Zoltan Herpai [Fri, 31 Jul 2015 19:57:10 +0000 (19:57 +0000)]
sunxi: CC: fix networking on Olimex A20 Micro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46537
Imre Kaloz [Fri, 31 Jul 2015 18:25:03 +0000 (18:25 +0000)]
mvebu: update dts files for mamba / WRT1900AC (backport of r46530)
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 46531
Imre Kaloz [Fri, 31 Jul 2015 18:08:51 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC (backport of r46527)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46528
Imre Kaloz [Thu, 30 Jul 2015 06:41:43 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware (backport of r46520)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46521
Jo-Philipp Wich [Mon, 27 Jul 2015 23:49:48 +0000 (23:49 +0000)]
CC: sdk: provide explicit CONFIG_MODULES kconfig symbol
Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46514
SVN-Revision: 46515
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:48 +0000 (11:49 +0000)]
CC: dnsmasq: add some missing files to the jail
found with strace, not sure we got all of them though
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46467
SVN-Revision: 46511
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:43 +0000 (11:49 +0000)]
CC: base-files: fix /tmp/.jail permissions
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)
This partly fixes jailed dnsmasq
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46466
SVN-Revision: 46510
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:39 +0000 (11:49 +0000)]
CC: procd: update to latest git HEAD
fixes http://patchwork.ozlabs.org/patch/497899/
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46465
SVN-Revision: 46509
Steven Barth [Mon, 27 Jul 2015 11:48:00 +0000 (11:48 +0000)]
firewall: fix typo in ESP rule
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46508
Steven Barth [Mon, 27 Jul 2015 11:47:56 +0000 (11:47 +0000)]
firewall: comply with REC-22, REC-24 of RFC 6092
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46507
Felix Fietkau [Sun, 26 Jul 2015 13:02:37 +0000 (13:02 +0000)]
ramips: swap radio calibration data pointers for DIR-860L
Fixes low 5 GHz tx power issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46497
SVN-Revision: 46499
Felix Fietkau [Sun, 26 Jul 2015 13:02:35 +0000 (13:02 +0000)]
tools: drop circular dependency between patch and ccache, build patch without ccache (fixes #20132)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46434
SVN-Revision: 46498
Hauke Mehrtens [Sat, 25 Jul 2015 13:54:15 +0000 (13:54 +0000)]
CC: ar71xx: EPG5000 requires ATH79_NVRAM
EPG5000 uses ath79 nvram functions, but does not select it. This breaks
build if no other board support enabling nvram support is selected.
Closes #19952.
Backport of r46190.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46494
Jonas Gorski [Sat, 25 Jul 2015 10:02:47 +0000 (10:02 +0000)]
CC: kernel: update 3.18 to 3.18.19
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19
Backport of r46439.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46487
Jonas Gorski [Sat, 25 Jul 2015 10:02:44 +0000 (10:02 +0000)]
CC: brcm63xx: HG553 buttons support
This patch adds buttons support for Huawei EchoLife HG553.
Backport of r46388.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46486
John Crispin [Fri, 24 Jul 2015 08:58:57 +0000 (08:58 +0000)]
CC: ar71xx: add LED defaults for the EnGenius EPG5000
NB that wlan5g is phy0tpt and wlan2g phy1tpt.
Backport of r46226.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46450
John Crispin [Fri, 24 Jul 2015 08:58:45 +0000 (08:58 +0000)]
CC: ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
The designated blue WAN port on both devices has index 5, not 1.
Backport of r46227.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46449
John Crispin [Fri, 24 Jul 2015 08:58:40 +0000 (08:58 +0000)]
CC: ar71xx: add profile and build image for EnGenius EPG5000.
Backport of r46049.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46448
John Crispin [Fri, 24 Jul 2015 08:58:33 +0000 (08:58 +0000)]
CC: ar71xx: add user-space support for EnGenius EPG5000.
Backport of r46048.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46447
John Crispin [Fri, 24 Jul 2015 08:58:27 +0000 (08:58 +0000)]
CC: ar71xx: add kernel support for EnGenius EPG5000.
