David Bauer [Tue, 21 Dec 2021 21:00:34 +0000 (22:00 +0100)]
ath79: remove kernel 5.4
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 20 Dec 2021 16:29:49 +0000 (17:29 +0100)]
hostapd: add missing function declaration
Signed-off-by: David Bauer <mail@david-bauer.net>
Nick Hainke [Sun, 26 Dec 2021 10:59:44 +0000 (11:59 +0100)]
ath79: add missing UBNT_REVISION
The UBNT_REVISION was already added for the ubnt-xw target because:
U-boot bootloader on M-XW devices expects factory image revision
version in specific format. On airOS v6.1.7 with `U-Boot 1.1.4-s1039
(May 24 2017 - 15:58:18)` bootloader checks if the revision major(?)
number is actually a number, but in currently generated images there's
OpenWrt text and so the check fails
...
By placing arbitrary correct number first in major version, we make the
bootloader happy and we can flash factory images over TFTP again.
commit
d42a7c469909 ("ath79: ubnt-m-xw: Fix factory image flashing using TFTP recovery method")
Fixes errors in the form of (tftp flashing):
sent DATA <block=8577, 412 bytes>
received ERROR <code=2, msg=Firmware check failed>
Error code 2: Firmware check failed
The missing UBNT_REVISION was not noticed before, since the
UBNT_REVISION field for the ubnt-xm target was also set to:
"42.OpenWrt-..."
Probably, UBNT_REVISION for the ubnt-xm target was set by the ubnt-xw
and was never overridden somewhere else. However, it is missing and
should be part of the ubnt-xm device.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Hauke Mehrtens [Sun, 26 Dec 2021 23:57:19 +0000 (00:57 +0100)]
sunxi: Use rtl8723bu-firmware instead of rtl8723bs-firmware
The firmware for the rtl8723bs chip is now included in the
rtl8723bu-firmware package.
Fixes: 397dfe4a97e6 ("linux-firmware: Update to version 20121216")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 26 Dec 2021 22:38:52 +0000 (23:38 +0100)]
tcpdump: libpcap: Remove www.us.tcpdump.org mirror
The http://www.us.tcpdump.org mirror will go offline soon, only use the
normal download URL.
Reported-by: Denis Ovsienko <denis@ovsienko.info>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 18 Dec 2021 11:01:27 +0000 (12:01 +0100)]
linux-firmware: Update to version
20121216
The rtl8723bs firmware was removed and a symlink to the rtl8723bu
firmware was created like it is done in upstream linux-firmware.
The following OpenWrt packages are changing:
* amdgpu-firmware: Multiple updates and new files
* ar3k-firmware: Multiple updates and new files
* ath10k-firmware-qca6174: Updated ath10k/QCA6174/hw3.0/board-2.bin
* bnx2x-firmware: Added bnx2x-e1-7.13.21.0.fw, bnx2x-e1h-7.13.21.0.fw and bnx2x-e2-7.13.21.0.fw
* iwlwifi-firmware-iwl8260c: Updated iwlwifi-8000C-36.ucode
* iwlwifi-firmware-iwl8265: Updated iwlwifi-8265-36.ucode
* iwlwifi-firmware-iwl9000: Updated iwlwifi-9000-pu-b0-jf-b0-46.ucode
* iwlwifi-firmware-iwl9260: Updated iwlwifi-9260-th-b0-jf-b0-46.ucode
* r8169-firmware: Updated rtl8153c-1.fw
* rtl8723bs-firmware: removed
* rtl8723bu-firmware: Added rtlwifi/rtl8723bs_nic.bin symlink
* rtl8822ce-firmware: Updated rtw8822c_fw.bin
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Tue, 2 Nov 2021 04:03:15 +0000 (04:03 +0000)]
mediatek: mt7622: unifi6lr: properly register Ethernet PHY
This change enables proper Ethernet link status and speed reporting on
the Ubiquiti UniFi 6 LR access point:
mtk_soc_eth
1b100000.ethernet eth0: PHY [mdio-bus:08] driver [Aquantia AQR112C] (irq=POLL)
mtk_soc_eth
1b100000.ethernet eth0: configuring for phy/2500base-x link mode
mtk_soc_eth
1b100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 2 Nov 2021 00:57:36 +0000 (00:57 +0000)]
mediatek: mt7622: enable driver for Aquantia PHYs
Enable Aquantia Ethernet PHY driver as there is an AQR112C 2500Base-T
PHY in the Ubiquiti UniFi 6 LR access point.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 2 Nov 2021 04:02:49 +0000 (04:02 +0000)]
mediatek: add support for Clause 45 MDIO access
Add support for Clause 45 MDIO PHY register read and write operations
to mtk_eth_soc driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 26 Dec 2021 18:45:57 +0000 (18:45 +0000)]
kernel: generic: refresh patch
722-net-phy-aquantia-Add-AQR113-driver-support.patch needs refresh.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Mon, 20 Dec 2021 20:55:21 +0000 (21:55 +0100)]
kernel: mac80211: refresh patchset
Refreshed:
- 311-mac80211-use-coarse-boottime-for-airtime-fairness-co.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 20 Dec 2021 20:48:38 +0000 (21:48 +0100)]
kernel: ath10k: provide a build variant for small RAM devices
Based on:
1ac627024de9 ("kernel: ath10k-ct: provide a build variant for
small RAM devices")
Like described in the ath10k-ct-smallbuffers version, oom-killer gets
triggered frequently by devices with small RAM.
