git.openwrt.org Git - openwrt/staging/blogic.git/log

be2iscsi: Fix async link event processing

Use only port_link_status only to determine link state change. Only bit
0 is used to get the state. Remove code for processing port_fault.

Fixed get_nic_conf structure definition. Removed rsvd[23] field in
be_cmd_get_nic_conf_resp.

Moved definitions of struct field values below the field.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix to process 25G link speed info from FW

Async link event provides port_speed info. Cache the port_speed info
and use the same to report in ISCSI_HOST_PARAM_PORT_SPEED query.

Removed link status query IOCTL used to do the same.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi_transport_iscsi: Add 25G and 40G speed definition

iscsi_port_speed and iscsi_port_speed_names have new entries for
25Gbps and 40Gbps link speeds.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix IOPOLL implementation

OS not responding when running 2 port traffic on 72 CPUs system.

be2iscsi IRQs gets affined to CPU0 when irqbalancer is disabled.
be_iopoll processing completions in BLOCK_IOPOLL_SOFTIRQ hogged CPU0.

1. Use budget to exit the polling loop. beiscsi_process_cq didn't honour
it.
2. Rearming of EQ is done only after iopoll completes.

[mkp: Fixed up blk_iopoll -> irq_poll transition]

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix return value for MCC completion

Change return value of completed MCC EBUSY to EINVAL.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Add FW config validation

System crash in I+T card personality.

Fix to add validation for ULP in initiator mode, physical port number,
and supported queue, icd, cid counts.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix to handle misconfigured optics events

Log messages for misconfigured transceivers reported by FW.

Register async events that driver handles using MCC_CREATE_EXT ioctl.
Errors messages for faulted/uncertified/unqualified optics are logged.
Added IOCTL to get port_name to be displayed in error message.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix VLAN support for IPv6 network

Configuring VLAN parameters through IPv6 interface was not supported in
driver.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix to remove shutdown entry point

Null pointer dereference in shutdown path after taking dump.

Shutdown path is not needed as FW comes up clean every time during probe
after issuing FUNCTION reset MBOX command.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Added return value check for mgmt_get_all_if_id

Use of mutex_lock_interruptible can return -EINTR, handle and log the
error.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Set mbox timeout to 30s

FW recommended timeout for all mbox command is 30s. Use msleep instead
mdelay to relinquish CPU when polling for mbox completion.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix to synchronize tag allocation using spin_lock

alloc_mcc_tag needs to be done under mcc_lock.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix to use atomic bit operations for tag_state

beiscsi_mccq_compl sets MCC_TAG_STATE_TIMEOUT before setting up
tag_mem_state. be_mcc_compl_process_isr checks for MCC_TAG_STATE_TIMEOUT
first then accesses tag_mem_state which might be still getting populated
in the process context.

Fix: Set MCC_TAG_STATE_TIMEOUT after tag_mem_state is populated.
Removed MCC_TAG_STATE_COMPLETED. When posted its in running state and
the running state is cleared in be_mcc_compl_process_isr. be_mcc_notify
now takes tag argument to set it to running state. Use bit operations
for tag_state. Use barriers before setting the state.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix mbox synchronization replacing spinlock with mutex

This is second part of actual fix for soft lockup.

All mbox cmds issued using BMBX and MCC are synchronized using mutex
mbox_lock instead of spin_lock. Used mutex_lock_interruptible where ever
possible.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

be2iscsi: Fix soft lockup in mgmt_get_all_if_id path using bmbx

We are taking mbox_lock spinlock which disables pre-emption before we
poll for mbox completion. Waiting there with spinlock held in excess of
20s will cause soft lockup.

Actual fix is to change mbox_lock to mutex. The changes are done in
phases. This is the first part.

1. Changed mgmt_get_all_if_id to use MCC where after posting lock is
released.

2. Changed be_mbox_db_ready_wait to busy wait for 12s max and removed
wait_event_timeout. Added error handling code for IO reads.
OPCODE_COMMON_QUERY_FIRMWARE_CONFIG mbox command takes 8s time when
unreachable boot targets configured.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
"Stable bugfixes:
   - Fix nfs_size_to_loff_t
   - NFSv4: Fix a dentry leak on alias use

  Other bugfixes:
   - Don't schedule a layoutreturn if the layout segment can be freed
     immediately.
   - Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
   - rpcrdma_bc_receive_call() should init rq_private_buf.len
   - fix stateid handling for the NFS v4.2 operations
   - pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
   - fix panic in gss_pipe_downcall() in fips mode
   - Fix a race between layoutget and pnfs_destroy_layout
   - Fix a race between layoutget and bulk recalls"

* tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls
  NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout
  auth_gss: fix panic in gss_pipe_downcall() in fips mode
  pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
  nfs4: fix stateid handling for the NFS v4.2 operations
  NFSv4: Fix a dentry leak on alias use
  xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.len
  pNFS: Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
  pNFS: Fix pnfs_mark_matching_lsegs_return()
  nfs: fix nfs_size_to_loff_t

x86: fix SMAP in 32-bit environments

In commit 11f1a4b9755f ("x86: reorganize SMAP handling in user space
accesses") I changed how the stac/clac instructions were generated
around the user space accesses, which then made it possible to do
batched accesses efficiently for user string copies etc.

However, in doing so, I completely spaced out, and didn't even think
about the 32-bit case.  And nobody really even seemed to notice, because
SMAP doesn't even exist until modern Skylake processors, and you'd have
to be crazy to run 32-bit kernels on a modern CPU.

Which brings us to Andy Lutomirski.

He actually tested the 32-bit kernel on new hardware, and noticed that
it doesn't work.  My bad.  The trivial fix is to add the required
uaccess begin/end markers around the raw accesses in <asm/uaccess_32.h>.

I feel a bit bad about this patch, just because that header file really
should be cleaned up to avoid all the duplicated code in it, and this
commit just expands on the problem.  But this just fixes the bug without
any bigger cleanup surgery.

Reported-and-tested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls

Replace another case where the layout 'plh_block_lgets' can trigger
infinite loops in send_layoutget().

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout

If the server reboots while there is a layoutget outstanding, then
the call to pnfs_choose_layoutget_stateid() will fail with an EAGAIN
error, which causes an infinite loop in send_layoutget(). The reason
why we never break out of the loop is that the layout 'plh_block_lgets'
field is never cleared.

Fix is to replace plh_block_lgets with NFS_LAYOUT_INVALID_STID, which
can be reset after a new layoutget.

Fixes: ab7d763e477c5 ("pNFS: Ensure nfs4_layoutget_prepare returns...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Merge tag 'trace-fixes-v4.5-rc5' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Two more small fixes.

  One is by Yang Shi who added a READ_ONCE_NOCHECK() to the scan of the
  stack made by the stack tracer.  As the stack tracer scans the entire
  kernel stack, KASAN triggers seeing it as a "stack out of bounds"
  error.  As the scan is looking at the contents of the stack from
  parent functions.  The NOCHECK() tells KASAN that this is done on
  purpose, and is not some kind of stack overflow.

  The second fix is to the ftrace selftests, to retrieve the PID of
  executed commands from the shell with '$!' and not by parsing 'jobs'"

* tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing, kasan: Silence Kasan warning in check_stack of stack_tracer
  ftracetest: Fix instance test to use proper shell command for pids

Merge tag 'for-linus-4.5-rc5-tag' of git://git./linux/kernel/git/xen/tip

Pull xen bug fixes from David Vrabel:

- Two scsiback fixes (resource leak and spurious warning).

