drm/i915: Use the correct crtc when sanitizing plane mapping

When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.

To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.

One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.

v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
    Add Daniel's proposed comment to better document why we do this
    Drop the redundant intel_set_plane_visible() call

Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 62358aa4ee86481ce044bef04859820e1bc7c1d9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Restore vblank interrupts earlier

Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.

v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)

Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com
(cherry picked from commit 68bc30deac625b8be8d3950b30dc93d09a3645f5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Check fb stride against plane max stride

commit 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check()
functions") removed the plane max stride check for sprite planes.
I was going to add it back when introducing GTT remapping for the
display, but after further thought it seems better to re-introduce
it separately.

So let's add the max stride check back. And let's do it in a nicer
form than what we had before and do it for all plane types (easy
now that we have the ->max_stride() plane vfunc).

Only sprite planes really need this for now since primary planes
are capable of scanning out the current max fb size we allow, and
cursors have more stringent stride checks elsewhere.

Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check() functions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918140243.12207-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit fc3fed5d297b51f9e2c7d4f969c95c0d6e50ca57)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-next

 Add a new list.h helper for doing bulk updates.  Used by ttm.
- Fixes for display underflow on VI APUs at 4K with UVD running
- Endian fixes for powerplay on vega
- DC fixes for interlaced video
- Vega20 powerplay fixes
- RV/RV2/PCO powerplay fixes
- Fix for spurious ACPI events on HG laptops
- Fix a memory leak in DC on driver unload
- Fixes for manual fan control mode switching
- Suspend/resume robustness fixes
- Fix display handling on RV2
- VCN fixes for DPG on PCO
- Misc code cleanups and warning fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011014739.3117-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2018-10-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Fix build failure without CONFIG_DRM_FBDEV_EMULATION (Arnd)
- Add Maxime to drm-misc maintainer group (Sean)

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010203951.GA229456@art_vandelay

Merge branch 'mediatek-drm-next-4.20' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next

This include hdmi output support for mt2701 and mt7623.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538616148.28906.1.camel@mtksdaap41

Merge branch 'linux-4.20' of git://github.com/skeggsb/linux into drm-next

Just initial HDMI 2.0 support, and a bunch of other cleanups.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA=mgEm9JxP7AX7Sff-AEs7a75M4SqwFHmLPZhJojm4k=OA@mail.gmail.com

drm/nouveau/secboot/acr: fix memory leak

In case memory resources for *bl_desc* were allocated, release
them before return.

Addresses-Coverity-ID: 1472021 ("Resource leak")
Fixes: 0d466901552a ("drm/nouveau/secboot/acr: Remove VLA usage")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp: take sink support into account for exposing 594mhz

Scrambling is required for supporting any mode over 340MHz. If it's not
supported, reject any modes that would require it.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp: add support for setting scdc parameters for high modes

When SCDC is supported, make sure that we configure the GPU and monitor
to the same parameters.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp: keep track of high-speed state, program into clock

The register programmed by the clock method needs to contain a different
setting for the link speed as well as special divider settings.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp/gm200-: add scdc parameter setter

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp: add a way to configure scrambling/tmds for hdmi 2.0

High pixel clocks are required to use a 40 TMDS divider instead of 10,
and even low ones may optionally use scrambling depending on device
support.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Start using new drm_dev initialization helpers

Per the documentation in drm_get_pci_dev(), this function is deprecated
and shouldn't be used anymore. As it turns out, we're going to need to
stop using drm_get_pci_dev() anyway in order to allow us to turn off the
card before full system shutdowns, otherwise we'll hit race conditions
with userspace while trying to tear down the card on shutdown.

So, start using drm_dev_get() and drm_dev_put(), and just turn our
load/unload callbacks into open coded init/fini() functions.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Fix potential memory leak in nouveau_drm_load()

We forget to free drm in all instances of failure, and additionally also
forget to destroy the master client if the other client fails
initialization.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Refactor nvXX_backlight_init()

There's literally no difference between any of the backlight init
functions besides the backlight properties they set and the backlight
callbacks that they set, so move all of the duplicated backlight init
code out of there and into nouveau_backlight_init().

This gets rid of a lot of copy pasta!

