lib: bitmap: eliminate branch in __bitmap_shift_right

We can shift the bits from lower and upper into place before assembling
dst[k]; moving the shift of upper into the branch where we already know
that rem is non-zero allows us to remove a conditional.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: change bitmap_shift_right to take unsigned parameters

I've previously changed the nbits parameter of most bitmap_* functions to
unsigned; now it is bitmap_shift_{left,right}'s turn.  This alone saves
some .text, but while at it I found that there were a few other things one
could do.  The end result of these seven patches is

  $ scripts/bloat-o-meter /tmp/bitmap.o.{old,new}
  add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-328 (-328)
  function                                     old     new   delta
  __bitmap_shift_right                         384     226    -158
  __bitmap_shift_left                          306     136    -170

and less importantly also a smaller stack footprint

  $ stack-o-meter.pl master bitmap
  file                 function                       old  new  delta
  lib/bitmap.o         __bitmap_shift_right             24    8  -16
  lib/bitmap.o         __bitmap_shift_left              24    0  -24

For each pair of 0 <= shift <= nbits <= 256 I've tested the end result
with a few randomly filled src buffers (including garbage beyond nbits),
in each case verifying that the shift {left,right}-most bits of dst are
zero and the remaining nbits-shift bits correspond to src, so I'm fairly
confident I didn't screw up.  That hasn't stopped me from being wrong
before, though.

This patch (of 7):

gcc can generate slightly better code for stuff like "nbits %
BITS_PER_LONG" when it knows nbits is not negative.  Since negative size
bitmaps or shift amounts don't make sense, change these parameters of
bitmap_shift_right to unsigned.

The expressions involving "lim - 1" are still ok, since if lim is 0 the
loop is never executed.

Also use "shift" and "nbits" consistently for the parameter names.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: elide bitmap_copy_le on little-endian

On little-endian, there's no reason to have an extra, presumably less
efficient, way of copying a bitmap.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: change prototype of bitmap_copy_le

Make the prototype of bitmap_copy_le the same as bitmap_copy's.  All other
bitmap_* functions take unsigned long* parameters; there's no reason this
should be special.

The only current user is the static inline uwb_mas_bm_copy_le, which
already does the void* laundering, so the end users can pass their u8 or
__le32 buffers without a cast.

Furthermore, this allows us to simply let bitmap_copy_le be an alias for
bitmap_copy on little-endian; see next patch.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-next' of git://git./linux/kernel/git/cooloney/linux-leds

Pull LED subsystem update from Bryan Wu:
 "The big change of LED subsystem is introducing a new LED class for
  Flash type LEDs which will be used for V4L2 subsystem.

  Also we got some cleanup and fixes"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-gpio: Pass on error codes unmodified
  DT: leds: Add led-sources property
  leds: Add LED Flash class extension to the LED subsystem
  leds: leds-mc13783: Use of_get_child_by_name() instead of refcount hack
  leds: Use setup_timer
  leds: Don't allow brightness values greater than max_brightness
  DT: leds: Add flash LED devices related properties

Merge tag 'modules-next-for-linus' of git://git./linux/kernel/git/rusty/linux

Pull module update from Rusty Russell:
 "Trivial cleanups, mainly"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Replace over-engineered nested sleep
  module: Annotate nested sleep in resolve_symbol()
  module: Remove double spaces in module verification taint message
  kernel/module.c: Free lock-classes if parse_args failed
  module: set ksymtab/kcrctab* section addresses to 0x0

Merge git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile changes from Chris Metcalf:
 "Not much in this batch, just some minor cleanups"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: change MAINTAINERS website from tilera.com to ezchip.com
  tile: enable sparse checks for get/put_user
  tile: fix put_user sparse errors
  tile: default to little endian on older toolchains

Revert "x86/apic: Only disable CPU x2apic mode when necessary"

This reverts commit 5fcee53ce705d49c766f8a302c7e93bdfc33c124.

It causes the suspend to fail on at least the Chromebook Pixel, possibly
other platforms too.

Joerg Roedel points out that the logic should probably have been

                if (max_physical_apicid > 255 ||
                    !(IS_ENABLED(CONFIG_HYPERVISOR_GUEST) &&
                      hypervisor_x2apic_available())) {

instead, but since the code is not in any fast-path, so we can just live
without that optimization and just revert to the original code.

Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tile: change MAINTAINERS website from tilera.com to ezchip.com

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM update from Paolo Bonzini:
 "Fairly small update, but there are some interesting new features.

  Common:
     Optional support for adding a small amount of polling on each HLT
     instruction executed in the guest (or equivalent for other
     architectures).  This can improve latency up to 50% on some
     scenarios (e.g. O_DSYNC writes or TCP_RR netperf tests).  This
     also has to be enabled manually for now, but the plan is to
     auto-tune this in the future.

  ARM/ARM64:
     The highlights are support for GICv3 emulation and dirty page
     tracking

  s390:
     Several optimizations and bugfixes.  Also a first: a feature
     exposed by KVM (UUID and long guest name in /proc/sysinfo) before
     it is available in IBM's hypervisor! :)

  MIPS:
     Bugfixes.

  x86:
     Support for PML (page modification logging, a new feature in
     Broadwell Xeons that speeds up dirty page tracking), nested
     virtualization improvements (nested APICv---a nice optimization),
     usual round of emulation fixes.

     There is also a new option to reduce latency of the TSC deadline
     timer in the guest; this needs to be tuned manually.

     Some commits are common between this pull and Catalin's; I see you
     have already included his tree.

  Powerpc:
     Nothing yet.

     The KVM/PPC changes will come in through the PPC maintainers,
     because I haven't received them yet and I might end up being
     offline for some part of next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (130 commits)
  KVM: ia64: drop kvm.h from installed user headers
  KVM: x86: fix build with !CONFIG_SMP
  KVM: x86: emulate: correct page fault error code for NoWrite instructions
  KVM: Disable compat ioctl for s390
  KVM: s390: add cpu model support
  KVM: s390: use facilities and cpu_id per KVM
  KVM: s390/CPACF: Choose crypto control block format
  s390/kernel: Update /proc/sysinfo file with Extended Name and UUID
  KVM: s390: reenable LPP facility
  KVM: s390: floating irqs: fix user triggerable endless loop
  kvm: add halt_poll_ns module parameter
  kvm: remove KVM_MMIO_SIZE
  KVM: MIPS: Don't leak FPU/DSP to guest
  KVM: MIPS: Disable HTW while in guest
  KVM: nVMX: Enable nested posted interrupt processing
  KVM: nVMX: Enable nested virtual interrupt delivery
  KVM: nVMX: Enable nested apic register virtualization
  KVM: nVMX: Make nested control MSRs per-cpu
  KVM: nVMX: Enable nested virtualize x2apic mode
  KVM: nVMX: Prepare for using hardware MSR bitmap
  ...

