Qu Wenruo [Fri, 21 Sep 2018 07:20:29 +0000 (15:20 +0800)]
btrfs: relocation: Cleanup while loop using rbtree_postorder_for_each_entry_safe
And add one line comment explaining what we're doing for each loop.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 9 Oct 2018 06:36:45 +0000 (14:36 +0800)]
btrfs: qgroup: Avoid calling qgroup functions if qgroup is not enabled
Some qgroup trace events like btrfs_qgroup_release_data() and
btrfs_qgroup_free_delayed_ref() can still be triggered even if qgroup is
not enabled.
This is caused by the lack of qgroup status check before calling some
qgroup functions. Thankfully the functions can handle quota disabled
case well and just do nothing for qgroup disabled case.
This patch will do earlier check before triggering related trace events.
And for enabled <-> disabled race case:
1) For enabled->disabled case
Disable will wipe out all qgroups data including reservation and
excl/rfer. Even if we leak some reservation or numbers, it will
still be cleared, so nothing will go wrong.
2) For disabled -> enabled case
Current btrfs_qgroup_release_data() will use extent_io tree to ensure
we won't underflow reservation. And for delayed_ref we use
head->qgroup_reserved to record the reserved space, so in that case
head->qgroup_reserved should be 0 and we won't underflow.
CC: stable@vger.kernel.org # 4.14+
Reported-by: Chris Murphy <lists@colorremedies.com>
Link: https://lore.kernel.org/linux-btrfs/CAJCQCtQau7DtuUUeycCkZ36qjbKuxNzsgqJ7+sJ6W0dK_NLE3w@mail.gmail.com/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 9 Oct 2018 14:05:29 +0000 (15:05 +0100)]
Btrfs: fix wrong dentries after fsync of file that got its parent replaced
In a scenario like the following:
mkdir /mnt/A # inode 258
mkdir /mnt/B # inode 259
touch /mnt/B/bar # inode 260
sync
mv /mnt/B/bar /mnt/A/bar
mv -T /mnt/A /mnt/B
fsync /mnt/B/bar
<power fail>
After replaying the log we end up with file bar having 2 hard links, both
with the name 'bar' and one in the directory with inode number 258 and the
other in the directory with inode number 259. Also, we end up with the
directory inode 259 still existing and with the directory inode 258 still
named as 'A', instead of 'B'. In this scenario, file 'bar' should only
have one hard link, located at directory inode 258, the directory inode
259 should not exist anymore and the name for directory inode 258 should
be 'B'.
This incorrect behaviour happens because when attempting to log the old
parents of an inode, we skip any parents that no longer exist. Fix this
by forcing a full commit if an old parent no longer exists.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 8 Oct 2018 10:12:55 +0000 (11:12 +0100)]
Btrfs: fix warning when replaying log after fsync of a tmpfile
When replaying a log which contains a tmpfile (which necessarily has a
link count of 0) we end up calling inc_nlink(), at
fs/btrfs/tree-log.c:replay_one_buffer(), which produces a warning like
the following:
[195191.943673] WARNING: CPU: 0 PID: 6924 at fs/inode.c:342 inc_nlink+0x33/0x40
[195191.943723] CPU: 0 PID: 6924 Comm: mount Not tainted 4.19.0-rc6-btrfs-next-38 #1
[195191.943724] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[195191.943726] RIP: 0010:inc_nlink+0x33/0x40
[195191.943728] RSP: 0018:
ffffb96e425e3870 EFLAGS:
00010246
[195191.943730] RAX:
0000000000000000 RBX:
ffff8c0d1e6af4f0 RCX:
0000000000000006
[195191.943731] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff8c0d1e6af4f0
[195191.943731] RBP:
0000000000000097 R08:
0000000000000001 R09:
0000000000000000
[195191.943732] R10:
0000000000000000 R11:
0000000000000000 R12:
ffffb96e425e3a60
[195191.943733] R13:
ffff8c0d10cff0c8 R14:
ffff8c0d0d515348 R15:
ffff8c0d78a1b3f8
[195191.943735] FS:
00007f570ee24480(0000) GS:
ffff8c0dfb200000(0000) knlGS:
0000000000000000
[195191.943736] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[195191.943737] CR2:
00005593286277c8 CR3:
00000000bb8f2006 CR4:
00000000003606f0
[195191.943739] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[195191.943740] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[195191.943741] Call Trace:
[195191.943778] replay_one_buffer+0x797/0x7d0 [btrfs]
[195191.943802] walk_up_log_tree+0x1c1/0x250 [btrfs]
[195191.943809] ? rcu_read_lock_sched_held+0x3f/0x70
[195191.943825] walk_log_tree+0xae/0x1d0 [btrfs]
[195191.943840] btrfs_recover_log_trees+0x1d7/0x4d0 [btrfs]
[195191.943856] ? replay_dir_deletes+0x280/0x280 [btrfs]
[195191.943870] open_ctree+0x1c3b/0x22a0 [btrfs]
[195191.943887] btrfs_mount_root+0x6b4/0x800 [btrfs]
[195191.943894] ? rcu_read_lock_sched_held+0x3f/0x70
[195191.943899] ? pcpu_alloc+0x55b/0x7c0
[195191.943906] ? mount_fs+0x3b/0x140
[195191.943908] mount_fs+0x3b/0x140
[195191.943912] ? __init_waitqueue_head+0x36/0x50
[195191.943916] vfs_kern_mount+0x62/0x160
[195191.943927] btrfs_mount+0x134/0x890 [btrfs]
[195191.943936] ? rcu_read_lock_sched_held+0x3f/0x70
[195191.943938] ? pcpu_alloc+0x55b/0x7c0
[195191.943943] ? mount_fs+0x3b/0x140
[195191.943952] ? btrfs_remount+0x570/0x570 [btrfs]
[195191.943954] mount_fs+0x3b/0x140
[195191.943956] ? __init_waitqueue_head+0x36/0x50
[195191.943960] vfs_kern_mount+0x62/0x160
[195191.943963] do_mount+0x1f9/0xd40
[195191.943967] ? memdup_user+0x4b/0x70
[195191.943971] ksys_mount+0x7e/0xd0
[195191.943974] __x64_sys_mount+0x21/0x30
[195191.943977] do_syscall_64+0x60/0x1b0
[195191.943980] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[195191.943983] RIP: 0033:0x7f570e4e524a
[195191.943986] RSP: 002b:
00007ffd83589478 EFLAGS:
00000206 ORIG_RAX:
00000000000000a5
[195191.943989] RAX:
ffffffffffffffda RBX:
0000563f335b2060 RCX:
00007f570e4e524a
[195191.943990] RDX:
0000563f335b2240 RSI:
0000563f335b2280 RDI:
0000563f335b2260
[195191.943992] RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000020
[195191.943993] R10:
00000000c0ed0000 R11:
0000000000000206 R12:
0000563f335b2260
[195191.943994] R13:
0000563f335b2240 R14:
0000000000000000 R15:
00000000ffffffff
[195191.944002] irq event stamp: 8688
[195191.944010] hardirqs last enabled at (8687): [<
ffffffff9cb004c3>] console_unlock+0x503/0x640
[195191.944012] hardirqs last disabled at (8688): [<
ffffffff9ca037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
[195191.944018] softirqs last enabled at (8638): [<
ffffffff9cc0a5d1>] __set_page_dirty_nobuffers+0x101/0x150
[195191.944020] softirqs last disabled at (8634): [<
ffffffff9cc26bbe>] wb_wakeup_delayed+0x2e/0x60
[195191.944022] ---[ end trace
5d6e873a9a0b811a ]---
This happens because the inode does not have the flag I_LINKABLE set,
which is a runtime only flag, not meant to be persisted, set when the
inode is created through open(2) if the flag O_EXCL is not passed to it.
Except for the warning, there are no other consequences (like corruptions
or metadata inconsistencies).
Since it's pointless to replay a tmpfile as it would be deleted in a
later phase of the log replay procedure (it has a link count of 0), fix
this by not logging tmpfiles and if a tmpfile is found in a log (created
by a kernel without this change), skip the replay of the inode.
A test case for fstests follows soon.
