Felix Fietkau [Mon, 11 May 2015 09:17:51 +0000 (09:17 +0000)]
image: disable compile target within image builder
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45674
Felix Fietkau [Mon, 11 May 2015 09:17:39 +0000 (09:17 +0000)]
build: disable initramfs build within image builder
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45673
Felix Fietkau [Mon, 11 May 2015 09:08:33 +0000 (09:08 +0000)]
ar71xx: convert tl-wr741nd v1/v2 to new image building code, add infrastructure for building the loader
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45672
Felix Fietkau [Mon, 11 May 2015 09:07:58 +0000 (09:07 +0000)]
build: make initramfs kernel builds depend on the image prepare step
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45671
Felix Fietkau [Mon, 11 May 2015 09:07:21 +0000 (09:07 +0000)]
build: add support for adding a per-device compile step in the new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45670
Felix Fietkau [Sun, 10 May 2015 16:09:58 +0000 (16:09 +0000)]
mtd: remove the warning about read-only caused by size vs. block boundary mismatch
Since the kernel/rootfs split handling was modified 2 years ago by r37283 (
https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins,
users have seen rather scary mtd errors in the log at every boot. The message
ends "-- forcing read-only", which looks a bit error-like. That error has
been mentioned in some forum threads, when users have noticed this message
instead of some actual error.
[ 2.940000] 0x000000070000-0x000000ff0000 : "firmware"
[ 2.970000] 2 netgear-fw partitions found on MTD device firmware
[ 2.970000] 0x000000070000-0x000000188440 : "kernel"
[ 2.980000] mtd: partition "kernel" must either start or end on erase
block boundary or be smaller than an erase block -- forcing read-only
[ 2.990000] 0x000000188440-0x000000ff0000 : "rootfs"
The patch removes the rather useless warning message.
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45669
Felix Fietkau [Sun, 10 May 2015 15:51:19 +0000 (15:51 +0000)]
scripts/feeds: add support for optionally using a full clone of git repositories
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45668
Felix Fietkau [Sun, 10 May 2015 13:54:25 +0000 (13:54 +0000)]
ar71xx: add platform_pre_upgrade for sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45667
Felix Fietkau [Sun, 10 May 2015 13:54:20 +0000 (13:54 +0000)]
toolchain: change default emulation for mips64 (octeon) to n64
fixes several ld errors reported by buildbot:
http://buildbot.openwrt.org:8010/broken_packages/octeon/mdnsresponder/compile.txt
http://buildbot.openwrt.org:8010/broken_packages/octeon/luasocket/compile.txt
http://buildbot.openwrt.org:8010/broken_packages/octeon/luasec/compile.txt
http://buildbot.openwrt.org:8010/broken_packages/octeon/openvswitch/compile.txt
http://buildbot.openwrt.org:8010/broken_packages/octeon/prosody/compile.txt
link error:
ABI is incompatible with that of the selected emulation
found at OE toolchain for bintils 2.22:
http://patchwork.openembedded.org/patch/28033/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45666
Felix Fietkau [Sun, 10 May 2015 13:16:40 +0000 (13:16 +0000)]
kernel: fix regression in backtrace module info change (#19631)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45665
Felix Fietkau [Sun, 10 May 2015 13:16:35 +0000 (13:16 +0000)]
gcc: add some size optimization patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45664
Felix Fietkau [Sun, 10 May 2015 11:47:09 +0000 (11:47 +0000)]
ipq806x: add pcie support to ipq806x based platforms
This change adds PCIe support to IPQ806x based platforms. The driver is
actually cherry-picked from the following LKML thread:
*https://lwn.net/Articles/643086/ (patches 110-111)
We also add here an additional fix to support multiple PCI controllers
on the same platform (patch 112), and to patch the ap148 & dbs149 DTS
files (patch 113).
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45663
Felix Fietkau [Sun, 10 May 2015 11:47:02 +0000 (11:47 +0000)]
ipq806x: add support for zImage kernel
This change enable zImage+appended dtb support in ipq806x kernel
options. The zImage will now be generated as part of the kernel
binaries. Platforms which do not have DT support enabled in U-boot
can now make use of it by generating zImage files and appending dtb
to it.