Changes since v1:
- Some of the pre-refactor callbacks were storing nv_encoder in callback
  data for the backlight devices that they registered, as opposed to
  nouveau_drm. This got missed and caused some bugs that didn't
  originally appear on my setup (NULL kernel derefs) for some reason.
  So, fix this by finding the nouveau_encoder in
  nouveau_backlight_init(), and using that as the callback data for all
  gens instead even if they don't care about the encoder.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jeffery Miller <jmiller@neverware.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Cleanup indenting in nouveau_backlight.c

Still no functional changes.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/drm/nouveau: s/nouveau_backlight_exit/nouveau_backlight_fini/

More consistent with the rest of the codebase, no functional changes
here.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Move backlight device into nouveau_connector

Currently module unloading is broken in nouveau due to a rather annoying
race condition resulting from nouveau_backlight.c having gone a bit
stale over time:

[ 1960.791143] ==================================================================
[ 1960.791394] BUG: KASAN: use-after-free in nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.791460] Read of size 4 at addr ffff88075accf350 by task zsh/11185
[ 1960.791521]
[ 1960.791545] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G           O      4.18.0Lyude-Test+ #4
[ 1960.791580] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018
[ 1960.791628] Call Trace:
[ 1960.791680]  dump_stack+0xa4/0xfd
[ 1960.791721]  print_address_description+0x71/0x239
[ 1960.791833]  ? nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.791877]  kasan_report.cold.6+0x242/0x2fe
[ 1960.791919]  __asan_report_load4_noabort+0x19/0x20
[ 1960.792012]  nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.792081]  nouveau_display_destroy+0x76/0x150 [nouveau]
[ 1960.792150]  nouveau_drm_device_fini+0xb7/0x190 [nouveau]
[ 1960.792265]  nouveau_drm_device_remove+0x14b/0x1d0 [nouveau]
[ 1960.792347]  ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau]
[ 1960.792378]  ? trace_hardirqs_on_caller+0x38b/0x570
[ 1960.792406]  ? trace_hardirqs_on+0xd/0x10
[ 1960.792472]  nouveau_drm_remove+0x37/0x50 [nouveau]
[ 1960.792502]  pci_device_remove+0x112/0x2d0
[ 1960.792530]  ? pcibios_free_irq+0x10/0x10
[ 1960.792558]  ? kasan_check_write+0x14/0x20
[ 1960.792587]  device_release_driver_internal+0x35c/0x650
[ 1960.792617]  device_release_driver+0x12/0x20
[ 1960.792643]  pci_stop_bus_device+0x172/0x1e0
[ 1960.792671]  pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 1960.792715]  remove_store+0xcb/0xe0
[ 1960.792753]  ? sriov_numvfs_store+0x2e0/0x2e0
[ 1960.792779]  ? __lock_is_held+0xb5/0x140
[ 1960.792808]  ? component_add+0x530/0x530
[ 1960.792834]  dev_attr_store+0x3f/0x70
[ 1960.792859]  ? sysfs_file_ops+0x11d/0x170
[ 1960.792885]  sysfs_kf_write+0x104/0x150
[ 1960.792915]  ? sysfs_file_ops+0x170/0x170
[ 1960.792940]  kernfs_fop_write+0x24f/0x400
[ 1960.792978]  ? __lock_acquire+0x6ea/0x47f0
[ 1960.793021]  __vfs_write+0xeb/0x760
[ 1960.793048]  ? kernel_read+0x130/0x130
[ 1960.793076]  ? __lock_is_held+0xb5/0x140
[ 1960.793107]  ? rcu_read_lock_sched_held+0xdd/0x110
[ 1960.793135]  ? rcu_sync_lockdep_assert+0x78/0xb0
[ 1960.793162]  ? __sb_start_write+0x183/0x220
[ 1960.793189]  vfs_write+0x14d/0x4a0
[ 1960.793229]  ksys_write+0xd2/0x1b0
[ 1960.793255]  ? __ia32_sys_read+0xb0/0xb0
[ 1960.793298]  ? fput+0x1d/0x120
[ 1960.793324]  ? filp_close+0xf3/0x130
[ 1960.793349]  ? entry_SYSCALL_64_after_hwframe+0x59/0xbe
[ 1960.793380]  __x64_sys_write+0x73/0xb0
[ 1960.793407]  do_syscall_64+0xaa/0x400
[ 1960.793433]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.793460] RIP: 0033:0x7f59df433164
