Hank Moretti [Mon, 28 Aug 2023 15:45:05 +0000 (15:45 +0000)]
mediatek: fix sysupgrade error for WR30U
The NMBM-Enabled layout did not use fit image,
it just need default process. So it was been removed in platform.sh.
It will fix sysupgrade error for xiaomi,mi-router-wr30u-112m-nmbm.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
(cherry picked from commit
02214ab8dce59ee6b599f8dfdacb0297dc5dcc24)
Chuanhong Guo [Tue, 23 Jan 2024 11:20:47 +0000 (19:20 +0800)]
mediatek: drop NMBM layout for Xiaomi WR30U
This reverts commit
dcdcfc15115a1038e90f21f5aa41726d9c7e2fe5.
This is a firmware for third-party u-boot mod, which should not
be carried here by us.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
(cherry picked from commit
1b7e62b20b1735fcdc498a35e005afcd775abcf4)
Dim Fish [Mon, 27 Nov 2023 09:01:34 +0000 (12:01 +0300)]
mediatek: filogic: add support for Xiaomi AX3000T
**SoC**: MediaTek MT7981B 2x A53
**Flash**: ESMT F50L1G41LB 128MB
**RAM**: NT52B128M16JR-FL 256MB
**Ethernet**: 4x 10/100/1000 Mbps
**Switch**: MediaTek MT7531AE
**WiFi**: MediaTek MT7976C
**Buttons**: Reset, Mesh
**Power**: DC 12V 1A
1. Get ssh access. Supported stock firmware **1.0.47**
```
curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20set%20ssh_en%3D1%0A"
curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20commit%0A"
curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Ased%20-i%20's%2Fchannel%3D.*%2Fchannel%3D%22debug%22%2Fg'%20%2Fetc%2Finit.d%2Fdropbear%0A"
curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A"
curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=********/api/misystem/arn_switch" -d "open=1&model=1&level=%0Apasswd%20-d%20root%0A
```
2. Backup stock partitions
```
nanddump -f /tmp/BL2.bin /dev/mtd1
nanddump -f /tmp/Nvram.bin /dev/mtd2
nanddump -f /tmp/Bdata.bin /dev/mtd3
nanddump -f /tmp/Factory.bin /dev/mtd4
nanddump -f /tmp/FIP.bin /dev/mtd5
nanddump -f /tmp/ubi.bin /dev/mtd8
nanddump -f /tmp/KF.bin /dev/mtd12
```
Then transfer them to your computer in a safe place.
3. Get firmware information `cat /proc/cmdline`
4. Copy openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi to **/tmp** and flash
If **firmware=0**
```
ubiformat /dev/mtd9 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi
nvram set boot_wait=on
nvram set uart_en=1
nvram set flag_boot_rootfs=1
nvram set flag_last_success=1
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
reboot
```
If **firmware=1**
```
ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi
nvram set boot_wait=on
nvram set uart_en=1
nvram set flag_boot_rootfs=0
nvram set flag_last_success=0
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
reboot
```
Then reboot your router, it should boot to the OpenWrt initramfs system now.
5. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin
`sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin`
1. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb
`ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb`
`reboot`
2. Install kmod-mtd-rw
`opkg update && opkg install kmod-mtd-rw`
`insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
3. Format ubi and create new ubootenv volume
```
ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
```
4. *(Optional **-10Mb** free space) Add recovery boot feature.*
```
ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB
ubiupdatevol /dev/ubi0_2 /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb
```
5. Flash Openwrt U-Boot
```
mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin BL2
mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip FIP
```
6. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb
`sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb`
1. Force flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb
`sysupgrade -F -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb`
2. Format ubi and Nvram
```
ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8
mtd erase Nvram
```
3. Install kmod-mtd-rw
`opkg update && opkg install kmod-mtd-rw`
`insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
4. Flash stock images from backup
```
mtd write /tmp/BL2.bin BL2
mtd write /tmp/FIP.bin FIP
mtd write /tmp/ubi.bin ubi
```
Then reboot your router, waiting it finished rollback in minutes.
`ubiformat /dev/mtd7 -y -f /tmp/ubi.bin`
Then reboot your router, waiting it finished rollback in minutes.
Signed-off-by: Dim Fish <dimfish@gmail.com>
(cherry picked from commit
7dbcc1215a56cc1da68c81bf92d7efa174c5e051)
Paul Geraedts [Sat, 24 Feb 2024 08:01:01 +0000 (09:01 +0100)]
mediatek: filogic: fix failsafe mode on devices with no lan1
Default to lan4 port, instead of (missing) lan1 port,
to fix failsafe mode on Xiaomi AX3000T, WR30U, AX6000
Build system: x86/64
Build-tested: mediatek/filogic/xiaomi_mi-router-ax3000t-ubootmod
Run-tested: mediatek/filogic/xiaomi_mi-router-ax3000t-ubootmod
Signed-off-by: Paul Geraedts <p.f.j.geraedts@gmail.com>
(cherry picked from commit
8256d06933e7542ecdd427b6a0ef4e87bb37d3f4)
Alexandru Gagniuc [Wed, 3 Apr 2024 19:32:08 +0000 (14:32 -0500)]
wifi-scripts: fix creation of IBSS in legacy (non-HT) mode
When an IBBS interface is configured for IBSS legacy mode, wdev.htmode
is empty. This is empty string results in an empty positional argument
to the "ibbs join" command, for example:
iw dev phy0-ibss0 ibss join crymesh 2412 '' fixed-freq beacon-interval 100
This empty argument is interpreted as an invalid HT mode by 'iw',
causing the entire command to fail and print a "usage" message:
daemon.notice netifd: radio0 (4527): Usage: iw [options] \
dev <devname> ibss join <SSID> <freq in MHz> ...
Although nobody will ever need more than 640K of IBSS, explicitly use
"NOHT" if an HT mode is not given. This fixes the problem.
Fixes: e56c5f7b276a ("hostapd: add ucode support, use ucode for the main ubus object")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [extend to cover more cases]
(cherry picked from commit
cee9fcdb7350911f474544189817d25fd4070111)
Rany Hany [Sun, 5 May 2024 22:39:58 +0000 (01:39 +0300)]
mediatek: fix broken PCIe caused by update to 5.15.158
The patch "710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch"
makes use of "syscon_regmap_lookup_by_phandle" which requires that
"syscon" be in the compatible list.
Without this patch, PCIe probe will fail with the following error:
[ 1.287467] mtk-pcie
1a143000.pcie: host bridge /pcie@
1a143000 ranges:
[ 1.294019] mtk-pcie
1a143000.pcie: Parsing ranges property...
[ 1.299901] mtk-pcie
1a143000.pcie: MEM 0x0020000000..0x0027ffffff -> 0x0020000000
[ 1.307954] mtk-pcie
1a143000.pcie: missing hifsys node
[ 1.313185] mtk-pcie: probe of
1a143000.pcie failed with error -22
Fixes: 01c58a0d2a ("kernel: bump 5.15 to 5.15.158")
Signed-off-by: Rany Hany <rany_hany@riseup.net>
(cherry picked from commit
8607372b410fbb24b08de97ff5941341d0870d6f)
Christian Marangi [Wed, 22 May 2024 10:41:10 +0000 (12:41 +0200)]
tools: refresh all patches
Refresh all tools patches now that tools/refresh correctly works.
CI now checks for them and actively complain if tools have unrefreshed
patches.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 25 Sep 2023 00:29:31 +0000 (02:29 +0200)]
quilt.mk: don't error on refresh/update if patches doesn't exist
The current code fails if we have package or host tools with no patches
to apply. The error printend is the following: (taking ubus as an
example)
make[2]: Entering directory '/home/ansuel/openwrt-ansuel/openwrt/scripts/config'
make[2]: 'conf' is up to date.
make[2]: Leaving directory '/home/ansuel/openwrt-ansuel/openwrt/scripts/config'
make[1]: Entering directory '/home/ansuel/openwrt-ansuel/openwrt'
make[2]: Entering directory '/home/ansuel/openwrt-ansuel/openwrt/package/system/ubus'
The source directory contains no quilt patches.
make[2]: *** [Makefile:81: quilt-check] Error 1
make[2]: Leaving directory '/home/ansuel/openwrt-ansuel/openwrt/package/system/ubus'
time: package/system/ubus/refresh#0.06#0.00#0.07
ERROR: package/system/ubus failed to build.
make[1]: *** [package/Makefile:120: package/system/ubus/refresh] Error 1
make[1]: Leaving directory '/home/ansuel/openwrt-ansuel/openwrt'
make: *** [/home/ansuel/openwrt-ansuel/openwrt/include/toplevel.mk:232: package/ubus/refresh] Error 2
We exit 1 after saying that there are no patches because later in the
function quilt pop fails to execute.
Having no patches for a package and calling refresh should not be
a critical error and the function should just do nothing.
To handle this improve quilt.mk with the following addition.
- If we don't have any patch for the package, we print a warning and we
create an empty series. This is useful to trick quilt and make it do
nothing.
We also create a status file .quilt_no_patch to detect in the other
function that we don't have patches to handle.
- In refresh makefile target, we check if .quilt_no_patch exist and
we skip quilt cleanup if this exist.
- In RefreshDir function we change the logic and now we delete the
patches directory and not only the content. This is done as a cleanup
to clean case with empty patches directory.
- In RefreshDir we check if .quilt_no_patch exist and we skip creating
the patches directory and copying the refreshed patches.
- In RefreshDir we delete at the end any trace of .quilt_no_patch if
present.
This is needed to support run like package/refresh that will run the
refresh process on any package present in the buildroot.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
9536446965e853231e34c4e5dc4cf13f838b9e90)
Christian Marangi [Mon, 25 Sep 2023 00:26:43 +0000 (02:26 +0200)]
quilt.mk: use CURDIR instead of ./ for PATCH_DIR and FILES_DIR
To better reference them for diagnostic use, reference the PATCH_DIR and
FILES_DIR with the absolute path instead of using ./ and reference by
the relative location.
No behaviour change intended.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
bb1bfb46020b38179ef97d30333c90ab00b71c97)
Christian Marangi [Wed, 22 May 2024 09:56:45 +0000 (11:56 +0200)]
tools/padjffs2: use Host/Prepare/Default instead of raw commands
Now that Host/Prepare/Default is always defined, we can use that instead
of using raw commands to move files from the src directory to
HOST_BUILD_DIR.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
01048c7456785bc4a45452c84d8f31635e1fa60b)
Christian Marangi [Wed, 22 May 2024 09:53:52 +0000 (11:53 +0200)]
tools/missing-macros: install files from HOST_BUILD_DIR instead of src
Install files from HOST_BUILD_DIR instead of src. These files are now
correctly copied to HOST_BUILD_DIR and can be referenced from there.
(cherry picked from commit
46bcbe42236bbe058eaeb89a0d1a4f22926cfdf9)
[ rebased on top of openwrt-23.05 ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Wed, 22 May 2024 09:38:49 +0000 (11:38 +0200)]
host-build: always define Host/Prepare/Default
We currently skip defining Host/Prepare/Default if HOST_UNPACK is not
defined.
