Nicolas Thill [Sun, 11 Jan 2015 22:15:11 +0000 (22:15 +0000)]
dosfstools: update to 3.0.26
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43942
Nicolas Thill [Sun, 11 Jan 2015 22:15:03 +0000 (22:15 +0000)]
fuse: update to 2.9.3
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43941
Nicolas Thill [Sun, 11 Jan 2015 22:03:06 +0000 (22:03 +0000)]
target/uml: add missing config symbols
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43940
Felix Fietkau [Sun, 11 Jan 2015 18:25:23 +0000 (18:25 +0000)]
musl: merge changes from git, includes further getopt fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43939
Luka Perkov [Sun, 11 Jan 2015 17:20:16 +0000 (17:20 +0000)]
mvsw61xx: track and set per-VLAN port state in STU
Since the driver doesn't know anything about (M)STP
we just hard-set the ports to be enabled if they are
part of the VLAN.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43938
Luka Perkov [Sun, 11 Jan 2015 17:20:06 +0000 (17:20 +0000)]
mvsw61xx: clean up and expand register definitions
- eliminate MV_CPUPORT; not necessary since we define
the CPU port(s) via Device Tree
- add STU and expand VTU operations
- update register names to match those of 88E61xx rather than
mvswitch's
88E6060
- use more consistent formatting
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43937
Luka Perkov [Sun, 11 Jan 2015 17:20:03 +0000 (17:20 +0000)]
mvsw61xx: rework chip recognition
Recognizes
88E6171/6172/6176 at the moment.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43936
Luka Perkov [Sun, 11 Jan 2015 17:19:58 +0000 (17:19 +0000)]
mvsw6171: rename to 'mvsw61xx'
In preparation for properly supporting switches
beyond the
88E6171.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43935
Jo-Philipp Wich [Sun, 11 Jan 2015 16:53:59 +0000 (16:53 +0000)]
ltq-vmmc: fix broken autoconf invocation
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43934
Jo-Philipp Wich [Sun, 11 Jan 2015 16:53:52 +0000 (16:53 +0000)]
ltq-tapi: fix broken autoconf invocation
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43933
Jo-Philipp Wich [Sun, 11 Jan 2015 16:53:45 +0000 (16:53 +0000)]
ltq-ifxos: fix broken autoconf invocation
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43932
Jo-Philipp Wich [Sun, 11 Jan 2015 16:53:34 +0000 (16:53 +0000)]
ltq-adsl: fix broken autoconf invocation
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43931
Felix Fietkau [Sun, 11 Jan 2015 16:14:23 +0000 (16:14 +0000)]
libusb: update to version 1.0.19
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43930
Luka Perkov [Sun, 11 Jan 2015 01:28:32 +0000 (01:28 +0000)]
kernel: update 3.14 to 3.14.28
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43929
Florian Fainelli [Sat, 10 Jan 2015 20:12:15 +0000 (20:12 +0000)]
mcs814x: switch to 3.14 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43927
Florian Fainelli [Sat, 10 Jan 2015 20:12:02 +0000 (20:12 +0000)]
mcs814x: add 3.14 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43926
Florian Fainelli [Sat, 10 Jan 2015 20:11:18 +0000 (20:11 +0000)]
mcs814x: account for dtb output directory differences
3.3 produced *.dtb files in arch/arm/boot/ while 3.14 will produce those
in arch/arm/boot/dts/, adjust the image makefile accordingly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43925
Florian Fainelli [Sat, 10 Jan 2015 20:11:07 +0000 (20:11 +0000)]
mcs814x: set low_mem feature flag
Most of the devices we support have between 16MiB and 32MiB of RAM
available.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43924
Florian Fainelli [Sat, 10 Jan 2015 20:10:57 +0000 (20:10 +0000)]
mcs814x: rename config-default to config-3.3
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43923
Zoltan Herpai [Sat, 10 Jan 2015 19:56:30 +0000 (19:56 +0000)]
sunxi: change bananapro DTS to use the already published patch, clean up 3.18 config of generic symbols
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43922
Zoltan Herpai [Sat, 10 Jan 2015 19:12:35 +0000 (19:12 +0000)]
uboot-sunxi: fix bananapro target, update patch
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43921
Felix Fietkau [Sat, 10 Jan 2015 18:48:14 +0000 (18:48 +0000)]
ar71xx: fix console string in images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43917
Jo-Philipp Wich [Sat, 10 Jan 2015 18:19:59 +0000 (18:19 +0000)]
imagebuilder: fail with error if the passed profile name does not exist
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43916
Florian Fainelli [Sat, 10 Jan 2015 18:10:04 +0000 (18:10 +0000)]
adm5120: add experimental 3.14 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43915
Florian Fainelli [Sat, 10 Jan 2015 18:08:53 +0000 (18:08 +0000)]
