git.openwrt.org Git - openwrt/staging/blogic.git/log

staging: comedi: addi_apci_1710: add the missing MODULE_* information

This driver is missing the MODULE_* information. Add the standard
comedi info.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: remove COMEDI_SUBD_TTLIO define

This define exists in hwdrv_APCI1710.c, where it's actually used.
Remove the duplicate define.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: remove the 'i_IorangeBase*'

These values in the boardinfor were used in the common addi-data
attach code to work out use of the PCI bars. Since this driver
has a localized attach we already know the use of the bars so
this information in the boardinfo is unnecessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: remove the eeprom parameters

This driver does not have an eeprom and does not use the data
saved in devpriv->s_EeParameters. Remove the code that initalizes
the eeprom parameters.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: remove dma setup/free code

This driver does not use dma. Remove the code that sets up the
dma and allocates the buffers in the attach and the code that
frees the buffers in the detach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: remove eeprom handling code

The apci1710 board does not have an eeprom. Remove the unnecessary
code to handle it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: remove i_ADDI_Reset

This driver is now separate from the "common" code used with the
addi-data drivers. There is no need to use i_ADDI_Reset() to call
the correct "reset" function.

Remove the i_ADDI_Reset() function and the 'reset' pointer to the
real function from the boardinfo and just call the function directly
where needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: cleanup addi_find_boardinfo()

This driver uses the comedi PCI auto attach mechanism and the comedi
core does not use the boardinfo during the attach.

Now that this driver has the attach separated from addi_common.c we
can remove passing the boardinfo in the comedi_driver and cleanup
the code that finds the boardinfo.

Also, rename addi_find_boardinfo() so it has namespace associated
with this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove special handling for apci1710

Now that the addi_apci_1710 driver is not using addi_common.c we can
remove the CONFIG_APCI_1710 define and all the special handling for
the initialization of it's subdevices.

Also remove the i_ADDIDATA_InsnReadEeprom() function from the
addi_apci_1710 driver. This board does not have an eeprom subdevice
and does not use this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: separate from addi_common.c

This addi-data driver uses a private function to initialize all
the subdevices during the attach of the board.

Copy the code in addi_common.c to this driver and remove the #include
that caused addi_common.c to be compiled with this driver. This will
allow removing the special handling for the apci1710 board in the
common code.

Rename the attach_pci and detach functions so they have namespace
associated with this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: update driver description comment

Reformat the comment used to describe the Comedi driver to use the usual
block comment style.

Update the information reflecting the fact that the driver no longer
supports manual attachment of devices via the `COMEDI_DEVCONFIG` ioctl.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: change DEBUG_PRINT()

Change the `DEBUG_PRINT(format, args...)` macro used by this module to
use either `pr_debug()` (if macro `HPDI_DEBUG` is defined) or
`no_printk()` instead of `printk()` or nothing.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: use board name to request resources

When requesting PCI region resources and IRQ, use the board name as the
resource owner string instead of the driver name.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: make board name pointer const

Change the type of the `name` member of `struct hpdi_board` from `char
*` to `const char *` as it should not be modifiable.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: remove board(dev) function

The `board(dev)` function just casts `dev->board_ptr` to a pointer to
the private data type `struct hpdi_private` and returns it. It's only
called from one function: `hpdi_auto_attach()`.

Remove `board()` and use a local variable to point to the `struct
hpdi_private` data structure.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: don't store physical base addresses

In `struct hpdi_private`, the `plx9080_phys_iobase` and
`hpdi_phys_iobase` hold the physical memory addresses from the PCI
BARs used by this driver. The physical addresses are only really needed
when ioremapping the resources when the device is being attached by
`hpdi_auto_attach()`. A non-zero value of the `hpdi_phys_iobase` is
also used to indicate that a call to `comedi_pci_enable()` was
successful so that `comedi_pci_disable()` should be called when the
device is detached by `hpdi_detach()`.

Remove the `plx9080_phys_iobase` and `hpdi_phys_iobase` members and use
`dev->iobase` as a flag to indicate whether `comedi_pci_disable()` needs
to be called by `hpdi_detach()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: remove devpriv->hw_dev

The `hw_dev` member of `struct hpdi_private` is used to point to the
`struct pci_dev`. This is redundant as the `struct comedi_device`
already has a pointer to the `struct device` within the `struct pci_dev`
and there is a convenient inline function, `comedi_to_pci_dev(dev)` that
returns a pointer to the `struct pci_dev`.

Remove the redundant `hw_dev` member and use alternate ways to get at
the `struct pci_dev`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: use auto_attach method

This driver does not need to support manual attachment of supported PCI
devices. Replace the `attach()` hook (`hpdi_attach()`) with an
`auto_attach()` hook (`hpdi_auto_attach()`). This will be called via
`comedi_pci_auto_config()` at PCI probe time.