Merge tag 'for-f2fs-3.20' of git://git./linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "Major changes are to:
   - add f2fs_io_tracer and F2FS_IOC_GETVERSION
   - fix wrong acl assignment from parent
   - fix accessing wrong data blocks
   - fix wrong condition check for f2fs_sync_fs
   - align start block address for direct_io
   - add and refactor the readahead flows of FS metadata
   - refactor atomic and volatile write policies

  But most of patches are for clean-ups and minor bug fixes.  Some of
  them refactor old code too"

* tag 'for-f2fs-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (64 commits)
  f2fs: use spinlock for segmap_lock instead of rwlock
  f2fs: fix accessing wrong indexed data blocks
  f2fs: avoid variable length array
  f2fs: fix sparse warnings
  f2fs: allocate data blocks in advance for f2fs_direct_IO
  f2fs: introduce macros to convert bytes and blocks in f2fs
  f2fs: call set_buffer_new for get_block
  f2fs: check node page contents all the time
  f2fs: avoid data offset overflow when lseeking huge file
  f2fs: fix to use highmem for pages of newly created directory
  f2fs: introduce a batched trim
  f2fs: merge {invalidate,release}page for meta/node/data pages
  f2fs: show the number of writeback pages in stat
  f2fs: keep PagePrivate during releasepage
  f2fs: should fail mount when trying to recover data on read-only dev
  f2fs: split UMOUNT and FASTBOOT flags
  f2fs: avoid write_checkpoint if f2fs is mounted readonly
  f2fs: support norecovery mount option
  f2fs: fix not to drop mount options when retrying fill_super
  f2fs: merge flags in struct f2fs_sb_info
  ...

Merge branch 'akpm' (patches from Andrew)

Merge third set of updates from Andrew Morton:

 - the rest of MM

   [ This includes getting rid of the numa hinting bits, in favor of
     just generic protnone logic.  Yay.     - Linus ]

 - core kernel

 - procfs

 - some of lib/ (lots of lib/ material this time)

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (104 commits)
  lib/lcm.c: replace include
  lib/percpu_ida.c: remove redundant includes
  lib/strncpy_from_user.c: replace module.h include
  lib/stmp_device.c: replace module.h include
  lib/sort.c: move include inside #if 0
  lib/show_mem.c: remove redundant include
  lib/radix-tree.c: change to simpler include
  lib/plist.c: remove redundant include
  lib/nlattr.c: remove redundant include
  lib/kobject_uevent.c: remove redundant include
  lib/llist.c: remove redundant include
  lib/md5.c: simplify include
  lib/list_sort.c: rearrange includes
  lib/genalloc.c: remove redundant include
  lib/idr.c: remove redundant include
  lib/halfmd4.c: simplify includes
  lib/dynamic_queue_limits.c: simplify includes
  lib/sort.c: use simpler includes
  lib/interval_tree.c: simplify includes
  hexdump: make it return number of bytes placed in buffer
  ...

lib/lcm.c: replace include

We don't need all the stuff kernel.h pulls in; just compiler.h since
export.h doesn't do necessary #includes.  This removes more than 100
dependencies.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/percpu_ida.c: remove redundant includes

These three #includes seem to be completely redundant: Removing them
yields identical objdump -d output for each of {allyes,allno,def}config,
and neither included file end up in the generated dependency file through
some recursive include.  In total, about 50 lines are eliminated from
.percpu.o.cmd.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/strncpy_from_user.c: replace module.h include

strncpy_from_user.c only needs EXPORT_SYMBOL, so just include compiler.h
and export.h instead of the whole module.h machinery.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stmp_device.c: replace module.h include

stmp_device.c only needs EXPORT_SYMBOL, so just include compiler.h and
export.h instead of the whole module.h machinery.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/sort.c: move include inside #if 0

The sort function and its helpers don't do memory allocation, so the
slab.h include is redundant.  Move it inside the #if 0 protecting the
self-test, similar to how it is done in lib/list_sort.c.  This removes
over 450 lines from the generated dependency file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/show_mem.c: remove redundant include

show_mem.c doesn't use anything from nmi.h.  Removing it yields identical
objdump -d output for each of {allyes,allno,def}config and eliminates more
than 100 lines in the dependency file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/radix-tree.c: change to simpler include

The comment helpfully explains why hardirq.h is included, but since
commit 2d4b84739f0a ("hardirq: Split preempt count mask definitions")
in_interrupt() has been provided by preempt_mask.h.  Use that instead,
saving around 40 lines in the generated dependency file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/plist.c: remove redundant include

Removing the include of linux/spinlock.h produces byte-identical output
for {allno,def}config, and identical objdump -d output for allyesconfig.
In the former two cases, more than a 100 lines are eliminated from the
generated dependency file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/nlattr.c: remove redundant include

nlattr.c doesn't seem to rely on anything from netdevice.h.  Removing it
yields identical objdump -d output for each of {allyes,allno,def}config,
and eliminates more than 200 lines from the generated dependency file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/kobject_uevent.c: remove redundant include

The file doesn't seem to use anything from linux/user_namespace.h, and
removing it yields byte-identical object code and strictly fewer
dependencies in the .cmd file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/llist.c: remove redundant include

This file doesn't seem to use anything provided by linux/interrupt.h or
anything recursively included through that.  Removing it produces
byte-identical output, while reducing .llist.o.cmd from 541 to 156 lines.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/md5.c: simplify include

md5.c doesn't use anything from kernel.h, except that that pulls in
compiler.h, which is needed for the export.h to work.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_sort.c: rearrange includes

Memory allocation only happens in the self test, just as random numbers
are only used there.  So move the inclusion of slab.h inside the
CONFIG_TEST_LIST_SORT.

