Felix Fietkau [Mon, 16 Aug 2021 08:05:14 +0000 (10:05 +0200)]
mac80211: fix HT40 mode for 6G band
The channel offset used for VHT segment calculation was missing for HT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stijn Tintel [Fri, 20 Aug 2021 11:33:51 +0000 (14:33 +0300)]
uhttpd: add config option for json_script
Add a config option for json_script instead of unconditionally including
all json files in /etc/uhttpd in every uhttpd instance. This makes it
possible to configure a single instance with an unconditional redirect,
which currently renders all other uhttpd instances unusable.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Mon, 23 Aug 2021 19:48:06 +0000 (21:48 +0200)]
odhcpd: update to latest git HEAD
01b4e60 dhcpv4: fix uninitialized hostname in some ubus events
1666769 dhcpv6-ia: allow up to 64 bit wide hostid
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Stijn Tintel [Mon, 23 Aug 2021 11:06:35 +0000 (14:06 +0300)]
base-files: fix option to make /var persistent
The option was initially named TARGET_ROOTFS_LN_VAR_TMP, and the check
was correct. When renaming the option to something more suitable, the
check was changed to check for n, but when an option is not set, it's
not n but empty. This results in the check always evaluating to false.
Fix the check by checking for y with ifneq.
Fixes: 57807f50ded6 ("base-files: add option to make /var persistent")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Zoltan HERPAI [Mon, 7 Sep 2020 16:52:31 +0000 (18:52 +0200)]
ath79: add support for Atheros DB120 reference board
Atheros DB120 reference board.
Specifications:
SoC: QCA9344
DRAM: 128Mb DDR2
Flash: 8Mb SPI-NOR, 128Mb NAND flash
Switch: 5x 10/100Mbps via AR8229 switch (integrated into SoC),
5x 10/100/1000Mbps via QCA8237 via RGMII
WLAN: AR9300 (SoC, 2.4G+5G) + AR9340 (PCIe, 5G-only)
USB: 1x 2.0
UART: standard QCA UART header
JTAG: yes
Button: 1x reset
LEDs: a lot
Slots: 2x mPCIe + 1x mini-PCI, but using them requires
additional undocumented changes.
Misc: The board allows to boot off NAND, and there is
I2S audio support as well - also requiring
additional undocumented changes.
Installation:
1. Original bootloader
Connect the board to ethernet
Set up a server with an IP address of 192.168.1.10
Make the openwrt-ath79-generic-atheros_db120-squashfs-factory.bin
available via TFTP
tftpboot 0x80060000 openwrt-ath79-generic-atheros_db120-squashfs-factory.bin
erase 0x9f050000 +$filesize
cp.b $fileaddr 0x9f050000 $filesize
2. pepe2k's u-boot_mod
Connect the board to ethernet
Set up a server with an IP address of 192.168.1.10
Make the openwrt-ath79-generic-atheros_db120-squashfs-factory.bin
available via TFTP, as "firmware.bin"
run fw_upg
Reboot the board.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
[explicit factory recipe in generic.mk, sorting in 10-ath9k-eeprom,
convert to nvmem, use fwconcat* names in DTS, remove unneeded DT
labels, remove redundant uart node]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Russell Senior [Fri, 13 Aug 2021 05:57:41 +0000 (22:57 -0700)]
ath79: add support for Ubiquiti PowerBeam M2 (XW)
This patch adds support for the Ubiquiti PowerBeam M2 (XW), e.g. PBE-M2-400,
a 802.11n wireless with a feed+dish form factor. This device was previously
supported by the ar71xx loco-m-xw firmware.
Specifications:
- Atheros AR9342 SoC
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in
- Power and LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1)
Flashing via stock GUI:
- Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see
https://openwrt.org/toh/ubiquiti/powerbeam installation instructions)
- Upload the factory image via AirOS web GUI.
Flashing via TFTP:
- Use a pointy tool (e.g., unbent paperclip) to keep the
reset button pressed.
- Power on the device (keep reset button pressed).
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button.
- The device starts a TFTP server at 192.168.1.20.
- Set a static IP on the computer (e.g., 192.168.1.21/24).
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-ubnt_powerbeam-m2-xw-squashfs-factory.bin
WARNING: so far, no non-destructive method has been discovered for
opening the enclosure to reach the serial console. Internal photos
are available here: https://fcc.io/SWX-NBM2HP
Signed-off-by: Russell Senior <russell@personaltelco.net>
Russell Senior [Fri, 13 Aug 2021 05:57:39 +0000 (22:57 -0700)]
ath79: rename Ubiquiti PowerBeam M (XW) to PowerBeam M5 (XW)
The commit [1] added support for Ubiquiti PowerBeam M (XW), tested
on the PBE-M5-400. But, it turns out the PBE-M2-400 has a different
ethernet configuration, so make the support specific to the m5 version
in anticipation of adding specific support for the m2 in a separate
commit.
