drm/i915: Allow a context to define its set of engines

Over the last few years, we have debated how to extend the user API to
support an increase in the number of engines, that may be sparse and
even be heterogeneous within a class (not all video decoders created
equal). We settled on using (class, instance) tuples to identify a
specific engine, with an API for the user to construct a map of engines
to capabilities. Into this picture, we then add a challenge of virtual
engines; one user engine that maps behind the scenes to any number of
physical engines. To keep it general, we want the user to have full
control over that mapping. To that end, we allow the user to constrain a
context to define the set of engines that it can access, order fully
controlled by the user via (class, instance). With such precise control
in context setup, we can continue to use the existing execbuf uABI of
specifying a single index; only now it doesn't automagically map onto
the engines, it uses the user defined engine map from the context.

v2: Fixup freeing of local on success of get_engines()
v3: Allow empty engines[]
v4: s/nengine/num_engines/
v5: Replace 64 limit on num_engines with a note that execbuf is
currently limited to only using the first 64 engines.
v6: Actually use the engines_mutex to guard the ctx->engines.

Testcase: igt/gem_ctx_engines
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-2-chris@chris-wilson.co.uk

drm/i915: Restore control over ppgtt for context creation ABI

Having hid the partially exposed new ABI from the PR, put it back again
for completion of context recovery. A significant part of context
recovery is the ability to reuse as much of the old context as is
feasible (to avoid expensive reconstruction). The biggest chunk kept
hidden at the moment is fine-control over the ctx->ppgtt (the GPU page
tables and associated translation tables and kernel maps), so make
control over the ctx->ppgtt explicit.

This allows userspace to create and share virtual memory address spaces
(within the limits of a single fd) between contexts they own, along with
the ability to query the contexts for the vm state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-1-chris@chris-wilson.co.uk

drm/i915: Bump gen7+ fb size limits to 16kx16k

With gtt remapping in place we can use arbitrarily large
framebuffers. Let's bump the limits to 16kx16k on gen7+.
The limit was chosen to match the maximum 2D surface size
of the 3D engine.

With the remapping we could easily go higher than that for the
display engine. However the modesetting ddx will blindly assume
it can handle whatever is reported via kms. The oversized
buffer dimensions are not caught by glamor nor Mesa until
finally an assert will trip when genxml attempts to pack the
SURFACE_STATE. So we pick a safe limit to avoid the X server
from crashing (or potentially misbehaving if the genxml asserts
are compiled out).

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110187
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-9-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Bump fb stride limit to 128KiB for gen4+ and 256KiB for gen7+

With gtt remapping plugged in we can simply raise the stride
limit on gen4+. Let's just pick the limit to match the render
engine max stride (256KiB on gen7+, 128KiB on gen4+).

No remapping CCS because the virtual address of each page actually
matters due to the new hash mode
(WaCompressedResourceDisplayNewHashMode:skl,kbl etc.), and no
remapping on gen2/3 due extra complications from fence alignment
and gen2 2KiB GTT tile size. Also no real benefit since the
display engine limits already match the other limits.

v2: Rebase due to is_ccs_modifier()
v3: Tweak the comment and commit msg
v4: Fix gen4+ stride limit to be 128KiB

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v3
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-8-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping

Align dumb buffer stride to 4k if the fb will be big enough to
require gtt remapping.

v2: Leave the stride alone for buffers that look to be for the cursor
v3: Make it not a hack (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Overcome display engine stride limits via GTT remapping

The display engine stride limits are getting in our way. On SKL+
we are limited to 8k pixels, which is easily exceeded with three
4k displays. To overcome this limitation we can remap the pages
in the GTT to provide the display engine with a view of memory
with a smaller stride.

The code is mostly already there as We already play tricks with
the plane surface address and x/y offsets.

A few caveats apply:
* linear buffers need the fb stride to be page aligned, as
  otherwise the remapped lines wouldn't start at the same
  spot
* compressed buffers can't be remapped due to the new
  ccs hash mode causing the virtual address of the pages
  to affect the interpretation of the compressed data. IIRC
  the old hash was limited to the low 12 bits so if we were
  using that mode we could remap. As it stands we just refuse
  to remapp with compressed fbs.
* no remapping gen2/3 as we'd need a fence for the remapped
  vma, which we currently don't have. Need to deal with the
  fence POT requirements, and do something about the gen2
  gtt page size vs tile size difference

v2: Rebase due to is_ccs_modifier()
    Fix up the skl+ stride_mult mess
    memset() the gtt_view because otherwise we could leave
    junk in plane[1] when going from 2 plane to 1 plane format
v3: intel_check_plane_stride() was split out
v4: Drop the aligned viewport stuff, it was meant for ccs which
    can't be remapped anyway
v5: Introduce intel_plane_can_remap()
    Reorder the code so that plane_state->view gets filled
    even for invisible planes, otherwise we'd keep using
    stale values and could explode during remapping. The new
    logic never remaps invisible planes since we don't have
    a viewport, and instead pins the full fb instead
v6: Fix plane src coord checks after remapping by moving
    plane_state->base.src to the final plane x/y offsets.
    Allow intel_plane_check_stride() to fail even with
    remapping (can happen at least with a linear 64bpp
    fb with a 4k plane and a suitably inconvenient src
    coordinates).
    Improve aux plane FIXME (Daniel)
    Move some code shuffling into a separate patch (Daniel)