We don't need module.h and all of the stuff it carries with it, so replace
with export.h and compiler.h.  Unfortunately, the ARRAY_SIZE macro from
kernel.h requires the user to ensure bug.h is also included (for
BUILD_BUG_ON_ZERO, used by __must_be_array).  We used to get that through
some maze of nested includes, but just include it explicitly.

linux/string.h is then only included implicitly through
kernel.h->printk.h->dynamic_debug.h, but only if !CONFIG_DYNAMIC_DEBUG, so
just include it explicitly (for memset).

objdump -d says the generated code is the same, and wc -l says that
lib/.list_sort.o.cmd went from 579 to 165 lines.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/genalloc.c: remove redundant include

Removing this include produces byte-identical output, and thus removes a
false dependency.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/idr.c: remove redundant include

idr.c doesn't seem to use anything from hardirq.h (or anything included
from that).  Removing it produces identical objdump -d output, and gives
44 fewer lines in the .idr.o.cmd dependency file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/halfmd4.c: simplify includes

We only need EXPORT_SYMBOL, so compiler.h and export.h suffice.  This
means linux/types.h is no longer implicitly included, so add an include of
uapi/linux/types.h to linux/cryptohash.h for __u32.  Other users of
cryptohash.h cannot be affected, since they must already have been
including uapi/linux/types.h in order for gcc not to complain about
unknown types.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/dynamic_queue_limits.c: simplify includes

The file doesn't use anything from ctype.h.  Instead of module.h, just use
export.h for EXPORT_SYMBOL.  The latter requires the user to include
compiler.h, so do that explicitly instead of relying on some other header
pulling it in.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/sort.c: use simpler includes

sort.c doesn't use facilities from kernel.h, but does use some types
defined in linux/types.h.  Include the latter directly instead of relying
on some other header doing it.  Similarly, include linux/export.h directly
instead of through module.h.  This removes 80 lines from the dependency
file .sort.o.cmd.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/interval_tree.c: simplify includes

The file uses nothing from init.h, and also doesn't need the full module.h
machinery; export.h is sufficient.  The latter requires the user to ensure
compiler.h is included, so do that explicitly instead of relying on some
other header pulling it in.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexdump: make it return number of bytes placed in buffer

This patch makes hexdump return the number of bytes placed in the buffer
excluding trailing NUL.  In the case of overflow it returns the desired
amount of bytes to produce the entire dump.  Thus, it mimics snprintf().

This will be useful for users that would like to repeat with a bigger
buffer.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexdump: do a few calculations ahead

Instead of doing calculations in each case of different groupsize let's do
them beforehand.  While there, change the switch to an if-else-if
construction.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexdump: fix ascii column for the tail of a dump

In the current implementation we have a floating ascii column in the tail
of the dump.

For example, for row size equal to 16 the ascii column as in following
table

group size \ length 8 12 16
1 50 50 50
2 22 32 42
4 20 29 38
8 19 - 36

This patch makes it the same independently of amount of bytes dumped.

The change is safe since all current users, which use ASCII part of the
dump, rely on the group size equal to 1.  The patch doesn't change
behaviour for such group size (see the table above).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexdump: introduce test suite

Test different scenarios of function calls located in lib/hexdump.c.

Currently hex_dump_to_buffer() is only tested and test data is provided
for little endian CPUs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/genalloc.c: fix the end addr check in addr_in_gen_pool()

Since chunk->end_addr is (chunk->start_addr + size - 1), the end address
to compare should be (start + size - 1).

Signed-off-by: Toshi Kikuchi <toshik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string.c: remove strnicmp()

Now that all in-tree users of strnicmp have been converted to
strncasecmp, the wrapper can be removed.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: David Howells <dhowells@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: make the bits parameter of bitmap_remap unsigned

Also, rename bits to nbits. Both changes for consistency with other
bitmap_* functions.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: simplify bitmap_ord_to_pos

Make the return value and the ord and nbits parameters of
bitmap_ord_to_pos unsigned.

Also, simplify the implementation and as a side effect make the result
fully defined, returning nbits for ord >= weight, in analogy with what
find_{first,next}_bit does.  This is a better sentinel than the former
("unofficial") 0.  No current users are affected by this change.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: simplify bitmap_pos_to_ord

The ordinal of a set bit is simply the number of set bits before it;
counting those doesn't need to be done one bit at a time.  While at it,
update the parameters to unsigned int.

It is not completely unthinkable that gcc would see pos as compile-time
constant 0 in one of the uses of bitmap_pos_to_ord.  Since the static
inline frontend bitmap_weight doesn't handle nbits==0 correctly (it would
behave exactly as if nbits==BITS_PER_LONG), use __bitmap_weight.

Alternatively, the last line could be spelled bitmap_weight(buf, pos+1)-1,
but this is simpler.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: change parameters of bitmap_fold to unsigned

Change the sz and nbits parameters of bitmap_fold to unsigned int for
consistency with other bitmap_* functions, and to save another few bytes
in the generated code.

[akpm@linux-foundation.org: fix kerneldoc]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: update bitmap_onto to unsigned

Change the nbits parameter of bitmap_onto to unsigned int for consistency
with other bitmap_* functions.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/cpumask.h: update bitmap wrappers to take unsigned int

Since the various bitmap_* functions now take an unsigned int as nbits
parameter, it makes sense to also update the various wrappers, even though
they're marked as obsolete.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/nodemask.h: update bitmap wrappers to take unsigned int

Since the various bitmap_* functions now take an unsigned int as nbits
parameter, it makes sense to also update the various wrappers.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: more signed->unsigned conversions

For consistency with the other bitmap_* functions, also make the nbits
parameter of bitmap_zero, bitmap_fill and bitmap_copy unsigned.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

libstring_helpers.c:string_get_size(): return void

string_get_size() was documented to return an error, but in fact always
returned 0.  Since the output always fits in 9 bytes, just document that
and let callers do what they do now: pass a small stack buffer and ignore
the return value.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers.c:string_get_size(): use 32 bit arithmetic when possible

The remainder from do_div is always a u32, and after size has been reduced
to be below 1000 (or 1024), it certainly fits in u32.  So both remainder
and sf_cap can be made u32s, the format specifiers can be simplified (%lld
wasn't the right thing to use for _unsigned_ long long anyway), and we can
replace a do_div with an ordinary 32/32 bit division.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers.c:string_get_size(): remove redundant prefixes

While commit 3c9f3681d0b4 ("[SCSI] lib: add generic helper to print
sizes rounded to the correct SI range") says that Z and Y are included
in preparation for 128 bit computers, they just waste .text currently.
If and when we get u128, string_get_size needs updating anyway (and ISO
needs to come up with four more prefixes).

Also there's no need to include and test for the NULL sentinel; once we
reach "E" size is at most 18.  [The test is also wrong; it should be
units_str[units][i+1]; if we've reached NULL we're already doomed.]

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: replace while with do-while in skip_atoi

All callers of skip_atoi have already checked for the first character
being a digit.  In this case, gcc generates simpler code for a do
while-loop.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: improve sanity check in vsnprintf()

On 64 bit, size may very well be huge even if bit 31 happens to be 0.
Somehow it doesn't feel right that one can pass a 5 GiB buffer but not a
3 GiB one.  So cap at INT_MAX as was probably the intention all along.
This is also the made-up value passed by sprintf and vsprintf.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: consume 'p' in format_decode

It seems a little simpler to consume the p from a %p specifier in
format_decode, just as it is done for the surrounding %c, %s and %% cases.

