Jo-Philipp Wich [Mon, 27 Oct 2014 11:07:38 +0000 (11:07 +0000)]
px5g-standalone: use /dev/urandom to initialize serial (#18232)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43080
Felix Fietkau [Mon, 27 Oct 2014 11:02:23 +0000 (11:02 +0000)]
mac80211: fix key flush handling in AP+STA
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43079
Jo-Philipp Wich [Mon, 27 Oct 2014 10:25:07 +0000 (10:25 +0000)]
uhttpd: fix HTTP incompatibilities in file handler
* Fixes sending an extraneous message body for 204 and 304 resoponses which
breaks Chrome in keep-alive mode.
* Adds mimetypes for JSON and JSONP.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43078
John Crispin [Sun, 26 Oct 2014 18:15:25 +0000 (18:15 +0000)]
e2fsprogs: fix description, tune2fs is not part of the e2fsprogs package
https://dev.openwrt.org/ticket/18209
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43076
John Crispin [Sun, 26 Oct 2014 17:58:53 +0000 (17:58 +0000)]
mpc85xx: fix WAN/LAN-MAC for TP-LINK TL-WDR4900 v1
This works around a bootloader issue where every device
has the same lan/wan-mac 00:04:9f:ef:01:01 - with this patch
we read the macs from config-partition during initial network
setup. We have 9 valid macs stored in the partition, the
1st two are used for the radios, 3 and 4 are now used for WAN/LAN.
on an already setup / running device we can get the real macs with
. /lib/functions.sh
. /lib/functions/system.sh
echo "LAN = $(mtd_get_mac_binary config 338)"
echo "WAN = $(mtd_get_mac_binary config 344)"
see:
https://dev.openwrt.org/ticket/14714
from the ticket / user klondike:
U-Boot passed this commit https://gitorious.org/0xlab-kernel/u-boot/commit/
ecd1a09b81f2ed6e6ba7bd1d0bfb0cc3d0ea2ad0
http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-mpc83xx-remove-hardcoded-network-addresses-from-config-files-td44372.html
I suppose to prevent this particular issue, but the WDR4900 may be using an old bootloader still affected.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I have been checking the contents of the dtb on the flash, this particular bit is quite revealing:
ethernet@b0000 {
#address-cells = <0x1>;
#size-cells = <0x1>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [00 00 00 00 00 00];
^^^^^^^^^^^^^^^^^
interrupt-parent = <0x2>;
phy-handle = <0x3>;
phy-connection-type = "rgmii-id";
ptimer-handle = <0x4>;
queue-group@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0xb0000 0x1000>;
rx-bit-map = <0xff>;
tx-bit-map = <0xff>;
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
};
};
I also have been checking the live device map to find this:
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@
ffe00000/ethernet@b0000/local-mac-address
00000000 00 04 9f ef 01 01 |......|
00000006
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@
ffe00000/ethernet@b1000/local-mac-address
*
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@
ffe00000/ethernet@b2000/local-mac-address
*
My conclussion is that U-Boot most likely finds the device and (as no valid MAC-address is provided)
falls back to the default MAC provided by the old code, the kernel then receives thee modified
device map from U-Boot and assumes this is the correct MAC for the device despite it obviously isn't.
This can be seen at
target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch
The enetaddr is filled up by using the device tree data by the process_boot_dtb
function and used by the platform_fixups function to set the eth0 address
(by calling dt_fixup_mac_address_by_alias("ethernet0", enetaddr); ).