- Fix DMA mapping of compound pages on arm/arm64.

- Fix some pciback regressions in MSI-X handling.

- Fix a pcifront crash due to some uninitialize state.

* tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
  xen/pcifront: Report the errors better.
  xen/pciback: Save the number of MSI-X entries to be copied later.
  xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
  xen: fix potential integer overflow in queue_reply
  xen/arm: correctly handle DMA mapping of compound pages
  xen/scsiback: avoid warnings when adding multiple LUNs to a domain
  xen/scsiback: correct frontend counting

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"Looks like a lot, but mostly driver fixes scattered all over as usual.

  Of note:

   1) Add conditional sched in nf conntrack in cleanup to avoid NMI
      watchdogs.  From Florian Westphal.

   2) Fix deadlock in nfnetlink cttimeout, also from Floarian.

   3) Fix handling of slaves in bonding ARP monitor validation, from Jay
      Vosburgh.

   4) Callers of ip_cmsg_send() are responsible for freeing IP options,
      some were not doing so.  Fix from Eric Dumazet.

   5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT.

   6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot.

   7) bcm7xxx PHY driver bug fixes from Florian Fainelli.

   8) Avoid unaligned accesses to protocol headers wrt.  GRE, from
      Alexander Duyck.

   9) SKB leaks and other problems in arc_emac driver, from Alexander
      Kochetkov.

  10) tcp_v4_inbound_md5_hash() releases listener socket instead of
      request socket on error path, oops.  Fix from Eric Dumazet.

  11) Missing socket release in pppoe_rcv_core() that seems to have
      existed basically forever.  From Guillaume Nault.

  12) Missing slave_dev unregister in dsa_slave_create() error path,
      from Florian Fainelli.

  13) crypto_alloc_hash() never returns NULL, fix return value check in
      __tcp_alloc_md5sig_pool.  From Insu Yun.

  14) Properly expire exception route entries in ipv4, from Xin Long.

  15) Fix races in tcp/dccp listener socket dismantle, from Eric
      Dumazet.

  16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not
      legal.  These drivers modify the SKB on transmit.  From Jiri Benc.

  17) Fix regression in the initialziation of netdev->tx_queue_len.
      From Phil Sutter.

  18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun.

  19) SCTP port hash sizing does not properly ensure that table is a
      power of two in size.  From Neil Horman.

  20) Fix initializing of software copy of MAC address in fmvj18x_cs
      driver, from Ken Kawasaki"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits)
  bnx2x: Fix 84833 phy command handler
  bnx2x: Fix led setting for 84858 phy.
  bnx2x: Correct 84858 PHY fw version
  bnx2x: Fix 84833 RX CRC
  bnx2x: Fix link-forcing for KR2
  net: ethernet: davicom: fix devicetree irq resource
  fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address
  Driver: Vmxnet3: Update Rx ring 2 max size
  net: netcp: rework the code for get/set sw_data in dma desc
  soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
  net: ti: netcp: restore get/set_pad_info() functionality
  MAINTAINERS: Drop myself as xen netback maintainer
  sctp: Fix port hash table size computation
  can: ems_usb: Fix possible tx overflow
  Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
  net: bcmgenet: Fix internal PHY link state
  af_unix: Don't use continue to re-execute unix_stream_read_generic loop
  unix_diag: fix incorrect sign extension in unix_lookup_by_ino
  bnxt_en: Failure to update PHY is not fatal condition.
  bnxt_en: Remove unnecessary call to update PHY settings.
  ...

Merge tag 'hwmon-for-linus-v4.5-rc6' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
"Two fixes headed for stable:

   - Remove an unnecessary speed_index lookup for thermal hook in the
     gpio-fan driver.  The unnecessary speed lookup can hog the system.

   - Handle negative conversion values correctly in the ads1015 driver"

* tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
  hwmon: (ads1015) Handle negative conversion values correctly

Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:
"One ocrdma fix:

   - The new CQ API support was added to ocrdma, but they got the arming
     logic wrong, so without this, transfers eventually fail when they
     fail to arm the interrupt properly under load

  Two related fixes for mlx4:

   - When we added the 64bit extended counters support to the core IB
     code, they forgot to update the RoCE side of the mlx4 driver (the
     IB side they properly updated).

     I debated whether or not to include these patches as they could be
     considered feature enablement patches, but the existing code will
     blindy copy the 32bit counters, whether any counters were requested
     at all (a bug).

     These two patches make it (a) check to see that counters were
     requested and (b) copy the right counters (the 64bit support is
     new, the 32bit is not).  For that reason I went ahead and took
     them"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/mlx4: Add support for the port info class for RoCE ports
  IB/mlx4: Add support for extended counters over RoCE ports
  RDMA/ocrdma: Fix arm logic to align with new cq API

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Some bugfixes from I2C for you:

  A fix for a RuntimePM regression with OMAP, a fix to enable TCO for
  Lewisburg platforms, and a typo fix while we are here"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Adding Intel Lewisburg support for iTCO
  i2c: uniphier: fix typos in error messages
  i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit

Merge tag 'linux-can-fixes-for-4.5-20160221' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-02-21

this is a pull reqeust of one patch for net/master.

The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the
ems_usb driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnx2x-848xx-phy-fixes'

Yuval Mintz says:

====================
bnx2x: Fix 848xx phys

This series contains link-related fixes, mostly for the 848xx phys
[2 patches are for 84833, and 2 patches are for 84858].
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix 84833 phy command handler

Current initialization sequence is lacking, causing some configurations
to fail.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix led setting for 84858 phy.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Correct 84858 PHY fw version

The phy's firmware version isn't being parsed properly as it's
currently parsed like the rest of the 848xx phys.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix 84833 RX CRC

There's a problem in current 84833 phy configuration -
in case 1Gb link is configured and jumbo-sized packets are being
used, device will experience RX crc errors.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix link-forcing for KR2

Currently, when link is using KR2 it cannot be forced to any speed other
than 20g.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.om>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
pull request: bluetooth 2016-02-20

Here's an important patch for 4.5 which fixes potential invalid pointer
access when processing completed Bluetooth HCI commands.

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: davicom: fix devicetree irq resource

The dm9000 driver doesn't work in at least one device-tree
configuration, spitting an error message on irq resource :
[    1.062495] dm9000 8000000.ethernet: insufficient resources
[    1.068439] dm9000 8000000.ethernet: not found (-2).
[    1.073451] dm9000: probe of 8000000.ethernet failed with error -2

The reason behind is that the interrupt might be provided by a gpio
controller, not probed when dm9000 is probed, and needing the probe
deferral mechanism to apply.

Currently, the interrupt is directly taken from resources. This patch
changes this to use the more generic platform_get_irq(), which handles
the deferral.

Moreover, since commit Fixes: 7085a7401ba5 ("drivers: platform: parse
IRQ flags from resources"), the interrupt trigger flags are honored in
platform_get_irq(), so remove the needless code in dm9000.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Marcel Ziswiler <marcel@ziswiler.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Sergei Ianovich <ynvich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address

fix incorrect indexing of dev->dev_addr[] when copying the MAC address
of FMV-J182 at buf[5].

Signed-off-by: Ken Kawasaki <ken_kawasaki@nifty.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver: Vmxnet3: Update Rx ring 2 max size

Device emulation supports max size of 4096.

Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'netcp-fixes'

Murali Karicheri says:

====================
net: ti: netcp: restore get/set_pad_info() functionality

This series fixes a regression and add some improvements for the ease
of maintainance. Incorporated comments against v1.