This is mostly the case for Host packages that just provide files with
the src directory and don't need to be downloaded/extracted.
This was probably done lots of times ago due to quilt causing error as
the patches directory wasn't present.
This has changed now and quilt can correctly detect if no patches needs
to be applied (instead of terminating with error)
Always define Host/Prepare/Default to make tools/refresh correctly works
as HOST_QUILT is hardcoded enabled for this make target and will
complain for tool not prepared for quilt patches.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
725389b7c745b0fa68426986c9bca14171f16887)
Yuu Toriyama [Sat, 18 May 2024 22:08:37 +0000 (07:08 +0900)]
wireless-regdb: update to 2024.05.08
Changes:
73529a8 Revert "wireless-regdb: Update and disable 5470-5730MHz band according to TPC requirement for Singapore (SG)"
87941e4 wireless-regdb: Update regulatory rules for Taiwan (TW) on 6GHz
33797ae wireless-regdb: update regulatory database based on preceding changes
Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
(cherry picked from commit
65c1f0d433e89c794a6d22dbe474666c241f9e7b)
Rafał Miłecki [Sat, 18 May 2024 12:56:58 +0000 (14:56 +0200)]
mt76: fix mt7603 compilation
This fixes:
mt7603/dma.c: In function 'mt7603_rx_loopback_skb':
mt7603/dma.c:60:17: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
Fixes: 2568b30285ff ("mt76: backport mt7603 fixes important for its stability")
Fixes: https://github.com/openwrt/openwrt/issues/15510
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Robert Marko [Thu, 16 May 2024 10:03:19 +0000 (12:03 +0200)]
ipq806x: mr42/mr52: fix PCIe ports
All three PCIe ports are reported non working on Meraki MR42/MR52 boards
since kernel 6.1 with the issue of PCIe PHY link never coming up thus
no WLAN cards are available on the boards.
After debugging it seems that PCIe worked on 5.15 and older purely by
accident as device DTS was using /delete-property/ perst-gpios; in each
of the 3 PCIe nodes but there was no "perst-gpios" property in the SoC DTSI
as it was still using the older "perst-gpio" property so it was not getting
removed from the device DTS.
However, in kernel 6.1 commit ("ARM: dts: qcom-*: replace deprecated
perst-gpio with perst-gpios") updated all Qualcomm DTS-es to use the newer
"perst-gpios" and thus once ipq806x moved to 6.1 PCIe stopped working as
now that property was being dropped from the device DTS.
So, since the removal of PERST pins seems to have been wrong from the start
lets drop the property removal from MR42/MR52.
Fixes: #15408
Link: https://github.com/openwrt/openwrt/pull/15509
Link: https://github.com/openwrt/openwrt/pull/15512
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rafał Miłecki [Thu, 16 May 2024 12:11:24 +0000 (14:11 +0200)]
mt76: backport mt7603 fixes important for its stability
Those are required for stable MT7603E & on-SoC MT7628/MT7688 wireless
support. After mt76 receiving more testing we may just update codebase
and drop those backports.
Fixes: https://github.com/openwrt/mt76/issues/865
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Thu, 16 May 2024 12:06:12 +0000 (14:06 +0200)]
mt76: update to Git HEAD (2024-02-03)
a9693e1979c2 linux-firmware: add firmware for MT7996
0258dc90e3a1 wifi: mt76: mt7603: fix reading target power from eeprom
3e81173d9e2b wifi: mt76: mt7603: initialize chainmask
786a339bac36 wifi: mt76: mt7996: fix fortify warning
bc37a7ebc267 wifi: mt76: mt7996: fix fw loading timeout
027bab6a88a3 wifi: mt76: usb: create a dedicated queue for psd traffic
e8909c610c3b wifi: mt76: usb: store usb endpoint in mt76_queue
8b3d96fa4ead wifi: mt76: mt792xu: enable dmashdl support
7864d7ad0ed0 wifi: mt76: mt76x2u: add netgear wdna3100v3 to device table
27c81f7c1480 wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band
b7443c63069a wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band
bab721a65f5a wifi: mt76: mt7925: fix mcu query command fail
1f0f71ed81e8 wifi: mt76: mt7925: fix wmm queue mapping
bcfe2ad966f3 wifi: mt76: mt7925: fix fw download fail
f982c3d67a29 wifi: mt76: mt7925: fix WoW failed in encrypted mode
6a72716ec213 wifi: mt76: mt7925: fix the wrong header translation config
50928b7e1359 wifi: mt76: mt7925: add flow to avoid chip bt function fail
762ab4530e8f wifi: mt76: mt7925: add support to set ifs time by mcu command
87deaf82efa4 wifi: mt76: mt7925: update PCIe DMA settings
c190c1576522 wifi: mt76: mt7925: support temperature sensor
025d5734caba wifi: mt76: mt7996: check txs format before getting skb by pid
4768bfa2baca wifi: mt76: mt7996: fix TWT issues
a65e3eced907 wifi: mt76: mt7996: disable AMSDU for non-data frames
d71716d93aee wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps
f21728f3f4bd wifi: mt76: mt7996: ensure 4-byte alignment for beacon commands
68dad7dacd2a wifi: mt76: mt7996: fix HE beamformer phy cap for station vif
66a28f340cdc wifi: mt76: mt7996: mark GCMP IGTK unsupported
b47ad8a7764e wifi: mt76: mt7996: fix efuse reading issue
c2fc7dae7b72 wifi: mt76: mt7996: remove TXS queue setting
e0f1ed168ed5 wifi: mt76: mt7996: add locking for accessing mapped registers
d0cc92c1fd08 wifi: mt76: connac: set correct muar_idx for mt799x chipsets
ae0c62279adc wifi: mt76: mt7996: fix HIF_TXD_V2_1 value
ecc14276af54 wifi: mt76: mt792x: fix ethtool warning
9827df56b241 wifi: mt76: move wed common utilities in wed.c
dccbd2598505 wifi: mt76: mt7925: fix the wrong data type for scan command
9907f4f20261 wifi: mt76: mt792x: add the illegal value check for mtcl table of acpi
1b088a7ac06d wifi: mt76: mt7921e: fix use-after-free in free_irq()
f3c5b4820d7f wifi: mt76: mt7925e: fix use-after-free in free_irq()
d75eac9f5531 wifi: mt76: mt7921: fix incorrect type conversion for CLC command
7bd5401f5bb1 wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI
ea55196bc4a0 wifi: mt76: mt792x: update the country list of EU for ACPI SAR
6124ea9135ed wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspend
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
114190d8ae61fb3a7671852fbd7f0ca3279a5625)
[rmilecki: add patches/fixes for regressions from this commit]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Thu, 16 May 2024 12:06:06 +0000 (14:06 +0200)]
mt76: update to Git HEAD (2024-01-18)
83e3947e2c52 linux-firmware: update firmware for MT7922 WiFi device
ddaa8cb6e81a linux-firmware: update firmware for MT7921 WiFi device
f83b1601cc10 linux-firmware: update firmware for MT7922 WiFi device
61d334ab0f33 linux-firmware: add firmware for MT7925
a7836e4c8a60 wifi: mt76: disable HW AMSDU when using fixed rate
a8571ebbcd95 wifi: mt76: check txs format before getting skb by pid
3d5890e2cab3 wifi: mt76: mt7915: fix error recovery with WED enabled
703c26d01197 wifi: mt76: mt7915: add locking for accessing mapped registers
f77188160441 wifi: mt76: mt7915: update mt798x_wmac_adie_patch_7976
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
a28cedbdab96be9bee39bb70098a1508c0252a8a)
Hauke Mehrtens [Sat, 11 May 2024 17:52:13 +0000 (19:52 +0200)]
kernel: bump 5.15 to 5.15.158
Removed because they are upstream:
generic/backport-5.15/702-v5.19-01-arm64-dts-mediatek-mt7622-add-support-for-coherent-D.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
506ac5538498717fce699feaddb2ed97ae1c3ca7
generic/backport-5.15/702-v5.19-04-arm64-dts-mediatek-mt7622-introduce-nodes-for-Wirele.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
2f83d3d2cc3c0df89f833cd8c09989187f0c3ce1
Manually adapted:
generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
1fae75ebd968f9cc1f254dbcdf6a16b27c2b3145)
Hauke Mehrtens [Sun, 28 Apr 2024 19:35:55 +0000 (21:35 +0200)]
kernel: bump 5.15 to 5.15.157
Removed because they are upstream:
generic/backport-5.15/741-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
d06977b9a4109f8738bb276125eb6a0b772bc433
Removed because they are upstream:
generic/backport-5.15/741-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
e719b52d0c56989b0f3475a03a6d64f182c85b56
Manual adapted the following patches:
generic/pending-5.15/700-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
generic/pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch
generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
84d0b0b925997f8c2d1a21a60c79f76d3070ae3e)
Hauke Mehrtens [Sun, 28 Apr 2024 10:58:23 +0000 (12:58 +0200)]
kernel: bump 5.15 to 5.15.156
No manual changes needed.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
1fbe41f4899aa05fceeb58100c9353b7d60cccca)
Corey Minyard [Fri, 3 May 2024 13:14:31 +0000 (08:14 -0500)]
ipq40xx: Enable the Engenius EAP1300
Now that DSA is enabled and the MAC addresses are set properly, we can
use it.
Signed-off-by: Corey Minyard <minyard@acm.org>
Link: https://github.com/openwrt/openwrt/pull/15358
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15402
Signed-off-by: Robert Marko <robimarko@gmail.com>
Corey Minyard [Fri, 3 May 2024 13:12:38 +0000 (08:12 -0500)]
ipq40xx: Properly set MAC addresses for the EAP1300
The code that was there was just taking whatever was left in the
registers, which was just wrong. Set the addresses using the value from
the u-boot environment, the same way the OEM firmware does.
Signed-off-by: Corey Minyard <minyard@acm.org>
Link: https://github.com/openwrt/openwrt/pull/15358
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15402
Signed-off-by: Robert Marko <robimarko@gmail.com>
Corey Minyard [Wed, 1 May 2024 20:43:16 +0000 (15:43 -0500)]
ipq40xx: convert Engenius EAP1300 to DSA
This commit converts the EAP1300 to DSA setup.
Signed-off-by: Corey Minyard <minyard@acm.org>
Link: https://github.com/openwrt/openwrt/pull/15358
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15402
Signed-off-by: Robert Marko <robimarko@gmail.com>
Corey Minyard [Thu, 2 May 2024 19:11:04 +0000 (14:11 -0500)]
ipq40xx: Enable NVMEM_U_BOOT_ENV config
It's needed to get the MAC addresses for the Engenius EAP1300.
Signed-off-by: Corey Minyard <minyard@acm.org>
Link: https://github.com/openwrt/openwrt/pull/15358
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15402
Signed-off-by: Robert Marko <robimarko@gmail.com>
David Bauer [Thu, 25 Apr 2024 14:53:55 +0000 (16:53 +0200)]
mpc85xx: convert WS-AP3710i to simpleImage wrapper
Convert the Enterasys WS-AP3710i access point to use the simpleImage
wrapper.