That change is necessary for many community mesh networks which use
ath10k based devices with too little RAM. The -ct driver has been
proven unstable if used with 11s meshing and only wave2 chipsets are
supporting 11s. Freifunk Berlin is nowadays assembling its
firmware-based completely of vanilla OpenWRT with some package additions
which are made through the imagebuilder. Therefore we cannot take the
approach other freifunk communities have taken to maintain that patch
downstream [1]. Other communities consider these devices as broken and
that change would pretty much give those devices a second life [2].
[1] - https://git.freifunk-franken.de/mirror/openwrt/commit/
450b306e540bc0f2c8a8841bbe4d9612f2b8cdea
[2] - https://github.com/freifunk-gluon/gluon/issues/1988#issuecomment-
619532909
Signed-off-by: Simon Polack <spolack+git@mailbox.org>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Rafał Miłecki [Fri, 24 Dec 2021 22:07:39 +0000 (23:07 +0100)]
bcm4908: include ATF in bootfs images
It's required for proper booting.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 17 Dec 2021 10:40:54 +0000 (11:40 +0100)]
arm-trusted-firmware-bcm63xx: add ATF for Broadcom devices
Right now it includes bcm4908 variant only that is required by BCM4908
family devices with U-Boot.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Thu, 23 Dec 2021 19:01:48 +0000 (19:01 +0000)]
mvebu: puzzle: wan LED and fix default network
Fix default network configuration of the Puzzle-M902 so all LAN ports
are included in the LAN bridge.
Setup network LED to indicate WAN port link status, like vendor
firmware does as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 23 Dec 2021 18:10:05 +0000 (18:10 +0000)]
mvebu: enable Aquantia phy driver for Puzzle devices
Fixes Ethernet link status on all ports and makes 2.5G ports usable
in 2.5G and 1G full-duplex mode.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 23 Dec 2021 17:36:48 +0000 (17:36 +0000)]
kernel: add id for AQR112 Ethernet phy variants
Add ids for AQR112R and AQR112C 2.5G Ethernet PHYs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 23 Dec 2021 17:36:01 +0000 (17:36 +0000)]
kernel: import patch enabling AQR113 PHY
Add PHY ID for the Aquantia AQR113 PHY.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 2 Nov 2021 00:55:40 +0000 (00:55 +0000)]
kernel: import patch enabling AQR112 and AQR412 PHY
Copy and refresh patch enabling AQR112 and AQR412 Ethernet PHY from
layerscape (5.4) target to generic (5.10) as AQR112 can also be found
on other targets as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Thu, 23 Dec 2021 18:18:33 +0000 (19:18 +0100)]
hostapd: only attempt to set qos map if supported by the driver
Fixes issues with brcmfmac
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Tue, 21 Dec 2021 23:39:28 +0000 (23:39 +0000)]
mvebu: remove accidentally added file
Remove accidentally added file (which was a left-over of a by-now
replaced driver)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Arnout Vandecappelle (Essensium/Mind) [Tue, 21 Dec 2021 17:41:33 +0000 (18:41 +0100)]
hostapd: keep HE capability after channel switch in AP+STA/Mesh
The auto-ht option already kept HT and VHT support, but wasn't updated
to support HE (11ax).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Daniel Golle [Tue, 21 Dec 2021 21:50:32 +0000 (21:50 +0000)]
mvebu: puzzle-m901: add LEDs, fan and reset button
Wire up MCU driver for LEDs, fan and temperature sensor, and add
GPIO reset button just like on the M902 also on the Puzzle M901.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 21 Dec 2021 21:49:25 +0000 (21:49 +0000)]
mvebu: puzzle-m902: add GPIO reset button
Add reset button to device tree so it has the function expected from
usual OpenWrt devices.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 21 Dec 2021 21:44:37 +0000 (21:44 +0000)]
mvebu: puzzle-mcu: improve led driver
Set blinking mode using scheduled work instead of blocking which may
result in deadlocks.