While there, delete a redundant and misplaced comment.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: correct timeout comment, neaten MODULE_PARM_DESC

Neaten the MODULE_PARAM_DESC message.
Use 30 seconds in the comment for the zap console locks timeout.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: remove ancient __FUNCTION__ hack

__FUNCTION__ hasn't been treated as a string literal since gcc 3.4, so
this only helps people who only test-compile using 3.3 (compiler-gcc3.h
barks at anything older than that).  Besides, there are almost no
occurrences of __FUNCTION__ left in the tree.

[akpm@linux-foundation.org: convert remaining __FUNCTION__ references]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: add running_clock for powerpc to prevent spurious softlockup warnings

On POWER8 virtualised kernels the VTB register can be read to have a view
of time that only increases while the guest is running.  This will prevent
guests from seeing time jump if a guest is paused for significant amounts
of time.

On POWER7 and below virtualised kernels stolen time is subtracted from
local_clock as a best effort approximation.  This will not eliminate
spurious warnings in the case of a suspended guest but may reduce the
occurance in the case of softlockups due to host over commit.

Bare metal kernels should avoid reading the VTB as KVM does not restore
sane values when not executing, the approxmation is fine as host kernels
won't observe any stolen time.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Jones <drjones@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: chai wen <chaiw.fnst@cn.fujitsu.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Ben Zhang <benzh@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sched/clock.c: add another clock for use with the soft lockup watchdog

When the hypervisor pauses a virtualised kernel the kernel will observe a
jump in timebase, this can cause spurious messages from the softlockup
detector.

Whilst these messages are harmless, they are accompanied with a stack
trace which causes undue concern and more problematically the stack trace
in the guest has nothing to do with the observed problem and can only be
misleading.

Futhermore, on POWER8 this is completely avoidable with the introduction
of the Virtual Time Base (VTB) register.

This patch (of 2):

This permits the use of arch specific clocks for which virtualised kernels
can use their notion of 'running' time, not the elpased wall time which
will include host execution time.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Jones <drjones@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: chai wen <chaiw.fnst@cn.fujitsu.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Ben Zhang <benzh@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/types.h: Always use unsigned long for pgoff_t

Everybody uses unsigned long for pgoff_t, and no one ever overrode the
definition of pgoff_t.  Keep it that way, and remove the option of
overriding it.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gitignore: ignore tar-install build directory

Have git ignore the Debian directory created when running:
     make tar-pkg / targz-pkg / tarbz2-pkg / tarxz-pkg

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

all arches, signal: move restart_block to struct task_struct

If an attacker can cause a controlled kernel stack overflow, overwriting
the restart block is a very juicy exploit target.  This is because the
restart_block is held in the same memory allocation as the kernel stack.

Moving the restart block to struct task_struct prevents this exploit by
making the restart_block harder to locate.

Note that there are other fields in thread_info that are also easy
targets, at least on some architectures.

It's also a decent simplification, since the restart code is more or less
identical on all architectures.

[james.hogan@imgtec.com: metag: align thread_info::supervisor_stack]
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Miller <davem@davemloft.net>
Acked-by: Richard Weinberger <richard@nod.at>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/array.c: convert to use string_escape_str()

Instead of custom approach let's use string_escape_str() to escape a given
string (task_name in this case).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: proc: task_mmu: show page size in /proc/<pid>/numa_maps

The output of /proc/$pid/numa_maps is in terms of number of pages like
anon=22 or dirty=54.  Here's some output:

  7f4680000000 default file=/hugetlb/bigfile anon=50 dirty=50 N0=50
  7f7659600000 default file=/anon_hugepage\040(deleted) anon=50 dirty=50 N0=50
  7fff8d425000 default stack anon=50 dirty=50 N0=50

Looks like we have a stack and a couple of anonymous hugetlbfs
areas page which both use the same amount of memory.  They don't.

The 'bigfile' uses 1GB pages and takes up ~50GB of space.  The
anon_hugepage uses 2MB pages and takes up ~100MB of space while the stack
uses normal 4k pages.  You can go over to smaps to figure out what the
page size _really_ is with KernelPageSize or MMUPageSize.  But, I think
this is a pretty nasty and counterintuitive interface as it stands.

This patch introduces 'kernelpagesize_kB' line element to
/proc/<pid>/numa_maps report file in order to help identifying the size of
pages that are backing memory areas mapped by a given task.  This is
specially useful to help differentiating between HUGE and GIGANTIC page
backed VMAs.

This patch is based on Dave Hansen's proposal and reviewer's follow-ups
taken from the following dicussion threads:
 * https://lkml.org/lkml/2011/9/21/454
 * https://lkml.org/lkml/2014/12/20/66

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/filesystems/proc.txt: add /proc/pid/numa_maps interface explanation snippet

Add a small section to proc.txt doc in order to document its
/proc/pid/numa_maps interface.  It does not introduce any functional
changes, just documentation.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: proc: use PDE() to get proc_dir_entry

Use the PDE() helper to get proc_dir_entry instead of coding it directly.

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/task_mmu.c: add user-space support for resetting mm->hiwater_rss (peak RSS)

Peak resident size of a process can be reset back to the process's
current rss value by writing "5" to /proc/pid/clear_refs.  The driving
use-case for this would be getting the peak RSS value, which can be
retrieved from the VmHWM field in /proc/pid/status, per benchmark
iteration or test scenario.

[akpm@linux-foundation.org: clarify behaviour in documentation]
Signed-off-by: Petr Cermak <petrcermak@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Primiano Tucci <primiano@chromium.org>
Cc: Petr Cermak <petrcermak@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/frv/mm/extable.c: remove unused function

Remove the function search_one_table() that is not used anywhere.

This was partially found by using a static code analysis program called
cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zsmalloc: add statistics support

Keeping fragmentation of zsmalloc in a low level is our target.  But now
we still need to add the debug code in zsmalloc to get the quantitative
data.

This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the
statistics collection for developers.  Currently only the objects
statatitics in each class are collected.  User can get the information via
debugfs.

     cat /sys/kernel/debug/zsmalloc/zram0/...