This is necessary, as the bootlaoder does not align the DTB correctly
(and does not support altering the FDT loadaddress). Booting images with
kernels 5.15 and later can break depending on the alignment on the DTB
within the FIT image.
Compared with the patch applied to master, this compiles the loader at
the changed offset used in OpenWrt master. This is required, as U-Boot
loads the uImage at the offset the loader is currently compiled for.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
eec18118d02fa5d095cb4035c42187e487d0e68c)
Kevin Jilissen [Sat, 4 May 2024 14:12:20 +0000 (16:12 +0200)]
realtek: Trap LLDP packets to the CPU
We should setup the registers for trapping LLDP packets to the CPU.
Currently, these packets are forwarded to all ports which is not desired
behaviour.
Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
(cherry picked from commit
5a5c52085a5bd0b1b8bc629f3586c7a93dcb4460)
Kevin Jilissen [Sat, 4 May 2024 14:11:00 +0000 (16:11 +0200)]
realtek: Change LLTP register to LLDP
These registers control the handling of Link Layer Discovery Protocol
(LLDP) packets. This seems to be a typo in the naming.
Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
(cherry picked from commit
81ab9ef2d166f9914a33d54d4dfd00429511ccb2)
Felix Fietkau [Mon, 18 Dec 2023 17:54:55 +0000 (18:54 +0100)]
mt76: update to Git HEAD (2023-12-18)
bebd9cffc2ae wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
1a57d758f229a1e8d9085cd4775ebe7e1ec5d9b2)
[rmilecki: it's a no-change for 23.05 as we had that fix backported]
Felix Fietkau [Mon, 11 Dec 2023 12:15:09 +0000 (13:15 +0100)]
mt76: update to Git HEAD (2023-12-11)
f63f87cd5b45 wifi: mt76: mt7996: fix shift overflow warning on 32 bit systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
da7b0351fce5dd59b79ea78d34c90c66b8bd6f6e)
[rmilecki: it's a no-change for 23.05 as we had that fix backported]
Rodrigo Balerdi [Fri, 10 May 2024 00:15:47 +0000 (21:15 -0300)]
ipq40xx: whw03v2: change LED color for 'running' state to blue
Change the RGB indicator LED color for the running state from green to
blue. There are various reasons for this change:
- In stock firmware, green means internet connection is up, red means it
is down, and blue means indeterminate. To track stock behavior as
closely as possible, OpenWrt should indicate blue by default.
- In the current 23.x OpenWrt releases for this router, the led glows
blue all the time -not green- because the bootloader sets it blue
and there is an OpenWrt bug that makes it unable to control the LED.
The bug is fixed in master, so without this commit there would be an
unexpected change of behavior for this device in the next release.
- The ports other closely related Linksys devices (such as EA8300 and
MR8300) get this right and use blue for the running state.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
(cherry picked from commit
c2f52e42b1e9f736edd6e4545ebe3435db6605ee)
Link: https://github.com/openwrt/openwrt/pull/15438
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rodrigo Balerdi [Fri, 10 May 2024 00:11:09 +0000 (21:11 -0300)]
ipq40xx: whw03v2: fix handling of RGB LED
The RGB LED should glow green in the 'running' state, but it
was glowing cyan because the blue component defaulted to 'on'.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
(cherry picked from commit
fc62d66c20b9e9f52ed787d2079baab06108b959)
Link: https://github.com/openwrt/openwrt/pull/15438
Signed-off-by: Robert Marko <robimarko@gmail.com>
Felix Fietkau [Mon, 29 Apr 2024 16:58:41 +0000 (18:58 +0200)]
mt76: update to Git HEAD (2023-12-08)
890ae4d717f1 wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
fcc2f3d82bc9 wifi: mt76: fix lock dependency problem for wed_lock
77cc14596202 wifi: mt76: mt792x: move mt7921_skb_add_usb_sdio_hdr in mt792x module
bc85355885d1 wifi: mt76: mt792x: move some common usb code in mt792x module
c27f01c4c834 wifi: mt76: mt7996: get tx_retries and tx_failed from txfree
30aba4c18307 wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic
119bebff244b wifi: mt76: mt7996: enable PPDU-TxS to host
a4005e0e83e7 wifi: mt76: mt7996: remove periodic MPDU TXS request
d6cc20bf5913 wifi: mt76: reduce spin_lock_bh held up in mt76_dma_rx_cleanup
5d94251d641c wifi: mt76: mt7921: move connac nic capability handling to mt7921
266341b5019d wifi: mt76: mt7921: enable set txpower for UNII-4
581449ac5274 wifi: mt76: mt7921: add 6GHz power type support for clc
9bfd669e9477 wifi: mt76: mt7921: get regulatory information from the clc event
4a0f839da0f1 wifi: mt76: mt7921: update the channel usage when the regd domain changed
f4df423d3d56 wifi: mt76: add ability to explicitly forbid LED registration with DT
54d369e79972 wifi: mt76: mt7921: support 5.9/6GHz channel config in acpi
b39b6cba220f wifi: mt76: mt7996: fix uninitialized variable in parsing txfree
77194e652885 wifi: mt76: fix typo in mt76_get_of_eeprom_from_nvmem function
c37738fc9097 wifi: mt76: limit support of precal loading for mt7915 to MTD only
d6e8aa634a19 wifi: mt76: make mt76_get_of_eeprom static again
d1c671a90eba wifi: mt76: permit to use alternative cell name to eeprom NVMEM load
5539001fe4e3 wifi: mt76: permit to load precal from NVMEM cell for mt7915
48d413380685 wifi: mt76: Remove unnecessary (void*) conversions
ea2814289147 wifi: mt76: mmio: move mt76_mmio_wed_{init,release}_rx_buf in common code
9fb0277d7ee8 wifi: mt76: move mt76_mmio_wed_offload_{enable,disable} in common code
4b47145ecf44 wifi: mt76: move mt76_net_setup_tc in common code
d798d5d6f770 wifi: mt76: introduce mt76_queue_is_wed_tx_free utility routine
48b0cedbf83f wifi: mt76: introduce wed pointer in mt76_queue
c550204e347d wifi: mt76: increase MT_QFLAG_WED_TYPE size
2e7f30f22cfd wifi: mt76: mt7996: add wed tx support
ec8765a02fc8 wifi: mt76: dma: introduce __mt76_dma_queue_reset utility routine
a469aaac9784 wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signature
abca260a15c4 wifi: mt76: mt7996: add wed rx support
be2e74c0c495 wifi: mt76: move wed reset common code in mt76 module
7f17e164fbb4 wifi: mt76: mt7996: add wed reset support
0f89bf58efda wifi: mt76: mt7996: add wed rro delete session garbage collector
a58b75f863ca wifi: mt76: mt7915: fallback to non-wed mode if platform_get_resource fails in mt7915_mmio_wed_init()
36d2ddd94eeb wifi: mt76: mt7996: add support for variants with auxiliary RX path
cec7720c9341 wifi: mt76: mt7996: add TX statistics for EHT mode in debugfs
9852093062e8 wifi: mt76: connac: add thermal protection support for mt7996
955540a4df74 wifi: mt76: mt7996: add thermal sensor device support
af41374a3b8e wifi: mt76: connac: add beacon duplicate TX mode support for mt7996
3c98d7b7fa23 wifi: mt76: mt7996: fix the size of struct bss_rate_tlv
ee2169c00539 wifi: mt76: mt7996: adjust WFDMA settings to improve performance
0aead5de68a7 wifi: mt76: connac: set fixed_bw bit in TX descriptor for fixed rate frames
ab5580ff5a4f wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGED
eed234afed7e wifi: mt76: mt7996: align the format of fixed rate command
d9a855285b95 wifi: mt76: mt7996: fix rate usage of inband discovery frames
47799aefe263 wifi: mt76: change txpower init to per-phy
264e1ecfe1b4 wifi: mt76: mt7996: add txpower setting support
c7b243b127eb wifi: mt76: use chainmask for power delta calculation
05f433900a02 wifi: mt76: mt7996: switch to mcu command for TX GI report
ae963198e605 wifi: mt76: mt7996: fix alignment of sta info event
d0d2e03591d6 wifi: mt76: mt7996: rework ampdu params setting
e87f4efc7638 wifi: mt76: connac: add beacon protection support for mt7996
0dfcc53a8e5d wifi: mt76: connac: fix EHT phy mode check
30c54a53bf8b wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981
17297c97b737 wifi: mt76: mt7915: also MT7981 is 3T3R but nss2 on 5 GHz band
eeb48c081034 wifi: mt76: mt7996: fix mt7996_mcu_all_sta_info_event struct packing
b74ad922659c wifi: mt76: mt7996: introduce mt7996_band_valid()
51cb541c1e53 wifi: mt76: connac: add firmware support for mt7992
c0eda4d96ec8 wifi: mt76: mt7996: add DMA support for mt7992
f12471968a53 wifi: mt76: mt7996: rework register offsets for mt7992
8d11dae73eb8 wifi: mt76: mt7996: support mt7992 eeprom loading
6c2b2c37abd7 wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992
df1d3b3c67e5 wifi: mt76: connac: add new definition of tx descriptor
f997e759cea5 wifi: mt76: mt7996: add PCI IDs for mt7992
94e3632e4e93 wifi: mt76: mt7925: remove iftype from mt7925_init_eht_caps signature
9c7b98c03173 net: ethernet: mtk_wed: rename mtk_rxbm_desc in mtk_wed_bm_desc
4423b4eb69fb wifi: mt76: mt7996: fix endianness in mt7996_mcu_wed_rro_event
b97d899a7907 wifi: mt76: mt7921: fix kernel panic by accessing invalid 6GHz channel info
9ef06028d4fe wifi: mt76: mt7921s: fix workqueue problem causes STA association fail
95c14207d2a9 wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM
dbea5151412b wifi: mt76: mt7921: reduce the size of MCU firmware download Rx queue
a84a355d2e0a wifi: mt76: mt7921: fix country count limitation for CLC
c498f27ad075 wifi: mt76: mt7921: fix CLC command timeout when suspend/resume
3098d968abe4 wifi: mt76: mt7921: fix wrong 6Ghz power type
7730fc91dd15 wifi: mt76: fix shift overflow warnings on 32 bit systems
f559adf1849c wifi: mt76: fix crash with WED rx support enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
8f782ed07dc23b64bb24f63ce31d939ee6afb5ad)
[rmilecki: add patches/fixes for regressions from this commit]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Mon, 29 Apr 2024 16:58:40 +0000 (18:58 +0200)]
mt76: update to the latest version
b5d13611d35e mt76: mt7915: fix monitor mode issues
bbbac7deee3d wifi: mt76: rename mt76_packet_id_init/flush to mt76_wcid_init/cleanup
f1e1e67d97d1 wifi: mt76: fix race condition related to checking tx queue fill status
b3f739a64e6b wifi: mt76: mt7996: add eht rx rate support
ca4917062f17 wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power
325a0c493199 wifi: mt76: mt7996: fill txd by host driver
cd371fcc98d4 mt76: mt7996: sync with upstream
d71f8d1b172b wifi: mt76: use atomic iface iteration for pre-TBTT work
8d5ea32d4895 wifi: mt76: remove unused error path in mt76_connac_tx_complete_skb
01860c02c505 wifi: mt76: add DMA mapping error check in mt76_alloc_txwi()
62ddb6d46a97 wifi: mt76: connac: introduce helper for mt7925 chipset
0837f37e998b wifi: mt76: mt792x: support mt7925 chip init
899ff378082b wifi: mt76: connac: export functions for mt7925