Changelogs:

v2 : combined 2-3 into one patch as this involves a header change
      fixed a parse warning in 3/4 per comment from Arnd.
      Removed Sign-off from Arnd against 1/4
      added comments in 3/3 to alert on the usage of sw data per review
      comments
v1 : added 2-4 to accomodate feedback received from review
v0 : initial version to fix the regression (From Grygorii)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: netcp: rework the code for get/set sw_data in dma desc

SW data field in descriptor can be used by software to hold private
data for the driver. As there are 4 words available for this purpose,
use separate macros to place it or retrieve the same to/from
descriptors. Also do type cast of data types accordingly.

Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Grygorii Strashko <grygorii.strashko@ti.com>
CC: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data

Rename the pad to sw_data as per description of this field in the hardware
spec(refer sprugr9 from www.ti.com). Latest version of the document is
at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1
Host Packet Descriptor describes this field.

Define and use a constant for the size of sw_data field similar to
other fields in the struct for desc and document the sw_data field
in the header. As the sw_data is not touched by hw, it's type can be
changed to u32.

Rename the helpers to match with the updated dma desc field sw_data.

Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Grygorii Strashko <grygorii.strashko@ti.com>
CC: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: netcp: restore get/set_pad_info() functionality

The commit 899077791403 ("netcp: try to reduce type confusion in
descriptors") introduces a regression in Kernel 4.5-rc1 and it breaks
get/set_pad_info() functionality.

The TI NETCP driver uses pad0 and pad1 fields of knav_dma_desc to
store DMA/MEM buffer pointer and buffer size respectively. And in both
cases for Keystone 2 the pointer type size is 32 bit regardless of
LAPE enabled or not, because CONFIG_ARCH_DMA_ADDR_T_64BIT originally
is not expected to be defined.

Unfortunately, above commit changed buffer's pointers save/restore
code (get/set_pad_info()) and added intermediate conversation to u64
which works incorrectly on 32bit Keystone 2 and causes TI NETCP driver
crash in RX/TX path due to "Unable to handle kernel NULL pointer"
exception. This issue was reported and discussed in [1].

Hence, fix it by partially reverting above commit and restoring
get/set_pad_info() functionality as it was before.

[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95361.html
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
CC: David Laight <David.Laight@ACULAB.COM>
CC: Arnd Bergmann <arnd@arndb.de>
Reported-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Drop myself as xen netback maintainer

Wei has been picking this up for quite a while now.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: Fix port hash table size computation

Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in
its size computation, observing that the current method never guaranteed
that the hashsize (measured in number of entries) would be a power of two,
which the input hash function for that table requires.  The root cause of
the problem is that two values need to be computed (one, the allocation
order of the storage requries, as passed to __get_free_pages, and two the
number of entries for the hash table).  Both need to be ^2, but for
different reasons, and the existing code is simply computing one order
value, and using it as the basis for both, which is wrong (i.e. it assumes
that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not).

To fix this, we change the logic slightly.  We start by computing a goal
allocation order (which is limited by the maximum size hash table we want
to support.  Then we attempt to allocate that size table, decreasing the
order until a successful allocation is made.  Then, with the resultant
successful order we compute the number of buckets that hash table supports,
which we then round down to the nearest power of two, giving us the number
of entries the table actually supports.

I've tested this locally here, using non-debug and spinlock-debug kernels,
and the number of entries in the hashtable consistently work out to be
powers of two in all cases.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
CC: Dmitry Vyukov <dvyukov@google.com>
CC: Vladislav Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

can: ems_usb: Fix possible tx overflow

This patch fixes the problem that more CAN messages could be sent to the
interface as could be send on the CAN bus. This was more likely for slow baud
rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under
heavy TX load this produced another bulk transfer without checking the
free_slots variable and hence caused the overflow in the interface.

Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Linux 4.5-rc5

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"This is unusually large, partly due to the EFI fixes that prevent
  accidental deletion of EFI variables through efivarfs that may brick
  machines.  These fixes are somewhat involved to maintain compatibility
  with existing install methods and other usage modes, while trying to
  turn off the 'rm -rf' bricking vector.

  Other fixes are for large page ioremap()s and for non-temporal
  user-memcpy()s"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix vmalloc_fault() to handle large pages properly
  hpet: Drop stale URLs
  x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
  x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
  lib/ucs2_string: Correct ucs2 -> utf8 conversion
  efi: Add pstore variables to the deletion whitelist
  efi: Make efivarfs entries immutable by default
  efi: Make our variable validation list include the guid
  efi: Do variable name validation tests in utf8
  efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
  lib/ucs2_string: Add ucs2 -> utf8 helper functions

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"A handful of CPU hotplug related fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Plug potential memory leak in CPU_UP_PREPARE
  perf/core: Remove the bogus and dangerous CPU_DOWN_FAILED hotplug state
  perf/core: Remove bogus UP_CANCELED hotplug state
  perf/x86/amd/uncore: Plug reference leak

Merge tag 'powerpc-4.5-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy

* tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/ioda: Set "read" permission when "write" is set
  powerpc/mm: Fix Multi hit ERAT cause by recent THP update
  powerpc/powernv: Fix stale PE primary bus
  powerpc/eeh: Fix stale cached primary bus
  powerpc/pseries: Don't trace hcalls on offline CPUs
  powerpc: Fix dedotify for binutils >= 2.26
  powerpc/book3s_32: Fix build error with checkpoint restart

Merge tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
"A few fixes for drivers, nothing major here.

  Fixes are: iotdma fix to restart channels, new ID for wildcat PCH,
  residue fix for edma, disable irq for non-cyclic in dw"

* tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
  dmaengine: edma: fix residue race for cyclic
  dmaengine: dw: pci: add ID for WildcatPoint PCH
  dmaengine: IOATDMA: fix timer code that continues to restart channels during idle

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk driver fixes from Stephen Boyd:
"An assortment of vendor specific clk drivers fixes, most notably
  fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this
  cycle.

  There's also the random smattering of sparse/checker fixes, a build
  "fix" to get the Tango clk driver to compile because the Kconfig
  symbol was renamed after the fact, and a clk gpio fix for a patch
  mismerge"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits)
  clk: gpio: Really allow an optional clock= DT property
  Revert "clk: qcom: Specify LE device endianness"
  clk: versatile: mask VCO bits before writing
  clk: tegra: super: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warning for pll_m
  clk: tegra: Use definition for pll_u override bit
  clk: tegra: Fix warning caused by pll_u failing to lock
  clk: tegra: Fix clock sources for Tegra210 EMC
  clk: tegra: Add the APB2APE audio clock on Tegra210
  clk: tegra: Add missing of_node_put()
  clk: tegra: Fix PLLE SS coefficients
  clk: tegra: Fix typos around clearing PLLE bits during enable
  clk: tegra: Do not disable PLLE when under hardware control
  clk: tegra: Fix pllx dyn step calculation
  clk: tegra: pll: Fix potential sleeping-while-atomic
  clk: tegra: Fix the misnaming of nvenc from msenc
  clk: tegra: Fix naming of MISC registers
  clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
  clk: scpi: Fix checking return value of platform_device_register_simple()
  ...

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull more drm fixes from Dave Airlie:
"Some more fixes trickled in:

  A bunch of VC4 ones since it's a pretty new driver not much chance of
  regressions, and it fixes GPU resets.