[ 1960.793486] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 1960.793541] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1960.793576] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164
[ 1960.793620] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001
[ 1960.793665] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80
[ 1960.793696] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760
[ 1960.793730] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002
[ 1960.793768]
[ 1960.793790] Allocated by task 11167:
[ 1960.793816]  save_stack+0x43/0xd0
[ 1960.793841]  kasan_kmalloc+0xc4/0xe0
[ 1960.793880]  kasan_slab_alloc+0x11/0x20
[ 1960.793905]  kmem_cache_alloc+0xd7/0x270
[ 1960.793944]  getname_flags+0xbd/0x520
[ 1960.793969]  user_path_at_empty+0x23/0x50
[ 1960.793994]  do_faccessat+0x1fc/0x5d0
[ 1960.794018]  __x64_sys_access+0x59/0x80
[ 1960.794043]  do_syscall_64+0xaa/0x400
[ 1960.794067]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.794093]
[ 1960.794127] Freed by task 11167:
[ 1960.794152]  save_stack+0x43/0xd0
[ 1960.794190]  __kasan_slab_free+0x139/0x190
[ 1960.794215]  kasan_slab_free+0xe/0x10
[ 1960.794239]  kmem_cache_free+0xcb/0x2c0
[ 1960.794264]  putname+0xad/0xe0
[ 1960.794287]  filename_lookup.part.59+0x1f1/0x360
[ 1960.794313]  user_path_at_empty+0x3e/0x50
[ 1960.794338]  do_faccessat+0x1fc/0x5d0
[ 1960.794362]  __x64_sys_access+0x59/0x80
[ 1960.794393]  do_syscall_64+0xaa/0x400
[ 1960.794421]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.794461]
[ 1960.794483] The buggy address belongs to the object at ffff88075acceac0
[ 1960.794483]  which belongs to the cache names_cache of size 4096
[ 1960.794540] The buggy address is located 2192 bytes inside of
[ 1960.794540]  4096-byte region [ffff88075acceac0, ffff88075accfac0)
[ 1960.794581] The buggy address belongs to the page:
[ 1960.794609] page:ffffea001d6b3200 count:1 mapcount:0 mapping:ffff880778e4b1c0 index:0x0 compound_mapcount: 0
[ 1960.794651] flags: 0x8000000000008100(slab|head)
[ 1960.794679] raw: 8000000000008100 ffffea001d39e808 ffffea001d39ea08 ffff880778e4b1c0
[ 1960.794739] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 1960.794785] page dumped because: kasan: bad access detected
[ 1960.794813]
[ 1960.794834] Memory state around the buggy address:
[ 1960.794861]  ffff88075accf200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794894]  ffff88075accf280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794925] >ffff88075accf300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794956]                                                  ^
[ 1960.794985]  ffff88075accf380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.795017]  ffff88075accf400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.795061] ==================================================================
[ 1960.795106] Disabling lock debugging due to kernel taint
[ 1960.795131] ------------[ cut here ]------------
[ 1960.795148] ida_remove called for id=1802201963 which is not allocated.
[ 1960.795193] WARNING: CPU: 7 PID: 11185 at lib/idr.c:521 ida_remove+0x184/0x210
[ 1960.795213] Modules linked in: nouveau(O) mxm_wmi ttm i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev vfat fat intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul iTCO_wdt psmouse wmi_bmof mei_me tpm_tis mei tpm_tis_core tpm i2c_i801 thinkpad_acpi pcc_cpufreq crc32c_intel serio_raw xhci_pci xhci_hcd wmi video i2c_dev i2c_core
[ 1960.795305] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G    B      O      4.18.0Lyude-Test+ #4
[ 1960.795330] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018
[ 1960.795352] RIP: 0010:ida_remove+0x184/0x210
[ 1960.795370] Code: 4c 89 f7 e8 ae c8 00 00 eb 22 41 83 c4 02 4c 89 e8 41 83 fc 3f 0f 86 64 ff ff ff 44 89 fe 48 c7 c7 20 94 1e 83 e8 54 ed 81 fe <0f> 0b 48 b8 00 00 00 00 00 fc ff df 48 01 c3 c7 03 00 00 00 00 c7
[ 1960.795402] RSP: 0018:ffff88074d4df7b8 EFLAGS: 00010082
