Florian Fainelli [Wed, 11 May 2011 13:34:14 +0000 (13:34 +0000)]
bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
Florian Fainelli [Wed, 11 May 2011 13:34:05 +0000 (13:34 +0000)]
bcm63xx: Add firmware helpers for T-Home Speedport W 303V
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26877
Florian Fainelli [Wed, 11 May 2011 13:33:50 +0000 (13:33 +0000)]
bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
Florian Fainelli [Wed, 11 May 2011 13:33:45 +0000 (13:33 +0000)]
bcm63xx: Accept any led with power in its name as power led
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
Florian Fainelli [Wed, 11 May 2011 13:33:41 +0000 (13:33 +0000)]
bcm63xx: Decouple Board ID and image name for fixup
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
Florian Fainelli [Wed, 11 May 2011 13:33:34 +0000 (13:33 +0000)]
switch to 2.6.38
SVN-Revision: 26873
Florian Fainelli [Wed, 11 May 2011 13:33:30 +0000 (13:33 +0000)]
add missing 2.6.38 touchscreen config symbols
SVN-Revision: 26872
John Crispin [Mon, 9 May 2011 20:28:04 +0000 (20:28 +0000)]
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26868
John Crispin [Mon, 9 May 2011 15:21:58 +0000 (15:21 +0000)]
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865
Gabor Juhos [Sun, 8 May 2011 21:38:51 +0000 (21:38 +0000)]
ar71xx: populate LED3 on the JA76PF board
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
SVN-Revision: 26862
Gabor Juhos [Sun, 8 May 2011 21:38:49 +0000 (21:38 +0000)]
ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
SVN-Revision: 26861
Gabor Juhos [Sun, 8 May 2011 21:38:48 +0000 (21:38 +0000)]
ar71xx: use phy0tpt trigger for the WLAN LEDs
SVN-Revision: 26860
Gabor Juhos [Sun, 8 May 2011 21:38:46 +0000 (21:38 +0000)]
ar71xx: remove superfluous fifo_cfg overrides
SVN-Revision: 26859
Travis Kemen [Sun, 8 May 2011 17:08:06 +0000 (17:08 +0000)]
ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht
SVN-Revision: 26858
Travis Kemen [Sun, 8 May 2011 17:03:07 +0000 (17:03 +0000)]
Deployment of IPv6 has opened up many more prefixes than just the 2000::/3 space, so a default route of ::/0 is more correct. Thanks Dave Taht
SVN-Revision: 26857
Gabor Juhos [Sun, 8 May 2011 16:32:53 +0000 (16:32 +0000)]
ar71xx: ag71xx: make switch register access atomic
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.
This is easily noticable during an iperf session:
...
[ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec
[ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec
...
[ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec
[ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec
[ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec
SVN-Revision: 26856
Gabor Juhos [Sun, 8 May 2011 13:30:36 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix section mismatch warnings
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.
The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.
SVN-Revision: 26855
Gabor Juhos [Sun, 8 May 2011 13:30:26 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix build error if debugfs is enabled
SVN-Revision: 26854
Jo-Philipp Wich [Sun, 8 May 2011 10:25:58 +0000 (10:25 +0000)]
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
SVN-Revision: 26848
Hauke Mehrtens [Sat, 7 May 2011 12:49:17 +0000 (12:49 +0000)]
brcm47xx: update patches
SVN-Revision: 26846
Gabor Juhos [Sat, 7 May 2011 12:40:34 +0000 (12:40 +0000)]
ar71xx: ag71xx: add debugfs entry for [rt]x_ring
SVN-Revision: 26845
Gabor Juhos [Sat, 7 May 2011 12:40:28 +0000 (12:40 +0000)]
ar71xx: ag71xx: add timestamps to ag71xx_buf
SVN-Revision: 26844
Gabor Juhos [Sat, 7 May 2011 12:40:26 +0000 (12:40 +0000)]
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
SVN-Revision: 26843
Gabor Juhos [Sat, 7 May 2011 12:40:25 +0000 (12:40 +0000)]
ar71xx: ag71xx: use debugfs_remove_recursive
SVN-Revision: 26842
Gabor Juhos [Sat, 7 May 2011 09:23:33 +0000 (09:23 +0000)]
base-files: fix a typo in etc/banner
SVN-Revision: 26841
Gabor Juhos [Sat, 7 May 2011 09:23:32 +0000 (09:23 +0000)]