Add dynamic kprintf debugging hexdumps of all MCU rx and tx.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Paul Spooren [Thu, 30 Sep 2021 05:15:42 +0000 (19:15 -1000)]
ath79: switch to Kernel 5.10
Kernel 5.10 is used by many people since quite a while. With other
targets already moved to 5.10, let ath79 follow suit.
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ath79/tl-wdr3600; ath79/tl-wdr4300]
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> [ath79/tl-wdr4300]
Signed-off-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Stijn Tintel [Fri, 6 Aug 2021 23:41:11 +0000 (02:41 +0300)]
qoriq: add support for WatchGuard Firebox M300
This device is based on NXP's QorIQ T2081QDS board, with a quad-core
dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5
ethernet interfaces, of which 3 are connected to the ethernet ports on
the front panel. The other 2 are internally connected to a Marvell
88E6171 switch; the other 5 ports of this switch are also connected to
the ethernet ports on the front panel.
Installation: write the sdcard image to an SD card. Stock U-Boot will
not boot, wait for it to fail then run these commands:
setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb
setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin
setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr'
saveenv
reset
The default U-Boot boot entry will now boot OpenWrt from the SD card.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
Stijn Tintel [Fri, 6 Aug 2021 21:35:53 +0000 (00:35 +0300)]
qoriq: new target
Add a new target named "qoriq", that will support boards using PowerPC
processors from NXP's QorIQ brand.
This doesn't actually add support for any board yet, so that
installation instructions can go in the commit message of the commit
that adds actual support for a board.
Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64
rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only
difference between e5500 and e6500 is AltiVec support, and the kernel
checks for it at runtime. Musl will only check at runtime if AltiVec
support is disabled at compile-time, so we need to use e5500 in CPU_TYPE
to avoid SIGILL.
Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as
neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes
sqrt and sqrtf to use these ASM instructions on PowerPC64.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
Stijn Tintel [Sun, 3 Oct 2021 14:19:20 +0000 (17:19 +0300)]
libunwind: add ppc64 support
Backport an upstream patch to make libunwind build on ppc64, and add
powerpc64 to the dependencies.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
Stijn Tintel [Sun, 15 Aug 2021 16:00:02 +0000 (19:00 +0300)]
nettle: disable assembler on ppc64
As of version 3.7, Nettle added PowerPC64 assembly for several
algorithms. Unfortunately, they cause build to fail due to ABI mismatch:
gcm-hash.o: ABI version 1 is not compatible with ABI version 2 output
Disable assembler when ppc64 and musl are used for now.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
Stijn Tintel [Fri, 30 Jul 2021 17:21:50 +0000 (20:21 +0300)]
openssl: add ppc64 support
Backport an upstream patch that adds support for ELFv2 ABI on big endian
ppc64. As musl only supports ELFv2 ABI on ppc64 regardless of
endianness, this is required to be able to build OpenSSL for ppc64be.
Modify our targets patch to add linux-powerpc64-openwrt, which will use
the linux64v2 perlasm scheme. This will probably break the combination
ppc64 with glibc, but as we really only want to support musl, this
shouldn't be a problem.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
Stijn Tintel [Tue, 22 Sep 2020 11:02:58 +0000 (14:02 +0300)]
toolchain/gcc: use ELFv2 ABI on ppc64 with musl
At configuration time, gcc assumes that ppc64be targets use the ELFv1
ABI, and ppc64le targets use the ELFv2 ABI. However, musl libc does not
support the ELFv1 ABI on ppc64 at all, regardless of the endianness.