Testcase: igt/kms_big_fb
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Shuffle stride checking code around

Reorganize some fb stride checking code a bit to prepare for
gtt remapping. And do a bit of s/pitch/stride/ renaming in the
process for a bit more uniformity (apart from the whole
fb->pitches[] thing).

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/selftests: Add live vma selftest

Add a live selftest to excercise rotated/remapped vmas. We simply
write through the rotated/remapped vma, and confirm that the data
appears in the right page when read through the normal vma.

Not sure what the fallout of making all rotated/remapped vmas
mappable/fenceable would be, hence I just hacked it in the test.

v2: Grab rpm reference (Chris)
    GEM_BUG_ON(view.type not as expected) (Chris)
    Allow CAN_FENCE for rotated/remapped vmas (Chris)
    Update intel_plane_uses_fence() to ask for a fence
    only for normal vmas on gen4+
v3: Deal with intel_wakeref_t
v4: Rebase

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/selftests: Add mock selftest for remapped vmas

Extend the rotated vma mock selftest to cover remapped vmas as
well.

TODO: reindent the loops I guess? Left like this for now to
ease review

v2: Include the vma type in the error message (Chris)
v3: Deal with trimmed sg
v4: Drop leftover debugs

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Add a new "remapped" gtt_view

To overcome display engine stride limits we'll want to remap the
pages in the GTT. To that end we need a new gtt_view type which
is just like the "rotated" type except not rotated.

v2: Use intel_remapped_plane_info base type
    s/unused/unused_mbz/ (Chris)
    Separate BUILD_BUG_ON()s (Chris)
    Use I915_GTT_PAGE_SIZE (Chris)
v3: Use i915_gem_object_get_dma_address() (Chris)
    Trim the sg (Tvrtko)
v4: Actually trim this time. Limit the max length
    to one row of pages to keep things simple

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/execlists: Drop promotion on unsubmit

With the disappearance of NEWCLIENT, we no longer need to provide the
priority boost on preemption in order to prevent repeated gazumping,
and we can remove the dead code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-5-chris@chris-wilson.co.uk

drm/i915: Downgrade NEWCLIENT to non-preemptive

Commit 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") had the
intended consequence of not allowing a sequence of work that merely
crossed into a new engine the privilege to be promoted to NEWCLIENT
status. It also had the unintended consequence of actually making
NEWCLIENT effective on heavily oversubscribed transcode machines and
impacting upon their throughput.

If we consider a client packet composed of (rcsA, rcsB, vcs) and 30 of
those clients, using the NEWCLIENT boost that will be scheduled as

rcsA x 30, (rcsB, vcs) x 30

where as before it would have been

(rcsA, rcsB, vcs) x 30

That is with NEWCLIENT only boosting the first request of each client,
we would execute all rcsA requests prior to running on the vcs engines;
acruing a lot of dead time as compared to the previous case where the
vcs engine would be started in parallel to processing the second client.

The previous patch has the effect of delaying submission until it is
required by a third party (either the user with an explicit wait, or by
another client/engine). We reduce the NEWCLIENT bump to a mere WAIT,
which has the effect of removing its preemptive grant and reducing it to
the same level as any other user interaction -- that it will not be
promoted above the interengine dependencies, and so preventing NEWCLIENTS
from starving other engines. This a large nerf to the rrul properties of
the current NEWCLIENT, but it still does give prioritised submission to
new requests from light workloads.

References: b16c765122f9 ("drm/i915: Priority boost for new clients")
Fixes: 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") # customer impact
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-4-chris@chris-wilson.co.uk

drm/i915: Bump signaler priority on adding a waiter

The handling of the no-preemption priority level imposes the restriction
that we need to maintain the implied ordering even though preemption is
disabled. Otherwise we may end up with an AB-BA deadlock across multiple
engine due to a real preemption event reordering the no-preemption
WAITs. To resolve this issue we currently promote all requests to WAIT
on unsubmission, however this interferes with the timeslicing
requirement that we do not apply any implicit promotion that will defeat
the round-robin timeslice list. (If we automatically promote the active
request it will go back to the head of the queue and not the tail!)

