572-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wsa881x: request gpio direction before setting

Make sure that power down gpio direction is set to ouput
before even setting it.

Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200316120303.3780-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98357a: Add ACPI HID MAX98360A

Maxim MAX98360A audio amplifier is functionally identical to MAX98357A,
add ACPI ID "MAX98360A" for driver reuse.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1584114926-29287-1-git-send-email-yong.zhi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5682: Revise the DAC1 volume setting

The max volume of the DAC1 Playback Volume is 0dB.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200313023850.28875-2-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm_adsp: Use scnprintf() for the limited buffer output

snprintf() is a hard-to-use function, it's especially difficult to use
it for concatenating substrings in a buffer with a limited size.
Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position.

Use scnprintf() instead for fixing such potential errors.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200313130334.9028-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: topology: Perform component check upfront

Function soc_tplg_dbytes_create(), calls soc_tplg_init_kcontrol() to
perform additional driver specific initialization. While
soc_tplg_init_kcontrol() ensures that component is valid before invoking
ops->control_load, there is no such check at the end of
soc_tplg_dbytes_create() where list_add() is used.

Also in quite a few places, there is reference of tplg->comp->dapm or
tplg->comp->card, without any checks for tplg->comp.

In consequence of the above this may lead to referencing NULL pointer.

This allows for removal of now unnecessary checks.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200312122239.14489-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: qdsp6: fix default FE dais and routings." from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

QDSP6 Frontend dais can be configured to work in rx or tx or both rx/tx mode,
however the default routing do not honour this DT configuration making sound
card fail to probe. FE dais are also not fully honouring device tree configuration.
Fix both of them.

Originally  issue was reported by Vinod Koul

Srinivas Kandagatla (2):
  ASoC: qdsp6: q6asm-dai: only enable dais from device tree
  ASoC: qdsp6: q6routing: remove default routing

 sound/soc/qcom/qdsp6/q6asm-dai.c | 30 +++++++++++++++++++++++-------
 sound/soc/qcom/qdsp6/q6routing.c | 19 -------------------
 2 files changed, 23 insertions(+), 26 deletions(-)

--
2.21.0

ASoC: SOF: Intel: Fix stream cleanup on hw free

Field "substream" gets assigned during stream setup in
hda_dsp_pcm_hw_params() but it is never cleared afterwards during
cleanup procedure. Now, any non-pcm operation e.g.: compress can
mistakenly make use of that pointer as it's bypassing all
"if (s->substream)" checks.

Nulling the pointer during hw_free operation ensures no wild pointers
are left behind.

Fixes: cdae3b9a47aa ("ASoC: SOF: Intel: Add Intel specific HDA PCM operations")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312120058.15057-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS: Update Cirrus Logic codec driver maintainers

Brian & Paul are no longer active audio codec driver
maintainers. Update list to reflect myself and David
Rhodes as the active maintainers.

Signed-off-by: James Schulman <james.schulman@cirrus.com>
Link: https://lore.kernel.org/r/20200310192751.24487-1-james.schulman@cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS: add entry for Sound Open Firmware drivers

Sound Open Firmware (SOF) is an open source audio DSP firwmare
instrastructure and SDK. The kernel drivers for SOF are part of
the ALSA subsystem.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200311174537.24497-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6routing: remove default routing

Frontend dais can be configured to rx or tx or both, however having default
routes without considering this configuration can lead to failures during
card probe as below for compress rx only case. These routing have to come
from sound card routing table in device tree.

"routing: ASoC: Failed to add route MM_UL1 -> direct -> MultiMedia1 Capture
msm-snd-sdm845 sound: ASoC: failed to instantiate card -19
"

Reported-by: Vinod Koul <vinod.koul@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6asm-dai: only enable dais from device tree

Existing code enables all the playback and capture dais even
if there is no device tree entry. This can lead to
un-necessary dais in the system which will never be used.
So honour whats specfied in device tree.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Await purge request ack on CNL

Each purge request is sent by driver after master core is powered up and
unresetted but before it is unstalled. On unstall, ROM begins processing
the request and initializing environment for FW load. Host should await
ROM's ack before moving forward. Without doing so, ROM init poll may
start too early and false timeouts can occur.

Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Allow for ROM init retry on CNL platforms

Due to unconditional initial timeouts, firmware may fail to load during
its initialization. This issue cannot be resolved on driver side as it
is caused by external sources such as CSME but has to be accounted for
nonetheless.

Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Shield against no-NHLT configurations

Some configurations expose no NHLT table at all within their
/sys/firmware/acpi/tables. To prevent NULL-dereference errors from
occurring, adjust probe flow and append additional safety checks in
functions involved in NHLT lifecycle.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Enable codec wakeup during chip init

Follow the recommendation set by hda_intel.c and enable HDMI/DP codec
wakeup during bus initialization procedure. Disable wakeup once init
completes.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Select hda configuration permissively

With _reset_link removed from the probe sequence, codec_mask at the time
skl_find_hda_machine() is invoked will always be 0, so hda machine will
never be chosen. Rather than reorganizing boot flow, be permissive about
invalid mask. codec_mask will be set to proper value during probe_work -
before skl_codec_create() ever gets called.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Remove superfluous chip initialization

Skylake driver does the controller init operation twice:
- first during probe (only to stop it just before scheduling probe_work)
- and during said probe_work where the actual correct sequence is
executed

To properly complete boot sequence when iDisp codec is present, bus
initialization has to be called only after _i915_init() finishes.
With additional _reset_list preceding _i915_init(), iDisp codec never
gets the chance to enumerate on the link. Remove the superfluous
initialization to address the issue.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: skl_nau88l25_ssm4567: disable route checks

Deal with incomplete topologies, this patch restores sound on user
devices.

Fixes: daa480bde6b3a9 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: ojab // <ojab@ojab.ru>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200309192744.18380-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: disable route checks for legacy devices

v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes,
which results in the ASoC card probe failing.

Introduce a flag to be set in machine drivers to prevent the probe
from stopping in case of incomplete topologies or missing routes. This
flag is for backwards compatibility only and shall not be used for
newer machine drivers.

Example with an HDaudio card with a bad topology:

[ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx

[ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19

with the disable_route_checks set:

[ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx

[ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: disable_route_checks set, ignoring errors on
add_routes

Fixes: daa480bde6b3a9 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200309192744.18380-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: jz4740-i2s: Fix divider written at incorrect offset in register

The 4-bit divider value was written at offset 8, while the jz4740
programming manual locates it at offset 0.

Fixes: 26b0aad80a86 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wcd9335: fix address map representation

slimbus addresses are 16 bit wide, masking page numbers
to wcd register at offset of 12 will limit the number for pages.
So it becomes impossible to write to page 0x10 registers.
Remove masking 0x800 (slimbus address range) from register address
and making use of window parameters in regmap config should fix it
and also will represent the registers exactly inline with Datasheet.

Remove this unnessary masking and make the registers be inline
with datasheet.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200306152633.25836-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8741: Fix typo in Kconfig prompt

Fix trivial copy-n-paste mistake.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200304140241.340-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: stm32: sai: manage rebind issue

The commit e894efef9ac7 ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional. The following problems have been seen
with STM32 SAI driver.

1) DMA channel is not requested:

With the sound card rebind the simplified call sequence is:
stm32_sai_sub_probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register

The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.

Modify SAI driver, to change the call sequence as follows:
stm32_sai_sub_probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card

2) DMA channel is not released:

dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().

devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.

Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SAI driver, to have the right sequence.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Message-Id: <20200304102406.8093-1-olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Fix snd_sof_ipc_stream_posn()

We're passing "&posn" instead of "posn" so it ends up corrupting
memory instead of doing something useful.

Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200303101858.ytehbrivocyp3cnf@kili.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1015: modify pre-divider for sysclk

Modify pre-divider for system clock.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200303025913.24499-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1015: add operation callback function for rt1015_dai[]

Add operation callback function for rt1015_dai[].

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200302015424.9075-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-component: tidyup snd_soc_pcm_component_sync_stop()

commit 1e5ddb6ba73894 ("ASoC: component: Add sync_stop PCM ops")
added snd_soc_pcm_component_sync_stop(), but it is checking
ioctrl instead of sync_stop. This is bug.
This patch fixup it.

Fixes: commit 1e5ddb6ba73894 ("ASoC: component: Add sync_stop PCM ops")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/8736av7a8c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dapm: Correct DAPM handling of active widgets during shutdown

commit c2caa4da46a4 ("ASoC: Fix widget powerdown on shutdown") added a
set of the power state during snd_soc_dapm_shutdown to ensure the
widgets powered off. However, when commit 39eb5fd13dff
("ASoC: dapm: Delay w->power update until the changes are written")
added the new_power member of the widget structure, to differentiate
between the current power state and the target power state, it did not
update the shutdown to use the new_power member.

As new_power has not updated it will be left in the state set by the
last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence
for the shutdown proceeds it will turn the widgets on (despite them
already being on) rather than turning them off.

Fixes: 39eb5fd13dff ("ASoC: dapm: Delay w->power update until the changes are written")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200228153145.21013-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2562: Fix sample rate error message

Fix error message for setting the sample rate.  It says bitwidth but
should say sample rate.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200226130305.12043-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Fix available clock counter incrementation

Incrementation of avail_clk_cnt was incorrectly moved to error path. Put
it back to success path.

