Felix Fietkau [Mon, 10 Jun 2013 12:42:30 +0000 (12:42 +0000)]
netifd: update to latest version, uses the new uci/blob code from libuci
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36909
Felix Fietkau [Mon, 10 Jun 2013 12:42:25 +0000 (12:42 +0000)]
uci: update to latest version, adds uci<->blobmsg conversion code from netifd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36908
Felix Fietkau [Mon, 10 Jun 2013 12:42:20 +0000 (12:42 +0000)]
libubox: update to latest version, adds some helper function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36907
Steven Barth [Mon, 10 Jun 2013 10:42:34 +0000 (10:42 +0000)]
ppp: correctly handle address when reloading
SVN-Revision: 36904
Steven Barth [Mon, 10 Jun 2013 10:42:15 +0000 (10:42 +0000)]
netifd: improve reloading behaviour
SVN-Revision: 36903
John Crispin [Mon, 10 Jun 2013 08:25:17 +0000 (08:25 +0000)]
lantiq: atm: Use a tasklet to handle incoming packets. Fix #12917.
Incoming packets are now processes in a tasklet instead of in the
irq handler; this should improve latency.
This patch is based on a previous version of ltq-atm driver, which
did implement a tasklet.
It has been tested on a arv4518pw with a
Lantiq Danube for about a month and it seems to work well.
Signed-off-by: Luca Dariz <luca.dariz@gmail.com>
Tested-by: Luca Dariz <luca.dariz@gmail.com>
SVN-Revision: 36902
John Crispin [Mon, 10 Jun 2013 08:25:12 +0000 (08:25 +0000)]
lantiq: Fixes to athxk EEPROM loading
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36901
John Crispin [Mon, 10 Jun 2013 08:25:07 +0000 (08:25 +0000)]
lantiq: make kernel_oldconfig
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36900
John Crispin [Mon, 10 Jun 2013 08:25:02 +0000 (08:25 +0000)]
lantiq: diag.sh with both red and green power LEDs
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36899
John Crispin [Mon, 10 Jun 2013 08:24:56 +0000 (08:24 +0000)]
ramips: add HAME MPR-A2 support
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2
Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
SVN-Revision: 36898
John Crispin [Mon, 10 Jun 2013 08:24:50 +0000 (08:24 +0000)]
ramips: add support for belkin F7C027 wemo/homeautomatisation plug
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 36897
John Crispin [Mon, 10 Jun 2013 08:24:44 +0000 (08:24 +0000)]
procd: make the preinit rules wildcard all buttons for failsafe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36896
John Crispin [Mon, 10 Jun 2013 08:24:39 +0000 (08:24 +0000)]
procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36895
John Crispin [Mon, 10 Jun 2013 08:24:35 +0000 (08:24 +0000)]
ubox: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36894
John Crispin [Mon, 10 Jun 2013 08:24:31 +0000 (08:24 +0000)]
sysupgrade: create state file so procd knows when a sysupgrade is in progress
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36893
John Crispin [Mon, 10 Jun 2013 08:24:25 +0000 (08:24 +0000)]
modules: make all led and button modules used during boot priority 1
This makes sure the modules are symlinked in /etc/modules-boot.d/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36892
John Crispin [Mon, 10 Jun 2013 08:24:13 +0000 (08:24 +0000)]
base-files: fix failsafe via button press
entering failsafe by pressing a button during boot was broken for procd as init
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36891
John Crispin [Mon, 10 Jun 2013 08:24:02 +0000 (08:24 +0000)]
base-files: change PATH order
This allows packages to override busybox applets by placing the new
binaries in /usr/{sbin,bin}
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36890
Jo-Philipp Wich [Sun, 9 Jun 2013 14:39:14 +0000 (14:39 +0000)]
iwinfo: add phyname attribute, this is useful to group networks by radio phy
SVN-Revision: 36889
Jo-Philipp Wich [Sun, 9 Jun 2013 14:39:09 +0000 (14:39 +0000)]
libiwinfo: ignore log messages from wpa_supplicant while scanning
wpa_supplicant may send log and event messages intermixed with the
expected scan results. This makes "iwinfo wlan0 scan" and LuCI
"site survey" display nothing when many AP's are around.