Backport of r46047.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46446
John Crispin [Fri, 24 Jul 2015 08:58:20 +0000 (08:58 +0000)]
v3: CC : ar71xx: Backport Support for the Bitmain Antminer S3
Backport of r46236 to CC : add support for the Bitmain Antminer S3
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46445
John Crispin [Fri, 24 Jul 2015 08:58:12 +0000 (08:58 +0000)]
ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Backport of r46342
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46444
John Crispin [Fri, 24 Jul 2015 08:58:07 +0000 (08:58 +0000)]
mac80211: make ath10k firmware v2 selectable
Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing (at least on a QCA9880-BR4A-R) and
this provides the option to select an older version instead.
Backport of r46340
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46443
John Crispin [Fri, 24 Jul 2015 08:58:03 +0000 (08:58 +0000)]
ar71xx: add support for the devolo dLAN pro 500 Wireless+
Backport of r46338
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46442
Florian Fainelli [Sat, 18 Jul 2015 22:36:18 +0000 (22:36 +0000)]
at91: add Device Tree based board detection
Set up eth0 as LAN interface by default.
Backport of r46174
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46419
Florian Fainelli [Sat, 18 Jul 2015 22:35:36 +0000 (22:35 +0000)]
at91: sama5d3: enable USB2 by default
Backport of r46173
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46418
Florian Fainelli [Sat, 18 Jul 2015 22:34:58 +0000 (22:34 +0000)]
kernel: fix OHCI and EHCI modules for AT91
We were not copying the additional files needed to get USB to work on
the AT91 platforms, make sure we do this.
Backport of r46172
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46417
Florian Fainelli [Sat, 18 Jul 2015 22:33:08 +0000 (22:33 +0000)]
at91: enable Micrel PHY driver
The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported
by this PHY driver.
Backport of r46171
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46416
Felix Fietkau [Sat, 18 Jul 2015 16:56:28 +0000 (16:56 +0000)]
mt76: backport rx buffer allocation fix from r46409
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46412
Felix Fietkau [Sat, 18 Jul 2015 16:56:25 +0000 (16:56 +0000)]
ramips: enable mt76 by default for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46410
SVN-Revision: 46411
Jo-Philipp Wich [Fri, 17 Jul 2015 11:37:47 +0000 (11:37 +0000)]
CC: toplevel.mk: fix LD_LIBRARY_PATH for host binaries
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46394
SVN-Revision: 46395
Rafał Miłecki [Tue, 14 Jul 2015 10:32:51 +0000 (10:32 +0000)]
ubox: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
This adds support for filtering messages
Backport of r46356
SVN-Revision: 46365
Steven Barth [Mon, 13 Jul 2015 21:52:25 +0000 (21:52 +0000)]
odhcp6c: fix some more compatibility issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46337
Steven Barth [Mon, 13 Jul 2015 21:52:14 +0000 (21:52 +0000)]
odhcp6c: work-around more ISP DHCPv6-PD issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46336
Hauke Mehrtens [Sun, 12 Jul 2015 16:03:51 +0000 (16:03 +0000)]
CC: curl: fix some security vulnerabilities
This fixes the following security vulnerabilities in curl:
* CVE-2015-3143
* CVE-2015-3144
* CVE-2015-3145
* CVE-2015-3148
* CVE-2015-3153
* CVE-2015-3236
* CVE-2015-3237
This was fixed in trunk with update to version 7.43.0 in r46169.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46312
Hauke Mehrtens [Sun, 12 Jul 2015 16:03:09 +0000 (16:03 +0000)]
CC: kernel: fix loading bluetooth_6lowpan
Backprot of r46179
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46311
Hauke Mehrtens [Sun, 12 Jul 2015 16:02:47 +0000 (16:02 +0000)]
CC: kernel: add missing config option
This should fix build of sunxi.