Fixes: 6ee927f2f01466 ('ASoC: Intel: Skylake: Fix NULL ptr dereference when unloading clk dev')
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200224125202.13784-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm/soc-compress: don't use snd_soc_dapm_stream_stop()

commit b0edff42360ab4 ("ASoC: soc-pcm/soc-compress: use
snd_soc_dapm_stream_stop() for SND_SOC_DAPM_STREAM_STOP")
uses snd_soc_dapm_stream_stop() for soc_compr_free_fe()
and dpcm_fe_dai_shutdown() because it didn't care about pmdown_time.
But, it didn't need to care.
This patch rollback to original code.
Some system will wait unneeded timed-out without this patch.
Special Thanks for reporting to Chris Gorman.
...
intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3
intel_sst_acpi 808622A8:00: fw returned err -16
sst-mfld-platform sst-mfld-platform: ASoC: PRE_PMD: pcm0_in event failed: -16
...

Fixes: commit b0edff42360ab4 ("ASoC: soc-pcm/soc-compress: use snd_soc_dapm_stream_stop() for SND_SOC_DAPM_STREAM_STOP")
Reported-by: Chris Gorman <chrisjohgorman@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfowspeb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: g12a: add tohdmitx reset

Reset the g12a hdmi codec glue on probe. This ensure a sane startup state.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200221121146.1498427-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path

When we get a clock error during probe we have to call
regulator_bulk_disable before bailing out, otherwise we trigger
a warning in regulator_put.

Fix this by using "goto err" like in the error cases above.

Fixes: 5a3af1293194d ("ASoC: pcm512x: Add PCM512x driver")
Signed-off-by: Matthias Reichl <hias@horus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200220202956.29233-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: fix for_rtd_codec_dai_rollback() macro

The use of parentheses to protect the argument is fine for (i)++ but
not for (--i).

Fixes: 83f94a2e293d61 ("ASoC: soc-core: add snd_soc_close_delayed_work()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200219222130.29933-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: topology: Fix memleak in soc_tplg_manifest_load()

In case of ABI version mismatch, _manifest needs to be freed as
it is just a copy of the original topology manifest. However, if
a driver manifest handler is defined, that would get executed and
the cleanup is never reached. Fix that by getting the return status
of manifest() instead of returning directly.

Fixes: 583958fa2e52 ("ASoC: topology: Make manifest backward compatible from ABI v4")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-3-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: topology: Fix memleak in soc_tplg_link_elems_load()

If soc_tplg_link_config() fails, _link needs to be freed in case of
topology ABI version mismatch. However the current code is returning
directly and ends up leaking memory in this case.
This patch fixes that.

Fixes: 593d9e52f9bb ("ASoC: topology: Add support to configure existing physical DAI links")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-2-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output

dpcm_show_state() invokes multiple snprintf() calls to concatenate
formatted strings on the fixed size buffer.  The usage of snprintf()
is supposed for avoiding the buffer overflow, but it doesn't work as
expected because snprintf() doesn't return the actual output size but
the size to be written.

Fix this bug by replacing all snprintf() calls with scnprintf()
calls.

Fixes: f86dcef87b77 ("ASoC: dpcm: Add debugFS support for DPCM")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: skl: Fix possible buffer overflow in debug outputs

The debugfs output of intel skl driver writes strings with multiple
snprintf() calls with the fixed size.  This was supposed to avoid the
buffer overflow but actually it still would, because snprintf()
returns the expected size to be output, not the actual output size.

Fix it by replacing snprintf() calls with scnprintf().

Fixes: d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: skl: Fix pin debug prints

skl_print_pins() loops over all given pins but it overwrites the text
at the very same position while increasing the returned length.
Fix this to show the all pin contents properly.

Fixes: d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2562: Return invalid for when bitwidth is invalid

If the bitwidth passed in to the set_bitwidth function is not supported
then return an error.

Fixes: 29b74236bd57 ("ASoC: tas2562: Introduce the TAS2562 amplifier")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200218185252.26290-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sun8i-codec: Fix setting DAI data format

Use the correct mask for this two-bit field. This fixes setting the DAI
data format to RIGHT_J or DSP_A.

Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: ACP needs to be powered off in BIOS.

Removed this logic because It is BIOS which needs to
power off the ACP power domian through ACP_PGFSM_CTRL
register when you De-initialize ACP Engine.

Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1581935964-15059-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: hdmi-codec: set plugged_cb to NULL when component removing

Sets plugged_cb to NULL when component removing to notify its consumers
: no further plugged status report is required.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200217105513.1.Icc323daaf71ad02f191fd8d91136b01b61eca5e3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dapm: remove snd_soc_dapm_put_enum_double_locked

Reverts commit 839284e79482 ("ASoC: dapm: add
snd_soc_dapm_put_enum_double_locked").

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200214105744.82258-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98090: revert invalid fix for handling SHDN

Reverts commit 62d5ae4cafb7 ("ASoC: max98090: save and restore
SHDN when changing sensitive registers").

A critical side-effect was observed: when keep playing something,
the recorded sound has chance to break (clipping).

