staging: most: hdm-dim2: relocate variable declarations

This patch eliminates nested variable declarations by putting them at
the beginning of the function in order to flatten the code.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: remove macro ENABLE_HDM_TEST

This patch removes the macro ENABLE_HDM_TEST, which was needed while
doing DIM2-HAL simulations. But these are not conducted anymore.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: fix channel configuration

The DIM2 HDM checks the parameters passed to the function
configure_channel() and adapts the buffer sizes of the configuration
according to the hardware limitation. This patch is needed to init
the HAL layer with the correct values.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Make ION_OF depend on OF_ADDRESS

The Ion platform code uses of_platform_device_create which has
dependencies on OF_ADDRESS. Depending on OF is not sufficient

Building sparc64:allmodconfig ... failed
--------------
Error log:
...
drivers/built-in.o: In function `ion_parse_dt':
(.text+0x11aa2c): undefined reference to `of_platform_device_create'

Add a dependency on OF_ADDRESS

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.9b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of iio new device support, features and cleanups for the 4.9 cycle.

New device support
* ad8801 dac
  - new driver supporting ad8801 and ad8803 DACs.
* adc12138
  - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
  - new driver
* mxc6255
  - add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
  - add support for the vz89te part which drops the voc_short channel and adds
    CRCs compared to other supported parts.

New features
* core
  - immutable triggers.  These effectively grant exclusive control over a
    trigger. The typical usecase is a device representing an analog part
    (perhaps a MUX) that needs to control the sampling of a downstream
    ADC.
  - resource managed trigger registration and triggered_buffer_init.
  - iio_push_event now protected against case of the event interface
    registration not having yet occured.  Only matters if an interrupt
    can occur during this window - might happen on shared interrupt lines.
  - helper to let a driver query if the trigger it is using is provided by
    itself (using the convention of both device and trigger having the same
    parent).
* tools
  - iio-utils. Used channel modifier scaling in preference to generic scaling
    when both exist.
* at91-adc
  - Add support for touchscreen switches closure time needed by some newer
    parts.
* stx104
  - support the ADC channels on this ADC/DAC board. As these are the primary
    feature of the board also move the driver to the iio/adc directory.
* sx9500
  - device tree bindings.

Cleanups / Fixes
* ad5755
  - fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
  - drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
  - avoid an unused functional warning due to rework in PM core code.
  - remove .owner field setting as done by i2c_core.
* ina2xx
  - clear out a left over debug field from chip global data.
* hid-sensors
  - avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
  - fix non static symbol warnings.
* ms5611
  - fetch and enable regulators unconditionally when they aren't optional.
* sca3000
  - whitespace cleanup.
* st_sensors
  - fetch and enable regulators unconditionally rather than having them
    supported as optional regulators (missunderstanding on my part amongst
    others a while back)
  - followup to previous patch fixes error checking on the regulators.
  - mark symbols static where possible.
  - use the 'is it my trigger' help function.  This prevents the odd case
    of another device triggering from the st-sensors trigger whilst the
    st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
  - add missing of_node_put.
* vz89x
  - rework to all support of new devices.
  - prevent reading of a corrupted buffer.
  - fixup a return value of 0/1 in a bool returning function.

Address updates
- Vlad Dogaru email address change.

staging: fwserial: fix checkpatch permission warnings

Fix the following warnings:
Symbolic permissions are not preferred. Consider using octal permissions.