[ 1960.795421] RAX: 0000000000000000 RBX: 1ffff100e9a9befa RCX: ffffffff81479975
[ 1960.795440] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88077c1de690
[ 1960.795460] RBP: ffff88074d4df878 R08: ffffed00ef83bcd3 R09: ffffed00ef83bcd2
[ 1960.795479] R10: ffffed00ef83bcd2 R11: ffff88077c1de697 R12: 000000000000036b
[ 1960.795498] R13: 0000000000000202 R14: ffffffffa0aa7fa0 R15: 000000006b6b6b6b
[ 1960.795518] FS:  00007f59e0995b80(0000) GS:ffff88077c1c0000(0000) knlGS:0000000000000000
[ 1960.795553] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1960.795571] CR2: 00007f59e09a2010 CR3: 00000004a1a70005 CR4: 00000000003606e0
[ 1960.795596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1960.795629] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1960.795649] Call Trace:
[ 1960.795667]  ? ida_destroy+0x1d0/0x1d0
[ 1960.795686]  ? kasan_check_write+0x14/0x20
[ 1960.795704]  ? do_raw_spin_lock+0xc2/0x1c0
[ 1960.795724]  ida_simple_remove+0x26/0x40
[ 1960.795794]  nouveau_backlight_exit+0x9d/0x150 [nouveau]
[ 1960.795867]  nouveau_display_destroy+0x76/0x150 [nouveau]
[ 1960.795930]  nouveau_drm_device_fini+0xb7/0x190 [nouveau]
[ 1960.795989]  nouveau_drm_device_remove+0x14b/0x1d0 [nouveau]
[ 1960.796047]  ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau]
[ 1960.796067]  ? trace_hardirqs_on_caller+0x38b/0x570
[ 1960.796089]  ? trace_hardirqs_on+0xd/0x10
[ 1960.796146]  nouveau_drm_remove+0x37/0x50 [nouveau]
[ 1960.796167]  pci_device_remove+0x112/0x2d0
[ 1960.796186]  ? pcibios_free_irq+0x10/0x10
[ 1960.796218]  ? kasan_check_write+0x14/0x20
[ 1960.796237]  device_release_driver_internal+0x35c/0x650
[ 1960.796257]  device_release_driver+0x12/0x20
[ 1960.796289]  pci_stop_bus_device+0x172/0x1e0
[ 1960.796308]  pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 1960.796328]  remove_store+0xcb/0xe0
[ 1960.796345]  ? sriov_numvfs_store+0x2e0/0x2e0
[ 1960.796364]  ? __lock_is_held+0xb5/0x140
[ 1960.796383]  ? component_add+0x530/0x530
[ 1960.796401]  dev_attr_store+0x3f/0x70
[ 1960.796419]  ? sysfs_file_ops+0x11d/0x170
[ 1960.796436]  sysfs_kf_write+0x104/0x150
[ 1960.796454]  ? sysfs_file_ops+0x170/0x170
[ 1960.796471]  kernfs_fop_write+0x24f/0x400
[ 1960.796488]  ? __lock_acquire+0x6ea/0x47f0
[ 1960.796520]  __vfs_write+0xeb/0x760
[ 1960.796538]  ? kernel_read+0x130/0x130
[ 1960.796556]  ? __lock_is_held+0xb5/0x140
[ 1960.796590]  ? rcu_read_lock_sched_held+0xdd/0x110
[ 1960.796608]  ? rcu_sync_lockdep_assert+0x78/0xb0
[ 1960.796626]  ? __sb_start_write+0x183/0x220
[ 1960.796648]  vfs_write+0x14d/0x4a0
[ 1960.796666]  ksys_write+0xd2/0x1b0
[ 1960.796684]  ? __ia32_sys_read+0xb0/0xb0
[ 1960.796701]  ? fput+0x1d/0x120
[ 1960.796732]  ? filp_close+0xf3/0x130
[ 1960.796749]  ? entry_SYSCALL_64_after_hwframe+0x59/0xbe
[ 1960.796768]  __x64_sys_write+0x73/0xb0
[ 1960.796800]  do_syscall_64+0xaa/0x400
[ 1960.796818]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.796836] RIP: 0033:0x7f59df433164
[ 1960.796854] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 1960.796884] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1960.796906] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164
[ 1960.796926] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001
[ 1960.796946] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80
[ 1960.796966] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760
[ 1960.796985] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002
[ 1960.797008] irq event stamp: 509990
[ 1960.797026] hardirqs last  enabled at (509989): [<ffffffff8119ff78>] flush_work+0x4b8/0x6d0
[ 1960.797063] hardirqs last disabled at (509990): [<ffffffff8297c395>] _raw_spin_lock_irqsave+0x25/0x60
[ 1960.797085] softirqs last  enabled at (509744): [<ffffffff82c005ad>] __do_softirq+0x5ad/0x8c0
[ 1960.797121] softirqs last disabled at (509735): [<ffffffff8115aa15>] irq_exit+0x1a5/0x1e0
[ 1960.797142] ---[ end trace fb1342325f1846b8 ]---