[1]
12eb5b2384a6 ("ath79: add support for Ubiquiti PowerBeam M (XW)")
Signed-off-by: Russell Senior <russell@personaltelco.net>
[fix model name in DTS, format commit reference in commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Stijn Tintel [Mon, 25 Feb 2019 13:05:07 +0000 (15:05 +0200)]
base-files: add option to make /var persistent
In OpenWrt, /var is symlinked to /tmp by default. This is done to reduce
the amount of writes to the flash chip, which often have not the
greatest durability. As a result, things like DHCP or UPnP lease files,
are not persistent across reboots.
Since OpenWrt can run on devices with more durable storage, it makes
sense to have an option for a persistent /var. Add an option to make
/var persistent. When enabled, /var will no longer be symlinked to /tmp,
but /var/run will be symlink to /tmp/run, as it should contains only
files that should not be kept during reboot. The option is off by
default, to maintain the current behaviour.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Sun, 22 Aug 2021 14:57:39 +0000 (17:57 +0300)]
lldpd: bump to 1.0.12
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Daniel Golle [Sun, 22 Aug 2021 13:32:44 +0000 (14:32 +0100)]
mediatek: mt7623: enable clock drivers for Mali-450 and audio
Built clock drivers for G3DSYS and AUDSYS into the kernel to allow
multimedia features (GPU and audio) to work if they exist.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Shane Synan [Thu, 19 Aug 2021 18:22:48 +0000 (14:22 -0400)]
ipq806x: fix min<>target opp-microvolt DTS mixup
Rearrange all voltage triplets for "opp_table0" to match the
specifications. "opp-microvolt" and "opp-microvolt-<name>" triplets
are in order of <target min max>, and NOT <min target max>.
Previously, the CPU would *always* spend its time at the "minimum"
voltage, ignoring the actual intended target. This is a regression
from previous behavior.
On an NBG6817 with a Qualcomm CPU of PVS bin #2...
(see &opp_table0 -> opp-
1725000000 -> opp-microvolt-speed0-pvs2-v0)
* Before:
/usr/bin/tail -n +1 /sys/kernel/debug/opp/cpu0/opp\:
1725000000/supply-0/u_volt_*
==> /sys/kernel/debug/opp/cpu0/opp:
1725000000/supply-0/u_volt_max <==
1260000
==> /sys/kernel/debug/opp/cpu0/opp:
1725000000/supply-0/u_volt_min <==
1200000
==> /sys/kernel/debug/opp/cpu0/opp:
1725000000/supply-0/u_volt_target <==
1140000
* After:
/usr/bin/tail -n +1 /sys/kernel/debug/opp/cpu0/opp\:
1725000000/supply-0/u_volt_*
==> /sys/kernel/debug/opp/cpu0/opp:
1725000000/supply-0/u_volt_max <==
1260000
==> /sys/kernel/debug/opp/cpu0/opp:
1725000000/supply-0/u_volt_min <==
1140000
==> /sys/kernel/debug/opp/cpu0/opp:
1725000000/supply-0/u_volt_target <==
1200000
To check voltages and frequencies at run time, use...
/bin/cat /sys/kernel/debug/regulator/regulator_summary &&
/bin/cat /sys/kernel/debug/clk/clk_summary | grep "hfpll"
See
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/Documentation/devicetree/bindings/opp/opp.txt?h=v5.4.142#n91
Fixes: 1e25423be8ac ("ipq806x: refresh dtsi patches")
Signed-off-by: Shane Synan <digitalcircuit36939@gmail.com>
Reviewed-by: Ansuel Smith <ansuelsmth@gmail.com>
[commit message style cleanup, another kernel refresh]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sat, 21 Aug 2021 21:38:12 +0000 (23:38 +0200)]
ramips: add label MAC address for Onion Omega 2(+)
Thanks to a hint from Michael Siegenthaler in
4b4fa2f9fed7 ("ramips:
fix ethernet MAC address on Omega2"), the label MAC address of
the Onion Omega 2(+) can be set based on its documentation [1].
