Felix Fietkau [Tue, 8 Oct 2013 11:09:48 +0000 (11:09 +0000)]
hostapd: add external registrar support
Setting wireless.@wifi-iface[N].ext_registrar=1 will enable UPNP
advertising and add an external registrar to the interface this vif
belongs to (br-lan if the vif is included in the LAN bridge). By
enabling this we append upnp_iface=xxx to the hostapd config file.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38338
Felix Fietkau [Tue, 8 Oct 2013 11:09:44 +0000 (11:09 +0000)]
hostapd: enable WPS2 support on hostapd-full.config
Enable CONFIG_WPS2 for hostapd. This is required to support
options like Virtual Push Button in WPS.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38337
Felix Fietkau [Tue, 8 Oct 2013 11:09:40 +0000 (11:09 +0000)]
hostapd: fix hostapd RSN preauthentication PMKSA caching
In 2009 OpenWrt's hostapd config added an "auth_cache" boolean
to be used to address a reported issue #12129 [0] on a forum [1].
The reported issue on the ticket is different that the one
described on the forum. The commit was r33359. This change broke
proper RSN preauthentication [2] [3] [4] expectations on hostapd's
configuration for WPA2 and this in turn disabled PMKSA caching and
Opportunistic Key Caching. This change:
* Leaves the "auth_cache" to be used only for WPA networks for those
looking to use this as a workaround to a reported issue but annotates
a warning over its usage.
* Separate "auth_cache" from WPA2 RSN preauthentication, leaving
WPA2 RSN preauthentication to enabled only with "rsn_preauth" with
the expected and recommended settings.
* Adds a new WPA2 RSN preauthentication "rsn_preauth_testing" to
be used when evaluating funcionality for WPA2 RSN preauthentication
with the expected and recommended settings with the only difference
so far with what should be enabled by default to disable Opportunistic
Key Caching.
Disabling the PMKSA cache should mean the STA could not roam off and back
onto the AP that had PMKSA caching disabled and would require a full
authentication cycle. This fixes this for WPA2 networks with
RSN preauthentication enabled.
This change should be applied to AA as well as trunk.
TL DR;
The issue described on the forum has to do with failure of a STA
being able to try to authenticate again with the AP if it failed
its first try. This may have been an issue with hostapd in 2009
but as per some tests I cannot reproduce this today on a WPA2
network.
The issue described on the ticket alludes to a security issue with the
design of using a Radius server to authenticate to an AP. The issue
vaguely alludes to the circumstances of zapping a user, deleting their
authentication credentials to log in to the network, and that if
RSN preauthentication is enabled with PMKSA caching that the user
that was zapped would still be able to authenticate.
Lets treat these as separate issues.
I cannot reproduce the first issue reported on the forums of not
being able to authenticate anymore on a WPA2 network.
The issue reported on the ticket modified WPA2 RSN preauthentication
by adding two fields to the hostapd configuration if auth_cache
was enabled:
* disable_pmksa_caching=1
* okc=0
The first one disables PMKSA authentication cache.
The second one disables Opportunistic Key Caching.
The issue reported on the ticket was fixed by implementing a workaround
in hostapd's configuration. Disabling PMKSA caching breaks proper use
of WPA2 RSN pre authentication. The usage of disable_pmksa_caching=1
prevents hostapd from adding PMKSA entries into its cache when a successful
802.1x authentication occurs. In practice RSN preauthentication would
trigger a STA to perform authentication with other APs on the same SSID,
it would then have its own supplicant PMKSA cache held. If a STA roams
between one AP to another no new authenitcation would need to be performed
as the new AP would already have authenticated the STA. The purpose of the
PMKSA cache on the AP side would be for the AP to use the same PMKID for
a STA when the STA roams off onto another BSSID and later comes back to it.
Disabling Opportunistic Key Caching could help the reported issue
as well but its not the correct place to address this. Opportunistic
Key Caching enables an AP with different interfaces to share the
PMKSA cache. Its a technical enhancement and disabling it would
be useful to let a testing suite properly test for RSN preauthentication
given that otherwise Opportunistic Key Caching would enable an
interface being tested to derive its own derive the PMKSA entry.