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200214105744.82258-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec2codec: avoid invalid/double-free of pcm runtime

The PCM runtime was freed during PMU in the case that the event hook
encountered an error. However, it is also unconditionally freed during
PMD. Avoid a double-free by dropping the call to kfree in the PMU hook.

Fixes: a72706ed8208 ("ASoC: codec2codec: remove ephemeral variables")
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200213061147.29386-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: Buffer Size instead of MAX Buffer

Because of MAX BUFFER size in register,when user/app give small
buffer size produces noise of old data in buffer.
This patch rectifies this noise when using different
buffer sizes less than MAX BUFFER.

Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1581426768-8937-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: move i915 init earlier

To be compliant with i915 display driver requirements, i915 power-up
must be done before any HDA communication takes place, including
parsing the bus capabilities. Otherwise the initial codec probe
may fail.

Move i915 initialization earlier in the SOF HDA sequence. This
sequence is now aligned with the snd-hda-intel driver where the
display_power() call is before snd_hdac_bus_parse_capabilities()
and rest of the capability parsing.

Also remove unnecessary ifdef around hda_codec_i915_init(). There's
a dummy implementation provided if CONFIG_SND_SOC_SOF_HDA is not
enabled.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: fix ordering bug in resume flow

When HDA controller is resumed from suspend, i915 HDMI/DP
codec requires that following order of actions is kept:

 - i915 display power up and configuration of link params
 - hda link reset and setup

Current SOF HDA code delegates display codec power control
to the codec driver. This works most of the time, but in
runtime PM sequences, the above constraint may be violated.
On platforms where BIOS values for HDA link parameters do
not match hardware reset defaults, this may lead to errors
in HDA verb transactions after resume.

Fix the issue by explicitly powering the display codec
in the HDA controller resume/suspend calls, thus ensuring
correct ordering. Special handling is needed for the D0i3
flow, where display power must be turned off even though
DSP is left powered.

Now that we have more invocations of the display power helper
functions, the conditional checks surrounding each call have
been moved inside hda_codec_i915_display_power(). The two
special cases of display powering at initial probe are handled
separately. The intent is to avoid powering the display whenever
no display codecs are used.

Note that early powering of display was removed in
commit 687ae9e287b3 ("ASoC: intel: skl: Fix display power regression").
This change was also copied to the SOF driver. No failures
have resulted as hardware default values for link parameters
have worked out of the box. However with recent i915 driver
changes like done in commit 87c1694533c9 ("drm/i915: save
AUD_FREQ_CNTRL state at audio domain suspend"), this does not
hold anymore and errors are hit.

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda: do not override bus codec_mask in link_get()

snd_hdac_ext_bus_link_get() does not work correctly in case
there are multiple codecs on the bus. It unconditionally
resets the bus->codec_mask value. As per documentation in
hdaudio.h and existing use in client code, this field should
be used to store bit flag of detected codecs on the bus.

By overwriting value of the codec_mask, information on all
detected codecs is lost. No current user of hdac is impacted,
but use of bus->codec_mask is planned in future patches
for SOF.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: atmel: fix atmel_ssc_set_audio link failure

The ssc audio driver can call into both pdc and dma backends.  With the
latest rework, the logic to do this in a safe way avoiding link errors
was removed, bringing back link errors that were fixed long ago in commit
061981ff8cc8 ("ASoC: atmel: properly select dma driver state") such as

sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
atmel_ssc_dai.c:(.text+0xac): undefined reference to `atmel_pcm_pdc_platform_register'

Fix it this time using Makefile hacks and a comment to prevent this
from accidentally getting removed again rather than Kconfig hacks.

Fixes: 18291410557f ("ASoC: atmel: enable SOC_SSC_PDC and SOC_SSC_DMA in Kconfig")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200130130545.31148-1-codrin.ciubotariu@microchip.com
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Fix exiting path on probing failure

If the imx-sdma driver is built as a module, the fsl-sai device doesn't
disable on probing failure, which causes the warning in the next probing:

==================================================================
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
==================================================================

Disabling the device properly fixes the issue.

Fixes: 812ad463e089 ("ASoC: fsl_sai: Add support for runtime pm")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20200205160436.3813642-1-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS

Just adding a dependency on COMMON_CLK to SND_SOC_WCD934X is not
sufficient, as enabling SND_SOC_ALL_CODECS will still select it,
breaking the build later:

    WARNING: unmet direct dependencies detected for SND_SOC_WCD934X
      Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] && MFD_WCD934X [=m]
      Selected by [m]:
      - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] && MFD_WCD934X [=m]
    ...
    ERROR: "of_clk_add_provider" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
    ERROR: "of_clk_src_simple_get" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
    ERROR: "clk_hw_register" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
    ERROR: "__clk_get_name" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!