But instead we should be used the device address which to my understanding is
provided in the mtd.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43074
John Crispin [Sun, 26 Oct 2014 17:18:45 +0000 (17:18 +0000)]
ramips: fix filenames in PorayDualSize factory images
SVN-Revision: 43073
John Crispin [Sun, 26 Oct 2014 17:18:41 +0000 (17:18 +0000)]
vgv7519: support more recent board release with vrx288 v1.2
The existance of this new board has been confirmed and tested by the guy on this commit
https://github.com/openwrt-vgv7519/uboot-bin/commit/
76fdd8e638f81e324ffe77856481bd147398f6e8
SVN-Revision: 43072
John Crispin [Sun, 26 Oct 2014 16:57:38 +0000 (16:57 +0000)]
comgt: fix typo in the ncm proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43071
John Crispin [Sun, 26 Oct 2014 16:57:33 +0000 (16:57 +0000)]
generate list of license information for packages
Many packages define already metadata about their license (PKG_LICENSE),
but this is only included in the ipk files.
This change allows to create the information also on the build-host,
to get an overview on the used licenses.
In the full list, also all packages without this info are shown
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
SVN-Revision: 43070
John Crispin [Sun, 26 Oct 2014 16:57:27 +0000 (16:57 +0000)]
util-linux-dmesg: Add missing install section
Package util-linux-dmesg is broken (at least) in Barrier Breaker git repo
as you can select it within menuconfig, it will compile (as a part of
util-linux) but it will not install as install section is missing from
package Makefile.
Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com>
SVN-Revision: 43069
Felix Fietkau [Sun, 26 Oct 2014 16:18:24 +0000 (16:18 +0000)]
Revert "include/shell.sh: remove getvar()"
It is more widely used than I thought.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43068
Felix Fietkau [Sun, 26 Oct 2014 11:26:54 +0000 (11:26 +0000)]
findutils: add dependency on bison
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43064
Jo-Philipp Wich [Sat, 25 Oct 2014 18:43:18 +0000 (18:43 +0000)]
broadcom-wl: align with mac80211 config
- Support HT40 instead of HT40+/HT40- like mac80211
- Enable 11n if htmode is HT20 or HT40
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43063
Felix Fietkau [Sat, 25 Oct 2014 17:22:46 +0000 (17:22 +0000)]
base-files: add /etc/shadow to list of essential files to keep in sysupgrade (bug 18206)
Based on bug #18206 sysupgrade can lead to loss of password information in
certain situations. Most likely all users who will upgrade from versions
r43017-43040, will lose their current passwords. :-(
https://dev.openwrt.org/ticket/18206
Currently /etc/shadow is defined as a conffile in base-files:
https://dev.openwrt.org/browser/trunk/package/base-files/Makefile#L37
But it is not defined in the default list of essential files to keep in
sysupgrade:
https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/keep.d/base-files-essential
If exporting conffiles info fails, /etc/shadow can get lost.
Shadow passwords are now the default, so saying that preserving /etc/passwd
is essential while /etc/shadow is not, makes no sense.
The attached patch adds /etc/shadow to the list of essential files.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 43061
Felix Fietkau [Sat, 25 Oct 2014 16:57:16 +0000 (16:57 +0000)]
tools: Fix compilation on x32 host
Compiling the host tools on the new x32 architecture (which is
an ILP32 ELF32 system on an amd64 CPU) fails for various reasons.
gmp: pull same fix I applied to OpenADK, which was inspired
by the fix in the Debian source package
mtd-utils: write a workaround myself; only affects x32, but
the use of llseek is dangerous according to the manpage, so
the guard ifdef should probably go away
findutils: pull fix straight from the Debian source packae
Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
SVN-Revision: 43060
Felix Fietkau [Sat, 25 Oct 2014 16:48:45 +0000 (16:48 +0000)]
hostapd: update to 2014-10-25
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43059
Felix Fietkau [Sat, 25 Oct 2014 14:45:22 +0000 (14:45 +0000)]
ath9k: add a few calibration related fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43058
Steven Barth [Sat, 25 Oct 2014 10:39:02 +0000 (10:39 +0000)]
odhcp6c: avoid some unnecessary big mallocs
SVN-Revision: 43056
Felix Fietkau [Fri, 24 Oct 2014 22:00:34 +0000 (22:00 +0000)]
rtlwifi: unbreak usb drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43052
Felix Fietkau [Fri, 24 Oct 2014 20:39:42 +0000 (20:39 +0000)]
ar71xx: refresh 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43051
Felix Fietkau [Fri, 24 Oct 2014 20:39:36 +0000 (20:39 +0000)]
kernel: refresh generic 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43050
Felix Fietkau [Fri, 24 Oct 2014 20:39:26 +0000 (20:39 +0000)]
kernel: update 3.10.49 to 3.10.58 (released 2014-oct-15)
All platforms which are using 3.10.x at the moment are upgraded.
