staging: fsl-mc: Move DPBP out of staging

Move the source files out of staging into their final locations:
- dpbp.c goes to drivers/bus/fsl-mc/, next to the core infrastructure
- dpbp-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next
  to the other internally used APIs
- dpbp.h gets merged into include/linux/fsl/mc.h, exposing the public
  API

Update references in the dpaa2-eth staging driver.

DPBP stands for Data Path Buffer Pool - you can read more about the
object in Documentation/networking/dpaa2/overview.rst

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: irda: remove the irda network stack and drivers

No one has publicly stepped up to maintain this broken codebase for
devices that no one uses anymore, so let's just drop the whole thing.

If someone really wants/needs it, we can revert this and they can fix
the code up to work properly.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: Remove comments inside code

Remove comments inbetween code as in this case.

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: Use lib80211 to support TKIP

Custom TKIP decryption replaced with lib80211 implementation.
MIC check use lib80211 too.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Remove vchiq_queue_bulk_{transmit,receive}.

These are dead code, including in the downstream Raspberry Pi tree.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Mark the "DT bindings" job done.

Now we just need to get the other drivers merged and finish the style
cleanups/garbage collecting so we can get out of staging.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: bcm2835: Add VCHIQ node to the Raspberry Pi boards. (v3)

The VCHIQ firmware communication channel operates in parallel with our
other mailbox-based channel.  This is the communication channel that
exposes the firmware's media decode/encode and ISP interfaces.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com> (v2)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: soc: Add a binding for the Broadcom VCHIQ services. (v3)

The VCHIQ communication channel can be provided by BCM283x and Capri
SoCs, to communicate with the VPU-side OS services.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Remove cache-line-size property (v3)

It's been tempting to replace this with (L1) cache_line_size(), but
that's really not what the value is about.  It's about coordinating
the condition for the pagelist fragment behavior between the two
sides.  However, the property was not accepted for the upstream DT
binding, so we have to use the firmware's fallback value.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ccree: remove ccree staging driver copy

The ccree driver is now in the cryptodev tree, so remove it from
drivers/staging as it's no longer needed here.

Based on a patch from Gilad, but the mailing list didn't like it :(

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Replace "firmware" node with a compatible lookup.

This was requested by Rob Herring in DT bindings review.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: rtw_cmd: remove unnecessary initialization

Clean up checkpatch error:
ERROR: do not initialise globals to 0

Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char issue in handle_scan_done()

Fix 'line over 80 characters' issue found by checkpatch.pl script in
handle_scan_done().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename variables using camelCase in handle_rcvd_gnrl_async_info()

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename WILC_HostIf_PackStaParam to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename variables prefix using datatype 'u8'

Rename variables with datatype 'u8' in their name to follow the linux
coding style.

Renamed following variables:
u8abort_running_scan
pu8Buffer
pu8keybuf
pu8msa
u8remain_on_chan_flag

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 character in handle_disconnect()

Refactor handle_disconnect() to avoid line over 80 characters issue
reported by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in handle_connect()

Fix 'line over 80 characters' issue reported by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in handle_scan()

Fix 'line over 80 character' issue reported by checkpatch.pl script in
handle_scan().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename label 'ERRORHANDLER' to avoid uppercase name

Cleanup patch to avoid use of uppercase for label names, to follow linux
coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strConnectInfo to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrHostIFconnectAttr to avoid camelCase issue

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in cfg_scan_result()

Refactor cfg_scan_result() API to avoid 'line over 80 chars' issue
reported by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pJoinParams to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in mgmt_tx_cancel_wait()

Fix 'line over 80 char' issue found in checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char for cfg parse RX and TX function

Fix 'line over 80 characters' issue found by checkpatch.pl script. Moved
the common code from wilc_wfi_cfg_parse_tx_action() &
wilc_wfi_cfg_parse_rx_action() to new function to avoid checkpatch issue.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in get_key() & set_default_key()