Signed-off-by: Simon Chopin <chopin.simon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: Remove struct typedef

Remove typedef from structure tstrRSSI as using typedef for
structures is not preferred.
Found using coccinelle:

@r1@
type T;
@@

typedef struct { ... } T;

@script:python c1@
T2;
T << r1.T;
@@
if T[-2:] =="_t":
  coccinelle.T2 = T[:-2];
  print T
else:
  coccinelle.T2=T;

@r2@
type r1.T;
identifier c1.T2;
@@
-typedef
struct
+ T2
{ ... }
-T
;

@r3@
type r1.T;
identifier c1.T2;
@@
- T
+ struct T2

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme/devices: vme_user.c: fix: converted decimal permissions to octal

Ran checkpatch.pl -f vme_user.c
Fixed: ERROR: Use 4 digit octal (0777) not decimal permissions

Signed-off-by: Ryan Swan <ryan@ryanswan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gs_fpga_boot: Remove multiple blank lines

This patch fixes the following checkpatch warning for the gs_fpgaboot
driver:
CHECK: Please don't use multiple blank lines.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Remove the explicit NULL comparison

The patch removes the explicit null comparisons entirely for the ks7010 driver.
This was detected by checkpatch.pl

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: netlogic: Make net_device_ops const

This patch fixes the checkpatch.pl warning:

WARNING: struct net_device_ops should normally be const

Signed-off-by: Mike Kofron <mpkofron@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Remove unused function vnt_key_init_table

The function vnt_key_init_table is not used anywhere in the kernel.
Therefore, remove the function definition and prototype.
Grepped to find occurences.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: add new line after struct declaration

checkpatch generates a warning for no blank line after struct
declaration. Inserted a new line.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: core: constify structure member

This patch adds the const qualifier to the declaration of the member
name_suffix of structure most_channel_capability. It is needed since it
points to string literals.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: core: show all linked channels

This patch is needed to have all linked channels being reported by the
show() function of the attribute file add_link. Currently user space can
only read back the latest link that has been established to a certain
channel.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: drivers: Delete NULL check before pci_dev_put

The function pci_dev_put checks whether its argument is NULL and returns
immediately. Therefore, NULL test before the call if not needed.
Found using coccinelle:
@@
expression x;
@@

- if(x)
- pci_dev_put(x);
+ pci_dev_put(x);

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: coding style fixes

- Fixed coding style in comedi_fops.c Symbolic to octal permission.

Signed-off-by: Matias Mucciolo <mmucciolo@suteba.org.ar>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Add spaces around the '*' operator

This patch fixes the checkpatch.pl warning:
Spaces required around the '*' operator.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix block comments

This patch fixes the following checkpatch.pl warning:
Block comments use * on subsequent lines

Signed-off-by: Shaily Sangwan <shaily15297@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix coding style error reported from checkpatch

removed the following:
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
WARNING: Statements should start on a tabstop

Signed-off-by: Omri Arad <omriarad3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: mxc6255: Fix chip-id check

The initial commit adding support for the mxc6225 assumed the
mxc6225 has a chip-id of 0xe5 based on testing on a single Allwinner
A23 tablet with a mxc6225. Testing on a bunch of other Allwinner
tablets have shown that the chip-id for the mxc6225 is not constant.

A datasheet for the MXC6255 which I've found online says that bits
7 and 6 of the chip-id register are undefined (for the mxc6255), testing
on 5 different tablets with a mxc6225 has found the following ids:
0x25, 0x45, 0x65, 0x85, 0xe5. So it seems that for the mxc6225 bits
7, 6 and 5 of the chip-id register are undefined.

This commit adjusts the chip-id check so that the mxc6255 driver
properly recognizes the mxc6225 in all these tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: unisys: visorbus: cleanup include listings

Cleaned up include section of files so that they only
include the files needed by them. If an include file includes
the file already don't repeat it.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: merge guestlinuxdebug with vmcallinterface.h

Merge guestlinuxdebug into vmcallinterface.h since it is dependent on it

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove check for GNUC

The check for GNUC is redundant and is not needed for vmcallinterface.h.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Move non global guestlinuxdebug to visorbus

Guestlinuxdebug.h is only used by visorbus, move the include file
into its directory instead of the global one.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove include for vbuschannel.h

visorbus_main.c does not need to include vbuschannel.h.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Merge iovmcall_gnuc into vmcallinterface

iovmcall_gnuc was only being referenced by vmcallinterface, so merge
them together.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: merge vbusdeviceinfo.h into vbuschannel

vbusdeviceinfo.h was only used by vbuschannel.h so merge them
together.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Reorder functions to avoid including header