Therefore, when building for a ppc64 arch and with musl libc, instruct
gcc to use the ELFv2 ABI.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93157 for more info.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
Stijn Tintel [Tue, 22 Sep 2020 10:37:56 +0000 (13:37 +0300)]
build: add e5500 CPU_TYPE
This CPU type is compatible with NXP's PPC based QorIQ processors, and
will be used by the upcoming new qoriq target.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
Daniel Golle [Tue, 21 Dec 2021 16:27:16 +0000 (16:27 +0000)]
mvebu: puzzle-m902: add driver for MCU driving LEDs, fan and buzzer
Backport MFD driver for communicating with the on-board MCU found on
IEI World Puzzle appliances.
Improve the driver to support multiple LEDs, apply a default state and
let MCU take care of blinking if timing is within supported range.
Wire up LEDs and fan for Puzzle M902 in device tree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 20 Dec 2021 23:28:54 +0000 (00:28 +0100)]
bpf: add -mcpu=v3 to support 32-bit alu ops
Fixes JIT on 32-bit ARM and improves performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 20 Dec 2021 10:53:29 +0000 (11:53 +0100)]
mt76: fix Makefile dependencies for mt7921
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Stijn Tintel [Wed, 17 Mar 2021 00:14:09 +0000 (02:14 +0200)]
kernel: drop obsolete kmod-video-core dependencies
These dependencies do not exist in any of the supported kernel versions.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 17 Mar 2021 00:06:43 +0000 (02:06 +0200)]
kernel: drop obsolete symbols from kmod-video-core
These symbols don't exist in any of the supported kernel versions.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Daniel Golle [Mon, 20 Dec 2021 02:21:23 +0000 (02:21 +0000)]
procd: update to git HEAD
eb522fc uxc: consider uvol and etc location for configurations
16a6ee9 uxc: integrate console into uxc
129d050 remove ujail-console
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Sat, 18 Dec 2021 16:24:09 +0000 (17:24 +0100)]
hostapd: make OpenWrt statistics per-BSS
WNM and RRM statistics were incorrectly per-PHY, leading to shared
statistic counters per BSS.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 30 Oct 2021 22:11:51 +0000 (00:11 +0200)]
hostapd: provide BSS-transition-queries to ubus subscribers
Provide incoming BSS transition queries to ubus subscribers.
This allows external steering daemons to provide clients with
an optimal list of transition candidates.
This commit has no functional state in case no ubus subscriber is
present or it does not handle this ubus message.
To prevent hostapd from sending out a generic response by itself, a
subscribing daemon has to return a non-zero response code to hostapd.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 27 Sep 2021 13:53:25 +0000 (15:53 +0200)]
hostapd: WNM: allow specifying dialog-token
Backport a patch to allow extending the ubus BSS-transition method
for specifying individual dialog tokens for BSS transition
management requests.
This is required for handling BSS transition queries in the future.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Fri, 17 Dec 2021 23:33:57 +0000 (00:33 +0100)]
ramips: work around duplicate MAC address on U6 Lite
The UniFi 6 Lite has two MAC addresses for the 2.4 and 5GHz radio in
it's EEPROM partition.
On my unit these are
F4 92 BF A0 BB 6F
F6 92 BF A0 BB 6F
The problem with these is that mac80211 increases the first octet by
2, which leads to conflicting MAC addresses between radios.
Work around this problem for now by increasing the last octet by 1 on
the 5 GHz radio.
Ubiquiti increases the last octet by 2 for each subsequent VAP created
per radio. Ideally we should do the same, however this functionality is
currently lacking from mac80211.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Sat, 18 Dec 2021 01:45:44 +0000 (01:45 +0000)]
mediatek: mt7623: bpi-r2: add ethernet alias to device tree
Add ethernet0 alias in device tree to make U-Boot inherit the Ethernet
mac address (set via environment variable 'ethaddr') down to Linux.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hans Dedecker [Fri, 17 Dec 2021 20:04:54 +0000 (21:04 +0100)]
odhcp6c: update to latest git HEAD
39b584b Revert "dhcpv6: add a minimum valid lifetime for IA_PD updates"
c9578e1 dhcpv6: add support for null IA_PD valid lifetime
ca43ea3 dhcpv6: add a minimum valid lifetime for IA_PD updates
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 17 Dec 2021 19:54:44 +0000 (20:54 +0100)]
netifd: update to latest git HEAD
5ca5e0b netifd: allow disabling rule/rule6 config sections
8875960 interface-ip: add support for IPv6 prefix invalidation
e589c05 interface-ip: use metric when looking for a route
b54ffde main: fix hotplug script usage message
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Sergey Ryazanov [Thu, 16 Dec 2021 22:23:08 +0000 (01:23 +0300)]
kernel: 5.10: consolidate mac80211 crypto options
Each of
- CRYPTO_AEAD2
- CRYPTO_AEAD
- CRYPTO_GF128MUL
- CRYPTO_GHASH
- CRYPTO_HASH2
- CRYPTO_HASH
- CRYPTO_MANAGER2
- CRYPTO_MANAGER
- CRYPTO_NULL2
either directly required for mac80211 crypto support, or directly
selected by such options. Support for the mac80211 crypto was enabled in
the generic config since
c7182123b9 ("kernel: make cryptoapi support
needed by mac80211 built-in"). So move the above options from the target
configs to the generic config to make it clear why do we need them.