c3858b5bf347 wifi: mt76: connac: add eht support for phy mode config
5df6b26a9fc5 wifi: mt76: connac: add eht support for tx power
a8081345c636 wifi: mt76: connac: add data field in struct tlv
9b38aebecf78 wifi: mt76: connac: add more unified command IDs
84984e6dc87d wifi: mt76: connac: add more unified event IDs
6fe92398c9ce wifi: mt76: mt7996: set correct wcid in txp
2cfe2fb0bb80 wifi: mt76: mt7996: fix beamform mcu cmd configuration
e512241bb5bb wifi: mt76: mt7996: fix beamformee ss subfield in EHT PHY cap
719a98f832c7 wifi: mt76: mt7996: fix wmm queue mapping
9723562f2a5b wifi: mt76: mt7996: fix rx rate report for CBW320-2
1bb5a6a54943 wifi: mt76: mt7996: fix TWT command format
751b054891f6 wifi: mt76: mt7996: only set vif teardown cmds at remove interface
fea1e10c7741 wifi: mt76: mt7996: support more options for mt7996_set_bitrate_mask()
d497ee8aa2f5 wifi: mt76: mt7996: support per-band LED control
8ccc84111141 wifi: mt76: Use PTR_ERR_OR_ZERO() to simplify code
161f70217edf wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023)
7d25bfc3f0cc wifi: mt76: fix clang-specific fortify warnings
5971aa968401 wifi: mt76: connac: add MBSSID support for mt7996
5a47dd323be1 wifi: mt76: update beacon size limitation
d5b4b81dcc9e wifi: mt76: check sta rx control frame to multibss capability
af0e1f6dafb5 wifi: mt76: fix potential memory leak of beacon commands
65d91a833b01 wifi: mt76: get rid of false alamrs of tx emission issues
29411e52059f wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparison
4da62774038a wifi: mt76: check vif type before reporting cca and csa
4a85678fe089 wifi: mt76: mt7915: update mpdu density capability
791a45cffadf wifi: mt76: mt7915: fix beamforming availability check
08e1e6cb7d41 wifi: mt76: Drop unnecessary error check for debugfs_create_dir()
d1881b1b2bf6 wifi: mt76: move struct ieee80211_chanctx_conf up to struct mt76_vif
66d5694e1898 wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driver
9fc37b0ac546 wifi: mt76: mt7921: fix the wrong rate selected in fw for the chanctx driver
2afc7285f75d wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
ef8e2f66f563d0d1864be37075dacf3f13defdc7)
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Mieczyslaw Nalewaj [Tue, 7 May 2024 06:46:07 +0000 (08:46 +0200)]
ipq806x: swap lan leds for Meraki MR52
LAN Leds on Meraki MR52 are wrong and needs to be swapped to actually
reflect real ports (lan1<->lan2).
Fixes: #15388
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15410
[ wrap commit to 80 columns and improve commit title ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
bd6852185b7c7362fc5485afa961c686d9cd74b4)
Christian Marangi [Wed, 1 May 2024 13:42:57 +0000 (15:42 +0200)]
gengetopt: backport patch fixing support for c++17
Backport patch fixing support for c++17 that got merged upstream in
gengetopt.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
a8bfdf2ed4d930ca5a31b5c4bc7061ad5ef11ba3)
Rosen Penev [Sun, 11 Feb 2024 23:06:44 +0000 (15:06 -0800)]
lua: fix CVE-2014-5461
Patch taken from Debian.
Refresh patches
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit
78b0106f7d5093641f68d37c041a5863eb9dd9a0)
Hauke Mehrtens [Sat, 13 Apr 2024 17:22:41 +0000 (19:22 +0200)]
kernel: bump 5.15 to 5.15.155
Manual adapted the following patches:
generic/hack-5.15/221-module_exports.patch
bcm27xx/patches-5.15/950-0008-drm-vc4-hdmi-Use-a-mutex-to-prevent-concurrent-frame.patch
octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
9693ed6a9edb2ec9c9aa5edfa816dda3897cdfc4)
Josef Schlehofer [Sun, 28 Apr 2024 21:04:03 +0000 (23:04 +0200)]
toolchain/gdb: backport patch for macOS to fix invalid range
With the recent macOS update to Ventura, it looks like gdb could not be
compiled with clang16 and newer version, because it fails with:
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 15] for this enumeration type [-Wenum-constexpr-conversion]
integer_for_size<sizeof (T), static_cast<bool>(T (-1) < T (0))>::type
^
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 1] for this enumeration type [-Wenum-constexpr-conversion]
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 3] for this enumeration type [-Wenum-constexpr-conversion]
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 3] for this enumeration type [-Wenum-constexpr-conversion]
4 errors generated.
- Upstream bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=30423
- Backported upstream commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=
ae61525fcf456ab395d55c45492a106d1275873a
Fixes: https://github.com/openwrt/openwrt/issues/15314
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15315
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Mon, 29 Apr 2024 19:17:31 +0000 (21:17 +0200)]
procd: make mDNS TXT record parsing more solid
mDNS broadcast can't accept empty TXT record and would fail
registration.
Current procd_add_mdns_service checks only if the first passed arg is
empty but don't make any verification on the other args permittins
insertion of empty values in TXT record.
Example:
procd_add_mdns "blah" \
"tcp" "50" \
"1" \
"" \
"3"
Produce:
{ "blah_50": { "service": "_blah._tcp.local", "port": 50, "txt": [ "1", "", "3" ] } }
The middle empty TXT record should never be included as it's empty.
This can happen with scripts that make fragile parsing and include
variables even if they are empty.
Prevent this and make the TXT record more solid by checking every
provided TXT record and include only the non-empty ones.
The fixed JSON is the following:
{ "blah_50": { "service": "_blah._tcp.local", "port": 50, "txt": [ "1", "3" ] } }
Fixes: b0d9dcf84dd0 ("procd: update to latest git HEAD")
Reported-by: Paul Donald <newtwen@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15331
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
4b043047132de0b3d90619d538f103af6153fa5a)
Petr Štetiar [Mon, 30 Oct 2023 19:37:59 +0000 (19:37 +0000)]
Revert "uboot-mediatek: fix build on Mac OS X"
This reverts commit
997ff740dc44045390680eaa30b6566d40bca322.
78cbd5apick as it should be fixed in commit
78cbd5a57e11 ("tools: macOS:
types.h: fix missing unsigned types").
References: #13833
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit
f691830307b484ec611f173157739e56c78f336c)
Petr Štetiar [Mon, 30 Oct 2023 19:38:04 +0000 (19:38 +0000)]
Revert "uboot-sunxi: add missing type __u64"
This reverts commit
3cc57ba4627c9c7555f8ad86e4f78d86d8f9ddf0 as it
should be fixed in commit
78cbd5a57e11 ("tools: macOS: types.h: fix
missing unsigned types").
References: #13833
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit
bc47613cf0215743cde641f962386d59b57a332a)
Petr Štetiar [Mon, 30 Oct 2023 19:31:03 +0000 (19:31 +0000)]
tools: macOS: types.h: fix missing unsigned types
For some reason unsigned types were not added in commit
0a06fcf608dd
("build: fix kernel 5.4 on macos"), which led to bunch of hacks, like
commit
3cc57ba4627c ("uboot-sunxi: add missing type __u64") or
commit
997ff740dc44 ("uboot-mediatek: fix build on Mac OS X").
So lets add the missing unsigned types to workaround it in a bit more
maintainable way.
Fixes: #13833
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit
4a8961f1dfba33b1e9a38dd0ecb3a8b03c46edbb)
Petr Štetiar [Thu, 20 Jul 2023 06:41:44 +0000 (08:41 +0200)]
toolchain: kernel-headers: remove debugging env dump
Remove debugging `env` dump left over as build environments might
contain some sensitive information, which then might leak into the build
logs.
Fixes: 2105acbe2804 ("kernel-headers: fix compile error caused by wrong host include path when the toolchain is already built")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit
def41cf2bab825e46a31eb0a9ccf51288edfe27d)
Petr Štetiar [Thu, 20 Jul 2023 13:48:39 +0000 (15:48 +0200)]
toolchain: kernel-headers: fix check target for external Git trees
Executing following command currently fails:
$ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1
...
include/kernel-version.mk:11: *** Missing kernel version/hash file for . Please create include/kernel-. Stop.
So lets fix it by adding the necessary missing KERNEL_PATCHVER variable.
That additional kernel-build.mk include is needed to add another set of
missing variables:
$ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1
...
Makefile:115: *** ERROR: Unknown pack format for file tmp/dl/. Stop.
Fixes: 0765466a42f4 ("kernel: split kernel version to dedicated files")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit
6b7f1ffbad732c5e1818f9387c02dda109c2748b)
Rafał Miłecki [Fri, 19 Apr 2024 11:37:22 +0000 (13:37 +0200)]
mac80211: backport ieee80211_set_sband_iftype_data()
It's needed by some drivers, e.g. mt7925, see:
mt7925/main.c:264:9: error: implicit declaration of function '_ieee80211_set_sband_iftype_data' [-Werror=implicit-function-declaration]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 19 Apr 2024 11:37:21 +0000 (13:37 +0200)]
mac80211: backport ieee80211_vif_is_mld()
It's needed by some drivers, e.g. mt7925, see:
mt7925/mcu.c:2181:23: error: implicit declaration of function 'ieee80211_vif_is_mld' [-Werror=implicit-function-declaration]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Robert Marko [Fri, 29 Mar 2024 17:57:03 +0000 (18:57 +0100)]
tools: b43-tools: fix compilation with GCC14
GCC14 no longer treats integer types and pointer types as equivalent in
assignments (including implied assignments of function arguments and return
values), and instead fails the compilation with a type error.
So, as a workaround lets disable the newly introduced error
-Werror=int-conversion and just make it print a warning to enable compiling
with GCC14 as Fedora 40 now defaults to it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Nick Hainke [Wed, 24 Jan 2024 12:18:53 +0000 (13:18 +0100)]
tools/cpio: update to 2.15
Release Notes:
https://lists.gnu.org/archive/html/info-gnu/2024-01/msg00006.html
Fixes: #15228
Signed-off-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Zoltan HERPAI [Tue, 16 Apr 2024 22:42:56 +0000 (00:42 +0200)]
sunxi: fix network bringup on Olinuxino Micro boards
It's the A13-based Olinuxino Micro which has only wireless interfaces. The
A20-based board is a fully-fledged one which has an ethernet interface.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Georgi Valkov [Fri, 19 Apr 2024 07:19:00 +0000 (10:19 +0300)]
kernel: backport ipeth CDC NCM support
Fixes no communication with tethered iOS devices in CDC NCM mode.