  Also one atomic fix, one set of fixes for a common bug in TTM cleanup,
  and one i915 hotplug fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: use post-decrement in error handling
  drm/atomic: Allow for holes in connector state, v2.
  drm/i915: Fix hpd live status bits for g4x
  drm/vc4: Use runtime PM to power cycle the device when the GPU hangs.
  drm/vc4: Enable runtime PM.
  drm/vc4: Fix spurious GPU resets due to BO reuse.
  drm/vc4: Drop error message on seqno wait timeouts.
  drm/vc4: Fix -ERESTARTSYS error return from BO waits.
  drm/vc4: Return an ERR_PTR from BO creation instead of NULL.
  drm/vc4: Fix the clear color for the first tile rendered.
  drm/vc4: Validate that WAIT_BO padding is cleared.
  drm/radeon: use post-decrement in error handling
  drm/amdgpu: use post-decrement in error handling

kernel/resource.c: fix muxed resource handling in __request_region()

In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released.  A pointer on the conflicting resource is kept.  At wake-up
this pointer is used as a parent to retry to request the region.

A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed).  Another
problem is that the next call to __request_region() fails to detect a
remaining conflict.  The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself.  It is likely
to succeed anyway, even if there is still a conflict.

Instead, the parent of the conflicting resource should be passed to
__request_region().

As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.

Reported-and-tested-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Tested-by: Vincent Donnefort <vdonnefort@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb

In commit 44d271377479 ("Bluetooth: Compress the size of struct
hci_ctrl") we squashed down the size of the structure by using a union
with the assumption that all users would use the flag to determine
whether we had a req_complete or a req_complete_skb.

Unfortunately we had a case in hci_req_cmd_complete() where we weren't
looking at the flag. This can result in a situation where we might be
storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or
vice versa.

During some testing I found at least one case where the function
hci_req_sync_complete() was called improperly because the kernel thought
that it didn't require an SKB. Looking through the stack in kgdb I
found that it was called by hci_event_packet() and that
hci_event_packet() had both of its locals "req_complete" and
"req_complete_skb" pointing to the same place: both to
hci_req_sync_complete().

Let's make sure we always check the flag.

For more details on debugging done, see <http://crbug.com/588288>.

Fixes: 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

net: bcmgenet: Fix internal PHY link state

The PHY link state is not chaged in GENETv2 caused by the previous
commit 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore
interrupt") was set to PHY_IGNORE_INTERRUPT in bcmgenet_mii_probe().

The internal PHY should use phy_mac_interrupt() when not in use
PHY_POLL. The statement for phy_mac_interrupt() has two conditions. The
first condition to check GENET_HAS_MDIO_INTR is not related PHY link
state, so this patch removes it.

Fixes: 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore interrupt")
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Don't use continue to re-execute unix_stream_read_generic loop

The unix_stream_read_generic function tries to use a continue statement
to restart the receive loop after waiting for a message. This may not
work as intended as the caller might use a recvmsg call to peek at
control messages without specifying a message buffer. If this was the
case, the continue will cause the function to return without an error
and without the credential information if the function had to wait for a
message while it had returned with the credentials otherwise. Change to
using goto to restart the loop without checking the condition first in
this case so that credentials are returned either way.

Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

unix_diag: fix incorrect sign extension in unix_lookup_by_ino

The value passed by unix_diag_get_exact to unix_lookup_by_ino has type
__u32, but unix_lookup_by_ino's argument ino has type int, which is not
a problem yet.
However, when ino is compared with sock_i_ino return value of type
unsigned long, ino is sign extended to signed long, and this results
to incorrect comparison on 64-bit architectures for inode numbers
greater than INT_MAX.

This bug was found by strace test suite.

Fixes: 5d3cae8bc39d ("unix_diag: Dumping exact socket core")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-fixes'

Michael Chan says:

====================
bnxt_en: Phy related fixes.

3 small patches to fix PHY related code.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Failure to update PHY is not fatal condition.

If we fail to update the PHY, we should print a warning and continue.
The current code to exit is buggy as it has not freed up the NIC
resources yet.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Remove unnecessary call to update PHY settings.

Fix bnxt_update_phy_setting() to check the correct parameters when
determining whether to update the PHY. Requested line speed/duplex should
only be checked for forced speed mode. This avoids unnecessary link
interruptions when loading the driver.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Poll link at the end of __bnxt_open_nic().

When shutting down the NIC, we shutdown async event processing before
freeing all the rings. If there is a link change event during reset, the
driver may miss it and the link state may be incorrect after the NIC is
re-opened. Poll the link at the end of __bnxt_open_nic() to get the
correct link status.

Signed-off-by Michael Chan <michael.chan@broadcom.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook

Thermal hook gpio_fan_get_cur_state is only interested in knowing
the current speed index that was setup in the system, this is
already available as part of fan_data->speed_index which is always
set by set_fan_speed. Using get_fan_speed_index is useful when we
have no idea about the fan speed configuration (for example during
fan_ctrl_init).

When thermal framework invokes
gpio_fan_get_cur_state=>get_fan_speed_index via gpio_fan_get_cur_state
especially in a polled configuration for thermal governor, we
basically hog the i2c interface to the extent that other functions
fail to get any traffic out :(.

Instead, just provide the last state set in the driver - since the gpio
fan driver is responsible for the fan state immaterial of override, the
fan_data->speed_index should accurately reflect the state.

Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 bugfixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v4.5"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix crashes in dioread_nolock mode
  ext4: fix bh->b_state corruption
  ext4: fix memleak in ext4_readdir()
  ext4: remove unused parameter "newblock" in convert_initialized_extent()
  ext4: don't read blocks from disk after extents being swapped
  ext4: fix potential integer overflow
  ext4: add a line break for proc mb_groups display
  ext4: ioctl: fix erroneous return value
  ext4: fix scheduling in atomic on group checksum failure
  ext4 crypto: move context consistency check to ext4_file_open()
  ext4 crypto: revalidate dentry after adding or removing the key

Merge branch 'for-linus-4.5' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fix from Chris Mason:
"My for-linus-4.5 branch has a btrfs DIO error passing fix.

  I know how much you love DIO, so I'm going to suggest against reading
  it.  We'll follow up with a patch to drop the error arg from
  dio_end_io in the next merge window."

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix direct IO requests not reporting IO error to user space

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
"10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: slab: free kmem_cache_node after destroy sysfs file
  ipc/shm: handle removed segments gracefully in shm_mmap()
  MAINTAINERS: update Kselftest Framework mailing list
  devm_memremap_release(): fix memremap'd addr handling
  mm/hugetlb.c: fix incorrect proc nr_hugepages value
  mm, x86: fix pte_page() crash in gup_pte_range()
  fsnotify: turn fsnotify reaper thread into a workqueue job
  Revert "fsnotify: destroy marks with call_srcu instead of dedicated thread"
  mm: fix regression in remap_file_pages() emulation
  thp, dax: do not try to withdraw pgtable from non-anon VMA

ser_gigaset: use container_of() instead of detour

The purpose of gigaset_device_release() is to kfree() the struct
ser_cardstate that contains our struct device. This is done via a bit of
a detour. First we make our struct device's driver_data point to the
container of our struct ser_cardstate (which is a struct cardstate). In
gigaset_device_release() we then retrieve that driver_data again. And
after that we finally kfree() the struct ser_cardstate that was saved in
the struct cardstate.

All of this can be achieved much easier by using container_of() to get
from our struct device to its container, struct ser_cardstate. Do so.