Fix 'line over 80 characters' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in change_virtual_intf()

Fix 'line over 80 char' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8ScanChanList to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename CfgScanResult to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrNetworkInfo to avoid camelCase

Fix 'Avoid camleCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strHiddenNetwork to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Add unicode support to the speakup_dummy driver

This extends spk_io_ops with a synth_out_unicode which takes a u16 character
instead of just a byte, and extends spk_ttyio to implement it to emit
utf-8. spk_do_catch_up_unicode can then be introduced to benefit from
synth_out_unicode, and speakup_dummy made to use spk_do_catch_up_unicode instead
of spk_do_catch_up.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci6208: remove redundant initialization of 'val'

Variable 'val' is initialized with a value that is never read, it is
updated with a new value again after intitialization. Remove the
redundant initialization and move the declaration and assignment into
the scope of the for-loop.

Cleans up clang warning:
drivers/staging/comedi/drivers/adl_pci6208.c:61:15: warning: Value
stored to 'val' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: replace custom rotation operations in favour of the kernel ones

This patch replaces custom ROR32 and ROL32 macros for the ones included in
bitops header of the linux kernel.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fid: avoid false-positive uninitialized variable warning

One of Neil's recent cleanups apparently has led the code to get
to a state where gcc tracks the 'seqnr' variable just enough to
see that it is sometimes initialized in seq_client_alloc_seq(),
but not enough that it can prove this initialization to be reliable
before the use of that variable:

drivers/staging/lustre/lustre/fid/fid_request.c: In function 'seq_client_alloc_fid':
drivers/staging/lustre/lustre/fid/fid_request.c:245:22: error: 'seqnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The code seems to be otherwise correct, and I could not come
up with a good way to simplify it further, so this adds a fake
initialization to shut up that warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: use module_name() macro for debug printf

We now allow lustre to be built when CONFIG_MODULES is disabled,
but that causes a build failure:

In file included from drivers/staging/lustre/include/linux/libcfs/libcfs.h:42,
                 from drivers/staging/lustre/lustre/obdclass/lu_object.c:44:
drivers/staging/lustre/lustre/obdclass/lu_object.c: In function 'lu_context_key_degister':
drivers/staging/lustre/lustre/obdclass/lu_object.c:1410:51: error: dereferencing pointer to incomplete type 'struct module'

This particular case can be avoided by using the module_name()
macro that was designed exactly to handle printing the name of
a module in all configurations.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.17b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for IIO in the 4.17 cycle

The uptick in staging cleanup is partly due to GSoC Applications
process being underway and one of Daniel's tasks being to try
cleaning up an IIO driver to move out of staging.
Naturally there is some normal staging cleanup progress in here
as well.

New device support
* Microchip mcp4018
  - New driver supproting MCP4017, MCP4018 and MCP4019 digital pots.
* On Semiconductor lv0104cs
  - New driver to support this ambient light sensor.