CC: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Sergey Ryazanov [Thu, 16 Dec 2021 22:23:07 +0000 (01:23 +0300)]
kernel: filter out both Clang and LLD versions
Both CLANG_VERSION and LLD_VERISON are autogenerated runtime
configuration options, so add them to the kernel configuration filter
and remove from generic and per-target configs to keep configs clean.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Ilya Lipnitskiy [Wed, 8 Dec 2021 01:28:23 +0000 (17:28 -0800)]
toolchain/gcc: refresh gcc-11.2.0 patch
Run make toolchain/gcc/minimal/refresh (with glibc, with musl
toolchain/gcc/{initial,final}/refresh don't work)
Fixes: ab241e0937c9 ("toolchain/gcc: fix build on MacOS arm64")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Wed, 8 Dec 2021 01:28:22 +0000 (17:28 -0800)]
toolchain/gcc: replace revert with upstream fix
This will make upgrade to v11.3.0 easier and follows upstream more
closely.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Wed, 8 Dec 2021 01:28:21 +0000 (17:28 -0800)]
toolchain/gcc: remove upstreamed patch, add backport
This patch has been upstream since GCC 10.
Dragan Mladjenovic (2):
Emit .note.GNU-stack for soft-float linux targets.
Emit .note.GNU-stack for hard-float linux targets.
Link: https://gcc.gnu.org/g:a3c1e1f2ff88
Link: https://gcc.gnu.org/g:54b3d52c3cca
Add backport patch to define TARGET_LIBC_GNUSTACK on musl to add
.note.GNU-stack on hard-float MIPS targets.
Link: https://gcc.gnu.org/g:25abbb924968
The net effect should be the exact same functionality while following
upstream code instead of a custom outdated patch.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
John Audia [Fri, 17 Dec 2021 11:42:51 +0000 (06:42 -0500)]
kernel: bump 5.10 to 5.10.87
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800*
Run-tested: bcm2711/RPi4B, ipq806x/R7800*
*Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Thu, 16 Dec 2021 18:27:45 +0000 (13:27 -0500)]
kernel: bump 5.10 to 5.10.86
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800*
Run-tested: bcm2711/RPi4B, ipq806x/R7800*
*Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Tue, 14 Dec 2021 11:15:08 +0000 (06:15 -0500)]
kernel: bump 5.10 to 5.10.85
Removed target for patch which does not exist:
bcm27xx/patches-5.10/950-0249-kbuild-Disable-gcc-plugins.patch
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800*
Run-tested: bcm2711/RPi4B, ipq806x/R7800*
* Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Wed, 8 Dec 2021 11:14:30 +0000 (06:14 -0500)]
kernel: bump 5.10 to 5.10.84
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Fri, 17 Dec 2021 11:48:52 +0000 (06:48 -0500)]
kernel: bump 5.4 to 5.4.167
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/mt7621*
*FS#4149 affects me so I had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e
in order to downgrade to 2.35.1
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Thu, 16 Dec 2021 19:53:58 +0000 (14:53 -0500)]
kernel: bump 5.4 to 5.4.166
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/mt7621*
*FS#4149 affects me so I had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e
in order to downgrade to 2.35.1
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Wed, 15 Dec 2021 11:20:33 +0000 (06:20 -0500)]
kernel: bump 5.4 to 5.4.165
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/mt7621*
*FS#4149 affects me so I had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e
in order to downgrade to 2.35.1
Signed-off-by: John Audia <graysky@archlinux.us>
Felix Fietkau [Tue, 14 Dec 2021 16:58:14 +0000 (17:58 +0100)]
mac80211: optimize airtime fairness code to reduce cpu usage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Thu, 16 Dec 2021 19:27:04 +0000 (20:27 +0100)]
hostapd: close correct blobmsg table
Signed-off-by: David Bauer <mail@david-bauer.net>
Sungbo Eo [Thu, 16 Dec 2021 13:14:48 +0000 (22:14 +0900)]
ramips: mt7620: tidy up 02_network
* fix alphabetic sorting
* consolidate duplicate cases
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Rafał Miłecki [Thu, 16 Dec 2021 07:25:18 +0000 (08:25 +0100)]
bcm4908: add uboot-envtools to default packages
It's required by sysupgrade to access UBI metadata partitions.