[1] https://docs.onion.io/omega2-docs/mac-address.html
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Kevin Darbyshire-Bryant [Sat, 21 Aug 2021 19:08:07 +0000 (20:08 +0100)]
firmware-utils: fix build on not Linux
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Jan Hoffmann [Sat, 21 Aug 2021 16:25:14 +0000 (18:25 +0200)]
ltq-vdsl: add missing backslash
This error was introduced with the recent cleanup.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Álvaro Fernández Rojas [Sat, 21 Aug 2021 08:56:42 +0000 (10:56 +0200)]
bcm27xx: switch to kernel 5.10
After testing it on RPi B+ and RPi 4B it seems stable enough to enable it on
OpenWrt master.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sat, 21 Aug 2021 08:54:34 +0000 (10:54 +0200)]
bcm27xx: add kernel 5.10 support
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sat, 21 Aug 2021 08:50:21 +0000 (10:50 +0200)]
generic: fix debloat dma-buf 5.10 patch
The current patch produces the following error when CONFIG_DMABUF_HEAPS is
enabled:
drivers/built-in.a: member drivers/dma-buf/heaps in archive is not an object
Fixes: b10d6044599d ("kernel: add linux 5.10 support")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sat, 21 Aug 2021 08:48:07 +0000 (10:48 +0200)]
generic: add missing 5.10 config symbols
These symbols are needed for bcm27xx 5.10 kernel support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sat, 21 Aug 2021 17:05:14 +0000 (19:05 +0200)]
bcm27xx-gpu-fw: update to latest version
Multiple firmware fixes needed for kernel updates.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sat, 21 Aug 2021 17:03:24 +0000 (19:03 +0200)]
bcm27xx-userland: update to latest version
Properly recognise all BCM2711 variants
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Daniel Golle [Sat, 21 Aug 2021 14:32:13 +0000 (15:32 +0100)]
mediatek: mt7623: backport musb, improve HDMI console
Backport support for dual-role USB 2.0 as that's what is actually
built-into MT7623.
Improve HDMI console by enabling VT and setting up tty1..tty6.
Re-add accidentally removed CONFIG_ARM_ARCH_TIMER.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Andre Heider [Tue, 10 Aug 2021 10:22:17 +0000 (12:22 +0200)]
prereq-build: require python3-distutils
Debian and Ubuntu ship a python3-minimal package which does not include
the distutils module. This is not supported by upstream and can be
considered a broken python distribution.
In practice, many scripts depend on said module, and this is a reoccuring
pain point for building various OpenWrt packages.
Require and check for said module, enough time has been wasted on this.
A list of just the most recent issues:
https://github.com/openwrt/packages/pull/16304
https://github.com/openwrt/packages/pull/16027
https://github.com/openwrt/packages/pull/15443
https://github.com/openwrt/packages/pull/14394
https://github.com/openwrt/packages/pull/12909
https://github.com/openwrt/packages/issues/12443
https://github.com/openwrt/packages/pull/11035
https://github.com/openwrt/packages/issues/10993
Signed-off-by: Andre Heider <a.heider@gmail.com>
Michael Siegenthaler [Thu, 19 Aug 2021 00:58:56 +0000 (17:58 -0700)]
ramips: fix ethernet MAC address on Omega2
According to https://docs.onion.io/omega2-docs/mac-address.html, 0x28 is
the correct location to read the address on Onion Omega 2(+) devices.
This fixes a regression introduced by commit
77e850fe76e3 ("ramips: tidy up
MAC address setup for Linkit Smart and Omega2"), which was a cleanup that
intended to preserve existing behavior. In my testing with v19.07.7,
however, the MAC address determined from the device tree takes precedence
over the one set by 02_network, so the aforementioned commit actually
changed the behavior.
Signed-off-by: Michael Siegenthaler <msiegen@google.com>
[Adapt patch to nvmem usage]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Jan Hoffmann [Thu, 19 Aug 2021 16:51:45 +0000 (18:51 +0200)]
ltq-vdsl/ltq-vdsl-app: clean up configure args
The userspace application now uses the model=full option to match the
configuration of the kernel module. The source no longer contains SOAP
support, which was the primary reason to build only typical instead
of full before.
This makes several CLI commands, which were already supported in the
kernel module, available in the userspace application. For example, this
includes bbsg which allows to get information about VDSL2 bands.
Some previously applied build options were redundant. Disabling ADSL MIB
support is unnecessary, as it only applies to Danube. ADSL LED support
is no longer included in the source. ReTx counters are already included
with model type full.
This increases the size of the userspace application by approximately
15 kB (uncompressed). The kernel module does not change at all.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Vincent Wiemann [Mon, 2 Aug 2021 22:21:46 +0000 (00:21 +0200)]
firmware-utils: add support for ZyXEL ZLD firmware
This commit adds a tool for extracting and creating firmware archives for:
- ZyXEL NWA5121-N
- ZyXEL NWA5121-NI
- ZyXEL NWA5123-NI
- ZyXEL NWA5123-AC
- ZyXEL NWA5301
- ZyXEL NWA3560N v2
- ZyXEL WAC6100
- ZyXEL WAC6500
And maybe others...
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
Fritz D. Ansel [Mon, 2 Aug 2021 18:38:31 +0000 (20:38 +0200)]
dropbear: allow to use with xinetd
with xinetd allowed+blocked (ipv6) hosts could be set
what is not possible with stock dropbear package
The file size increased 12 Bytes, so this "opimisation" did not really helped.