Freshly booted iOS devices start in legacy mode, but are put into
NCM mode by the official Apple driver.
[1] https://github.com/torvalds/linux/commit/
a2d274c62e44b1995c170595db3865c6fe701226
Fixes: #12566
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
[ better reference fixed issue ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
680f8738d02a1876ae4cd11aacf9cd56e520fadf)
Christian Marangi [Thu, 18 Apr 2024 12:14:42 +0000 (14:14 +0200)]
bcm27xx: refresh kernel patches
Refresh kernel patches with make target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 18 Apr 2024 10:40:18 +0000 (12:40 +0200)]
netifd: packet-steering: silence error on applying queue mask
Some queues can't be tweaked and return -ENOENT if it's not multiqueue.
Silence any error from echo to produce a more clean bootlog.
Fixes: #12095
Suggested-by: Andris PE <neandris@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Mon, 8 Apr 2024 20:05:19 +0000 (22:05 +0200)]
config: fix CONFIG_GDB appearing in main menuconfig menu
I noticed that CONFIG_GDB was suddenly appearing in the main menuconfig
menu despite the fact that it should be visible only when TOOLCHAINOPTS
is selected and under a dedicated menu.
After some trial and error, it seems that this was caused by the recent
addition of GCC_USE_DEFAULT_VERSION, and after even more trial and error
it gets fixed as soon GCC_USE_DEFAULT_VERSION is placed after GCC_VERSION.
So, lets simply put GCC_USE_DEFAULT_VERSION after GCC_VERSION.
Fixes: 501ef81040ba ("config: select KERNEL_WERROR if building with default GCC version")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebased]
(cherry picked from commit
12b2cb2ec3f1366b65caa0dbbdd83846c1c88d4e)
Daniel Golle [Sun, 7 Apr 2024 18:50:04 +0000 (19:50 +0100)]
config: select KERNEL_WERROR if building with default GCC version
[ during cherry-pick GCC version was changed to default GCC 12 version ]
At the moment we have to manually follow the default GCC version
also in config/Config-kernel.in. This tends to be forgotten at GCC
version bumps (just happened when switching from version 12 to 13).
Instead, introduce a hidden Kconfig symbol which implies KERNEL_WERROR
in toolchain/gcc/Config.in where it is visible for developers changing
the default version.
Also remove the explicit default on BUILDBOT to avoid a circular
dependency and also because buildbots anyway implicitly always select
the default GCC version.
Reference: https://github.com/openwrt/openwrt/pull/15064
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [GCC 12 default]
(cherry picked from commit
501ef81040baa2ee31de6dd9f75d619de0e4c9bc)
Petr Štetiar [Wed, 24 May 2023 07:46:45 +0000 (09:46 +0200)]
kernel: introduce KERNEL_WERROR config option
In commit
b2d1eb717b65 ("generic: 5.15: enable Werror by default for
kernel compile") CONFIG_WERROR=y was enabled and all warnings/errors
reported with GCC 12 were fixed.
Keeping this in sync with past/future GCC versions is going to be uphill
battle, so lets introduce new KERNEL_WERROR config option, enable it by
default only for tested/known working combinations and on buildbots.
References: #12687
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit
ce8c639a6c539534be14a540e7c3e9933d3a34ef)
Rodrigo Balerdi [Tue, 16 Apr 2024 20:47:20 +0000 (17:47 -0300)]
ipq40xx: whw03v2: enable additional 5 GHz channels
This device supports channel ranges 36-64 and 100-165, just like
others based on the same reference design, but its current DTS is
unnecessarily restricting these ranges to 36-48 and 149-165.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
(cherry picked from commit
1c32cee348f54e9f64b5928ee1a1efe491eec137)
CheWei Chien [Mon, 19 Feb 2024 01:21:53 +0000 (09:21 +0800)]
ipq807x: prpl-haze: enable LED driver on device tree
Enable LED driver LP5562 on HAZE device tree and include its kernel
module package on default package for HAZE.
Signed-off-by: CheWei Chien <chewei.chien@wnc.com.tw>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [commit facelift]
(cherry picked from commit
fb45194305e6bf9b58f610c1528769320879c749)
CheWei Chien [Thu, 4 Jan 2024 05:28:40 +0000 (13:28 +0800)]
kernel: add kmod-leds-lp5562 and kmod-leds-lp55xx-common
Add kernel module for lp5562 LED driver.
The kmod-leds-lp5562 depends on kmod-leds-lp55xx-common.
Signed-off-by: CheWei Chien <chewei.chien@wnc.com.tw>
(cherry picked from commit
b33fa6ac9065028046016ea631f6be0926d7abd0)
Florian Eckert [Wed, 19 Jul 2023 09:54:25 +0000 (11:54 +0200)]
.gitignore: ignore link if target is included from feed
If an out of tree target is included via a feed, then there is a link with
the name 'feed' in the target directory. Do not show this link in git.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit
13e7a2d19f4545170a8deaab03411bc37182f7c4)
Cedric DOURLENT [Fri, 1 Mar 2024 15:42:34 +0000 (16:42 +0100)]
build: fix kernel component in CycloneDX SBOM
As stated in the cycloneDX documentation, the field "type" is mandatory for all components.
More details here (https://cyclonedx.org/docs/1.5/json/#components_items_type)
Signed-off-by: Cedric DOURLENT <cedric.dourlent@softathome.com>
(cherry picked from commit
84331215e57090a9cdae4af75af2539c39cd7de7)
Daniel Golle [Tue, 9 Jan 2024 19:54:51 +0000 (19:54 +0000)]
mvebu: puzzle-m90x: wipe rootfs_data on sysupgrade
The sysupgrade formware of the Puzzle series is a slightly strange
dual-boot approach while remaining compatible with Marvell's SDK
firmware upgrade binary format -- which happens to be a full-disk
image with GPT partition table. Hence that /lib/upgrade/emmc-puzzle.sh
script is like an exotic disease which results from those decisions,
and as we also want to somehow stay compatible with the IEI-World
stock firmware we got to use it in that same way (we are not
compatible with the QNAP-branded identical hardware device anyway).
Currently, on sysupgrade the result is that one ends up with the old
content of rootfs_data (a GPT partition on those devices) as nothing
ever wipes or in any way re-creates the filesystem there. As a simple
work-around, let's kill the filesystem on rootfs_data so fstools
re-formats it on the next boot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
d4e8653e1e9ec90404d12ea24fb0f8e507b337d5)
Robert Marko [Mon, 8 Apr 2024 15:52:22 +0000 (17:52 +0200)]
sdk: include lib/crtsavres.o for powerpc
Trying to link certain kernel modules like dahdi-linux when building with
the OpenWrt SDK will fail with:
openwrt-sdk-apm821xx-sata_gcc-13.2.0_musl.Linux-x86_64/staging_dir/toolchain-powerpc_464fp_gcc-13.2.0_musl/bin/powerpc-openwrt-linux-musl-ld: cannot find arch/powerpc/lib/crtsavres.o: No such file or directory
Previously this worked with the PowerPC SDK since we carried a hack that
was passing --save-restore-funcs to module LDFLAGS so the linker provided
the required functions automatically as without --save-restore-funcs it
doesnt do so automatically on relocatable links and as a sideffect did not
require the kernel provided crtsaves.o to link against.
Now that hack has been removed as upstream kernel now compiles crtsaves.o
by default so it can be linked against but its not included in the SDK.
So, lets include lib/crtsavres.o when SDK is generated for PowerPC.
Fixes: 1c28058710fd ("kernel: bump 5.15 to 5.15.148")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Felix Fietkau [Fri, 29 Mar 2024 21:21:51 +0000 (22:21 +0100)]
kernel: backport upstream mediatek WED changes
Reorder and update existing patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
6407ef8d2bcb4a0a6284de09cd77bd1868c1d6ea)
[rmilecki: rebase & fix mt76 compilation]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 1 Apr 2024 20:59:10 +0000 (22:59 +0200)]
mac80211: backport some upstream EHT patches
Those changes are needed by Wi-Fi 7 drivers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Richard Kunze [Wed, 20 Mar 2024 18:26:27 +0000 (19:26 +0100)]
realtek: support common GPIOs on D-Link DGS-1210-16
D-Link DGS-1210-16 hangs when rebooting and has no support for the reset
button.
Fix both by enabling the same GPIOs for reboot and the reset button as
already used for D-Link DGS-1210-20 and D-Link DGS-1210-28.
Signed-off-by: Richard Kunze <kunze@tivano.de>
(cherry picked from commit
92c21b2e18f0c53f45cca9731e131568cddcbbd5)
Marco von Rosenberg [Sun, 31 Mar 2024 15:07:39 +0000 (17:07 +0200)]
ath79: add support for Huawei AP5030DN
Huawei AP5030DN is a dual-band, dual-radio 802.11ac Wave 1 3x3 MIMO
enterprise access point with two Gigabit Ethernet ports and PoE
support.
Hardware highlights:
- CPU: QCA9550 SoC at 720MHz
- RAM: 256MB DDR2
- Flash: 32MB SPI-NOR
- Wi-Fi 2.4GHz: QCA9550-internal radio
- Wi-Fi 5GHz: QCA9880 PCIe WLAN SoC
- Ethernet 1: 10/100/1000 Mbps Ethernet through Broadcom
B50612E PHY
- Ethernet 2: 10/100/1000 Mbps Ethernet through Marvell
88E1510 PHY
- PoE: input through Ethernet 1 port
- Standalone 12V/2A power input
- Serial console externally available through RJ45 port
- External watchdog: SGM706 (1.6s timeout)
Serial console:
9600n8 (9600 baud, no stop bits, no parity, 8 data bits)
MAC addresses:
Each device has 32 consecutive MAC addresses allocated by
the vendor, which don't overlap between devices.
This was confirmed with multiple devices with consecutive
serial numbers.
The MAC address range starts with the address on the label.
To be able to distinguish between the interfaces,
the following MAC address scheme is used:
- eth0 = label MAC
- eth1 = label MAC + 1
- radio0 (Wi-Fi 5GHz) = label MAC + 2
- radio1 (Wi-Fi 2.4GHz) = label MAC + 3
Installation:
0. Connect some sort of RJ45-to-USB adapter to "Console" port of the AP
1. Power up the AP
2. At prompt "Press f or F to stop Auto-Boot in 3 seconds",
do what they say.
Log in with default admin password "admin@huawei.com".