Fix this by adding the missing dependency to SND_SOC_ALL_CODECS

Fixes: 42b716359beca106 ("ASoC: wcd934x: Add missing COMMON_CLK dependency")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200204131857.7634-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wcd934x: Add missing COMMON_CLK dependency

Looks like some platforms are not yet using COMMON CLK.

PowerPC allyesconfig failed with below error in next

ld: sound/soc/codecs/wcd934x.o:(.toc+0x0):
 undefined reference to `of_clk_src_simple_get'
ld: sound/soc/codecs/wcd934x.o: in function `.wcd934x_codec_probe':
wcd934x.c:(.text.wcd934x_codec_probe+0x3d4):
 undefined reference to `.__clk_get_name'
ld: wcd934x.c:(.text.wcd934x_codec_probe+0x438):
 undefined reference to `.clk_hw_register'
ld: wcd934x.c:(.text.wcd934x_codec_probe+0x474):
 undefined reference to `.of_clk_add_provider'

Add the missing COMMON_CLK dependency to fix this errors.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200204111241.6927-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs

Remove the maintainer "Bard Liao" since he had quitted from Realtek.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/3ae27357f98a406a958304386a1457bc@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: Revert 24 and 32 bit support

Commit f3ee99087c8ca0ecfdd549ef5a94f557c42d5428 ("ASoC: tegra: Allow
24bit and 32bit samples") added 24-bit and 32-bit support for to the
Tegra30 I2S driver. However, there are two additional commits that are
also needed to get 24-bit and 32-bit support to work correctly. These
commits are not yet applied because there are still some review comments
that need to be addressed. With only this change applied, 24-bit and
32-bit support is advertised by the I2S driver, but it does not work and
the audio is distorted. Therefore, revert this patch for now until the
other changes are also ready.

Furthermore, a clock issue with 24-bit support has been identified with
this change and so if we revert this now, we can also fix that in the
updated version.

Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200131091901.13014-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

ASoC: SOF: Intel: add PCI ID for JasperLake

Mirror ID added for legacy HDaudio.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200131204032.10213-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt715: Add __maybe_unused to PM callbacks

Fix the compile warnings by adding __maybe_unused to PM callbacks:
  sound/soc/codecs/rt715-sdw.c:566:12: warning: ‘rt715_dev_resume’ defined but not used [-Wunused-function]
  sound/soc/codecs/rt715-sdw.c:552:12: warning: ‘rt715_dev_suspend’ defined but not used [-Wunused-function]

Fixes: d1ede0641b05 ("ASoC: rt715: add RT715 codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt711: Add __maybe_unused to PM callbacks

Fix the compile warnings by adding __maybe_unused to PM callbacks:
  sound/soc/codecs/rt711-sdw.c:504:12: warning: ‘rt711_dev_resume’ defined but not used [-Wunused-function]
  sound/soc/codecs/rt711-sdw.c:490:12: warning: ‘rt711_dev_suspend’ defined but not used [-Wunused-function]

Fixes: 320b8b0d13b8 ("ASoC: rt711: add rt711 codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt700: Add __maybe_unused to PM callbacks

Fix the compile warnings by adding __maybe_unused to PM callbacks:
  sound/soc/codecs/rt700-sdw.c:503:12: warning: ‘rt700_dev_resume’ defined but not used [-Wunused-function]
  sound/soc/codecs/rt700-sdw.c:489:12: warning: ‘rt700_dev_suspend’ defined but not used [-Wunused-function]

Fixes: 7d2a5f9ae41e ("ASoC: rt700: add rt700 codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1308-sdw: Add __maybe_unused to PM callbacks

Fix the compile warnings by adding __maybe_unused to PM callbacks:
  sound/soc/codecs/rt1308-sdw.c:690:12: warning: ‘rt1308_dev_resume’ defined but not used [-Wunused-function]
  sound/soc/codecs/rt1308-sdw.c:676:12: warning: ‘rt1308_dev_suspend’ defined but not used [-Wunused-function]

Fixes: a87a6653a28c ("ASoC: rt1308-sdw: add rt1308 SdW amplifier driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: Fix simultaneous playback and capture

Stopping of one stream is killing the other stream when they
are running simultaneously. This is because, IER register is
cleared which disables I2S and overrides any other block enables.

Clearing IER register only when all streams on a channel are disabled,
fixes the issue.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200128103029.128841-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: consistent HDMI codec probing code

Multiple Intel ASoC machine drivers repeat the same pattern in their
.late_probe() methods: they first check whether the common HDMI codec
driver is used, if not, they proceed by linking the legacy HDMI
driver to each HDMI port. While doing that they use some
inconsistent code:

1. after the loop they check, whether the list contained at least one
   element and if not, they return an error. However, the earlier
   code to use the common HDMI driver uses the first element of the
   same list without checking. To fix this we move the check to the
   top of the function.

2. some of those .late_probe() implementations execute code, only
   needed for the common HDMI driver, before checking, whether the
   driver is used. Move the code to after the check.