This driver no longer increments the PCI reference during attachment, so
remove the call to `pci_dev_put()` when detaching the device.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_nme_task.h: remove function prototypes

there are function definitions missing for these prototypes, so
remove all 3 function protos.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_nme_ap_lib.h: remove the function prototypes

these function prototypes are missing the function definition,
remove them all.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_nme_lib.h: remove function prototypes

the function definitions are missing for these prototypes, so remove all
these.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: sme_blocking.c: add missing check for return of sme_wait_for_reply

sme_ap_config misses a check of the return of the sme_wait_for_reply
as all other functions do here, for the return of sme_wait_for_reply
add the check and fail if it returns other than 0.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: sme_blocking.c: remove braces around single statement blocks

remove the braces around single statement if blocks

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: sme_blocking.c: replace spaces with the tabs in sme_mgt_tspec

replace spaces at start of line with tabs in sme_mgt_tspec

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: sme_blocking.c: replace spaces with tabs

replace spaces at the beginning of the line with tabs in sme_mgt_packet_filter_set

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: inet.c: replaces spaces with tabs

replace spaces with tabs at the start of line

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: inet.c: single statement if blocks doesn't need braces

remove braces to single statement if blocks

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: do auto-attachment of PCI devices

This driver is an example of how to write a Comedi driver and includes
some code for handling PCI devices, but not very much.  It calls
`comedi_pci_auto_config()` at PCI probe time.  That normally expects to
call the comedi driver's `auto_attach()` hook (or the deprecated
`attach_pci()` hook), but will fall back to using the `attach()` hook
that should only be used for attaching devices "manually" via the
`COMEDI_DEVCONFIG` ioctl.

Add an `auto_attach()` hook (`skel_auto_attach()`) to handle
auto-attachment of supported PCI devices.  Add comments to the
`attach()` hook (`skel_attach()`) to indicate that it shouldn't
generally allow PCI devices to be attached that way (and probably isn't
needed at all for PCI-only Comedi drivers).  Add code to the `detach()`
hook (`skel_detach()`) to disable PCI devices enabled by the
`auto_attach()` hook.

`skel_auto_attach()` calls new function `skel_find_pci_board()` to find
a matching element in `skel_boards[]`.  PCI device ID information has
been added to `skel_boards[]` to give the function something to look
for.

Remove the `pci_dev` member of `struct skel_private` as drivers now use
the `hw_dev` member of `struct comedi_device` to get at the PCI device.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: move skel_pci_table

Move `skel_pci_table[]` closer to `skel_pci_table` so it falls within
the same `#ifdef`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: remove remaining forward declaration

Move `skel_ns_to_timer()` up so it's forward declaration can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: remove most forward declarations

Move `skel_attach()`, `skel_detach()` and `skel_driver` down the file so
that a bunch of forward declarations can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: use module_comedi_pci_driver()

Use the `module_comedi_pci_driver()` macro to register the module as a
comedi PCI driver instead of adding the boiler-plate code in full.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: remove driver_ prefix

Remove the `driver_` prefix from variable and function names. Rename
`driver_skel` to `skel_driver`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: replace pr_...() with dev_...()

Use the dev_info() etc. instead of pr_info() etc. Remove a couple of
them that seemed a bit pointless.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: remove thisboard macro

This driver's `thisboard` macro relies on a local variable having a
specific name. Replace it with a local variable of the same name in the
functions that use it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi: Use dev_ printks in drivers/ni_mio_cs.c

fixed below checkpatch warnings.
- WARNING: printk() should include KERN_ facility level

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi: fix the initialize statics issue in drivers/ni_mio_cs.c

fixed below checkpatch error.
- ERROR: do not initialise statics to 0 or NULL

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi: fix the spaces issue at the start of line in drivers/ni_mio_cs.c

fixed below checkpatch warnings.
- WARNING: please, no spaces at the start of a line

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: bypasslib: remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove ERROR and SUCCESS defines

These are not used. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove duplicate ADDIDATA_{ENABLE,DISABLE} defines

These are defined in addi_common.h, the hwdrv_* files do not need
to redefined them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove duplicate #include's

All these #include's have already been handled.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove addi_amcc_s5933.h

Now that the PCI bus walking has been removed from the addi-data
drivers, the only differenced between addi_amcc_s9533.h and the
standard comedi amcc_s5933.h is the additional defines for the
apci3120 "ADDON RELATED ADDITIONS". Move those defines to
hwdrv_apci3120.c.