It is not used yet but it is done as a stepping stone for early IPQ806x
platforms, which did not include DT support in U-boot.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45662
Felix Fietkau [Sun, 10 May 2015 11:46:56 +0000 (11:46 +0000)]
ipq806x: fix boot freeze on zImage kernel
ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
on most ARM architectures. This automatically calculate ZRELADDR by
masking PHYS_OFFSET with 0xf8000000.
On IPQ806x though, the first ~20MB of RAM is reserved for the hardware.
In newer bootloader, when DT is used, this is not a problem, we just
reserve this memory in the device tree. But if the bootloader doesn't
have DT support, then ATAGS have to be used. In this case, the ARM
decompressor will position the kernel in this low mem, which will not be
in the RAM section mapped by the bootloader, which means the kernel will
freeze in the middle of the boot process trying to map the memory.
As a work around, this patch allows disabling AUTO_ZRELADDR when
ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
which don't support device-tree, which is the case on certain early
IPQ806x based designs.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45661
Felix Fietkau [Sun, 10 May 2015 11:46:50 +0000 (11:46 +0000)]
include: make dtb argument optional in MkFIT
As mkits.sh makes the -d argument optional, we'll make this same
argument optional in the MkFIT function as well.
With this change, MkFIT can be used both to generate FIT images with DT,
and without DT.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 45660
Felix Fietkau [Sun, 10 May 2015 11:46:45 +0000 (11:46 +0000)]
build: make device-tree arg optional in mkits.sh
mkits.sh help currently shows dtb file as optional, but generates an
invalid its file when this option is unspecified.
We're fixing this problem by removing the use of the sed command and
just including variables instead.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 45659
Felix Fietkau [Sun, 10 May 2015 11:46:41 +0000 (11:46 +0000)]
generic: add CRYPTO_DEV_QCE option to default config
This option has been added in kernel 3.17. It shows-up only when both
ARCH_QCOM and CRYPTO are enabled. So we'll disable these two by default
to avoid stalling the build when these conditions are met.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45658
Felix Fietkau [Sun, 10 May 2015 11:17:29 +0000 (11:17 +0000)]
build: don't call prereq for any package/symlinks rules
Most of the time, we want to make sure OpenWrt has been configured and
setup before start running make. However, in case of package/symlinks,
forcing prereq as a dependency creates multiple issues:
*when executed on a clean workspace, it will prompt for user input
and open a menuconfig window before executing the feeds command
*the only way around that is to provide a .config. However, the "prereq"
target would then run a "make defconfig", which will remove all the
packages in the .config but from external feeds, as feeds have not been
installed yet.
The only way to currently work around this, is to generate a fake config
by running "make defconfig", then "make package/symlinks", copy the real
config (which at this point disregards the previously generated config),
and run make defconfig again. Something like this:
make defconfig
make package/symlinks
cp real.config .config
make defconfig
This change is removing the need for the first defconfig, making the
process more logical for OpenWrt users using the package/symlinks target.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 45657
Luka Perkov [Sun, 10 May 2015 07:47:04 +0000 (07:47 +0000)]
ar71xx: add status led found on ew-dorin boards
Signed-off-by: Catrinel Catrinescu <cc@80211.de>
SVN-Revision: 45656
Felix Fietkau [Sun, 10 May 2015 00:02:18 +0000 (00:02 +0000)]
kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45655
Felix Fietkau [Sat, 9 May 2015 21:14:46 +0000 (21:14 +0000)]
ppp: remove the persist option, netifd handles reconnects
Significantly reduces reconnect delay
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45654
Felix Fietkau [Sat, 9 May 2015 21:14:41 +0000 (21:14 +0000)]
kernel: fix pppoe disconnect issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45653
Rafał Miłecki [Sat, 9 May 2015 17:38:48 +0000 (17:38 +0000)]
kernel: backport first bcma patches from 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45652
Felix Fietkau [Sat, 9 May 2015 08:58:12 +0000 (08:58 +0000)]
mac80211: apply mesh parameters after starting authsae/wpa_supplicant (#16697)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45651
Felix Fietkau [Fri, 8 May 2015 21:46:51 +0000 (21:46 +0000)]
kernel: add accidentally left out fib trie backport patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45650
Felix Fietkau [Fri, 8 May 2015 21:46:42 +0000 (21:46 +0000)]
mt76: include generated mac80211 config file and add an appropriate define for mesh support (fixes #19474)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45649
Luka Perkov [Fri, 8 May 2015 20:12:42 +0000 (20:12 +0000)]
generic: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45648
Luka Perkov [Fri, 8 May 2015 20:12:39 +0000 (20:12 +0000)]
kirkwood: add support for the Seagate GoflexHome
Add Support for the Seagate GoflexHome <http://wiki.openwrt.org/toh/seagate/goflexhome>
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 45647
Felix Fietkau [Fri, 8 May 2015 14:02:50 +0000 (14:02 +0000)]
ar71xx: allow mktplinkfw calls from the new image code to fail (because of oversized images)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45646
Felix Fietkau [Fri, 8 May 2015 14:02:43 +0000 (14:02 +0000)]
ar71xx: allow tp-link initramfs images to exceed size limits
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45645
Felix Fietkau [Fri, 8 May 2015 14:02:33 +0000 (14:02 +0000)]
mktplinkfw: add flag to ignore size limit (used for initramfs images)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45644
Felix Fietkau [Fri, 8 May 2015 14:02:23 +0000 (14:02 +0000)]
ar71xx/image: move TPLINK-LZMA image to new build code
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties.