Changelogs:
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.50
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.51
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.52
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.53
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.54
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.55
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.56
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.57
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.58
A new symbol 'X86_16BIT' appeared in 3.10.52 with commit
34273f41d57ee8d854dcd2a1d754cbb546cb548f
("x86-espfix-make-it-possible-to-disable-16-bit-support.patch")
I defaults to 'unset', but it's worth a discussion to enable it
("turn off support for any 16-bit software").
Also removed the patch
0db3db45f5bd6df4bdc03bbd5dec672e16164c4e
("fix build failure on memcpy() in decompress.c")
and is obsolete by commit
29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.
included in kernel 3.10.56
compile tested on all platforms with:
make tools/install
make toolchain/install
make target/linux/compile
user@box:~/user/openwrt$ cat /tmp/log.txt
[Wed Oct 22 00:36:02 CEST 2014] ./smoketest.sh: ar71xx - OK
[Wed Oct 22 00:53:22 CEST 2014] ./smoketest.sh: ar7 - OK
[Wed Oct 22 01:08:27 CEST 2014] ./smoketest.sh: au1000 - OK
[Wed Oct 22 01:21:43 CEST 2014] ./smoketest.sh: avr32 - OK
[Wed Oct 22 01:37:47 CEST 2014] ./smoketest.sh: cns21xx - OK
[Wed Oct 22 01:52:05 CEST 2014] ./smoketest.sh: cns3xxx - OK
[Wed Oct 22 02:10:23 CEST 2014] ./smoketest.sh: gemini - OK
[Wed Oct 22 02:29:07 CEST 2014] ./smoketest.sh: ixp4xx - OK
[Wed Oct 22 02:44:01 CEST 2014] ./smoketest.sh: malta - OK
[Wed Oct 22 02:55:57 CEST 2014] ./smoketest.sh: mpc85xx - OK
[Wed Oct 22 03:07:56 CEST 2014] ./smoketest.sh: orion - OK
[Wed Oct 22 03:24:30 CEST 2014] ./smoketest.sh: ppc40x - OK
[Wed Oct 22 03:40:19 CEST 2014] ./smoketest.sh: ppc44x - OK
[Wed Oct 22 03:55:29 CEST 2014] ./smoketest.sh: realview - OK
[Wed Oct 22 04:09:47 CEST 2014] ./smoketest.sh: sparc - OK
[Wed Oct 22 04:23:37 CEST 2014] ./smoketest.sh: x86 - OK
[Wed Oct 22 04:35:56 CEST 2014] ./smoketest.sh: xburst - OK
run tested on x86, au1000, ar71xx, mpc85xx and brcm47xx
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43049
Felix Fietkau [Fri, 24 Oct 2014 19:35:52 +0000 (19:35 +0000)]
netlogic: use KERNEL_PATCHVER
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43048
Felix Fietkau [Fri, 24 Oct 2014 19:34:02 +0000 (19:34 +0000)]
kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43047
Felix Fietkau [Fri, 24 Oct 2014 18:05:51 +0000 (18:05 +0000)]
broadcom_wl: eliminate compiler error with gcc-4.9-linaro
Attempting to build broadcom_wl (from trunk) with the linaro 4.9.x
toolchain produces the following errors:
<...>/wl_linux.c: In function 'wl_dump_ver':
<...>/wl_linux.c:2302:3: error: macro "__DATE__" might prevent reproducible builds [-Werror=date-time]
__DATE__, __TIME__, EPI_VERSION_STR);
^
<...>/wl_linux.c:2302:13: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
__DATE__, __TIME__, EPI_VERSION_STR);
^
cc1: some warnings being treated as errors
Remove the use of the __DATE__ and __TIME__ macros, as the info is not
really useful.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 43046
Felix Fietkau [Fri, 24 Oct 2014 13:23:39 +0000 (13:23 +0000)]
openssl: fix target definition for x86_64 (#18182)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43045
Felix Fietkau [Fri, 24 Oct 2014 13:04:12 +0000 (13:04 +0000)]
netifd: update to the latest version, fixes a use-after-free bug
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43044