Within a compressed storage format it is 0..
ipk: 111.171 -> 111.361 = 190 bytes
bin: 215.128 -> 215.140 = 12 bytes
Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
John Audia [Wed, 18 Aug 2021 12:06:08 +0000 (08:06 -0400)]
kernel: bump 5.4 to 5.4.142
Removed upstreamed:
hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch
All other patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Sun, 15 Aug 2021 13:13:34 +0000 (09:13 -0400)]
kernel: bump 5.4 to 5.4.141
All patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Rui Salvaterra [Wed, 18 Aug 2021 23:19:24 +0000 (00:19 +0100)]
kernel: bump 5.10 to 5.10.60
No deleted or manually refreshed patches.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Rosen Penev [Sat, 28 Mar 2020 23:55:45 +0000 (16:55 -0700)]
gdb: update to 10.2
Replace some OpenWrt patches with openembedded ones for easier
maintainability. Remove several outdated ones as well.
Replace PKG_RELEASE with AUTORELEASE to avoid manual bumps.
Remove !arc dependency as it is supported upstream now.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Golle [Sat, 21 Aug 2021 03:34:15 +0000 (04:34 +0100)]
mediatek: mt7623: enable more hardware features
In order to make HDMI console available on the BananaPi BPi-R2 select
various Kconfig symbols which are useful for systems with graphics.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 21 Aug 2021 03:31:57 +0000 (04:31 +0100)]
uboot-mediatek: pass console=tty1 for BPi-R2
BananaPi BPi-R2 comes with HDMI and MIPI-DSI. Use dislpay facility in
Linux by add "console=tty1" boot argument.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hauke Mehrtens [Sun, 15 Aug 2021 15:39:40 +0000 (17:39 +0200)]
kernel: Do not deactivate staging drivers
Do not deactivate the kernel configuration symbol CONFIG_STAGING in the
target configurations any more. This prevented the build of the exfat.ko
for example.
Fixes: FS#3979
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 14 Aug 2021 12:04:02 +0000 (14:04 +0200)]
layerscape: Do not activate ext2 and ext3 driver options
The ext3 driver was already removed, the kernel config options are only
there for backwards compatibility. The eth4 driver takes care of ext3
file systems. The ext4 driver also handled ext2 file systems.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 14 Aug 2021 12:02:41 +0000 (14:02 +0200)]
archs38: Do not activate ext3 driver options
The ext3 driver was already removed, the kernel config options are only
there for backwards compatibility. The eth4 driver takes care of ext3
file systems.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 20 Aug 2021 22:08:42 +0000 (00:08 +0200)]
at91bootstrap: Fix compile with binutils 2.36
This fixes a build problem seen after binutils 2.36 is used by default.
Fixes: 3f41153b1c28 ("toolchain/binutils: switch to version 2.36.1 by default")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 20 Aug 2021 22:07:54 +0000 (00:07 +0200)]
uboot-at91: fix dtc compilation on host gcc 10
Backport a patch from upstream U-Boot to fix the compile with host GCC 10.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Stijn Tintel [Fri, 20 Aug 2021 20:45:20 +0000 (23:45 +0300)]
wolfssl: fix build with GCC 10 on 32 x86 targets
Backport upstream patch to fix build with GCC 10 on 32 x86 targets.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Adrian Schmutzler [Fri, 20 Aug 2021 12:42:56 +0000 (14:42 +0200)]
mediatek: convert mtd-mac-address to nvmem for MT7629 RFB
This conversion appears to have been overlooked since it's in a
kernel patch.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 20 Aug 2021 12:27:13 +0000 (14:27 +0200)]
lantiq: convert mtd-mac-address to nvmem for Fritz!Box 736x
Convert this series by moving the definitions to the individual
devices.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 19 Aug 2021 22:18:12 +0000 (00:18 +0200)]
ramips: convert mtd-mac-address to nvmem for UniElec devices
Convert this series by moving the definitions to the individual
devices.
Now all devices on ramips are converted.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 19 Aug 2021 22:09:58 +0000 (00:09 +0200)]
ath79: remove redundant nvmem definitions
Due to use of a script when migrating from mtd-mac-address, a few
of the definitions are redundant in DTSI and DTS files. Remove
those and consolidate the definitions in parent DTSI files in a
few cases.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 18 Aug 2021 23:50:27 +0000 (01:50 +0200)]
ramips: remove redundant nvmem definitions
Due to use of a script when migrating from mtd-mac-address, a few
of the definitions are redundant in DTSI and DTS files. Remove
those.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 18 Aug 2021 23:32:56 +0000 (01:32 +0200)]
ramips: fix indent in DTS for GL.iNet VIXMINI/microuter-N300
Use correct indent.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 18 Aug 2021 23:16:39 +0000 (01:16 +0200)]
ramips: convert mtd-mac-address to nvmem for D-Link DIR-8xx
Convert this series by moving the definitions to the individual
devices.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Fri, 20 Aug 2021 00:46:14 +0000 (01:46 +0100)]
selinux-policy: update to version 0.9
592ac0f add a note
4bacd14 sslcertfile: list /etc/ssl
7bdefa4 example: indicate that skip is an option
d1e9a85 wifi: sys pipe usage
eb903e1 README: add note about policycoreutils-setfiles weak dependency
762e011 ttyd: signull all subjects
fbfc079 acme: add basic support for acme_cleanup.sh and acme_setup.sh
9ac7592 acme: transition to sys.subj on generic initscript execution
f3dd1ba acme: missing rules related to sys.subj trans on file.initscriptfile
ae273fa odhcp6c/netifd: support drop-in directories
5fa9b41 subj: do not encourage misconfiguration
44722b6 blockd, logd, odhcpc6, ubiutil, mtdstordev
a775d93 21.02 related
a473691 rcboot runs rcuhttpd which creates /tmp/etc for /tmp/etc/uhttpd
290e9fb rcuhttpd: related to rcboot and uci-defaults
3fc0d8b rcuhttpd: lists /etc/uci-defaults
1f5ef48 removes ubvol.lock policy and adds move mtd/ubi partitions
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 19 Aug 2021 00:23:41 +0000 (01:23 +0100)]
image: fix build with SELinux
The option '-xattr' for mksquashfs4 should be '-xattrs' which lead to
build failure with SELinux enabled. Add the missing 's'.