ar71xx: override wmac device name for the AR934x SoCs
SVN-Revision: 26840
Florian Fainelli [Fri, 6 May 2011 12:37:40 +0000 (12:37 +0000)]
remove useless patches
SVN-Revision: 26837
Florian Fainelli [Fri, 6 May 2011 12:37:36 +0000 (12:37 +0000)]
fill maintainer infos for a couple of targets
SVN-Revision: 26836
Florian Fainelli [Thu, 5 May 2011 16:35:44 +0000 (16:35 +0000)]
update to 2.6.38.2
SVN-Revision: 26833
Florian Fainelli [Thu, 5 May 2011 16:35:40 +0000 (16:35 +0000)]
add missing 2.6.38 symbols
SVN-Revision: 26832
Hauke Mehrtens [Thu, 5 May 2011 14:05:21 +0000 (14:05 +0000)]
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
SVN-Revision: 26829
Hauke Mehrtens [Thu, 5 May 2011 13:18:35 +0000 (13:18 +0000)]
brcm47xx: fix typo in patch
SVN-Revision: 26828
Alexandros C. Couloumbis [Thu, 5 May 2011 07:19:46 +0000 (07:19 +0000)]
linux/ar71xx: add some missing symbols for nand/yaffs targets
SVN-Revision: 26827
Jo-Philipp Wich [Wed, 4 May 2011 14:51:06 +0000 (14:51 +0000)]
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
SVN-Revision: 26822
Felix Fietkau [Wed, 4 May 2011 14:35:35 +0000 (14:35 +0000)]
ath9k: add noise floor calibration fix that should improve stability
SVN-Revision: 26819
Alexandros C. Couloumbis [Wed, 4 May 2011 09:35:06 +0000 (09:35 +0000)]
linux/generic: port yaffs to 2.6.39
SVN-Revision: 26818
Alexandros C. Couloumbis [Wed, 4 May 2011 08:47:00 +0000 (08:47 +0000)]
linux/rb532: use kernel and initramfs tags on image generation
SVN-Revision: 26817
Jo-Philipp Wich [Wed, 4 May 2011 08:19:07 +0000 (08:19 +0000)]
comgt: add tty hotplug remove handling, only iterate each tty once (#9211)
SVN-Revision: 26816
Jo-Philipp Wich [Tue, 3 May 2011 21:25:36 +0000 (21:25 +0000)]
kernel: revert r26814
SVN-Revision: 26815
Jo-Philipp Wich [Tue, 3 May 2011 21:22:43 +0000 (21:22 +0000)]
kernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26814
Jo-Philipp Wich [Tue, 3 May 2011 21:21:05 +0000 (21:21 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26813
Jo-Philipp Wich [Tue, 3 May 2011 21:19:56 +0000 (21:19 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules.
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26812
Jo-Philipp Wich [Tue, 3 May 2011 21:18:12 +0000 (21:18 +0000)]
geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform.
SVN-Revision: 26811
Jo-Philipp Wich [Tue, 3 May 2011 19:45:55 +0000 (19:45 +0000)]
comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
SVN-Revision: 26810
Jo-Philipp Wich [Tue, 3 May 2011 19:39:13 +0000 (19:39 +0000)]
comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)
SVN-Revision: 26809
Jo-Philipp Wich [Tue, 3 May 2011 19:37:59 +0000 (19:37 +0000)]
base-files: cleanup permissions of device files in common hotplug rules (#9211)
SVN-Revision: 26808
Jo-Philipp Wich [Tue, 3 May 2011 19:35:58 +0000 (19:35 +0000)]
hotplug2: introduce tty subsystem events (#9211)
SVN-Revision: 26807
Jo-Philipp Wich [Mon, 2 May 2011 12:55:36 +0000 (12:55 +0000)]
firewall: revert accidential committed changes from r26805
SVN-Revision: 26806
Jo-Philipp Wich [Mon, 2 May 2011 12:54:31 +0000 (12:54 +0000)]
firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):
(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.
(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805
Jo-Philipp Wich [Mon, 2 May 2011 12:53:32 +0000 (12:53 +0000)]
quilt: fix building with dash `test x == x` gives a syntax error with dash (standard in Debian). The modified patch reflects the current upstream: git.savannah.gnu.org/cgit/quilt.git/commit/?id=
38df0b210c3df67f3e784af92232ae1946b98ecd
SVN-Revision: 26804
Florian Fainelli [Mon, 2 May 2011 07:57:25 +0000 (07:57 +0000)]
update to 2.6.38
SVN-Revision: 26803
Felix Fietkau [Mon, 2 May 2011 00:28:30 +0000 (00:28 +0000)]
cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver
SVN-Revision: 26802
Hauke Mehrtens [Sun, 1 May 2011 20:28:35 +0000 (20:28 +0000)]
brcm47xx: add fallback sprom for pci devices without an own sprom.