Backport of r46304
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46310
Hauke Mehrtens [Sun, 12 Jul 2015 16:02:34 +0000 (16:02 +0000)]
CC: kernel: update 3.18 to 3.18.18
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18
Backport of r46299, r46303 and r46308.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46309
Felix Fietkau [Fri, 10 Jul 2015 11:37:36 +0000 (11:37 +0000)]
ebtables: remove partially broken musl fix
See http://patchwork.ozlabs.org/patch/493573/ for more information
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46293
Felix Fietkau [Fri, 10 Jul 2015 11:28:44 +0000 (11:28 +0000)]
toolchain: mark musl as broken for the chaos_calmer branch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46291
Rafał Miłecki [Thu, 9 Jul 2015 18:23:41 +0000 (18:23 +0000)]
mac80211: add brcmfmac patch fixing user space picked MACs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46288
SVN-Revision: 46290
Rafał Miłecki [Thu, 9 Jul 2015 18:23:35 +0000 (18:23 +0000)]
mac80211: try to workaround some brcmfmac bug with handling interfaces
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46278
SVN-Revision: 46289
Jo-Philipp Wich [Thu, 9 Jul 2015 13:15:19 +0000 (13:15 +0000)]
CC: openssl: update to v1.0.2d (CVE-2015-1793)
During certificate verification, OpenSSL (starting from version 1.0.1n and
1.0.2b) will attempt to find an alternative certificate chain if the first
attempt to build such a chain fails. An error in the implementation of this
logic can mean that an attacker could cause certain checks on untrusted
certificates to be bypassed, such as the CA flag, enabling them to use a valid
leaf certificate to act as a CA and "issue" an invalid certificate.
This issue will impact any application that verifies certificates including
SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46285
SVN-Revision: 46286
John Crispin [Thu, 9 Jul 2015 05:29:25 +0000 (05:29 +0000)]
x86/xen_domu: enable image generation
Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.
This fixes #18074.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Backport of r46233
SVN-Revision: 46277
Rafał Miłecki [Wed, 8 Jul 2015 06:06:07 +0000 (06:06 +0000)]
nvram: get rid of NVRAM_SPACE
Now we support NVRAM whatever its size is.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46262
SVN-Revision: 46263
Rafał Miłecki [Wed, 8 Jul 2015 05:45:09 +0000 (05:45 +0000)]
nvram: fix displayed info about NVRAM size
Use actual partition size and content offset to calculate it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46260
SVN-Revision: 46261
Rafał Miłecki [Wed, 8 Jul 2015 04:55:10 +0000 (04:55 +0000)]
Revert "Revert "nvram: increase NVRAM size to 64 KiB""
This reverts commit r45579.
With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.
It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)
And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)
This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46253
SVN-Revision: 46259
Rafał Miłecki [Wed, 8 Jul 2015 04:55:04 +0000 (04:55 +0000)]
nvram: fix "Segmentation fault" caused by setting memory out of buffer
Some MTD partitions with NVRAM have content starting in the middle. In
such case offset is set and nvram_header returns pointer to the middle.
It means we have to respect offset when calculating remaining space.
By the way use real MTD partition size (nvram_part_size variable) as we
may want to bump NVRAM_SPACE in the (very near) future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46251
SVN-Revision: 46258
Rafał Miłecki [Wed, 8 Jul 2015 04:54:57 +0000 (04:54 +0000)]
procd: update to the latest version, fix stdout logging
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46212
SVN-Revision: 46257
Felix Fietkau [Tue, 7 Jul 2015 21:52:29 +0000 (21:52 +0000)]
ar71xx: fix kernel Oops in at803x_link_change_notify
r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range
extender") introduced a pdata based modification of the tx_clk_dly. But it
was not checked if pdata actually existed. This caused a page fault on all
devices which didn't have at803x_platform_data specified for an at803x
based device.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r46200
SVN-Revision: 46252
Steven Barth [Tue, 7 Jul 2015 11:30:39 +0000 (11:30 +0000)]
scripts/feeds: observe -p flag for preferential feeds
lookup_target was trampling the $feed variable, resulting in the -p flag
no longer preferentially installing from the named feed.
Make sure to use a local variable for this instead.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 46213
Jonas Gorski [Sat, 4 Jul 2015 12:53:57 +0000 (12:53 +0000)]
CC: kernel: kmod-scsi-core: fix load on install
sd_mod depends on scsi_mod, but due to it being an AutoLoad and not
AutoProbe module, it was not loading when installing the package,
causing unknown symbol errors for sd_mod and anything depending on it.