3. Boot the OpenWrt initramfs from TFTP using the hidden script
"run ramboot". Replace IP address as needed:
> setenv serverip 192.168.1.10
> setenv ipaddr 192.168.1.1
> setenv rambootfile
openwrt-ath79-generic-huawei_ap5030dn-initramfs-kernel.bin
> saveenv
> run ramboot
4. Optional but recommended as the factory firmware cannot
be downloaded publicly:
Back up contents of "firmware" partition using the web interface or ssh:
$ ssh root@192.168.1.1 cat /dev/mtd11 > huawei_ap5030dn_fw_backup.bin
5. Run sysupgrade using sysupgrade image. OpenWrt
shall boot from flash afterwards.
Return to factory firmware (using firmware upgrade package downloaded from
non-public Huawei website):
1. Start a TFTP server in the directory where
the firmware upgrade package is located
2. Boot to u-boot as described above
3. Install firmware upgrade package and format the config partitions:
> update system FatAP5X30XN_SOMEVERSION.bin
> format_fs
Return to factory firmware (from previously created backup):
1. Copy over the firmware partition backup to /tmp,
for example using scp
2. Use sysupgrade with force to restore the backup:
sysupgrade -F huawei_ap5030dn_fw_backup.bin
3. Boot AP to U-Boot as described above
Quirks and known issues
-----------------------
- On initial power-up, the Huawei-modified bootloader suspends both
ethernet PHYs (it sets the "Power Down" bit in the MII control
register). Unfortunately, at the time of the initial port, the kernel
driver for the
B50612E/BCM54612E PHY behind eth0 doesn't have a resume
callback defined which would clear this bit. This makes the PHY unusable
since it remains suspended forever. This is why the backported kernel
patches in this commit are required which add this callback and for
completeness also a suspend callback.
- The stock firmware has a semi dual boot concept where the primary
kernel uses a squashfs as root partition and the secondary kernel uses
an initramfs. This dual boot concept is circumvented on purpose to gain
more flash space and since the stock firmware's flash layout isn't
compatible with mtdsplit.
- The external watchdog's timeout of 1.6s is very hard to satisfy
during bootup. This is why the GPIO15 pin connected to the watchdog input
is configured directly in the LZMA loader to output the CPU_CLK/4 signal
which keeps the watchdog happy until the wdt-gpio kernel driver takes
over. Because it would also take too long to read the whole kernel image
from flash, the uImage header only includes the loader which then reads
the kernel image from flash after GPIO15 is configured.
Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
[fixed 6.6 backport patch naming]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
06cdc07f8cc703ef7dcb3e7b329b9abff0806a6e)
Hauke Mehrtens [Fri, 29 Mar 2024 22:15:41 +0000 (23:15 +0100)]
kernel: bump 5.15 to 5.15.153
Removed because they are upstream:
generic/backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
c5c0760adc260d55265c086b9efb350ea6dda38b
generic/pending-5.15/735-net-mediatek-mtk_eth_soc-release-MAC_MCR_FORCE_LINK-.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
448cc8b5f743985f6d1d98aa4efb386fef4c3bf2
generic/pending-5.15/736-net-ethernet-mtk_eth_soc-fix-PPE-hanging-issue.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
9fcadd125044007351905d40c405fadc2d3bb6d6
Add new configuration symbols for tegra target.
Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
fb2c6e9d4da8753b91f79f4ab2d00c0fd8efa038)
Allen Zhao [Sat, 9 Mar 2024 02:44:58 +0000 (10:44 +0800)]
mediatek: filogic: add Unielec U7981-01 support
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 8GB eMMC or 128 MB SPI-NAND
RAM: 256MB
Ethernet: 5x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset
USB: M.2(B-key) for 4G/5G Module
Power: DC 12V 1A
UART: 3.3v, 115200n8
--------------------------
| Layout |
| ----------------- |
| 4 | VCC RX TX GND | <= |
| ----------------- |
--------------------------
The U-boot menu will automatically appear at startup, and then select
the required options through UP/DOWN Key.
NAND Flash and eMMC Flash instructions:
1. Set your computers IP adress to 192.168.1.2.
2. Run a TFTP server providing the sysupgrade.bin image.
3. Power on the router, into the U-Boot menu.
4. Select "2. Upgrade firmware"
5. Update sysupgrade.bin file name, input server IP and input device
IP (if they deviate from the defaults)
6. Wait for automatic startup after burning
Signed-off-by: Allen Zhao <allenzhao@unielecinc.com>
(cherry picked from commit
640b0b79ff05c42991e99a49ed81efb3fac25045)
Tianling Shen [Mon, 25 Mar 2024 18:25:42 +0000 (02:25 +0800)]
rockchip: remove redundant 'console' parameter from boot script
ttyS2 is the default console used for all rockchip boards.
The redundant 'console=tty1' parameter now breaks the console due to
recent procd update.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit
163c3d0bde28664058656ce1c2bd97f80e4dbe2d)
Tianling Shen [Mon, 25 Mar 2024 16:40:37 +0000 (00:40 +0800)]
rockchip: remove 'swiotlb' parameter from boot script
We have hardware IOMMU support and this is totally unnecessary.
The given value is also unreasonable, it's too small and causes
kernel panic in some cases:
[ 5706.856473] sdhci-dwcmshc
fe310000.mmc: swiotlb buffer is full (sz: 28672 bytes), total 512 (slots), used 498 (slots)
[ 5706.864451] sdhci-dwcmshc
fe310000.mmc: swiotlb buffer is full (sz: 65536 bytes), total 512 (slots), used 464 (slots)
This parameter seems to be added by mistake, so remove it.
Fixes: e35c7ab51fd1 ("rockchip: merge bootscript")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit
50e6c8ae8df55532fb70c281bd238b9b1cf1fdaf)
Felix Fietkau [Sun, 31 Mar 2024 17:57:03 +0000 (19:57 +0200)]
unetd: update to Git HEAD (2024-03-31)
52144f723bec pex: after receiving data update req, notify peer of local address/port
29aacb9386e0 pex: track indirect hosts (reachable via gateway) as peers without adding them to wg
48049524d4fc pex: do not send peer notifications for hosts with a gateway
12ac684ee22a pex: do not query for hosts with a gateway
203c88857354 pex: fix endian issues on config transfer
a29d45c71bca network: fix endian issue in converting port to network id
cbbe9d337a17 unet-cli: emit id by default
806457664ab6 unet-cli: strip initial newline in usage message
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
a112ed4126c258a63698774b1e600584c1ccd5a8)
Hauke Mehrtens [Tue, 26 Mar 2024 00:18:15 +0000 (01:18 +0100)]
kernel: bump 5.15 to 5.15.152
Removed because it is upstream:
generic/backport-5.15/081-v5.17-regmap-allow-to-define-reg_update_bits-for-no-bus.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=
fbddd48f1456db32b675fad95a902de38345902a
Manual changes needed:
bcm27xx/patches-5.15/950-0470-sound-usb-add-device-quirks-for-A4Tech-FHD-1080p-web.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
2ec025d5547182da07bdd8299d2e97d05f695537)
Hauke Mehrtens [Mon, 25 Mar 2024 22:54:57 +0000 (23:54 +0100)]
kernel: bump 5.15 to 5.15.151
No manual changes needed.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
030757112413760bdb5941776d6ca35d3c7e0833)
Sander van Deijck [Tue, 12 Mar 2024 00:54:38 +0000 (01:54 +0100)]
kirkwood: add ix4-200d support to uboot-envtools
This adds support for the Iomega ix4-200d device in uboot-envtools.
Signed-off-by: Sander van Deijck <sander@vandeijck.com>
(cherry picked from commit
2cfe86d383c9eb74b6d37d8e33bb726f7d6cbb8a)
Hauke Mehrtens [Fri, 22 Mar 2024 22:26:12 +0000 (23:26 +0100)]
OpenWrt v23.05.3: revert to branch defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 22 Mar 2024 22:26:03 +0000 (23:26 +0100)]
OpenWrt v23.05.3: adjust config defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 22 Mar 2024 22:09:42 +0000 (23:09 +0100)]
mt76: Fix PKG_MIRROR_HASH
Fix the PKG_MIRROR_HASH after the last upgrade.
Fixes: 5ef41b1f9159 ("mt76: update to latest HEAD")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
David Bauer [Fri, 16 Feb 2024 22:12:00 +0000 (23:12 +0100)]
mt76: update to latest HEAD
f1e1e67d wifi: mt76: fix race condition related to checking tx queue fill status
bbbac7de wifi: mt76: rename mt76_packet_id_init/flush to mt76_wcid_init/cleanup
b5d13611 mt76: mt7915: fix monitor mode issues
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Sun, 10 Mar 2024 23:14:33 +0000 (23:14 +0000)]
mediatek: mt7622: linksys-e8450: set driving strength for SPI-NAND
Set 12mA driving strength for SPI-NAND pins like the stock firmware's
bootloader does as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
45a2109353fa18701b65aefe2323ec06391da543)
Hauke Mehrtens [Mon, 18 Mar 2024 21:39:56 +0000 (22:39 +0100)]
dnsmasq: Backport 2 upstream patches
These two patches are fixing minor problems with DNSSEC found shortly
after the dnsmasq 2.90 release.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
28c87d7ecd142a31772572faac079b77163ceeca)
Robert Marko [Wed, 13 Mar 2024 11:47:31 +0000 (12:47 +0100)]
dnsmasq: reset PKG_RELEASE
dnsmasq was recently updated to 2.90, but PKG_RELEASE was not reset to 1.
Fixes: 838a27f64f56 ("dnsmasq: version 2.90")
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit
694e6477848eade21851ec27d90c173b373099fc)
Nathaniel Wesley Filardo [Sun, 18 Feb 2024 13:12:10 +0000 (13:12 +0000)]
dnsmasq: version 2.90
Bump to 2.90 to get upstream's fix for DNSSEC KeyTrap (CVE-2023-50387,
CVE-2023-50868) among many other goodies and fixes (notably, upstream
568fb024... fixes a UAF in cache_remove_uid that was routinely crashing
dnsmasq in my deployment).
Catch up our 200-ubus_dns.patch, too.
Signed-off-by: Nathaniel Wesley Filardo <nwfilardo@gmail.com>
(cherry picked from commit
838a27f64f56e75aae98a3ab2556856224d48d8b)
Sven Eckelmann [Sat, 18 Nov 2023 15:29:09 +0000 (16:29 +0100)]
dnsmasq: mark global ubus context as closed after fork
If the dnsmasq process forks to handle TCP connections, it closes the ubus
context. But instead of changing the daemon wide pointer to NULL, only the
local variable was adjusted - and this portion of the code was even dropped
(dead store) by some optimizing compilers.
It makes more sense to change the daemon->ubus pointer because various
functions are already checking it for NULL. It is also the behavior which
ubus_destroy() implements.