For example:

After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem:
 class  size obj_allocated   obj_used pages_used
     0    32             0          0          0
     1    48           256         12          3
     2    64            64         14          1
     3    80            51          7          1
     4    96           128          5          3
     5   112            73          5          2
     6   128            32          4          1
     7   144             0          0          0
     8   160             0          0          0
     9   176             0          0          0
    10   192             0          0          0
    11   208             0          0          0
    12   224             0          0          0
    13   240             0          0          0
    14   256            16          1          1
    15   272            15          9          1
    16   288             0          0          0
    17   304             0          0          0
    18   320             0          0          0
    19   336             0          0          0
    20   352             0          0          0
    21   368             0          0          0
    22   384             0          0          0
    23   400             0          0          0
    24   416             0          0          0
    25   432             0          0          0
    26   448             0          0          0
    27   464             0          0          0
    28   480             0          0          0
    29   496            33          1          4
    30   512             0          0          0
    31   528             0          0          0
    32   544             0          0          0
    33   560             0          0          0
    34   576             0          0          0
    35   592             0          0          0
    36   608             0          0          0
    37   624             0          0          0
    38   640             0          0          0
    40   672             0          0          0
    42   704             0          0          0
    43   720            17          1          3
    44   736             0          0          0
    46   768             0          0          0
    49   816             0          0          0
    51   848             0          0          0
    52   864            14          1          3
    54   896             0          0          0
    57   944            13          1          3
    58   960             0          0          0
    62  1024             4          1          1
    66  1088            15          2          4
    67  1104             0          0          0
    71  1168             0          0          0
    74  1216             0          0          0
    76  1248             0          0          0
    83  1360             3          1          1
    91  1488            11          1          4
    94  1536             0          0          0
   100  1632             5          1          2
   107  1744             0          0          0
   111  1808             9          1          4
   126  2048             4          4          2
   144  2336             7          3          4
   151  2448             0          0          0
   168  2720            15         15         10
   190  3072            28         27         21
   202  3264             0          0          0
   254  4096         36209      36209      36209

 Total               37022      36326      36288

We can calculate the overall fragentation by the last line:
    Total               37022      36326      36288
    (37022 - 36326) / 37022 = 1.87%

Also by analysing objects alocated in every class we know why we got so
low fragmentation: Most of the allocated objects is in <class 254>.  And
there is only 1 page in class 254 zspage.  So, No fragmentation will be
introduced by allocating objs in class 254.

And in future, we can collect other zsmalloc statistics as we need and
analyse them.

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zpool: add name argument to create zpool

Currently the underlay of zpool: zsmalloc/zbud, do not know who creates
them.  There is not a method to let zsmalloc/zbud find which caller they
belong to.

Now we want to add statistics collection in zsmalloc.  We need to name the
debugfs dir for each pool created.  The way suggested by Minchan Kim is to
use a name passed by caller(such as zram) to create the zsmalloc pool.

    /sys/kernel/debug/zsmalloc/zram0

This patch adds an argument `name' to zs_create_pool() and other related
functions.

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: remove request_queue from struct zram

`struct zram' contains both `struct gendisk' and `struct request_queue'.
the latter can be deleted, because zram->disk carries ->queue pointer, and
->queue carries zram pointer:

create_device()
zram->queue->queuedata = zram
zram->disk->queue = zram->queue
zram->disk->private_data = zram

so zram->queue is not needed, we can access all necessary data anyway.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: remove init_lock in zram_make_request

Admin could reset zram during I/O operation going on so we have used
zram->init_lock as read-side lock in I/O path to prevent sudden zram
meta freeing.

However, the init_lock is really troublesome.  We can't do call
zram_meta_alloc under init_lock due to lockdep splat because
zram_rw_page is one of the function under reclaim path and hold it as
read_lock while other places in process context hold it as write_lock.
So, we have used allocation out of the lock to avoid lockdep warn but
it's not good for readability and fainally, I met another lockdep splat
between init_lock and cpu_hotplug from kmem_cache_destroy during working
zsmalloc compaction.  :(

Yes, the ideal is to remove horrible init_lock of zram in rw path.  This
patch removes it in rw path and instead, add atomic refcount for meta
lifetime management and completion to free meta in process context.
It's important to free meta in process context because some of resource
destruction needs mutex lock, which could be held if we releases the
resource in reclaim context so it's deadlock, again.

As a bonus, we could remove init_done check in rw path because
zram_meta_get will do a role for it, instead.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Ganesh Mahendran <opensource.ganesh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: check bd_openers instead of bd_holders

bd_holders is increased only when user open the device file as FMODE_EXCL
so if something opens zram0 as !FMODE_EXCL and request I/O while another
user reset zram0, we can see following warning.

  zram0: detected capacity change from 0 to 64424509440
  Buffer I/O error on dev zram0, logical block 180823, lost async page write
  Buffer I/O error on dev zram0, logical block 180824, lost async page write
  Buffer I/O error on dev zram0, logical block 180825, lost async page write
  Buffer I/O error on dev zram0, logical block 180826, lost async page write
  Buffer I/O error on dev zram0, logical block 180827, lost async page write
  Buffer I/O error on dev zram0, logical block 180828, lost async page write
  Buffer I/O error on dev zram0, logical block 180829, lost async page write
  Buffer I/O error on dev zram0, logical block 180830, lost async page write
  Buffer I/O error on dev zram0, logical block 180831, lost async page write
  Buffer I/O error on dev zram0, logical block 180832, lost async page write
  ------------[ cut here ]------------
  WARNING: CPU: 11 PID: 1996 at fs/block_dev.c:57 __blkdev_put+0x1d7/0x210()
  Modules linked in:
  CPU: 11 PID: 1996 Comm: dd Not tainted 3.19.0-rc6-next-20150202+ #1125
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x45/0x57
    warn_slowpath_common+0x8a/0xc0
    warn_slowpath_null+0x1a/0x20
    __blkdev_put+0x1d7/0x210
    blkdev_put+0x50/0x130
    blkdev_close+0x25/0x30
    __fput+0xdf/0x1e0
    ____fput+0xe/0x10
    task_work_run+0xa7/0xe0
    do_notify_resume+0x49/0x60
    int_signal+0x12/0x17
  ---[ end trace 274fbbc5664827d2 ]---

The warning comes from bdev_write_node in blkdev_put path.

   static void bdev_write_inode(struct inode *inode)
   {
        spin_lock(&inode->i_lock);
        while (inode->i_state & I_DIRTY) {
                spin_unlock(&inode->i_lock);
                WARN_ON_ONCE(write_inode_now(inode, true)); <========= here.
                spin_lock(&inode->i_lock);
        }
        spin_unlock(&inode->i_lock);
   }

The reason is dd process encounters I/O fails due to sudden block device
disappear so in filemap_check_errors in __writeback_single_inode returns
-EIO.

If we check bd_openers instead of bd_holders, we could address the
problem.  When I see the brd, it already have used it rather than
bd_holders so although I'm not a expert of block layer, it seems to be
better.