Fixes: 4baf47b9a8 ("images: squashfs: xattrs should not depend on buld host")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Wed, 18 Aug 2021 18:06:29 +0000 (20:06 +0200)]
ath79: convert remaining mtd-mac-address cases to nvmem
Since the nvmem-based approach for retrieving MAC addresses
appears to depend on the addresses being set up after the
partitions, it is no longer possible to keep the MAC address
setup in shared DTSI files while the partitions itself are
set up in DTS files for the individual devices.
In ath79 the firmware partition is typically located somewhere
"in the middle" of the partition table. Thus, it's not trivial
to share the partitions containing MAC address information in
a common DTSI (like we did in some cases on ramips).
In this commit, MAC address setup is thus moved to the relevant
partitions, and in most cases needs to be duplicated. While
the duplication is not really nice, it eventually provides a
cleaner and more tidy setup, making the DTS(I) file
fragmentation a bit more logical. This should also help
with adding new devices, as information is distributed across
less locations.
For consistency, this commit also moves the mtd-cal-data property
"down" together with the MAC address setup, so it's not based
on a partition before the latter is defined either. (This is
only done for those files touched due to nvmem conversion.)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Tue, 17 Aug 2021 18:53:27 +0000 (20:53 +0200)]
ramips: convert most mtd-mac-address cases in DTSI to nvmem
Convert most of the cases from mtd-mac-address to nvmem where
MAC addresses are set in the DTSI, but the partitions are only
located in the device DTS. This posed some problems earlier, since
in these cases we are using partitions before they are defined,
and the nvmem system did not seem to like that.
There have been a few different resolution approaches, based on
the different tradeoffs of deduplication vs. maintainability:
1. In many cases, the partition tables were identical except for
the firmware partition size, and the firmware partition was
the last in the table.
In these cases, the partition table has been moved to the
DTSI, and only the firmware partition's "reg" property has
been kept in the DTS files. So, the updated nvmem definition
could stay in the DTSI files as well.
2. For all other cases, splitting up the partition table would
have introduced additional complexity. Thus, the nodes to be
converted to nvmem have been moved to the DTS files where the
partitioning was defined.
3. For Netgear EX2700 and WN3000RP v3, the remaining DTSI file
was completely dissolved, as it was quite small and the name
was not really nice either.
4. The D-Link DIR-853 A3 was converted to nvmem as well, though
it is just a plain DTS file not taken care of in the first
wave.
In addition, some minor rearrangements have been made for tidyness.
Not covered (yet) by this patch are:
* Various unielec devices
* The D-Link DIR-8xx family
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Michael Heimpold [Sat, 27 Mar 2021 19:48:30 +0000 (20:48 +0100)]
bcm27xx-userland: factor out a -dev package
Installing headers and static libraries to the target system seems
to be not required for most use cases, so let's factor them
out into a dedicated -dev package.
