Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: use backport_ prefix for main compat module calls
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for uidgid
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for pm_qos_params
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for kfifo
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for crc8
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for cordic
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.8
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.7
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.4
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.3
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.2
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.1
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.0
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.39
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.38
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.37
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.36
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.35
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.34
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.33
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.32
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.31
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.29
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.28
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.27
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.26
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.25
There is one change needed here to get compilation
working on v2.6.24, strict_strtoull is now being
redefined and because of a change that went into
v2.6.38.4 kstrtoul() was added there and the old
strict_strtoul was made a define from it. To help
aid the older kernels such as 2.6.24 that need
the old strict_strtoul we simply check if strict_strtoull
is defined, then we know you're on >= 2.6.38.4 and
don't need kstrtoul() and friends.
If strict_strtoull ever needs to be backported for
older kernels we'll have to revisit this check.
It is worth documenting here why this change went into
v2.6.38.4 and not the orignal v2.6.38 release, so
the commit is provided.
commit
280a1c38c907ab1e2617bdcef66de6bc70897253
Author: Alexey Dobriyan <adobriyan@gmail.com>
kstrto*: converting strings to integers done (hopefully) right
commit
33ee3b2e2eb9b4b6c64dcf9ed66e2ac3124e748c upstream.
1. simple_strto*() do not contain overflow checks and crufty,
libc way to indicate failure.
2. strict_strto*() also do not have overflow checks but the name and
comments pretend they do.
3. Both families have only "long long" and "long" variants,
but users want strtou8()
4. Both "simple" and "strict" prefixes are wrong:
Simple doesn't exactly say what's so simple, strict should not exist
because conversion should be strict by default.
The solution is to use "k" prefix and add convertors for more types.
Enter
kstrtoull()
kstrtoll()
kstrtoul()
kstrtol()
kstrtouint()
kstrtoint()
kstrtou64()
kstrtos64()
kstrtou32()
kstrtos32()
kstrtou16()
kstrtos16()
kstrtou8()
kstrtos8()
Include runtime testsuite (somewhat incomplete) as well.
strict_strto*() become deprecated, stubbed to kstrto*() and
eventually will be removed altogether.
Use kstrto*() in code today!
Note: on some archs _kstrtoul() and _kstrtol() are left in tree, even if
they'll be unused at runtime. This is temporarily solution,
because I don't want to hardcode list of archs where these
functions aren't needed. Current solution with sizeof() and
__alignof__ at least always works.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tested with ckmake:
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.24
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.23
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: add LINUX_BACKPORT() for prefixing symbols
Ben Hutchings <ben@decadent.org.uk> notes that "compat"
is already taken as a prefix for symbols and while this
is only slightly true in practice its best we avoid any
future issues.
Others in the past have noted issues with symbols exported
by backporting effort to conflict with other symbols that
might be preferred by the running kernel. In the worst
case scenerio we'd have the same subsystems with two eras
with two sets of drivers using a subystem from an era each.
This patch doesn't address that but tries to address the
namespace conflict by compat itself. The best alternative I
was hoping for was to use core module symbol namespaces but
after reviewing that effort introduced in 2007
by Andi Kleen [0] I see in the end Rusty Russell nack'd
these patches [1] so we're left with dealing with symbol
renaming.
Define LINUX_BACKPORT() to be used to allow us to rename
symbols with a backport_ prefix. The the cleanest, but
its a start.
[0] http://thread.gmane.org/gmane.linux.network/78674
[1] http://article.gmane.org/gmane.linux.kernel/606885
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: use EXPORT_SYMBOL_GPL()
This was the intent all along, however some symbols have
slipped. The goal is always clear: if you are using any
of this code at run time this is making your code derivative
works of the Linux kernel and therefore GPLv2.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 15 Mar 2013 02:05:47 +0000 (19:05 -0700)]
compat: fix ckmake to skip same base kernels
The ckmake script was allowing testing of compilation
of kernels even if the base kernels were the same. This
fixes it to skip them, trimming down test kernel compilation
down and not caring what old kernels you keep on your
system. This also now prints the RC release correctly.
The get_rel_spec() routine is based on the rel-html
get_rel_spec() routine and rel-html is AGPL but since
I wrote it I relicense a modified version of that
routine here to GPLv2.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 14 Mar 2013 22:08:01 +0000 (15:08 -0700)]
compat: backport print_hex_dump_debug()
This backports print_hex_dump_debug() from commit
7a555613, which itself required a definition from
commit
07613b0b.
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains
7a555613
v3.9-rc1~128^2~135
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains
07613b0b
v3.2-rc1~184^2~6
commit
7a555613eb77c69eb6e48b61bc5f72dd42fa1780
Author: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Wed Dec 5 16:48:27 2012 -0500
dynamic_debug: dynamic hex dump
Introduce print_hex_dump_debug() that can be dynamically controlled, similar to
pr_debug.
Also, make print_hex_dump_bytes() dynamically controlled
Implement only 'p' flag (_DPRINTK_FLAGS_PRINT) to keep it simple since hex dump prints
multiple lines and long prefix would impact readability.
To provide line/file etc. information, use pr_debug or similar
before/after print_hex_dump_debug()
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit
07613b0b5ef8570033aa806d1731dce599862223
Author: Jason Baron <jbaron@redhat.com>
Date: Tue Oct 4 14:13:15 2011 -0700
dynamic_debug: consolidate repetitive struct _ddebug descriptor definitions
Replace the repetitive struct _ddebug descriptor definitions with a new
DECLARE_DYNAMIC_DEBUG_META_DATA(name, fmt) macro.