adm5120: move files to files-3.8
In preparation for adding new kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43914
Florian Fainelli [Sat, 10 Jan 2015 18:08:16 +0000 (18:08 +0000)]
tools: edimax_fw_header: fix suspicious memset usage
memset() was called with a size argument against a pointer size, not the
structure size itself.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43913
Zoltan Herpai [Sat, 10 Jan 2015 17:23:55 +0000 (17:23 +0000)]
kernel: add missing config symbols for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43912
Felix Fietkau [Sat, 10 Jan 2015 16:14:25 +0000 (16:14 +0000)]
build: do not assume that gcc-{ar,ranlib,nm} is usable with an external toolchain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43911
Felix Fietkau [Sat, 10 Jan 2015 15:27:07 +0000 (15:27 +0000)]
ar71xx: port wndr3700/3800 to the new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43910
Felix Fietkau [Sat, 10 Jan 2015 15:27:00 +0000 (15:27 +0000)]
ar71xx: port carambola2 to the new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43909
Felix Fietkau [Sat, 10 Jan 2015 15:26:53 +0000 (15:26 +0000)]
ramips: convert mt7621 images to new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43908
Felix Fietkau [Sat, 10 Jan 2015 15:26:47 +0000 (15:26 +0000)]
build: add new image building code infrastructure
This simplifies building device / profile specific images, and allows
the build system to parallelize generating images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43907
Felix Fietkau [Sat, 10 Jan 2015 15:26:38 +0000 (15:26 +0000)]
ramips: simplify mkimage kernel loadaddr/entry handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43906
Jo-Philipp Wich [Sat, 10 Jan 2015 11:17:11 +0000 (11:17 +0000)]
version.mk: explicitely filter "generic" subtarget for "%s" placeholder (#18710)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43905
Jo-Philipp Wich [Sat, 10 Jan 2015 11:17:02 +0000 (11:17 +0000)]
sdk: track files with git and use it to implement proper clean targets
Initialize a Git repository in the SDK and use git reset / git clean
to rollback any SDK changes with "make clean" or "make dirclean".
This approach is more robust than nuking entire directory trees because
some parts of them might have been shipped with the original archive.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43904
Felix Fietkau [Fri, 9 Jan 2015 19:52:27 +0000 (19:52 +0000)]
popt: update to latest upstream version, fixes build breakage after autofools changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43901
Zoltan Herpai [Fri, 9 Jan 2015 19:35:14 +0000 (19:35 +0000)]
sunxi: bump kernel to 3.18 - refresh patches - add bananapro, cubietruck, mele_m9 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43900
Zoltan Herpai [Fri, 9 Jan 2015 19:19:35 +0000 (19:19 +0000)]
uboot-sunxi: various updates - use mainline uboot-sunxi version (2015.01-rc3) - add support for Bananapro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43899
Felix Fietkau [Fri, 9 Jan 2015 15:40:51 +0000 (15:40 +0000)]
ramips: add preliminary Archer C20i support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43898
Felix Fietkau [Fri, 9 Jan 2015 15:40:39 +0000 (15:40 +0000)]
tools/firmware-utils: add version 3 header support for mktplinkfw2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43897
Jo-Philipp Wich [Fri, 9 Jan 2015 14:51:29 +0000 (14:51 +0000)]
gettext-full: update to v0.19.4
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43896
Jo-Philipp Wich [Fri, 9 Jan 2015 14:51:23 +0000 (14:51 +0000)]
tools: automake: update to v1.15
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43895
Jo-Philipp Wich [Fri, 9 Jan 2015 12:49:55 +0000 (12:49 +0000)]
thc-ipv6: update to v2.7
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43894
Imre Kaloz [Fri, 9 Jan 2015 12:36:07 +0000 (12:36 +0000)]
switch to 3.18
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43893
Imre Kaloz [Fri, 9 Jan 2015 12:35:19 +0000 (12:35 +0000)]
upgrade to 3.18.2
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43892
Jo-Philipp Wich [Fri, 9 Jan 2015 12:35:09 +0000 (12:35 +0000)]
lldpd: update to v0.7.13
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43891
Steven Barth [Fri, 9 Jan 2015 08:39:16 +0000 (08:39 +0000)]
procd: fix console bringup on UML (again...)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43890
John Crispin [Thu, 8 Jan 2015 21:23:18 +0000 (21:23 +0000)]
kernel: add SECCOMP to menuconfig
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43888
John Crispin [Thu, 8 Jan 2015 20:26:52 +0000 (20:26 +0000)]
base-files: Fix switch settings for uci-defaults-new.sh.
