[ALSA] ymfpci: add per-voice volume controls

YMFPCI driver
Implements mixer controls for the volume of each playback substream of
the main PCM device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] Fix compiler warnings in PXA2XX-AC97

ARM PXA2XX driver
-  change pxa2xx_ac97_do_suspend and pxa2xx_ac97_do_resume to use
   the expected arguments

Signed-off-by: Dirk Opfer <dirk@do13.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] WM9713 modem detection

AC97 Codec
This patch fixes a problem whereby the WM9713 has modem functionality
incorrectly detected after an AC97 cold reset.

Changes:-

  o Cleared AC97_SCAP_MODEM in wm9713 scaps

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] PXA27x AC97 warm reset

ARM PXA2XX driver
This patch extends the period of an AC97 warm reset on the PXA27x from
50uS to 500uS. The shorter reset didn't always guarantee that the codec
would wake up.

Changes:-

  o Change pxa27x warm reset period to 500uS
  o Removed double semi-colon.

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] ad1816a - Add clockfreq module option

Documentation,AD1816A driver
Added clockfreq module option for the card with a different clock frequency
than 33kHz.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] use PCM interface for IEC958 controls

Digigram VX core,ENS1370/1+ driver,CA0106 driver,EMU10K1/EMU10K2 driver
RME HDSP driver,RME9652 driver
For consistency, use the PCM interface instead of MIXER for IEC958
default/mask/stream mixer controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] use SNDRV_CTL_NAME_IEC958 macro

CMI8330 driver,ENS1370/1+ driver,FM801 driver,VIA82xx driver,AC97 Codec
ALI5451 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
ICE1712 driver,ICE1724 driver
Where appropriate, use the SNDRV_CTL_NAME_IEC958 instead of a literal
string.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] ad1816a - Add clockfreq module option

Documentation
Added clockfreq module option for the card with a different clock frequency
than 33kHz.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] adds __init and in snd_memory_init()

ALSA Core
This patch adds the __init macro to snd_memory_init().

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] AC97 bus interface for ad-hoc drivers

AC97 Codec,PCI drivers
I've made the review changes and as requested I've pasted the RFC by
Nicolas below:-

'I would like to know what people think of the following patch.  It
allows for a codec on an AC97 bus to be shared with other drivers which
are completely unrelated to audio.  It registers a new bus type, and
whenever a codec instance is created then a device for it is also
registered with the driver model using that bus type.  This allows, for
example, to use the extra features of the UCB1400 like the touchscreen
interface and the additional GPIOs and ADCs available on that chip for
battery monitoring.  I have a working UCB1400 touchscreen driver here
that simply registers with the driver model happily working alongside
with audio features using this.'

Changes over RFC:-

  o Now matches codec name within codec group.
  o Added ac97_dev_release() to stop kernel complaining about no release
method for device.
  o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config
SND_AC97_CODEC' out with the PCI=n statement.
  o module is now called snd-ac97-bus

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] sound - fix .iface field of mixer control elements

Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver
SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver
RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver
RME HDSP driver,RME9652 driver
This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or
_HWDEP was used in controls that are not associated with a specific PCM
(sub)stream or hwdep device, and changes some controls that got
inconsitent .iface values due to copy+paste errors.  Furthermore, it
makes sure that all control that do use _PCM or _HWDEP use the correct
number in the .device field.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] via82xx - Add dxs entry for Acer Aspire 1524 WMLi

VIA82xx driver
Added the dxs entry for Acer Aspire 1524 WMLi.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda-codec - Fix LFE volume/switch

HDA Codec driver
Fixed LFE volume/switch control.

Signed-off-by: Nicolas Graziano <nicolas.graziano@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda-codec - Add default config for ASUS P5AD2

HDA Codec driver
Added the default config for ASUS P5AD2.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda-codec - Fix reordering of surround channels

HDA Codec driver
- Fixed the reordering of surround channels.
  Originally reported by Nicolas GRAZIANO <nicolas.graziano@wanadoo.fr>.

- Show the selected ssid when debug option is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] WM97xx AC97 codec controls

AC97 Codec
o Enhanced current WM97xx support to provide additional controls and
  use the kcontrol suffix naming convention.
o Added AC97_HAS_NO_MIC, AC97_HAS_NO_TONE and AC97_HAS_NO_STD_PCM.
o Cleaned up WM97xx related comments.
o Removed some wm9713 double mono controls and replaced with stereo
  controls.