[akpm@linux-foundation.org: s/DECLARE/DEFINE/]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 14 Mar 2013 18:58:10 +0000 (11:58 -0700)]
compat: fix compilation on 2.6.24 based on next-
20130312
drivers/net/wireless/iwlwifi/mvm/mac80211.c ends up
including include/net/inet_hashtables.h which in 2.6.24
has a routine called __inet_lookup_established() that
uses the sk_for_each(1, 2, 3). The patch below by Hauke
backported the change that went into the kernel that
made sk_for_each(1, 3) use two arguments. It turns out
that upstream we realized that the second argument was
useless. The header however uses it though so the trick
didn't work for 2.6.24 if code used it there.
We fix it using a nasty hack by ensuring that when the
header file is included we redefine that routine to
something else, then we udef it, and then define our
new version that only uses the 2 argument form of
sk_for_each(). This is a nasty way to solve it but
not sure if there is anything cleaner.
commit
dbc390647a841061954f67ea226221fc7f4b3836
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun Feb 10 20:10:10 2013 +0100
compat: backport drop of node parameter from iterators
This patch backports the following commit in mainline linux kernel:
commit
0bbacca7c3911451cea923b0ad6389d58e3d9ce9
Author: Sasha Levin <sasha.levin@oracle.com>
Date: Thu Feb 7 12:32:18 2013 +1100
hlist: drop the node parameter from iterators
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 13 Mar 2013 09:51:15 +0000 (02:51 -0700)]
compat: backport rename of random32 to prandom
mcgrof@frijol ~/linux-next (git::master)$ git describe \
--contains
496f2f93b1cc286f5a4f4f9acdc1e5314978683f
v3.8-rc1~74^2~22
commit
496f2f93b1cc286f5a4f4f9acdc1e5314978683f
Author: Akinobu Mita <akinobu.mita@gmail.com>
Date: Mon Dec 17 16:04:23 2012 -0800
random32: rename random32 to prandom
This renames all random32 functions to have 'prandom_' prefix as follows:
void prandom_seed(u32 seed); /* rename from srandom32() */
u32 prandom_u32(void); /* rename from random32() */
void prandom_seed_state(struct rnd_state *state, u64 seed);
/* rename from prandom32_seed() */
u32 prandom_u32_state(struct rnd_state *state);
/* rename from prandom32() */
The purpose of this renaming is to prevent some kernel developers from
assuming that prandom32() and random32() might imply that only
prandom32() was the one using a pseudo-random number generator by
prandom32's "p", and the result may be a very embarassing security
exposure. This concern was expressed by Theodore Ts'o.
And furthermore, I'm going to introduce new functions for getting the
requested number of pseudo-random bytes. If I continue to use both
prandom32 and random32 prefixes for these functions, the confusion
is getting worse.
As a result of this renaming, "prandom_" is the common prefix for
pseudo-random number library.
Currently, srandom32() and random32() are preserved because it is
difficult to rename too many users at once.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: David Laight <david.laight@aculab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 7 Mar 2013 20:58:29 +0000 (12:58 -0800)]
compat: add 3.9-rc1 vanilla kernel to list of kernels to test
This adds the vanilla 3.9-rc1 kernel to the list set list of
test kernels we'll test.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 27 Feb 2013 23:54:58 +0000 (00:54 +0100)]
compat: add file_inode()
This adds a backport for file_inode().
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Tue, 19 Feb 2013 22:26:31 +0000 (23:26 +0100)]
compat: update kernel versions in bin/get-compat-kernels
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 18 Feb 2013 21:37:36 +0000 (22:37 +0100)]
compat: deactivate netdev_set_default_ethtool_ops() for some 3.7 kernels
netdev_set_default_ethtool_ops() was backported in 3.7.8 and compat
should not ship it on any more recent versions any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 19:51:00 +0000 (20:51 +0100)]
compat: backport of lock_map_acquire() and lock_map_release()
This is a backport of:
commit
3295f0ef9ff048a4619ede597ad9ec9cab725654
Author: Ingo Molnar <mingo@elte.hu>
Date: Mon Aug 11 10:30:30 2008 +0200
lockdep: rename map_[acquire|release]() => lock_map_[acquire|release]()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 19:50:02 +0000 (20:50 +0100)]
compat: backport of lock_map_acquire_read()
This is a backport of:
commit
e159489baa717dbae70f9903770a6a4990865887
Author: Tejun Heo <tj@kernel.org>
Date: Sun Jan 9 23:32:15 2011 +0100
workqueue: relax lockdep annotation on flush_work()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 19:33:51 +0000 (20:33 +0100)]
compat: add empty struct watchdog_device
This is needed in some header file but so driver accesses this struct.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 18:23:13 +0000 (19:23 +0100)]
compat: add missing platform devid constants
They are both set to none and will result in no id being added to the
device.