While I haven't actually gone into the details of what's causing this to
happen (maybe the kernel removes the backlight device in the device core
before we get to it?), it doesn't really matter anyway because the way
nouveau handles backlights has long since been deprecated.

According to the documentation on the drm_connector->late_register()
hook, the ->late_register() hook should be used for adding extra
connector-related devices. Vice versa, the ->early_unregister() hook is
meant to be used for removing those devices.

So: gut nouveau_drm->bl_list and nouveau_drm->backlight, and replace
them with per-connector backlight structures. Additionally, move
backlight registration/teardown into the ->late_register() and
->early_unregister() hooks so that DRM can give us a chance to remove
the backlight before the connector is even removed. This appears to fix
the problem once and for all.

Changes since v2:
- Use NV_INFO_ONCE for printing GMUX information, since otherwise this
  will end up printing that message for as many times as we have
  connectors

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Add NV_PRINTK_ONCE and variants

Since we're about to use this in nouveau_backlight.c. Same thing as
DRM_WARN_ONCE, DRM_INFO_ONCE, etc...

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Check backlight IDs are >= 0, not > 0

Remember, ida IDs start at 0, not 1!

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

list: introduce list_bulk_move_tail helper

Move all entries between @first and including @last before @head.

This is useful for LRU lists where a whole block of entries should be
moved to the end of the list.

Used as a band aid in TTM, but better placed in the common list headers.

Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: factor out some pptable helpers

Move copy_array helpers to smu_helper.c and share between
vega12 and vega20.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: endian fixes for vega20_processpptables.c

Properly swap data from vbios.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: endian fixes for vega12_processpptables.c

Properly swap data from vbios.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: endian fixes for vega10_processpptables.c

Properly swap data from vbios.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove set but not used variable 'header'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c: In function 'amdgpu_ucode_init_bo':
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:431:39: warning:
 variable 'header' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove set but not used variable 'ring' in psp_v11_0_ring_stop

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/psp_v11_0.c: In function 'psp_v11_0_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v11_0.c:309:19: warning:
 variable 'ring' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove set but not used variable 'preempt_all_queues'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c: In function 'destroy_queue_cpsch':
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c:1366:7: warning:
 variable 'preempt_all_queues' set but not used [-Wunused-but-set-variable]

It never used since introduct in
commit 992839ad64f2 ("drm/amdkfd: Add static user-mode queues support")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: fix missing break in switch statements

There are several switch statements that are missing break statements.
Add missing breaks to handle any fall-throughs corner cases.

Detected by CoverityScan, CID#1457175 ("Missing break in switch")

Fixes: 18aafc59b106 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Suppress keypresses from ACPI_VIDEO events

Currently we return NOTIFY_DONE for any event which we don't think is
ours. However, many laptops will send more then just an ATIF event and
will also send an ACPI_VIDEO_NOTIFY_PROBE event as well. Since we don't
check for this, we return NOTIFY_DONE which causes a keypress for the
ACPI event to be propogated to userspace. This is the equivalent of
someone pressing the display key on a laptop every time there's a
hotplug event.

So, check for ACPI_VIDEO_NOTIFY_PROBE events and suppress keypresses
from them.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove the direct fw loading support for sdma2.4

sdma2.4 is only for iceland. For Vi, we don't maintain the
direct fw loading.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove wrong fw loading type warning

Remove the warning message:
"-1 is not supported on VI"
the -1 is the default fw load type, mean auto.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Load fw between hw_init/resume_phase1 and phase2

Extract the function of fw loading out of powerplay.
Do fw loading between hw_init/resuem_phase1 and phase2

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split ip hw_init into 2 phases

We need to do some IPs earlier to deal with ordering issues
similar to how resume is split into two phases.

Will do fw loading via smu/psp between the two phases.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove amdgpu_ucode_fini_bo

The variable clean is unnecessary.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Split amdgpu_ucode_init/fini_bo into two functions

1. one is for create/free bo when init/fini
2. one is for fill the bo before fw loading

the ucode bo only need to be created when load driver
and free when driver unload.

when resume/reset, driver only need to re-fill the bo
if the bo is allocated in vram.

Suggested by Christian.

v2: Return error when bo create failed.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Check late_init status before set cg/pg state

Fix cg/pg unexpected set in hw init failed case.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refine function amdgpu_device_ip_late_init

1. only call late_init when hw_init successful,
   so check status.hw instand of status.valid in late_init.
2. set status.late_initialized true if late_init was not implemented.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change AI gfx/sdma/smu init sequence

initialize gfx/sdma before dpm features enabled.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence

initialize gfx/sdma before dpm features enabled.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Limit the max mc address to hole start

For the vram_start is 0 case, the gart range will be from 0x0000FFFF00000000
to 0x0000FFFF1FFFFFFF, which will cause the engine hang.