Fixes: d8b33dad0bb7 ("dnsmasq: add support for monitoring and modifying dns lookup results via ubus")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
(cherry picked from commit
711dcb77630e96e75413b5cdbe3ddb5432f394f6)
Rafał Miłecki [Wed, 17 Jan 2024 21:20:15 +0000 (22:20 +0100)]
mediatek: filogic: replace built-in Aquantia driver with module
Some Aquantia PHYs (e.g. AQR113C) require firmware to be uploaded by
host system. With built-in drivers this doesn't work in OpenWrt /
embeddded as filesystem isn't available during PHY probe. That results
in delays like:
[ 1.588068] Aquantia AQR113C mdio-bus:00: Falling back to sysfs fallback for: Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld
[ 64.526387] Aquantia AQR113C mdio-bus:00: failed to find FW file Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld (-110)
Switch to module to postpone PHY probe to init state.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
3bd79e6136a572b73536e9216cc199399fb33b30)
Daniel Golle [Sun, 17 Mar 2024 15:55:09 +0000 (15:55 +0000)]
mvebu: enable thermal zone polling for IEI Puzzle devices
Marvell's thermal sensors do not support interrupts, so we need to
poll them. Reading temperature every second should be enough to
control the fan.
While at it, also make sure fan speed is reduced again if temperature
goes down.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
fc177695e00e80afd30d20d29f6e915edc9e9eb9)
Christian Lamparter [Thu, 14 Mar 2024 06:13:37 +0000 (07:13 +0100)]
firmware: intel-microcode: update to
20240312
Debian changelog:
intel-microcode (3.
20240312.1) unstable; urgency=medium
* New upstream microcode datafile
20240312 (closes: #
1066108)
- Mitigations for INTEL-SA-INTEL-SA-00972 (CVE-2023-39368):
Protection mechanism failure of bus lock regulator for some Intel
Processors may allow an unauthenticated user to potentially enable
denial of service via network access.
- Mitigations for INTEL-SA-INTEL-SA-00982 (CVE-2023-38575):
Non-transparent sharing of return predictor targets between contexts in
some Intel Processors may allow an authorized user to potentially
enable information disclosure via local access. Affects SGX as well.
- Mitigations for INTEL-SA-INTEL-SA-00898 (CVE-2023-28746), aka RFDS:
Information exposure through microarchitectural state after transient
execution from some register files for some Intel Atom Processors and
E-cores of Intel Core Processors may allow an authenticated user to
potentially enable information disclosure via local access. Enhances
VERW instruction to clear stale register buffers. Affects SGX as well.
Requires kernel update to be effective.
- Mitigations for INTEL-SA-INTEL-SA-00960 (CVE-2023-22655), aka TECRA:
Protection mechanism failure in some 3rd and 4th Generation Intel Xeon
Processors when using Intel SGX or Intel TDX may allow a privileged
user to potentially enable escalation of privilege via local access.
NOTE: effective only when loaded by firmware. Allows SMM firmware to
attack SGX/TDX.
- Mitigations for INTEL-SA-INTEL-SA-01045 (CVE-2023-43490):
Incorrect calculation in microcode keying mechanism for some Intel
Xeon D Processors with Intel SGX may allow a privileged user to
potentially enable information disclosure via local access.
* Fixes for other unspecified functional issues on many processors
* Updated microcodes:
sig 0x00050653, pf_mask 0x97, 2023-07-28, rev 0x1000191, size 36864
sig 0x00050656, pf_mask 0xbf, 2023-07-28, rev 0x4003605, size 38912
sig 0x00050657, pf_mask 0xbf, 2023-07-28, rev 0x5003605, size 37888
sig 0x0005065b, pf_mask 0xbf, 2023-08-03, rev 0x7002802, size 30720
sig 0x00050665, pf_mask 0x10, 2023-08-03, rev 0xe000015, size 23552
sig 0x000506f1, pf_mask 0x01, 2023-10-05, rev 0x003e, size 11264
sig 0x000606a6, pf_mask 0x87, 2023-09-14, rev 0xd0003d1, size 307200
sig 0x000606c1, pf_mask 0x10, 2023-12-05, rev 0x1000290, size 299008
sig 0x000706a1, pf_mask 0x01, 2023-08-25, rev 0x0040, size 76800
sig 0x000706a8, pf_mask 0x01, 2023-08-25, rev 0x0024, size 76800
sig 0x000706e5, pf_mask 0x80, 2023-09-14, rev 0x00c4, size 114688
sig 0x000806c1, pf_mask 0x80, 2023-09-13, rev 0x00b6, size 111616
sig 0x000806c2, pf_mask 0xc2, 2023-09-13, rev 0x0036, size 98304
sig 0x000806d1, pf_mask 0xc2, 2023-09-13, rev 0x0050, size 104448
sig 0x000806ec, pf_mask 0x94, 2023-07-16, rev 0x00fa, size 106496
sig 0x000806f8, pf_mask 0x87, 2024-01-03, rev 0x2b000590, size 579584
sig 0x000806f7, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x000806f6, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x000806f5, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x000806f4, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x00090661, pf_mask 0x01, 2023-09-26, rev 0x0019, size 20480
sig 0x00090672, pf_mask 0x07, 2023-09-19, rev 0x0034, size 224256
sig 0x00090675, pf_mask 0x07, 2023-09-19, rev 0x0034
sig 0x000b06f2, pf_mask 0x07, 2023-09-19, rev 0x0034
sig 0x000b06f5, pf_mask 0x07, 2023-09-19, rev 0x0034
sig 0x000906a3, pf_mask 0x80, 2023-09-19, rev 0x0432, size 222208
sig 0x000906a4, pf_mask 0x80, 2023-09-19, rev 0x0432
sig 0x000906c0, pf_mask 0x01, 2023-09-26, rev 0x24000026, size 20480
sig 0x000906e9, pf_mask 0x2a, 2023-09-28, rev 0x00f8, size 108544
sig 0x000906ea, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 105472
sig 0x000906ec, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 106496
sig 0x000906ed, pf_mask 0x22, 2023-07-27, rev 0x00fc, size 106496
sig 0x000a0652, pf_mask 0x20, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0653, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0655, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0660, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0661, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 96256
sig 0x000a0671, pf_mask 0x02, 2023-09-14, rev 0x005e, size 108544
sig 0x000b0671, pf_mask 0x32, 2023-12-14, rev 0x0122, size 215040
sig 0x000b06a2, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160
sig 0x000b06a3, pf_mask 0xe0, 2023-12-07, rev 0x4121
sig 0x000b06e0, pf_mask 0x11, 2023-09-25, rev 0x0015, size 138240
* New microcodes:
sig 0x000a06a4, pf_mask 0xe6, 2024-01-03, rev 0x001c, size 136192
sig 0x000b06a8, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160
sig 0x000c06f2, pf_mask 0x87, 2023-11-20, rev 0x21000200, size 549888
sig 0x000c06f1, pf_mask 0x87, 2023-11-20, rev 0x21000200
* source: update symlinks to reflect id of the latest release,
20240312
* changelog, debian/changelog: fix typos
-- Henrique de Moraes Holschuh <hmh@debian.org> Tue, 12 Mar 2024 20:28:17 -0300
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit
7b911a9c492f3db50fe97311b8cee9850acf03ad)
Christian Lamparter [Fri, 8 Mar 2024 20:16:44 +0000 (21:16 +0100)]
firmware: intel-microcode: update to
20231114
Debian changelog:
intel-microcode (3.
20231114.1) unstable; urgency=medium
* New upstream microcode datafile
20231114 (closes: #
1055962)
Mitigations for "reptar", INTEL-SA-00950 (CVE-2023-23583)
Sequence of processor instructions leads to unexpected behavior for some
Intel(R) Processors, may allow an authenticated user to potentially enable
escalation of privilege and/or information disclosure and/or denial of
service via local access.
Note: "retvar" on 4th gen Xeon Scalable (sig 0x806f8 pfm 0x87), 12th gen
Core mobile (sig 0x906a4 pfm 0x80), 13th gen Core desktop (sig 0xb0671 pfm
0x01) were already mitigated by a previous microcode update.
* Fixes for unspecified functional issues
* Updated microcodes:
sig 0x000606a6, pf_mask 0x87, 2023-09-01, rev 0xd0003b9, size 299008
sig 0x000606c1, pf_mask 0x10, 2023-09-08, rev 0x1000268, size 290816
sig 0x000706e5, pf_mask 0x80, 2023-09-03, rev 0x00c2, size 113664
sig 0x000806c1, pf_mask 0x80, 2023-09-07, rev 0x00b4, size 111616
sig 0x000806c2, pf_mask 0xc2, 2023-09-07, rev 0x0034, size 98304
sig 0x000806d1, pf_mask 0xc2, 2023-09-07, rev 0x004e, size 104448
sig 0x000806f8, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0, size 572416
sig 0x000806f8, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
sig 0x000806f7, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
sig 0x000806f6, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
sig 0x000806f5, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
sig 0x000806f4, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
sig 0x000806f8, pf_mask 0x10, 2023-06-26, rev 0x2c000290, size 605184
sig 0x000806f8, pf_mask 0x10, 2023-06-26, rev 0x2c000290
sig 0x000806f6, pf_mask 0x10, 2023-06-26, rev 0x2c000290
sig 0x000806f5, pf_mask 0x10, 2023-06-26, rev 0x2c000290
sig 0x000806f4, pf_mask 0x10, 2023-06-26, rev 0x2c000290
sig 0x00090672, pf_mask 0x07, 2023-06-07, rev 0x0032, size 222208
sig 0x00090672, pf_mask 0x07, 2023-06-07, rev 0x0032
sig 0x00090675, pf_mask 0x07, 2023-06-07, rev 0x0032
sig 0x000b06f2, pf_mask 0x07, 2023-06-07, rev 0x0032
sig 0x000b06f5, pf_mask 0x07, 2023-06-07, rev 0x0032
sig 0x000906a3, pf_mask 0x80, 2023-06-07, rev 0x0430, size 220160
sig 0x000906a3, pf_mask 0x80, 2023-06-07, rev 0x0430
sig 0x000906a4, pf_mask 0x80, 2023-06-07, rev 0x0430
sig 0x000906a4, pf_mask 0x40, 2023-05-05, rev 0x0005, size 117760
sig 0x000a0671, pf_mask 0x02, 2023-09-03, rev 0x005d, size 104448
sig 0x000b0671, pf_mask 0x32, 2023-08-29, rev 0x011d, size 210944
sig 0x000b06a2, pf_mask 0xe0, 2023-08-30, rev 0x411c, size 216064
sig 0x000b06a2, pf_mask 0xe0, 2023-08-30, rev 0x411c
sig 0x000b06a3, pf_mask 0xe0, 2023-08-30, rev 0x411c
sig 0x000b06e0, pf_mask 0x11, 2023-06-26, rev 0x0012, size 136192
* Updated 2023-08-08 changelog entry:
Mitigations for "retvar" on a few processors, refer to the 2023-11-14
entry for details. This information was disclosed in 2023-11-14.