Note that at the time the detour was implemented commit b8b2c7d845d5
("base/platform: assert that dev_pm_domain callbacks are called
unconditionally") had just entered the tree. That commit disconnected
our platform_device and our platform_driver. These were reconnected
again in v4.5-rc2 through commit 25cad69f21f5 ("base/platform: Fix
platform drivers with no probe callback"). And one of the consequences
of that fix was that it broke the detour via driver_data. That's because
it made __device_release_driver() stop being a NOP for our struct device
and actually do stuff again. One of the things it now does, is setting
our driver_data to NULL. That, in turn, makes it impossible for
gigaset_device_release() to get to our struct cardstate. Which has the
net effect of leaking a struct ser_cardstate at every call of this
driver's tty close() operation. So using container_of() has the
additional benefit of actually working.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-02-18' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
rtlwifi

* fix broken VHT (802.11ac) support, reported by Linus

wlcore

* fix firmware initialisation regression on wl1271

iwlwifi

* fix a race that users reported when we try to load the firmware
  and the hardware rfkill interrupt triggers at the same time
* fix a very visible bug in scheduled scan: the firmware
  doesn't support scheduled scan with no profile configured and
  the supplicant sometimes requests such scheduled scans
* build system fix to be able to link iwlwifi statically into kernel
* firmware name update for 8265
* typo fix in return value
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb3: fix up vpd strings for kstrto*()

The vpd strings are left justified, in a fixed length array, with possible
trailing white space and no NUL. So fix them up before calling kstrto*().

This is a recent regression which causes cxgb3 to fail to load.

Fixes: e72c932 ("cxgb3: Convert simple_strtoul to kstrtox")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lwt: fix rx checksum setting for lwt devices tunneling over ipv6

the commit 35e2d1152b22 ("tunnels: Allow IPv6 UDP checksums to be
correctly controlled.") changed the default xmit checksum setting
for lwt vxlan/geneve ipv6 tunnels, so that now the checksum is not
set into external UDP header.
This commit changes the rx checksum setting for both lwt vxlan/geneve
devices created by openvswitch accordingly, so that lwt over ipv6
tunnel pairs are again able to communicate with default values.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: unlock in error path

tipc_bcast_unlock need to be unlocked in error path.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
Two of the fixes included in this patchset prevent wrong memory
access - it was triggered when removing an object from a list
after it was already free'd due to bad reference counting.
This misbehaviour existed for both the gw_node and the
orig_node_vlan object and has been fixed by Sven Eckelmann.

The last patch fixes our interface feasibility check and prevents
it from looping indefinitely when two net_device objects
reference each other via iflink index (i.e. veth pair), by
Andrew Lunn
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl: RTM_GETNETCONF: fix wrong return value

An error response from a RTM_GETNETCONF request can return the positive
error value EINVAL in the struct nlmsgerr that can mislead userspace.

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: make netdev_for_each_lower_dev safe for device removal

When I used netdev_for_each_lower_dev in commit bad531623253 ("vrf:
remove slave queue and private slave struct") I thought that it acts
like netdev_for_each_lower_private and can be used to remove the current
device from the list while walking, but unfortunately it acts more like
netdev_for_each_lower_private_rcu and doesn't allow it. The difference
is where the "iter" points to, right now it points to the current element
and that makes it impossible to remove it. Change the logic to be
similar to netdev_for_each_lower_private and make it point to the "next"
element so we can safely delete the current one. VRF is the only such
user right now, there's no change for the read-only users.

Here's what can happen now:
[98423.249858] general protection fault: 0000 [#1] SMP
[98423.250175] Modules linked in: vrf bridge(O) stp llc nfsd auth_rpcgss
oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul
crc32_pclmul crc32c_intel ghash_clmulni_intel jitterentropy_rng
sha256_generic hmac drbg ppdev aesni_intel aes_x86_64 glue_helper lrw
gf128mul ablk_helper cryptd evdev serio_raw pcspkr virtio_balloon
parport_pc parport i2c_piix4 i2c_core virtio_console acpi_cpufreq button
9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 sg
virtio_blk virtio_net sr_mod cdrom e1000 ata_generic ehci_pci uhci_hcd
ehci_hcd usbcore usb_common virtio_pci ata_piix libata floppy
virtio_ring virtio scsi_mod [last unloaded: bridge]
[98423.255040] CPU: 1 PID: 14173 Comm: ip Tainted: G           O
4.5.0-rc2+ #81
[98423.255386] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.8.1-20150318_183358- 04/01/2014
[98423.255777] task: ffff8800547f5540 ti: ffff88003428c000 task.ti:
ffff88003428c000
[98423.256123] RIP: 0010:[<ffffffff81514f3e>]  [<ffffffff81514f3e>]
netdev_lower_get_next+0x1e/0x30
[98423.256534] RSP: 0018:ffff88003428f940  EFLAGS: 00010207
[98423.256766] RAX: 0002000100000004 RBX: ffff880054ff9000 RCX:
0000000000000000
[98423.257039] RDX: ffff88003428f8b8 RSI: ffff88003428f950 RDI:
ffff880054ff90c0
[98423.257287] RBP: ffff88003428f940 R08: 0000000000000000 R09:
0000000000000000
[98423.257537] R10: 0000000000000001 R11: 0000000000000000 R12:
ffff88003428f9e0
[98423.257802] R13: ffff880054a5fd00 R14: ffff88003428f970 R15:
0000000000000001
[98423.258055] FS:  00007f3d76881700(0000) GS:ffff88005d000000(0000)
knlGS:0000000000000000
[98423.258418] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[98423.258650] CR2: 00007ffe5951ffa8 CR3: 0000000052077000 CR4:
00000000000406e0
[98423.258902] Stack:
[98423.259075]  ffff88003428f960 ffffffffa0442636 0002000100000004
ffff880054ff9000
[98423.259647]  ffff88003428f9b0 ffffffff81518205 ffff880054ff9000
ffff88003428f978
[98423.260208]  ffff88003428f978 ffff88003428f9e0 ffff88003428f9e0
ffff880035b35f00
[98423.260739] Call Trace:
[98423.260920]  [<ffffffffa0442636>] vrf_dev_uninit+0x76/0xa0 [vrf]
[98423.261156]  [<ffffffff81518205>]
rollback_registered_many+0x205/0x390
[98423.261401]  [<ffffffff815183ec>] unregister_netdevice_many+0x1c/0x70
[98423.261641]  [<ffffffff8153223c>] rtnl_delete_link+0x3c/0x50
[98423.271557]  [<ffffffff815335bb>] rtnl_dellink+0xcb/0x1d0
[98423.271800]  [<ffffffff811cd7da>] ? __inc_zone_state+0x4a/0x90
[98423.272049]  [<ffffffff815337b4>] rtnetlink_rcv_msg+0x84/0x200
[98423.272279]  [<ffffffff810cfe7d>] ? trace_hardirqs_on+0xd/0x10
[98423.272513]  [<ffffffff8153370b>] ? rtnetlink_rcv+0x1b/0x40
[98423.272755]  [<ffffffff81533730>] ? rtnetlink_rcv+0x40/0x40
[98423.272983]  [<ffffffff8155d6e7>] netlink_rcv_skb+0x97/0xb0
[98423.273209]  [<ffffffff8153371a>] rtnetlink_rcv+0x2a/0x40
[98423.273476]  [<ffffffff8155ce8b>] netlink_unicast+0x11b/0x1a0
[98423.273710]  [<ffffffff8155d2f1>] netlink_sendmsg+0x3e1/0x610
[98423.273947]  [<ffffffff814fbc98>] sock_sendmsg+0x38/0x70
[98423.274175]  [<ffffffff814fc253>] ___sys_sendmsg+0x2e3/0x2f0
[98423.274416]  [<ffffffff810d841e>] ? do_raw_spin_unlock+0xbe/0x140
[98423.274658]  [<ffffffff811e1bec>] ? handle_mm_fault+0x26c/0x2210
[98423.274894]  [<ffffffff811e19cd>] ? handle_mm_fault+0x4d/0x2210
[98423.275130]  [<ffffffff81269611>] ? __fget_light+0x91/0xb0
[98423.275365]  [<ffffffff814fcd42>] __sys_sendmsg+0x42/0x80
[98423.275595]  [<ffffffff814fcd92>] SyS_sendmsg+0x12/0x20
[98423.275827]  [<ffffffff81611bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
[98423.276073] Code: c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66
90 48 8b 06 55 48 81 c7 c0 00 00 00 48 89 e5 48 8b 00 48 39 f8 74 09 48
89 06 <48> 8b 40 e8 5d c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66
[98423.279639] RIP  [<ffffffff81514f3e>] netdev_lower_get_next+0x1e/0x30
[98423.279920]  RSP <ffff88003428f940>