This is a backport of:
commit
689ae231afbac8979f96100b372a5a73458baaa9
Author: Jean Delvare <khali@linux-fr.org>
Date: Fri Jul 27 22:14:59 2012 +0200
platform: Add support for automatic device IDs
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 18:23:00 +0000 (19:23 +0100)]
compat: add PCI_EXP_LNKCAP_SLS_2_5GB and PCI_EXP_LNKCAP_SLS_5_0GB
This is a backport of:
commit
130f1b8f35f14d27c43da755f3c9226318c17f57
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed Dec 26 10:39:23 2012 -0700
PCI: Add PCIe Link Capability link speed and width names
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 21:49:06 +0000 (22:49 +0100)]
compat: move tty_flip_buffer_push() and tty_insert_flip_string()
These backports are also needed for kernel 3.7 and 3.8.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 19:51:22 +0000 (20:51 +0100)]
compat: add kernel 3.8-rc7 and update others
This adds 3.8-rc7 to the get.compat-kernels fetch script and updates
some kernel versions to the last minor version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 20:50:15 +0000 (21:50 +0100)]
compat: check if efi_enabled() was already backported
efi_enabled() gets backported to older kernel versions and if this is
the case compat should not try to do the same.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 19:10:10 +0000 (20:10 +0100)]
compat: backport drop of node parameter from iterators
This patch backports the following commit in mainline linux kernel:
commit
0bbacca7c3911451cea923b0ad6389d58e3d9ce9
Author: Sasha Levin <sasha.levin@oracle.com>
Date: Thu Feb 7 12:32:18 2013 +1100
hlist: drop the node parameter from iterators
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 18:45:10 +0000 (19:45 +0100)]
compat: backport idr_alloc() usage
This backports a patch series send by Tejun Heo:
https://lkml.org/lkml/2013/2/2/159
Hauke Mehrtens [Sun, 3 Feb 2013 17:25:07 +0000 (18:25 +0100)]
compat: netdev_set_default_ethtool_ops() is not in kernel 3.7.5
netdev_set_default_ethtool_ops() should be added to compat for every
3.7.X series kernel as it is also not in 3.7.5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 3 Feb 2013 16:20:56 +0000 (17:20 +0100)]
compat: backport BUILD_BUG_ON from recent kernel
This version of BUILD_BUG_ON does not have the following error on an
old kernel version (2.6.32 - 2.6.37):
drivers/net/wireless/iwlwifi/mvm/quota.c:145:24: error: bit-field
'<anonymous>' width not an integer constant
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 3 Feb 2013 14:08:46 +0000 (15:08 +0100)]
compat: adapt signature change of tty_flip_buffer_push() and tty_insert_flip_string()
The method signature of tty_flip_buffer_push() and
tty_insert_flip_string() was changed in these commits and this converts
it to the old behavior.
commit
2e124b4a390ca85325fae75764bef92f0547fa25
Author: Jiri Slaby <jslaby@suse.cz>
Date: Thu Jan 3 15:53:06 2013 +0100
TTY: switch tty_flip_buffer_push
commit
05c7cd39907184328f48d3e7899f9cdd653ad336
Author: Jiri Slaby <jslaby@suse.cz>
Date: Thu Jan 3 15:53:04 2013 +0100
TTY: switch tty_insert_flip_string
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 3 Feb 2013 13:01:39 +0000 (14:01 +0100)]
compat: add efi_enabled()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Johannes Berg [Thu, 24 Jan 2013 10:44:56 +0000 (11:44 +0100)]
compat: backport nla_put_be{16,32,64}()
I intend to use these in nl80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 24 Jan 2013 23:44:09 +0000 (00:44 +0100)]
compat: ckmake: do not start all build at the same time
When all builds are started at the same time this causes problems like,
because all threads want to access the same file.
In the compat-drivers build this resulted in this error for some threads:
./scripts/gen-compat-autoconf.sh: /usr/bin/env: bad interpreter: Text file busy
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 24 Jan 2013 21:15:21 +0000 (22:15 +0100)]
compat: ckmake: remove lots of warning spam for the log
Set the environment variable KCFLAGS = "-Wno-unused-but-set-variable"
to remove lots of spam from the log.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 24 Jan 2013 20:37:34 +0000 (21:37 +0100)]
compat: ckmake: make return code 2 is error
If make returns 2 it should be treat as an error and not as ok.
The documentation says 2 is returned if make encountered an error:
https://www.gnu.org/software/make/manual/html_node/Running.html
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 23 Jan 2013 23:41:41 +0000 (00:41 +0100)]
compat: update kernel versions in bin/get-compat-kernels
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 23 Jan 2013 22:54:45 +0000 (23:54 +0100)]
compat: do not access default_ethtool_ops
&default_ethtool_ops is not exported in kernel 3.7.4 and earlier and it
should be be accessed from compat.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Wed, 23 Jan 2013 21:22:44 +0000 (13:22 -0800)]
compat: fix compile errors when assembly is built into modules
On powerpc, modules can be compiled and linked with an assembly file, adding
missing symbols that the compiler references when using -Os.
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.50 [ OK ]
18 3.1.10 [ OK ]
19 3.2.33 [ OK ]
20 3.3.8 [ OK ]
21 3.4.17 [ OK ]
22 3.5.7 [ OK ]
23 3.6.5 [ OK ]
24 3.7.0 [ OK ]
real 0m33.803s
user 11m24.519s
sys 3m39.690s
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Luis R. Rodriguez [Tue, 22 Jan 2013 00:00:49 +0000 (16:00 -0800)]
compat: remove trailing erroneous semicolon from compat-3.8.c
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Mon, 21 Jan 2013 21:31:01 +0000 (13:31 -0800)]
compat: backport netdev_set_default_ethtool_ops()
Stanislaw found that due to commit
2c60db03 by Eric Dumazet
the wireless core was not assigning driver specific ethtool_ops.