Visorchannel does not need to include visorbus_private.h; all it was
using it for was function prototypes. A simple reorder causes it to
no longer need to include it.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Merge controlvm completion status to controlvmchannel

The completion status are valid only for the controlvm channel
so they should be moved into its header file.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: merge diagchannel.h to visorbus.h

It is pointless to have a dedicated include for another
include. So I merged them together.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorinput: Remove ultrainputreport.h include

Stop ultrainputreport.h from including itself.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorinput: Update visorinput.c includes

Remove unnecessary channel.h include from visorinput.c.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Merge channel_guid.h with channel.h

Merges the contents of channel_guid.h with channel.h, as the former was
not a proper header file. Therefore, the channel_guid.h is no longer
needed.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Convert visorchipset.h refs

visorbus_private.h was previously named visorchipset.h. This patch removes
references to the old filename, and updates them with the new filename.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move vbushelper.h contents to visorbus_private.h

The contents of vbushelper.h are now only used by visorbus, so it no longer
needs to be a general include file and it can be incorporated in the
visorbus private header.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove putfile_buffer_entry

This patch removes the unused struct putfile_buffer_entry.

Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove unused lists

This patch removes the following lists that were never used:
LIST_HEAD(bus_info_list)
LIST_HEAD(dev_info_list)
LIST_HEAD(putfile_request_list)

Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove g_devicechangestate_packet

This patch removes the unused
struct controlvm_message_packet g_devicechangestate_packet.
The struct is set but never called.

Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic_main.c remove unused pound defines

This removes two unused pound defines in the visornic_main.c
file.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus_main.c remove unused pound defines

This removes two unused pound defines in the visorbus_main.c
file.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset.c remove unused pound defines

This removes three unused pound defines in the visorchipset.c
file.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: dgnc_sysfs *_ATTR() macros convert

Convert DRIVER_ATTR() macro with DRIVER_ATTR_RO/RW and
DEVICE_ATTR() macro with DEVICE_ATTR_RO()

Signed-off-by: Matias Mucciolo <mmucciolo@suteba.org.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix multi line comment alignment

Fix alignment in multi line comment block.

Remove extra '*' to use the preferred comment style as in Documentation/CodingStyle

Signed-off-by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: stop using cvmx_helper_link_autoconf()

Stop using cvmx_helper_link_autoconf(). We want to remove it in the future,
as it duplicates link state information into platform code for no reason.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: changed definition of DIDmib_dot11smt_dot11WEPDefaultKeysTable_key() macro

This patch changes definition of
DIDmib_dot11smt_dot11WEPDefaultKeysTable_key()
macro and uses DIDmib_dot11smt_dot11WEPDefaultKeysTable instead of
using directly (P80211DID_MKSECTION(1) | P80211DID_MKGROUP(4)).

Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key() macro instead of DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3

This patch removes
DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3
macro and uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key()
instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key() macro instead of DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2

This patch removes
DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2
macro and uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key()
instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key() macro instead of DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1

This patch removes
DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1
macro and uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key()
instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key() macro instead of DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0

This patch removes
DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0
macro and uses DIDmib_dot11smt_dot11WEPDefaultKeysTable_key()
instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Correctly set CLOCK_PHASE bit of display controller.

Commit 6fba39cf32a3 ("staging: sm750fb: use BIT macro for
PANEL_DISPLAY_CTRL single-bit fields") accidentally changed the
CLOCK_PHASE logic from '|=' to '=' which clears all the previously set
bits.

Fixes: 6fba39cf32a3 ("staging: sm750fb: use BIT macro for PANEL_DISPLAY_CTRL single-bit fields")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup: Add spinlock in synth_direct_store

All operations with synth buffer should be protected,
as there are global pointers, which should be modified atomically.