3. Some of those functions also perform a redundant initialisation of
   the "err" variable.

This patch fixes those issues.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: soc-acpi-intel-icl-match: fix rt715 ADR

Fix the part id of rt715 (typo with zero in the wrong place)

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pci: add missing default_fw_name of JasperLake

jsl_desc missed default_fw_name, this will fail the probe in
nocodec or generice HDA mode due the firmware path is intel/sof/(null)

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: trace: fix unconditional free in trace release

Check if DMA pages were successfully allocated in initialization
before calling free. For many types of memory (like sgbufs)
the extra free is harmless, but not all backends track allocation
state, so add an explicit check.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: core: release resources on errors in probe_continue

The initial intent of releasing resources in the .remove does not work
well with HDaudio codecs. If the probe_continue() fails in a work
queue, e.g. due to missing firmware or authentication issues, we don't
release any resources, and as a result the kernel oopses during
suspend operations.

The suggested fix is to release all resources during errors in
probe_continue(), and use fw_state to track resource allocation
state, so that .remove does not attempt to release the same
hardware resources twice. PM operations are also modified so that
no action is done if DSP resources have been freed due to
an error at probe.

Reported-by: Takashi Iwai <tiwai@suse.de>
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Bugzilla:  http://bugzilla.suse.com/show_bug.cgi?id=1161246
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200124213625.30186-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

ASoC: SOF: core: free trace on errors

free_trace() is not called on probe errors, fix

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

ASoC: SOF: fix an Oops, caused by invalid topology

It is possible to create invalid topology that will cause a kernel
Oops when trying to allocate buffers for a NULL substream.
Specifically such an Oops was caused by a topology, where a DAI on a
capture pipeline was referencing the PCM ID from a playback pipeline.
Fix the Oops by explicitly checking for NULL.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: Fix for Subsequent Playback issue.

If we play audio back to back, which kills one playback
and immediately start another, we can hear clicks.
This patch fixes the issue.

Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1580124397-19842-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: do not disable i915 power during probe

Change HDA probe behaviour slightly so that i915 power is not
turned off if i915 audio codecs are found in the initial probe done
by SOF Intel driver, and power is kept on until HDA codec driver
probe runs.

This will reduce number of mode sets on platforms with low
minimum CDCLK (like GLK) and brings the SOF probe sequence closer
to legacy HDA driver in terms of i915 audio codec power management.

BugLink: https://github.com/thesofproject/linux/issues/1642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200120160117.29130-3-kai.vehmanen@linux.intel.com
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: refactor i915_get/put functions

The current interface to control i915 display power is misleading.
The hda_codec_i915_get() and hda_codec_i915_put() names suggest
a refcounting based interface. This is confusing as no refcounting
is done and the underlying HDAC library interface does not support
refcounts eithers.

Clarify the code by replacing the functions with a single
hda_codec_i915_display_power() that is aligned with
snd_hdac_display_power().

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200120160117.29130-2-kai.vehmanen@linux.intel.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1015: Remove unnecessary const

Clang warns:

../sound/soc/codecs/rt1015.c:392:14: warning: duplicate 'const'
declaration specifier [-Wduplicate-decl-specifier]
static const SOC_ENUM_SINGLE_DECL(rt1015_boost_mode_enum, 0, 0,
             ^
../include/sound/soc.h:355:2: note: expanded from macro
'SOC_ENUM_SINGLE_DECL'
        SOC_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xtexts)
        ^
../include/sound/soc.h:352:2: note: expanded from macro
'SOC_ENUM_DOUBLE_DECL'
        const struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
        ^
1 warning generated.

Remove the const after static to fix it.

Fixes: df31007400c3 ("ASoC: rt1015: add rt1015 amplifier driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/845
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200124155750.33753-1-natechancellor@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98090: silence lockdep warning

Commit 08df0d9a00f7 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep
warning"") provided a good rationale for removing separate lock for the
SHDN register access. However it restored the lockdep warning during the
system boot. To silence the lockdep warning, mark the mutex taken in the
max98090_shdn_save() function with the lockdep class dedicated for the
runtime DAPM operations: SND_SOC_DAPM_CLASS_RUNTIME. This finally fixes
the following lockdep warning observed on Exynos4412-based Odroid U3
board:

======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc7-next-20200123 #7329 Not tainted
------------------------------------------------------
alsactl/1105 is trying to acquire lock:
ed4f7cf4 (&card->dapm_mutex){+.+.}, at: max98090_shdn_save+0x1c/0x28

but task is already holding lock:
edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&card->controls_rwsem){++++}:
       snd_ctl_add_replace+0x3c/0x84
       dapm_create_or_share_kcontrol+0x24c/0x2e0
       snd_soc_dapm_new_widgets+0x308/0x594
       snd_soc_bind_card+0x834/0xa94
       devm_snd_soc_register_card+0x34/0x6c
       odroid_audio_probe+0x288/0x34c
       platform_drv_probe+0x6c/0xa4
       really_probe+0x200/0x48c
       driver_probe_device+0x78/0x1f8
       bus_for_each_drv+0x74/0xb8
       __device_attach+0xd4/0x16c
       bus_probe_device+0x88/0x90
       deferred_probe_work_func+0x3c/0xd0
       process_one_work+0x230/0x7bc
       worker_thread+0x44/0x524
       kthread+0x130/0x164
       ret_from_fork+0x14/0x20
       0x0

-> #0 (&card->dapm_mutex){+.+.}:
       lock_acquire+0xe8/0x270
       __mutex_lock+0x9c/0xb18
       mutex_lock_nested+0x1c/0x24
       max98090_shdn_save+0x1c/0x28
       max98090_put_enum_double+0x20/0x40
       snd_ctl_ioctl+0x190/0xbb8
       ksys_ioctl+0x484/0xb10
       ret_fast_syscall+0x0/0x28
       0xbede0564

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&card->controls_rwsem);
                               lock(&card->dapm_mutex);
                               lock(&card->controls_rwsem);
  lock(&card->dapm_mutex);

 *** DEADLOCK ***

1 lock held by alsactl/1105:
 #0: edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8

stack backtrace:
CPU: 2 PID: 1105 Comm: alsactl Not tainted 5.5.0-rc7-next-20200123 #7329
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c01126f0>] (unwind_backtrace) from [<c010e1e8>] (show_stack+0x10/0x14)
[<c010e1e8>] (show_stack) from [<c0b5234c>] (dump_stack+0xb4/0xe0)
[<c0b5234c>] (dump_stack) from [<c018a610>] (check_noncircular+0x1ec/0x208)
[<c018a610>] (check_noncircular) from [<c018ca2c>] (__lock_acquire+0x1210/0x25ec)
[<c018ca2c>] (__lock_acquire) from [<c018e728>] (lock_acquire+0xe8/0x270)
[<c018e728>] (lock_acquire) from [<c0b71928>] (__mutex_lock+0x9c/0xb18)
[<c0b71928>] (__mutex_lock) from [<c0b723c0>] (mutex_lock_nested+0x1c/0x24)
[<c0b723c0>] (mutex_lock_nested) from [<c086097c>] (max98090_shdn_save+0x1c/0x28)
[<c086097c>] (max98090_shdn_save) from [<c08613f8>] (max98090_put_enum_double+0x20/0x40)
[<c08613f8>] (max98090_put_enum_double) from [<c0833f20>] (snd_ctl_ioctl+0x190/0xbb8)
[<c0833f20>] (snd_ctl_ioctl) from [<c02cae14>] (ksys_ioctl+0x484/0xb10)
[<c02cae14>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed331fa8 to 0xed331ff0)
...

Fixes: 08df0d9a00f7 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep warning"")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200123134046.9769-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: remove null_snd_soc_ops

All rtd->dai_link callback functions are controlled by soc_rtd_xxxx(),
and checking rtd->dai_link->ops.
We don't need to have null_snd_soc_ops anymore.
This patch removes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhegl3oz.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: add soc_rtd_trigger()

Add soc_rtd_trigger() to make the code easier to read

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rrsmi9j.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: add soc_rtd_hw_free()

Add soc_rtd_hw_free() to make the code easier to read

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736c8mi9n.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: add soc_rtd_hw_params()

Add soc_rtd_hw_params() to make the code easier to read

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kwomi9r.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: add soc_rtd_prepare()

Add soc_rtd_prepare() to make the code easier to read

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zh4mi9v.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: add soc_rtd_shutdown()

Add soc_rtd_shutdown() to make the code easier to read

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e1kmi9z.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: add soc_rtd_startup()

Add soc_rtd_startup() to make the code easier to read

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878sm0mia4.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1015: add rt1015 amplifier driver

This is initial amplifier driver for rt1015.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200115112519.22050-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: madera: Correct some kernel doc

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200122104559.17043-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Add MediaTek MT6660 Speaker Amp Driver

The MT6660 is a boosted BTL class-D amplifier with V/I sensing.
A built-in DC-DC step-up converter is used to provide efficient
power for class-D amplifier with multi-level class-G operation.
The digital audio interface supports I2S, left-justified,
right-justified, TDM and DSP A/B format for audio in with a data
out used for chip information like voltage sense and current
sense, which are able to be monitored via DATAO through proper

Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
Link: https://lore.kernel.org/r/1579153597-23286-1-git-send-email-richtek.jeff.chang@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rt5645: add suppliers

The rt5645 and rt5650 have two suppliers, document them.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200114150151.8537-1-matthias.bgg@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double()

Commit 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when
changing sensitive registers SHDN bit") uses dapm_mutex to protect SHDN
bit.  However, snd_soc_dapm_put_enum_double() in
max98090_dapm_put_enum_double() acquires the dapm_mutex again which
cause a deadlock.