I can make following warning with below simple script.  In addition, I
added msleep(2000) below set_capacity(zram->disk, 0) after applying your
patch to make window huge(Kudos to Ganesh!)

script:

   echo $((60<<30)) > /sys/block/zram0/disksize
   setsid dd if=/dev/zero of=/dev/zram0 &
   sleep 1
   setsid echo 1 > /sys/block/zram0/reset

Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Ganesh Mahendran <opensource.ganesh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: rework reset and destroy path

We need to return set_capacity(disk, 0) from reset_store() back to
zram_reset_device(), a catch by Ganesh Mahendran.  Potentially, we can
race set_capacity() calls from init and reset paths.

The problem is that zram_reset_device() is also getting called from
zram_exit(), which performs operations in misleading reversed order -- we
first create_device() and then init it, while zram_exit() perform
destroy_device() first and then does zram_reset_device().  This is done to
remove sysfs group before we reset device, so we can continue with device
reset/destruction not being raced by sysfs attr write (f.e.  disksize).

Apart from that, destroy_device() releases zram->disk (but we still have
->disk pointer), so we cannot acces zram->disk in later
zram_reset_device() call, which may cause additional errors in the future.

So, this patch rework and cleanup destroy path.

1) remove several unneeded goto labels in zram_init()

2) factor out zram_init() error path and zram_exit() into
   destroy_devices() function, which takes the number of devices to
   destroy as its argument.

3) remove sysfs group in destroy_devices() first, so we can reorder
   operations -- reset device (as expected) goes before disk destroy and
   queue cleanup.  So we can always access ->disk in zram_reset_device().

4) and, finally, return set_capacity() back under ->init_lock.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: fix umount-reset_store-mount race condition

Ganesh Mahendran was the first one who proposed to use bdev->bd_mutex to
avoid ->bd_holders race condition:

        CPU0                            CPU1
umount /* zram->init_done is true */
reset_store()
bdev->bd_holders == 0                   mount
...                                     zram_make_request()
zram_reset_device()

However, his solution required some considerable amount of code movement,
which we can avoid.

Apart from using bdev->bd_mutex in reset_store(), this patch also
simplifies zram_reset_device().

zram_reset_device() has a bool parameter reset_capacity which tells it
whether disk capacity and itself disk should be reset.  There are two
zram_reset_device() callers:

-- zram_exit() passes reset_capacity=false
-- reset_store() passes reset_capacity=true

So we can move reset_capacity-sensitive work out of zram_reset_device()
and perform it unconditionally in reset_store().  This also lets us drop
reset_capacity parameter from zram_reset_device() and pass zram pointer
only.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: free meta table in zram_meta_free

zram_meta_alloc() and zram_meta_free() are a pair.  In
zram_meta_alloc(), meta table is allocated.  So it it better to free it
in zram_meta_free().

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: clean up zram_meta_alloc()

A trivial cleanup of zram_meta_alloc() error handling.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix negative nr_isolated counts

The vmstat interfaces are good at hiding negative counts (at least when
CONFIG_SMP); but if you peer behind the curtain, you find that
nr_isolated_anon and nr_isolated_file soon go negative, and grow ever
more negative: so they can absorb larger and larger numbers of isolated
pages, yet still appear to be zero.

I'm happy to avoid a congestion_wait() when too_many_isolated() myself;
but I guess it's there for a good reason, in which case we ought to get
too_many_isolated() working again.

The imbalance comes from isolate_migratepages()'s ISOLATE_ABORT case:
putback_movable_pages() decrements the NR_ISOLATED counts, but we forgot
to call acct_isolated() to increment them.

It is possible that the bug whcih this patch fixes could cause OOM kills
when the system still has a lot of reclaimable page cache.

Fixes: edc2ca612496 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org> [3.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hwpoison: drop lru_add_drain_all() in __soft_offline_page()

A race condition starts to be visible in recent mmotm, where a PG_hwpoison
flag is set on a migration source page *before* it's back in buddy page
poo= l.

This is problematic because no page flag is supposed to be set when
freeing (see __free_one_page().) So the user-visible effect of this race
is that it could trigger the BUG_ON() when soft-offlining is called.

The root cause is that we call lru_add_drain_all() to make sure that the
page is in buddy, but that doesn't work because this function just
schedule= s a work item and doesn't wait its completion.
drain_all_pages() does drainin= g directly, so simply dropping
lru_add_drain_all() solves this problem.

Fixes: f15bdfa802bf ("mm/memory-failure.c: fix memory leak in successful soft offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: <stable@vger.kernel.org> [3.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc: fix comment

Add a necessary 'leave'.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: actually remap enough memory

For whatever reason, generic_access_phys() only remaps one page, but
actually allows to access arbitrary size.  It's quite easy to trigger
large reads, like printing out large structure with gdb, which leads to a
crash.  Fix it by remapping correct size.

Fixes: 28b2ee20c7cb ("access_process_vm device memory infrastructure")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/cpuset.c: Mark cpuset_init_current_mems_allowed as __init

The only caller of cpuset_init_current_mems_allowed is the __init
annotated build_all_zonelists_init, so we can also make the former __init.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mm_init.c: mark mminit_loglevel __meminitdata

mminit_loglevel is only referenced from __init and __meminit functions, so
we can mark it __meminitdata.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mm_init.c: park mminit_verify_zonelist as __init

The only caller of mminit_verify_zonelist is build_all_zonelists_init,
which is annotated with __init, so it should be safe to also mark the
former as __init, saving ~400 bytes of .text.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: pull out init code from build_all_zonelists

Pulling the code protected by if (system_state == SYSTEM_BOOTING) into
its own helper allows us to shrink .text a little. This relies on
build_all_zonelists already having a __ref annotation. Add a comment
explaining why so one doesn't have to track it down through git log.

The real saving comes in 3/5, ("mm/mm_init.c: Mark mminit_verify_zonelist
as __init"), where we save about 400 bytes

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/internal.h: don't split printk call in two

All users of mminit_dprintk pass a compile-time constant as level, so this
just makes gcc emit a single printk call instead of two.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do not use mm->nr_pmds on !MMU configurations

mm->nr_pmds doesn't make sense on !MMU configurations

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: cleanup static keys decrement

Move memcg_socket_limit_enabled decrement to tcp_destroy_cgroup (called
from memcg_destroy_kmem -> mem_cgroup_sockets_destroy) and zap a bunch of
wrapper functions.