Fixes: 471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay")
CC: stable@vger.kernel.org # 4.18+
Reported-by: Martin Steigerwald <martin@lichtvoll.de>
Link: https://lore.kernel.org/linux-btrfs/3666619.NTnn27ZJZE@merkaba/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 28 Sep 2018 11:18:19 +0000 (07:18 -0400)]
btrfs: drop min_size from evict_refill_and_join
We don't need it, rsv->size is set once and never changes throughout
its lifetime, so just use that for the reserve size.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 28 Sep 2018 11:18:03 +0000 (07:18 -0400)]
btrfs: assert on non-empty delayed iputs
I ran into an issue where there was some reference being held on an
inode that I couldn't track. This assert wasn't triggered, but it at
least rules out we're doing something stupid.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 28 Sep 2018 11:18:02 +0000 (07:18 -0400)]
btrfs: make sure we create all new block groups
Allocating new chunks modifies both the extent and chunk tree, which can
trigger new chunk allocations. So instead of doing list_for_each_safe,
just do while (!list_empty()) so we make sure we don't exit with other
pending bg's still on our list.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 28 Sep 2018 11:18:00 +0000 (07:18 -0400)]
btrfs: reset max_extent_size on clear in a bitmap
We need to clear the max_extent_size when we clear bits from a bitmap
since it could have been from the range that contains the
max_extent_size.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 28 Sep 2018 11:17:49 +0000 (07:17 -0400)]
btrfs: protect space cache inode alloc with GFP_NOFS
If we're allocating a new space cache inode it's likely going to be
under a transaction handle, so we need to use memalloc_nofs_save() in
order to avoid deadlocks, and more importantly lockdep messages that
make xfstests fail.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 28 Sep 2018 11:17:48 +0000 (07:17 -0400)]
btrfs: release metadata before running delayed refs
We want to release the unused reservation we have since it refills the
delayed refs reserve, which will make everything go smoother when
running the delayed refs if we're short on our reservation.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 21 Aug 2018 21:54:37 +0000 (05:54 +0800)]
Btrfs: kill btrfs_clear_path_blocking
Btrfs's btree locking has two modes, spinning mode and blocking mode,
while searching btree, locking is always acquired in spinning mode and
then converted to blocking mode if necessary, and in some hot paths we may
switch the locking back to spinning mode by btrfs_clear_path_blocking().
When acquiring locks, both of reader and writer need to wait for blocking
readers and writers to complete before doing read_lock()/write_lock().
The problem is that btrfs_clear_path_blocking() needs to switch nodes
in the path to blocking mode at first (by btrfs_set_path_blocking) to
make lockdep happy before doing its actual clearing blocking job.
When switching to blocking mode from spinning mode, it consists of
step 1) bumping up blocking readers counter and
step 2) read_unlock()/write_unlock(),
this has caused serious ping-pong effect if there're a great amount of
concurrent readers/writers, as waiters will be woken up and go to
sleep immediately.
1) Killing this kind of ping-pong results in a big improvement in my 1600k
files creation script,
MNT=/mnt/btrfs
mkfs.btrfs -f /dev/sdf
mount /dev/def $MNT
time fsmark -D 10000 -S0 -n 100000 -s 0 -L 1 -l /tmp/fs_log.txt \
-d $MNT/0 -d $MNT/1 \
-d $MNT/2 -d $MNT/3 \
-d $MNT/4 -d $MNT/5 \
-d $MNT/6 -d $MNT/7 \
-d $MNT/8 -d $MNT/9 \
-d $MNT/10 -d $MNT/11 \
-d $MNT/12 -d $MNT/13 \
-d $MNT/14 -d $MNT/15
w/o patch:
real 2m27.307s
user 0m12.839s
sys 13m42.831s
w/ patch:
real 1m2.273s
user 0m15.802s
sys 8m16.495s
1.1) latency histogram from funclatency[1]
Overall with the patch, there're ~50% less write lock acquisition and
the 95% max latency that write lock takes also reduces to ~100ms from
>500ms.
--------------------------------------------
w/o patch:
--------------------------------------------
Function = btrfs_tree_lock
msecs : count distribution
0 -> 1 :
2385222 |****************************************|
2 -> 3 : 37147 | |
4 -> 7 : 20452 | |
8 -> 15 : 13131 | |
16 -> 31 : 3877 | |
32 -> 63 : 3900 | |
64 -> 127 : 2612 | |
128 -> 255 : 974 | |
256 -> 511 : 165 | |
512 -> 1023 : 13 | |
Function = btrfs_tree_read_lock
msecs : count distribution
0 -> 1 :
6743860 |****************************************|
2 -> 3 : 2146 | |
4 -> 7 : 190 | |
8 -> 15 : 38 | |
16 -> 31 : 4 | |
--------------------------------------------
w/ patch:
--------------------------------------------
Function = btrfs_tree_lock
msecs : count distribution
0 -> 1 :
1318454 |****************************************|
2 -> 3 : 6800 | |
4 -> 7 : 3664 | |
8 -> 15 : 2145 | |
16 -> 31 : 809 | |
32 -> 63 : 219 | |
64 -> 127 : 10 | |
Function = btrfs_tree_read_lock
msecs : count distribution
0 -> 1 :
6854317 |****************************************|
2 -> 3 : 2383 | |
4 -> 7 : 601 | |
8 -> 15 : 92 | |
2) dbench also proves the improvement,
dbench -t 120 -D /mnt/btrfs 16
w/o patch:
Throughput 158.363 MB/sec
w/ patch:
Throughput 449.52 MB/sec
3) xfstests didn't show any additional failures.
One thing to note is that callers may set path->leave_spinning to have
all nodes in the path stay in spinning mode, which means callers are
ready to not sleep before releasing the path, but it won't cause
problems if they don't want to sleep in blocking mode.
[1]: https://github.com/iovisor/bcc/blob/master/tools/funclatency.py
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 4 Apr 2018 23:19:50 +0000 (01:19 +0200)]
btrfs: dev-replace: remove pointless assert in write unlock
The value of blocking_readers is increased only when the lock is taken
for read, no way we can fail the condition with the write lock.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 4 Apr 2018 23:04:49 +0000 (01:04 +0200)]
btrfs: dev-replace: move replace members out of fs_info
The replace_wait and bio_counter were mistakenly added to fs_info in
commit
c404e0dc2c843b154f ("Btrfs: fix use-after-free in the finishing
procedure of the device replace"), but they logically belong to
fs_info::dev_replace. Besides, bio_counter is a very generic name and is
confusing in bare fs_info context.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 24 Aug 2018 15:44:05 +0000 (17:44 +0200)]
btrfs: dev-replace: avoid useless lock on error handling path
The exit sequence in btrfs_dev_replace_start does not allow to simply
add a label to the right place so the error handling after starting
transaction failure jumps there. Currently there's a lock that pairs
with the unlock in the section, which is unnecessary and only raises
questions. Add a variable to track the locking status and avoid the
extra locking.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 24 Aug 2018 15:41:17 +0000 (17:41 +0200)]
btrfs: open code btrfs_after_dev_replace_commit
Too trivial, the purpose can be simply documented in a comment.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 4 Apr 2018 15:20:52 +0000 (17:20 +0200)]
btrfs: open code btrfs_dev_replace_stats_inc
The wrapper is too trivial, open coding does not make it less readable.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 24 Aug 2018 15:33:58 +0000 (17:33 +0200)]
btrfs: open code btrfs_dev_replace_clear_lock_blocking
There's a single caller and the function name does not say it's actually
taking the lock, so open coding makes it more explicit.
For now, btrfs_dev_replace_read_lock is used instead of read_lock so
it's paired with the unlocking wrapper in the same block.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 24 Aug 2018 15:32:29 +0000 (17:32 +0200)]
btrfs: remove btrfs_dev_replace::read_locks
This member seems to be copied from the extent_buffer locking scheme and
is at least used to assert that the read lock/unlock is properly nested.
In some way. While the _inc/_dec are called inside the read lock
section, the asserts are both inside and outside, so the ordering is not
guaranteed and we can see read/inc/dec ordered in any way
(theoretically).
A missing call of btrfs_dev_replace_clear_lock_blocking could cause
unexpected read_locks count, so this at least looks like a valid
assertion, but this will become unnecessary with later updates.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 27 Sep 2018 23:59:34 +0000 (07:59 +0800)]
btrfs: tree-checker: Check level for leaves and nodes
Although we have tree level check at tree read runtime, it's completely
based on its parent level.
We still need to do accurate level check to avoid invalid tree blocks
sneak into kernel space.
The check itself is simple, for leaf its level should always be 0.
For nodes its level should be in range [1, BTRFS_MAX_LEVEL - 1].
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 27 Sep 2018 06:42:35 +0000 (14:42 +0800)]
btrfs: qgroup: Only trace data extents in leaves if we're relocating data block group
For qgroup_trace_extent_swap(), if we find one leaf that needs to be
traced, we will also iterate all file extents and trace them.
This is OK if we're relocating data block groups, but if we're
relocating metadata block groups, balance code itself has ensured that
both subtree of file tree and reloc tree contain the same contents.
That's to say, if we're relocating metadata block groups, all file
extents in reloc and file tree should match, thus no need to trace them.
This should reduce the total number of dirty extents processed in metadata
block group balance.
[[Benchmark]] (with all previous enhancement)
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.