This was fixed by Stanislaw's commit
d07d7507 which added
netdev_set_default_ethtool_ops(). Since Eric's commit
2c60db03
is on v3.7-rc1 Stanislaw's fix is required down to v3.7 as well.
The
d07d7507 commit is currently present on v3.8-rc4 and is on
its way to what we think may be v3.7.5. Because of this kernels
older than v3.7.5 will require the full implementation while
older kernels than v3.7.0 will require just assigning the ops
passed only if netdev has no ops already set just as we used
to have it implemented on cfg80211.
mcgrof@frijol ~/linux-stable (git::linux-3.8.y)$ git describe --contains 2c60db
v3.7-rc1~145^2~142
mcgrof@frijol ~/linux-stable (git::linux-3.8.y)$ git describe --contains d07d75
v3.8-rc4~29^2~4
ckmake results:
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.50 [ OK ]
18 3.1.10 [ OK ]
19 3.2.33 [ OK ]
20 3.3.8 [ OK ]
21 3.4.17 [ OK ]
22 3.5.7 [ OK ]
23 3.6.5 [ OK ]
24 3.7.0 [ OK ]
real 0m34.791s
user 11m38.572s
sys 3m56.927s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:23 +0000 (17:34 +0100)]
compat: fix warning in usb_autopm_get_interface_no_{resume,suspend}
This fixes the following warning on kernel version <= 2.6.31.
/compat/compat-2.6.33.c: In function ‘usb_autopm_get_interface_no_resume’:
/compat/compat-2.6.33.c:32:2: warning: passing argument 1 of ‘atomic_inc’ from incompatible pointer type [enabled by default]
/arch/x86/include/asm/atomic_64.h:85:20: note: expected ‘struct atomic_t *’ but argument is of type ‘int *’
/compat/compat-2.6.33.c: In function ‘usb_autopm_put_interface_no_suspend’:
/compat/compat-2.6.33.c:51:2: warning: passing argument 1 of ‘atomic_dec’ from incompatible pointer type [enabled by default]
/arch/x86/include/asm/atomic_64.h:98:20: note: expected ‘struct atomic_t *’ but argument is of type ‘int *’
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:22 +0000 (17:34 +0100)]
compat: add ETHTOOL_FWVERS_LEN
In older kernel version this was hard coded to 32
This was added in this commit:
commit
141518c95870228da4e050fbe31a8f0c9df82c72
Author: Matt Carlson <mcarlson@broadcom.com>
Date: Thu Dec 3 08:36:22 2009 +0000
tg3: Add some VPD preprocessor constants
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:21 +0000 (17:34 +0100)]
compat: add simple_write_to_buffer
This was copied from fs/libfs.c
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:20 +0000 (17:34 +0100)]
compat: add missing return value to netif_set_real_num_tx_queues
This fixes the following warning:
compat/compat-2.6.35.o
compat/compat-2.6.35.c: In function ‘netif_set_real_num_tx_queues’:
compat/compat-2.6.35.c:45:1: warning: control reaches end of non-void function [-Wreturn-type]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:19 +0000 (17:34 +0100)]
compat: fix warning of missing struct netdev_queue
Fix a warning on kernel version <= 2.6.26:
include/linux/compat-3.3.h:44:49: warning: ‘struct netdev_queue’ declared inside parameter list [enabled by default]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Thu, 27 Dec 2012 17:19:41 +0000 (18:19 +0100)]
compat: export platform_device_register_data()
platform_device_register_data has to be exported for kernel
version < 2.6.33. Some of these kernel have this method but do not
export it and only kernel version < 2.6.28 does not have this function.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Thu, 27 Dec 2012 17:19:40 +0000 (18:19 +0100)]
compat: fix compiler warning in nla_get_s64()
This fixes the following warning:
compat/include/linux/compat-3.7.h: In function ‘nla_get_s64’:
compat/include/linux/compat-3.7.h:191:2: warning: passing argument 2 of ‘nla_memcpy’ discards ‘const’ qualifier from pointer target type [enabled by default]
In file included from include/net/genetlink.h:5:0,
from compat/include/linux/compat-2.6.32.h:12,
from compat/include/linux/compat-2.6.29.h:13,
from compat/include/linux/compat-2.6.h:50,
from <command-line>:0:
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 20 Dec 2012 02:17:56 +0000 (18:17 -0800)]
compat: move HID_USB_DEVICE and HID_BLUETOOTH_DEVICE
These were actually introduced in 2.6.28.h and as such
we were getting a lot of redefinition warnings which
can cause delays in compilation. Lets clear this up ;)
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 20 Dec 2012 00:36:38 +0000 (16:36 -0800)]
compat: add ionice to ckmake again
This adds back the ionice settings on the make
call. The copying of content on the thread is not
yet reniced and although Python has utilities to
modify niceness and ionice there are privileged
requirements on the levels we want and I'm not too
sure yet how to resolve this in a reasonable way.
This for example fails:
p = psutil.Process(os.getpid())
delta = -20 - os.nice(0)
p.set_nice(delta)
p.set_ionice(psutil.IOPRIO_CLASS_RT)
This improves perfomance by about 1 minute.
real 17m53.079s
user 446m12.733s
sys 66m13.372s
Since ckmake is multithreaded now though it meant that
we had to copy the content of the code that we want to
compile for each kernel on a new directory. This work
is not reprioritized as it is nice so the best thing
I can think of is we renice the ckmake process our
ourselves and therefore children would properly inherit
the priority.
ionice -c 3 nice -n 20 ckmake
Can we do better without networking the solution ?