The enable and reset settings need to be added even when they're false. This is true at least for 'enable', that seems to default to true otherwise.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43887
John Crispin [Thu, 8 Jan 2015 20:26:41 +0000 (20:26 +0000)]
openvpn: procd_set_param respawn
Makes sure that the openvpn instance gets restarted in case of a crash.
Intentional stops using /etc/init.d/openvpn stop will not result in
respawning. Anything else will, e.g. killall openvpn.
Signed-off-by: Lars Gierth <larsg@systemli.org>
SVN-Revision: 43886
John Crispin [Thu, 8 Jan 2015 20:26:34 +0000 (20:26 +0000)]
gemini: add ata driver
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43885
John Crispin [Thu, 8 Jan 2015 20:26:27 +0000 (20:26 +0000)]
gemini: add rtc-gemini driver
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43884
John Crispin [Thu, 8 Jan 2015 20:26:20 +0000 (20:26 +0000)]
ramips: Fix HooToo HT-TM02 support.
- Fix LED definitions.
- Add mode-switch slider definition (at GPIO 14).
- Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.)
- Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1.
- Fix board name, as the company name is HooToo and not HOOTOO.
- Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.)
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43883
John Crispin [Thu, 8 Jan 2015 20:26:13 +0000 (20:26 +0000)]
ramips: Fix for gpio falling interrupt mask
This patch fixes a wrong mask operation for the rt2880-compatible ralink devices.
The mask operation reads the actual flags and then logical combines it with the pin flag it want to set.
Unfortunally, for rising as for falling interrupt flags the actual flag status of the rising interrupts was used.
That caused a problem if you want to use more than one falling GPIO interrupt.
Now the correct (seperated) actual status is used for both, falling and rising.
Signed-off-by: Jonas Arndt <info@greenwire-elektronik.de>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43882
John Crispin [Thu, 8 Jan 2015 20:26:02 +0000 (20:26 +0000)]
ramips: update BR-6475ND dts
Update firmware location for 2.4GHz radio on the Edimax BR-6475nD.
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 43881
John Crispin [Thu, 8 Jan 2015 20:25:55 +0000 (20:25 +0000)]
ramips: base-files: Whitespace fixes.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43880
John Crispin [Thu, 8 Jan 2015 20:25:48 +0000 (20:25 +0000)]
lantiq: BT Home Hub 3A - userspace
BT Home Hub 3A - userspace
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43879
John Crispin [Thu, 8 Jan 2015 20:25:41 +0000 (20:25 +0000)]
lantiq: BT Home Hub 3A - profile
BT Home Hub 3A - profile
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43878
John Crispin [Thu, 8 Jan 2015 20:25:35 +0000 (20:25 +0000)]
lantiq: BT Home Hub3A - device tree
BT Home Hub3A - device tree
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43877
John Crispin [Thu, 8 Jan 2015 20:25:28 +0000 (20:25 +0000)]
lantiq: Fix adsl led on Home Hub 2B
This fixes the adsl led on the Home Hub 2B.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43876
Steven Barth [Thu, 8 Jan 2015 18:29:26 +0000 (18:29 +0000)]
openssl: bump to 1.0.1j
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43875
Jo-Philipp Wich [Thu, 8 Jan 2015 16:10:46 +0000 (16:10 +0000)]
firewall: respect src_dip option for reflection (#18544)
Also fix wrong IPv4 netmask calculation on x86-64, thanks Ulrich Weber.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43874
Felix Fietkau [Thu, 8 Jan 2015 14:33:53 +0000 (14:33 +0000)]
scripts/config: sync with linux upstream
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43873
Jo-Philipp Wich [Thu, 8 Jan 2015 12:46:44 +0000 (12:46 +0000)]
base-files: update default url template and complete kconfig help
Change the kconfig default for the repository url template to use "%s"
instead of "%T" as well.