Eliminate the CTRL-EVENT-BSS-ADDED events, interspersed log messages,
lines with unexpected format. Increase timeout to handle the max
number of channels (2.4, 3.6, 4.9, 5 GHz). Insure receive buffer is
null-terminated.
Signed-off-by: Jean-Pierre Tosoni <jp.tosoni@acksys.fr>
SVN-Revision: 36888
Steven Barth [Sat, 8 Jun 2013 13:26:33 +0000 (13:26 +0000)]
netifd: Improve IPv6 source-routing policies
SVN-Revision: 36884
Jonas Gorski [Sat, 8 Jun 2013 11:44:12 +0000 (11:44 +0000)]
netifd: bring wifi down before shutting down
works around wifiX references not being freed on network restart.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36883
Luka Perkov [Sat, 8 Jun 2013 11:36:07 +0000 (11:36 +0000)]
lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36882
Felix Fietkau [Fri, 7 Jun 2013 16:11:56 +0000 (16:11 +0000)]
ath9k: fix paprd descriptor setup
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36881
Felix Fietkau [Fri, 7 Jun 2013 16:04:06 +0000 (16:04 +0000)]
ath9k: improve multicast buffering handling, take care of the MORE_DATA flag properly
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36880
Felix Fietkau [Fri, 7 Jun 2013 13:42:50 +0000 (13:42 +0000)]
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36879
Felix Fietkau [Fri, 7 Jun 2013 13:42:39 +0000 (13:42 +0000)]
kernel/generic: add a few missing kernel config symbols
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36878
Florian Fainelli [Thu, 6 Jun 2013 22:22:20 +0000 (22:22 +0000)]
brcm63xx: add user-space support for Netgear CVG834G
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36877
Florian Fainelli [Thu, 6 Jun 2013 22:22:14 +0000 (22:22 +0000)]
brcm63xx: add kernel space and image support for the Netgear CVG834G
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36876
Florian Fainelli [Thu, 6 Jun 2013 22:22:09 +0000 (22:22 +0000)]
brcm63xx: add Broadcom cable modem firmware format header
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36875
Florian Fainelli [Thu, 6 Jun 2013 22:21:58 +0000 (22:21 +0000)]
brcm63xx: add support for BCM3368
Add support for the Broadcom BCM3368 cable modem chipset, includes:
- Ethernet
- SPI
- UARTs
- GPIOs
- PCI
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36874
Florian Fainelli [Thu, 6 Jun 2013 22:21:52 +0000 (22:21 +0000)]
tools: add Broadcom cable modem firmware image creator
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36873
Jo-Philipp Wich [Thu, 6 Jun 2013 14:12:02 +0000 (14:12 +0000)]
firewall: udpate to git head (#13652, #13654, #13658)
- optimizes chain usage for ingress rules
- adds limit match support for redirect rules
- fixes automatic redirect dest detection on little endian systems
- leaves base chains in place on reload to allow user rules to target e.g. "reject"
SVN-Revision: 36871
Jo-Philipp Wich [Thu, 6 Jun 2013 14:02:29 +0000 (14:02 +0000)]
firewall: copy libext*.a from staging dir and drop kernel.mk includes, solves problem with colliding CONFIG_IPV6 symbols
SVN-Revision: 36868
Jo-Philipp Wich [Thu, 6 Jun 2013 14:02:24 +0000 (14:02 +0000)]
iptables: install libext*.a into staging dir
SVN-Revision: 36867
Steven Barth [Thu, 6 Jun 2013 09:52:00 +0000 (09:52 +0000)]
base-files: use less entropy when generating ULAs
SVN-Revision: 36865
Felix Fietkau [Wed, 5 Jun 2013 23:37:12 +0000 (23:37 +0000)]
gcc: fix arm libgcc issues with 4.8.0 and 4.8-linaro
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36864
Jonas Gorski [Wed, 5 Jun 2013 20:58:59 +0000 (20:58 +0000)]
target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36863
Jonas Gorski [Wed, 5 Jun 2013 20:58:55 +0000 (20:58 +0000)]
omap24xx: convert to use the new jffs2_nand
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36862
Jonas Gorski [Wed, 5 Jun 2013 20:58:53 +0000 (20:58 +0000)]
kirkwood: convert to use the new jffs2_nand
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36861
Jonas Gorski [Wed, 5 Jun 2013 20:58:03 +0000 (20:58 +0000)]
target: split jffs2 NAND out of jffs2
Make jffs2_nand a separate option so this can be triggered without forcing
jffs2 images for nor targets.