So to avoid the hole, limit the max mc address to AMDGPU_GMC_HOLE_START.:wq

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix CPDMA hang in PRT mode

Fix CPDMA hang in PRT mode, set CPF_INT_DMA in reg CP_MECx_F32_INT_DIS for Compute and set DISABLE_GFX_HALT_ON_UTCL1_ERROR in reg CP_DEBUG for GFX

Affected ASICs: Vega10 Vega12 Raven

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun.Li <yukun1.li@amd.com>
Tested-by: Maciej.Jesionowski <maciej.jesionowski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add CP_DEBUG register definition for GC9.0

Add CP_DEBUG register definition.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: RV2 DP MST 2nd display within daisy chain not light up

RV2 resource is limit to 3 pipes. Limitation should apply to all HW
blocks instead of front pipe.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix warning storm on Raven2

[Why]
Wrong index for pstate debug test register

[How]
Add correct index value for dcn1_01 in hubbub1_construct()

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-msm-fixes-2018-10-09' of git://people.freedesktop.org/~robclark/linux into drm-next

Fix 32-bit arm build.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt7s20e4aJmnOFM-uZHfYSsicy0E=ssse1D7LTXX4jnWQ@mail.gmail.com

Merge tag 'drm-msm-next-2018-10-07' of git://people.freedesktop.org/~robclark/linux into drm-next

This time mostly further refinement of dpu1+a6xx for sdm845 and
beyond.. and hurray for more negative diffstat :-)

- Misc cleanups and fixes
- GPU preemption optimization
- a6xx perf improvements and clock fixes (ie. lets actually not run at
  minimum clks)
- a6xx devfreq/DCVS
- Lots of code cleanup across dpu (Bruce, Jeykumar, Sean)
- Fixed a few crashes on startup relating to dsi (Sean)
- Add cursor support (Sravanthi, Sean)
- Properly free mdss irq on destroy (Jordan)
- Use correct encoder_type when initializing, fixes crash on boot (Stephen)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsNevCzMiLuNW1EVN6gtP3JZSir6PfnWvnCavSZM+bUFQ@mail.gmail.com

drm/amdgpu: Change VI gfx/sdma/smu init sequence

initialize gfx/sdma before dpm features enabled.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add fw load in gfx_v8 and sdma_v3

gfx and sdma can be initialized before smu.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Implement load_firmware interface

with this interface, gfx/sdma can be initialized
before smu.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Allocate ucode bo in request_smu_load_fw

ucode bo is needed by request_smu_load_fw,
the request_smu_load_fw maybe called by gfx/sdma
before smu hw init.
so move amdgpu_ucode_bo_init to request_smu_lowd_fw
from smu hw init.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Don't reallocate ucode bo when suspend

driver don't release the ucode memory when suspend. so don't
need to allocate bo when resume back.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove FW_LOAD_DIRECT type support on VI

AMDGPU_FW_LOAD_DIRECT is used for bring up.
Now it don't work any more. so remove the support.

v2: Add warning message if user select
   AMDGPU_FW_LOAD_DIRECT/AMDGPU_FW_LOAD_PSP on VI.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Correct VCN cache window definition

Correct VCN cache window definition. The old one
is reused from UVD, and it is not fully correct.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Replace value with defined macro

Replace value with defined macro to make
code more readable

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:fix dpg pause mode hang issue

Use mmUVD_SCRATCH2 tracking decode write point.
It will help avoid dpg pause mode hang issue.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Remove unused code

The following WREG32_SOC15_DPG_MODE will overwrite register
mmUVD_CGC_CTRL. This code can be removed.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: ratelimit bo warnings

So a few days ago I started getting sprays of these warnings --
sorry, but because it was a few days ago I'm not sure what I was
running at the time (but it was probably either Stellaris or Chromium).

Sep 25 22:06:34 mutilate err: : [  544.718905] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.718909] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.719710] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.719714] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.719862] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.719865] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.720772] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.720778] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate warning: : [  544.721415] radeon 0000:01:00.0: vbo resource seems too big for the bo

followed by a massive stream of "vbo resource seems too big for the bo".

The most extreme flood ran from 23:01:58 to 23:02:47 and emitted 91,000
lines of log in that time.  This... seems excessive, given that each log
message after the first contains more or less no information.

So ratelimit these messages. (We probably want to see at least *some* so
that the underlying bug can be fixed -- always assuming the bug isn't in
unfixable closed-source game code somewhere.)

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix incorrect use of amdgpu_irq_add_id in si_dma.c

Adding a second irq source because of a different src_id is actually a
bug.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix AGP location with VRAM at 0x0

That also simplifies handling quite a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove the intterupt handling for the KIQ events

[Why]
1. we never submit IBs to the KIQ
2. there seems to be ~500ms delay during amdgpu resume spent in KIQ,
   hence pointing toward interrupts are not working correctly.