CC: David Ahern <dsa@cumulusnetworks.com>
CC: David S. Miller <davem@davemloft.net>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Vlad Yasevich <vyasevic@redhat.com>
Fixes: bad531623253 ("vrf: remove slave queue and private slave struct")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tracing, kasan: Silence Kasan warning in check_stack of stack_tracer

When enabling stack trace via "echo 1 > /proc/sys/kernel/stack_tracer_enabled",
the below KASAN warning is triggered:

BUG: KASAN: stack-out-of-bounds in check_stack+0x344/0x848 at addr ffffffc0689ebab8
Read of size 8 by task ksoftirqd/4/29
page:ffffffbdc3a27ac0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x0()
page dumped because: kasan: bad access detected
CPU: 4 PID: 29 Comm: ksoftirqd/4 Not tainted 4.5.0-rc1 #129
Hardware name: Freescale Layerscape 2085a RDB Board (DT)
Call trace:
[<ffffffc000091300>] dump_backtrace+0x0/0x3a0
[<ffffffc0000916c4>] show_stack+0x24/0x30
[<ffffffc0009bbd78>] dump_stack+0xd8/0x168
[<ffffffc000420bb0>] kasan_report_error+0x6a0/0x920
[<ffffffc000421688>] kasan_report+0x70/0xb8
[<ffffffc00041f7f0>] __asan_load8+0x60/0x78
[<ffffffc0002e05c4>] check_stack+0x344/0x848
[<ffffffc0002e0c8c>] stack_trace_call+0x1c4/0x370
[<ffffffc0002af558>] ftrace_ops_no_ops+0x2c0/0x590
[<ffffffc00009f25c>] ftrace_graph_call+0x0/0x14
[<ffffffc0000881bc>] fpsimd_thread_switch+0x24/0x1e8
[<ffffffc000089864>] __switch_to+0x34/0x218
[<ffffffc0011e089c>] __schedule+0x3ac/0x15b8
[<ffffffc0011e1f6c>] schedule+0x5c/0x178
[<ffffffc0001632a8>] smpboot_thread_fn+0x350/0x960
[<ffffffc00015b518>] kthread+0x1d8/0x2b0
[<ffffffc0000874d0>] ret_from_fork+0x10/0x40
Memory state around the buggy address:
ffffffc0689eb980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 f4 f4 f4
ffffffc0689eba00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffc0689eba80: 00 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00
^
ffffffc0689ebb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0689ebb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

The stacker tracer traverses the whole kernel stack when saving the max stack
trace. It may touch the stack red zones to cause the warning. So, just disable
the instrumentation to silence the warning.

Link: http://lkml.kernel.org/r/1455309960-18930-1-git-send-email-yang.shi@linaro.org
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftracetest: Fix instance test to use proper shell command for pids

The ftracetest instance test used parsing of the "jobs" output to find the
pid of the subshell that is executed previously. But this is not portable to
all major shells that may run these tests. The proper way to get the pid of
the subshell is the shell command "$!". This will return the pid of the
previously executed command. Use that instead, otherwise the test does not
work in all environments.

Link: http://lkml.kernel.org/r/20151211143617.65f4d7a1@gandalf.local.home
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Here are some more arm64 fixes for 4.5.  This has mostly come from
  Yang Shi, who saw some issues under -rt that also affect mainline.
  The rest of it is pretty small, but still worth having.

  We've got an old issue outstanding with valid_user_regs which will
  likely wait until 4.6 (since it would really benefit from some time in
  -next) and another issue with kasan and idle which should be fixed
  next week.

  Apart from that, pretty quiet here (and still no sign of the THP issue
  reported on s390...)

  Summary:

   - Allow EFI stub to use strnlen(), which is required by recent libfdt

   - Avoid smp_processor_id() in preempt context during unwinding

   - Avoid false Kasan warnings during unwinding

   - Ensure early devices are picked up by the IOMMU DMA ops

   - Avoid rebuilding the kernel for the 'install' target

   - Run fixup handlers for alignment faults on userspace access"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: allow the kernel to handle alignment faults on user accesses
  arm64: kbuild: make "make install" not depend on vmlinux
  arm64: dma-mapping: fix handling of devices registered before arch_initcall
  arm64/efi: Make strnlen() available to the EFI namespace
  arm/arm64: crypto: assure that ECB modes don't require an IV
  arm64: make irq_stack_ptr more robust
  arm64: debug: re-enable irqs before sending breakpoint SIGTRAP
  arm64: disable kasan when accessing frame->fp in unwind_frame

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:
"Several bug fixes:

   - There are four different stack tracers, and three of them have
     bugs.  For 4.5 the bugs are fixed and we prepare a cleanup patch
     for the next merge window.

   - Three bug fixes for the dasd driver in regard to parallel access
     volumes and the new max_dev_sectors block device queue limit

   - The irq restore optimization needs a fixup for memcpy_real

   - The diagnose trace code has a conflict with lockdep"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: fix performance drop
  s390/maccess: reduce stnsm instructions
  s390/diag: avoid lockdep recursion
  s390/dasd: fix refcount for PAV reassignment
  s390/dasd: prevent incorrect length error under z/VM after PAV changes
  s390: fix DAT off memory access, e.g. on kdump
  s390/oprofile: fix address range for asynchronous stack
  s390/perf_event: fix address range for asynchronous stack
  s390/stacktrace: add save_stack_trace_regs()
  s390/stacktrace: save full stack traces
  s390/stacktrace: add missing end marker
  s390/stacktrace: fix address ranges for asynchronous and panic stack
  s390/stacktrace: fix save_stack_trace_tsk() for current task

Merge tag 'pinctrl-v4.5-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull Pin control fixes from Linus Walleij:
"Pin control fixes for the v4.5 series, all are individual driver
  fixes:

   - Fix the PXA2xx driver to export its init function so we do not
     break modular compiles.
   - Hide unused functions in the Nomadik driver.
   - Fix up direction control in the Mediatek driver.
   - Toggle the sunxi GPIO lines to input when you read them on the H3
     GPIO controller, lest you only get garbage.
   - Fix up the number of settings in the MVEBU driver.
   - Fix a serious SMP race condition in the Samsung driver"

* tag 'pinctrl-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: samsung: fix SMP race condition
  pinctrl: mvebu: fix num_settings in mpp group assignment
  pinctrl: sunxi: H3 requires irq_read_needs_mux
  pinctrl: mediatek: fix direction control issue
  pinctrl: nomadik: hide unused functions
  pinctrl: pxa: export pxa2xx_pinctrl_init()

Merge tag 'sound-4.5-rc5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This update contains again a few more fixes for ALSA core stuff
  although it's no longer high flux: two race fixes in sequencer and one
  PCM race fix for non-atomic PCM ops.