v2: set correct DEVICE_PROFILES for all images.
v2: migrate TP-LINK TL-WR710N v2 which was committed after v1.
v2: split very very long line `TARGET_DEVICES +=` into smaller parts
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45643
Felix Fietkau [Fri, 8 May 2015 12:37:26 +0000 (12:37 +0000)]
usign: update to the latest version, use libubox base64 code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45642
Felix Fietkau [Fri, 8 May 2015 12:35:41 +0000 (12:35 +0000)]
libubox: update to the latest version, adds a base64 implementation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45641
Felix Fietkau [Fri, 8 May 2015 12:24:30 +0000 (12:24 +0000)]
ar71xx: do general formatting on wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45640
Felix Fietkau [Fri, 8 May 2015 12:24:23 +0000 (12:24 +0000)]
ar71xx: fix spelling, add copyright on wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45639
Felix Fietkau [Fri, 8 May 2015 12:24:17 +0000 (12:24 +0000)]
ar71xx: add support for Green WAN LED on wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45638
Felix Fietkau [Fri, 8 May 2015 12:24:11 +0000 (12:24 +0000)]
ar71xx: add support for green LAN LEDS for wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45637
Felix Fietkau [Fri, 8 May 2015 12:24:03 +0000 (12:24 +0000)]
ar71xx: fix amber WAN LED setting for wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45636
Felix Fietkau [Fri, 8 May 2015 12:23:58 +0000 (12:23 +0000)]
ar71xx: make WLAN button RFKILL on wnr2000-v4
Users will now be provided with the inherent wifi toggle functionality
of /etc/rc.button/rfkill
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45635
Felix Fietkau [Fri, 8 May 2015 12:23:53 +0000 (12:23 +0000)]
ar71xx: set all buttons to be active_low on wnr2000-v4
Originally pressing a button would trigger a release state and vice-versa,
as observed from hotplug.d.
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45634
Felix Fietkau [Fri, 8 May 2015 12:23:45 +0000 (12:23 +0000)]
ar71xx: fix ethernet on wnr2000-v4
Most people report broken ethernet with upstream. Last year, user "franz.flasch"
authored a working mach-file. His patch is outdated so I modernized it. Original
patch and user commentary on page 1:
https://forum.openwrt.org/viewtopic.php?pid=260861#p260861
I have figured out what the critical differences are between the two that caused
upstream ethernet to break.
1) Both ath79_init_mac() functions calls must be invocated before any GMAC init
2) must init GMAC0 before GMAC1
That was enough to get upstream to function, but I wanted to enjoy my confidence
having tested franz's patch for a week sucessfully, so I put his whole
function in, which only features more differences in order of function calls.
An expert should consider these changes, which could pose potential bugs/issues:
1) No longer using the flag AR934X_ETH_CFG_SW_PHY_SWAP in the
ath79_setup_ar934x_eth_cfg() call.
2) Possible consequence of no longer explicitly setting ethernet duplex/speed.
Review: With this patch, my ethernet and wireless works.
