drm/i915: Simplify error handling in intel_modeset_all_pipes()

No need for the extra break statements and whatnot, just return the
error directly. And tighten the scope of the local variables while at
it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Protect dev_priv->atomic_cdclk_freq with all the crtc locks

A modeset on one pipe can update dev_priv->atomic_cdclk_freq without
actually touching the hardware, in which case we won't force a modeset
on all the pipes, and thus won't lock any of the other pipes either.
That means a parallel plane update on another pipe could be looking at
a stale dev_priv->atomic_cdcdlk_freq and thus fail to notice when the
plane configuration is invalid, or potentially reject a valid update.

To overcome this we must protect writes to atomic_cdclk_freq with
all the crtc locks, and thus for reads any single crtc lock will
be sufficient protection.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things

When we end up not recomputing the cdclk, we need to populate
intel_state->cdclk with the "atomic_cdclk_freq" instead of the
current cdclk_freq. When no pipes are active, the actual cdclk_freq
may be lower than what the configuration of the planes and
pipes would require from the point of view of the software state.

This fixes bogus WARNS from skl_max_scale() which is trying to check
the plane software state against the cdclk frequency. So any time
it got called during DPMS off for instance, we might have tripped
the warn if the current mode would have required a higher than
minimum cdclk.

v2: Drop the dev_cdclk stuff (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: bruno.pagani@ens-lyon.org
Cc: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Joseph Yasi <joe.yasi@gmail.com> (v1)
Cc: stable@vger.kernel.org
Fixes: 1a617b77658e ("drm/i915: Keep track of the cdclk as if all crtc's were active.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98214
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-2-git-send-email-ville.syrjala@linux.intel.com

drm/i915/bxt: Correct dual-link MIPI port control.

For BXT, there is only one bit that enables/disables dual-link mode
and not different bits depending on which pipe is being used.

Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479767046-3964-1-git-send-email-bob.j.paauwe@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Use enum plane_id in VLV/CHV wm code

Let's try not to abuse plane->plane for sprites on VLV/CHV and instead
use plane->id. Since out watermark structures aren't entirely plane type
agnostic (for now) and start indexing sprites from 0  we'll add a small
helper to convert between the two bases.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-7-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Use enum plane_id in VLV/CHV sprite code

Use intel_plane->id to derive the VLV/CHV sprite register offsets
instead of abusing plane->plane which is really meant to for
primary planes only.

v2: Convert assert_sprites_disabled() over as well
v3: Rename the reg macro parameter to 'plane_id' as well (Paulo)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-6-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Use enum plane_id in SKL plane code

Replace the intel_plane->plane and hardcoded 0 usage in the SKL plane
code with intel_plane->id.

This should make the SKL "primary" and "sprite" code virtually
identical, so the next logical step would likely be dropping one
of the copies.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-5-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Use enum plane_id in SKL wm code

Nuke skl_wm_plane_id() and just use the new intel_plane->id.

v2: Convert skl_write_plane_wm() as well
v3: Convert skl_pipe_wm_get_hw_state() correctly
v4: Rebase due to changes in the wm code
    Drop the cursor FIXME from the total data rate calc (Paulo)
    Use the "[PLANE:%d:%s]" format in debug print (Paulo)

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude <cpaul@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Lyude <lyude@redhat.com>

drm/i915: Add crtc->plane_ids_mask

Add a mask of which planes are available for each pipe. This doesn't
quite work for old platforms with dynamic plane<->pipe assignment, but
as we don't support that sort of stuff (yet) we can get away with it.

The main use I have for this is the for_each_plane_id_on_crtc() macro
for iterating over all possible planes on the crtc. I suppose we could
not add the mask, and instead iterate by comparing intel_plane->pipe
but then we'd need a local intel_plane variable which is just
unnecessary clutter in some cases. But I'm not hung up on this, so if
people prefer the other option I could be convinced to use it.

v2: Use BIT() in the iterator macro too (Paulo)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-3-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Add per-pipe plane identifier

As I told people in [1] we really should not be confusing enum plane
as a per-pipe plane identifier. Looks like that happened nonetheless, so
let's fix it up by splitting the two into two enums.

We'll also want something we just directly pass to various register
offset macros and whatnot on SKL+. So let's make this new thing work for that.
Currently we pass intel_plane->plane for the "sprites" and just a
hardcoded zero for the "primary" planes. We want to get rid of that
hardocoding so that we can share the same code for all planes (apart
from the legacy cursor of course).

[1] https://lists.freedesktop.org/archives/intel-gfx/2015-September/076082.html

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-2-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Make skl_write_{plane,cursor}_wm() static

Someone forgot to make skl_write_{plane,cursor}_wm() static when
removing the prototypes from the header. Sparse isn't pleased.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: e62929b3f628 ("drm/i915/gen9+: Program watermarks as a separate step during evasion, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479846113-24745-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Lyude <lyude@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: i915_gem_alloc_context_obj can be static

It has only one call site from the same file.

v2: Also rename it to alloc_context_obj. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479898155-21014-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915/guc: Remove unused intel_guc_fw struct member

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479896421-20611-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915/lspcon: Remove unused force change mode parameter

All callers asked for a forced change but the function ignored this
parameter. It doesn't seem to be necessary to force the change in any
case so let's just remove the parameter.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-5-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Wait for expected LSPCON mode to settle

Some LSPCON adaptors may return an incorrect LSPCON mode right after
waking from DP Sleep state. This is the case at least for the ParadTech
PS175 adaptor, both when waking because of exiting the DP Sleep to
active state, or due to any other AUX CH transfer. We can determine the
current expected mode based on whether the DPCD area is accessible,
since according to the LSPCON spec this area is only accesible
in PCON mode.