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 19 Dec 2012 04:06:39 +0000 (20:06 -0800)]
compat: rewrite ckmake in Python
This rewrites ckmake in Python. I suspected that we can still
improve compilation down by making ckmake multithreaded.
I was right, and in order to make this multithreaded I picked
python and ncurses to display results. This shaves down 6
minutes for compilation of compat-drivers on 24 kernels from
25 minutes down to 19 minutes. This can likely be improved
further.
Before:
real 25m28.705s
user 506m26.003s
sys 69m45.990s
After:
real 19m4.757s
user 486m26.236s
sys 70m5.579s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:59:59 +0000 (16:59 -0800)]
compat: add 3.2 and 3.3 kernels to rebuild headers
The 3.2 and 3.3 kernels also require rebuilding
kernel headers for glibc dependencies.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:54:01 +0000 (16:54 -0800)]
compat: fix get-compat-kernels for rebuilding kernel headers
We need to rebuild headers for kernels >= 3.4, and while at
it account for 4.0 and x.y kernels here x > 3.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:32:21 +0000 (16:32 -0800)]
compat: add support for forcing get-compat-kernels
Useful for cronjobs.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:26:14 +0000 (16:26 -0800)]
compat: add v3.7 to get-compat-kernels
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:22:35 +0000 (16:22 -0800)]
compat: adjust get-compat-kernels for root users
Prefix the download / target directory with compat-ksrc/
if root is used.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:20:34 +0000 (16:20 -0800)]
compat: adjust get-compat-kernels for root usage
If the user id is root then don't assume we want it
under / but instead use the current directory.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 19:45:05 +0000 (11:45 -0800)]
compat: backport platform_device_register_data()
Add the helper.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
d8bf254
v2.6.28-rc1~284^2~9
commit
d8bf254089a6c31d7d01a4d1d2f1861662900855
Author: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Mon Sep 22 14:41:40 2008 -0700
platform: add new device registration helper
Add a helper that registers simple platform_device w/o resources but with
parent and device data.
This is usefull to cleanup platform code from code that registers such
simple devices as leds-gpio, generic-bl, etc.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 1m58.798s
user 3m59.967s
sys 1m25.585s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 13 Dec 2012 04:38:14 +0000 (20:38 -0800)]
compat: fix compilation on hid_ignore()
This fixes compilation on the addition of hid_ignore()
for kernels older than 2.6.28.
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 1m58.798s
user 3m59.967s
sys 1m25.585s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 13 Dec 2012 04:18:00 +0000 (20:18 -0800)]
compat: backport struct hid_device_id
Kernels older than 2.6.28 did not have this
defined. Add it.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
e8c84f9a
v2.6.28-rc1~571^2~54
commit
e8c84f9a5f06912c94c38961096c994da3890a2e
Author: Jiri Slaby <jirislaby@gmail.com>
Date: Mon May 19 15:50:01 2008 +0200
modpost: add support for hid
Generate aliases for hid device modules to support autoloading.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 19:54:49 +0000 (11:54 -0800)]
compat: backport HID_USB_DEVICE() and HID_BLUETOOTH_DEVICE()
commit
070748ed0b52399858a5967026a452bbb903a64c
Author: Henrik Rydberg <rydberg@euromail.se>
Date: Mon Apr 23 12:07:05 2012 +0200
HID: Create a generic device group
Devices that do not have a special driver are handled by the generic
driver. This patch does the same thing using device groups; Instead of
forcing a particular driver, the appropriate driver is picked up by
udev. As a consequence, one can now move a device from generic to
specific handling by a simple rebind. By adding a new device id to the
generic driver, the same thing can be done in reverse.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 17:47:09 +0000 (09:47 -0800)]
compat: add HID_QUIRK_IGNORE
Just add the define.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
6f4303fb
v2.6.30-rc1~219^2~9
commit
6f4303fb2ec68055e793b84887a7ae0f9ea7cc2d
Author: Jiri Kosina <jkosina@suse.cz>
Date: Thu Jan 29 00:15:51 2009 +0100
HID: bring back possibility to specify vid/pid ignore on module load
When hid quirks were converted to specialized driver, the HID_QUIRK_IGNORE
has been moved completely, as the hid_ignore_list[] has been moved into the
generic code.
However userspace already got used to the possibility that modprobing
usbhid with
'quirks=vid:pid:0x4'
makes the device ignored by usbhid driver. So keep this quirk flag in place
for backwards compatibility.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 15:49:18 +0000 (07:49 -0800)]
compat: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE
We just need the definitions.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
b5e5a37e
v2.6.35-rc1~454^2~5^2~14
commit
b5e5a37e36cd4d355b875665312d7aaae4e5833c
Author: Bastien Nocera <hadess@hadess.net>
Date: Fri Apr 16 17:19:50 2010 +0100
HID: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE
Add two quirks to make it possible for usbhid module options to
override whether a device is ignored (HID_QUIRK_NO_IGNORE) and
whether to connect a hiddev device (HID_QUIRK_HIDDEV_FORCE).
Passing HID_QUIRK_NO_IGNORE for your device means that it will
not be ignored by the HID layer, even if present in a blacklist.