Felix Fietkau [Fri, 24 Oct 2014 13:04:08 +0000 (13:04 +0000)]
kernel: allow targets to specify KERNEL_PATCHVER instead of LINUX_VERSION
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43043
Nicolas Thill [Fri, 24 Oct 2014 11:19:29 +0000 (11:19 +0000)]
gdb: fix build failure on arm
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43042
Jo-Philipp Wich [Fri, 24 Oct 2014 09:24:51 +0000 (09:24 +0000)]
include: unbreak conffiles, postinst & prerm exports
Changeset r43017 reworked the ipkg control metadata generation but broke
the export of conffiles, postinst and prerm defines.
Change the code back to rely on shvar and shexport, this is required to
properly output multiline contents.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43041
Jo-Philipp Wich [Fri, 24 Oct 2014 09:24:45 +0000 (09:24 +0000)]
linux: add kmod-i2c-piix4
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43040
Florian Fainelli [Fri, 24 Oct 2014 00:16:48 +0000 (00:16 +0000)]
netlogic: fix modular USB build
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43039
Florian Fainelli [Fri, 24 Oct 2014 00:16:37 +0000 (00:16 +0000)]
netlogic: add basic user-space support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43038
Florian Fainelli [Fri, 24 Oct 2014 00:16:23 +0000 (00:16 +0000)]
netlogic: add XLR/XLP support
Add support for Broadcom/Netlogic XLR/XLP support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43037
Florian Fainelli [Fri, 24 Oct 2014 00:16:10 +0000 (00:16 +0000)]
kernel: add a memmove() implementation for MIPS boot decompressor
This is required due to 306-mips_mem_functions_performance.patch, just
add a memmove() implementation to satisfy the lzma2 decompressor code.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43036
Florian Fainelli [Fri, 24 Oct 2014 00:15:58 +0000 (00:15 +0000)]
toolchain: fix mips64 musl linker names
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43035
Felix Fietkau [Thu, 23 Oct 2014 13:33:18 +0000 (13:33 +0000)]
ath: process regulatory notifiers with CONFIG_ATH_USER_REGD set
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43034
Felix Fietkau [Thu, 23 Oct 2014 13:33:14 +0000 (13:33 +0000)]
ath10k: fix survey output channel in-use flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43033
Felix Fietkau [Wed, 22 Oct 2014 16:26:56 +0000 (16:26 +0000)]
ath9k: fix tx power reporting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43032
Rafał Miłecki [Wed, 22 Oct 2014 14:34:43 +0000 (14:34 +0000)]
bcm53xx: backport forgotten spi-nor change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43031
Rafał Miłecki [Wed, 22 Oct 2014 14:16:18 +0000 (14:16 +0000)]
bcm53xx: backport spi-nor patches from 3.18-rc1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43030
Felix Fietkau [Wed, 22 Oct 2014 13:32:12 +0000 (13:32 +0000)]
ath9k: merge ar9580/ar955x initval updates
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43029
Felix Fietkau [Wed, 22 Oct 2014 13:32:06 +0000 (13:32 +0000)]
ath9k: merge a regulatory handling fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43028
Jo-Philipp Wich [Wed, 22 Oct 2014 11:30:07 +0000 (11:30 +0000)]
linux: add kmod-hwmon-k10temp
This module is required to read the CPU core temperature sensors
on the Alix APU board.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43027
Felix Fietkau [Wed, 22 Oct 2014 11:02:18 +0000 (11:02 +0000)]
ar71xx: add support for buffalo WZR-450HP2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43026
Felix Fietkau [Wed, 22 Oct 2014 10:47:26 +0000 (10:47 +0000)]
Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"
This seems to cause issues on some build hosts, and it is not that
important.