This wait will avoid us trying to change the mode, while the current
expected mode hasn't settled yet and start link training before the
adaptor thinks it's in PCON mode after waking from DP Sleep state.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-4-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Add dp_to_lspcon helper()

We need to get to LSPCON in the next patch, so factor out the helper for
it. While at it also remove the redundant GEN9 check.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-3-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Ensure AUX CH is awake while in DP Sleep state

Some LSPCON adaptors won't properly wake up in response to an AUX
request after the adaptor was placed to a DP Sink Sleep state (via
writing 0x2 to DP_SET_POWER). Based on the DP 1.4 specification 5.2.5,
the sink may place the AUX CH into a low-power state while in Sleep
state, but should wake it up in response to an AUX request within 1-20ms
(answering with AUX defers while waking it up). As opposed to this at
least the ParadTech PS175 adaptor won't fully wake in response to the
first I2C-over-AUX access and will occasionally ignore the offset in I2C
messages. This can result in accessing the DDC register at offset 0
regardless of the specified offset and the LSPCON detection failing.

To fix this do an initial dummy read from the DPCD area. The PS175 will
defer this access until it's fully woken (taking ~150ms) making sure the
following I2C-over-AUX accesses will work correctly.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=98353
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-2-git-send-email-imre.deak@intel.com

drm/i915: Stop the machine as we install the wedged submit_request handler

In order to prevent a race between the old callback submitting an
incomplete request and i915_gem_set_wedged() installing its nop handler,
we must ensure that the swap occurs when the machine is idle
(stop_machine).

v2: move context lost from out of BKL.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-4-chris@chris-wilson.co.uk

drm/i915: Complete requests in nop_submit_request

Since the submit/execute split in commit d55ac5bf97c6 ("drm/i915: Defer
transfer onto execution timeline to actual hw submission") the
global seqno advance was deferred until the submit_request callback.
After wedging the GPU, we were installing a nop_submit_request handler
(to avoid waking up the dead hw) but I had missed converting this over
to the new scheme. Under the new scheme, we have to explicitly call
i915_gem_submit_request() from the submit_request handler to mark the
request as on the hardware. If we don't the request is always pending,
and any waiter will continue to wait indefinitely and hangcheck will not
be able to resolve the lockup.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98748
Testcase: igt/gem_eio/in-flight
Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-3-chris@chris-wilson.co.uk

drm/i915: Disable hangcheck when wedged

If the gpu reset fails and the machine is terminally wedged, further
hangchecks achieve nothing but noise. Disable them, with a corollary
that we re-enable hangchecking after a successful GPU reset in case the
user is artificially bringing the machine back to life through the debug
interface.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-2-chris@chris-wilson.co.uk

drm/i915: Don't deref context->file_priv ERR_PTR upon reset

When a user context is closed, it's file_priv backpointer is replaced by
ERR_PTR(-EBADF); be careful not to chase this invalid pointer after a
hang and a GPU reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b083a0870c79 ("drm/i915: Add per client max context ban limit")
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-1-chris@chris-wilson.co.uk

drm/i915: Add a kerneldoc summary for i915_perf.c

In particular this tries to capture for posterity some of the early
challenges we had with using the core perf infrastructure in case we
ever want to revisit adapting perf for device metrics.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-12-robert@sixbynine.org

drm/i915: Add more Haswell OA metric sets

This adds 'compute', 'compute extended', 'memory reads', 'memory writes'
and 'sampler balance' metric sets for Haswell.

The code is auto generated from an XML description of metric sets,
currently maintained in gputop, ref:

 https://github.com/rib/gputop
 > gputop-data/oa-*.xml
 > scripts/i915-perf-kernelgen.py

 $ make -C gputop-data -f Makefile.xml

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-11-robert@sixbynine.org

drm/i915: add dev.i915.oa_max_sample_rate sysctl

The maximum OA sampling frequency is now configurable via a
dev.i915.oa_max_sample_rate sysctl parameter.

Following the precedent set by perf's similar
kernel.perf_event_max_sample_rate the default maximum rate is 100000Hz

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-10-robert@sixbynine.org

drm/i915: Add dev.i915.perf_stream_paranoid sysctl option

Consistent with the kernel.perf_event_paranoid sysctl option that can
allow non-root users to access system wide cpu metrics, this can
optionally allow non-root users to access system wide OA counter metrics
from Gen graphics hardware.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-9-robert@sixbynine.org

drm/i915: advertise available metrics via sysfs

Each metric set is given a sysfs entry like:

/sys/class/drm/card0/metrics/<guid>/id

This allows userspace to enumerate the specific sets that are available
for the current system. The 'id' file contains an unsigned integer that
can be used to open the associated metric set via
DRM_IOCTL_I915_PERF_OPEN. The <guid> is a globally unique ID for a
specific OA unit register configuration that can be reliably used by
userspace as a key to lookup corresponding counter meta data and
normalization equations.

The guid registry is currently maintained as part of gputop along with
the XML metric set descriptions and code generation scripts, ref:

 https://github.com/rib/gputop
 > gputop-data/guids.xml
 > scripts/update-guids.py
 > gputop-data/oa-*.xml
 > scripts/i915-perf-kernelgen.py

 $ make -C gputop-data -f Makefile.xml SYSFS=1 WHITELIST=RenderBasic

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-8-robert@sixbynine.org

drm/i915: Enable i915 perf stream for Haswell OA unit

Gen graphics hardware can be set up to periodically write snapshots of
performance counters into a circular buffer via its Observation
Architecture and this patch exposes that capability to userspace via the
i915 perf interface.

v2:
   Make sure to initialize ->specific_ctx_id when opening, without
   relying on _pin_notify hook, in case ctx already pinned.
v3:
   Revert back to pinning ctx upfront when opening stream, removing
   need to hook in to pinning and to update OACONTROL on the fly.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-7-robert@sixbynine.org

drm/i915: Add 'render basic' Haswell OA unit config

Adds a static OA unit, MUX + B Counter configuration for basic render
metrics on Haswell. This is auto generated from an XML
description of metric sets, currently maintained in gputop, ref:

  https://github.com/rib/gputop
  > gputop-data/oa-*.xml
  > scripts/i915-perf-kernelgen.py