HID_QUIRK_HIDDEV_FORCE will force the creation of a hiddev for that
device, making it accessible from user-space.
Tested with an Apple IR Receiver, switching it from using appleir
to using lirc's macmini driver.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:47:44 +0000 (18:47 -0800)]
compat: backport definition of HID_TYPE_USBNONE
This is declared within the enum:
enum hid_type {
HID_TYPE_OTHER = 0,
HID_TYPE_USBMOUSE,
HID_TYPE_USBNONE
};
But we just declare it as a define for 2.
This backports was added with the below commit:
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
6dc1418e
v3.1-rc1~309^2^2~14
commit
6dc1418e13144162e8bc4858789010d8f0e1e65c
Author: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Date: Mon May 23 15:45:44 2011 -0700
HID: yurex: recognize GeneralKeys wireless presenter as generic HID
Unfortunately, the device seems to have the same Vendor ID and Product ID
as YUREX leg-shakes sensors, and the commit
6bc235a2e2 ("USB: add driver
for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list.
I believe that we can distinguish YUREX and the Wireless Presenter by
device type. The patch below makes the driver ignore only YUREX
(bInterfaceProtocol==0), and recognize Wireless Presenter
(bInterfaceProtocol is keyboard or mouse) as generic HID. (I don't have
the Wireless Presenter, so not yet ested.)
** YUREX lsusb information:
Bus 002 Device 007: ID 0c45:1010 Microdia
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0c45 Microdia
idProduct 0x1010
bcdDevice 0.03
iManufacturer 1 JESS
iProduct 2 YUREX
iSerial 3
10000269
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 31
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Reported-by: Thomas B?chler <thomas@archlinux.org>
Tested-by: Thomas B?chler <thomas@archlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:26:45 +0000 (18:26 -0800)]
compat: backport PCI_EXP_LNKCTL_ASPM_L0S and PCI_EXP_LNKCTL_ASPM_L1
This backports the addition of two defines added by the
commit below.
commit
7508320678b7819ac6aeb89580b8622a424ce586
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed Dec 5 13:51:19 2012 -0700
PCI: Add standard PCIe Capability Link ASPM field names
Add standard #defines for ASPM fields in PCI Express Link Capability and
Link Control registers.
Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but
these are defined for the Linux ASPM interfaces, e.g.,
pci_disable_link_state(), and only coincidentally match the actual register
bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match
the register bit.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:09:10 +0000 (18:09 -0800)]
compat: backport hid_ignore()
We backport hid_ignore() as of next-
20121211, that is now
used by other drivers.
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 2m9.630s
user 8m55.525s
sys 2m2.460s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:05:49 +0000 (18:05 -0800)]
compat: generate CONFIG_COMPAT_KERNEL_3_8
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Fri, 7 Dec 2012 01:05:16 +0000 (17:05 -0800)]
compat: backport unsigned netlink attribute accessors
These were added upstream in commit
4778e0be16c291ba6d9d55eeff3a6764fc84a071.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 5 Dec 2012 00:32:46 +0000 (16:32 -0800)]
compat: backport napi_gro_receive()
Just call netif_receive_skb() for kernels older than
v2.6.29. If Enterprise Linux distributions decided to
backport GRO support onto a kernel older than 2.6.29,
they'll likely want #ifdef this out accordingly.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
d565b0a1
v2.6.29-rc1~581^2~181
commit
d565b0a1a9b6ee7dff46e1f68b26b526ac11ae50
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon Dec 15 23:38:52 2008 -0800
net: Add Generic Receive Offload infrastructure
This patch adds the top-level GRO (Generic Receive Offload) infrastructure.
This is pretty similar to LRO except that this is protocol-independent.
Instead of holding packets in an lro_mgr structure, they're now held in
napi_struct.
For drivers that intend to use this, they can set the NETIF_F_GRO bit and
call napi_gro_receive instead of netif_receive_skb or just call netif_rx.
The latter will call napi_receive_skb automatically. When napi_gro_receive
is used, the driver must either call napi_complete/napi_rx_complete, or
call napi_gro_flush in softirq context if the driver uses the primitives
__napi_complete/__napi_rx_complete.
Protocols will set the gro_receive and gro_complete function pointers in
order to participate in this scheme.
In addition to the packet, gro_receive will get a list of currently held
packets. Each packet in the list has a same_flow field which is non-zero
if it is a potential match for the new packet. For each packet that may
match, they also have a flush field which is non-zero if the held packet
must not be merged with the new packet.
Once gro_receive has determined that the new skb matches a held packet,
the held packet may be processed immediately if the new skb cannot be
merged with it. In this case gro_receive should return the pointer to
the existing skb in gro_list. Otherwise the new skb should be merged into
the existing packet and NULL should be returned, unless the new skb makes
it impossible for any further merges to be made (e.g., FIN packet) where
the merged skb should be returned.
Whenever the skb is merged into an existing entry, the gro_receive
function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb
merely matches an existing entry but can't be merged with it, then
this shouldn't be set.
If gro_receive finds it pointless to hold the new skb for future merging,
it should set NAPI_GRO_CB(skb)->flush.
Held packets will be flushed by napi_gro_flush which is called by
napi_complete and napi_rx_complete.
Currently held packets are stored in a singly liked list just like LRO.