Found by Linux Driver Verification project (linuxtesting.org)

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Acked-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unused debugging functions

These functions were only mentioned in the rtw_proc_init_one()
function in drivers/staging/rtl8188eu/os_dep/os_intfs.c, which was
under #if 0 and has now been removed completely.

As they are not used anywhere, and also violate the coding style
rules, remove them.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Cc: Chris Elliott <chris@uksysadmin.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove useless include

Since the removal of rtw_proc_init_one() the proc filesystem is not
mentioned in this driver. So this include becomes useless.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Binoy Jayan <binoy.jayan@linaro.org>
Cc: Anish Bhatt <anish@gatech.edu>
Cc: "Rémy Oudompheng" <remyoudompheng@gmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove rtw_proc_{init,remove}_one

rtw_proc_init_one() and rtw_proc_remove_one() are two very long
functions that are supposed to create a bunch of proc entries to
access debugging features of the driver.

But both of them are under #if 0 since their first commit three years
ago (5adef66acf73705ae95ea0b1e6b5fc7f17d82d30), replaced by two empty
functions.

Should they be moved out of #if 0 thay would not even compile, as they
used functions that have been removed years ago
(create_proc_read_entry()) and they use variables that are not defined
(e.g. rtw_proc_cnt).

rtw_proc_init_one() mentions several other functions that are not
mentioned anywhere else in the kernel tree. Thus, after the present
patch, all of those other functions can be cleanly removed as well, as
they will be not mentioned anymore, not even in disabled code.

Subsequent commits remove those other functions.

Should anybody want to implement (in a proper way) the mentioned
debugging features, they can still fetch this code from the git
history.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Cc: Binoy Jayan <binoy.jayan@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Rémy Oudompheng" <remyoudompheng@gmail.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: declare internal function as static

This function is only used inside rtw_recv.c. Which is quite logical,
since it's a timer callback: it is passed as the _fn argument to
setup_timer(). So it is internal to rtw_recv.c and should be static.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geliang Tang <geliangtang@163.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Cc: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unimplemented functions declaration

These functions have been declared without any implementation since
the first commit (58c434013a22fccfdb14abc2bb8408ca29073b76) and there
has been no mention of them in following commits.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: ioctl_linux: Clean up if function returned NULL on failure.

Clean some all functions to return NULL on failure.
Used !x instead of x==NULL.

Signed-off-by: Amit Ghadge <amitg.b14@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: mark symbols static where possible

We get a few warnings when building kernel with W=1:
drivers/staging/rtl8192e/rtllib_softmac.c:279:13: warning: no previous declaration for 'softmac_ps_mgmt_xmit' [-Wmissing-declarations]
drivers/staging/rtl8192e/rtllib_softmac.c:773:24: warning: no previous declaration for 'rtllib_authentication_req' [-Wmissing-declarations]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.

In addition, some of these functions are declared in different files,
it looks like that we need to clean the codes of this driver up,
but we can repress these warnings first, then clean it up.

so this patch marks these functions with 'static' now.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: do not use undefined $(TOPDIR) in Makefile

drivers/staging/rtl8192u/ieee80211/Makefile uses $(TOPDIR) to configure
an include directory, without defining this variable first. The path
which is configured is therefore "/drivers/net/wireless", which does not
seem to be the intended path.