  $ make -C gputop-data -f Makefile.xml SYSFS=0 WHITELIST=RenderBasic

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-6-robert@sixbynine.org

drm/i915: don't whitelist oacontrol in cmd parser

Being able to program OACONTROL from a non-privileged batch buffer is
not sufficient to be able to configure the OA unit. This was originally
allowed to help enable Mesa to expose OA counters via the
INTEL_performance_query extension, but the current implementation based
on programming OACONTROL via a batch buffer isn't able to report useable
data without a more complete OA unit configuration. Mesa handles the
possibility that writes to OACONTROL may not be allowed and so only
advertises the extension after explicitly testing that a write to
OACONTROL succeeds. Based on this; removing OACONTROL from the whitelist
should be ok for userspace.

Removing this simplifies adding a new kernel api for configuring the OA
unit without needing to consider the possibility that userspace might
trample on OACONTROL state which we'd like to start managing within
the kernel instead. In particular running any Mesa based GL application
currently results in clearing OACONTROL when initializing which would
disable the capturing of metrics.

v2:
    This bumps the command parser version from 8 to 9, as the change is
    visible to userspace.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108125148.25007-1-robert@sixbynine.org

drm/i915: return EACCES for check_cmd() failures

check_cmd() is checking whether a command adheres to certain
restrictions that ensure it's safe to execute within a privileged batch
buffer. Returning false implies a privilege problem, not that the
command is invalid.

The distinction makes the difference between allowing the buffer to be
executed as an unprivileged batch buffer or returning an EINVAL error to
userspace without executing anything.

In a case where userspace may want to test whether it can successfully
write to a register that needs privileges the distinction may be
important and an EINVAL error may be considered fatal.

In particular this is currently true for Mesa, which includes a test for
whether OACONTROL can be written too, but Mesa treats any error when
flushing a batch buffer as fatal, calling exit(1).

As it is currently Mesa can gracefully handle a failure to write to
OACONTROL if the command parser is disabled, but if we were to remove
OACONTROL from the parser's whitelist then the returned EINVAL would
break Mesa applications as they attempt an OACONTROL write.

This bumps the command parser version from 7 to 8, as the change is
visible to userspace.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-4-robert@sixbynine.org

drm/i915: rename OACONTROL GEN7_OACONTROL

OACONTROL changes quite a bit for gen8, with some bits split out into a
per-context OACTXCONTROL register. Rename now before adding more gen7 OA
registers

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-3-robert@sixbynine.org

drm/i915: Add i915 perf infrastructure

Adds base i915 perf infrastructure for Gen performance metrics.

This adds a DRM_IOCTL_I915_PERF_OPEN ioctl that takes an array of uint64
properties to configure a stream of metrics and returns a new fd usable
with standard VFS system calls including read() to read typed and sized
records; ioctl() to enable or disable capture and poll() to wait for
data.

A stream is opened something like:

  uint64_t properties[] = {
      /* Single context sampling */
      DRM_I915_PERF_PROP_CTX_HANDLE,        ctx_handle,

      /* Include OA reports in samples */
      DRM_I915_PERF_PROP_SAMPLE_OA,         true,

      /* OA unit configuration */
      DRM_I915_PERF_PROP_OA_METRICS_SET,    metrics_set_id,
      DRM_I915_PERF_PROP_OA_FORMAT,         report_format,
      DRM_I915_PERF_PROP_OA_EXPONENT,       period_exponent,
   };
   struct drm_i915_perf_open_param parm = {
      .flags = I915_PERF_FLAG_FD_CLOEXEC |
               I915_PERF_FLAG_FD_NONBLOCK |
               I915_PERF_FLAG_DISABLED,
      .properties_ptr = (uint64_t)properties,
      .num_properties = sizeof(properties) / 16,
   };
   int fd = drmIoctl(drm_fd, DRM_IOCTL_I915_PERF_OPEN, &param);

Records read all start with a common { type, size } header with
DRM_I915_PERF_RECORD_SAMPLE being of most interest. Sample records
contain an extensible number of fields and it's the
DRM_I915_PERF_PROP_SAMPLE_xyz properties given when opening that
determine what's included in every sample.

No specific streams are supported yet so any attempt to open a stream
will return an error.

v2:
    use i915_gem_context_get() - Chris Wilson
v3:
    update read() interface to avoid passing state struct - Chris Wilson
    fix some rebase fallout, with i915-perf init/deinit
v4:
    s/DRM_IORW/DRM_IOW/ - Emil Velikov

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-2-robert@sixbynine.org

drm/i915: Wipe hang stats as an embedded struct

Bannable property, banned status, guilty and active counts are
properties of i915_gem_context. Make them so.

v2: rebase

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479309634-28574-1-git-send-email-mika.kuoppala@intel.com

drm/i915: Add per client max context ban limit

If we have a bad client submitting unfavourably across different
contexts, creating new ones, the per context scoring of badness
doesn't remove the root cause, the offending client.
To counter, keep track of per client context bans. Deny access if
client is responsible for more than 3 context bans in
it's lifetime.

v2: move ban check to context create ioctl (Chris)
v3: add commentary about hangs needed to reach client ban (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Add bannable context parameter

Now when driver has per context scoring of 'hanging badness'
and also subsequent hangs during short windows are allowed,
if there is progress made in between, it does not make sense
to expose a ban timing window as a context parameter anymore.