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45633
Felix Fietkau [Fri, 8 May 2015 12:23:40 +0000 (12:23 +0000)]
ar71xx: track the correct WAN interface on wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45632
Felix Fietkau [Fri, 8 May 2015 12:23:35 +0000 (12:23 +0000)]
ar71xx: fix LAN portmasks on wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45631
Felix Fietkau [Fri, 8 May 2015 12:23:27 +0000 (12:23 +0000)]
ar71xx: use a common naming scheme for LEDS on wnr2000-v4
It is common that the router provider be used rather than product name.
One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
SVN-Revision: 45630
Imre Kaloz [Fri, 8 May 2015 12:12:20 +0000 (12:12 +0000)]
mvebu: add xhci phy support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45629
Imre Kaloz [Fri, 8 May 2015 12:09:26 +0000 (12:09 +0000)]
tools: host/include/getline.h: fix FreeBSD 8.0+ support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45628
Luka Perkov [Fri, 8 May 2015 10:45:26 +0000 (10:45 +0000)]
ar71xx: make art partition read only on 16MB ew-dorin board
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45627
Felix Fietkau [Fri, 8 May 2015 10:44:19 +0000 (10:44 +0000)]
netifd-dhcp: supply parameters to user-script
hand over parameters to user-script e.g. $1=deconfig
Signed-off-by: Leon George <leon@georgemail.de>
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 45626
Felix Fietkau [Fri, 8 May 2015 10:44:08 +0000 (10:44 +0000)]
trace-cmd: update to 2.4.2
fixes compile error:
(observed w. target arm64, all kernel build opts enabled)
error: call to '__open_missing_mode' declared with attribute
error: open with O_CREAT in second argument needs 3 arguments
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45625
Felix Fietkau [Fri, 8 May 2015 10:43:55 +0000 (10:43 +0000)]
ar71xx: fix 82_patch_ath10k
It has been broken since the new ath10k firmware introduced in r44656.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 45624
Felix Fietkau [Fri, 8 May 2015 10:43:48 +0000 (10:43 +0000)]
ustream-ssl: correct year in PKG_VERSION string
ustream-ssl: correct the year in the PKG_VERSION string, as both r45157 and
r45441 left the old year 2014 there. For a casual user it may seem that the
current code is from April 2014, although
a4ca61527236e89eb9efb782fd9bfd04796144e3 is from April 2015.
http://nbd.name/gitweb.cgi?p=ustream-ssl.git;a=commit;h=
a4ca61527236e89eb9efb782fd9bfd04796144e3
https://dev.openwrt.org/changeset/45441/
https://dev.openwrt.org/changeset/45157/
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45623
Felix Fietkau [Wed, 6 May 2015 10:19:22 +0000 (10:19 +0000)]
kernel: backport upstream usbnet fix (fixes #19455)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45621
Felix Fietkau [Wed, 6 May 2015 09:45:39 +0000 (09:45 +0000)]
hostapd: fix remote denial of service vulnerability in WMM action frame parsing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45619
Rafał Miłecki [Wed, 6 May 2015 05:54:19 +0000 (05:54 +0000)]
brcm47xx: fix regression in NVRAM support for WGT634U
We were calculating wrong offset, NVRAM wasn't found and OpenWrt didn't
boot.
Fixes: 9019803 ("brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45618
Felix Fietkau [Wed, 6 May 2015 00:59:41 +0000 (00:59 +0000)]
iptables: disable unused xml support to save some space
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45617
Felix Fietkau [Wed, 6 May 2015 00:59:36 +0000 (00:59 +0000)]
hostapd: enable 802.11w only for the full variants
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45616
Felix Fietkau [Wed, 6 May 2015 00:59:28 +0000 (00:59 +0000)]
uboot-envtools: disable AES support, reduces code size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45615
Felix Fietkau [Tue, 5 May 2015 21:16:13 +0000 (21:16 +0000)]
build: enable package list signing by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45614
Steven Barth [Tue, 5 May 2015 13:22:41 +0000 (13:22 +0000)]
firewall: Allow IGMP and MLD input on WAN
The WAN port should at least respond to IGMP and MLD queries as
otherwise a snooping bridge/switch might drop traffic.
RFC4890 recommends to leave IGMP and MLD unfiltered as they are always
link-scoped anyways.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
SVN-Revision: 45613
Steven Barth [Tue, 5 May 2015 13:22:33 +0000 (13:22 +0000)]
netsupport: l2tp-ip: only depend on IPv6 if IPv6 support is enabled
Before r45593 kmod-l2tp-ip did not depend on kmod-ipv6.