Closes #14927, #18293, #19351.
Backport of r46176.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46177
Jo-Philipp Wich [Fri, 3 Jul 2015 13:38:12 +0000 (13:38 +0000)]
CC: uclibc++: make g++-uc* wrappers relocatable
The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which
will not work outside of the original build environment.
Replace the hardcoded staging_dir occurences with paths relative to the
$STAGING_DIR environment variable to make the g++-uc* wrappers usable in an
SDK environment.
Fixes the libdb47 build failure reported at
https://lists.openwrt.org/pipermail/openwrt-devel/2015-April/032455.html
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46162
SVN-Revision: 46163
Felix Fietkau [Thu, 2 Jul 2015 11:45:39 +0000 (11:45 +0000)]
ath9k: make DMA stop related messages debug-only (#11862, #9654)
A long time ago, ath9k had issues during reset where the DMA engine
would stay active and could potentially corrupt memory.
To debug those issues, the driver would print warnings whenever they
occur.
Nowadays, these issues are gone and the primary cause of these messages
is if the MAC is stuck during reset or busy processing a long
transmission. This is fairly harmless, yet these messages continue to
worry users.
To reduce the number of bogus bug reports, turn these messages into
debug messages and count their occurence in the "reset" debugfs file.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46158
SVN-Revision: 46159
Felix Fietkau [Thu, 2 Jul 2015 11:26:28 +0000 (11:26 +0000)]
mdns: fix ubus wait_for command
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46156
SVN-Revision: 46157
Jonas Gorski [Wed, 1 Jul 2015 00:32:10 +0000 (00:32 +0000)]
CC: kernel: update 3.18 to 3.18.17
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17
Backport of r46150.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46155
Jonas Gorski [Wed, 1 Jul 2015 00:32:03 +0000 (00:32 +0000)]
CC: brcm63xx: swap a4001n power leds again
This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons").
Fixes #19858.
Backport of r46149.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46154
Jonas Gorski [Wed, 1 Jul 2015 00:32:01 +0000 (00:32 +0000)]
CC: brcm63xx: unbreak board_probe_switch again
Also move it to an earlier place so new boards added are less likely
to confuse quilt.
Fixes #19965.
Backport of r46148.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46153
John Crispin [Mon, 29 Jun 2015 08:24:13 +0000 (08:24 +0000)]
Revert "ar71xx: add profile and build image for EnGenius EPG5000."
This reverts commit
ac3184da4138c54b8a2c1be637be7cf78fc40fce.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46144
John Crispin [Mon, 29 Jun 2015 08:24:07 +0000 (08:24 +0000)]
Revert "ar71xx: add user-space support for EnGenius EPG5000."
This reverts commit
e3326c4473bc6b7b5fd899ac955af974ebc64b92.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46143
John Crispin [Mon, 29 Jun 2015 08:24:03 +0000 (08:24 +0000)]
Revert "ar71xx: add kernel support for EnGenius EPG5000."
This reverts commit
27386b74adfe868f693176f55861984432afd2ce.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46142
Rafał Miłecki [Mon, 22 Jun 2015 07:59:09 +0000 (07:59 +0000)]
b53: Allow using all 8 ports on BCM53011
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46104
SVN-Revision: 46107
Rafał Miłecki [Sun, 21 Jun 2015 20:08:32 +0000 (20:08 +0000)]
bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46088
SVN-Revision: 46103
Rafał Miłecki [Sun, 21 Jun 2015 20:08:27 +0000 (20:08 +0000)]
bcm53xx: enable USB power on Buffalo WZR-1750DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46087
SVN-Revision: 46102
Rafał Miłecki [Sun, 21 Jun 2015 20:08:21 +0000 (20:08 +0000)]
bcm53xx: update SPROM driver to include just-sent patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46086
SVN-Revision: 46101
Rafał Miłecki [Sun, 21 Jun 2015 20:08:11 +0000 (20:08 +0000)]
mac80211: backport some brcmfmac patches
There are two important patches in this patchset: updating read pointer
quicker & rework of .get_station().