Let the scoring be the sole indicator for ban policy and substitute
ban period context parameter as a boolean to get/set context
bannable property.

v2: allow non root to opt into being banned (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Use request retirement as context progress

As hangcheck score was removed, the active decay of score
was removed also. This removed feature for hangcheck to detect
if the gpu client was accidentally or maliciously causing intermittent
hangs. Reinstate the scoring as a per context property, so that if
one context starts to act unfavourably, ban it.

v2: ban_period_secs as a gate to score check (Chris)
v3: decay in proper spot. scores as tunables (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Decouple hang detection from hangcheck period

Hangcheck state accumulation has gained more steps
along the years, like head movement and more recently the
subunit inactivity check. As the subunit sampling is only
done if the previous state check showed inactivity, we
have added more stages (and time) to reach a hang verdict.

Asymmetric engine states led to different actual weight of
'one hangcheck unit' and it was demonstrated in some
hangs that due to difference in stages, simpler engines
were accused falsely of a hang as their scoring was much
more quicker to accumulate above the hang treshold.

To completely decouple the hangcheck guilty score
from the hangcheck period, convert hangcheck score to a
rough period of inactivity measurement. As these are
tracked as jiffies, they are meaningful also across
reset boundaries. This makes finding a guilty engine
more accurate across multi engine activity scenarios,
especially across asymmetric engines.

We lose the ability to detect cross batch malicious attempts
to hinder the progress. Plan is to move this functionality
to be part of context banning which is more natural fit,
later in the series.

v2: use time_before macros (Chris)
    reinstate the pardoning of moving engine after hc (Chris)
v3: avoid global state for per engine stall detection (Chris)
v4: take timeline last retirement into account (Chris)
v5: do debug print on pardoning, split out retirement timestamp (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Split up hangcheck phases

In order to simplify hangcheck state keeping, split hangcheck
per engine loop in three phases: state load, action, state save.

Add few more hangcheck actions to separate between seqno, head
and subunit movements. This helps to gather all the hangcheck
actions under a single switch umbrella.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Add more keywords to firmware loading message

To find out what firmware we actually loaded (from dmesg) the explicit
'dmc' and 'firmware' are missing from the info printout. Add them.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479288806-17355-1-git-send-email-mika.kuoppala@intel.com

drm/i915: Use num_scalers instead of SKL_NUM_SCALERS in debugfs

Better to use num_scaler itself while printing scaler_info.
This fixes a bug of printing information for the missing
second scaler on pipe C for SKL platform.

Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479664226-22307-1-git-send-email-sunil.kamath@intel.com

drm/i915: Add a warning on shutdown if signal threads still active

When unloading the module, it is expected that we have finished
executing all requests and so the signal threads should be idle. Add a
warning in case there are any residual requests in the signaler rbtrees
at that point.

v2: We can also warn if there are any waiters

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161121110759.22896-1-chris@chris-wilson.co.uk

drm/i915: Use user, not driver, DRM_DEBUG for 2 context ioctls

For user actions, such as the context ioctls, we prefer to use DRM_DEBUG
rather than DRM_DEBUG_DRIVER as currently used.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161121113109.1976-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20161121

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Skip final clflush if LLC is coherent

If the LLC is coherent with the object, we do not need to worry about
whether main memory and cache mismatch when we hand the object back to
the system.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161118211747.25197-2-chris@chris-wilson.co.uk

drm/i915: Always flush the dirty CPU cache when pinning the scanout

Currently we only clflush the scanout if it is in the CPU domain. Also
flush if we have a pending CPU clflush. We also want to treat the
dirtyfb path similar, and flush any pending writes there as well.

v2: Only send the fb flush message if flushing the dirt on flip
v3: Make flush-for-flip and dirtyfb look more alike since they serve
similar roles as end-of-frame marker.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: http://patchwork.freedesktop.org/patch/msgid/20161118211747.25197-1-chris@chris-wilson.co.uk

drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error

On the DMA mapping error path, sg may be NULL (it has already been
marked as the last scatterlist entry), and we should avoid dereferencing
it again.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e227330223a7 ("drm/i915: avoid leaking DMA mappings")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20161114112930.2033-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Check that each request phase is completed before retiring

Trying to chase an impossible bug (ivb):