Fixes: 5f05795aa771 ("bcm4908: sysupgrade: add pkgtb format support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 16 Dec 2021 06:07:34 +0000 (07:07 +0100)]
kernel: backport support for multicolor & RGB LEDs to 5.4
This is a requirement for backporting DT files defining such LEDs.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Mon, 13 Dec 2021 17:15:07 +0000 (18:15 +0100)]
kernel: backport the upstream implementation of threaded NAPI to 5.4
The workqueue based implementation has a few corner cases and typically lower
performance than the upstream one
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rui Salvaterra [Tue, 14 Dec 2021 13:46:19 +0000 (13:46 +0000)]
ramips: remove Linux 5.4 support
We're at 5.10 stable, this can finally go.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
David Bauer [Tue, 14 Dec 2021 23:01:23 +0000 (00:01 +0100)]
ramips: fix Tenbay T-MB5EU v1 Wireless MAC
It was reported, that Tenbay T-MB5EU v1 do have incorrect Wireless MAC
address set on 2.4 and 5 GHz.
Some boards do not seem to have the correct MAC address set for the
external PHY of the MT7915 radio at caldata offset 0xa.
As the external PHY does not expose a DT binding (yet), fix up the mac
address in userspace.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 27 Nov 2021 21:08:28 +0000 (22:08 +0100)]
hostapd: add OpenWrt specific statistic counters
This adds a new struct for storing statistics not (yet) tracked by
hostapd regarding RRM and WNM activity.
These statistics can be read using the get_status hostapd interface ubus
method.
Signed-off-by: David Bauer <mail@david-bauer.net>
Hauke Mehrtens [Sat, 20 Nov 2021 23:11:24 +0000 (00:11 +0100)]
iw: Update to version 5.16
Revert a commit to allow providing CFLAGS and LIBS from OpenWrt package
Makefile.
This downgrades the nl80211.h to kernel 5.15 and removes FILS_CRYPTO_OFFLOAD.
This is needed to make it compatible with our patched mac80211 from
kernel 5.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 20 Nov 2021 23:10:51 +0000 (00:10 +0100)]
libnl-tiny: update to the latest version
8e0555f attr.h: Add NLA_PUT_S32
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 5 Dec 2021 15:36:05 +0000 (16:36 +0100)]
mac80211: Update to version 5.15.8
The following patches were backported from upstream before and are not
needed any more:
package/kernel/mac80211/patches/ath10k/081-ath10k-fix-module-load-regression-with-iram-recovery-feature.patch
package/kernel/mac80211/patches/ath10k/980-ath10k-fix-max-antenna-gain-unit.patch
package/kernel/mac80211/patches/build/010-headers-Add-devm_platform_get_and_ioremap_resource.patch
package/kernel/mac80211/patches/subsys/300-mac80211-drop-check-for-DONT_REORDER-in-__ieee80211_.patch
package/kernel/mac80211/patches/subsys/307-mac80211-do-not-access-the-IV-when-it-was-stripped.patch
package/kernel/mac80211/patches/subsys/308-mac80211-fix-radiotap-header-generation.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rafał Miłecki [Tue, 14 Dec 2021 16:57:49 +0000 (17:57 +0100)]
bcm4908: add fdt-utils to default packages
It's required by sysupgrade.