With r45593 support for L2TP IPv6 encapsulation was added and
included in the kmod-l2tp-ip package. This change also
added the dependency to kmod-ipv6 to kmod-l2tp-ip, regardless
of whether the user chose to generally include IPv6 support
or not.
Change this so L2TP over IPv6 and the resulting dependency
to kmod-ipv6 is only included in kmod-l2tp-ip if IPv6 support
is enabled.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45612
Jo-Philipp Wich [Tue, 5 May 2015 11:00:53 +0000 (11:00 +0000)]
procd: fix uid/gid changing for service instances
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45611
Felix Fietkau [Tue, 5 May 2015 10:14:04 +0000 (10:14 +0000)]
polarssl: include PKG_RELEASE in ABI_VERSION
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45610
Felix Fietkau [Tue, 5 May 2015 10:12:49 +0000 (10:12 +0000)]
curl: replace polarssl run-time version check with a compile-time one
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45609
Felix Fietkau [Tue, 5 May 2015 10:09:16 +0000 (10:09 +0000)]
openvpn: replace polarssl run-time version check with a compile-time one
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45608
Felix Fietkau [Tue, 5 May 2015 10:00:49 +0000 (10:00 +0000)]
polarssl: disable runtime version checks to save some space
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45607
Felix Fietkau [Tue, 5 May 2015 10:00:36 +0000 (10:00 +0000)]
polarssl: disable an unused random number generator
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45606
Imre Kaloz [Mon, 4 May 2015 13:22:54 +0000 (13:22 +0000)]
tools/pkg-config: fix compile on musl hosts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45605
Imre Kaloz [Mon, 4 May 2015 13:22:36 +0000 (13:22 +0000)]
tools/autoconf: fix compile on musl hosts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45604
Imre Kaloz [Mon, 4 May 2015 13:22:17 +0000 (13:22 +0000)]
tools/sed: fix compile on musl hosts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45603
Jo-Philipp Wich [Mon, 4 May 2015 08:49:21 +0000 (08:49 +0000)]
openvpn: disable CBC record splitting in PolarSSL/mbedTLS (#19101)
OpenVPN assumes that its control channel messages are sent and received
unfragmented, this assumption is broken when CBC record splitting is
enabled in mbedTLS.
The record splitting is intended as countermeasure against BEAST attacks
which do not apply to OpenVPN, therefore we simply disable it until
upstream OpenVPN gains the ability to process fragmented control
messages.
Disabling the splitting also works around a (not remotely triggerable)
segmentation fault in mbedTLS.
References:
* https://dev.openwrt.org/ticket/19101
* https://community.openvpn.net/openvpn/ticket/524
* https://github.com/ARMmbed/mbedtls/pull/185
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45602
Imre Kaloz [Sun, 3 May 2015 18:04:46 +0000 (18:04 +0000)]
generic/4.0: update to 4.0.1
Also refresh one patch.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45601
Felix Fietkau [Sun, 3 May 2015 18:04:27 +0000 (18:04 +0000)]
base-files: fix logic error in led default handling (patch from #19593)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45600
Imre Kaloz [Sun, 3 May 2015 18:00:47 +0000 (18:00 +0000)]
mpc85xx: replace WDR4900 uci-defaults ethernet MAC address hack with DTS entry
This also changes the MAC address to one of the adresses actually used by the
stock firmware on one of the ethernet interfaces.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45599
Imre Kaloz [Sun, 3 May 2015 17:59:46 +0000 (17:59 +0000)]
mpc85xx: gianfar: add mtd-mac-address support
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45598
Imre Kaloz [Sun, 3 May 2015 17:58:45 +0000 (17:58 +0000)]
mpc85xx: move newly created files from patch files to files directory
This will make these files much more maintainable.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45597
Imre Kaloz [Sun, 3 May 2015 17:56:32 +0000 (17:56 +0000)]
The ability to read MAC addresses from MTD is useful for other targets besides ramips and lantiq as well.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45596
Steven Barth [Sun, 3 May 2015 11:19:42 +0000 (11:19 +0000)]
nettle: bump to 3.1.1
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45595
Steven Barth [Sat, 2 May 2015 07:44:55 +0000 (07:44 +0000)]
dhcp: add option specifying overriding custom-routes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45594
Steven Barth [Sat, 2 May 2015 07:44:47 +0000 (07:44 +0000)]
netsupport: package L2TPv3 over IPv6 as well
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45593
Jo-Philipp Wich [Fri, 1 May 2015 17:23:15 +0000 (17:23 +0000)]
env: allow passing a commit message on save
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45592
Jo-Philipp Wich [Fri, 1 May 2015 16:18:25 +0000 (16:18 +0000)]
make-ext4fs: avoid using libc internal declarations
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45591
Steven Barth [Thu, 30 Apr 2015 12:43:46 +0000 (12:43 +0000)]
map: shorten autogenerated sub-interface names to account for limits
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45590
Luka Perkov [Wed, 29 Apr 2015 20:04:46 +0000 (20:04 +0000)]
ar71xx: fix leds and gpio on wpj344
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45589
Luka Perkov [Wed, 29 Apr 2015 13:52:34 +0000 (13:52 +0000)]
ar71xx: fix sysupgrade for compex-wpj344
Moved board to the right magic case.