In production though okc=1 should be enabled to help with RSN
preauthentication.
The real fix for this particular issue outside of the scope of hostapd's
configuration and it should not be dealt with as a workaround to
its configuration and breaking expected RSN preauthentication and
technical optimizations. Revert this change and enable users to pick
and choose to enable or disable disable_pmksa_caching and okc expecting them
to instead have read clearly more what these do.
As for the core issure ported, the correct place to fix this is to
enable a sort of messaging between the RADIUS server and its peers
so that if caching for authentication is enabled that cache can be
cleared upon user credential updates. Updating a user password
(not just zapping a user) is another possible issue that would need
to be resolved here. Another part of the solution might be to reduce
the cache timing to account for any systematic limitations (RADIUS
server not able to ask peers to clear cache might be
one).
[0] https://dev.openwrt.org/changeset/33359
[1] https://forum.openwrt.org/viewtopic.php?id=19596
[2] http://wireless.kernel.org/en/users/Documentation/hostapd#IEEE_802.11i.2FRSN.2FWPA2_pre-authentication
[3] http://wireless.kernel.org/en/users/Documentation/wpa_supplicant#RSN_preauthentication
[4] http://wiki.openwrt.org/doc/recipes/rsn_preauthentication
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
SVN-Revision: 38336
Felix Fietkau [Tue, 8 Oct 2013 11:09:36 +0000 (11:09 +0000)]
hostapd: Add WPS unconfigured & WPS pin method support
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38335
Felix Fietkau [Tue, 8 Oct 2013 11:09:27 +0000 (11:09 +0000)]
hostapd: Add eap_reauth_period config option
This adds the eap_reauth_period to be used for modifying
the RADIUS server reauthentication authentication period,
a parameter that gets passed directly to the hostapd
configuration file.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38334
Hauke Mehrtens [Mon, 7 Oct 2013 22:16:17 +0000 (22:16 +0000)]
mac80211: wl12xx: build them again
WL_TI is bool but was set to =m, which deactivated it. Now it is set to
=y and should be activated in the config so the wl12xx driver gets
build.
This closes #14212.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38333
Hauke Mehrtens [Mon, 7 Oct 2013 21:49:28 +0000 (21:49 +0000)]
mac80211: brcmfmac: BRCMFMAC_USB was not set in config
Somehow BRCMFMAC_USB was not set in the build and brcmfmac.ko did not had usb support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38332
Luka Perkov [Mon, 7 Oct 2013 21:28:14 +0000 (21:28 +0000)]
openvpn: switch to new procd init script style
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38331
Luka Perkov [Mon, 7 Oct 2013 21:28:12 +0000 (21:28 +0000)]
polarssl: update to 1.2.9
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38330
John Crispin [Mon, 7 Oct 2013 20:13:32 +0000 (20:13 +0000)]
lantiq: fix ltq_ptm compile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38329
John Crispin [Mon, 7 Oct 2013 15:03:00 +0000 (15:03 +0000)]
lantiq: experia v8 fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38328
John Crispin [Mon, 7 Oct 2013 15:02:56 +0000 (15:02 +0000)]
lantiq: fix fritz3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38327
John Crispin [Mon, 7 Oct 2013 15:02:52 +0000 (15:02 +0000)]
lantiq: fix fritz image generation
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38326
John Crispin [Mon, 7 Oct 2013 15:02:48 +0000 (15:02 +0000)]
lantiq: fix eva partition split for squashfs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38325
John Crispin [Mon, 7 Oct 2013 15:02:44 +0000 (15:02 +0000)]
ralink: fix asiarf image generation
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38324
John Crispin [Mon, 7 Oct 2013 15:02:39 +0000 (15:02 +0000)]
ralink: split mt7530 driver out of the gsw driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38323
John Crispin [Mon, 7 Oct 2013 15:02:35 +0000 (15:02 +0000)]