Mkfs parameter:
--nodesize 4K (To bump up tree size)
Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)
Snapshots:
16 snapshots of the original subvolume.
each snapshot has 3 random files modified.
balance parameter:
-m
So the content should be pretty similar to a real world root fs layout.
| v4.19-rc1 | w/ patchset | diff (*)
---------------------------------------------------------------
relocated extents | 22929 | 22851 | -0.3%
qgroup dirty extents | 227757 | 140886 | -38.1%
time (sys) | 65.253s | 37.464s | -42.6%
time (real) | 74.032s | 44.722s | -39.6%
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 27 Sep 2018 06:42:33 +0000 (14:42 +0800)]
btrfs: qgroup: Don't trace subtree if we're dropping reloc tree
Reloc tree doesn't contribute to qgroup numbers, as we have accounted
them at balance time (see replace_path()).
Skipping the unneeded subtree tracing should reduce the overhead.
[[Benchmark]]
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.
Mkfs parameter:
--nodesize 4K (To bump up tree size)
Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)
Snapshots:
16 snapshots of the original subvolume.
each snapshot has 3 random files modified.
balance parameter:
-m
So the content should be pretty similar to a real world root fs layout.
| v4.19-rc1 | w/ patchset | diff (*)
---------------------------------------------------------------
relocated extents | 22929 | 22900 | -0.1%
qgroup dirty extents | 227757 | 167139 | -26.6%
time (sys) | 65.253s | 50.123s | -23.2%
time (real) | 74.032s | 52.551s | -29.0%
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 27 Sep 2018 06:42:32 +0000 (14:42 +0800)]
btrfs: qgroup: Use generation-aware subtree swap to mark dirty extents
Before this patch, with quota enabled during balance, we need to mark
the whole subtree dirty for quota.
E.g.
OO = Old tree blocks (from file tree)
NN = New tree blocks (from reloc tree)
File tree (src) Reloc tree (dst)
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO (d) OO OO OO NN (d)
For old balance + quota case, quota will mark the whole src and dst tree
dirty, including all the 3 old tree blocks in reloc tree.
It's doable for small file tree or new tree blocks are all located at
lower level.
But for large file tree or new tree blocks are all located at higher
level, this will lead to mark the whole tree dirty, and be unbelievably
slow.
This patch will change how we handle such balance with quota enabled
case.
Now we will search from (b) and (c) for any new tree blocks whose
generation is equal to @last_snapshot, and only mark them dirty.
In above case, we only need to trace tree blocks NN(b), NN(c) and NN(d).
(NN(a) will be traced when COW happens for nodeptr modification). And
also for tree blocks OO(b), OO(c), OO(d). (OO(a) will be traced when COW
happens for nodeptr modification.)
For above case, we could skip 3 tree blocks, but for larger tree, we can
skip tons of unmodified tree blocks, and hugely speed up balance.
This patch will introduce a new function,
btrfs_qgroup_trace_subtree_swap(), which will do the following main
work:
1) Read out real root eb
And setup basic dst_path for later calls
2) Call qgroup_trace_new_subtree_blocks()
To trace all new tree blocks in reloc tree and their counter
parts in the file tree.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 27 Sep 2018 06:42:31 +0000 (14:42 +0800)]
btrfs: qgroup: Introduce function to find all new tree blocks of reloc tree
Introduce new function, qgroup_trace_new_subtree_blocks(), to iterate
all new tree blocks in a reloc tree.
So that qgroup could skip unrelated tree blocks during balance, which
should hugely speedup balance speed when quota is enabled.
The function qgroup_trace_new_subtree_blocks() itself only cares about
new tree blocks in reloc tree.
All its main works are:
1) Read out tree blocks according to parent pointers
2) Do recursive depth-first search
Will call the same function on all its children tree blocks, with
search level set to current level -1.
And will also skip all children whose generation is smaller than
@last_snapshot.
3) Call qgroup_trace_extent_swap() to trace tree blocks
So although we have parameter list related to source file tree, it's not
used at all, but only passed to qgroup_trace_extent_swap().
Thus despite the tree read code, the core should be pretty short and all
about recursive depth-first search.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 27 Sep 2018 06:42:30 +0000 (14:42 +0800)]
btrfs: qgroup: Introduce function to trace two swaped extents
Introduce a new function, qgroup_trace_extent_swap(), which will be used
later for balance qgroup speedup.
The basis idea of balance is swapping tree blocks between reloc tree and
the real file tree.
The swap will happen in highest tree block, but there may be a lot of
tree blocks involved.
For example:
OO = Old tree blocks
NN = New tree blocks allocated during balance
File tree (257) Reloc tree for 257
L2 OO NN
/ \ / \
L1 OO OO (a) OO NN (a)
/ \ / \ / \ / \
L0 OO OO OO OO OO OO NN NN
(b) (c) (b) (c)
When calling qgroup_trace_extent_swap(), we will pass:
@src_eb = OO(a)
@dst_path = [ nodes[1] = NN(a), nodes[0] = NN(c) ]
@dst_level = 0
@root_level = 1
In that case, qgroup_trace_extent_swap() will search from OO(a) to
reach OO(c), then mark both OO(c) and NN(c) as qgroup dirty.
The main work of qgroup_trace_extent_swap() can be split into 3 parts:
1) Tree search from @src_eb
It should acts as a simplified btrfs_search_slot().
The key for search can be extracted from @dst_path->nodes[dst_level]
(first key).
2) Mark the final tree blocks in @src_path and @dst_path qgroup dirty
NOTE: In above case, OO(a) and NN(a) won't be marked qgroup dirty.
They should be marked during preivous (@dst_level = 1) iteration.
3) Mark file extents in leaves dirty
We don't have good way to pick out new file extents only.
So we still follow the old method by scanning all file extents in
the leave.
This function can free us from keeping two pathes, thus later we only need
to care about how to iterate all new tree blocks in reloc tree.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ copy changelog to function comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 27 Sep 2018 06:42:29 +0000 (14:42 +0800)]
btrfs: qgroup: Introduce trace event to analyse the number of dirty extents accounted
Number of qgroup dirty extents is directly linked to the performance
overhead, so add a new trace event, trace_qgroup_num_dirty_extents(), to
record how many dirty extents is processed in
btrfs_qgroup_account_extents().
This will be pretty handy to analyze later balance performance
improvement.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 25 Sep 2018 06:37:46 +0000 (14:37 +0800)]
btrfs: relocation: Add basic extent backref related comments for build_backref_tree
fs/btrfs/relocation.c:build_backref_tree() is some code from 2009 era,
although it works pretty fine, it's not that easy to understand.
Especially combined with the complex btrfs backref format.
This patch adds some basic comment for the backref build part of the
code, making it less hard to read, at least for backref searching part.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Mon, 24 Sep 2018 22:16:55 +0000 (15:16 -0700)]
Btrfs: get rid of btrfs_symlink_aops
The only aops we define for symlinks are identical to the aops for
regular files. This has been the case since symlink support was added in
commit
2b8d99a723a3 ("Btrfs: symlinks and hard links"). As far as I can
tell, there wasn't a good reason to have separate aops then, and there
isn't now, so let's just do what most other filesystems do and reuse the
same structure.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Chris Mason [Wed, 20 Jun 2018 14:56:11 +0000 (07:56 -0700)]
Btrfs: don't clean dirty pages during buffered writes
During buffered writes, we follow this basic series of steps:
again:
lock all the pages
wait for writeback on all the pages
Take the extent range lock
wait for ordered extents on the whole range
clean all the pages
if (copy_from_user_in_atomic() hits a fault) {
drop our locks
goto again;
}
dirty all the pages
release all the locks
The extra waiting, cleaning and locking are there to make sure we don't
modify pages in flight to the drive, after they've been crc'd.
If some of the pages in the range were already dirty when the write
began, and we need to goto again, we create a window where a dirty page
has been cleaned and unlocked. It may be reclaimed before we're able to
lock it again, which means we'll read the old contents off the drive and
lose any modifications that had been pending writeback.
We don't actually need to clean the pages. All of the other locking in
place makes sure we don't start IO on the pages, so we can just leave
them dirty for the duration of the write.
Fixes: 73d59314e6ed (the original btrfs merge)
CC: stable@vger.kernel.org # v4.4+
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 21 Sep 2018 12:26:34 +0000 (14:26 +0200)]
btrfs: use common helper instead of open coding a bit test
The helper does the same math and we take care about the special case
when flags is 0 too.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 15 Aug 2018 07:39:56 +0000 (10:39 +0300)]
btrfs: refactor __btrfs_run_delayed_refs loop
Refactor the delayed refs loop by using the newly introduced
btrfs_run_delayed_refs_for_head function. This greatly simplifies
__btrfs_run_delayed_refs and makes it more obvious what is happening.
We now have 1 loop which iterates the existing delayed_heads and then
each selected ref head is processed by the new helper. All existing
semantics of the code are preserved so no functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 15 Aug 2018 07:39:55 +0000 (10:39 +0300)]
btrfs: Factor out loop processing all refs of a head
This patch introduces a new helper encompassing the implicit inner loop
in __btrfs_run_delayed_refs which processes all the refs for a given
head. The code is mostly copy/paste, the only difference is that if we
detect a newer reference then -EAGAIN is returned so that callers can
react correctly.