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge refs/heads/upstream-fixes from /linux/kernel/git/jgarzik/netdev-2.6

Merge refs/heads/upstream from /linux/kernel/git/jgarzik/libata-dev

Merge HEAD from /linux/kernel/git/paulus/ppc64-2.6

[PATCH] s2io build fix

Damir Perisa <damir.perisa@solnet.ch> reports:

 drivers/net/s2io.h:765: error: invalid lvalue in assignment
 drivers/net/s2io.h:766: error: invalid lvalue in assignment

That's a gcc4 error.  I don't see why the casts are there anyway..

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] Remove nested feature sections

The {BEGIN,END}_FTR_SECTION asm macros used in ppc64 to nop out
sections of code at runtime cannot be nested.  However, we do nest
them in hash_low.S.  We get away with it there, because there is
nothing between the BEGIN markers for each section.  However, that's
confusing to someone reading the code.

This patch removes the nested ifset and ifclr feature sections,
replacing them with a single feature section in the full mask/value
form.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: lparconfig.c memory leak

This patch fixes a rare memory leak found by Coverity.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: of_device.c remove useless code

Coverity found more unused code.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Add CONFIG_HZ

While ppc64 has the CONFIG_HZ Kconfig option, it wasnt actually being
used.  Connect it up and set all platforms to 250Hz.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] oprofile PVR 970MP

Here's the 970MP's PVR (processor version register) entry for oprofile.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] PPC64: Don't try to claim memory from OF at 1GB mark

Some RS64-based machines (p620, F80, others) have problems with firmware
returning 0xdeadbeef instead of failure to allocations that end at the
1GB mark.

We have two options:
1. Detect the undocumented 0xdeadbeef return value and interpret it as
a failure.
2. Avoid allocating that high.

(2) is really the cleaner solution here. 768MB is plenty of room so use
that as the max alloc_top instead of 1GB.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Move all the very similar files to asm-powerpc

They differed in either simple comments or in the protecting ifdefs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Move the identical files from include/asm-ppc{,64}

Move the identical files from include/asm-ppc{,64}/ to
include/asm-powerpc/.  Remove hdreg.h completely as it is unused in
the tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Create include/asm-powerpc

The ppc and ppc64 trees are hopefully going to merge over time, so this
patch begins the process by creating a place for the merging of the
header files.

Create include/asm-powerpc (and move linkage.h into it from
asm-{ppc,ppc64} since we don't like empty directories).  Modify the
ppc and ppc64 Makefiles to cope.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Make MODULE_DEVICE_TABLE work for vio devices

Make MODULE_DEVICE_TABLE work for vio devices.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Create vio_bus_ops

Create vio_bus_ops so that we just pass a structure to vio_bus_init
instead of three separate function pointers.

Rearrange vio.h to avoid forward references. vio.h only needs
struct device_node from prom.h so remove the include and just
declare it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Create vio_register_device

Take some assignments out of vio_register_device_common and
rename it to vio_register_device.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Formatting changes to vio.c

Formatting changes to vio.c to bring it closer to the
kernel coding standard.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] fix iSeries build for gcc-3.4

gcc 3.4 (at least the build we are using) puts the gcc generated .ident
string into a .note section at the end of the files it compiles (gcc
3.3.3-hammer and gcc 4.0.2 Debian puts it in the .text section).  This
means that the lparmap.s file we produce in the iSeries build may end with
a .note section.  When we include it into head.S, the assembler can no
longer resolve some of the conditional branches since the target label
ends up too far away.  This patch just forces us back to the .text section
after including lparmap.s.

The breakage was caused by my patch "iSeries build with newer assemblers
and compilers" (sha1-id: 2ad56496627630ebc99f06af5f81ca23e17e014e).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Restore lparmap.s include for iSeries

A mistake rebasing the series of ppc64 head.S cleanup patches meant
the #include of lparmap.s, needed for iSeries was lost.  This patch
puts it back again.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: four level pagetables fix

With CONFIG_HUGETLB_PAGE=n:

In file included from kernel/sysctl.c:37:
include/linux/hugetlb.h:104:1: warning: "hugetlb_free_pgd_range" redefined
In file included from include/linux/mm.h:36,
                 from kernel/sysctl.c:23:
include/asm/pgtable.h:492:1: warning: this is the location of the previous definition

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge HEAD from /linux/kernel/git/davem/net-2.6.git

[PATCH] Lazy page table copies in fork()

Defer copying of ptes until fault time when it is possible to reconstruct
the pte from backing store. Idea from Andi Kleen and Nick Piggin.