  In addition, HD-audio gained a similar fix for race at reloading the
  driver"

* tag 'sound-4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream
  ALSA: seq: Fix double port list deletion
  ALSA: hda - Cancel probe work instead of flush at remove
  ALSA: seq: Fix leak of pool buffer at concurrent writes

arm64: mm: allow the kernel to handle alignment faults on user accesses

Although we don't expect to take alignment faults on access to normal
memory, misbehaving (i.e. buggy) user code can pass MMIO pointers into
system calls, leading to things like get_user accessing device memory.

Rather than OOPS the kernel, allow any exception fixups to run and
return something like -EFAULT back to userspace. This makes the
behaviour more consistent with userspace, even though applications with
access to device mappings can easily cause other issues if they try
hard enough.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Eun Taik Lee <eun.taik.lee@samsung.com>
[will: dropped __kprobes annotation and rewrote commit mesage]
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: kbuild: make "make install" not depend on vmlinux

For the same reason as commit 19514fc665ff ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

ext4: fix crashes in dioread_nolock mode

Competing overwrite DIO in dioread_nolock mode will just overwrite
pointer to io_end in the inode. This may result in data corruption or
extent conversion happening from IO completion interrupt because we
don't properly set buffer_defer_completion() when unlocked DIO races
with locked DIO to unwritten extent.

Since unlocked DIO doesn't need io_end for anything, just avoid
allocating it and corrupting pointer from inode for locked DIO.
A cleaner fix would be to avoid these games with io_end pointer from the
inode but that requires more intrusive changes so we leave that for
later.

Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix bh->b_state corruption

ext4 can update bh->b_state non-atomically in _ext4_get_block() and
ext4_da_get_block_prep(). Usually this is fine since bh is just a
temporary storage for mapping information on stack but in some cases it
can be fully living bh attached to a page. In such case non-atomic
update of bh->b_state can race with an atomic update which then gets
lost. Usually when we are mapping bh and thus updating bh->b_state
non-atomically, nobody else touches the bh and so things work out fine
but there is one case to especially worry about: ext4_finish_bio() uses
BH_Uptodate_Lock on the first bh in the page to synchronize handling of
PageWriteback state. So when blocksize < pagesize, we can be atomically
modifying bh->b_state of a buffer that actually isn't under IO and thus
can race e.g. with delalloc trying to map that buffer. The result is
that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the
corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock.

Fix the problem by always updating bh->b_state bits atomically.

CC: stable@vger.kernel.org
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

drm/nouveau: use post-decrement in error handling

We need to use post-decrement to get the dma_map_page undone also for
i==0, and to avoid some very unpleasant behaviour if dma_map_page
failed already at i==0.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/atomic: Allow for holes in connector state, v2.

Because we record connector_mask using 1 << drm_connector_index now
the connector_mask should stay the same even when other connectors
are removed. This was not the case with MST, in that case when removing
a connector all other connectors may change their index.

This is fixed by waiting until the first get_connector_state to allocate
connector_state, and force reallocation when state is too small.

As a side effect connector arrays no longer have to be preallocated,
and can be allocated on first use which means a less allocations in
the page flip only path.

Changes since v1:
- Whitespace. (Ville)
- Call ida_remove when destroying the connector. (Ville)
- u32 alloc -> int. (Ville)

Fixes: 14de6c44d149 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

hwmon: (ads1015) Handle negative conversion values correctly

Make the divisor signed as DIV_ROUND_CLOSEST is undefined for negative
dividends when the divisor is unsigned.

Signed-off-by: Peter Rosin <peda@axentia.se>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

clk: gpio: Really allow an optional clock= DT property

We mis-merged the original patch from Russell here and so the
patch went almost all the way, except that we still failed to
probe when there wasn't a clocks property in the DT node. Allow
that case by making a negative value from
of_clk_get_parent_count() into "no parents", like the original
patch did.

Fixes: 7ed88aa2efa5 ("clk: fix clk-gpio.c with optional clock= DT property")
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'drm-vc4-fixes-2016-02-17' of github.com:anholt/linux into drm-fixes

This pull request fixes GPU reset (which was disabled shortly after
V3D integration due to build breakage) and waits for idle in the
presence of signals (which X likes to do a lot).

* tag 'drm-vc4-fixes-2016-02-17' of github.com:anholt/linux:
  drm/vc4: Use runtime PM to power cycle the device when the GPU hangs.
  drm/vc4: Enable runtime PM.
  drm/vc4: Fix spurious GPU resets due to BO reuse.
  drm/vc4: Drop error message on seqno wait timeouts.
  drm/vc4: Fix -ERESTARTSYS error return from BO waits.
  drm/vc4: Return an ERR_PTR from BO creation instead of NULL.
  drm/vc4: Fix the clear color for the first tile rendered.
  drm/vc4: Validate that WAIT_BO padding is cleared.

Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Just two small fixes in the ttm_tt_populate error handling; one for radeon,
one for amdgpu.

* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: use post-decrement in error handling
drm/amdgpu: use post-decrement in error handling

Merge tag 'drm-intel-fixes-2016-02-18' of git://anongit.freedesktop.org/drm-intel into drm-fixes

single g4x hpd fix.

* tag 'drm-intel-fixes-2016-02-18' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix hpd live status bits for g4x

Merge tag 'nfs-rdma-4.5-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma

NFS: NFSoRDMA Client Bugfix

This patch fixes a bug where NFS v4.1 callbacks were returning
RPC_GARBAGE_ARGS to the server.

Signed-off-by: Anna Schumaker <Anna@OcarinaProject.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching

Pull livepatching fixes from Jiri Kosina:

- regression (from 4.4) fix for ordering issue, introduced by an
   earlier ftrace change, that broke live patching of modules.

   The fix replaces the ftrace module notifier by direct call in order
   to make the ordering guaranteed and well-defined.  The patch, from
   Jessica Yu, has been acked both by Steven and Rusty

- error message fix from Miroslav Benes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  ftrace/module: remove ftrace module notifier
  livepatch: change the error message in asm/livepatch.h header files

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two simple fixes.

  One prevents a soft lockup on some target removal scenarios and the
  other prevents us trying to probe the marvell console device, which
  causes it to time out and need the bus resetting"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fix soft lockup in scsi_remove_target() on module removal
  SCSI: Add Marvell configuration device to VPD blacklist

mm: slab: free kmem_cache_node after destroy sysfs file

When slub_debug alloc_calls_show is enabled we will try to track
location and user of slab object on each online node, kmem_cache_node
structure and cpu_cache/cpu_slub shouldn't be freed till there is the
last reference to sysfs file.