ralink: build recovery images for dcs930 ip cam
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38322
John Crispin [Mon, 7 Oct 2013 15:02:31 +0000 (15:02 +0000)]
ralink: DIR610A1 Fix remaining issues
This patch fixes:
- Ethernet and Wireless LEDs
- Wireless MAC Address
- Remove whitespaces from dts file
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38321
John Crispin [Mon, 7 Oct 2013 15:02:27 +0000 (15:02 +0000)]
ralink: MT7620 eval board pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38320
John Crispin [Mon, 7 Oct 2013 15:02:23 +0000 (15:02 +0000)]
ralink: make cevt systick selectable via kconfig
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38319
John Crispin [Mon, 7 Oct 2013 15:02:18 +0000 (15:02 +0000)]
ralink: fix mt7620a pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38318
John Crispin [Mon, 7 Oct 2013 15:01:05 +0000 (15:01 +0000)]
tools: add tool to generate dcs93xl images
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38317
Steven Barth [Mon, 7 Oct 2013 08:43:33 +0000 (08:43 +0000)]
odhcp6c: improve server selection, introduce "forceprefix" option
SVN-Revision: 38314
Luka Perkov [Mon, 7 Oct 2013 08:26:41 +0000 (08:26 +0000)]
iproute2: update to 3.11
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38313
Hauke Mehrtens [Mon, 7 Oct 2013 00:01:01 +0000 (00:01 +0000)]
brcm47xx: Cocci spatch "noderef"
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
SVN-Revision: 38312
Hauke Mehrtens [Mon, 7 Oct 2013 00:00:10 +0000 (00:00 +0000)]
brcm47xx: move clock detection patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38311
Hauke Mehrtens [Sun, 6 Oct 2013 23:57:11 +0000 (23:57 +0000)]
brcm47xx: move and rename nvram gpio patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38310
Hauke Mehrtens [Sun, 6 Oct 2013 23:55:35 +0000 (23:55 +0000)]
brcm47xx: update early printk patches
Early printk was disabled because it caused hangs on some devices, the
old patches were using the CFE console now we use the normal serial
console, it is at a constant address.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38309
Hauke Mehrtens [Sun, 6 Oct 2013 23:51:24 +0000 (23:51 +0000)]
brcm47xx: update board detection patches
Add patches like they are currently in the mainline mips tree and add
some more pending patches for board detection.
* Now the board name is shown under machine in /proc/cpuinfo.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38308
Hauke Mehrtens [Sun, 6 Oct 2013 22:35:28 +0000 (22:35 +0000)]
kernel: b53: add switch name into printk when it fails.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38307
Hauke Mehrtens [Sun, 6 Oct 2013 18:31:32 +0000 (18:31 +0000)]
brcm47xx: b44: fix some problems with the phy
* do not try initialize a unused phy
* some improvements to the phylib patch
* do not turn the phy off when mac is off
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38306
Felix Fietkau [Sat, 5 Oct 2013 12:12:21 +0000 (12:12 +0000)]
ath9k: fix tx queueing issues after background scans
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38304
Luka Perkov [Fri, 4 Oct 2013 10:49:47 +0000 (10:49 +0000)]
build: extend menu with few ubifs options
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38303
Steven Barth [Fri, 4 Oct 2013 05:56:20 +0000 (05:56 +0000)]
opkg: add support for SHA256 verification
based on a patch by Evan Hunt <each@isc.org>
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 38302
Luka Perkov [Fri, 4 Oct 2013 03:45:52 +0000 (03:45 +0000)]
kirkwood: add support for UBI (3.10.x)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38301
Felix Fietkau [Thu, 3 Oct 2013 14:51:34 +0000 (14:51 +0000)]
netifd: update to latest version, adds macvlan support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38299
Luka Perkov [Thu, 3 Oct 2013 13:06:42 +0000 (13:06 +0000)]
imx6: update upstream pcie patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38298
Luka Perkov [Thu, 3 Oct 2013 02:50:03 +0000 (02:50 +0000)]
kirkwood: enable dts compilation