Thanks to input from Rik van Riel and Linus and to Hugh for correcting
my blundering.

Ray Fucillo <fucillo@intersystems.com> reports:

  "I applied this latest patch to a 2.6.12 kernel and found that it does
   resolve the problem.  Prior to the patch on this machine, I was
   seeing about 23ms spent in fork for ever 100MB of shared memory
   segment.

   After applying the patch, fork is taking about 1ms regardless of the
   shared memory size."

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge HEAD from /linux/kernel/git/paulus/ppc64-2.6

[CCID3]: Call sk->sk_write_space(sk) when receiving a feedback packet

This makes the send rate calculations behave way more closely to what
is specified, with the jitter previously seen on x and x_recv
disappearing completely on non lossy setups.

This resembles the tcp_data_snd_check code, that possibly we'll end up
using in DCCP as well, perhaps moving this code to
inet_connection_sock.

For now I'm doing the simplest implementation tho.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Introduce DCCP_SOCKOPT_PACKET_SIZE

So that applications can set dccp_sock->dccps_pkt_size, that in turn
is used in the CCID3 half connection init routines to set
ccid3hc[tr]x_s and use it in its rate calculations.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER6]: Add new ip6tables HOPLIMIT target

This target allows users to modify the hoplimit header field of the
IPv6 header.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Add new iptables TTL target

This new iptables target allows manipulation of the TTL of an IPv4 packet.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Move ccid3_hc_rx_detect_loss to packet_history.c

Renaming it to dccp_rx_hist_detect_loss.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Move ccid3_hc_rx_add_hist to packet_history.c

Renaming it to dccp_rx_hist_add_packet.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Move the calc_X routines to dccp_tfrc_lib

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Introduce dccp_tfrc_lib module with net/dccp/ccids/lib/*.c

I'll now take a look at the other proposed TFRC DCCP CCIDs to find
more code that is now in ccid3.c and move to this module, the loss
event rate, calc_X, etc most probably will be moved there.

The main goal of these changes is to pave the way for the
implementation of more TFRC based DCCP CCIDs and to shrink ccid3.c,
reducing its complexity and helping in getting it rock solid.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Just move packet_history.[ch] to net/dccp/ccids/lib/

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Move the loss interval code to loss_interval.[ch]

And put this into net/dccp/ccids/lib/, where packet_history.[ch] will also be
moved and then we'll have a tfrc_lib.ko module that will be used by
dccp_ccid3.ko and other CCIDs that are variations of TFRC (RFC 3448).

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Move the CCID3 defines to ccid3.h

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Introduce usecs_div

To avoid open coding this all over the place.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Reorganise timeval handling

Introducing functions to add to or subtract from a timeval variable
and renaming now_delta to timeval_new_delta that calls do_gettimeofday
and then timeval_delta, that should be used when there are several
deltas made relative to the current time or setting variables to it,
so as to avoid calling do_gettimeofday excessively.

I'm leaving these "timeval_" prefixed funcions internal to DCCP for a
while till we're sure there are no subtle bugs in it.

It also is more correct as it checks if the number of usecs added to
or subtracted from a tv_usec field is more than 2 seconds.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Reflow to mostly fit under 80 columns

No code changes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Introduce dccp_wait_for_ccid and use it in dccp_write_xmit

This is not quite what I think we should have long term but improves
performance for now, so lets use it till we get CCID3 working well,
then we can think about using sk_write_queue, perhaps using some ideas
from Juwen Lai's old stack for 2.4.20.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Make the Debug Menu available when DCCP is statically linked too

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: use __read_mostly on kmem_cache_t , DEFINE_SNMP_STAT pointers

This patch puts mostly read only data in the right section
(read_mostly), to help sharing of these data between CPUS without
memory ping pongs.