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
Felix Fietkau [Sun, 1 May 2011 18:23:12 +0000 (18:23 +0000)]
ath9k: add a new fix for signal strength / noise measurements
SVN-Revision: 26798
Felix Fietkau [Sun, 1 May 2011 15:53:56 +0000 (15:53 +0000)]
cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k
SVN-Revision: 26797
Felix Fietkau [Sun, 1 May 2011 01:45:26 +0000 (01:45 +0000)]
mac80211: detect and drop incoming packets with invalid CCMP packet numbers to fix connection hangs on some devices
SVN-Revision: 26795
Jo-Philipp Wich [Fri, 29 Apr 2011 15:11:57 +0000 (15:11 +0000)]
add vim temp files (*~) to .gitignore
SVN-Revision: 26785
Florian Fainelli [Fri, 29 Apr 2011 12:04:17 +0000 (12:04 +0000)]
exclude pktgen for uml target
SVN-Revision: 26781
Felix Fietkau [Thu, 28 Apr 2011 21:27:42 +0000 (21:27 +0000)]
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
SVN-Revision: 26779
Felix Fietkau [Thu, 28 Apr 2011 21:27:37 +0000 (21:27 +0000)]
ar8316: automatically detect whether port4 is used as PHY or as a switch port
SVN-Revision: 26778
Felix Fietkau [Thu, 28 Apr 2011 19:30:49 +0000 (19:30 +0000)]
ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)
SVN-Revision: 26777
Felix Fietkau [Thu, 28 Apr 2011 19:30:43 +0000 (19:30 +0000)]
ar8216: support AR8316 rev 0 devices
SVN-Revision: 26776
Jo-Philipp Wich [Wed, 27 Apr 2011 19:16:35 +0000 (19:16 +0000)]
relayd: map "ipaddr" option to local ip (-L)
SVN-Revision: 26773
Alexandros C. Couloumbis [Wed, 27 Apr 2011 17:18:03 +0000 (17:18 +0000)]
linux/atheros: add 2.6.38 preliminary support
SVN-Revision: 26772
Felix Fietkau [Tue, 26 Apr 2011 23:05:34 +0000 (23:05 +0000)]
madwifi: Fix compilation for 2.6.39
Fix compilation for 2.6.39 by replacing SPIN_LOCK_UNLOCKED with
DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26771
Felix Fietkau [Tue, 26 Apr 2011 23:05:29 +0000 (23:05 +0000)]
swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26770
Felix Fietkau [Tue, 26 Apr 2011 22:23:52 +0000 (22:23 +0000)]
mac80211: backport some more compat fixes, fix compile issues on 2.6.31 and earlier
SVN-Revision: 26768
Felix Fietkau [Tue, 26 Apr 2011 19:33:27 +0000 (19:33 +0000)]
mac80211: broadcast the country IE by default if the country code is configured (#9308)
SVN-Revision: 26765
Felix Fietkau [Tue, 26 Apr 2011 19:16:25 +0000 (19:16 +0000)]
wpa_supplicant: make sure that the common 802.11 code gets linked in (fixes #9299)
SVN-Revision: 26764
Felix Fietkau [Tue, 26 Apr 2011 01:23:23 +0000 (01:23 +0000)]
mac80211: replace the regd revert patch with a proper fix, add some more pending patches
SVN-Revision: 26761
Felix Fietkau [Mon, 25 Apr 2011 18:21:32 +0000 (18:21 +0000)]
ath9k: remove the signal strength fix, it causes a lot of confusion and seems to be just as inaccurate as the original version of the code
SVN-Revision: 26753
Felix Fietkau [Mon, 25 Apr 2011 18:21:28 +0000 (18:21 +0000)]
cfg80211: revert upstream regdomain handling breakage
SVN-Revision: 26752
Felix Fietkau [Sun, 24 Apr 2011 03:34:46 +0000 (03:34 +0000)]
hostapd: fix a few compile errors and warnings
SVN-Revision: 26751
Felix Fietkau [Sat, 23 Apr 2011 21:34:40 +0000 (21:34 +0000)]
mac80211: do rate control updates when the HT configuration changes on an interface
SVN-Revision: 26750
Felix Fietkau [Sat, 23 Apr 2011 21:34:35 +0000 (21:34 +0000)]
hostapd: update to 2011-04-21
SVN-Revision: 26749
Alexandros C. Couloumbis [Thu, 21 Apr 2011 13:18:33 +0000 (13:18 +0000)]
linux/adm5120: update wget2nand script
SVN-Revision: 26748
Alexandros C. Couloumbis [Thu, 21 Apr 2011 12:38:25 +0000 (12:38 +0000)]
linux/ar71xx: update wget2nand script
SVN-Revision: 26747
Alexandros C. Couloumbis [Thu, 21 Apr 2011 11:45:23 +0000 (11:45 +0000)]