[  207.765411] [drm:i915_reset_and_wakeup [i915]] resetting chip
[  207.765734] [drm:i915_gem_reset [i915]] resetting render ring to restart from tail of request 0x4ee834
[  207.765791] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on RC6p on RC6pp off
[  207.767213] [drm:intel_guc_setup [i915]] GuC fw status: path (null), fetch NONE, load NONE
[  207.767515] kernel BUG at drivers/gpu/drm/i915/i915_gem_request.c:203!
[  207.767551] invalid opcode: 0000 [#1] PREEMPT SMP
[  207.767576] Modules linked in: snd_hda_intel i915 cdc_ncm usbnet mii x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me mei snd_pcm sdhci_pci sdhci mmc_core e1000e ptp pps_core [last unloaded: i915]
[  207.767808] CPU: 3 PID: 8855 Comm: gem_ringfill Tainted: G     U          4.9.0-rc5-CI-Patchwork_3052+ #1
[  207.767854] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012
[  207.767894] task: ffff88012c82a740 task.stack: ffffc9000383c000
[  207.767927] RIP: 0010:[<ffffffffa00a0a3a>]  [<ffffffffa00a0a3a>] i915_gem_request_retire+0x2a/0x4b0 [i915]
[  207.767999] RSP: 0018:ffffc9000383fb20  EFLAGS: 00010293
[  207.768027] RAX: 00000000004ee83c RBX: ffff880135dcb480 RCX: 00000000004ee83a
[  207.768062] RDX: ffff88012fea42a8 RSI: 0000000000000001 RDI: ffff88012c82af68
[  207.768095] RBP: ffffc9000383fb48 R08: 0000000000000000 R09: 0000000000000000
[  207.768129] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880135dcb480
[  207.768163] R13: ffff88012fea42a8 R14: 0000000000000000 R15: 00000000000001d8
[  207.768200] FS:  00007f955f658740(0000) GS:ffff88013e2c0000(0000) knlGS:0000000000000000
[  207.768239] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  207.768258] CR2: 0000555899725930 CR3: 00000001316f6000 CR4: 00000000001406e0
[  207.768286] Stack:
[  207.768299]  ffff880135dcb480 ffff880135dcbe00 ffff88012fea42a8 0000000000000000
[  207.768350]  00000000000001d8 ffffc9000383fb70 ffffffffa00a1339 0000000000000000
[  207.768402]  ffff88012f296c88 00000000000003f0 ffffc9000383fbb0 ffffffffa00b582d
[  207.768453] Call Trace:
[  207.768493]  [<ffffffffa00a1339>] i915_gem_request_retire_upto+0x49/0x90 [i915]
[  207.768553]  [<ffffffffa00b582d>] intel_ring_begin+0x15d/0x2d0 [i915]
[  207.768608]  [<ffffffffa00b59cb>] intel_ring_alloc_request_extras+0x2b/0x40 [i915]
[  207.768667]  [<ffffffffa00a2fd9>] i915_gem_request_alloc+0x359/0x440 [i915]
[  207.768723]  [<ffffffffa008bd03>] i915_gem_do_execbuffer.isra.15+0x783/0x1a10 [i915]
[  207.768766]  [<ffffffff811a6a2e>] ? __might_fault+0x3e/0x90
[  207.768816]  [<ffffffffa008d380>] i915_gem_execbuffer2+0xc0/0x250 [i915]
[  207.768854]  [<ffffffff815532a6>] drm_ioctl+0x1f6/0x480
[  207.768900]  [<ffffffffa008d2c0>] ? i915_gem_execbuffer+0x330/0x330 [i915]
[  207.768939]  [<ffffffff81202f6e>] do_vfs_ioctl+0x8e/0x690
[  207.768972]  [<ffffffff818193ac>] ? retint_kernel+0x2d/0x2d
[  207.769004]  [<ffffffff810d6ef2>] ? trace_hardirqs_on_caller+0x122/0x1b0
[  207.769039]  [<ffffffff812035ac>] SyS_ioctl+0x3c/0x70
[  207.769068]  [<ffffffff818189ae>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[  207.769103] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fc 53 8b 35 fa 7b e1 e1 85 f6 0f 85 55 03 00 00 41 8b 84 24 80 02 00 00 85 c0 75 02 <0f> 0b 49 8b 94 24 a8 00 00 00 48 8b 8a e0 01 00 00 8b 89 c0 00
[  207.769400] RIP  [<ffffffffa00a0a3a>] i915_gem_request_retire+0x2a/0x4b0 [i915]
[  207.769463]  RSP <ffffc9000383fb20>

Let's add a couple more BUG_ONs before this to ascertain that the request
did make it to hardware. The impossible part of this stacktrace is that
request must have been considered completed by the i915_request_wait()
before we tried to retire it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161118143412.26508-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: i915_pages_create_for_stolen should return err ptr

When gathering the pages from our backing storage we expect get_pages()
to either give us our sg_table or an err ptr. However when gathering our
fake pages for stolen memory we may return NULL in the event of a
failure. To prevent any funny business we should therefore return the
proper err ptr value.

Fixes: 03ac84f1830e ("drm/i915: Pass around sg_table to get_pages/put_pages backend")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479488536-6168-1-git-send-email-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Enable support for nonblocking modeset

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-12-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #irc

drm/i915: Be more careful to drop the GT wakeref

Since we can retire requests from multiple paths, we cannot assume that
i915_gem_retire_requests() is the sole path on which we can transition
to gt.active_requests == 0. A consequence of this is that we would skip
the function if we had already retired all the requests and not
scheduled the idle worker.

This is fallout from changing the routine from considering active_engines
(for which it was the only consumer) to active_requests.

v2: Move kicking the idle working to i915_gem_request_retire() otherwise
we could postpone the idle callback everytime we called retire_requests
even though we did no work.
v3: We only need to move the idle work kicking!
v4: Drop the BUG_ON(!awake) as we may be called from the shrinker in the
middle of constructing a request before we have marked the device awake.
v5: Add a BUG_ON() for active_requests underflow upon retirement (Joonas)

Fixes: 28176ef4cfa5 ("drm/i915: Reserve space in the global seqno during request allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115164620.17185-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Move frontbuffer CS write tracking from ggtt vma to object

I tried to avoid having to track the write for every VMA by only
tracking writes to the ggtt. However, for the purposes of frontbuffer
tracking this is insufficient as we need to invalidate around writes not
just to the the ggtt but all aliased ppgtt views of the framebuffer. By
moving the critical section to the object and only doing so for
framebuffer writes we can reduce the tracking even further by only
watching framebuffers and not vma.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161116190704.5293-1-chris@chris-wilson.co.uk
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Only dump dp_m2_n2 configuration when drrs is used

Otherwise it is just an useless empty line.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479397449-27085-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: don't leak global_timeline

We need to clean up the global_timeline in i915_gem_load_cleanup.

v2: don't forget about the struct_mutex, and also WARN_ON if we have any
remaining timelines before purging the global_timeline.

v3: it might be a good idea to first remove the global_timeline...duh!

Fixes: 73cb97010d4f ("drm/i915: Combine seqno + tracking into a global timeline struct")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479415087-13216-1-git-send-email-matthew.auld@intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/20161117210411.14044-2-chris@chris-wilson.co.uk

drm/i915: add i915_address_space_fini

We already have an i915_address_space_init, so for symmetry we should
also have a _fini, plus we already open code it twice. This then also
fixes a bug where we leak the timeline for the ggtt vm.

v2: don't forget about the struct_mutex for the ggtt path.

Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161117210411.14044-1-chris@chris-wilson.co.uk

drm/i915: Add a few more sanity checks for stolen handling

We should never be called via obj->ops->release() on anything other than
a fully formed stolen object, so raise that to an assert. In the process
tidy up a comment and variable no longer used outside of a conditional
BUG.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161117155846.4631-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Waterproof verification of gen9 forcewake table ranges

We have to make sure there are no holes in the table in Gen9.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479388435-12062-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Introduce enableddisabled helper

Similar to existing yesno and onoff and use it throughout the code.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479385814-2358-2-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Only dump possible panel fitter config for the platform

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Only dump scaler config where supported

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Compact a few pipe config debug lines

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Don't log pipe config kernel pointer and duplicated pipe name

Kernel pointer does not sound like an useful thing to log and
pipe name is already contained in the crtc name.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Dump FDI config only where applicable

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Extract intel_link_m_n config printing into a helper

And also only dump DP config for crtcs with DP encoders.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove stolen object spam

We don't spam the debug when we create a normal object, nor when we
allocate their pages. Yet we do for stolen objects, and since these are
quite frequently used (at least once per context), the resulting spam
floods the dmesg in CI.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Demote i915_gem_open() debugging from DRIVER to USER

We use DRM_DEBUG() when reporting on user actions, to try and keep
intentional errors out of the CI dmesg. Demote the debug from
i915_gem_open() similarly so that it is only apparent with drm.debug & 1
like its brethren.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161109104507.21228-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Make scaler updates less chatty

It looks to me skl_update_scaler will already log interesting
debug messages when the state transitions or there is an error.

In this case it feels we can remove the two unconditional
debug messages which happen immediately before calling
skl_update_scaler. This way we get rid of the sole debug
message when switching virtual terminals for example.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479376805-5087-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Remove __I915__ magic macro

And at the same time introduce a static inline helper for
more type safety.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479286545-15020-2-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Fix for_each_pipe argument in vlv_display_power_well_init

Macro takes dev_priv and not dev.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in intel_display.c

v2: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in intel_pm.c

Plus a trickle of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in intel_dp.c

And as usual a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Assorted INTEL_INFO(dev) cleanups

A bunch of source files with just a few instances of the
incorrect INTEL_INFO use.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_suspend.c

And a little bit of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_irq.c

And a little bit of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gpu_error.c

And a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gem_tiling.c

And a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gem_stolen.c

And a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gem_gtt.c

Started with removing INTEL_INFO(dev) and cascaded into a quite
big trickle of function prototype changes. Still, I think it is
for the better.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use dev_priv in INTEL_INFO in i915_gem_fence_reg.c

Plus a small cascade of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use dev_priv in INTEL_INFO in i915_gem_execbuffer.c

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv and a small cascade of cleanups in i915_gem.c

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Merge tag 'gvt-next-2016-11-17' of https://github.com/01org/gvt-linux into drm-intel-next-queued

From Zhenyu Wang:

gvt-next-2016-11-17

- Fix lock order issue found in guest stress test
- Fix several MMIO handlers to correct behavior
- Fix crash for vgpu execlist reset and memleak
- Fix a possible conflict for unresolved vfio mdev dependency
- other misc fixes

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Tvrtko needs

commit b3c11ac267d461d3d597967164ff7278a919a39f
Author: Eric Engestrom <eric@engestrom.ch>
Date:   Sat Nov 12 01:12:56 2016 +0000

    drm: move allocation out of drm_get_format_name()

to be able to apply his patches without conflicts.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915: Fix gen9 forcewake range table

Commit 0dd356bb6ff5 ("drm/i915: Eliminate Gen9 special case")
accidentaly dropped a MMIO range between 0xc000 to 0xcfff out
of the blitter forcewake domain. Fix it.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0dd356bb6ff5 ("drm/i915: Eliminate Gen9 special case")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479373363-16528-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915/opregion: fill in the CADL from connector list, not DIDL

This is essentially the same thing as duplicating DIDL now that the
connector list has the ACPI device IDs.

Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Tested-by: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/ea0a052fa99a4cb56b559a815866434bcfef853d.1479295490.git.jani.nikula@intel.com

drm/i915: make i915 the source of acpi device ids for _DOD

The graphics driver is supposed to define the DIDL, which are used for
_DOD, not the BIOS. Restore that behaviour.

This is basically a revert of

commit 3143751ff51a163b77f7efd389043e038f3e008e
Author: Zhang Rui <rui.zhang@intel.com>
Date:   Mon Mar 29 15:12:16 2010 +0800

    drm/i915: set DIDL using the ACPI video output device _ADR method return.

which went out of its way to cater to a specific BIOS, setting up DIDL
based on _ADR method. Perhaps that approach worked on that specific
machine, but on the machines I checked the _ADR method invents the
device identifiers out of thin air if DIDL has not been set. The source
for _ADR is also supposed to be the DIDL set by the driver, not the
other way around.

With this, we'll also limit the number of outputs to what the driver
actually has.

A side effect of this change is that the DIDL, and by proxy CADL, will
be initialized in the order of the connector list. That, in turn, has
internal panels in front, ensuring they're included in the DIDL and CADL
lists. Hopefully this ensures the BIOS does not block backlight hotkey
events, thinking the internal panel is off.

v2: do not set ACPI_DEVICE_ID_SCHEME in the device id (Peter Wu)

v3: Rebase

Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Tested-by: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-and-tested-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9660d29cf310c17bbf4d58c0e09d5b047446e2d5.1479295490.git.jani.nikula@intel.com

drm/i915: fix the dequeue logic for single_port_submission context

For a single_port_submission context, GVT expects that it can only be
submitted to port 0, and there shouldn't be any other context in port 1
at the same time. This is required by GVT-g context to have an opportunity
to save/restore some non-hw context render registers.

This patch is to workaround GVT-g.

v2: optimized code by following Chris's advice, and added more comments to
explain the patch.
v3: followed the coding style.

Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479305104-17049-1-git-send-email-min.he@intel.com

drm/i915/gvt: remove unresolved vfio pin/unpin pages interface dependency

Instead of partially depending on vfio pin/unpin pages interface if
mdev is available, which would result in failure if vfio is not
on. But replace with a wrapper which need to be fixed till mdev
support got fully merged.

Cc: Jike Song <jike.song@intel.com>
Cc: Xiaoguang Chen <xiaoguang.chen@intel.com>
Reviewed-by: Xiaoguang Chen <Xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: drop checks for early Skylake revisions

We no longer cater for pre-production revisions of Skylake.

Fixes: d4362225e8cb ("drm/i915/gvt: update misc ctl regs base on stepping info")
Cc: Ping Gao <ping.a.gao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: <intel-gfx@lists.freedesktop.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'drm-vc4-next-2016-11-16' of https://github.com/anholt/linux into drm-next

This pull request brings in fragment shader threading and ETC1 support
for vc4.

Merge branch 'drm-tda998x-mali' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next

Fix conncector registration with tda998x.

* 'drm-tda998x-mali' of git://git.armlinux.org.uk/~rmk/linux-arm:
  drm/i2c: tda998x: mali-dp: hdlcd: refactor connector registration

Merge tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Another pile of misc:
- Explicit fencing for atomic! Big thanks to Gustavo, Sean, Rob 3x, Brian
  and anyone else I've forgotten to make this happen.
- roll out fbdev helper ops to drivers (Stefan Christ)
- last bits of drm_crtc split-up&kerneldoc
- some drm_irq.c crtc functions cleanup
- prepare_fb helper for cma, works correctly with explicit fencing (Marek
  Vasut)
- misc small patches all over

* tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc: (51 commits)
  drm/fence: add out-fences support
  drm/fence: add fence timeline to drm_crtc
  drm/fence: add in-fences support
  drm/bridge: analogix_dp: return error if transfer none byte
  drm: drm_irq.h header cleanup
  drm/irq: Unexport drm_vblank_on/off
  drm/irq: Unexport drm_vblank_count
  drm/irq: Make drm_vblank_pre/post_modeset internal
  drm/nouveau: Use drm_crtc_vblank_off/on
  drm/amdgpu: Use drm_crtc_vblank_on/off for dce6
  drm/color: document NULL values and default settings better
  drm: Drop externs from drm_crtc.h
  drm: Move tile group code into drm_connector.c
  drm: Extract drm_mode_config.[hc]
  Revert "drm: Add aspect ratio parsing in DRM layer"
  Revert "drm: Add and handle new aspect ratios in DRM layer"
  drm/print: Move kerneldoc next to definition
  drm: Consolidate dumb buffer docs
  drm: Clean up kerneldoc for struct drm_driver
  drm: Extract drm_drv.h
  ...

drm/vc4: Add fragment shader threading support

FS threading brings performance improvements of 0-20% in glmark2.

The validation code checks for thread switch signals and ensures that
the registers of the other thread are not touched, and that our clamps
are not live across thread switches.  It also checks that the
threading and branching instructions do not interfere.

(Original patch by Jonas, changes by anholt for style cleanup,
removing validation the kernel doesn't need to do, and adding the flag
for userspace).

v2: Minor style fixes from checkpatch.

Signed-off-by: Jonas Pfeil <pfeiljonas@gmx.de>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/i915/execlists: Use a local lock for dfs_link access

Avoid requiring struct_mutex for exclusive access to the temporary
dfs_link inside the i915_dependency as not all callers may want to touch
struct_mutex. So rather than force them to take a highly contended
lock, introduce a local lock for the execlists schedule operation.

Reported-by: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 9a151987d709 ("drm/i915: Add execution priority boosting for mmioflips")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161116152721.11053-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/fence: add out-fences support

Support DRM out-fences by creating a sync_file with a fence for each CRTC
that sets the OUT_FENCE_PTR property.

We use the out_fence pointer received in the OUT_FENCE_PTR prop to send
the sync_file fd back to userspace.

The sync_file and fd are allocated/created before commit, but the
fd_install operation only happens after we know that commit succeed.

v2: Comment by Rob Clark:
- Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here.

    Comment by Daniel Vetter:
- Add clean up code for out_fences

v3: Comments by Daniel Vetter:
- create DRM_MODE_ATOMIC_EVENT_MASK
- userspace should fill out_fences_ptr with the crtc_ids for which
it wants fences back.

v4: Create OUT_FENCE_PTR properties and remove old approach.

v5: Comments by Brian Starkey:
- Remove extra fence_get() in atomic_ioctl()
- Check ret before iterating on the crtc_state
- check ret before fd_install
- set fence_state to NULL at the beginning
- check fence_state->out_fence_ptr before put_user()
- change order of fput() and put_unused_fd() on failure

     - Add access_ok() check to the out_fence_ptr received
     - Rebase after fence -> dma_fence rename
     - Store out_fence_ptr in the drm_atomic_state
     - Split crtc_setup_out_fence()
     - return -1 as out_fence with TEST_ONLY flag

v6: Comments by Daniel Vetter
- Add prepare/unprepare_crtc_signaling()
- move struct drm_out_fence_state to drm_atomic.c
- mark get_crtc_fence() as static

    Comments by Brian Starkey
- proper set fence_ptr fence_state array
- isolate fence_idx increment

    - improve error handling

v7: Comments by Daniel Vetter
- remove prefix from internal functions
- make out_fence_ptr an s64 pointer
- degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail
- fix doc issues
- filter out OUT_FENCE_PTR == NULL and do not fail in this case
- add complete_crtc_signalling()
- krealloc fence_state on demand