SVN-Revision: 43025
Felix Fietkau [Wed, 22 Oct 2014 08:57:56 +0000 (08:57 +0000)]
kernel: use .ONESHELL to speed up processing of many kmod-* packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43024
Felix Fietkau [Wed, 22 Oct 2014 08:57:50 +0000 (08:57 +0000)]
build: only print skipped packages that were selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43023
Felix Fietkau [Wed, 22 Oct 2014 08:57:45 +0000 (08:57 +0000)]
kernel: use /bin/sh instead of bash to speed up processing of many kmod-* packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43022
Felix Fietkau [Wed, 22 Oct 2014 08:57:40 +0000 (08:57 +0000)]
build: use ONESHELL to speed up scanning and the toplevel makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43021
Felix Fietkau [Wed, 22 Oct 2014 08:57:30 +0000 (08:57 +0000)]
include/shell.sh: remove getvar()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43020
Felix Fietkau [Wed, 22 Oct 2014 08:57:25 +0000 (08:57 +0000)]
build: optimize target metadata dump
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43019
Felix Fietkau [Wed, 22 Oct 2014 08:57:20 +0000 (08:57 +0000)]
rules.mk: reduce shexport to one line to allow it to be put in a target context
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43018
Felix Fietkau [Wed, 22 Oct 2014 08:57:16 +0000 (08:57 +0000)]
build: clean up and optimize ipkg control generator code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43017
Felix Fietkau [Wed, 22 Oct 2014 08:57:11 +0000 (08:57 +0000)]
build: do not process built-in rules for make subdirs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43016
Felix Fietkau [Wed, 22 Oct 2014 08:57:07 +0000 (08:57 +0000)]
build: optimize printing of disabled packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43015
Felix Fietkau [Tue, 21 Oct 2014 20:32:05 +0000 (20:32 +0000)]
comgt: drop the use of the non-standard XCASE termios flag (#18186)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43014
Steven Barth [Tue, 21 Oct 2014 20:00:56 +0000 (20:00 +0000)]
nftables: bump to latest, fix minigmp
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43013
Steven Barth [Tue, 21 Oct 2014 20:00:46 +0000 (20:00 +0000)]
libnftnl: bump to latest
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43012
Felix Fietkau [Tue, 21 Oct 2014 16:30:01 +0000 (16:30 +0000)]
ath9k: merge a fix for queue start/stop handling (fixes #18164, #18130)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43011
Rafał Miłecki [Tue, 21 Oct 2014 14:37:44 +0000 (14:37 +0000)]
bcm53xx: add support for Asus RT-N18U LEDs & buttons
Got GPIOs from #18152 thanks to Grrruk
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43010
Felix Fietkau [Tue, 21 Oct 2014 11:03:20 +0000 (11:03 +0000)]
musl: fix getopt optional argument processing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43009
Rafał Miłecki [Mon, 20 Oct 2014 22:09:40 +0000 (22:09 +0000)]
bcm53xx: switch RT-N18U firmware to the UBI
According to the ticket #18152 it also uses NAND with 0x20000 erase size
and 0x800 page size.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43008
Felix Fietkau [Mon, 20 Oct 2014 20:09:35 +0000 (20:09 +0000)]
netifd: update to the latest version, fixes link status handling on VLAN devices (#18106)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43007
Felix Fietkau [Mon, 20 Oct 2014 15:07:19 +0000 (15:07 +0000)]