[How]
remove interrupt handling for KIQ.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>i
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix incorrect use of process->mm

This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip IB tests for KIQ in general

[Why]
1. We never submit IBs to KIQ.
2. Ring test pass without KIQ's ring also.
3. By skipping we see an improvement of around 500ms
   in the amdgpu's resume time.

[How]
skip IB tests for KIQ ring type.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: Simplify spsc_queue_count check in drm_sched_entity_select_rq

Clang generates a warning when it sees a logical not followed by a
conditional operator like ==, >, or <.

drivers/gpu/drm/scheduler/sched_entity.c:470:6: warning: logical not is
only applied to the left hand side of this comparison
[-Wlogical-not-parentheses]
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^                                     ~~
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
after the '!' to evaluate the comparison first
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^
             (                                        )
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
around left hand side expression to silence this warning
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^
            (                                    )
1 warning generated.

It assumes the author might have made a mistake in their logic:

if (!a == b) -> if (!(a == b))

Sometimes that is the case; other times, it's just a super convoluted
way of saying 'if (a)' when b = 0:

if (!1 == 0) -> if (0 == 0) -> if (true)

Alternatively:

if (!1 == 0) -> if (!!1) -> if (1)

Simplify this comparison so that Clang doesn't complain.

Fixes: 35e160e781a0 ("drm/scheduler: change entities rq even earlier")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Refine smu7/8 request_smu_load_fw callback function

The request_smu_load_fw of VI is used to load gfx/sdma
ip's firmware.

Check whether the gfx/sdma firmware have been loaded successfully
in this callback function.
if failed, driver can exit to avoid gpu hard hung.
if successful, clean the flag reload_fw to avoid duplicated fw load.
when suspend/resume, driver need to reload fw.
so in suspend, reset the reload_fw flag to true to enable load fw when
resume.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Setup SoftRegsStart before request smu load fw

need to know SoftRegsStart value to visit the register
UcodeLoadStatus to check fw loading state.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Refine function iceland_start_smu

if upload firmware failed, no matter how many times
the function runs again, the same error will be encountered.
so remove the duplicated code.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move gfx flag in_suspend to adev

Move in_suspend flag to adev from gfx, so
can be used in other ip blocks, also keep
consistent with gpu_in_reset flag.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Fix memory leak on CI/AI

On CI/AI, fw was not loaded by smu, but
smu's fw still need to be released
when driver fini.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Drop dead define in amdgpu.h

the struct was not in use any more.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Always enable fan sensors for read

don't need to set fan1_enable to read fan sensors.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Disable sysfs pwm1 if not in manual fan control

Following lm-sensors 3.0.0,
Only enable pwm1 sysfs when fan control mode(pwm1_enable)
in manual

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add fan RPM setting via sysfs

Add fan1_target for get/set fan speed in RPM unit
Add fan1_min/fan1_max for get min, max fan speed in RPM unit
Add fan1_enable to enable/disable the fan1 sensor

v3: drop the hardcode value of min/max rpm in comments pointed
    out by Alex.
v2: query the min/max rpm gpu support instand of hardcode value.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Implement AMDGPU_PP_SENSOR_MIN/MAX_FAN_RPM

so user can query the RPM range

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add new AMDGPU_PP_SENSOR_MIN/MAX_FAN_RPM sensor

For getting the min/max fan speed in RPM units.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refine uvd_v6/7_0_enc_get_destroy_msg

1. make uvd_v7_0_enc_get_destroy_msg static
2. drop a function variable that always true

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Signal hw_done() after waiting for flip_done()

In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().

[Why]

This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.

Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):

**THREAD 1**                        | **THREAD 2**
                                    |
Initialize atomic state for flip    |
                                    |
Queue worker                        |
                                   ...

                                    | Do work for flip
                                    |
                                    | Signal hw_done() on CRTC 1
                                    | Signal hw_done() on CRTC 2
                                    |
                                    | Wait for flip_done() on CRTC 1

                                <---- **PREEMPTED BY THREAD 1**

Initialize atomic state for cursor  |
update (1)                          |
                                    |
Do cursor update work on both CRTCs |
                                    |
Clear atomic state (2)              |
**DONE**                            |
                                   ...
                                    |
                                    | Wait for flip_done() on CRTC 2
                                    | *ERROR*
                                    |

The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)

Some things to note:

* Due to the mirrored configuration, the cursor updates on both CRTCs.

* At this point, the pflip IRQ has already been handled, and flip_done
  signaled on all CRTCs. The cursor commit can therefore continue.

* The old_crtc_states used by the cursor update are the **same states**
  as the new_crtc_states used by the flip worker.

At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.