Fixes: 5f05795aa771 ("bcm4908: sysupgrade: add pkgtb format support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Martin Schiller [Wed, 3 Nov 2021 16:16:52 +0000 (17:16 +0100)]
layerscape: armv7: refresh config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 13:31:50 +0000 (14:31 +0100)]
layerscape: armv7: copy config-5.4 to config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 10:29:35 +0000 (11:29 +0100)]
layerscape: armv8_64b: refresh config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:51:53 +0000 (10:51 +0100)]
layerscape: armv8_64b: copy config-5.4 to config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:36:35 +0000 (10:36 +0100)]
layerscape: armv8_64b: use non-SDK dts files for linux-5.10 or newer
Since we decided to drop the LSDK patches with linux-5.10, we now have
to switch to the corresponding upstream dts files as well.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:27:04 +0000 (10:27 +0100)]
layerscape: armv8_64b: fix KERNEL_LOADADDR for linux >= 5.8
In kernel versions newer than 5.8 the arm64 TEXT_OFFSET (0x80000) has
been set to 0x0 (and later removed). This will break Uimages with kernel
load addresses that aren't 2MiB aligned any longer. Resulting in the
kernel silently fail to boot. For layerscape armv8_64b targets this
needs to be changed to 0x80000000 (start of RAM).
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 12:48:24 +0000 (13:48 +0100)]
layerscape: add patches for kernel 5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:46:35 +0000 (10:46 +0100)]
layerscape: add kernel 5.10 as testing version
This patch adds "KERNEL_TESTING_PATCHVER:=5.10" to the Makefile in
layerscape target to allow using Kernel 5.10 for testing.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:18:39 +0000 (10:18 +0100)]
layerscape: remove unneeded KERNEL_ENTRY_POINT definition
As KERNEL_ENTRY_POINT is identical to KERNEL_LOADADDR, drop it.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:54:48 +0000 (12:54 +0200)]
ls-ddr-phy: bump to LSDK-21.08
Update ls-ddr-phy to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:54:09 +0000 (12:54 +0200)]
restool: bump to LSDK-21.08
Update restool to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:53:06 +0000 (12:53 +0200)]
ls-dpl: bump to LSDK-21.08
Update ls-dpl to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:52:10 +0000 (12:52 +0200)]
ls-mc: bump to LSDK-21.08
Update ls-mc to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:51:13 +0000 (12:51 +0200)]
ppfe-firmware: bump to LSDK-21.08
Update ppfe-firmware to latest LSDK-21.08.
Switched to AUTORELEASE for simplicity.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:49:56 +0000 (12:49 +0200)]
fman-ucode: bump to LSDK-21.08
Just update PKG_VERSION/PKG_MIRROR_HASH since fman-ucode
of LSDK-21.08 had no changes.
Switched to AUTORELEASE for simplicity.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:43:55 +0000 (12:43 +0200)]
tfa-layerscape: bump to LSDK-21.08
Update tfa package to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Thu, 7 Oct 2021 06:56:19 +0000 (08:56 +0200)]
uboot-layerscape: bump to LSDK-21.08
Update layerscape u-boot package to LSDK-21.08 and drop patches which
are no longer needed.
The new env variable 'fsl_bootcmd_mcinitcmd_set' is needed to protect
the configured bootcmd and mc_init values. See [1] for more
informations.
[1] https://source.denx.de/u-boot/u-boot/-/commit/
b62c174e861bddc3c7131045ed018556645cecb9
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:46:38 +0000 (12:46 +0200)]
ls-rcw: bump to LSDK-21.08
Update ls-rcw to latest LSDK-21.08.
Drop patch 0001 since it had been integrated.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Rui Salvaterra [Thu, 9 Sep 2021 08:44:41 +0000 (09:44 +0100)]
ramips: switch to kernel 5.10
Tested on mt7621 (Redmi AC2100) and running stable for several months.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Pawel Dembicki [Thu, 10 Jun 2021 15:17:23 +0000 (17:17 +0200)]
ramips: mt7620: use OKLI loader with Jboot devices
Jboot devices have problem with >2MB kernelsize. The only way to avoid
this problem is use small loader.
This patch switch all mt7620 Jboot devices to lzma OKLI loader.