base-files: fix telnet login on musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43006
Felix Fietkau [Mon, 20 Oct 2014 13:55:11 +0000 (13:55 +0000)]
rpcd: add 802.11ac for iwinfo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43005
Felix Fietkau [Mon, 20 Oct 2014 11:43:08 +0000 (11:43 +0000)]
binutils: remove linaro version string, it confuses gcc lto support detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43004
Felix Fietkau [Mon, 20 Oct 2014 11:42:59 +0000 (11:42 +0000)]
gcc: update 4.9 to linaro 2014.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43003
John Crispin [Mon, 20 Oct 2014 11:19:53 +0000 (11:19 +0000)]
openssl: host build fails when ccache is enabled
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43002
John Crispin [Mon, 20 Oct 2014 11:19:21 +0000 (11:19 +0000)]
hostapd: Add wpa_psk_file option to netifd.sh
The wpa_psk_file option offers the possibility to use a different WPA-PSK key for each client. The directive points to a file with the following syntax:
mac_address wpa_passphrase_or_hex_key
Example:
00:11:22:33:44:55 passphrase_for_client_1
00:11:22:33:44:67 passphrase_for_client_2
00:11:22:33:44:89
0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
So it is possible to specify both ASCII passphrases and raw 64-chars hex keys.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43001
Imre Kaloz [Mon, 20 Oct 2014 10:00:02 +0000 (10:00 +0000)]
fix compile against musl
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43000
Felix Fietkau [Mon, 20 Oct 2014 09:23:55 +0000 (09:23 +0000)]
prereq-build: rename the openssl check to libssl, add back the old check - it is required after all
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42999
Felix Fietkau [Mon, 20 Oct 2014 09:18:36 +0000 (09:18 +0000)]
firmware-utils: rename encrypt()/decrypt() in mkhilinkfw to avoid collisions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42998
Felix Fietkau [Mon, 20 Oct 2014 09:18:21 +0000 (09:18 +0000)]
Revert "openssl: add host build."
This reverts commit r42988
SVN-Revision: 42997
Felix Fietkau [Mon, 20 Oct 2014 09:18:02 +0000 (09:18 +0000)]
tools: revert faulty dependency on package stuff
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42996
Felix Fietkau [Mon, 20 Oct 2014 09:17:56 +0000 (09:17 +0000)]
prereq-build: replace the openssl command check with a check for headers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42995
John Crispin [Mon, 20 Oct 2014 06:48:51 +0000 (06:48 +0000)]
ramips: revert
1d5afc012e9d3eef0b113e1a89cff7508b731f90
the submitted patch was bogus
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42994
John Crispin [Mon, 20 Oct 2014 06:29:58 +0000 (06:29 +0000)]
ar71xx: unify usage of IMAGE_PROFILE instead of PROFILE.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42992
John Crispin [Mon, 20 Oct 2014 06:29:51 +0000 (06:29 +0000)]
ramips: add comments for image/Makefile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42991
John Crispin [Mon, 20 Oct 2014 06:29:44 +0000 (06:29 +0000)]
ar71xx: add comments for Image/BuildLoader{, Alone}.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42990
John Crispin [Mon, 20 Oct 2014 06:29:38 +0000 (06:29 +0000)]
firmware-utils: restore compilation of mkhilinkfw.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42989
John Crispin [Mon, 20 Oct 2014 06:29:27 +0000 (06:29 +0000)]
openssl: add host build.