On one of my production machine, tcp_statistics was sitting in a
heavily modified cache line, so *every* SNMP update had to force a
reload.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[LIB]: Make TEXTSEARCH_BM plain tristate like the others

And select it when the relevant modules are enabled.

Signed-off-by: David S. Miller <davem@davemloft.net>

[LIB]: Boyer-Moore extension for textsearch infrastructure strike #2

Attached the implementation of the Boyer-Moore string search
algorithm for the new textsearch infrastructure.

I've added as well a note about the limitations that this approach
presents, as Thomas has remarked.

Signed-off-by: Pablo Neira Ayuso <pablo@eurodev.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[LIST]: Add docbook header comments for hlist_add_{before,after}_rcu()

Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: net/802: more endian annotations

The rest of endian warnings now belongs to tr.c exclusively.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BNX2]: update version and minor fixes

Update version and add 4 minor fixes, the last 2 were suggested by
Jeff Garzik:

1. check for a valid ethernet address before setting it
2. zero out bp->regview if init_one encounters an error and unmaps
   the IO address. This prevents remove_one from unmapping again.
3. use netif_rx_schedule() instead of hand coding the same.
4. use IRQ_HANDLED and IRQ_NONE.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BNX2]: change irq locks to bh locks

Change all locks from spin_lock_irqsave() to spin_lock_bh(). All
places that require spinlocks are in BH context.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BNX2]: remove atomics in tx

Remove atomic operations in the fast tx path. Expensive atomic
operations were used to keep track of the number of available tx
descriptors. The new code uses the difference between the consumer
and producer index to determine the number of free tx descriptors.

As suggested by Jeff Garzik, the name of the inline function is
changed to all lower case.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BNX2]: speedup serdes linkup

This speeds up link-up time on 5706 SerDes if the link partner does
not autoneg, a rather common scenario in blade servers. Some blade
servers use IPMI for keyboard input and it's important to minimize
link disruptions.

The speedup is achieved by shortening the timer to (HZ / 3) during
the transient period right after initiating a SerDes autoneg. If
autoneg does not complete, parallel detect can be done sooner. After
the transient period is over, the timer goes back to its normal HZ
interval.

As suggested by Jeff Garzik, the timer initialization is moved to
bnx2_init_board() from bnx2_open().

An eeprom bit is also added to allow default forced SerDes speed for
even faster link-up time.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BNX2]: Fix rtnl deadlock in bnx2_close

This fixes an rtnl deadlock problem when flush_scheduled_work() is
called from bnx2_close(). In rare cases, linkwatch_event() may be on
the workqueue from a previous close of a different device and it will
try to get the rtnl lock which is already held by dev_close().

The fix is to set a flag if we are in the reset task which is run
from the workqueue. bnx2_close() will loop until the flag is cleared.
As suggested by Jeff Garzik, the loop is changed to call msleep(1)
instead of yield() in the original patch.

flush_scheduled_work() is also moved to bnx2_remove_one() before the
netdev is freed.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Convert FIB Trie to RCU.

* Removes RW-lock
* Proteced read functions uses
  rcu_dereference proteced with rcu_read_lock()
* writing of procted pointer w. rcu_assigen_pointer
* Insert/Replace atomic list_replace_rcu
* A BUG_ON condition removed.in trie_rebalance

With help from Paul E. McKenney.

Signed-off-by: Robert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Prepare FIB core for RCU.

* RCU versions of hlist_***_rcu
* fib_alias partial rcu port just whats needed now.

Signed-off-by: Robert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Module export of ip_rcv() no longer needed.

With ip_rcv nowhere outside the IP stack being used anymore it's
EXPORT_SYMBOL is not needed any longer either.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[AX25/NETROM/ROSE]: Kill net/ip.h inclusion

All these are claiming to include <net/ip.h> to get ip_rcv() but in
fact don't need the header at all, so away with the inclusion.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[AX25/NETROM]: Cleanup direct calls into IP stack

Get rid of the calls to ip_rcv and arp_rcv which were layering
violations anyway.  With those being replaced by netif_rx, less parts
of AX.25 and relatives depend on INET support actually being enabled.
This also will make PF_PACKET sockets work for IP and ARP packets
received over AX.25 and for IP packets over NET/ROM.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: FIB trie cleanup