So we need implicit promotion to prevent reordering around semaphores
where we are not allowed to preempt, and we must avoid implicit
promotion on unsubmission. So instead of at unsubmit, if we apply that
implicit promotion on adding the dependency, we avoid the semaphore
deadlock and we also reduce the gains made by the promotion for user
space waiting. Furthermore, by keeping the earlier dependencies at a
higher level, we reduce the search space for timeslicing without
altering runtime scheduling too badly (no dependencies at all will be
assigned a higher priority for rrul).

v2: Limit the bump to external edges (as originally intended) i.e.
between contexts and out to the user.

Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-3-chris@chris-wilson.co.uk

drm/i915/hdcp: Use both bits for device_count

Smatch spotted:
drivers/gpu/drm/i915//intel_hdcp.c:1406 hdcp2_authenticate_repeater_topology() warn: should this be a bitwise op?

and indeed looks to be suspect that we do need to use a bitwise or to
combine the two register fields into one counter.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517102225.3069-3-chris@chris-wilson.co.uk

drm/i915/dp: Initialise locals for static analysis

Just to squelch an smatch warning that doesn't see the with_() being
taken unconditionally:
drivers/gpu/drm/i915//intel_dp.c:230 intel_dp_get_fia_supported_lane_count() error: uninitialized symbol 'lane_info'.
drivers/gpu/drm/i915//intel_dp.c:5338 intel_digital_port_connected() error: uninitialized symbol 'is_connected'.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517102225.3069-2-chris@chris-wilson.co.uk

drm/i915: Truly bump ready tasks ahead of busywaits

In commit b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of
busywaits"), I tried cutting a corner in order to not install a signal
for each of our dependencies, and only listened to requests on which we
were intending to busywait. The compromise that was made was that
instead of then being able to promote the request with a full
NOSEMAPHORE like its non-busywaiting brethren, as we had not ensured we
had cleared the semaphore chain, we settled for only using the NEWCLIENT
boost. With an over saturated system with multiple NEWCLIENTS in flight
at any time, this was found to be an inadequate promotion and left us
with a much poorer scheduling order than prior to using semaphores.

The outcome of this patch, is that all requests have NOSEMAPHORE
priority when they have no dependencies and are ready to run and not
busywait, restoring the pre-semaphore ordering on saturated systems.

We can demonstrate the effect of poor scheduling order by oversaturating
the system using gem_wsim on a system with multiple vcs engines
(i.e running the same workloads across more clients than required for
peak throughput, e.g. media_load_balance_17i7.wsim -c4 -b context):

x v5.1 (normalized)
+ tip
* fix
+------------------------------------------------------------------------+
|                                                                    x   |
|                                                                    x   |
|                                                                    x   |
|                                                                    x   |
|                                                                   %x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|         +                                                        %#xx  |
|         +                                                        %#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%##x  |
|         +++                                                     %%##x  |
|         +++                                                     %%##x  |
|         +++                                                     %%##x  |
|        ++++                                                     %%##x  |
|        ++++                                                     %%##x  |
|        ++++                                                     %%##xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++ +                                                   %#O#xx |
|        ++++ +                                                   %#O#xx |
|        ++++++ +                                                 %#O#xx |
|       ++++++++++                                                %OOOxxx|
|       ++++++++++       +                                       %#OOO#xx|
|     + ++++++++++++ ++ +++++    +                        ++    @@OOOO#xx|
|                                                                   |A_| |
||__________M_______A____________________|                               |
|                                                                 |A_|   |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       0.99456       1.00628      0.999985     1.0001545  0.0024387139
+ 120      0.873021       1.00037      0.884134    0.90148752   0.039190862
Difference at 99.5% confidence
-0.098667 +/- 0.0110762
-9.86517% +/- 1.10745%
(Student's t, pooled s = 0.0277657)
% 120      0.990207       1.00165     0.9970265    0.99699748     0.0021024
Difference at 99.5% confidence
-0.003157 +/- 0.000908245
-0.315651% +/- 0.0908105%
(Student's t, pooled s = 0.00227678)

Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-2-chris@chris-wilson.co.uk

drm/i915: Mark semaphores as complete on unsubmit out if payload was started

Avoid charging us for the presumed busywait if the request was preempted
after successfully using semaphores to reduce inter-engine latency.

v2: Bump the priority to reflect the lack of semaphores now required.