    Comment by Brian Starkey
- remove unused crtc_state arg from get_out_fence()

v8: Comment by Brian Starkey
- cancel events before check for !fence_state
- convert a few lefovers u64 types for out_fence_ptr
- fix memleak by assign fence_state earlier after realloc
- proper accout num_fences in case of error

v9: Comment by Brian Starkey
- memset last position of fence_state after krealloc
    Comments by Sean Paul
- pass install_fds in complete_crtc_signaling() instead of ret

     - put_user(-1, fence_ptr) when decoding props

v10: Comment by Brian Starkey
- remove unneeded num_fences increment on error path
- kfree fence_state after installing fences fd

v11: rebase against latest drm-misc

v12: rebase again against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com> (v10)
[danvet: Appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org

drm/fence: add fence timeline to drm_crtc

Create one timeline context for each CRTC to be able to handle out-fences
and signal them. It adds a few members to struct drm_crtc: fence_context,
where we store the context we get from fence_context_alloc(), the
fence seqno and the fence lock, that we pass in fence_init() to be
used by the fence.

v2: Comment by Daniel Stone:
- add BUG_ON() to fence_to_crtc() macro

v3: Comment by Ville Syrjälä
- Use more meaningful name as crtc timeline name

v4: Comments by Brian Starkey
- Use even more meaninful name for the crtc timeline
- add doc for timeline_name
    Comment by Daniel Vetter
- use in-line style for comments

    - rebase after fence -> dma_fence rename

v5: Comment by Daniel Vetter
- Add doc for drm_crtc_fence_ops

v6: Comment by Chris Wilson
- Move fence_to_crtc to drm_crtc.c
- Move export of drm_crtc_fence_ops to drm_crtc_internal.h

    - rebase against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5)
Reviewed-by: Sean Paul <seanpaul@chromium.org> (v5)
Tested-by: Robert Foss <robert.foss@collabora.com> (v5)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479220628-10204-1-git-send-email-gustavo@padovan.org

drm/i915/bxt: Broxton decoupled MMIO

Decoupled MMIO is an alternative way to access forcewake domain
registers, which requires less cycles for a single read/write and
avoids frequent software forcewake.
This certainly gives advantage over the forcewake as this new
mechanism “decouples” CPU cycles and allow them to complete even
when GT is in a CPD (frequency change) or C6 state.

This can co-exist with forcewake and we will continue to use forcewake
as appropriate. E.g. 64-bit register writes to avoid writing 2 dwords
separately and land into funny situations.

v2:
- Moved platform check out of the function and got rid of duplicate
 functions to find out decoupled power domain (Chris)
- Added a check for forcewake already held and skipped decoupled
 access (Chris)
- Skipped writing 64 bit registers through decoupled MMIO (Chris)

v3:
- Improved commit message with more info on decoupled mmio (Tvrtko)
- Changed decoupled operation to enum and used u32 instead of
 uint_32 data type for register offset (Tvrtko)
- Moved HAS_DECOUPLED_MMIO to device info (Tvrtko)
- Added lookup table for converting fw_engine to pd_engine (Tvrtko)
- Improved __gen9_decoupled_read and __gen9_decoupled_write
 routines (Tvrtko)

v4:
- Fixed alignment and variable names (Chris)
- Write GEN9_DECOUPLED_REG0_DW1 register in just one go (Zhe Wang)

v5:
- Changed HAS_DECOUPLED_MMIO() argument name to dev_priv (Tvrtko)
- Sanitize info->had_decoupled_mmio at init (Chris)

Signed-off-by: Zhe Wang <zhe1.wang@intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479230360-22395-1-git-send-email-praveen.paneri@intel.com

drm/fence: add in-fences support

There is now a new property called IN_FENCE_FD attached to every plane
state that receives sync_file fds from userspace via the atomic commit
IOCTL.

The fd is then translated to a fence (that may be a fence_array
subclass or just a normal fence) and then used by DRM to fence_wait() for
all fences in the sync_file to signal. So it only commits when all
framebuffers are ready to scanout.

v2: Comments by Daniel Vetter:
- remove set state->fence = NULL in destroy phase
- accept fence -1 as valid and just return 0
- do not call fence_get() - sync_file_fences_get() already calls it
- fence_put() if state->fence is already set, in case userspace
set the property more than once.

v3: WARN_ON if fence is set but state has no FB

v4: Comment from Maarten Lankhorst
- allow set fence with no related fb

v5: rename FENCE_FD to IN_FENCE_FD

v6: Comments by Daniel Vetter:
- rename plane_state->in_fence back to "fence"
- re-introduce WARN_ON if fence set but no fb

     - rebase after fence -> dma_fence rename

v7: Comments by Brian Starkey
- set state->fence to NULL when duplicating the state
- fail if IN_FENCE_FD was already set

v8: rebase against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com>
[danvet: Rebase onto extracted drm_mode_config.[hc].]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bridge: analogix_dp: return error if transfer none byte

Reference from drm_dp_aux description (about transfer):
Upon success, the implementation should return the number of payload bytes
that were transferred, or a negative error-code on failure. Helpers
propagate errors from the .transfer() function, with the exception of
the -EBUSY error, which causes a transaction to be retried. On a short,
helpers will return -EPROTO to make it simpler to check for failure.

The analogix_dp_transfer will return num_transferred, but if there is none
byte been transferred, the return value will be 0, which means success, we
should return error-code if transfer none byte.

for (retry = 0; retry < 32; retry++) {
err = aux->transfer(aux, &msg);
if (err < 0) {
if (err == -EBUSY)
continue;

goto unlock;
}
}

Cc: zain wang <wzz@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1479255219-7243-1-git-send-email-jay.xu@rock-chips.com

drm/i915/gvt: check workload empty before real scan

This patch will fix warning log print during command scan caused by
empty workload (ring head equals tail). This patch avoid going into
real scan process if workload is empty. It's guest's responsibility
to make sure if an empty workload is proper to submit to HW.

[v2] modify the patch description. It's a fix, not a w/a.

Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>