This fixes the following panic:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
   IP:  list_locations+0x169/0x4e0
   PGD 257304067 PUD 438456067 PMD 0
   Oops: 0000 [#1] SMP
   CPU: 3 PID: 973074 Comm: cat ve: 0 Not tainted 3.10.0-229.7.2.ovz.9.30-00007-japdoll-dirty #2 9.30
   Hardware name: DEPO Computers To Be Filled By O.E.M./H67DE3, BIOS L1.60c 07/14/2011
   task: ffff88042a5dc5b0 ti: ffff88037f8d8000 task.ti: ffff88037f8d8000
   RIP: list_locations+0x169/0x4e0
   Call Trace:
     alloc_calls_show+0x1d/0x30
     slab_attr_show+0x1b/0x30
     sysfs_read_file+0x9a/0x1a0
     vfs_read+0x9c/0x170
     SyS_read+0x58/0xb0
     system_call_fastpath+0x16/0x1b
   Code: 5e 07 12 00 b9 00 04 00 00 3d 00 04 00 00 0f 4f c1 3d 00 04 00 00 89 45 b0 0f 84 c3 00 00 00 48 63 45 b0 49 8b 9c c4 f8 00 00 00 <48> 8b 43 20 48 85 c0 74 b6 48 89 df e8 46 37 44 00 48 8b 53 10
   CR2: 0000000000000020

Separated __kmem_cache_release from __kmem_cache_shutdown which now
called on slab_kmem_cache_release (after the last reference to sysfs
file object has dropped).

Reintroduced locking in free_partial as sysfs file might access cache's
partial list after shutdowning - partial revert of the commit
69cb8e6b7c29 ("slub: free slabs without holding locks").  Zap
__remove_partial and use remove_partial (w/o underscores) as
free_partial now takes list_lock which s partial revert for commit
1e4dd9461fab ("slub: do not assert not having lock in removing freed
partial")

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/shm: handle removed segments gracefully in shm_mmap()

remap_file_pages(2) emulation can reach file which represents removed
IPC ID as long as a memory segment is mapped. It breaks expectations of
IPC subsystem.

Test case (rewritten to be more human readable, originally autogenerated
by syzkaller[1]):

#define _GNU_SOURCE
#include <stdlib.h>
#include <sys/ipc.h>
#include <sys/mman.h>
#include <sys/shm.h>

#define PAGE_SIZE 4096

int main()
{
int id;
void *p;

id = shmget(IPC_PRIVATE, 3 * PAGE_SIZE, 0);
p = shmat(id, NULL, 0);
shmctl(id, IPC_RMID, NULL);
remap_file_pages(p, 3 * PAGE_SIZE, 0, 7, 0);

return 0;
}

The patch changes shm_mmap() and code around shm_lock() to propagate
locking error back to caller of shm_mmap().

[1] http://github.com/google/syzkaller

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update Kselftest Framework mailing list

Kselftest Framework now has a dedicated mailing list linux-kselftest.
Update the entry in MAINTAINERS file.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

devm_memremap_release(): fix memremap'd addr handling

The pmem driver calls devm_memremap() to map a persistent memory range.
When the pmem driver is unloaded, this memremap'd range is not released
so the kernel will leak a vma.

Fix devm_memremap_release() to handle a given memremap'd address
properly.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c: fix incorrect proc nr_hugepages value

Currently incorrect default hugepage pool size is reported by proc
nr_hugepages when number of pages for the default huge page size is
specified twice.

When multiple huge page sizes are supported, /proc/sys/vm/nr_hugepages
indicates the current number of pre-allocated huge pages of the default
size.  Basically /proc/sys/vm/nr_hugepages displays default_hstate->
max_huge_pages and after boot time pre-allocation, max_huge_pages should
equal the number of pre-allocated pages (nr_hugepages).

Test case:

Note that this is specific to x86 architecture.

Boot the kernel with command line option 'default_hugepagesz=1G
hugepages=X hugepagesz=2M hugepages=Y hugepagesz=1G hugepages=Z'.  After
boot, 'cat /proc/sys/vm/nr_hugepages' and 'sysctl -a | grep hugepages'
returns the value X.  However, dmesg output shows that Z huge pages were
pre-allocated.

So, the root cause of the problem here is that the global variable
default_hstate_max_huge_pages is set if a default huge page size is
specified (directly or indirectly) on the command line.  After the command
line processing in hugetlb_init, if default_hstate_max_huge_pages is set,
the value is assigned to default_hstae.max_huge_pages.  However,
default_hstate.max_huge_pages may have already been set based on the
number of pre-allocated huge pages of default_hstate size.

The solution to this problem is if hstate->max_huge_pages is already set
then it should not set as a result of global max_huge_pages value.
Basically if the value of the variable hugepages is set multiple times on
a command line for a specific supported hugepagesize then proc layer
should consider the last specified value.

Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, x86: fix pte_page() crash in gup_pte_range()

Commit 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") has
moved up the pte_page(pte) in x86's fast gup_pte_range(), for no
discernible reason: put it back where it belongs, after the pte_flags
check and the pfn_valid cross-check.

That may be the cause of the NULL pointer dereference in
gup_pte_range(), seen when vfio called vaddr_get_pfn() when starting a
qemu-kvm based VM.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Michael Long <Harn-Solo@gmx.de>
Tested-by: Michael Long <Harn-Solo@gmx.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fsnotify: turn fsnotify reaper thread into a workqueue job

We don't require a dedicated thread for fsnotify cleanup. Switch it
over to a workqueue job instead that runs on the system_unbound_wq.

In the interest of not thrashing the queued job too often when there are
a lot of marks being removed, we delay the reaper job slightly when
queueing it, to allow several to gather on the list.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "fsnotify: destroy marks with call_srcu instead of dedicated thread"

This reverts commit c510eff6beba ("fsnotify: destroy marks with
call_srcu instead of dedicated thread").

Eryu reported that he was seeing some OOM kills kick in when running a
testcase that adds and removes inotify marks on a file in a tight loop.

The above commit changed the code to use call_srcu to clean up the
marks.  While that does (in principle) work, the srcu callback job is
limited to cleaning up entries in small batches and only once per jiffy.
It's easily possible to overwhelm that machinery with too many call_srcu
callbacks, and Eryu's reproduer did just that.

There's also another potential problem with using call_srcu here.  While
you can obviously sleep while holding the srcu_read_lock, the callbacks
run under local_bh_disable, so you can't sleep there.

It's possible when putting the last reference to the fsnotify_mark that
we'll end up putting a chain of references including the fsnotify_group,
uid, and associated keys.  While I don't see any obvious ways that that
could occurs, it's probably still best to avoid using call_srcu here
after all.

This patch reverts the above patch.  A later patch will take a different
approach to eliminated the dedicated thread here.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reported-by: Eryu Guan <guaneryu@gmail.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Cc: Jan Kara <jack@suse.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix regression in remap_file_pages() emulation

Grazvydas Ignotas has reported a regression in remap_file_pages()
emulation.

Testcase:
#define _GNU_SOURCE
#include <assert.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/mman.h>

#define SIZE (4096 * 3)

int main(int argc, char **argv)
{
unsigned long *p;
long i;

p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
if (p == MAP_FAILED) {
perror("mmap");
return -1;
}

for (i = 0; i < SIZE / 4096; i++)
p[i * 4096 / sizeof(*p)] = i;

if (remap_file_pages(p, 4096, 0, 1, 0)) {
perror("remap_file_pages");
return -1;
}

if (remap_file_pages(p, 4096 * 2, 0, 1, 0)) {
perror("remap_file_pages");
return -1;
}

assert(p[0] == 1);

munmap(p, SIZE);

return 0;
}

The second remap_file_pages() fails with -EINVAL.

The reason is that remap_file_pages() emulation assumes that the target
vma covers whole area we want to over map. That assumption is broken by
first remap_file_pages() call: it split the area into two vma.

The solution is to check next adjacent vmas, if they map the same file
with the same flags.

Fixes: c8d78c1823f4 ("mm: replace remap_file_pages() syscall with emulation")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Grazvydas Ignotas <notasas@gmail.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>