Adds a new NAND_BLOCKSIZE variable that allows setting the generated layout
in <page_size>:<block_size> pairs.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36860
Felix Fietkau [Wed, 5 Jun 2013 19:16:20 +0000 (19:16 +0000)]
ath9k: fix a regression in the powersave handling related changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36859
Felix Fietkau [Wed, 5 Jun 2013 19:16:16 +0000 (19:16 +0000)]
ath9k: merge a fix for ar9550 eeprom access
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36858
Nicolas Thill [Wed, 5 Jun 2013 14:34:50 +0000 (14:34 +0000)]
kmod-usb-net-cdc-mbim: fix module loading
cdc_mbim should be loaded after cdc_ncm (closes: #13562)
SVN-Revision: 36856
Jo-Philipp Wich [Wed, 5 Jun 2013 11:40:40 +0000 (11:40 +0000)]
firewall: update to git head (#13652)
- simplifies using ipsets for rules and redirects, match direction can be specified in-place like option ipset 'setname src dst dst'
- uses zone_name_src_ACTION chains for input rules, this fixes logging with log enabled src zones
SVN-Revision: 36854
Imre Kaloz [Wed, 5 Jun 2013 06:46:41 +0000 (06:46 +0000)]
there's no reason to have these generic files in the bin dir either
SVN-Revision: 36852
Imre Kaloz [Wed, 5 Jun 2013 06:17:12 +0000 (06:17 +0000)]
only copy uImages to the bin dir on ramdisk builds
SVN-Revision: 36851
Imre Kaloz [Wed, 5 Jun 2013 06:04:48 +0000 (06:04 +0000)]
don't copy the zImages to the bin dir, factory u-boots can't use them
SVN-Revision: 36850
Felix Fietkau [Wed, 5 Jun 2013 00:21:23 +0000 (00:21 +0000)]
Revert "[tools] mklibs: upgrade to 0.1.37"
It breaks on trying to find ldso
SVN-Revision: 36849
Gabor Juhos [Tue, 4 Jun 2013 13:25:54 +0000 (13:25 +0000)]
ar71xx: add support for WIFI button on tp-link tl-mr3220v2
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36848
Gabor Juhos [Tue, 4 Jun 2013 13:25:52 +0000 (13:25 +0000)]
generic: add port mirroring/monitoring capability to rtl8366rb switch
This patch adds swlib attributes to the RTL8366RB switch/PHY found in the
TL-WR1043ND router that allow to mirror ethernet packets to a monitor port.
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36847
Jo-Philipp Wich [Tue, 4 Jun 2013 12:30:50 +0000 (12:30 +0000)]
firewall3: fix accidentally changed install directive
SVN-Revision: 36840
Jo-Philipp Wich [Tue, 4 Jun 2013 12:23:47 +0000 (12:23 +0000)]
firewall: fix git source url
SVN-Revision: 36839
Jo-Philipp Wich [Tue, 4 Jun 2013 12:21:52 +0000 (12:21 +0000)]
firewall3: rename to firewall, move into base system menu, update to git head with compatibility fixes for AA
SVN-Revision: 36838
Jo-Philipp Wich [Tue, 4 Jun 2013 12:21:44 +0000 (12:21 +0000)]
Drop legacy firewall package
SVN-Revision: 36837
Imre Kaloz [Tue, 4 Jun 2013 11:29:01 +0000 (11:29 +0000)]
versioned files and dirs still make no sense when you support only a single kernel...