Cleanup
* axp20x_adc
  - remove a !! in favour of clear ternary operator.
* ad2s1210 (staging cleanup)
  - Reorganise to avoid ending a line with [
  - Remove some unnecessary defines.
  - Remove unsed variable.
* ad5380
  - Replace magic 0 with IIO_CHAN_INFO_RAW
* ad5764
  - Replace magic 0 with IIO_CHA_INFO_RAW
* ad7150 (staging cleanup)
  - Align arguements with parenthesis.
* ad7152 (staging cleanup)
  - Align arguements.
* ad7746 (staging cleanup)
  - Align arguements.
* ad7816
  - Remove pointless void pointer cast.
* ade7753
  - Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing
    checkpatch (this macro didn't really help anyway).  Also drop the
    macro from the meter.h header.
* ade7754 (staging cleanup)
  - Add names to funciton definition arguements.
  - Align arguements with open parenthesis where possible.
* ade7758 (staging cleanup)
  - Remove __func__ from dev_dbg statements as provided by dynamic
    debug anyway.
  - Align arguements with open parenthesis where possible.
* ade7759 (staging cleanup)
  - Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing
    checkpatch.
* adis16201 (staging cleanup)
  - Headers in alphabetical order.
  - Blank lines before returns.
* adis16209 (staging cleanup)
  - Headers in alphabetical order
  - Change some definition names to make them more meaningful (2 rounds
    of this).
  - Add explicit _REG prefix to register names to make them
    obviously different from fields within those registers.
  - Remove some superflous comments and group definitions better.
  - Use a switch statement to make it semantically obvious that we
    only have two options (rather than an unlimited 'else').
  - Use sign_extent32 instead of open coding.
* adt7316 (staging cleanup)
  - Move an export next to symbol.
* bmc150
  - drop redundant __func__ in dynamic debug.
* ccs811
  - Rename varaible to better reflect what it does.
* cros_ec
  - Reduce sampling frequency before suspending to avoid preventing
    suspend.
* dummy
  - Correct whitespace in Kconfig.
  - Add extra description in Kconfig.
* ds1803
  - Remove a VLA which we always know is 2 long.
* hid-sensor-accel
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-gyro
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-light
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-magn
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* lm3533
  - Replace magic number 0 by IIO_CHAN_INFO_RAW
* mlx90632
  - Squash a smatch warning - no runtime effect.
* stm32_dfsdm:
  - Cleanup the dt bindings.
* sx9500
  - Add GPIO ACPI mapping table to behave correctly when firmware
    doesn't provide the mapping.
* tsl2x7x (staging cleanup)
  - Fix the proximity sensor functionality.
  - Remove platform data provided power functions.  There are much
    better ways to do this these days.
  - Introduce some common functions to avoid various repititions.
  - Stop using mutex_trylock when mutex_lock and wait a bit is fine.
  - Improve error handling in various places.
  - Drop some 'Camel case' (which wasn't actually strickly camel case
    but was a bit odd.
  - Drop some _available sysfs attributes for things that don't exist
    (for particular supported parts).

staging: fsl-dpaa2/eth: allow the driver to compile multi-arch

Drop dependency on ARCH_LAYERSCAPE (which in turn depends on ARM64),
thus allowing this driver to compile on all architectures supported
by the fsl-mc bus driver.

This was compile tested on:
 - powerpc (corenet_basic_defconfig, ppc64_defconfig)
 - x86 (i386_defconfig, x86_64_defconfig, needs CONFIG_OF)
 - arm64 (defconfig)

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/eth: Use __leXX types where needed

One MC command structure got away with using uXX fields instead
of __leXX. Fix it.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:ad2s1210: Remove old_data from ad2s1210_state

The variable old_data is a bool type, which only receives the value
'true' in the function ad2s1210_config_write and ad2s1210_config_read.
There is no other use for this variable. This patch removes old_data
from the ad2s1210_state and from all the function that use it.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ad2s1210: Remove unused #define directive

This patch removes some #define directives not used in the code.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ad2s1210: Remove end of line with '['

This patch fixes the checkpatch.pl check:

iio/resolver/ad2s1210.c:202: CHECK: Lines should not end with a '['

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ad7150: Align arguments to match open parenthesis

This fixes the following checkpatch.pl CHECK: Alignment should match
open parenthesis

Signed-off-by: Tom Lebreux <tomlebreux@cock.li>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ad7152: Align arguments to match open parenthesis

This patch fixes checkpatch.pl CHECK for alignment.

Signed-off-by: Tom Lebreux <tomlebreux@cock.li>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: potentiometer: mcp4018: driver for Microchip digital potentiometers

Add support for Microchip digital potentiometers and rheostats
MCP4017, MCP4018, MCP4019

They all have one wiper with 128 steps and come in 5, 10, 50 and 100 kOhm
variations.

Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22147a.pdf

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: ad7746: Adjust arguments to match open parenthesis

This patch clears all checkpatch.pl CHECKS, about alignment not matching
open parenthesis, whenever it is possible without going beyond 80 columns.

Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adt7316: Move symbol export to definition

This patch clears the following checkpatch.pl warning:

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL_GPL(adt7316_pm_ops);

Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: potentiometer: ds1803: Remove VLA usage

In preparation to enabling -Wvla, remove VLA usage and replace it
with fixed a fixed length array and therefore, prevent potential
stack overflow attacks.

Fixed as a part of the discussion to remove all VLAs from the kernel:
https://lkml.org/lkml/2018/3/7/621

Cc: keescook@chromium.org
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: make proximity sensor function correctly

The bits for setting up the proximity diode were not setup correctly and
this was causing the proximity sensor to not function correctly. This
patch sets up the correct bit mask in tsl2x7x_chip_on() based on what
the data sheet expects. From page 35 of the TSL2771 data sheet:
https://ams.com/eng/content/download/250264/976045/file/TSL2771_DS000105_3-00.pdf

- Bits 0-1 is the ALS gain control
- Bits 2-3 is reserved (The proximity gain control on other tsl2x7x chips)
- Bits 4-5 is the proximity diode select
- Bits 6-7 is the LED drive strength

tsl2x7x_chip_on() had the power and diode hardcoded, so these are
extracted out into the settings so that these fields can be configured
in the platform data.

The default prox_gain is changed from 1 (2X gain) to 0 (1X gain) since
the proximity gain control on the TSL2771, TMD2771, and other chips have
these fields listed as reserved, and to write 0 into those bits.

Verified that the proximity sensor now works correctly on a TSL2771
hooked up to a Raspberry Pi 2.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: remove unnecessary sysfs attribute

The tsl2771 and tmd2771 devices create the
in_proximity0_calibscale_available sysfs attribute. These two particular
devices do not support changing the proximity gain value on the
chip so this patch removes that sysfs attribute. As expected, these two
devices already did not create the IIO_CHAN_INFO_CALIBSCALE channel and
proximity0_calibrate sysfs attribute.

Page 38 of the tsl2772 data sheet shows that the proximity gain can be
adjusted with bits 2-3 on the control register:
https://ams.com/eng/content/download/291503/1066377/file/TSL2772_DS000181_2-00.pdf

Page 35 of the tsl2771 and tmd2771 data sheets shows that bits 2-3 on
the control register are reserved and changing the proximity gain is
not supported:
https://ams.com/eng/content/download/250264/976045/file/TSL2771_DS000105_3-00.pdf
https://ams.com/eng/content/download/250283/976077/file/TMD2771_DS000177_2-00.pdf

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: add missing error checks

The functions in_illuminance0_calibrate_store() and
in_illuminance0_lux_table_store() did not have complete error handling
in place. This patch adds the missing error handling.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: add error handling to tsl2x7x_prox_cal()

tsl2x7x_prox_cal() did not have any error checks. This patch adds
the missing error handling and ensures that any errors are reported to
user space via in_proximity0_calibrate_store().

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: correct 'Avoid CamelCase' warning from checkpatch

The statP and calP variables triggered an 'Avoid CamelCase' warning
from checkpatch.pl. This patch renames these variables to stat and cal
to fix this warning.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: correctly return errors in tsl2x7x_get_prox()

Not all errors that occurred in tsl2x7x_get_prox() were correctly
reported in the return value. This patch changes the error handling
so that errors are now returned properly.

Note that the ret variable is from the call to tsl2x7x_read_status(),
and it already has the correct error check. The -EINVAL error code is
for an unexpected value in the register.

This patch also corrects an unnecessary word wrap in the call to
le16_to_cpup() while changes are being made to this code.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: convert mutex_trylock() to mutex_lock()

The driver uses mutex_lock() and mutex_trylock() in several places.
Convert the mutex_trylock() to mutex_lock() for consistency with other
IIO light drivers in mainline.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: add common function for writing to the control register

There were four places where the same chunk of code was used to write
to the control register. This patch creates a common function
tsl2x7x_write_control_reg() to reduce duplicate code.