Also, at the end of the loop the head is relocked and
btrfs_merge_delayed_refs is run again to retain the pre-refactoring
semantics.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 15 Aug 2018 07:39:54 +0000 (10:39 +0300)]
btrfs: Factor out ref head locking code in __btrfs_run_delayed_refs
This is in preparation to refactor the giant loop in
__btrfs_run_delayed_refs. As a first step define a new function
which implements acquiring a reference to a btrfs_delayed_refs_head and
use it. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 17 Aug 2018 15:48:13 +0000 (17:48 +0200)]
btrfs: tests: polish ifdefs around testing helper
Avoid the inline ifdefs and use two sections for self-tests enabled and
disabled.
Though there could be no ifdef and unconditional test_bit of
BTRFS_FS_STATE_DUMMY_FS_INFO, the static inline can help to optimize out
any code that would depend on conditions using btrfs_is_testing.
As this is only for the testing code, drop unlikely().
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 17 Aug 2018 15:44:13 +0000 (17:44 +0200)]
btrfs: tests: group declarations of self-test helpers
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 17 Aug 2018 15:38:12 +0000 (17:38 +0200)]
btrfs: tests: move testing members of struct btrfs_root to the end
The data used only for tests are better placed at the end of the
structure so that they don't change the structure layout. All new
members of btrfs_root should be placed before.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 17 Aug 2018 15:28:06 +0000 (17:28 +0200)]
btrfs: tests: add separate stub for find_lock_delalloc_range
The helper find_lock_delalloc_range is now conditionally built static,
dpending on whether the self-tests are enabled or not. There's a macro
that is supposed to hide the export, used only once. To discourage
further use, drop it an add a public wrapper for the helper needed by
tests.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 19:51:53 +0000 (03:51 +0800)]
Btrfs: preftree: use rb_first_cached
rb_first_cached() trades an extra pointer "leftmost" for doing the same
job as rb_first() but in O(1).
While resolving indirect refs and missing refs, it always looks for the
first rb entry in a while loop, it's helpful to use rb_first_cached
instead.
For more details about the optimization see patch "Btrfs: delayed-refs:
use rb_first_cached for href_root".
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 19:51:52 +0000 (03:51 +0800)]
Btrfs: extent_map: use rb_first_cached
rb_first_cached() trades an extra pointer "leftmost" for doing the
same job as rb_first() but in O(1).
As evict_inode_truncate_pages() removes all extent mapping by always
looking for the first rb entry, it's helpful to use rb_first_cached
instead.
For more details about the optimization see patch "Btrfs: delayed-refs:
use rb_first_cached for href_root".
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 19:51:51 +0000 (03:51 +0800)]
Btrfs: delayed-inode: use rb_first_cached for ins_root and del_root
rb_first_cached() trades an extra pointer "leftmost" for doing the same job as
rb_first() but in O(1).
Functions manipulating delayed_item need to get the first entry, this converts
it to use rb_first_cached().
For more details about the optimization see patch "Btrfs: delayed-refs:
use rb_first_cached for href_root".
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 19:51:50 +0000 (03:51 +0800)]
Btrfs: delayed-refs: use rb_first_cached for ref_tree
rb_first_cached() trades an extra pointer "leftmost" for doing the same
job as rb_first() but in O(1).
Functions manipulating href->ref_tree need to get the first entry, this
converts href->ref_tree to use rb_first_cached().
For more details about the optimization see patch "Btrfs: delayed-refs:
use rb_first_cached for href_root".
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 19:51:49 +0000 (03:51 +0800)]
Btrfs: delayed-refs: use rb_first_cached for href_root
rb_first_cached() trades an extra pointer "leftmost" for doing the same
job as rb_first() but in O(1).
Functions manipulating href_root need to get the first entry, this
converts href_root to use rb_first_cached().
This patch is first in the sequenct of similar updates to other rbtrees
and this is analysis of the expected behaviour and improvements.
There's a common pattern:
while (node = rb_first) {
entry = rb_entry(node)
next = rb_next(node)
rb_erase(node)
cleanup(entry)
}
rb_first needs to traverse the tree up to logN depth, rb_erase can
completely reshuffle the tree. With the caching we'll skip the traversal
in rb_first. That's a cached memory access vs looped pointer
dereference trade-off that IMHO has a clear winner.
Measurements show there's not much difference in a sample tree with
10000 nodes: 4.5s / rb_first and 4.8s / rb_first_cached. Real effects of
caching and pointer chasing are unpredictable though.
Further optimzations can be done to avoid the expensive rb_erase step.
In some cases it's ok to process the nodes in any order, so the tree can
be traversed in post-order, not rebalancing the children nodes and just
calling free. Care must be taken regarding the next node.
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog from mail discussions ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 12 Sep 2018 14:45:45 +0000 (10:45 -0400)]
btrfs: wait on caching when putting the bg cache
While testing my backport I noticed there was a panic if I ran
generic/416 generic/417 generic/418 all in a row. This just happened to
uncover a race where we had outstanding IO after we destroy all of our
workqueues, and then we'd go to queue the endio work on those free'd
workqueues.
This is because we aren't waiting for the caching threads to be done
before freeing everything up, so to fix this make sure we wait on any
outstanding caching that's being done before we free up the block group,
so we're sure to be done with all IO by the time we get to
btrfs_stop_all_workers(). This fixes the panic I was seeing
consistently in testing.
------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:6112!
SMP PTI
Modules linked in:
CPU: 1 PID: 27165 Comm: kworker/u4:7 Not tainted
4.16.0-02155-g3553e54a578d-dirty #875
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: btrfs-cache btrfs_cache_helper
RIP: 0010:btrfs_map_bio+0x346/0x370
RSP: 0000:
ffffc900061e79d0 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
ffff880071542e00 RCX:
0000000000533000
RDX:
ffff88006bb74380 RSI:
0000000000000008 RDI:
ffff880078160000
RBP:
0000000000000001 R08:
ffff8800781cd200 R09:
0000000000503000
R10:
ffff88006cd21200 R11:
0000000000000000 R12:
0000000000000000
R13:
0000000000000000 R14:
ffff8800781cd200 R15:
ffff880071542e00
FS:
0000000000000000(0000) GS:
ffff88007fd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000817ffc4 CR3:
0000000078314000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
btree_submit_bio_hook+0x8a/0xd0
submit_one_bio+0x5d/0x80
read_extent_buffer_pages+0x18a/0x320
btree_read_extent_buffer_pages+0xbc/0x200
? alloc_extent_buffer+0x359/0x3e0
read_tree_block+0x3d/0x60
read_block_for_search.isra.30+0x1a5/0x360
btrfs_search_slot+0x41b/0xa10
btrfs_next_old_leaf+0x212/0x470
caching_thread+0x323/0x490
normal_work_helper+0xc5/0x310
process_one_work+0x141/0x340
worker_thread+0x44/0x3c0
kthread+0xf8/0x130
? process_one_work+0x340/0x340
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
RIP: btrfs_map_bio+0x346/0x370 RSP:
ffffc900061e79d0
---[ end trace
827eb13e50846033 ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Thu, 6 Sep 2018 21:18:16 +0000 (17:18 -0400)]
btrfs: keep trim from interfering with transaction commits
Commit
499f377f49f08 (btrfs: iterate over unused chunk space in FITRIM)
fixed free space trimming, but introduced latency when it was running.
This is due to it pinning the transaction using both a incremented
refcount and holding the commit root sem for the duration of a single
trim operation.
This was to ensure safety but it's unnecessary. We already hold the the
chunk mutex so we know that the chunk we're using can't be allocated
while we're trimming it.
In order to check against chunks allocated already in this transaction,
we need to check the pending chunks list. To to that safely without
joining the transaction (or attaching than then having to commit it) we
need to ensure that the dev root's commit root doesn't change underneath
us and the pending chunk lists stays around until we're done with it.
We can ensure the former by holding the commit root sem and the latter
by pinning the transaction. We do this now, but the critical section
covers the trim operation itself and we don't need to do that.
This patch moves the pinning and unpinning logic into helpers and unpins
the transaction after performing the search and check for pending
chunks.
Limiting the critical section of the transaction pinning improves the
latency substantially on slower storage (e.g. image files over NFS).