There are few more upstream patches that are p2p-related and weren't
backported in this commit.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46084
SVN-Revision: 46100
Rafał Miłecki [Sun, 21 Jun 2015 20:08:03 +0000 (20:08 +0000)]
bcm53xx: enable USB power on Netgear R6250
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46083
SVN-Revision: 46099
Rafał Miłecki [Sun, 21 Jun 2015 20:07:58 +0000 (20:07 +0000)]
bcm53xx: update xHCI patch
This drops some debugging pr_info and adds platform_device_unregister.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46082
SVN-Revision: 46098
Rafał Miłecki [Sun, 21 Jun 2015 20:07:52 +0000 (20:07 +0000)]
bcm53xx: fix enabling GPIO-controlled USB power
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46081
SVN-Revision: 46097
Rafał Miłecki [Sun, 21 Jun 2015 20:07:44 +0000 (20:07 +0000)]
bcm53xx: add xHCI support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46080
SVN-Revision: 46096
Rafał Miłecki [Sun, 21 Jun 2015 20:06:31 +0000 (20:06 +0000)]
ramips: refresh patch with USB_MT7621_XHCI_PLATFORM
Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46085
SVN-Revision: 46095
Rafał Miłecki [Sun, 21 Jun 2015 20:06:24 +0000 (20:06 +0000)]
kernel: make USB_XHCI_PLATFORM selectable
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46079
SVN-Revision: 46094
Rafał Miłecki [Sun, 21 Jun 2015 20:04:48 +0000 (20:04 +0000)]
otrx: optimize memory usage by function checking TRX CRC
Allocating huge buffer for the whole TRX wasn't too optimal.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46078
SVN-Revision: 46093
Rafał Miłecki [Sun, 21 Jun 2015 20:04:42 +0000 (20:04 +0000)]
otrx: make crc32 table global for further optimizations
So far we got only one generic function accessing this table, but
implementing optimizations will require calculating crc32 in other code
parts as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46077
SVN-Revision: 46092
Felix Fietkau [Sun, 21 Jun 2015 17:52:47 +0000 (17:52 +0000)]
ath9k: fix ar956x device detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46090
SVN-Revision: 46091
Imre Kaloz [Fri, 19 Jun 2015 08:35:57 +0000 (08:35 +0000)]
mwlwifi: upgrade to 10.3.0.3 (backport of r46061)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46062
John Crispin [Thu, 18 Jun 2015 20:24:49 +0000 (20:24 +0000)]
ralink: add support for mt7621 switch counters
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>
Backport of r46050
SVN-Revision: 46060
John Crispin [Thu, 18 Jun 2015 20:24:45 +0000 (20:24 +0000)]
ar71xx: add profile and build image for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46049
SVN-Revision: 46059
John Crispin [Thu, 18 Jun 2015 20:24:41 +0000 (20:24 +0000)]
ar71xx: add user-space support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46048
SVN-Revision: 46058
John Crispin [Thu, 18 Jun 2015 20:24:31 +0000 (20:24 +0000)]
ar71xx: add kernel support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46047
SVN-Revision: 46057
John Crispin [Thu, 18 Jun 2015 20:24:26 +0000 (20:24 +0000)]
ar71xx: add support for TL-WR720N-v4.
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Backport of r46046
SVN-Revision: 46056
John Crispin [Thu, 18 Jun 2015 20:24:20 +0000 (20:24 +0000)]
ar71xx: add support for compex wpj531
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Backport of r46045
SVN-Revision: 46055
John Crispin [Thu, 18 Jun 2015 20:24:15 +0000 (20:24 +0000)]
ar71xx: Add Support for the Bitmain Antminer S1
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s1
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>
Backport of r46044
SVN-Revision: 46054
John Crispin [Thu, 18 Jun 2015 20:24:12 +0000 (20:24 +0000)]
ramips: Add Support for the Linksys RE6500
This patch adds support for the Linksys RE6500 Range Extender
http://wiki.openwrt.org/toh/linksys/re6500
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46043
SVN-Revision: 46053
John Crispin [Thu, 18 Jun 2015 20:24:09 +0000 (20:24 +0000)]
ramips: Add support for the D-Link DCS-930 B1
http://wiki.openwrt.org/toh/d-link/dcs-930l
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46042
SVN-Revision: 46052
John Crispin [Thu, 18 Jun 2015 20:24:05 +0000 (20:24 +0000)]
ramips: add support for PandoraBox PBR-M1
This patch is for PandoraBox PBR-M1 which is based on mt7621,
all the features work fine, including rtc, leds, button, usb3.0, etc.