The function tsl2x7x_chip_off() did not correctly return an error
code so this patch also corrects that issue.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: add common function for reading chip status

There were three places where the same chunk of code was used to read
the chip status. This patch creates a common function
tsl2x7x_read_status() to reduce duplicate code. This patch also corrects
tsl2x7x_event_handler() to properly check for an error after reading the
chip status.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: add common function for clearing interrupts

There were three places where the same chunk of code was used to clear
interrupts. This patch creates a common function
tsl2x7x_clear_interrupts() to reduce duplicate code.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: remove power functions from tsl2X7X_platform_data

The tsl2X7X_platform_data structure contains the platform_power,
power_on, and power_off function pointers. These power management
functions should not be in the platform data. These functions were
likely used before the regulator framework was put in place. There are
no users of these functions in the mainline kernel.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: fsl-mc/dpio: Add missing argument identifier

When running checkpatch over the DPIO code the following warning
is reported:

WARNING: function definition argument 'struct dpaa2_io_notification_ctx *' should also have an identifier name

Add the missing identifier.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Fix incorrect masking

In qbman_swp_alt_fq_state(), we need to mask the fqid value
before converting it to little endian, otherwise we write a
wrong value to hardware when running in big endian mode.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Use __leXX types where needed

Structures that are mapped to hardware registers should explicitly
specify the expected endianness for fields larger than 1 byte.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Fix cast truncate warning

Sparse reports the following warning:
drivers/staging/fsl-mc/include/dpaa2-fd.h:421:30:
warning: cast truncates bits from constant value (ffff7fff becomes 7fff)

Fix this by explicitly masking the value with 0xffff.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Replace printk() with more standardize output format.

printk() is the raw way to print output and should be avoided.

For drivers with defined "struct device object", dev_*macro() is
prefer and for "struct netdevice object", netdev_*macro() is prefer over
dev_*macro() to standardize the output format within the subsystem.

If no "struct device object" is defined prefer pr_*macro() over printk().

This patch Replace printk having a log level with the appropriate output
format according to the order of preference.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Fix incorrect cast

Move the cast in dpaa2_sg_get_addr() to the right place.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use __func__ instead of function name

Replace occurrence of the function name in a string by reference to
__func__, to improve robustness and to conform to the Linux kernel coding
style. Issue found using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix typo in comment

Fix typo in the words 'transmitted' and 'failure' in the comment. Issue
found using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Reviewed-by: Vaishali Thakkar <vthakkar@vaishalithakkar.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: Remove unnecessary usage of BUG_ON().

There is no need for the calls to BUG_ON() in this driver, which are
used to check if mbo or mbo->context are NULL; mbo is never NULL, and
if mbo->context is NULL it would have already been dereferenced and
oopsed before reaching the BUG_ON().

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove VLA usage

The kernel would like to have all stack VLA usage removed[1]. This switches
to a simple kasprintf() instead, and in the process fixes an off-by-one
between the allocation and the sprintf (allocation did not include NULL
byte in calculation).

[1] https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: adis16209: Use sign_extend32 function

Use sign_extend32 function instead of manually coding
it.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Adjust a switch statement

Adjust a switch block to explicitly match channels and
return -EINVAL as default case which makes the code
semantically more clear.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Change some macro names

Make some of the macro names according to the names
given in the datasheet of the adis16209 driver.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Remove and add some comments and group the definitions

Remove some unnecessay comments and group the control
register and register field macros together.
Some of the register names does not make it's puporse
very clear and hence, add some comments for more
information.
Also there are certain unit based comments which are not
providing sufficient information, so expand those comments.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Add a blank space before returns

Adding a blank space before/after some returns improves readability.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Prefer alphabetical sequence of header files

Arrange header files in alphabetical sequence to improve readability.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Replace occurrences of magic number 0 by IIO_CHAN_INFO_RAW