SVN-Revision: 36836
Imre Kaloz [Tue, 4 Jun 2013 11:24:42 +0000 (11:24 +0000)]
refresh patches
SVN-Revision: 36835
Imre Kaloz [Tue, 4 Jun 2013 11:23:27 +0000 (11:23 +0000)]
add some more symbols
SVN-Revision: 36834
Imre Kaloz [Tue, 4 Jun 2013 11:19:41 +0000 (11:19 +0000)]
move DT2 related kernel options into the harddist subtarget
SVN-Revision: 36833
Imre Kaloz [Tue, 4 Jun 2013 11:13:18 +0000 (11:13 +0000)]
drop support for the dns323
SVN-Revision: 36832
Jo-Philipp Wich [Tue, 4 Jun 2013 10:26:49 +0000 (10:26 +0000)]
firewall3: update to git head (#13641)
* Fixes wrong chain used for zone forward policy
SVN-Revision: 36830
Felix Fietkau [Tue, 4 Jun 2013 10:21:44 +0000 (10:21 +0000)]
ath9k: fix some issues in the ap powersave fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36829
Felix Fietkau [Mon, 3 Jun 2013 20:58:28 +0000 (20:58 +0000)]
ath9k: fix a null pointer deref issue in the powersave fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36828
Jo-Philipp Wich [Mon, 3 Jun 2013 16:38:29 +0000 (16:38 +0000)]
firewall3: update to git head
- Fixes problems with reusing matches or targets from loadable extensions
SVN-Revision: 36826
Felix Fietkau [Mon, 3 Jun 2013 14:15:57 +0000 (14:15 +0000)]
ath9k: prevent excessive buffered multicast traffic from drowning out regular traffic
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36825
Felix Fietkau [Mon, 3 Jun 2013 14:15:52 +0000 (14:15 +0000)]
ath9k: improve AP mode powersave buffering handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36824
Felix Fietkau [Mon, 3 Jun 2013 14:15:43 +0000 (14:15 +0000)]
ath9k: increase ANI poll interval to 300 ms to get it close to the listen period
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36823
Luka Perkov [Mon, 3 Jun 2013 01:18:48 +0000 (01:18 +0000)]
mpfr: upgrade to 3.1.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36822
Luka Perkov [Mon, 3 Jun 2013 01:18:47 +0000 (01:18 +0000)]
gmp: upgrade to version 5.1.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36821
Luka Perkov [Mon, 3 Jun 2013 01:18:45 +0000 (01:18 +0000)]
mklibs: upgrade to 0.1.37
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36820
Felix Fietkau [Sat, 1 Jun 2013 21:43:06 +0000 (21:43 +0000)]
uhttpd: update to latest version, fixes CGI related crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36817
Steven Barth [Sat, 1 Jun 2013 17:51:02 +0000 (17:51 +0000)]
6relayd: Work around Windows DHCPv6 quirks Announcing deprecated addresses breaks Windows clients
SVN-Revision: 36815
Felix Fietkau [Fri, 31 May 2013 15:42:23 +0000 (15:42 +0000)]
usbmode: fix hotplug script name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36813
Felix Fietkau [Fri, 31 May 2013 15:41:17 +0000 (15:41 +0000)]
replace usb-modeswitch with a rewrite that should be more reliable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36812
Felix Fietkau [Fri, 31 May 2013 15:41:12 +0000 (15:41 +0000)]
procd: update to the latest version, fixes restarting stopped instances based on init script restart
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36811
Steven Barth [Fri, 31 May 2013 13:49:17 +0000 (13:49 +0000)]
odhcp6c: work around spurious false-positive address DECLINEs
SVN-Revision: 36809
John Crispin [Fri, 31 May 2013 13:25:07 +0000 (13:25 +0000)]
lantiq: revert [36779] as it caused a regression
submitter was informed of a endinaess swap regression and replied with "works on my board"
revert the patch and make arv7518 wifi work again
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36807
Jo-Philipp Wich [Fri, 31 May 2013 13:23:23 +0000 (13:23 +0000)]
firewall3: use list notation for default zone network config to avoid "uci add_list" coercing the value wrongly
SVN-Revision: 36806
Steven Barth [Fri, 31 May 2013 10:02:39 +0000 (10:02 +0000)]
odhcp6c: fix handling of multiple RAs in a row
SVN-Revision: 36804