This cuts down to disk usage to around 50% of the original
package to ~ 2MB - not that disk space is an issue normally,
but when using inside an initramfs only project, it counts.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Stijn Tintel [Thu, 13 May 2021 16:45:48 +0000 (19:45 +0300)]
toolchain/gcc: switch to version 10 by default
Runtime-tested on:
* ath79
* bcm27xx/bcm2708
* bcm27xx/bcm2709
* bcm27xx/bcm2711
* mvebu/cortexa53
* octeon
* realtek
* x86/64
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Stijn Tintel [Thu, 13 May 2021 16:54:34 +0000 (19:54 +0300)]
toolchain/binutils: switch to version 2.36.1 by default
Runtime-tested on:
* ath79
* bcm27xx/bcm2708
* bcm27xx/bcm2709
* bcm27xx/bcm2711
* mvebu/cortexa53
* octeon
* realtek
* x86/64
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Stijn Tintel [Wed, 18 Aug 2021 17:45:14 +0000 (20:45 +0300)]
umbim: bump to git HEAD
de56231 umbim: fix compilation with GCC 10
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Stijn Tintel [Thu, 13 May 2021 13:23:26 +0000 (16:23 +0300)]
busybox: fix compilation with GCC 10
When compiling busybox with GCC 10 and CONFIG_PKG_ASLR_PIE_ALL=y, there
are hundreds of errors like:
relocation R_MIPS16_26 against `xzalloc' cannot be used when making a
shared object; recompile with -fPIC
Simply solve this by no longer disabling PKG_ASLR_PIE, so that $(FPIC)
is properly added to the CFLAGS and LDFLAGS.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Stijn Tintel [Wed, 18 Aug 2021 13:11:11 +0000 (16:11 +0300)]
ipq40xx: fix Edgecore ECW5211 boot
The bootloader will look for a configuration section named ap.dk01.1-c2
in the FIT image. If this doesn't exist, the device won't boot.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
David Yang [Sun, 25 Jul 2021 13:21:02 +0000 (21:21 +0800)]
ramips: add WPS button for newifi d1
This device has a WPS button under WiFi antenna cover, add it to dts.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Adrian Schmutzler [Tue, 17 Aug 2021 12:07:57 +0000 (14:07 +0200)]
ramips: mt7628: move mtd-eeprom out of root DTSI
The mt76x8 subtarget is the only one in ramips that stores the
mediatek,mtd-eeprom property directly in the "root" mt7628an.dtsi.
This is not optimal for a few different reasons:
* If you don't really know it or are used to other (sub)targets,
the property will be set somewhat magically.
* The property is set based on &factory partition before (if at all)
this partition is defined.
* There are several devices that have different offset or even
different partitions to read from, which will then be overwritten
in the DTS files. Thus, definitions are scattered between root
DTSI and individual files.
Based on these circumstances, the "root" definition is removed and
the property is added to the device-based DTS(I) files where needed
and applicable. This should be easier to grasp for unexperienced
developers and will move the property closer to the partition
definitions.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Rui Salvaterra [Sun, 15 Aug 2021 22:54:28 +0000 (23:54 +0100)]
kernel: bump 5.10 to 5.10.59
No deleted or manually refreshed patches.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Daniel Golle [Sat, 7 Aug 2021 13:30:53 +0000 (14:30 +0100)]
base-files: rename 'sdcard' to 'legacy-sdcard'
While an image layout based on MBR and 'bootfs' partition may be easy
to understand for users who are very used to the IBM PC and always have
the option to access the SD card outside of the device (and hence don't
really depend on other recovery methods or dual-boot), in my opinion
it's a dead end for many desirable features on embedded systems,
especially when managed remotely (and hence without an easy option to
access the SD card using another device in case things go wrong, for
example).
Let me explain:
* using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a
single corruption of the bootfs can render the system into a state
that it no longer boots at all. This makes dual-boot useless, or at
least very tedious to setup with then 2 independent boot partitions
to avoid the single point of failure on a "hot" block (the FAT index
of the boot partition, written every time a file is changed in
bootfs). And well: most targets even store the bootloader environment
in a file in that very same FAT filesystem, hence it cannot be used
to script a reliable dual-boot method (as loading the environment
itself will already fail if the filesystem is corrupted).
* loading the kernel uImage from bootfs and using rootfs inside an
additional partition means the bootloader can only validate the
kernel -- if rootfs is broken or corrupted, this can lead to a reboot
loop, which is often a quite costly thing to happen in terms of
hardware lifetime.
* imitating MBR-boot behavior with a FAT-formatted bootfs partition
(like IBM PC in the 80s and 90s) is just one of many choices on
embedded targets. There are much better options with modern U-Boot
(which is what we use and build from source for all targets booting
off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623.
Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix
functions with 'legacy_sdcard_' instead of 'sdcard_'.
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 15 Aug 2021 16:41:59 +0000 (17:41 +0100)]
procd: add missing dependency and fix empty mount triggers
procd.sh:
Instead of triggering on every mount.add event, there should be no
mount trigger at all in case none of the directories passed to
procd_add_*_mount_trigger() are located on a mountpoint configured in
/etc/config/fstab.