Usually, functions responsible for reading raw data typically relies on
values from iio_chan_info_enum to correctly identify the type of data to
be read. There is a set of a device driver that uses the magic number 0
instead of IIO_CHAN_INFO_RAW. This patch improves the readability by
replaces the magic number 0 for the appropriate IIO_CHAN_INFO_RAW in six
devices driver in the IIO subsystem.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:meter: Aligns open parenthesis

This patch fixes the checkpatch.pl checks:

staging/iio/meter/ade7854-spi.c:19: CHECK: Alignment should match open
parenthesis
staging/iio/meter/ade7854-spi.c:44: CHECK: Alignment should match open
parenthesis
staging/iio/meter/ade7854-spi.c:70: CHECK: Alignment should match open
parenthesis
staging/iio/meter/ade7854-spi.c:97: CHECK: Alignment should match open
parenthesis
staging/iio/meter/ade7854-spi.c:125: CHECK: Alignment should match open
parenthesis

...

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:meter: Remove unused macro IIO_DEV_ATTR_CH_OFF

This patch removes the macro IIO_DEV_ATTR_CH_OFF. The macro
IIO_DEV_ATTR_CH_OFF is not required, due to the replace of it by the
direct use of IIO_DEVICE_ATTR in files staging/iio/meter/ade7759.c and
staging/iio/meter/ade7753.c.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:meter: Replaces IIO_DEV_ATTR_CH_OFF by IIO_DEVICE_ATTR

The macro IIO_DEV_ATTR_CH_OFF is a wrapper for IIO_DEVICE_ATTR, with a
tiny change in the name definition. This extra macro does not improve
the readability and also creates some checkpatch errors.

This patch fixes the checkpatch.pl errors:

staging/iio/meter/ade7753.c:391: ERROR: Use 4 digit octal (0777) not
decimal permissions
staging/iio/meter/ade7753.c:395: ERROR: Use 4 digit octal (0777) not
decimal permissions
staging/iio/meter/ade7759.c:331: ERROR: Use 4 digit octal (0777) not
decimal permissions
staging/iio/meter/ade7759.c:335: ERROR: Use 4 digit octal (0777) not
decimal permissions

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: meter: Remove reduntant __func__ from debug print

dev_dbg includes the function name & line number by default when dynamic
debugging is enabled. Hence__func__ is reduntant here and removed.

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: Remove unnecessary cast on void pointer

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|

- (T*)
  e
)

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: lustre: Remove yield() call

Remove yield() call. In this case it's use is considered broken, since
it is being assumed that yield() will let another process run that will
make the event true.

Signed-off-by: Thomas Avery <tavery321@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for paRamp enum

Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <paRamp>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for Address variables

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <nodeAddress>
  CHECK: Avoid CamelCase: <broadcastAddress>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for address_filtering enum

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <filteringOff>
  CHECK: Avoid CamelCase: <nodeAddress>
  CHECK: Avoid CamelCase: <nodeOrBroadcastAddress>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for afterSyncInterrupt

Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <afterSyncInterrupt>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for flag enum

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <modeSwitchCompleted>
  CHECK: Avoid CamelCase: <readyToReceive>
  CHECK: Avoid CamelCase: <readyToSend>
  CHECK: Avoid CamelCase: <pllLocked>
  CHECK: Avoid CamelCase: <rssiExceededThreshold>
  CHECK: Avoid CamelCase: <syncAddressMatch>
  CHECK: Avoid CamelCase: <packetSent>
  CHECK: Avoid CamelCase: <crcOk>
  CHECK: Avoid CamelCase: <batteryLow>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for packetFormat enum

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <packetFormat>
  CHECK: Avoid CamelCase: <packetLengthFix>
  CHECK: Avoid CamelCase: <packetLengthVar>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "staging: Disable lustre file system for MIPS, SH, and XTENSA"

This reverts commit 16f1eeb660bd2bfd223704ee6350706b39c55a7a.