Also complete the kconfig help text do cover the recently introduced
manufacturer, product and hwrev options.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43872
Jo-Philipp Wich [Thu, 8 Jan 2015 12:46:37 +0000 (12:46 +0000)]
version.mk: add "%s" placeholder for dotted target.subtarget notation
Implement "%s" placeholder that expands to either the target name,
e.g. "ar71xx" if the subtarget is generic or to target.subtarget, e.g.
"ar71xx.nand" is a subtarget is choosen.
Also change the default repository url template to use "%s" instead
of "%T" to reflect the directory structure used by the buildbot systems.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43871
Steven Barth [Thu, 8 Jan 2015 11:31:36 +0000 (11:31 +0000)]
nftables: bump to latest git / all patches upstreamed
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43870
Jo-Philipp Wich [Thu, 8 Jan 2015 11:02:00 +0000 (11:02 +0000)]
build: add version number to filenames
This commit introduces a new option CONFIG_VERSION_FILENAMES which causes
OpenWrt to embed the version number in generated image files, SDK- and
ImageBuilder archives.
The option is enabled by default if CONFIG_VERSIONOPT is set.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43869
Rafał Miłecki [Wed, 7 Jan 2015 17:10:02 +0000 (17:10 +0000)]
fstools: update to the latest git HEAD
This allows using UBIFS volume as overlay and adds support for Btrfs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43868
Felix Fietkau [Wed, 7 Jan 2015 16:02:59 +0000 (16:02 +0000)]
package/binutils: actually support the target toolchain
This fixes a bug, where ld on ARM EABI platforms expects OABI code.
Signed-off-by: Harald Geyer <harald@ccbib.org>
SVN-Revision: 43866
Jo-Philipp Wich [Tue, 6 Jan 2015 12:42:38 +0000 (12:42 +0000)]
qos-scripts: bump PKG_REVISION and copyright year
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43860
Jo-Philipp Wich [Tue, 6 Jan 2015 12:41:22 +0000 (12:41 +0000)]
openvpn: bump PKG_REVISION and copyright year
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43859
Steven Barth [Tue, 6 Jan 2015 09:59:55 +0000 (09:59 +0000)]
openssl: fix CVE-2014-3569
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43858
Felix Fietkau [Mon, 5 Jan 2015 21:37:29 +0000 (21:37 +0000)]
kernel: add missing dependency for kmod-crypto-ghash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43857
Felix Fietkau [Mon, 5 Jan 2015 21:37:21 +0000 (21:37 +0000)]
lantiq: add missing NAND_WRITE_DATA in NAND driver.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43856
Imre Kaloz [Mon, 5 Jan 2015 15:08:20 +0000 (15:08 +0000)]
refresh kernel config, add cpuidle and cpufreq support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43855
Imre Kaloz [Mon, 5 Jan 2015 15:02:18 +0000 (15:02 +0000)]
enable swconfig and the mvsw6171 driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43854
Felix Fietkau [Mon, 5 Jan 2015 13:19:20 +0000 (13:19 +0000)]
mac80211: fix ad-hoc basic/multicast rate regression from r43782
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43853
Felix Fietkau [Mon, 5 Jan 2015 13:03:55 +0000 (13:03 +0000)]
nettle: add CONFIG_LIBNETTLE_MINI to PKG_CONFIG_DEPENDS to fix rebuild issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43852
Felix Fietkau [Mon, 5 Jan 2015 13:03:48 +0000 (13:03 +0000)]
dnsmasq: fix dependency problems of the dnsmasq-full variant.
This patch tries to
- Let the DHCPv6 feature depend on CONFIG_IPV6.
- Conditionally select libnettle, kmod-ipv6, kmod-ipt-ipset only if the
corresponding features are enabled.
- Install `trust-anchors.conf` only if DNSSEC is selected.
- Add PKG_CONFIG_DEPENDS for the configurable options.
- Add a patch to let the Makefile of dnsmasq be aware of changes in
COPTS variable.
Big thanks goes to Frank Schäfer <fschaefer.oss@googlemail.com> for
providing necessary information on connections and dependency relations
between these CONFIGs and packages.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 43851
Felix Fietkau [Mon, 5 Jan 2015 13:03:40 +0000 (13:03 +0000)]
package: remove references to symbols TARGET_{ps3,pxcab}.