uxc:
add missing dependency on rpcd.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 15 Aug 2021 14:41:50 +0000 (15:41 +0100)]
procd: update to git HEAD
040fecc system: fix issues reported by Coverity
48f481b service: make sure string read is null terminated
16dbc2a uxc: fix a bunch of issues discovered by Coverity
ff9002f uxc: fix help output
104b49d uxc: support config in uvol
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Kevin Darbyshire-Bryant [Sat, 14 Aug 2021 18:10:32 +0000 (19:10 +0100)]
firewall: update to git HEAD
40e5f6a ipsets: permit default timeout of 0
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
David Bauer [Mon, 9 Aug 2021 23:05:50 +0000 (01:05 +0200)]
uboot-rockchip: update to v2021.07
Tested on NanoPi R2S
Signed-off-by: David Bauer <mail@david-bauer.net>
John Audia [Thu, 12 Aug 2021 13:28:18 +0000 (09:28 -0400)]
kernel: bump 5.4 to 5.4.140
Removed upstreamed bcm27xx/patches-5.4:
950-0977-USB-gadget-f_hid-avoid-crashes-and-log-spam.patch
950-0980-SQUASH-USB-gadget-f_hid-remove-more-spam.patch
All other patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Mon, 9 Aug 2021 14:47:18 +0000 (10:47 -0400)]
kernel: bump 5.4 to 5.4.139
All patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Daniel Golle [Sat, 14 Aug 2021 18:01:37 +0000 (19:01 +0100)]
procd: update to git HEAD
48638ad hotplug-dispatch: yet another rare memory leak disovered by Coverity
459b3e8 jail: fix several issues discovered by Coverity
2562e2b ujail-console: add missing error handling discovered by coverity
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 14 Aug 2021 17:56:12 +0000 (18:56 +0100)]
fstools: update to git HEAD
629726d blockd: fix resource leak discovered by coverity scan
68ae639 libubi: fix several issues discovered by Coverity
a77c4fa ubi: fix resource leak in legacy codepath
2e3aca2 block: fix two resources leaks discovered by Coverity
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rui Salvaterra [Thu, 12 Aug 2021 23:16:29 +0000 (00:16 +0100)]
kernel: bump 5.10 to 5.10.58
No deleted or manually refreshed patches.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Rui Salvaterra [Mon, 9 Aug 2021 21:05:05 +0000 (22:05 +0100)]
kernel: bump 5.10 to 5.10.57
No deleted or manually refreshed patches.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
David Bauer [Fri, 13 Aug 2021 21:28:44 +0000 (23:28 +0200)]
ipq40xx: ar40xx: reset port status register
This resolves incosnsitencies of the configured RX / TX flow control
modes between different boards or bootloaders.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Fri, 13 Aug 2021 22:22:28 +0000 (00:22 +0200)]
ipq40xx: ar40xx: use FIELD_GET macro
This improves code readability.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 14 Aug 2021 00:20:40 +0000 (02:20 +0200)]
ipq40xx: increase EX6150v2 SPI frequency
The chip supports clock speeds up to 50 MHz, however it won't even read
the chip-id correctly at this frequency.
45 MHz however works reliable.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Fri, 13 Aug 2021 03:45:17 +0000 (04:45 +0100)]
procd: update to git HEAD
9f233f5 system: make rootfs type accessible through board call
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Thu, 12 Aug 2021 22:50:49 +0000 (00:50 +0200)]
bcm4908: add missing config symbol
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Thu, 12 Aug 2021 21:40:32 +0000 (23:40 +0200)]
mediatek: add missing config symbols
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Thu, 12 Aug 2021 21:22:08 +0000 (23:22 +0200)]
tegra: add missing Kconfig symbol
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Thu, 12 Aug 2021 20:19:45 +0000 (22:19 +0200)]
rockchip: add missing Kconfig symbols
Signed-off-by: David Bauer <mail@david-bauer.net>
Ansuel Smith [Mon, 2 Aug 2021 11:41:21 +0000 (13:41 +0200)]
6in4: delete tunnel on interface teardown
Delete tunnel on 6in4 interface teardown.
Should solve problem related to tunnel stuck on restart loop
with "Unknown Command" on tunnel restart due to wan connection drop.
Fixes: FS#3690
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Felix Fietkau [Wed, 11 Aug 2021 17:00:22 +0000 (19:00 +0200)]
hostapd: fix broken check in radar detection notification
This check was accidentally left in after reworking the code,
causing a segfault
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Wed, 11 Aug 2021 00:11:17 +0000 (02:11 +0200)]
generic: add missing config symbol
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 11 Aug 2021 00:09:25 +0000 (02:09 +0200)]
mediatek: add missing config symbol
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Tue, 10 Aug 2021 18:22:18 +0000 (20:22 +0200)]
treewide: add various missing config symbols
Fixes commit
91a52f22a13d ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Thu, 22 Jul 2021 23:32:38 +0000 (01:32 +0200)]
generic: Kconfig: exit on unset symbol
When a target configuration has unser Kconfig symbols, the build will
fail when OpenWrt is compiled with V=s and stdin is connected to a tty.
In case OpenWrt is compiled without either of these preconditions, the
build will uscceed with the symbols in question being unset.
Modify the kernel configuration in a way it fails on unset symbols
regardless of the aformentioned preconditions.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 9 Aug 2021 22:28:01 +0000 (00:28 +0200)]
generic: fix kernel panic on existing mac-address node
Calling free for the OF property can result in a kernel panic, as the
buffer in question might be referenced elsewhere. Also, it is not
removed from the tree.
Always allocate a new property and updating the tree with it fixes both
issues.