Felix Fietkau [Fri, 31 May 2013 09:19:38 +0000 (09:19 +0000)]
libubox: update to latest version, fixes some ustream issues that might be affecting uhttpd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36803
Florian Fainelli [Thu, 30 May 2013 22:04:54 +0000 (22:04 +0000)]
toolchain: do not build GDB when using an external toolchain
The external toolchain should provide it if needed.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36802
Gabor Juhos [Thu, 30 May 2013 17:38:31 +0000 (17:38 +0000)]
ar71xx: register USB port for RB2011U* devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36801
Gabor Juhos [Thu, 30 May 2013 17:38:30 +0000 (17:38 +0000)]
ar71xx: create a separated network interface for the RB2011UAS SFP port
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36800
Gabor Juhos [Thu, 30 May 2013 17:38:28 +0000 (17:38 +0000)]
ar71xx: make the SFP port usable on RB2011*S boards
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36799
Gabor Juhos [Thu, 30 May 2013 17:38:26 +0000 (17:38 +0000)]
generic: ar8216: allow to specify SGMII config via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36798
Gabor Juhos [Thu, 30 May 2013 17:38:22 +0000 (17:38 +0000)]
generic: ar8216: add get_port_link callback
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36797
Gabor Juhos [Thu, 30 May 2013 17:38:21 +0000 (17:38 +0000)]
ar71xx: rb2011: add switch led control values
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36796
Gabor Juhos [Thu, 30 May 2013 17:38:20 +0000 (17:38 +0000)]
ar71xx: rb2011: update RGMII RX/TX delay values
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36795
Gabor Juhos [Thu, 30 May 2013 17:38:17 +0000 (17:38 +0000)]
ar71xx: rb2011: move NAND nCE init to rb2011_nand_init
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36794
Gabor Juhos [Thu, 30 May 2013 17:38:15 +0000 (17:38 +0000)]
ar71xx: add user-space support for RB2011UAS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36793
Gabor Juhos [Thu, 30 May 2013 17:38:13 +0000 (17:38 +0000)]
ar71xx: add kernel support for the RB2011UAS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36792
Gabor Juhos [Thu, 30 May 2013 16:25:14 +0000 (16:25 +0000)]
generic: ar8216: show chip revision in the kernel log
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36791
Gabor Juhos [Thu, 30 May 2013 16:23:10 +0000 (16:23 +0000)]
ar71xx: add profile and build image for the Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36790
Gabor Juhos [Thu, 30 May 2013 16:23:09 +0000 (16:23 +0000)]
ar71xx: add user-space support for TP-LINK Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36789
Gabor Juhos [Thu, 30 May 2013 16:23:07 +0000 (16:23 +0000)]
ar71xx: add kernel support for the TP-LINK Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36788
Gabor Juhos [Thu, 30 May 2013 16:23:06 +0000 (16:23 +0000)]
ar71xx: add USB workarounds for AR934x/QCA955x SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36787
Gabor Juhos [Thu, 30 May 2013 16:19:30 +0000 (16:19 +0000)]
ar71xx: add profile and build image for the DIR-601-B1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36786
Gabor Juhos [Thu, 30 May 2013 16:19:29 +0000 (16:19 +0000)]
ar71xx: allow to build CameoHornet images for multiple regions
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36785
Gabor Juhos [Thu, 30 May 2013 16:19:28 +0000 (16:19 +0000)]
ar71xx: allow to override fw version in CameoHornet profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36784
John Crispin [Thu, 30 May 2013 16:01:06 +0000 (16:01 +0000)]
lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
The GPIO buttons of ARV752DPW are active low.
Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.
This fixes: https://dev.openwrt.org/ticket/12642
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
SVN-Revision: 36783
projects / openwrt / openwrt.git / log