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 45588
Steven Barth [Wed, 29 Apr 2015 07:19:24 +0000 (07:19 +0000)]
dnsmasq: bump to 2.73rc7
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45587
Steven Barth [Tue, 28 Apr 2015 14:58:54 +0000 (14:58 +0000)]
odhcpd: Remove prefix class config option as not supported anymore by odhcpd
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45586
Steven Barth [Tue, 28 Apr 2015 14:57:52 +0000 (14:57 +0000)]
odhcp6c: Fix white space errors
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45585
Jonas Gorski [Tue, 28 Apr 2015 13:31:08 +0000 (13:31 +0000)]
kernel: disable INET_LRO by default
INET_LRO deprecated and there are exactly two drivers using it, neither
being included in any of the targets enabling INET_LRO. At the same time
both drivers needing it select it.
So just disable it for everyone.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45584
Jonas Gorski [Mon, 27 Apr 2015 11:06:05 +0000 (11:06 +0000)]
brcm63xx: fix bcm6348 ext irqc compatible name
This was a remnant of an old version.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45583
Jonas Gorski [Mon, 27 Apr 2015 11:06:00 +0000 (11:06 +0000)]
brcm63xx: fix bcm3368.dtsi typo.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45582
Felix Fietkau [Sat, 25 Apr 2015 12:39:02 +0000 (12:39 +0000)]
sdk: filter out CONFIG_SIGNED_PACKAGES for generated config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45581
Felix Fietkau [Sat, 25 Apr 2015 10:47:18 +0000 (10:47 +0000)]
kernel: implement RENAME_EXCHANGE support for jffs2 - overlayfs requires it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45580
Rafał Miłecki [Fri, 24 Apr 2015 15:38:38 +0000 (15:38 +0000)]
Revert "nvram: increase NVRAM size to 64 KiB"
This reverts commit
ff84c27a281bc19df19bc62ee8688cca5586f6e3.
This tool has really broken size handling (many values hardcoded), it
crashes right now in case of NVRAM not filling whole MTD partition.
Conflicts:
package/utils/nvram/src/nvram.h
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45579
Rafał Miłecki [Fri, 24 Apr 2015 14:28:57 +0000 (14:28 +0000)]
nvram: fix regression in finding NVRAM beginning
The loop was giving up too early as it never expected NVRAM smaller
than 0x10000.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45578
Rafał Miłecki [Fri, 24 Apr 2015 10:53:11 +0000 (10:53 +0000)]
mac80211: backport brcmfmac to support multiple devices NVRAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45577
Rafał Miłecki [Fri, 24 Apr 2015 10:45:33 +0000 (10:45 +0000)]
mac80211: update brcmfmac to the wireless-drivers-next-for-davem-2015-04-09
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45576
Rafał Miłecki [Fri, 24 Apr 2015 07:47:25 +0000 (07:47 +0000)]
bcm53xx: sort ports from NVRAM entries before matching them
Some devices have unsorted ports which may lead to broken config.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45575
Florian Fainelli [Thu, 23 Apr 2015 22:31:36 +0000 (22:31 +0000)]
netlogic: copy initramfs image to $(BIN_DIR)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45574
Rafał Miłecki [Thu, 23 Apr 2015 19:11:11 +0000 (19:11 +0000)]
kernel: backport rest of bgmac patches to 4.0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45573
projects / openwrt / staging / kaloz.git / log