This is a redo of earlier cleanup stuff:
* replace DBG() macro with pr_debug()
* get rid of duplicate extern's that are already in fib_lookup.h
* use BUG_ON and WARN_ON
* don't use BUG checks for null pointers where next statement would
  get a fault anyway
* remove debug printout when rebalance causes deep tree
* remove trailing blanks

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge /spare/repo/linux-2.6/

[DCCP]: Initial dccp_poll implementation

Tested with a patched netcat, no horror stories so far 8)

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Call the HC exit routines at dccp_v4_destroy_sock

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ICSK]: Generalise tcp_listen_poll

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Introduce dccp_get_info

And also hc_tx and hc_rx get_info functions for the CCIDs to fill in
information that is specific to them.

For now reusing struct tcp_info, later I'll try to figure out a better
solution, for now its really nice to get this kind of info:

[root@qemu ~]# ./ss -danemi
State       Recv-Q Send-Q  Local Addr:Port  Peer Addr:Port
LISTEN      0      0                *:5001          *:*     ino:628 sk:c1340040
         mem:(r0,w0,f0,t0) cwnd:0 ssthresh:0
ESTAB       0      0       172.20.0.2:5001 172.20.0.1:32785 ino:629 sk:c13409a0
         mem:(r0,w0,f0,t0) ts rto:1000 rtt:0.004/0 cwnd:0 ssthresh:0 rcv_rtt:61.377

This, for instance, shows that we're not congestion controlling ACKs,
as the above output is in the ttcp receiving host, and ttcp is a one
way app, i.e. the received never calls sendmsg, so
ccid_hc_tx_send_packet is never called, so the TX half connection
stays in TFRC_SSTATE_NO_SENT state and hctx_rtt is never calculated,
stays with the value set in ccid3_hc_tx_init, 4us, as show above in
milliseconds (0.004ms), upcoming patches will fix this.

rcv_rtt seems sane tho, matching ping results :-)

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Calculate the RTT in the RX half connection

Using TIMESTAMP_ECHO and ELAPSED_TIME options received.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Export dccp_insert_option_timestamp to CCIDs

And don't insert a TIMESTAMP option in all packets, leave the decision
to the CCIDs.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID]: Make ccid_hc_[rt]x_exit accept NULL arguments

Just like kfree, etc it will just not call the CCID exit
routines when the private data area is set to NULL.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Send a DATAACK packet when we have a TIMESTAMP_ECHO pending

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Fix skb leak in dccp_sendmsg

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Implement the CLOSING timer

So that we retransmit CLOSE/CLOSEREQ packets till they elicit an
answer or we hit a timeout.

Most of the machinery uses TCP approaches, this code has to be
polished & audited, but this is better than we had before.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Fix printf format warnings on 64-bit.

Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Add goto target

Originally written by Henrik Nordstrom <hno@marasystems.com>, taken
from netfilter patch-o-matic and added ip6_tables support.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Add IPv6 REJECT target

Originally written by Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>,
taken from netfilter patch-o-matic and fixed up to work with current
kernels.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Add string match

Signed-off-by: Pablo Neira Ayuso <pablo@eurodev.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Fix ackno setting in SYNC/SYNCACK packets

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Fix the ACK and SEQ window variables settings

This is from a first audit, more eyeballs are more than welcome.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Give more info on Step 6 failure debug printk

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Fix seqno setting in dccp_v4_ctl_send_reset

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CCID3]: Reintroduce ccid3hctx_t_rto

CCID3 keeps this variable in usecs, inet_connection_socks in jiffies,
so to avoid Mars orbiter losses lets reintroduce ccid3hctx_t_rto 8)

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: ip_finish_output() can be inlined

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Remove some dead code from ip_forward()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Avoid common branch mispredictions in ip_rcv_finish()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Move ip options parsing out of ip_rcv_finish()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Avoid common branch misprediction while checking csum in ip_rcv()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Consistency and whitespace cleanup of ip_rcv()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Fix ipl=>ihl typo in ip_fast_csum

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Add support for getting the permanent hardware address.

This patch adds a new field to net device to hold the permanent
hardware address, and adds a new generic ethtool_op function to
get that address.

Signed-off-by: Jon Wetzel <jon_wetzel@dell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: fix PROC_FS=n compile

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>