Signed-off-by: tymon <banglang.huang@foxmail.com>
Backport of r46041
SVN-Revision: 46051
John Crispin [Thu, 18 Jun 2015 12:06:15 +0000 (12:06 +0000)]
ramips: fix a bug in the cevt code on mt7620
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46038
SVN-Revision: 46039
Felix Fietkau [Thu, 18 Jun 2015 09:42:00 +0000 (09:42 +0000)]
ar71xx: fix hw id of tl-wr710n image (#19902)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46032
SVN-Revision: 46033
Felix Fietkau [Thu, 18 Jun 2015 06:42:11 +0000 (06:42 +0000)]
procd: update to the latest version, fixes umask handling for creating /dev/shm
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46023
SVN-Revision: 46028
Jo-Philipp Wich [Wed, 17 Jun 2015 11:36:51 +0000 (11:36 +0000)]
CC: x86/64: enable VirtIO block and console support
This is required to use x86/64 in KVM containers with VirtIO disks
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46017
SVN-Revision: 46018
Jonas Gorski [Wed, 17 Jun 2015 10:22:06 +0000 (10:22 +0000)]
ar71xx: rb493g: fix gpio-mdio accesses under load
It seems that there are maximum timings for mdio accesses that can be
hit when the system is under load and the thread is scheduled during
a read or write access. Since there is no way of knowing if this
happens as there is not even a parity bit, try to work around it
by disabling interrupts during any gpio-mdio accesses.
Performance impact seems to be neglectable, as mdio accesses are not
that often.
Hopefully fixes #19500.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Backport of r46012.
SVN-Revision: 46016
Jonas Gorski [Wed, 17 Jun 2015 10:22:04 +0000 (10:22 +0000)]
kernel: update 3.18 to 3.18.16
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Backport of r46011.
SVN-Revision: 46015
Felix Fietkau [Wed, 17 Jun 2015 10:13:42 +0000 (10:13 +0000)]
procd: update to the latest version, fixes /dev/shm permissions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46013
SVN-Revision: 46014
Felix Fietkau [Wed, 17 Jun 2015 09:11:08 +0000 (09:11 +0000)]
ath9k: add another fix for some rx/tx dma stop issues, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46008
SVN-Revision: 46010
Felix Fietkau [Wed, 17 Jun 2015 09:10:08 +0000 (09:10 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46007
SVN-Revision: 46009
Felix Fietkau [Tue, 16 Jun 2015 13:38:37 +0000 (13:38 +0000)]
base-files: replace snapshot key with 15.05 release key
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46002
Felix Fietkau [Tue, 16 Jun 2015 10:51:38 +0000 (10:51 +0000)]
opkg: fix duplicate check_signature line for smime variant (#19863)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r45999
SVN-Revision: 46000
Rafał Miłecki [Tue, 16 Jun 2015 08:32:17 +0000 (08:32 +0000)]
bcm53xx: use USB patches sent upstream by Hauke
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.
A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r45997
SVN-Revision: 45998
Rafał Miłecki [Tue, 16 Jun 2015 05:04:53 +0000 (05:04 +0000)]
kernel: use bcma-hcd.ko on bcm53xx for ohci
On bcm53xx we still need usb-ohci to support USB 1.1 devices and it
obviously needs bcma-hcd.ko that will init controller and register
platform device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r45994
SVN-Revision: 45996
Felix Fietkau [Mon, 15 Jun 2015 21:16:55 +0000 (21:16 +0000)]
kernel: add missing config symbol (#19870)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r45992
SVN-Revision: 45993
projects / openwrt / svn-archive / openwrt.git / log