Although this patch moves static keys decrement from __mem_cgroup_free to
mem_cgroup_css_free, it does not introduce any functional changes, because
the keys are incremented on setting the limit (tcp or kmem), which can
only happen after successful mem_cgroup_css_online.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: stop the isolation when we isolate enough freepage

Currently, freepage isolation in one pageblock doesn't consider how many
freepages we isolate. When I traced flow of compaction, compaction
sometimes isolates more than 256 freepages to migrate just 32 pages.

In this patch, freepage isolation is stopped at the point that we
have more isolated freepage than isolated page for migration. This
results in slowing down free page scanner and make compaction success
rate higher.

stress-highalloc test in mmtests with non movable order 7 allocation shows
increase of compaction success rate.

Compaction success rate (Compaction success * 100 / Compaction stalls, %)
27.13 : 31.82

pfn where both scanners meets on compaction complete
(separate test due to enormous tracepoint buffer)
(zone_start=4096, zone_end=1048576)
586034 : 654378

In fact, I didn't fully understand why this patch results in such good
result. There was a guess that not used freepages are released to pcp list
and on next compaction trial we won't isolate them again so compaction
success rate would decrease. To prevent this effect, I tested with adding
pcp drain code on release_freepages(), but, it has no good effect.

Anyway, this patch reduces waste time to isolate unneeded freepages so
seems reasonable.

Vlastimil said:

: I briefly tried it on top of the pivot-changing series and with order-9
: allocations it reduced free page scanned counter by almost 10%.  No effect
: on success rates (maybe because pivot changing already took care of the
: scanners meeting problem) but the scanning reduction is good on its own.
:
: It also explains why e14c720efdd7 ("mm, compaction: remember position
: within pageblock in free pages scanner") had less than expected
: improvements.  It would only actually stop within pageblock in case of
: async compaction detecting contention.  I guess that's also why the
: infinite loop problem fixed by 1d5bfe1ffb5b affected so relatively few
: people.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: fix wrong order check in compact_finished()

What we want to check here is whether there is highorder freepage in buddy
list of other migratetype in order to steal it without fragmentation.
But, current code just checks cc->order which means allocation request
order.  So, this is wrong.

Without this fix, non-movable synchronous compaction below pageblock order
would not stopped until compaction is complete, because migratetype of
most pageblocks are movable and high order freepage made by compaction is
usually on movable type buddy list.

There is some report related to this bug. See below link.

  http://www.spinics.net/lists/linux-mm/msg81666.html

Although the issued system still has load spike comes from compaction,
this makes that system completely stable and responsive according to his
report.

stress-highalloc test in mmtests with non movable order 7 allocation
doesn't show any notable difference in allocation success rate, but, it
shows more compaction success rate.

Compaction success rate (Compaction success * 100 / Compaction stalls, %)
18.47 : 28.94

Fixes: 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page immediately when it is made available")
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [3.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make dead caches discard free slabs immediately

To speed up further allocations SLUB may store empty slabs in per cpu/node
partial lists instead of freeing them immediately.  This prevents per
memcg caches destruction, because kmem caches created for a memory cgroup
are only destroyed after the last page charged to the cgroup is freed.

To fix this issue, this patch resurrects approach first proposed in [1].
It forbids SLUB to cache empty slabs after the memory cgroup that the
cache belongs to was destroyed.  It is achieved by setting kmem_cache's
cpu_partial and min_partial constants to 0 and tuning put_cpu_partial() so
that it would drop frozen empty slabs immediately if cpu_partial = 0.

The runtime overhead is minimal.  From all the hot functions, we only
touch relatively cold put_cpu_partial(): we make it call
unfreeze_partials() after freezing a slab that belongs to an offline
memory cgroup.  Since slab freezing exists to avoid moving slabs from/to a
partial list on free/alloc, and there can't be allocations from dead
caches, it shouldn't cause any overhead.  We do have to disable preemption
for put_cpu_partial() to achieve that though.

The original patch was accepted well and even merged to the mm tree.
However, I decided to withdraw it due to changes happening to the memcg
core at that time.  I had an idea of introducing per-memcg shrinkers for
kmem caches, but now, as memcg has finally settled down, I do not see it
as an option, because SLUB shrinker would be too costly to call since SLUB
does not keep free slabs on a separate list.  Besides, we currently do not
even call per-memcg shrinkers for offline memcgs.  Overall, it would
introduce much more complexity to both SLUB and memcg than this small
patch.

Regarding to SLAB, there's no problem with it, because it shrinks
per-cpu/node caches periodically.  Thanks to list_lru reparenting, we no
longer keep entries for offline cgroups in per-memcg arrays (such as
memcg_cache_params->memcg_caches), so we do not have to bother if a
per-memcg cache will be shrunk a bit later than it could be.

[1] http://thread.gmane.org/gmane.linux.kernel.mm/118649/focus=118650

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: fix kmem_cache_shrink return value

It is supposed to return 0 if the cache has no remaining objects and 1
otherwise, while currently it always returns 0.  Fix it.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: never fail to shrink cache

SLUB's version of __kmem_cache_shrink() not only removes empty slabs, but
also tries to rearrange the partial lists to place slabs filled up most to
the head to cope with fragmentation.  To achieve that, it allocates a
temporary array of lists used to sort slabs by the number of objects in
use.  If the allocation fails, the whole procedure is aborted.

This is unacceptable for the kernel memory accounting extension of the
memory cgroup, where we want to make sure that kmem_cache_shrink()
successfully discarded empty slabs.  Although the allocation failure is
utterly unlikely with the current page allocator implementation, which
retries GFP_KERNEL allocations of order <= 2 infinitely, it is better not
to rely on that.

This patch therefore makes __kmem_cache_shrink() allocate the array on
stack instead of calling kmalloc, which may fail.  The array size is
chosen to be equal to 32, because most SLUB caches store not more than 32
objects per slab page.  Slab pages with <= 32 free objects are sorted
using the array by the number of objects in use and promoted to the head
of the partial list, while slab pages with > 32 free objects are left in
the end of the list without any ordering imposed on them.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: reparent list_lrus and free kmemcg_id on css offline

Now, the only reason to keep kmemcg_id till css free is list_lru, which
uses it to distribute elements between per-memcg lists.  However, it can
be easily sorted out - we only need to change kmemcg_id of an offline
cgroup to its parent's id, making further list_lru_add()'s add elements to
the parent's list, and then move all elements from the offline cgroup's
list to the one of its parent.  It will work, because a racing
list_lru_del() does not need to know the list it is deleting the element
from.  It can decrement the wrong nr_items counter though, but the ongoing
reparenting will fix it.  After list_lru reparenting is done we are free
to release kmemcg_id saving a valuable slot in a per-memcg array for new
cgroups.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list_lru: add helpers to isolate items

Currently, the isolate callback passed to the list_lru_walk family of
functions is supposed to just delete an item from the list upon returning
LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by
__list_lru_walk_one after the callback returns.  Since the callback is
allowed to drop the lock after removing an item (it has to return
LRU_REMOVED_RETRY then), the nr_items can be less than the actual number
of elements on the list even if we check them under the lock.  This makes
it difficult to move items from one list_lru_one to another, which is
required for per-memcg list_lru reparenting - we can't just splice the
lists, we have to move entries one by one.