linux/ar71xx: add 2.6.38 preliminary support
SVN-Revision: 26746
Hauke Mehrtens [Thu, 21 Apr 2011 09:32:49 +0000 (09:32 +0000)]
mac80211: remove unneeded patch
This was fixed upstream
SVN-Revision: 26745
Felix Fietkau [Wed, 20 Apr 2011 18:14:35 +0000 (18:14 +0000)]
mac80211: update to wireless-testing 2011-04-19, contains several beacon related fixes for ath9k
SVN-Revision: 26744
Jo-Philipp Wich [Wed, 20 Apr 2011 12:08:12 +0000 (12:08 +0000)]
ppp: extend the r26742 change to ip-down too
SVN-Revision: 26743
Jo-Philipp Wich [Wed, 20 Apr 2011 12:02:04 +0000 (12:02 +0000)]
ppp: prevent duplicate hotplug for non uci managed ppp interfaces (#9275)
SVN-Revision: 26742
Jo-Philipp Wich [Wed, 20 Apr 2011 11:49:09 +0000 (11:49 +0000)]
firewall: prevent excessive uci state data aggregation (#9152)
SVN-Revision: 26740
Felix Fietkau [Wed, 20 Apr 2011 02:56:23 +0000 (02:56 +0000)]
busybox: refresh patches
SVN-Revision: 26738
Felix Fietkau [Wed, 20 Apr 2011 02:56:17 +0000 (02:56 +0000)]
busybox: fix issues with static routes and 6rd option parsing (thx, Florian Fuessl)
SVN-Revision: 26737
Hauke Mehrtens [Tue, 19 Apr 2011 21:44:29 +0000 (21:44 +0000)]
mac80211: b43: Expose N-PHY support
Allow enabling of N-PHY support for BCM4321 and BCM4322.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26736
Hauke Mehrtens [Tue, 19 Apr 2011 21:43:19 +0000 (21:43 +0000)]
mac80211: b43: Expose PIO mode fallback
Allow reenabling the PIO mode fallback for b43.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26735
Hauke Mehrtens [Tue, 19 Apr 2011 21:40:29 +0000 (21:40 +0000)]
mac80211: b43: Expose debug option
Allow enabling debug output and debugfs for B43.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26734
Hauke Mehrtens [Tue, 19 Apr 2011 21:40:08 +0000 (21:40 +0000)]
mac80211: b43: Add Firmware 5.10.56.27
Add the 5.10.56.27 firmware option. This includes updating b43-fwcutter to
its newest release 14 and updating the b43-fwsquash.py to recognise rev 16
n phy files.
Also rename the current options from STABLE/EXPERIMENTAL to their version
numbers.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26733
Felix Fietkau [Tue, 19 Apr 2011 15:41:49 +0000 (15:41 +0000)]
hostapd: fix bridge handling for wds stations (#9257)
SVN-Revision: 26724
Felix Fietkau [Tue, 19 Apr 2011 15:41:45 +0000 (15:41 +0000)]
mac80211: re-enable beacon channel hints
SVN-Revision: 26723
Jo-Philipp Wich [Tue, 19 Apr 2011 13:18:39 +0000 (13:18 +0000)]
base-files: fix stale space in eglibc library install section (#9270)
SVN-Revision: 26720
Felix Fietkau [Mon, 18 Apr 2011 09:42:46 +0000 (09:42 +0000)]
librpc: update to a newer version to fix issues with __set_errno
SVN-Revision: 26716
Felix Fietkau [Sun, 17 Apr 2011 21:47:49 +0000 (21:47 +0000)]
uml: fix the kernel config name override
SVN-Revision: 26715
Felix Fietkau [Sun, 17 Apr 2011 21:47:44 +0000 (21:47 +0000)]
use lazy evaluation to allow targets to override kernel config files
SVN-Revision: 26714
Felix Fietkau [Sun, 17 Apr 2011 20:56:14 +0000 (20:56 +0000)]
ath9k: assign a keycache slot per station for unencrypted links to fix powersave frame filtering
SVN-Revision: 26712
Felix Fietkau [Sun, 17 Apr 2011 20:56:10 +0000 (20:56 +0000)]
ath9k: add a patch to show excessive retry counts for single MPDUs
SVN-Revision: 26711
Felix Fietkau [Sun, 17 Apr 2011 18:39:50 +0000 (18:39 +0000)]
x86: remove 2.6.35 patches
SVN-Revision: 26710
Felix Fietkau [Sun, 17 Apr 2011 18:39:46 +0000 (18:39 +0000)]
brcm63xx: remove patches/configs for 2.6.35
SVN-Revision: 26709
Felix Fietkau [Sun, 17 Apr 2011 18:39:42 +0000 (18:39 +0000)]
au1000: remove patches/configs for 2.6.35
SVN-Revision: 26708
projects / openwrt / staging / thess.git / log