* source: update symlinks to reflect id of the latest release,
20231114
-- Henrique de Moraes Holschuh <hmh@debian.org> Thu, 16 Nov 2023 08:09:43 -0300
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit
7241a91c948066e9062729a043944fd313826753)
Konstantin Demin [Tue, 9 Jan 2024 00:40:01 +0000 (03:40 +0300)]
dropbear: cherry-pick upstream patches
critical fixes:
- libtommath: possible integer overflow (CVE-2023-36328)
- implement Strict KEX mode (CVE-2023-48795)
various fixes:
- fix DROPBEAR_DSS and DROPBEAR_RSA config options
- y2038 issues
- remove SO_LINGER socket option
- make banner reading failure non-fatal
- fix "noremotetcp" behavior
- don't try to shutdown a pty
- fix test for multiuser kernels
adds new features:
- option to bind to interface
- allow inetd with non-syslog
- ignore unsupported command line options with dropbearkey
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
(cherry picked from commit
b5cde260487eae86db1661a53e5e5e0823936aab)
[Only add the patches fixing security problems]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Patryk Kowalczyk [Tue, 2 Jan 2024 09:37:47 +0000 (10:37 +0100)]
mediatek: filogic: Asus TUF AX6000 fix inverted LED for 2.5Gb LAN port
Router Asus TUF AX6000 have second MaxLinear GPY211 PHY controller for 2.5Gb LAN port.
The 5'th LAN port have inverted status of the LED.
Based on the commit from main branch
90fbec8 we could set proper status of the LED.
Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
(cherry picked from commit
b22539b5fef9572f9ce2bedcd01d083c918d82f1)
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Daniel Golle [Sun, 10 Dec 2023 01:15:36 +0000 (01:15 +0000)]
kernel: hack: support inverted LEDs on MaxLinear GPY211 PHY
Add downstream DT property to setup the PHY LEDs of the MaxLinear
GPY211 PHY in such way that the VDD of the LED is driven by the SoC
pin rather than the GND (which is the default).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
90fbec89be263a3838558c5b674f3c4072cc2f1d)
[removed patches for kernel 6.1]
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Patryk Kowalczyk [Thu, 2 Nov 2023 08:46:36 +0000 (09:46 +0100)]
filogic: fix wifi eeprom filename for tuf-ax6000 The router use mt7986_eeprom_mt7976_dual.bin
Fixes: d522ccecb2 ("filogic: add support for ASUS TUF AX6000")
Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
(cherry picked from commit
0c3f4bd85ee6067588a81843a403850ab0082270)
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Mikhail Zhilkin [Sat, 2 Mar 2024 19:58:40 +0000 (19:58 +0000)]
ramips: add support for Z-ROUTER ZR-2660
This commit adds support for Z-ROUTER ZR-2660 (also known as Routerich
AX1800) wireless WiFi 6 router.
Specification
-------------
- SoC : MediaTek MT7621AT, MIPS, 880 MHz
- RAM : 256 MiB
- Flash : NAND 128 MiB (AMD/Spansion S34ML01G2)
- WLAN :
- 2.4 GHz : MediaTek MT7905D/MT7975 (14c3:7916), b/g/n/ax, MIMO 2x2
- 5 GHz : MediaTek MT7915E (14c3:7915), a/n/ac/ax, MIMO 2x2
- Ethernet : 10/100/1000 Mbps x4 (1x WAN, 3x LAN)
- USB : 1x 2.0
- UART : 3.3V, 115200n8, pins are silkscreened on the pcb
- Buttons : 1x Reset
- LEDs : 1x WiFi 2.4 GHz (green)
1x WiFi 5 GHz (green)
1x LAN (green)
1x WAN (green)
1x WAN no-internet (red)
- Power : 12 VDC, 1 A
Installation
------------
1. Run tftp server on your PC (IP: 192.168.2.2) and put OpenWrt initramfs
image (initramfs.bin) to the tftp root dir
2. Open the following link in the browser to enable telnet:
http://192.168.2.1/cgi-bin/telnet_ssh
3. Connect to the router (default IP: 192.168.2.1) using telnet shell
(credentials - user:admin)
4. Run the following commands in the telnet shell (this will install
OpenWrt initramfs image on nand flash):
cd /tmp
tftp -g -r initramfs.bin 192.168.2.2
mtd write initramfs.bin firmware
mtd erase firmware_backup
reboot
5. Copy OpenWrt sysupgrade image (sysupgrade.bin) to the /tmp dir of the
router
6. Connect to the router (IP: 192.168.1.1) using ssh shell and run
sysupgrade command:
sysupgrade -n /tmp/sysupgrade.bin
Return to stock
---------------
1. Copy stock firmware (stock.bin) to the /tmp dir of the router using scp
2. Run following command in the router shell:
cd /tmp
mtd write stock.bin firmware
reboot
Recovery
--------
Connect uart (pins are silkscreened on the pcb), interrupt boot process by
pressing any key, use u-boot menu to flash stock firmware image or OpenWrt
initramfs image.
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| LAN | 24:0f:5e:xx:xx:4c | label |
| WAN | 24:0f:5e:xx:xx:4d | label+1 |
| WLAN 2g | 24:0f:5e:xx:xx:4e | label+2 |
| WLAN 5g | 24:0f:5e:xx:xx:4f | label+3 |
+---------+-------------------+-----------+
The WLAN 2.4 MAC was found in 'factory', 0x4
The LAN MAC was found in 'factory', 0xfff4
The WAN MAC was found in 'factory', 0xfffa
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit
1d3d6ef8269aca7ee34fb6ddd1c11d3fe45e785b)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Daniel Golle [Wed, 13 Mar 2024 18:44:52 +0000 (18:44 +0000)]
generic: mtk_eth_soc: fix PPE hanging issue
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.
Without this patch, the PPE may experience a hang during the reboot test.
Reference: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/
b40da332dfe763932a82f9f62a4709457a15dd6c
Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
003b9ff61c081dd820764d4d0a83bb2514646576)
Daniel Golle [Wed, 13 Mar 2024 18:43:28 +0000 (18:43 +0000)]
generic: 5.15: mtk_eth_soc: backport fix for hang on link up
Backport commit
faa5f17fe2 ("kernel: mtk_eth_soc: release
MAC_MCR_FORCE_LINK only when MAC is up") to Linux 5.15 as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
33d6ba5045023ee05ca884dc162dbd9202d8698e)
Nicolò Veronese [Thu, 2 Nov 2023 18:53:08 +0000 (19:53 +0100)]
uboot-envtools: add support for Zyxel EX5601-T0 ubootmod
The ubootmod bootlaoder for EX5601-T0 uses two partitions
in ubi to store enviroment variables. so proper config
is needed.
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
(cherry picked from commit
2a0805fd3d0a0f57b60778973f341cee90cb5e49)
Valerio 'ftp21' Mancini [Sat, 26 Aug 2023 22:01:58 +0000 (00:01 +0200)]
uboot-mediatek: add initial Zyxel EX5601-T0 support
Flash procedure is described in next commit.
TLDR:
Copy preloader and uboot to /tmp and write them in the mtd.
This will also require new UBI partition and
volumes to boot openwrt.
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip
Changelist:
- Added profile for 4k+256 SPI NAND_TYPE
- Added basic Zyxel EX5601-T0 uboot profile
Backported from hitech95 branch:
- Button RESET pin fix
- Button WPS pin fix
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
(cherry picked from commit
a9cf87027e75c9798bf3cb683a7c32985e4ea483)
Daniel Golle [Fri, 8 Mar 2024 20:20:23 +0000 (20:20 +0000)]
ramips: add support for YunCore G720
The YunCore G720 is a dual band 802.11ax router with 5 GbE ports.
Specs:
- SoC: MediaTek MT7621
- Ethernet: 5x GbE ports (built-in MT7530)
- Wireless 2.4GHz / 5GHz: MediaTek MT7915E
- RAM: 256MiB
- ROM: 16MiB (W25Q128)
- 1 Button (reset)
- 8 LEDs (1x system, 2x wifi, 5x switch ports)
Flash instructions:
The vendor firmware is based on OpenWrt, the sysupgrade image can be
flashed using the '-F' (force) option on the CLI.
Make sure not to keep settings when doing so.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
65df33fc76f722701f161dd88828f61c9e31f1d1)
Darlan Pedro de Campos [Fri, 24 Nov 2023 00:31:05 +0000 (19:31 -0500)]
ramips: add support for TP-Link EX220 v1
This device is very similar, if not identical, to the TP-Link AX23 v1
but is targeted at service providers and features a completely different
flash layout.
Hardware
--------
CPU: MediaTek MT7621 DAT
RAM: 128MB DDR3 (integrated)
FLASH: 16MB SPI-NOR
WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax
SERIAL: 115200 8N1
LEDs - (3V3 - GND - RX - TX) - ETH ports
Installation
------------
Flashing is only possible via a serial connection using the sysupgrade
image; the factory image must be signed. You can flash the sysupgrade
image directly through the U-Boot console, or preferably, by booting the
initramfs image and flashing with the sysupgrade command. Follow these
steps for sysupgrade flashing:
1. Establish a UART serial connection.
2. Set up a TFTP server at 192.168.0.2 and copy the initramfs image
there.
3. Power on the device and press any key to interrupt normal boot.
4. Load the initramfs image using tftpboot.
5. Boot with bootm.
6. If you haven't done so already, back up all stock mtd partitions.
7. Copy the sysupgrade image to the router.
8. Flash OpenWrt through either LuCI or the sysupgrade command. Remember
not to attempt saving settings.
Revert to stock firmware
------------------------
Flash stock firmware via OEM web-recovery mode. If you don't have access
to the stock firmware image, you will need to restore the firmware
partition backed up earlier.
Web-Recovery
------------
The router supports an HTTP recovery mode:
1. Turn off the router.
2. Press the reset button and power on the device.
3. When all LEDs start flashing, release reset and quickly press it
again.
The interface is reachable at 192.168.0.1 and supports installation of
the OEM factory image. Note that flashing OpenWrt this way is not
possible, as mentioned above.
Signed-off-by: Darlan Pedro de Campos <darlanpedro@gmail.com>
(cherry picked from commit
2a0c9cc8cdaa76414993deaff3371dba294638db)
Filip Milivojevic [Thu, 18 Jan 2024 18:47:47 +0000 (19:47 +0100)]
ramips: Add support for Cudy WR1300 v3
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 128 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MediaTek MT7603E, MediaTek MT7613BE
- Switch: 1 WAN, 4 LAN (Gigabit)
- Buttons: Reset, WPS
- LEDs: System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS
- Power: DC 12V 1A tip positive
Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.
Cudy WR1300 v3 differs from v2 only in swapped WiFi chip PCIe slots. Common
nodes are extracted to .dtsi and new v2 and v3 dts are created.
Cudy WR1300 v2 dts now contains ieee80211-freq-limit.
The same manufacturer's built OpenWRT image is provided for both v2 and v3
devices as a step in installing, but for proper WiFi functionality,
a separate build is required.
Recovery:
- Loads only signed manufacture firmware due to bootloader RSA verification
- serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
- connect to any lan ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button for image to
download
- See http://www.cudytech.com/newsinfo/547425.html
Backported from branch main to 23.05.
Signed-off-by: Filip Milivojevic <zekica@gmail.com>
(cherry picked from commit
288738c59de0eeca1a0d2042882445ad54d95fe7)
projects / openwrt / staging / jow.git / log