Use snd_soc_dapm_put_enum_double_locked() instead to fix the deadlock.

Fixes: 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when changing sensitive registers SHDN bit")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-4-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dapm: add snd_soc_dapm_put_enum_double_locked

Adds snd_soc_dapm_put_enum_double_locked() for those use cases if
dapm_mutex has already locked.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98090: revert "ASoC: max98090: fix lockdep warning"

Commit 2dc98af62c32 ("ASoC: max98090: fix lockdep warning") introduced
a helpful-less small lock: shdn_lock.  Reverts the commit.

Reasons:

1. Lockdep should not be happy by either the original or current code.
From lockdep's point of view, there is a lock inversion anyway.

Let d = dapm_mutex, c = controls_rwsem, s = shdn_lock,

From the reported calling stack: lock acquisition order of
snd_soc_register_card() is: d -> c.
> snd_ctl_add_replace+0x3c/0x84
> dapm_create_or_share_kcontrol+0x24c/0x2e0
> snd_soc_dapm_new_widgets+0x308/0x594
> snd_soc_bind_card+0x80c/0xad4
> devm_snd_soc_register_card+0x34/0x6c

If calling snd_soc_dapm_put_enum_double() in kcontrol's put (e.g.
SOC_DAPM_ENUM_EXT), lock acquisition order is: c -> d.  Note that,
snd_soc_dapm_put_enum_double() acquires d.

The possible lock inversion is always there if registering sound card
and putting mixer control happen at the same time.  In fact, it never
happens because the control device don't show up to the userspace until
the sound card build success.

Commit 2dc98af62c32 ("ASoC: max98090: fix lockdep warning") changes the
order to: c -> s -> d.  The lock inversion is still there.

2. Commit 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when
changing sensitive registers SHDN bit") designed to use dapm_mutex to
protect SHDN bit.  Use a separate lock breaks the protection.

DAPM changes SHDN bit automatically when it finds the path.  Thus, any
code wants to change the SHDN bit, need to acquire the dapm_mutex first.

> SND_SOC_DAPM_SUPPLY("SHDN", M98090_REG_DEVICE_SHUTDOWN,
>        M98090_SHDNN_SHIFT, 0, NULL, 0),

Fixes: 2dc98af62c32 ("ASoC: max98090: fix lockdep warning")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: remove bus_control

Now, snd_soc_dai_driver::bus_control is used for how to resume.
But, no driver which has bus_control has DAI driver suspend/resume
support.
This patch removes pointless bus_control from ALSA SoC.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnffx7i4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: remove DAI suspend/resume

Historically, CPU and Codec were implemented different, but now it is
merged as Component.
ALSA SoC is supporting suspend/resume at DAI and Component level.
The method is like below.

1) Suspend/Resume all CPU DAI if bus-control was 0
2) Suspend/Resume all Component
3) Suspend/Resume all CPU DAI if bus-control was 1

Historically 2) was Codec special operation.
Because CPU and Codec were merged into Component,
CPU   suspend/resume has 3 chance to suspend(= 1/2/3), but
Codec suspend/resume has 1 chance (= 2).

Here, DAI side suspend/resume is caring bus-control, but no driver
which is supporting suspend/resume is setting bus-control.
This means 3) was never used.

Here, used parameter for suspend/resume component->dev and dai->dev are
same pointer.
For that reason, we can merge DAI and Component suspend/resume.
One note is that we should use 2), because it is caring BIAS level.

This patch removes 1) and 3).

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1zvx7i8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pxa: pxa2xx-i2s: move .suspend/.resume to component

There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.

Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgkbx7ic.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pxa: pxa-ssp: move .suspend/.resume to component

There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can swtcih all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.

Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.

This patch moves DAI driver .suspend/.resume to Component driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv4rx7ij.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ux500: ux500_msp_dai: remove unused DAI .suspend/.resume

This patch removes unused DAI driver .suspend/.resume

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9p7x7io.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: samsung: i2s: move .suspend/.resume to component

There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.

Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.

This patch moves DAI driver .suspend/.resume to Component driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wo9nx7it.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dwc: dwc-i2s: move .suspend/.resume to component

There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.

Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.

This patch moves DAI driver .suspend/.resume to Component driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2u3x7iy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: uniphier: move .suspend/.resume to component

There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.

Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.

This patch moves DAI driver .suspend/.resume to Component driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhejx7j4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: omap-mcpdm: move .suspend/.resume to component

There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.

Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.

This patch moves DAI driver .suspend/.resume to Component driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/871rrvym3p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sti: sti_uniperif: move .suspend/.resume to component

There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.

Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.

This patch moves DAI driver .suspend/.resume to Component driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736cbym3x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>