In 3.10 we might build those, so for now just add this functionality.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38297
Luka Perkov [Thu, 3 Oct 2013 02:50:02 +0000 (02:50 +0000)]
kirkwood: fix initramfs images
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38296
Luka Perkov [Thu, 3 Oct 2013 02:50:00 +0000 (02:50 +0000)]
kirkwood: update patches and configuration (3.10)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38295
Hauke Mehrtens [Wed, 2 Oct 2013 23:22:18 +0000 (23:22 +0000)]
brcm47xx: add support for ipv6 in default network config
Modify /etc/init.d/netconfig to use UCI defaults for building the
default network config, which includes appropriate defaults for IPV6.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38294
Hauke Mehrtens [Wed, 2 Oct 2013 23:14:08 +0000 (23:14 +0000)]
broadcom-diag: fix 'autoload' number of diag.ko
Change the autoload number from '5' to '05' so the module loads earlier (as intended).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38293
Hauke Mehrtens [Wed, 2 Oct 2013 23:12:46 +0000 (23:12 +0000)]
kernel: bgmac: fix BCM4707 patch
The bool logic was the wrong way around.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38292
Hauke Mehrtens [Wed, 2 Oct 2013 22:26:43 +0000 (22:26 +0000)]
kernel: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38291
Hauke Mehrtens [Wed, 2 Oct 2013 22:26:15 +0000 (22:26 +0000)]
kernel: bcma: update to wireless-testing master-2013-10-01
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38290
Hauke Mehrtens [Wed, 2 Oct 2013 22:25:26 +0000 (22:25 +0000)]
kernel: bgmac: move other bgmac patches to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38289
Hauke Mehrtens [Wed, 2 Oct 2013 22:24:01 +0000 (22:24 +0000)]
kernel: bgmac: move bgmac patches already applied in mainline kernel to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
These are only the patches already applied in current net-next/master
branch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38288
Steven Barth [Wed, 2 Oct 2013 16:38:28 +0000 (16:38 +0000)]
package/index: fix index creating when building without signing
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 38287
Steven Barth [Wed, 2 Oct 2013 14:16:05 +0000 (14:16 +0000)]
odhcp6c: validate hop-limit on RAs
SVN-Revision: 38285
Steven Barth [Wed, 2 Oct 2013 12:12:10 +0000 (12:12 +0000)]
Add package signing infrastructure
Add package signing key and certificate configuration options to the
"Image configuration" submenu. If enabled, the Packages.gz list will
be signed as file Packages.sig. The passphrase for the signing key can
be sourced from a file or entered by the user. The signing certificate
is automatically added to the firmware image if opkg-smime is selected.
Signed-off-by: Evan Hunt <each@isc.org>
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 38284
Steven Barth [Wed, 2 Oct 2013 06:14:39 +0000 (06:14 +0000)]
6relayd: remove compat ULA setting by default (too many bad sideeffects)
SVN-Revision: 38283
Luka Perkov [Wed, 2 Oct 2013 00:33:49 +0000 (00:33 +0000)]
imx6: add default profile
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38282
Luka Perkov [Wed, 2 Oct 2013 00:33:48 +0000 (00:33 +0000)]
kirkwood: drop PROFILE from image names
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38281
Luka Perkov [Wed, 2 Oct 2013 00:33:47 +0000 (00:33 +0000)]
kirkwood: add linux 3.10 support
Backport appropriate patches to allow using device tree only board
defintions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38280
Luka Perkov [Wed, 2 Oct 2013 00:33:45 +0000 (00:33 +0000)]
kirkwood: prepare for 3.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38279
Luka Perkov [Wed, 2 Oct 2013 00:33:43 +0000 (00:33 +0000)]
kirkwood: explicitly set CPU_TYPE to xscale
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38278
Hauke Mehrtens [Tue, 1 Oct 2013 22:41:46 +0000 (22:41 +0000)]
c80211: add iwldvm to iwlwifi, this is needed to support the old wifi card.