Remove the offending line.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: obdclass: Modify return statement

Modify the return statement.
The Coccinelle semantic patch used to make this change is as follows:

@@
expression e, ret;
@@

-ret =
+return
     e;
-return ret;

Delete the declaration of the return variable rc, as it is no longer used.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: add missing header dependencies

We get 1 warning when building kernel with W=1:
drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:157:5: warning: no previous prototype for 'obd_sysctl_init' [-Wmissing-prototypes]

In fact, this function is declared in ../../include/obd_class.h,
so this patch add missing header dependencies.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Remove unnecessary blank line

This patch fixes the checkpatch.pl warning:
Blank lines aren't necessary before a close brace '}'

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Convert hi6220 to common platform

Now that we have common devicetree bindings, convert hisilicon
platform to use the binding and parsing methods.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: Add files for parsing the devicetree

Devicetree is the preferred mechanism for platform definition
these days. Add a set of files for supporting Ion with devicetree.
This includes a set of bindings for heaps common across all
devices and parsing methods. Clients may use the standard
bindings or they can call the parsing functions along with
their own parsing for platform specific heaps.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devicetree: bindings for Ion

This adds a base set of devicetree bindings for the Ion memory
manager. This supports setting up the generic set of heaps and
their properties.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Add ioctl to query available heaps

Ion clients currently lack a good method to determine what
heaps are available and what ids they map to. This leads
to tight coupling between user and kernel space and headaches.
Add a query ioctl to let userspace know the availability of
heaps.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: checkpatch cleanup: block comments using a trailing */

Fix checkpatch.pl warning "Block comments use a trailing */ on
a separate line" on multiple files of the driver by editing the
affected comments.

Signed-off-by: Raphaël Beamonte <raphael.beamonte@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: constify local structures

For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.

Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: gdm_lte: Constify gdm_netdev_ops

Fix the following checkpatch.pl warning:
WARNING: struct net_device_ops should normally be const
+static struct net_device_ops gdm_netdev_ops = {

Signed-off-by: Imre Deak <imre.deak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove HalFunc member of adapter structure

hal_ops structure is empty.
Also remove hal_ops definition.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove hal_reset_security_engine member of hal_ops structure

hal_reset_security_engine always is NULL.
Also rtw_hal_reset_security_engine function removed.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove interrupt_handler member of hal_ops structure

interrupt_handler does not used.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove hal_set_hal_ops macro

hal_set_hal_ops is a trivial wrapper for rtl8188eu_set_hal_ops.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtl8188e_set_hal_ops function

rtl8188e_set_hal_ops do nothing.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188e_free_hal_data to rtw_hal_free_data

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188e_init_dm_priv to rtw_hal_dm_init

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename ReadChipVersion8188E to rtw_hal_read_chip_version

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename phy_set_bw_mode to rtw_hal_set_bwmode

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename phy_sw_chnl to rtw_hal_set_chan

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188e_HalDmWatchDog to rtw_hal_dm_watchdog

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188e_Add_RateATid to rtw_hal_add_ra_tid

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename AntDivBeforeLink8188E to rtw_hal_antdiv_before_linked

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename AntDivCompare8188E to rtw_hal_antdiv_rssi_compared

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename phy_query_rf_reg to rtw_hal_read_rfreg

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename sreset_init_value to rtw_hal_sreset_init

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove sreset_get_wifi_status of hal_ops structure

Driver does not use it.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188e_SetHalODMVar to rtw_hal_set_odm_var

And remove many one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename hal_notch_filter_8188e to rtw_hal_notch_filter

And remove many one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_InitPowerOn to rtw_hal_power_on

And remove many one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove hal_init member of hal_ops structure

It is unnecessary wrapper for rtl8188eu_hal_init function.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove hal_deinit member of hal_ops structure

It is unnecessary wrapper for rtl8188eu_hal_deinit function.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_inirp_init to rtw_hal_inirp_init

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename usb_read_port_cancel to rtw_hal_inirp_deinit

And remove three one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_init_xmit_priv to rtw_hal_init_xmit_priv

 And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_init_recv_priv to rtw_hal_init_recv_priv

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_free_recv_priv to rtw_hal_free_recv_priv

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_InitSwLeds to rtw_hal_sw_led_init

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_DeInitSwLeds to rtw_hal_sw_led_deinit

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename rtl8188eu_init_default_value to rtw_hal_def_value_init

And remove two one-line wrappers.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>