The list is limited to a maximum of 8 entries. In future, this may be
expanded to use a hash table to allow more flows to be held for merging.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Tue, 4 Dec 2012 21:46:45 +0000 (21:46 +0000)]
compat: backplane mode negotiation ethtool definitions
This backports the ethtool definitions implemented on
commit
894b19a6.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
894b19a6
v2.6.31-rc1~14^2~577
commit
894b19a6b343ce3589237167a56e6df0fe72ef0d
Author: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed Apr 29 08:25:57 2009 +0000
ethtool/mdio: Support backplane mode negotiation
Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Tue, 4 Dec 2012 21:12:46 +0000 (21:12 +0000)]
compat: rename MDIO exported symbols
compat-drivers now has support for carrying over the
MDIO module. To help it avoid clashes with already in
place drivers that rely on the older MDIO module we
rename the exported symbols of the shinier module with
a compat_ prefix.
An alternative to this strategy is to have compat-drivers
work under a separate namespace but we have yet to receive
patches for that, although we hear someone did it.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Tue, 4 Dec 2012 01:36:15 +0000 (17:36 -0800)]
compat: backport netif_set_real_num_rx_queues()
netif_set_real_num_rx_queues() was added on v2.6.37 but
requires CONFIG_RPS support which was added on v2.6.35.
A few updates were done on the net core though to support
changing the number of RX queues if the device was already
registered. We can't support this on older kernels though
so the best we can do is for kernels >= 2.6.35 simply try
to update the num_rx_queues and if the device is registered
fail.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
62fe0b40
v2.6.37-rc1~147^2~340
commit
62fe0b40abb3484413800edaef9b087a20059acf
Author: Ben Hutchings <bhutchings@solarflare.com>
Date: Mon Sep 27 08:24:33 2010 +0000
net: Allow changing number of RX queues after device allocation
For RPS, we create a kobject for each RX queue based on the number of
queues passed to alloc_netdev_mq(). However, drivers generally do not
determine the numbers of hardware queues to use until much later, so
this usually represents the maximum number the driver may use and not
the actual number in use.
For TX queues, drivers can update the actual number using
netif_set_real_num_tx_queues(). Add a corresponding function for RX
queues, netif_set_real_num_rx_queues().
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 2m5.270s
user 8m51.501s
sys 2m1.576s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Mon, 3 Dec 2012 23:40:21 +0000 (15:40 -0800)]
compat: backport netif_set_real_num_tx_queues()
This was added as of v2.6.35. We implement a slightly
modified version given that this was later changed
to return int through commit
e6484930. The changes
on
e6484930 however were added due to some internal
changes on core networking, we'll leave in place
a simpler implementation for older kernels.
Note that for older kernels than 2.6.27 we use
the netdev egress_subqueue_count to set the TX
queue count. Commit
fd2ea0a7 added real_num_tx_queues
to the netdevice when Multiqueue was added.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
f0796d5c73e59786d09a1e617689d1d415f2db44
v2.6.35-rc5~14^2~14
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
3171d026
v2.6.37-rc1~147^2~339
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
fd2ea0a7
v2.6.27-rc1~964^2~78
commit
f0796d5c73e59786d09a1e617689d1d415f2db44
Author: John Fastabend <john.r.fastabend@intel.com>
Date: Thu Jul 1 13:21:57 2010 +0000
net: decreasing real_num_tx_queues needs to flush qdisc
Reducing real_num_queues needs to flush the qdisc otherwise
skbs with queue_mappings greater then real_num_tx_queues can
be sent to the underlying driver.
The flow for this is,
dev_queue_xmit()
dev_pick_tx()
skb_tx_hash() => hash using real_num_tx_queues
skb_set_queue_mapping()
...
qdisc_enqueue_root() => enqueue skb on txq from hash
...
dev->real_num_tx_queues -= n
...
sch_direct_xmit()
dev_hard_start_xmit()
ndo_start_xmit(skb,dev) => skb queue set with old hash
skbs are enqueued on the qdisc with skb->queue_mapping set
0 < queue_mappings < real_num_tx_queues. When the driver
decreases real_num_tx_queues skb's may be dequeued from the
qdisc with a queue_mapping greater then real_num_tx_queues.
This fixes a case in ixgbe where this was occurring with DCB
and FCoE. Because the driver is using queue_mapping to map
skbs to tx descriptor rings we can potentially map skbs to
rings that no longer exist.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit
e6484930d7c73d324bccda7d43d131088da697b9
Author: Tom Herbert <therbert@google.com>
Date: Mon Oct 18 18:04:39 2010 +0000
net: allocate tx queues in register_netdevice
This patch introduces netif_alloc_netdev_queues which is called from
register_device instead of alloc_netdev_mq. This makes TX queue
allocation symmetric with RX allocation. Also, queue locks allocation
is done in netdev_init_one_queue. Change set_real_num_tx_queues to
fail if requested number < 1 or greater than number of allocated
queues.
Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit
fd2ea0a79faad824258af5dcec1927aa24d81c16
Author: David S. Miller <davem@davemloft.net>
Date: Thu Jul 17 01:56:23 2008 -0700
net: Use queue aware tests throughout.
This effectively "flips the switch" by making the core networking
and multiqueue-aware drivers use the new TX multiqueue structures.
Non-multiqueue drivers need no changes. The interfaces they use such
as netif_stop_queue() degenerate into an operation on TX queue zero.
So everything "just works" for them.