Fixes commit
91a52f22a13d ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: David Bauer <mail@david-bauer.net>
Rafał Miłecki [Fri, 6 Aug 2021 10:59:23 +0000 (12:59 +0200)]
firmware-utils: nand_ecc: replace GPL boilerplate with SPDX
Cc: yajin <yajin@vm-kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 6 Aug 2021 10:59:22 +0000 (12:59 +0200)]
firmware-utils: trx: replace GPL-2.0-or-later boilerplate with SPDX
This was missed because scancode license scanner was confused by
comments about crc32buf().
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 6 Aug 2021 10:59:21 +0000 (12:59 +0200)]
firmware-utils: osbridge-crc: replace GPL-2.0-only boilerplate with SPDX
This was missed because scancode license scanner was confused by
comments about crc32buf().
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Gabor Juhos <juhosg@freemail.hu>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 6 Aug 2021 10:59:20 +0000 (12:59 +0200)]
firmware-utils: mkmylofw: replace GPL-2.0-or-later boilerplate with SPDX
This was missed because scancode license scanner was confused by a
comment about (no) copyrights in the init_crc_table().
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Gabor Juhos <juhosg@freemail.hu>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 6 Aug 2021 10:59:19 +0000 (12:59 +0200)]
firmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX
This was missed because scancode license scanner was confused by a
comment about Cisco's GPL code github repository.
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Hauke Mehrtens [Sun, 8 Aug 2021 23:13:05 +0000 (01:13 +0200)]
omap: Remove EXT2 and EXT3 driver config
The EXT4 driver also takes care of EXT2 and EXT3 file systems.
Activating the EXT2 driver kernel config options unlocked some other
ext2 driver related options which OpenWrt did not take care of.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 8 Aug 2021 22:03:43 +0000 (00:03 +0200)]
uboot-layerscape: fix dtc compilation on host gcc 10
Backport a patch from upstream U-Boot to fix the compile with host GCC 10.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 8 Aug 2021 20:50:27 +0000 (22:50 +0200)]
layerscape: Fix multiple bugs in of_get_mac_address() changes
The change which backported the of_get_mac_address() change broke some
patches in the layerscape target so the patches did not apply any more.
This commit makes them apply again and also fixes some other problems
related to this change.
Fixes commit
91a52f22a13d ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 8 Aug 2021 20:38:12 +0000 (22:38 +0200)]
kernel: Apply change to of_get_mac_address() to ks8851 too
The code from ks8851.c was moved to ks8851_common.c, so it was not
backported. This broke the compile of the omap target which uses this
driver.
Fixes commit
91a52f22a13d ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Josef Schlehofer [Tue, 27 Jul 2021 11:20:43 +0000 (13:20 +0200)]
mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz
This patch is backported from linux-arm-kernel [1] to improve situation, when
it was reported that 1.2 GHz variant is unstable with DFS.
It waits to be accepted upstream, however, it waits for Marvell people to respond.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/
20210630225601.6372-1-kabel@kernel.org/
Fixes: 7b868fe04a89 ("Revert "mvebu: 5.4 fix DVFS caused random boot crashes"")
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Josef Schlehofer [Tue, 27 Jul 2021 11:20:42 +0000 (13:20 +0200)]
Revert "mvebu: 5.10 fix DVFS caused random boot crashes"
Based on the discussion on the mailing list [1], the patch which was
reverted, it reverts only one patch without the subsequent ones.
This leads to the SoC scaling issue not using a CPU parent clock, but
it uses DDR clock. This is done for all variants, and it's wrong because
commits (hacks) that were using the DDR clock are no longer in the mainline kernel.
If someone has stability issues on 1.2 GHz, it should not affect all
routers (1 GHz, 800 MHz) and it should be rather consulted with guys, who are trying to
improve the situation in the kernel and not making the situation worse.
There are two solutions in cases of instability:
a) disable cpufreq
b) underclock it up to 1 GHz
This reverts commit
080a0b74e39d159eecf69c468debec42f28bf4d8.
[1] https://lists.openwrt.org/pipermail/openwrt-devel/2021-June/035702.html
Fixes: d37947681772 ("mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz")
CC: Pali Rohár <pali@kernel.org>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Rosen Penev [Tue, 13 Jul 2021 20:32:30 +0000 (13:32 -0700)]
pcre: update to 8.45
Switch to AUTORELEASE to avoid manual increments.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 13 Jul 2021 20:30:24 +0000 (13:30 -0700)]
nettle: update to 3.7.3
Switch to AUTORELEASE to avoid manual increments.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 13 Jul 2021 20:27:09 +0000 (13:27 -0700)]
mbedtls: update to 2.16.11
Switched to AUTORELEASE to avoid manual increments.
Release notes:
https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.11
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 13 Jul 2021 20:24:54 +0000 (13:24 -0700)]
libpcap: update to 1.10.1
Switch to AUTORELEASE to avoid manual increments.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 13 Jul 2021 20:19:08 +0000 (13:19 -0700)]
libnftnl: update to 1.2.0
Switch to AUTORELEASE to avoid manual increments.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
projects / openwrt / staging / neocturne.git / log