Fixes: 499f377f49f08 ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Thu, 6 Sep 2018 21:18:15 +0000 (17:18 -0400)]
btrfs: don't attempt to trim devices that don't support it
We check whether any device the file system is using supports discard in
the ioctl call, but then we attempt to trim free extents on every device
regardless of whether discard is supported. Due to the way we mask off
EOPNOTSUPP, we can end up issuing the trim operations on each free range
on devices that don't support it, just wasting time.
Fixes: 499f377f49f08 ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Thu, 6 Sep 2018 21:18:14 +0000 (17:18 -0400)]
btrfs: iterate all devices during trim, instead of fs_devices::alloc_list
btrfs_trim_fs iterates over the fs_devices->alloc_list while holding the
device_list_mutex. The problem is that ->alloc_list is protected by the
chunk mutex. We don't want to hold the chunk mutex over the trim of the
entire file system. Fortunately, the ->dev_list list is protected by
the dev_list mutex and while it will give us all devices, including
read-only devices, we already just skip the read-only devices. Then we
can continue to take and release the chunk mutex while scanning each
device.
Fixes: 499f377f49f ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 7 Sep 2018 06:16:24 +0000 (14:16 +0800)]
btrfs: Ensure btrfs_trim_fs can trim the whole filesystem
[BUG]
fstrim on some btrfs only trims the unallocated space, not trimming any
space in existing block groups.
[CAUSE]
Before fstrim_range passed to btrfs_trim_fs(), it gets truncated to
range [0, super->total_bytes). So later btrfs_trim_fs() will only be
able to trim block groups in range [0, super->total_bytes).
While for btrfs, any bytenr aligned to sectorsize is valid, since btrfs
uses its logical address space, there is nothing limiting the location
where we put block groups.
For filesystem with frequent balance, it's quite easy to relocate all
block groups and bytenr of block groups will start beyond
super->total_bytes.
In that case, btrfs will not trim existing block groups.
[FIX]
Just remove the truncation in btrfs_ioctl_fitrim(), so btrfs_trim_fs()
can get the unmodified range, which is normally set to [0, U64_MAX].
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: f4c697e6406d ("btrfs: return EINVAL if start > total_bytes in fitrim ioctl")
CC: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 7 Sep 2018 06:16:23 +0000 (14:16 +0800)]
btrfs: Enhance btrfs_trim_fs function to handle error better
Function btrfs_trim_fs() doesn't handle errors in a consistent way. If
error happens when trimming existing block groups, it will skip the
remaining blocks and continue to trim unallocated space for each device.
The return value will only reflect the final error from device trimming.
This patch will fix such behavior by:
1) Recording the last error from block group or device trimming
The return value will also reflect the last error during trimming.
Make developer more aware of the problem.
2) Continuing trimming if possible
If we failed to trim one block group or device, we could still try
the next block group or device.
3) Report number of failures during block group and device trimming
It would be less noisy, but still gives user a brief summary of
what's going wrong.
Such behavior can avoid confusion for cases like failure to trim the
first block group and then only unallocated space is trimmed.
Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add bg_ret and dev_ret to the messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Thu, 6 Sep 2018 19:52:17 +0000 (15:52 -0400)]
btrfs: fix error handling in btrfs_dev_replace_start
When we fail to start a transaction in btrfs_dev_replace_start, we leave
dev_replace->replace_start set to STARTED but clear ->srcdev and
->tgtdev. Later, that can result in an Oops in
btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED
implies that ->srcdev is valid.
Also fix error handling when the state is already STARTED or SUSPENDED
while starting. That, too, will clear ->srcdev and ->tgtdev even though
it doesn't own them. This should be an impossible case to hit since we
should be protected by the BTRFS_FS_EXCL_OP bit being set. Let's add an
ASSERT there while we're at it.
Fixes: e93c89c1aaaaa (Btrfs: add new sources for device replace code)
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
zhong jiang [Thu, 13 Sep 2018 03:01:15 +0000 (11:01 +0800)]
btrfs: change remove_extent_mapping to return void
remove_extent_mapping uses the variable "ret" for return value, but it
is not modified after initialzation. Further, I find that any of the
callers do not handle the return value and the callees are only simple
functions so the return values does not need to be passed.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 13 Sep 2018 08:35:10 +0000 (11:35 +0300)]
btrfs: handle error of get_old_root
In btrfs_search_old_slot get_old_root is always used with the assumption
it cannot fail. However, this is not true in rare circumstance it can
fail and return null. This will lead to null point dereference when the
header is read. Fix this by checking the return value and properly
handling NULL by setting ret to -EIO and returning gracefully.
Coverity-id:
1087503
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 13 Sep 2018 08:35:00 +0000 (11:35 +0300)]
btrfs: Remove logically dead code from btrfs_orphan_cleanup
In btrfs_orphan_cleanup the final 'if (ret) goto out' cannot ever be
executed. This is due to the last assignment to 'ret' depending on the
return value of btrfs_iget. If an error other than -ENOENT is returned
then the loop is prematurely terminated by 'goto out'. On the other
hand, if the error value is ENOENT then a subsequent if branch is
executed that always re-assigns 'ret' and in case it's an error just
terminates the loop. No functional changes.
Coverity-id:
1437392
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 11 Sep 2018 22:06:22 +0000 (06:06 +0800)]
Btrfs: remove wait_ordered_range in btrfs_evict_inode
When we delete an inode,
btrfs_evict_inode() {
truncate_inode_pages_final()
truncate_inode_pages_range()
lock_page()
truncate_cleanup_page()
btrfs_invalidatepage()
wait_on_page_writeback
btrfs_lookup_ordered_range()
cancel_dirty_page()
unlock_page()
...
btrfs_wait_ordered_range()
...
As VFS has called ->invalidatepage() to get all ordered extents done (if
there are any) and truncated all page cache pages (no dirty pages to
writeback after this step), wait_ordered_range() is just a noop.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Thu, 13 Sep 2018 17:44:42 +0000 (01:44 +0800)]
Btrfs: skip set_page_dirty if eb pages are already dirty
As long as @eb is marked with EXTENT_BUFFER_DIRTY, all of its pages
are dirty, so no need to set pages dirty again.
Ftrace showed that the loop took 10us on my dev box, so removing this
can save us at least 10us if eb is already dirty and otherwise avoid a
potentially expensive calls to set_page_dirty.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Thu, 13 Sep 2018 17:46:08 +0000 (01:46 +0800)]
Btrfs: assert page dirty bit on extent buffer pages
Just in case that someone breaks the rule that pages are dirty as long
as eb is dirty. The next patch will dirty the pages conditionally.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 11 Sep 2018 22:06:23 +0000 (06:06 +0800)]
Btrfs: remove unnecessary level check in balance_level
In the callchain:
btrfs_search_slot()
if (level != 0)
setup_nodes_for_search()
balance_level()
It is just impossible to have level=0 in balance_level, we can drop the
check.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 11 Sep 2018 22:06:26 +0000 (06:06 +0800)]
Btrfs: unify error handling of btrfs_lookup_dir_item
Unify the error handling of directory item lookups using IS_ERR_OR_NULL.
No functional changes.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Fri, 7 Sep 2018 20:41:40 +0000 (04:41 +0800)]
Btrfs: use args in the correct order for kcalloc in btrfsic_read_block
kcalloc is defined as:
kcalloc(size_t n, size_t size, gfp_t flags)
Although this won't cause problems in practice, btrfsic_read_block()
uses kcalloc with n and size in the opposite order.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Sep 2018 09:46:14 +0000 (12:46 +0300)]
btrfs: Make btrfs_find_device_by_devspec return btrfs_device directly
Instead of returning an error value and using one of the parameters for
returning the actual object we are interested in just refactor the
function to directly return btrfs_device *. Also bubble up the error
handling for the special BTRFS_ERROR_DEV_MISSING_NOT_FOUND value into
btrfs_rm_device. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Sep 2018 09:46:13 +0000 (12:46 +0300)]
btrfs: Make btrfs_find_device_missing_or_by_path return directly a device
This function returns a numeric error value and additionally the
device found in one of its input parameters. Simplify this by making
the function directly return a pointer to btrfs_device. Additionally
adjust the caller to handle the case when we want to remove the
'missing' device and ENOENT is returned to return the expected
positive error value, parsed by progs. Finally, unexport the function
since it's not called outside of volume.c. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Sep 2018 09:46:12 +0000 (12:46 +0300)]
btrfs: Make btrfs_find_device_by_path return struct btrfs_device
Currently this function returns an error code as well as uses one of
its arguments as a return value for struct btrfs_device. Change the
function so that it returns btrfs_device directly and use the usual
"encode error in pointer" mechanics if something goes wrong. No
functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Thu, 6 Sep 2018 20:59:33 +0000 (16:59 -0400)]
btrfs: fix error handling in free_log_tree
When we hit an I/O error in free_log_tree->walk_log_tree during file system
shutdown we can crash due to there not being a valid transaction handle.