Target pxcab and ps3 were removed from maintaince in r34764 and r34765
respectively.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 43850
Felix Fietkau [Mon, 5 Jan 2015 13:03:33 +0000 (13:03 +0000)]
e2fsprogs: bump release
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 43849
Felix Fietkau [Mon, 5 Jan 2015 13:03:26 +0000 (13:03 +0000)]
e2fsprogs: package dumpe2fs, e2freefrag, filefrag, debugfs
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 43848
Felix Fietkau [Mon, 5 Jan 2015 13:03:20 +0000 (13:03 +0000)]
e2fsprogs: symlink e2fsck to fsck.ext{2, 3, 4}, and tune2fs to findfs
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 43847
Felix Fietkau [Mon, 5 Jan 2015 13:03:12 +0000 (13:03 +0000)]
hostapd: Add uapsd option to netifd.sh
The uapsd option sets the uapsd_advertisement_enabled flag in hostapd.
The check for phy support is already implemented here in hostapd since 2011:
http://w1.fi/cgit/hostap/commit/?id=
70619a5d8a3d32faa43d66bcb1b670cacf0c243e
So this can be safely set to 1 as default.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43846
Felix Fietkau [Mon, 5 Jan 2015 13:03:07 +0000 (13:03 +0000)]
ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c
Move all AR8327/AR8337-specific driver code into a separate source file
ar8327.c and adjust patches so that ar8327.c is compiled if
CONFIG_AR8216_PHY is set.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43845
Felix Fietkau [Mon, 5 Jan 2015 13:02:57 +0000 (13:02 +0000)]
ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h
Move several structure definitions and #defines from ar8216.c
to ar8216.h and move AR8327/AR8337 header stuff into a new
header file ar8327.h.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43844
Felix Fietkau [Mon, 5 Jan 2015 13:02:49 +0000 (13:02 +0000)]
kernel/hwmon: package pwm-fan kernel module
pwm-fan was introduced in kernel 3.18
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43843
Felix Fietkau [Mon, 5 Jan 2015 13:02:44 +0000 (13:02 +0000)]
all targets: remove all =m kernel config symbols
modules build during the kernel compile phase are ignored anyway,
all modules should be built using KernelPackage in
package/kernel/linux/modules/*
selecting the appropriate config symbols there rather than in
target/linux/*/config-*
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43842
Felix Fietkau [Mon, 5 Jan 2015 13:02:31 +0000 (13:02 +0000)]
kernel: bridge: multicast: backport a few more fixes for 3.10
The following patches unfortunately didn't hit the kernel stable
branches yet, therefore cherrypicking them for OpenWRT here:
* bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries
* bridge: multicast: enable snooping on general queries only
* bridge: multicast: add sanity check for general query destination
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
SVN-Revision: 43841
Felix Fietkau [Mon, 5 Jan 2015 13:02:26 +0000 (13:02 +0000)]
octeon: enable VLAN support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43840
Felix Fietkau [Mon, 5 Jan 2015 13:02:21 +0000 (13:02 +0000)]
octeon: remove config-default
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43839
Felix Fietkau [Mon, 5 Jan 2015 13:02:14 +0000 (13:02 +0000)]
kernel/modules: add kmod-crypto-gcm
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43838
Felix Fietkau [Mon, 5 Jan 2015 13:02:08 +0000 (13:02 +0000)]
kernel/modules: add kmod-crypto-ghash
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43837
Felix Fietkau [Mon, 5 Jan 2015 13:02:01 +0000 (13:02 +0000)]
kernel/modules: kmod-crypto-xts: depend on kmod-crypto-gf128
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43836
Felix Fietkau [Mon, 5 Jan 2015 13:01:56 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-gf128
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43835
Felix Fietkau [Mon, 5 Jan 2015 13:01:52 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-ctr
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43834
Felix Fietkau [Mon, 5 Jan 2015 13:01:42 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-seqiv
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43833
Felix Fietkau [Mon, 5 Jan 2015 13:01:36 +0000 (13:01 +0000)]
kernel/modules: remove CRYPTOMGR_MODULES
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43832
Felix Fietkau [Mon, 5 Jan 2015 13:01:30 +0000 (13:01 +0000)]
kernel/modules: kmod-crypto-manager: depend on kmod-crypto-aead
SVN-Revision: 43831
Felix Fietkau [Mon, 5 Jan 2015 13:01:23 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-aead
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43830
projects / openwrt / staging / linusw.git / log