This closes #14258
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38277
Hauke Mehrtens [Tue, 1 Oct 2013 22:40:32 +0000 (22:40 +0000)]
kernel: add industrialio-triggered-buffer.ko only when the config option is selected.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38276
Hauke Mehrtens [Tue, 1 Oct 2013 22:39:28 +0000 (22:39 +0000)]
ep93xx: fix kmod-input-keyboard-ep93xx dependencies
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38275
Hauke Mehrtens [Tue, 1 Oct 2013 22:38:40 +0000 (22:38 +0000)]
ep93xx: fix sound dependencies for ep93xx
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38274
Hauke Mehrtens [Tue, 1 Oct 2013 22:37:17 +0000 (22:37 +0000)]
at91: fix missing drivers/iio/adc/at91-adc.ko in kmod-at91-adc
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38273
Steven Barth [Tue, 1 Oct 2013 17:30:05 +0000 (17:30 +0000)]
netifd: don't remove & readd addresses that only have a changed lifetime
SVN-Revision: 38269
Jo-Philipp Wich [Tue, 1 Oct 2013 14:41:07 +0000 (14:41 +0000)]
procd: fix incorrect use of sizeof() in vsnprintf()
SVN-Revision: 38268
John Crispin [Mon, 30 Sep 2013 20:48:51 +0000 (20:48 +0000)]
procd: update to latest git head
this fixes the syslog problem when using eglibc on x86.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38267
John Crispin [Mon, 30 Sep 2013 20:48:46 +0000 (20:48 +0000)]
lantiq: add support for VGV7519 KPN Experia box v8
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38266
John Crispin [Mon, 30 Sep 2013 20:48:39 +0000 (20:48 +0000)]
ralink: dts fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38265
John Crispin [Mon, 30 Sep 2013 20:48:34 +0000 (20:48 +0000)]
ralink: fix DIR-320-B1 board detection
https://dev.openwrt.org/ticket/14226
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38264
John Crispin [Mon, 30 Sep 2013 20:48:27 +0000 (20:48 +0000)]
ralink: Change size of image for DIR-320 B1 to 8MB
http://patchwork.openwrt.org/patch/4102/
Signed-off-by: Vladimir Stolyarov <xakep6666@yandex.ru>
SVN-Revision: 38263
John Crispin [Mon, 30 Sep 2013 20:48:12 +0000 (20:48 +0000)]
kernel: lib-textsearch needs to be auto probed for amanda nat to work
https://dev.openwrt.org/ticket/14232
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38262
Steven Barth [Mon, 30 Sep 2013 08:41:00 +0000 (08:41 +0000)]
uClibc: fix scoped-IPv6-addresses in getnameinfo
SVN-Revision: 38261
Felix Fietkau [Sun, 29 Sep 2013 20:10:42 +0000 (20:10 +0000)]
scripts/gen-dependencies.sh: use the cross readelf (#12940)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38259
Felix Fietkau [Sun, 29 Sep 2013 19:42:00 +0000 (19:42 +0000)]
mac80211: add AP inactivity handling / probing fixes to improve stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38257
Felix Fietkau [Sun, 29 Sep 2013 12:53:21 +0000 (12:53 +0000)]
mac80211: really fix the long standing wds ap tx power regression (#14153)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38255
Jo-Philipp Wich [Sun, 29 Sep 2013 11:53:25 +0000 (11:53 +0000)]
rpcd: fix missing option removal when merging subsequent uci set calls
SVN-Revision: 38254
Jo-Philipp Wich [Sun, 29 Sep 2013 11:53:20 +0000 (11:53 +0000)]
ubus: restrict unix domain socket permission to 0600 to disallow non-root connections
SVN-Revision: 38253
Jo-Philipp Wich [Sun, 29 Sep 2013 11:53:17 +0000 (11:53 +0000)]
ubox: support alternative spellings for modinfo and rmmod
After this change, "rmmod" and "modinfo" works even if the user gives
the file name spelling instead of the kernel internal one, so that e.g.
"rmmod nls_iso8859-1.ko" and "rmmod nls_iso8859_1" will both succeed.
SVN-Revision: 38252
Jo-Philipp Wich [Sun, 29 Sep 2013 11:53:10 +0000 (11:53 +0000)]
uci: change uci_ptr checking order in uci_delete()
SVN-Revision: 38251
Felix Fietkau [Sun, 29 Sep 2013 11:26:09 +0000 (11:26 +0000)]
uhttpd: add a config option for using ustream-polarssl, and use it by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38250
Felix Fietkau [Sun, 29 Sep 2013 11:07:58 +0000 (11:07 +0000)]
ath9k: fix an AP mode powersave issue with aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38249
Jo-Philipp Wich [Sat, 28 Sep 2013 13:12:42 +0000 (13:12 +0000)]
ubox: fix kmod loading for modules with varying dashes & underscores in names (#14182, #14189)
Instead of canonicalizing module names in the internal avl tree simpyl use a
custom strcmp() variant for the avl tree key comparisation. The custom comperator
simply treats dashes and underscores the same, so "nls_iso8859-15" is equal to
"nls-iso8859-15".