Use btrfs_handle_fs_error when there's no transaction handle to use.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000060
IP: free_log_tree+0xd2/0x140 [btrfs]
PGD 0 P4D 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
Modules linked in: <modules>
CPU: 2 PID: 23544 Comm: umount Tainted: G W 4.12.14-kvmsmall #9 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
task:
ffff96bfd3478880 task.stack:
ffffa7cf40d78000
RIP: 0010:free_log_tree+0xd2/0x140 [btrfs]
RSP: 0018:
ffffa7cf40d7bd10 EFLAGS:
00010282
RAX:
00000000fffffffb RBX:
00000000fffffffb RCX:
0000000000000002
RDX:
0000000000000000 RSI:
ffff96c02f07d4c8 RDI:
0000000000000282
RBP:
ffff96c013cf1000 R08:
ffff96c02f07d4c8 R09:
ffff96c02f07d4d0
R10:
0000000000000000 R11:
0000000000000002 R12:
0000000000000000
R13:
ffff96c005e800c0 R14:
ffffa7cf40d7bdb8 R15:
0000000000000000
FS:
00007f17856bcfc0(0000) GS:
ffff96c03f600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000060 CR3:
0000000045ed6002 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
? wait_for_writer+0xb0/0xb0 [btrfs]
btrfs_free_log+0x17/0x30 [btrfs]
btrfs_drop_and_free_fs_root+0x9a/0xe0 [btrfs]
btrfs_free_fs_roots+0xc0/0x130 [btrfs]
? wait_for_completion+0xf2/0x100
close_ctree+0xea/0x2e0 [btrfs]
? kthread_stop+0x161/0x260
generic_shutdown_super+0x6c/0x120
kill_anon_super+0xe/0x20
btrfs_kill_super+0x13/0x100 [btrfs]
deactivate_locked_super+0x3f/0x70
cleanup_mnt+0x3b/0x70
task_work_run+0x78/0x90
exit_to_usermode_loop+0x77/0xa6
do_syscall_64+0x1c5/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f1784f90827
RSP: 002b:
00007ffdeeb03118 EFLAGS:
00000246 ORIG_RAX:
00000000000000a6
RAX:
0000000000000000 RBX:
0000556a60c62970 RCX:
00007f1784f90827
RDX:
0000000000000001 RSI:
0000000000000000 RDI:
0000556a60c62b50
RBP:
0000000000000000 R08:
0000000000000005 R09:
00000000ffffffff
R10:
0000556a60c63900 R11:
0000000000000246 R12:
0000556a60c62b50
R13:
00007f17854a81c4 R14:
0000000000000000 R15:
0000000000000000
RIP: free_log_tree+0xd2/0x140 [btrfs] RSP:
ffffa7cf40d7bd10
CR2:
0000000000000060
Fixes: 681ae50917df9 ("Btrfs: cleanup reserved space when freeing tree log on error")
CC: <stable@vger.kernel.org> # v3.13
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Misono Tomohiro [Thu, 30 Aug 2018 01:59:16 +0000 (10:59 +0900)]
btrfs: remove redundant variable from btrfs_cross_ref_exist
Since commit
d7df2c796d7e ("Btrfs attach delayed ref updates to delayed
ref heads"), check_delayed_ref() won't return -ENOENT.
In btrfs_cross_ref_exist(), two variables 'ret' and 'ret2' are
originally used to handle -ENOENT error case. Since the code is not
needed anymore, let's just remove 'ret2'.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Sat, 25 Aug 2018 05:47:09 +0000 (13:47 +0800)]
Btrfs: set leave_spinning in btrfs_get_extent
Unless it's going to read inline extents from btree leaf to page,
btrfs_get_extent won't sleep during the period of holding path lock.
This sets leave_spinning at first and sets path to blocking mode right
before reading inline extent if that's the case. The benefit is that a
path in spinning mode typically has lower impact (faster) on waiters
rather than that in the blocking mode.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Sat, 25 Aug 2018 05:47:59 +0000 (13:47 +0800)]
Btrfs: fix alignment in declaration and prototype of btrfs_get_extent
This fixes btrfs_get_extent to be consistent with our existing
declaration style.
Note: For the record, indentation styles that are accepted are both,
aligning under the opening ( and tab or double tab indentation on the
next line. Preferrably not spliting the type or long expressions in the
argument lists.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Colin Ian King [Tue, 28 Aug 2018 13:21:01 +0000 (14:21 +0100)]
btrfs: remove unused pointer 'tree' in btrfs_submit_compressed_read
Pointer 'tree' is being assigned but is never used hence it is redundant
and can be removed. This is a leftover from cleanup patch
00032d38eaa89c76de7 ("btrfs: drop extent_io_ops::merge_bio_hook
callback").
Cleans up clang warning:
warning: variable 'tree' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Colin Ian King [Tue, 28 Aug 2018 10:45:21 +0000 (11:45 +0100)]
btrfs: remove unused pointer inode in relink_file_extents
Pointer inode is being assigned but is never used hence it is redundant
and can be removed. It's been unused since the introduction in
38c227d87c49a ("Btrfs: snapshot-aware defrag").
Cleans up clang warning:
variable ‘inode’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Su Yue [Wed, 5 Sep 2018 03:07:33 +0000 (11:07 +0800)]
btrfs: defrag: use btrfs_mod_outstanding_extents in cluster_pages_for_defrag
Since commit
8b62f87bad9c ("Btrfs: rework outstanding_extents"),
manual operations of outstanding_extent in btrfs_inode are replaced by
btrfs_mod_outstanding_extents().
The one in cluster_pages_for_defrag seems to be lost, so replace it
of btrfs_mod_outstanding_extents().
Fixes: 8b62f87bad9c ("Btrfs: rework outstanding_extents")
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 5 Sep 2018 01:55:27 +0000 (09:55 +0800)]
Btrfs: remove confusing tracepoint in btrfs_add_reserved_bytes
Here we're not releasing any space, but transferring bytes from
->bytes_may_use to ->bytes_reserved. The last change to the code in
commit
18513091af9483ba8 ("btrfs: update btrfs_space_info's
bytes_may_use timely") removed a conditional tracepoint and the logic
changed too but the tracepiont remained.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 23:36:17 +0000 (07:36 +0800)]
btrfs: free path at an earlier point in btrfs_get_extent
trace_btrfs_get_extent() has nothing to do with path, place
btrfs_free_path ahead so that we can unlock path on error.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 19:14:53 +0000 (03:14 +0800)]
Btrfs: use next_state in find_first_extent_bit
As next_state() is already defined to get the next state, use it in
find_first_extent_bit. No functional changes.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 21 Aug 2018 01:53:47 +0000 (09:53 +0800)]
btrfs: locking: Add extra check in btrfs_init_new_buffer() to avoid deadlock
[BUG]
For certain crafted image, whose csum root leaf has missing backref, if
we try to trigger write with data csum, it could cause deadlock with the
following kernel WARN_ON():
WARNING: CPU: 1 PID: 41 at fs/btrfs/locking.c:230 btrfs_tree_lock+0x3e2/0x400
CPU: 1 PID: 41 Comm: kworker/u4:1 Not tainted 4.18.0-rc1+ #8
Workqueue: btrfs-endio-write btrfs_endio_write_helper
RIP: 0010:btrfs_tree_lock+0x3e2/0x400
Call Trace:
btrfs_alloc_tree_block+0x39f/0x770
__btrfs_cow_block+0x285/0x9e0
btrfs_cow_block+0x191/0x2e0
btrfs_search_slot+0x492/0x1160
btrfs_lookup_csum+0xec/0x280
btrfs_csum_file_blocks+0x2be/0xa60
add_pending_csums+0xaf/0xf0
btrfs_finish_ordered_io+0x74b/0xc90
finish_ordered_fn+0x15/0x20
normal_work_helper+0xf6/0x500
btrfs_endio_write_helper+0x12/0x20
process_one_work+0x302/0x770
worker_thread+0x81/0x6d0
kthread+0x180/0x1d0
ret_from_fork+0x35/0x40
[CAUSE]
That crafted image has missing backref for csum tree root leaf. And
when we try to allocate new tree block, since there is no
EXTENT/METADATA_ITEM for csum tree root, btrfs consider it's free slot
and use it.
The extent tree of the image looks like:
Normal image | This fuzzed image
----------------------------------+--------------------------------
BG
29360128 | BG
29360128
One empty slot | One empty slot
29364224: backref to UUID tree |
29364224: backref to UUID tree
Two empty slots | Two empty slots
29376512: backref to CSUM tree | One empty slot (bad type) <<<
29380608: backref to D_RELOC tree |
29380608: backref to D_RELOC tree
... | ...