Suggested-by: Szabolcs Hubai <szab.hu@gmail.com>
Co-authored-by: Michael Pratt <mcpratt@pm.me>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Rafał Miłecki [Mon, 13 Dec 2021 17:19:05 +0000 (18:19 +0100)]
bcm53xx: sysupgrade: fix support for Luxul's legacy firmware format
Fixes: 80041dea7094 ("bcm53xx: sysupgrade: refactor handling different firmware formats")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 13 Dec 2021 12:47:39 +0000 (13:47 +0100)]
otrx: update to the latest master
56e8e19 otrx: support TRX from stdin when extracting
a37ccaf otrx: support unsorted partitions offsets
1fa145e otrx: extract shared code opening & parsing TRX format
4ecefda otrx: allow validating TRX from stdin
cf01e69 otrx: avoid unneeded fseek() when calculating CRC32
Fixes: 80041dea7094 ("bcm53xx: sysupgrade: refactor handling different firmware formats")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 8 Dec 2021 11:21:48 +0000 (12:21 +0100)]
bcm4908: sysupgrade: add pkgtb format support
BCM4908 devices with U-Boot use pkgtb firmware format. It's based on
U-Boot's FIT: DTB with configurations, images & embedded data.
This format contains bootfs, rootfs and optionally a first stage U-Boot
loader. Contained images need to be extracted & flashed.
Broadcom used two sets of firmwares: main & backup. It uses UBI volumes
"metadata1" & "metadata2" for storing U-Boot env variables with info
about flashed images.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 7 Dec 2021 12:00:02 +0000 (13:00 +0100)]
dtc: support printing binary data with fdtget
It's needed for extracting binary images.
Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 7 Dec 2021 12:00:01 +0000 (13:00 +0100)]
dtc: import package for dtc & fdt from packages feed
fdt* utils are needed by targets that use U-Boot FIT images for
sysupgrade. It includes all recent BCM4908 SoC routers as Broadcom
switched from CFE to U-Boot.
fdtget is required for extracting images (bootfs & rootfs) from
Broadcom's ITB. Extracted images can be then flashed to UBI volumes.
sysupgrade is core functionality so it needs dtc as part of base code
base.
Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Moritz Warning [Sat, 11 Dec 2021 08:33:46 +0000 (09:33 +0100)]
treewide: use uniform vendor value for british telecom
British Telecom is mostly known as BT.
Signed-off-by: Moritz Warning <moritzwarning@web.de>
John Audia [Wed, 1 Dec 2021 11:28:02 +0000 (06:28 -0500)]
kernel: bump 5.10 to 5.10.83
Removed upstreamed:
bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1]
bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=
b2cd6fdcbe0a5cb44e4610a08cc58261d494a885
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=
9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6
Build system: x86_64*
Build-tested: bcm2711/RPi4B, ipq806x/R7800†
Run-tested: bcm2711/RPi4B, ipq806x/R7800†
* Had to revert
7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build
(latest bump of ca-certificates)
† Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
Enrico Mioso [Fri, 3 Dec 2021 16:32:20 +0000 (17:32 +0100)]
ipq40xx: fix reset button GPIO for GL.iNet GL-B2200
GL.iNet's U-Boot checks for GPIO 40, not 43.
Changing this allows the RESET button to work as expected.
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
CC: Daniel Golle <daniel@makrotopia.org>
CC: Li Zhang <li.zhang@gl-inet.com>
Kyoungkyu Park [Sat, 13 Nov 2021 16:03:24 +0000 (01:03 +0900)]
ramips: add support for HUMAX E10
HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router,
based on MediaTek MT7621A.
Specifications:
- SoC: MT7621A
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB (MXIC MX25L12805D)
- WiFi:
- 2.4GHz: MT7615
- 5GHz: MT7615
- Ethernet: 2x 10/100/1000Mbps
- Switch: SoC internal
- USB: 1x USB 2.0 Type-A
- UART: J1 (57600 8N1)
- pinout: [3V3] (RXD) (GND) (TXD)
Installation via web interface:
- Flash **factory** image through the stock web interface.
Recovery procedure:
1. Connect ethernet cable between Router **LAN** port and PC Ethernet port.
2. Set your computer to a static IP **192.168.1.1**
3. Turn the device off and wait a few seconds. Hold the WPS button on front
of device and insert power.
4. Send a firmware image to **192.168.1.6** using TFTP.
You can use any TFTP client. (tftp, curl, Tftpd64...)
- It can accept both images which is
HUMAX stock firmware dump (0x70000-0x1000000) image
and OpenWRT **sysupgrade** image.
Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space>
[remove trailing whitespace]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
projects / openwrt / staging / robimarko.git / log