Modify all the addi-data drivers to then include the standard
comedi amcc_s5933.h header and delete the duplicate in addi-data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove 'b_ValidDriver' from the private data

This variable is only used in the detach of the addi-data boards to
indicate that the attach of the board was successful and that the reset
function can be called. We can use the dev->iobase variable to indicate
this instead. Once this variable is set the attach always completes.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove 'allocated' from the private data

This variable is only used as a flag to indicate that the pci device
has been enabled. Use the comedi_device 'iobase' variable to indicate
this instead. This is how it's normally handled in the comedi pci
drivers.

Make the call to comedi_pci_disabled() in i_ADDI_Detach() common
and move it to the end of the function. Both the if and else case
require it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: cleanup reading of the PCI bars

Read the PCI bars directly into the private data variables and
remove all the local variables used for them in addi_attach_pci().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: use attach_pci callback

Use the comedi pci auto config mechanism to attach the addi-data
drivers. This allows removing all the PCI bus walking code.

Add a function, addi_find_boardinfo(), to find the driver specific
boardinfo. Since this function is currently in the common code we
have to use the pointer to the boardinfo that is stored in the
comedi_driver pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove i_pci_card_free()

This function calls comedi_pci_disable() to disable the pci
device when detached. It's only called from i_ADDI_Detach().
Move the code there and delete the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove attach option to disable dma

This pci driver currently uses the comedi legacy attach mechanism
which allows the user to pass configuration options to the driver
when it is attached to the comedi subsystem. The use of these
configuration options is preventing the conversion of the addi-data
drivers to the comedi auto attach mechanism.

For the addi-data drivers, option[2] is used to enable/disable dma.
The default (0) action is to enable dma is the driver supports it.

Remove this configuration option and just enable dma if it is
supported.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove 'irq' from the card data

This information can be found when needed in i_ADDI_Attach() by
using the pci_dev pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: add a 'pcidev' local var to i_ADDI_Attach()

Add a local variable for the pci_dev pointer to make the code a
bit cleaner.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: absorb pci_card_alloc() into i_ADDI_Attach()

The function pci_card_alloc() enables the pci device by calling
comedi_pci_enable() and then optionally calls pci_set_master() to
enable bus mastering for DMA.

Absorb this code directly into i_ADDI_Attach() as is more typical
for comedi PCI drivers. Also, remove the now unused i_Master
parameter from ptr_select_and_alloc_pci_card().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove io_addr array from card data

The io_addr array in the card data holds the PCI bar base addresses
returned by pci_resource_start(). Remove this array and just use
pci_resource_start() where needed in i_ADDI_Attach().

This also allows getting rid of i_pci_card_data() since it now
does nothing.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove irq parameter from i_pci_card_data()

The irq parameter passed to i_pci_card_data() is used to get the pci_dev
irq that is cached in the card data. This information can easily be found
when needed in i_ADDI_Attach() from the 'card' pointer to the card data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove unused parameters from i_pci_card_data()

The pci_bus, pci_slot, and pci_func data returned by i_pci_card_data()
are not used. Remove them from the parameters to the function and also
remove the local variables in i_ADDI_Attach() that held the returned
data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove the board attach noise

Remove all the kernel messages from i_ADDI_Attach(). These are just
additional boot noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove v_pci_card_list_display()

This function dumps a list of all the add-data PCI cards found. This
information is just noise. Remove the function.

Also, remove the parameter from v_pci_card_list_init() that caused
this information to be dumped.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_*: add module_comedi_pci_driver()

Pull the module init code out of addi_common.c and add it to
each addi-data driver. Rename the data and functions so they
have namespace associated with the drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_*: remove unneeded CONFIG_APCI_* defines

These defines were needed for the #ifdef'ery that used to exist
in addi_common.c. Since that has been removed these are no longer
used.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_APCI1710: absorb private header

The header file hwdrv_APCi1710.h is only included by the source
file hwdrv_APCI1710.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3200: absorb private header

The header file hwdrv_apci3200.h is only included by the source
file hwdrv_apci3200.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3200: remove forward declarations

This source file is #include'd when building the addi_apci_3200 and
addi_apci_3300 driver. All the functions in this file are actually
static and should not be exported to the kernel.

Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Pwm: absorb private header

The header file APCI1710_Pwm.h is only included by the source
file APCI1710_Pwm.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Pwm: remove forward declarations

This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.

Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_INCCPT: absorb private header

The header file APCI1710_INCCPT.h is only included by the source
file APCI1710_INCCPT.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_INCCPT: remove forward declarations

This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.

Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Chrono: absorb private header

The header file APCI1710_Chrono.h is only included by the source
file APCI1710_Chrono.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Chrono: remove forward declarations

This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.

Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_82x54: absorb private header

The header file APCI1710_82x54.h is only included by the source
file APCI1710_82x54.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_82x54: remove forward declarations

This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.

Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Dig_io: absorb private header

The header file APCI1710_Dig_io.h is only included by the source
file APCI1710_Dig_io.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Inp_cpt: absorb private header

The header file APCI1710_Inp_cpt.h is only included by the source
file APCI1710_Inp_cpt.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Ssi: absorb private header

The header file APCI1710_Ssi.h is only included by the source
file APCI1710_Ssi.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Tor: absorb private header

The header file APCI1710_Tor.h is only included by the source
file APCI1710_Tor.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: APCI1710_Ttl: absorb private header

The header file APCI1710_Ttl.h is only included by the source
file APCI1710_Ttl.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci3120: absorb private header

The header file hwdrv_apci3120.h is only included by the source
file hwrdv_apci3120.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3120: remove forward declarations

This source file is #include'd when building the addi_apci_3001 and
addi_apci_3120 drivers. All the functions in this file are actually
static and should not be exported to the kernel.

Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.

Also, remove most of the big comment blocks preceding each function.
Leave the 'task' information for some of them to assist in later cleanup.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci3xxx: absorb private header

The header file hwdrv_apci3xxx.h is only included by the source
file hwrdv_apci3xxx.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci3501: absorb private header

The header file hwdrv_apci3501.h is only included by the source
file hwrdv_apci3501.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci2200: absorb private header

The header file hwdrv_apci2200.h is only included by the source
file hwrdv_apci2200.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci2032: absorb private header

The header file hwdrv_apci2032.h is only included by the source
file hwrdv_apci2032.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci2016: absorb private header

The header file hwdrv_apci2016.h is only included by the source
file hwrdv_apci2016.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci16xx: absorb private header

The header file hwdrv_apci16xx.h is only included by the source
file hwrdv_apci16xx.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci1564: absorb private header

The header file hwdrv_apci1564.h is only included by the source
file hwrdv_apci1564.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci1516: absorb private header

The header file hwdrv_apci1516.h is only included by the source
file hwrdv_apci1516.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci1500: absorb private header

The header file hwdrv_apci1500.h is only included by the source
file hwrdv_apci1500.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci1032: absorb private header

The header file hwdrv_apci1032.h is only included by the source
file hwrdv_apci1032.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci035: absorb private header

The header file hwdrv_apci035.h is only included by the source
file hwrdv_apci035.c. Absorb the header into the source and
delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: rtllib_tx.c: fixed an asterisk coding style issue

Fixed coding style issue

Signed-off-by: Edgar Neukirchner <edgar.neukirchner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: use tasklet_kill in device remove/release process

Some driver uses tasklet_disable in device remove/release process,
tasklet_disable will inc tasklet->count and return. If the tasklet
is not handled yet under some softirq pressure, the tasklet will be
placed on the tasklet_vec, never have a chance to be excuted. This might
lead to a heavy loaded ksoftirqd, wakeup with pending_softirq, but
tasklet is disabled. tasklet_kill should be used in this case.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Rupesh Gujare <rgujare@ozmodevices.com>
Cc: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use auto_attach instead of attach_pci

Change the rtd520 driver to use the new `auto_attach()` method in
`struct comedi_driver` instead of the `attach_pci()` method. I plan to
remove the `attach_pci()` and `attach_usb()` methods once nothing is
using them.

Tag the new `rtd520_auto_attach()` function definition with `__devinit`
as it is only called during PCI probe.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Add ethtool printout to match MII regs

In the ethtool call et131x_get_regs(), some MII regs are missing.
Add them to the regs returned.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: handle mem suffixes in disk size zram_sysfs parameter

Use memparse() to allow mem suffixes in disksize sysfs number.
Examples:
    echo 256K > /sys/block/zram0/disksize
    echo 512M > /sys/block/zram0/disksize
    echo 1G > /sys/block/zram0/disksize

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: factor-out zram_decompress_page() function

zram_bvec_read() shared decompress functionality with zram_read_before_write() function.
Factor-out and make commonly used zram_decompress_page() function, which also simplified
error handling in zram_bvec_read().

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Remove typedef stLocalSFAddRequestAlt.

This patch removes typedef
stLocalSFAddRequestAlt in CmHost.h.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Remove typedef for stLocalSFAddIndicationAlt and call directly.

This patch removes typedef for
stLocalSFAddIndicationAlt, changes the
name of the struct to bcm_add_indication_alt,
and removes a comment. In addition, any
calls to typedef stLocalSFAddIndicationAlt
are changed to call the struct directly.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_log_configure.h: remove a bunch of function protos

all protos that are removed does not have a function definition
so remove all of them together

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>