Since bytenr
29376512 has no METADATA/EXTENT_ITEM, when btrfs try to
alloc tree block, it's an valid slot for btrfs.
And for finish_ordered_write, when we need to insert csum, we try to CoW
csum tree root.
By accident, empty slots at bytenr BG_OFFSET, BG_OFFSET + 8K,
BG_OFFSET + 12K is already used by tree block COW for other trees, the
next empty slot is BG_OFFSET + 16K, which should be the backref for CSUM
tree.
But due to the bad type, btrfs can recognize it and still consider it as
an empty slot, and will try to use it for csum tree CoW.
Then in the following call trace, we will try to lock the new tree
block, which turns out to be the old csum tree root which is already
locked:
btrfs_search_slot() called on csum tree root, which is at
29376512
|- btrfs_cow_block()
|- btrfs_set_lock_block()
| |- Now locks tree block
29376512 (old csum tree root)
|- __btrfs_cow_block()
|- btrfs_alloc_tree_block()
|- btrfs_reserve_extent()
| Now it returns tree block
29376512, which extent tree
| shows its empty slot, but it's already hold by csum tree
|- btrfs_init_new_buffer()
|- btrfs_tree_lock()
| Triggers WARN_ON(eb->lock_owner == current->pid)
|- wait_event()
Wait lock owner to release the lock, but it's
locked by ourself, so it will deadlock
[FIX]
This patch will do the lock_owner and current->pid check at
btrfs_init_new_buffer().
So above deadlock can be avoided.
Since such problem can only happen in crafted image, we will still
trigger kernel warning for later aborted transaction, but with a little
more meaningful warning message.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200405
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 21 Aug 2018 01:42:03 +0000 (09:42 +0800)]
btrfs: Handle owner mismatch gracefully when walking up tree
[BUG]
When mounting certain crafted image, btrfs will trigger kernel BUG_ON()
when trying to recover balance:
kernel BUG at fs/btrfs/extent-tree.c:8956!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 662 Comm: mount Not tainted 4.18.0-rc1-custom+ #10
RIP: 0010:walk_up_proc+0x336/0x480 [btrfs]
RSP: 0018:
ffffb53540c9b890 EFLAGS:
00010202
Call Trace:
walk_up_tree+0x172/0x1f0 [btrfs]
btrfs_drop_snapshot+0x3a4/0x830 [btrfs]
merge_reloc_roots+0xe1/0x1d0 [btrfs]
btrfs_recover_relocation+0x3ea/0x420 [btrfs]
open_ctree+0x1af3/0x1dd0 [btrfs]
btrfs_mount_root+0x66b/0x740 [btrfs]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.9+0x54/0x140
btrfs_mount+0x16d/0x890 [btrfs]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.9+0x54/0x140
do_mount+0x1fd/0xda0
ksys_mount+0xba/0xd0
__x64_sys_mount+0x21/0x30
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[CAUSE]
Extent tree corruption. In this particular case, reloc tree root's
owner is DATA_RELOC_TREE (should be TREE_RELOC), thus its backref is
corrupted and we failed the owner check in walk_up_tree().
[FIX]
It's pretty hard to take care of every extent tree corruption, but at
least we can remove such BUG_ON() and exit more gracefully.
And since in this particular image, DATA_RELOC_TREE and TREE_RELOC share
the same root (which is obviously invalid), we needs to make
__del_reloc_root() more robust to detect such invalid sharing to avoid
possible NULL dereference as root->node can be NULL in this case.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200411
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
zhong jiang [Thu, 16 Aug 2018 16:37:15 +0000 (00:37 +0800)]
btrfs: change btrfs_pin_log_trans to return void
btrfs_pin_log_trans defines the variable "ret" for return value, but it
is not modified after initialization. Further, I find that none of the
callers do handles the return value, so it is safe to drop the unneeded
"ret" and make it return void.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
zhong jiang [Thu, 16 Aug 2018 16:37:14 +0000 (00:37 +0800)]
btrfs: change btrfs_free_reserved_bytes to return void
btrfs_free_reserved_bytes uses the variable "ret" for return value,
but it is not modified after initialzation. Further, I find that any of
the callers do not handle the return value, so it is safe to drop the
unneeded "ret" and return void. There are no callees that would need the
function to handle or pass the value either.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Thu, 16 Aug 2018 21:05:28 +0000 (05:05 +0800)]
Btrfs: remove always true if branch in btrfs_get_extent
@path is always NULL when it comes to the if branch.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 10 Aug 2018 02:20:26 +0000 (10:20 +0800)]
btrfs: qgroup: Dirty all qgroups before rescan
[BUG]
In the following case, rescan won't zero out the number of qgroup 1/0:
$ mkfs.btrfs -fq $DEV
$ mount $DEV /mnt
$ btrfs quota enable /mnt
$ btrfs qgroup create 1/0 /mnt
$ btrfs sub create /mnt/sub
$ btrfs qgroup assign 0/257 1/0 /mnt
$ dd if=/dev/urandom of=/mnt/sub/file bs=1k count=1000
$ btrfs sub snap /mnt/sub /mnt/snap
$ btrfs quota rescan -w /mnt
$ btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16.00KiB 16.00KiB none none --- ---
0/257 1016.00KiB 16.00KiB none none 1/0 ---
0/258 1016.00KiB 16.00KiB none none --- ---
1/0 1016.00KiB 16.00KiB none none --- 0/257
So far so good, but:
$ btrfs qgroup remove 0/257 1/0 /mnt
WARNING: quotas may be inconsistent, rescan needed
$ btrfs quota rescan -w /mnt
$ btrfs qgroup show -pcre /mnt
qgoupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16.00KiB 16.00KiB none none --- ---
0/257 1016.00KiB 16.00KiB none none --- ---
0/258 1016.00KiB 16.00KiB none none --- ---
1/0 1016.00KiB 16.00KiB none none --- ---
^^^^^^^^^^ ^^^^^^^^ not cleared
[CAUSE]
Before rescan we call qgroup_rescan_zero_tracking() to zero out all
qgroups' accounting numbers.
However we don't mark all qgroups dirty, but rely on rescan to do so.
If we have any high level qgroup without children, it won't be marked
dirty during rescan, since we cannot reach that qgroup.
This will cause QGROUP_INFO items of childless qgroups never get updated
in the quota tree, thus their numbers will stay the same in "btrfs
qgroup show" output.
[FIX]
Just mark all qgroups dirty in qgroup_rescan_zero_tracking(), so even if
we have childless qgroups, their QGROUP_INFO items will still get
updated during rescan.
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Tested-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 14 Aug 2018 18:09:52 +0000 (11:09 -0700)]
Btrfs: clean up scrub is_dev_replace parameter
struct scrub_ctx has an ->is_dev_replace member, so there's no point in
passing around is_dev_replace where sctx is available.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 10 Aug 2018 05:53:21 +0000 (13:53 +0800)]
btrfs: add helper to obtain number of devices with ongoing dev-replace
When the replace is running the fs_devices::num_devices also includes
the replaced device, however in some operations like device delete and
balance it needs the actual num_devices without the repalced devices.
The function btrfs_num_devices() just provides that.
And here is a scenario how balance and repalce items could co-exist:
Consider balance is started and paused, now start the replace followed
by a unmount or system power-cycle. During following mount, the
open_ctree() first restarts the balance so it must check for the device
replace otherwise our num_devices calculation will be wrong.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 10 Aug 2018 05:53:20 +0000 (13:53 +0800)]
btrfs: add assertions where number of devices could go below 0
In preparation to add helper function to deduce the num_devices with
replace running, use assert instead of BUG_ON or WARN_ON. The number of
devices would not normally drop to 0 due to other checks so the assert
is sufficient.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog, adjust the assert condition ]
Signed-off-by: David Sterba <dsterba@suse.com>
zhong jiang [Mon, 13 Aug 2018 06:06:08 +0000 (14:06 +0800)]
btrfs: remove unneeded NULL checks before kfree
Kfree has taken the NULL pointer into account. So remove the check
before kfree.
The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 14 Aug 2018 02:46:53 +0000 (10:46 +0800)]
Btrfs: do not unnecessarily pass write_lock_level when processing leaf
As we're going to return right after the call, it's not necessary to get
update the new write_lock_level from unlock_up.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Misono Tomohiro [Mon, 6 Aug 2018 05:25:24 +0000 (14:25 +0900)]
btrfs: Remove 'objectid' member from struct btrfs_root
There are two members in struct btrfs_root which indicate root's
objectid: objectid and root_key.objectid.
They are both set to the same value in __setup_root():
static void __setup_root(struct btrfs_root *root,
struct btrfs_fs_info *fs_info,
u64 objectid)
{
...
root->objectid = objectid;
...
root->root_key.objectid = objecitd;
...