This patch therefore introduces helpers that must be used by callback
functions to isolate items instead of raw list_del/list_move.  These are
list_lru_isolate and list_lru_isolate_move.  They not only remove the
entry from the list, but also fix the nr_items counter, making sure
nr_items always reflects the actual number of elements on the list if
checked under the appropriate lock.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: free memcg_caches slot on css offline

We need to look up a kmem_cache in ->memcg_params.memcg_caches arrays only
on allocations, so there is no need to have the array entries set until
css free - we can clear them on css offline.  This will allow us to reuse
array entries more efficiently and avoid costly array relocations.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: use css id for naming per memcg caches

Currently, we use mem_cgroup->kmemcg_id to guarantee kmem_cache->name
uniqueness.  This is correct, because kmemcg_id is only released on css
free after destroying all per memcg caches.

However, I am going to change that and release kmemcg_id on css offline,
because it is not wise to keep it for so long, wasting valuable entries of
memcg_cache_params->memcg_caches arrays.  Therefore, to preserve cache
name uniqueness, let us switch to css->id.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: release css->id after css_free

Currently, we release css->id in css_release_work_fn, right before calling
css_free callback, so that when css_free is called, the id may have
already been reused for a new cgroup.

I am going to use css->id to create unique names for per memcg kmem
caches.  Since kmem caches are destroyed only on css_free, I need css->id
to be freed after css_free was called to avoid name clashes.  This patch
therefore moves css->id removal to css_free_work_fn.  To prevent
css_from_id from returning a pointer to a stale css, it makes
css_release_work_fn replace the css ptr at css_idr:css->id with NULL.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: link memcg caches of the same kind into a list

Sometimes, we need to iterate over all memcg copies of a particular root
kmem cache.  Currently, we use memcg_cache_params->memcg_caches array for
that, because it contains all existing memcg caches.

However, it's a bad practice to keep all caches, including those that
belong to offline cgroups, in this array, because it will be growing
beyond any bounds then.  I'm going to wipe away dead caches from it to
save space.  To still be able to perform iterations over all memcg caches
of the same kind, let us link them into a list.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: embed memcg_cache_params to kmem_cache

Currently, kmem_cache stores a pointer to struct memcg_cache_params
instead of embedding it.  The rationale is to save memory when kmem
accounting is disabled.  However, the memcg_cache_params has shrivelled
drastically since it was first introduced:

* Initially:

struct memcg_cache_params {
bool is_root_cache;
union {
struct kmem_cache *memcg_caches[0];
struct {
struct mem_cgroup *memcg;
struct list_head list;
struct kmem_cache *root_cache;
bool dead;
atomic_t nr_pages;
struct work_struct destroy;
};
};
};

* Now:

struct memcg_cache_params {
bool is_root_cache;
union {
struct {
struct rcu_head rcu_head;
struct kmem_cache *memcg_caches[0];
};
struct {
struct mem_cgroup *memcg;
struct kmem_cache *root_cache;
};
};
};

So the memory saving does not seem to be a clear win anymore.

OTOH, keeping a pointer to memcg_cache_params struct instead of embedding
it results in touching one more cache line on kmem alloc/free hot paths.
Besides, it makes linking kmem caches in a list chained by a field of
struct memcg_cache_params really painful due to a level of indirection,
while I want to make them linked in the following patch.  That said, let
us embed it.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: shrinker: always scan at least one object of each type

In super_cache_scan() we divide the number of objects of particular type
by the total number of objects in order to distribute pressure among As a
result, in some corner cases we can get nr_to_scan=0 even if there are
some objects to reclaim, e.g.  dentries=1, inodes=1, fs_objects=1,
nr_to_scan=1/3=0.

This is unacceptable for per memcg kmem accounting, because this means
that some objects may never get reclaimed after memcg death, preventing it
from being freed.

This patch therefore assures that super_cache_scan() will scan at least
one object of each type if any.

[akpm@linux-foundation.org: add comment]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: make shrinker memcg aware

Now, to make any list_lru-based shrinker memcg aware we should only
initialize its list_lru as memcg aware.  Let's do it for the general FS
shrinker (super_block::s_shrink).

There are other FS-specific shrinkers that use list_lru for storing
objects, such as XFS and GFS2 dquot cache shrinkers, but since they
reclaim objects that are shared among different cgroups, there is no point
making them memcg aware.  It's a big question whether we should account
them to memcg at all.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list_lru: introduce per-memcg lists

There are several FS shrinkers, including super_block::s_shrink, that
keep reclaimable objects in the list_lru structure.  Hence to turn them
to memcg-aware shrinkers, it is enough to make list_lru per-memcg.

This patch does the trick.  It adds an array of lru lists to the
list_lru_node structure (per-node part of the list_lru), one for each
kmem-active memcg, and dispatches every item addition or removal to the
list corresponding to the memcg which the item is accounted to.  So now
the list_lru structure is not just per node, but per node and per memcg.

Not all list_lrus need this feature, so this patch also adds a new
method, list_lru_init_memcg, which initializes a list_lru as memcg
aware.  Otherwise (i.e.  if initialized with old list_lru_init), the
list_lru won't have per memcg lists.

Just like per memcg caches arrays, the arrays of per-memcg lists are
indexed by memcg_cache_id, so we must grow them whenever
memcg_nr_cache_ids is increased.  So we introduce a callback,
memcg_update_all_list_lrus, invoked by memcg_alloc_cache_id if the id
space is full.

The locking is implemented in a manner similar to lruvecs, i.e.  we have
one lock per node that protects all lists (both global and per cgroup) on
the node.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list_lru: organize all list_lrus to list

To make list_lru memcg aware, we need all list_lrus to be kept on a list
protected by a mutex, so that we could sleep while walking over the
list.

Therefore after this change list_lru_destroy may sleep.  Fortunately,
there is only one user that calls it from an atomic context - it's
put_super - and we can easily fix it by calling list_lru_destroy before
put_super in destroy_locked_super - anyway we don't longer need lrus by
that time.

Another point that should be noted is that list_lru_destroy is allowed
to be called on an uninitialized zeroed-out object, in which case it is
a no-op.  Before this patch this was guaranteed by kfree, but now we
need an explicit check there.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>