This allows us to simplify the code considerably and makes manual "modprobe"
invocations more forgiving when looking up the given module name.
SVN-Revision: 38248
Felix Fietkau [Sat, 28 Sep 2013 05:22:05 +0000 (05:22 +0000)]
kernel: disable kmod-iio for linux 3.6 as well (to avoid build issues due to missing config symbol changes)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38247
Felix Fietkau [Fri, 27 Sep 2013 21:12:19 +0000 (21:12 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38246
Felix Fietkau [Fri, 27 Sep 2013 21:12:15 +0000 (21:12 +0000)]
kernel: exclude regmap-spi.ko if SPI support cannot be selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38245
Felix Fietkau [Fri, 27 Sep 2013 21:12:12 +0000 (21:12 +0000)]
octeon: remove CONFIG_FW_LOADER override to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38244
Felix Fietkau [Fri, 27 Sep 2013 21:12:08 +0000 (21:12 +0000)]
lantiq: add a default for CONFIG_MTD_NAND_XWAY to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38243
Felix Fietkau [Fri, 27 Sep 2013 21:12:04 +0000 (21:12 +0000)]
kernel: make sound-soc-core depend on kmod-ac97
it has a conditional #ifdef based dependency on it, which trips up on
some targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38242
Felix Fietkau [Fri, 27 Sep 2013 21:12:01 +0000 (21:12 +0000)]
kernel: add another missing symbol for iio
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38241
Felix Fietkau [Fri, 27 Sep 2013 20:54:00 +0000 (20:54 +0000)]
kernel: add missing symbols for iio on older kernel versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38240
Felix Fietkau [Fri, 27 Sep 2013 20:47:09 +0000 (20:47 +0000)]
kernel: remove old kernel compat code for pcmcia
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38239
Felix Fietkau [Fri, 27 Sep 2013 20:44:11 +0000 (20:44 +0000)]
kernel: mark kmod-thermal menuconfig symbol as hidden to avoid building it on targets with no thermal drivers
Should fix build errors with Linux 3.3/3.6 targets, which use different
kconfig symbols
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38238
Felix Fietkau [Fri, 27 Sep 2013 13:03:45 +0000 (13:03 +0000)]
build: fix typo in arm cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38237
Luka Perkov [Fri, 27 Sep 2013 12:49:34 +0000 (12:49 +0000)]
patch: other tools might depend on this one
Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi>
SVN-Revision: 38236
Luka Perkov [Fri, 27 Sep 2013 12:32:18 +0000 (12:32 +0000)]
quilt: add findutils as dependency
Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi>
SVN-Revision: 38235
Gabor Juhos [Fri, 27 Sep 2013 11:15:34 +0000 (11:15 +0000)]
ar71xx: ar934x-nfc: disable subpage write when hardware ECC is used
It is not supported by the controller.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38234
Luka Perkov [Fri, 27 Sep 2013 10:49:37 +0000 (10:49 +0000)]
imx6: enable cpufreq-imx6q by default
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38233
Luka Perkov [Fri, 27 Sep 2013 10:49:36 +0000 (10:49 +0000)]
mvebu: enable thermal module by default
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38232
Luka Perkov [Fri, 27 Sep 2013 10:49:35 +0000 (10:49 +0000)]
imx6: enable thermal module by default
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38231
Luka Perkov [Fri, 27 Sep 2013 10:49:33 +0000 (10:49 +0000)]
kernel: add thermal modules
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38230
Luka Perkov [Fri, 27 Sep 2013 10:49:28 +0000 (10:49 +0000)]
imx6: backport thermal driver
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38229
Gabor Juhos [Fri, 27 Sep 2013 07:19:21 +0000 (07:19 +0000)]
kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38228
projects / openwrt / staging / luka.git / log