The reason for this patch was that lustre used copy_from_user_page.
Commit 76133e66b141 ("staging/lustre: Replace jobid acquiring with per
node setting") removed that usage.
So the arch restrictions can go.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: allow monolithic builds

Remove restriction the lustre must be built
as modules.  It now works as a monolithic build.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: move thread creation out of module initialization

When the ptlrpc module is loaded, it starts the pinger thread and
calls LNetNIInit which starts various threads.

We don't need these threads until the module is actually being
used, such as when a lustre filesystem is mounted.

So move the thread creation into new ptlrpc_inc_ref() (modeled on
ptlrpcd_inc_ref()), and call that when needed, such as at mount time.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change sai_thread to sai_task.

Rather than allocating a ptlrpc_thread for the
stat-ahead thread, just use the task_struct provided
by kthreads directly.

As nothing ever waits for the sai_task, it must call do_exit()
directly rather than simply return from the function.
Also it cannot use kthread_should_stop() to know when to stop.

There is one caller which can ask it to stop so we need a simple
signaling mechanism.  I've chosen to set ->sai_task to NULL
when the thread should finish up.  The thread notices this and
cleans up and exits.
lli_sa_lock is used to avoid races between waking up the process
and the process exiting.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove 'ptlrpc_thread usage' for sai_agl_thread

Lustre has a 'struct ptlrpc_thread' which provides
control functionality wrapped around kthreads.
None of the functionality used in statahead.c requires
ptlrcp_thread - it can all be done directly with kthreads.

So discard the ptlrpc_thread and just use a task_struct directly.

One particular change worth noting is that in the current
code, the thread performs some start-up actions and then
signals that it is ready to go.  In the new code, the thread
is first created, then the startup actions are perform, then
the thread is woken up.  This means there is no need to wait
any more than kthread_create() already waits.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unused flag from ptlrpc_thread

SVC_EVENT is no longer used.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: use workqueue for pinger

lustre has a "Pinger" kthread which periodically pings peers
to ensure all hosts are functioning.

This can more easily be done using a work queue.

As maintaining contact with other peers is import for
keeping the filesystem running, and as the filesystem might
be involved in freeing memory, it is safest to have a
separate WQ_MEM_RECLAIM workqueue.

The SVC_EVENT functionality to wake up the thread can be
replaced with mod_delayed_work().

Also use round_jiffies_up_relative() rather than setting a
minimum of 1 second delay.  The PING_INTERVAL is measured in
seconds so this meets the need is allow the workqueue to
keep wakeups synchronized.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: use delayed_work in sec_gc

The garbage collection for security contexts currently
has a dedicated kthread which wakes up every 30 minutes
to discard old garbage.

Replace this with a simple delayed_work item on the
system work queue.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: use delayed_work for pools_recalc

ldlm currenty has a kthread which wakes up every so often
and calls ldlm_pools_recalc().
The thread is started and stopped, but no other external interactions
happen.

This can trivially be replaced by a delayed_work if we have
ldlm_pools_recalc() reschedule the work rather than just report
when to do that.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: use workqueue for zombie management.

obdclass currently maintains two lists of data structures
(imports and exports), and a kthread which will free
anything on either list.  The thread is woken whenever
anything is added to either list.

This is exactly the sort of thing that workqueues exist for.

So discard the zombie kthread and the lists and locks, and
create a single workqueue.  Each obd_import and obd_export
gets a work_struct to attach to this workqueue.

This requires a small change to import_sec_validate_get()
which was testing if an obd_import was on the zombie
list.  This cannot have every safely found it to be
on the list (as it could be freed asynchronously)
so it must be dead code.

We could use system_wq instead of creating a dedicated
zombie_wq, but as we occasionally want to flush all pending
work, it is a little nicer to only have to wait for our own
work items.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: change GFP_NOFS to GFP_KERNEL

These allocations are performed during initialization,
so they don't need GFP_NOFS.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>