Code that really wants to do "X" to all TX queues now invokes a
routine that does so, such as netif_tx_wake_all_queues(),
netif_tx_stop_all_queues(), etc.
pktgen and netpoll required a little bit more surgery than the others.
In particular the pktgen changes, whilst functional, could be largely
improved. The initial check in pktgen_xmit() will sometimes check the
wrong queue, which is mostly harmless. The thing to do is probably to
invoke fill_packet() earlier.
The bulk of the netpoll changes is to make the code operate solely on
the TX queue indicated by by the SKB queue mapping.
Setting of the SKB queue mapping is entirely confined inside of
net/core/dev.c:dev_pick_tx(). If we end up needing any kind of
special semantics (drops, for example) it will be implemented here.
Finally, we now have a "real_num_tx_queues" which is where the driver
indicates how many TX queues are actually active.
With IGB changes from Jeff Kirsher.
Signed-off-by: David S. Miller <davem@davemloft.net>
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 1m51.110s
user 4m58.571s
sys 1m39.282s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Mon, 3 Dec 2012 21:23:12 +0000 (13:23 -0800)]
compat: backport PTR_RET()
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
fa9ee9c4
v2.6.39-rc1~267
commit
fa9ee9c4b9885dfdf8eccac19b8b4fc8a7c53288
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Tue Mar 22 16:34:05 2011 -0700
include/linux/err.h: add a function to cast error-pointers to a return value
PTR_RET() can be used if you have an error-pointer and are only interested
in the eventual error value, but not the pointer. Yields the usual 0 for
no error, -ESOMETHING otherwise.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Mon, 3 Dec 2012 19:50:49 +0000 (11:50 -0800)]
compat: backport definition of PCI_MSIX_ENTRY_CTRL_MASKBIT
This backports the addition of PCI_MSIX_ENTRY_CTRL_MASKBIT.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
8d805286968811223cca002134ba3d81244d5313
v2.6.38-rc1~55^2~14
commit
8d805286968811223cca002134ba3d81244d5313
Author: Sheng Yang <sheng@linux.intel.com>
Date: Thu Nov 11 15:46:55 2010 +0800
PCI: Add mask bit definition for MSI-X table
Then we can use it instead of magic number 1.
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Mon, 3 Dec 2012 19:38:20 +0000 (11:38 -0800)]
compat: backport alloc_etherdev_mqs()
This backports support for alloc_netdev_mqs(). The routine adds
support for specifying different TX queues and RX queues. In older
kernels we were only able to request the equal amount of queues for
both TX and RX. To backport this simply ignore the RX queue count.
The commit that added alloc_netdev_mq() with equal amount of TX
and RX queues was added via
f25f4e44 onto kernel v2.6.23.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
36909ea4
v2.6.38-rc1~50^2~46
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
f25f4e44
v2.6.23-rc1~1109^2~115
commit
36909ea43814cba34f7c921e99cba33d770a54e1
Author: Tom Herbert <therbert@google.com>
Date: Sun Jan 9 19:36:31 2011 +0000
net: Add alloc_netdev_mqs function
Added alloc_netdev_mqs function which allows the number of transmit and
receive queues to be specified independenty. alloc_netdev_mq was
changed to a macro to call the new function. Also added
alloc_etherdev_mqs with same purpose.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit
f25f4e44808f0f6c9875d94ef1c41ef86c288eb2
Author: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Date: Fri Jul 6 13:36:20 2007 -0700
[CORE] Stack changes to add multiqueue hardware support API
Add the multiqueue hardware device support API to the core network
stack. Allow drivers to allocate multiple queues and manage them at
the netdev level if they choose to do so.
Added a new field to sk_buff, namely queue_mapping, for drivers to
know which tx_ring to select based on OS classification of the flow.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 1 Dec 2012 19:22:09 +0000 (11:22 -0800)]
compat: backport PCI MSI-X entry definitions
The PCI MSI-X entries were moved to uapi headers on v2.6.38
to allow drivers to use it. Older kernels will need this.
mcgrof@frijol ~/linux-stable (git::linux-3.2.y)$ git describe --contains
00aaaef9
v2.6.38-rc1~55^2~15
commit
00aaaef9a51a1a25c5d6d52ce510772f149a0eb0
Author: Sheng Yang <sheng@linux.intel.com>
Date: Thu Nov 11 15:46:54 2010 +0800
PCI: MSI: Move MSI-X entry definition to pci_regs.h
Then it can be used by others.
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 1 Dec 2012 18:50:33 +0000 (10:50 -0800)]
compat: fix addition of NETIF_F_RXCSUM
This needs to be defined to something and although
ckmake passed, no code was using it so we were unable
to test it at compile time really.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 1 Dec 2012 18:33:41 +0000 (10:33 -0800)]
compat: define NETIF_F_RXCSUM
We can't really backport this so just define it.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
e83d360d
v2.6.39-rc1~468^2~336
commit
e83d360d9a7e5d71d55c13e96b19109a2ea23bf0
Author: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Tue Feb 15 16:59:18 2011 +0000
net: introduce NETIF_F_RXCSUM
Introduce NETIF_F_RXCSUM to replace device-private flags for RX checksum
offload. Integrate it with ndo_fix_features.
ethtool_op_get_rx_csum() is removed altogether as nothing in-tree uses it.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 1m59.783s
user 8m11.111s
sys 1m56.675s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
projects / openwrt / staging / blogic.git / log