}
and not changed to other value after initialization.
grep in btrfs directory shows both are used in many places:
$ grep -rI "root->root_key.objectid" | wc -l
133
$ grep -rI "root->objectid" | wc -l
55
(4.17, inc. some noise)
It is confusing to have two similar variable names and it seems
that there is no rule about which should be used in a certain case.
Since ->root_key itself is needed for tree reloc tree, let's remove
'objecitd' member and unify code to use ->root_key.objectid in all places.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:56 +0000 (21:10 +0800)]
btrfs: remove a useless return statement in btrfs_block_rsv_add
Since ret must be 0 here, don't have to return. No functional change
and code readability is not hurt.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:57 +0000 (21:10 +0800)]
btrfs: Remove root parameter from btrfs_insert_dir_item
All callers pass the root tree of dir, we can push that down to the
function itself.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:55 +0000 (21:10 +0800)]
btrfs: switch update_size to bool in btrfs_block_rsv_migrate and btrfs_rsv_add_bytes
Using true and false here is closer to the expected semantic than using
0 and 1. No functional change.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:53 +0000 (21:10 +0800)]
btrfs: simplify the send_in_progress check in btrfs_delete_subvolume
Only when send_in_progress, we have to do something different such as
btrfs_warn() and return -EPERM. Therefore, we could check
send_in_progress first and process error handling, after the
root_item_lock has been got.
Just for better readability. No functional change.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Greg Kroah-Hartman [Mon, 15 Oct 2018 05:20:24 +0000 (07:20 +0200)]
Linux 4.19-rc8
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:34:31 +0000 (08:34 +0200)]
Merge tag 'libnvdimm-fixes-4.19-rc8' of git://git./linux/kernel/git/nvdimm/nvdimm
Dan writes:
"libnvdimm/dax 4.19-rc8
* Fix a livelock in dax_layout_busy_page() present since v4.18. The
lockup triggers when truncating an actively mapped huge page out of
a mapping pinned for direct-I/O.
* Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5
mprotect() clears this flag that is needed to communicate the
liveness of device pages to the get_user_pages() path."
* tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm: Preserve _PAGE_DEVMAP across mprotect() calls
filesystem-dax: Fix dax_layout_busy_page() livelock
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:33:35 +0000 (08:33 +0200)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Wolfram writes:
"i2c fix for 4.19:
I2C has one documentation bugfix for something we changed during the
v4.19 cycle"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Fix kerneldoc for renamed i2c dma put function
Greg Kroah-Hartman [Sat, 13 Oct 2018 13:11:15 +0000 (15:11 +0200)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Paolo writes:
"KVM fixes for 4.19-rc8
Leftover bugfixes."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=m
ARM: KVM: Correctly order SGI register entries in the cp15 array
Vitaly Kuznetsov [Thu, 11 Oct 2018 10:03:12 +0000 (12:03 +0200)]
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
I'm observing random crashes in multi-vCPU L2 guests running on KVM on
Hyper-V. I bisected the issue to the commit
877ad952be3d ("KVM: vmx: Add
tlb_remote_flush callback support"). Hyper-V TLFS states:
"AddressSpace specifies an address space ID (an EPT PML4 table pointer)"
So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4
pointer should be used. Strip off EPT configuration information before
calling into vmx_hv_remote_flush_tlb().
Fixes: 877ad952be3d ("KVM: vmx: Add tlb_remote_flush callback support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Weinberger [Sat, 13 Oct 2018 08:18:41 +0000 (10:18 +0200)]
ubifs: Fix WARN_ON logic in exit path
ubifs_assert() is not WARN_ON(), so we have to invert
the checks.
Randy faced this warning with UBIFS being a module, since
most users use UBIFS as builtin because UBIFS is the rootfs
nobody noticed so far. :-(
Including me.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 54169ddd382d ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:31:19 +0000 (09:31 +0200)]
Merge branch 'akpm'
Fixes from Andrew:
* akpm:
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
ocfs2: fix a GCC warning
Khazhismel Kumykov [Sat, 13 Oct 2018 04:34:40 +0000 (21:34 -0700)]
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
On non-preempt kernels this loop can take a long time (more than 50 ticks)
processing through entries.
Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.com
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Glisse [Sat, 13 Oct 2018 04:34:36 +0000 (21:34 -0700)]
mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()
So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).
Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Sat, 13 Oct 2018 04:34:32 +0000 (21:34 -0700)]
mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an
application causes that application to randomly crash. The existing check
for handling MAP_FIXED_NOREPLACE looks up the first VMA that either
overlaps or follows the requested region, and then bails out if that VMA
overlaps *the start* of the requested region. It does not bail out if the
VMA only overlaps another part of the requested region.
Fix it by checking that the found VMA only starts at or after the end of
the requested region, in which case there is no overlap.
Test case:
user@debian:~$ cat mmap_fixed_simple.c
#include <sys/mman.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#ifndef MAP_FIXED_NOREPLACE
#define MAP_FIXED_NOREPLACE 0x100000
#endif
int main(void) {
char *p;
errno = 0;
p = mmap((void*)0x10001000, 0x4000, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p1=%p err=%m\n", p);
errno = 0;
p = mmap((void*)0x10000000, 0x2000, PROT_READ,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p2=%p err=%m\n", p);
char cmd[100];
sprintf(cmd, "cat /proc/%d/maps", getpid());
system(cmd);
return 0;
}
user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c
user@debian:~$ ./mmap_fixed_simple
p1=0x10001000 err=Success
p2=0x10000000 err=Success
10000000-
10002000 r--p
00000000 00:00 0
10002000-
10005000 ---p
00000000 00:00 0
564a9a06f000-
564a9a070000 r-xp
00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a26f000-
564a9a270000 r--p
00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a270000-
564a9a271000 rw-p
00001000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a54a000-
564a9a56b000 rw-p
00000000 00:00 0 [heap]
7f8eba447000-
7f8eba5dc000 r-xp
00000000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba5dc000-
7f8eba7dc000 ---p
00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7dc000-
7f8eba7e0000 r--p
00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e0000-
7f8eba7e2000 rw-p
00199000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e2000-
7f8eba7e6000 rw-p
00000000 00:00 0
7f8eba7e6000-
7f8eba809000 r-xp
00000000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8eba9e9000-
7f8eba9eb000 rw-p
00000000 00:00 0
7f8ebaa06000-
7f8ebaa09000 rw-p
00000000 00:00 0
7f8ebaa09000-
7f8ebaa0a000 r--p
00023000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0a000-
7f8ebaa0b000 rw-p
00024000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0b000-
7f8ebaa0c000 rw-p
00000000 00:00 0
7ffcc99fa000-
7ffcc9a1b000 rw-p
00000000 00:00 0 [stack]
7ffcc9b44000-
7ffcc9b47000 r--p
00000000 00:00 0 [vvar]
7ffcc9b47000-
7ffcc9b49000 r-xp
00000000 00:00 0 [vdso]
ffffffffff600000-
ffffffffff601000 r-xp
00000000 00:00 0
[vsyscall]
user@debian:~$ uname -a
Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux
user@debian:~$
As you can see, the first page of the mapping at 0x10001000 was clobbered.
Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com
Fixes: a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE")
Signed-off-by: Jann Horn <jannh@google.com>
Reported-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhong jiang [Sat, 13 Oct 2018 04:34:26 +0000 (21:34 -0700)]
ocfs2: fix a GCC warning
Fix the following compile warning:
fs/ocfs2/dlmglue.c:99:30: warning:
\91lockdep_keys
\92 defined but not used [-Wunused-variable]
static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES];
Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:07:23 +0000 (09:07 +0200)]
Merge tag 'for-linus-
20181012' of git://git.kernel.dk/linux-block
Jens writes:
"block fix for 4.19-rc
Just a single fix that should go in, fixing a regression introduced
in the blk-wbt code."
* tag 'for-linus-
20181012' of git://git.kernel.dk/linux-block:
blk-wbt: wake up all when we scale up, not down
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:06:27 +0000 (09:06 +0200)]
Merge tag 'gfs2-4.19.fixes3' of git://git./linux/kernel/git/gfs2/linux-gfs2
Andreas writes:
"gfs2 4.19 fixes
Fix iomap buffered write support for journaled files"
* tag 'gfs2-4.19.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix iomap buffered write support for journaled files (2)
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:05:37 +0000 (09:05 +0200)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Will writes:
"More arm64 fixes
- Reject CHAIN PMU events when they are not part of a 64-bit counter
- Fix WARN_ON_ONCE() that triggers for reserved regions that don't
correspond to mapped memory"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: Reject stand-alone CHAIN events for PMUv3
arm64: Fix /proc/iomem for reserved but not memory regions
projects / openwrt / staging / blogic.git / log