Only support Linux at the moment.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42988
John Crispin [Mon, 20 Oct 2014 06:29:21 +0000 (06:29 +0000)]
build: add $(STAGING_DIR_HOST)/usr/{include, lib} to build search path.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42987
John Crispin [Mon, 20 Oct 2014 06:29:13 +0000 (06:29 +0000)]
firmware-utils: fix compilation warnings.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42986
John Crispin [Mon, 20 Oct 2014 06:29:05 +0000 (06:29 +0000)]
failsafe-mode: print short help on commandline
[base-files] failsafe-mode: print short help on commandline
Like mentioned in ticket https://dev.openwrt.org/ticket/11911
this should make the IRC much quieter. Failsafe is somehow
special and even experienced users are helpless, because they
are not used to this seldom situation. Also: likely you have
no internet access in this mode, so you cannot use the wiki.
a failsafe-session now looks like this:
first we see from 'package/base-files/files/bin/login.sh' the hint:
=== IMPORTANT ============================
Use 'passwd' to set your login password
this will disable telnet and enable SSH
------------------------------------------
after this the /etc/banner ("OpenWrt - wireless freedom")
and then the new text:
================= FAILSAFE MODE active ================
special commands:
* firstboot reset settings to factory defaults
* mount_root mount root-partition with config files
after mount_root:
* passwd change root's password
* /etc/config directory with config files
for more help see:
http://wiki.openwrt.org/doc/howto/generic.failsafe
=======================================================
this supersedes the old patches:
http://patchwork.openwrt.org/patch/3337/
http://patchwork.openwrt.org/patch/3553/
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 42985
John Crispin [Mon, 20 Oct 2014 06:28:57 +0000 (06:28 +0000)]
kernel: add another missing symbol for 3.14
SENSORS_VEXPRESS is masked by HWMON
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 42984
John Crispin [Mon, 20 Oct 2014 06:28:48 +0000 (06:28 +0000)]
ramips: add support for Nexx WT3020 devices
SVN-Revision: 42983
John Crispin [Mon, 20 Oct 2014 06:28:39 +0000 (06:28 +0000)]
ramips: sort boards in upgrade/platform.sh alphabetically
SVN-Revision: 42982
Felix Fietkau [Sun, 19 Oct 2014 23:04:17 +0000 (23:04 +0000)]
iproute2: fix musl build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42981
Felix Fietkau [Sun, 19 Oct 2014 23:04:02 +0000 (23:04 +0000)]
authsae: fix musl build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42980
Felix Fietkau [Sun, 19 Oct 2014 22:49:42 +0000 (22:49 +0000)]
gdb: update to version 7.8, fix musl build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42979
Felix Fietkau [Sun, 19 Oct 2014 22:35:27 +0000 (22:35 +0000)]
valgrind: update to the latest version, fix musl support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42978
Felix Fietkau [Sun, 19 Oct 2014 21:57:28 +0000 (21:57 +0000)]
toolchain: mark musl as non-broken
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42977
Felix Fietkau [Sun, 19 Oct 2014 21:46:08 +0000 (21:46 +0000)]
base-files: fix ldd definition if /usr/bin/ldd exists
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42976
Felix Fietkau [Sun, 19 Oct 2014 21:46:03 +0000 (21:46 +0000)]
toolchain: drop the mips softfloat symlink hack
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42975
Felix Fietkau [Sun, 19 Oct 2014 21:45:58 +0000 (21:45 +0000)]
toolchain: when using musl, install a symlink from ld-musl-*.so to /usr/bin/ldd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42974
Felix Fietkau [Sun, 19 Oct 2014 21:45:51 +0000 (21:45 +0000)]
gcc: do not assume that the Mac OS X filesystem is case insensitive
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42973
Felix Fietkau [Sun, 19 Oct 2014 21:45:45 +0000 (21:45 +0000)]
mountd: explicitly link libubox (needed by libuci)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42972
Felix Fietkau [Sun, 19 Oct 2014 21:45:41 +0000 (21:45 +0000)]
musl: update to version 1.1.5
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42971
Felix Fietkau [Sun, 19 Oct 2014 21:45:36 +0000 (21:45 +0000)]
gcc: update, split and rework 4.9 musl patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42970
projects / openwrt / staging / ldir.git / log