(*) Technically, 'state->crtcs[i].state' is freed, which was made to
    reference old_crtc_state in drm_atomic_helper_swap_state()

[How]

By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.

Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use proper enums in process_channel_reply

Clang warns when one enumerated type is implicitly converted to another.

drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:315:19: warning:
implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
                reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
                              ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/i2caux/dce110/aux_engine_dce110.c:349:19:
warning: implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
                reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
                              ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The current enum is incorrect, it should be from aux_transaction_reply,
so use AUX_TRANSACTION_REPLY_HPD_DISCON.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Raise dispclk value for dce_update_clocks

[Why]

The DISPCLK value was previously requested to be 15% higher for all
ASICS that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and dce110 set_bandwidth this was removed
for power saving considerations.

This changed caused corruption under certain display configurations.
Originally thought to be Vega specific, it was also observed on Polaris.

[How]

The 15% is brought back but its placement differs from the original
patch. This boost should only be enable while DFS bypass is inactive.

This (like the Vega patch) is also a workaround that should be
removed after the root cause is identified.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: HLK Periodic Frame Notification test failed

[Why]
Due to a small pre-fetch window, the active vline timing is a couple
of lines off when compared to what it should be.

[How]
Changed the calculation for the start vline to account for this window.

Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix Interlace video timing.

[Description] interlace mode shows wrong vertical timing.
Interface timing in Edid is half vertical timing as progressive timing.
driver doubled the vertical timing in edid_paser,
no need to double in optc again.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Flatten irq handler data struct

[Why]
There is no reason why the common data needs to be kept separate.

[How]
Flatten the struct by moving common data into the DM IRQ struct.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix memory leak in resource pools

[why]
ddc engines were recently changed to be independently tracked
from pipe count.  the change was reflected in resource constructor
but not in destructor.  this manifests as a memory leak when
pipe harvesting is enabled, since not all constructed ddc engines
are freed

[how]
make destructor symmetric with constructor for all dcX_resource

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc 3.1.68

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: WA for DF keeps awake after S0i3.

[Why]
DF keeps awake after S0i3 resume due to DRAM_STATE_CNTL
is set by bios command table during dcn init_hw.

[How]
As a work around, check STATE_CNTL status before init_hw,
if it is 0 before init_hw and set to 1 after init_hw,
change it to 0.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up encoding checks

[Why]
All ASICS we support has YCbCr support, so
the check is unnecessary, the currently logic
in validate output also returns true all
the time, so the unneccessary logic is removed

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: block DP YCbCr420 modes

[why]
Currently not supported, will black screen when set.

[How]
Fail validate timing helper for those modes.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function to fetch clock requirements

Also add dram clock to clocks struct, for systems that uses them.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Calculate swizzle mode using bpp during validation

[Why]
Previously bandwidth validation was failing because swizzle mode was not
initialized during plane_state allocation. The swizzle mode was
calculated using pixed format which is how swizzle mode is initially
calculated in addrlib.

[How]
* Set default swizzle mode for validation to DC_SW_UNKNOWN
* Created new function in dcn10_assign_swizzle_mode which sets the
  plane swizzle mode based on selected pixed format
* Added the call of assign_swizzle_mode into dc_validate_global_state
* Set failsafe swizzle mode back to DC_SW_LINEAR

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a check-function for virtual signal type

[why]
Same functions exist for all other signal types.

[how]
Add a function that checks against virtual signal type.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix 4K stereo screen flash issue

[Why]
HDMI_scramber is not enabled for pixel rate >340Mhz.
[How]
Calculate the phy clock to include the Hw frame packing factor.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DC build_id to determine build type

[why]
Sometimes there are indications that the incorrect driver is being
loaded in automated tests. This change adds the ability for builds to
be tagged with a string, and picked up by the test infrastructure.

[how]
dc.c will allocate const for build id, which is init-ed with default
value, indicating production build. For test builds, build server will
find/replace this value. The test machine will then verify this value.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD

We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
Multiple runs of power measurement shows no imapct.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pp: Remove wrong code in fiji_start_smu

HW CG feature will be enabled after hw ip initialized

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Remove uncessary extra vcn pg cntl in smu

the vcn power will be controlled by VCN.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move out power up/down sdma out of smu

smu only expose interface to other ip blocks.
in order to reduce dependence between smu and other ip blocks

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Expose the smu support for SDMA PG cntl

SDMA IP can be power up/down via smu message

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpm

The minRPM speed maybe equal to zero. so need to check
input RPM not equal to 0, otherwise cause divide-by-zero driver crash.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Fix fan's RPM setting not work on VI/Vega10

set the target rpm value to wrong register.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>