References: ca6e56f654e7 ("drm/i915: Disable semaphore busywaits on saturated systems")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-1-chris@chris-wilson.co.uk

drm/i915: Assert that TypeC ports are not used for eDP

Add an assert that we don't use TypeC ports for eDP. That may in theory
be possible on TypeC legacy ports, but I'm not sure if that's a
practical scenario, so let's deal with that only if there's a use case.
Adding support for that wouldn't be too difficult, since TypeC mode
switching is not possible on TypeC legacy ports.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-12-imre.deak@intel.com

drm/i915: Avoid taking the PPS lock for non-eDP/VLV/CHV

On ICL we have to make sure that we enable the AUX power domain in a
controlled way (corresponding to the port's actual TypeC mode). Since
the PPS lock - which takes an AUX power ref - is only needed on
eDP on all platforms and eDP/DP on VLV/CHV avoid taking it in all
other cases.

v2:
- Clarify commit log about the condition for taking the PPS lock.
  (Ville)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-11-imre.deak@intel.com

drm/i915: Replace use of PLLS power domain with DISPLAY_CORE domain

There isn't a separate power domain specific to PLLs. When programming
them we require the same power domain to be enabled which is needed when
accessing other display core parts (not specific to any
pipe/port/transcoder). This corresponds to the DISPLAY_CORE domain added
previously in this patchset, so use that instead to save bits in the
power domain mask.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-10-imre.deak@intel.com

drm/i915: Remove the unneeded AUX power ref from intel_dp_hpd_pulse()

The power get/put was added in

commit 1c767b339b39 ("drm/i915: take display port power domain in DP HPD handler")
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Aug 18 14:42:42 2014 +0300

to account for the HW access in ibx_digital_port_connected(). This
latter call was in turn removed in

commit 7d23e3c37bb3 ("drm/i915: Cleaning up intel_dp_hpd_pulse")
Author: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Date:   Wed Mar 30 18:05:23 2016 +0530

after which we didn't actually need the power reference.

One way we are accessing the HW during HPD pulse handling is via DP AUX
transfers, but the transfer function takes its own reference, so doesn't
need the reference in intel_dp_hpd_pulse().

The other spot is in

intel_psr_short_pulse()->intel_psr_disable_locked()

but that can only happen when the panel is enabled with the
corresponding modeset already holding the required power reference.

v2:
- Remove the unneeded power get/put from intel_psr_disable_locked().
  (Ville)
- Checkpatch commit quoting format fix in the commit log.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-9-imre.deak@intel.com

drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()

We don't need the AUX power for the whole duration of the detect, only
when we're doing AUX transfers. The AUX transfer function takes its own
reference on the AUX power domain already. The two places during detect
which access display core registers (not specific to a
pipe/port/transcoder) only need the power domain that is required for
that access. That power domain is equivalent to the device global power
domain on most platforms (enabled whenever we hold a runtime PM
reference) except on CHV/VLV where it's equivalent to the display power
well.

Add a new power domain that reflects the above, and use this at the two
spots accessing registers. With that we can avoid taking the AUX
reference for the whole duration of the detect function.

Put the domains asynchronously to avoid the unneeded on-off-on toggling.

Also adapt the idea from with_intel_runtime_pm et al. for making it easy
to write short sequences where a display power ref is needed.

v2: (Ville)
- Add with_intel_display_power() helper to simplify things.
- s/bool res/bool is_connected/

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-8-imre.deak@intel.com

drm/i915: WARN for eDP encoders in intel_dp_detect_dpcd()

We are not calling this function for eDP, so add an early assert about
this for clarity.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-7-imre.deak@intel.com

drm/i915: Disable power asynchronously during DP AUX transfers

In a follow-up patch we will restrict holding the reference on the AUX
power domain to the AUX transfer function. To avoid the unnecessary
on-off-on power togglings drop the reference asynchronously.

There is no reason we couldn't do this in general and also put the
reference asynchronously in pps_unlock(); but that's a separate change
that can be done as a follow-up.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-6-imre.deak@intel.com

drm/i915: Add support for asynchronous display power disabling

By disabling a power domain asynchronously we can restrict holding a
reference on that power domain to the actual code sequence that
requires the power to be on for the HW access it's doing, by also
avoiding unneeded on-off-on togglings of the power domain (since the
disabling happens with a delay).

One benefit is potential power saving due to the following two reasons:
1. The fact that we will now be holding the reference only for the
   necessary duration by the end of the patchset. While simply not
   delaying the disabling has the same benefit, it has the problem that
   frequent on-off-on power switching has its own power cost (see the 2.
   point below) and the debug trace for power well on/off events will
   cause a lot of dmesg spam (see details about this further below).
2. Avoiding the power cost of freuqent on-off-on power switching. This
   requires us to find the optimal disabling delay based on the measured
   power cost of on->off and off->on switching of each power well vs.
   the power of keeping the given power well on.

   In this patchset I'm not providing this optimal delay for two
   reasons:
   a) I don't have the means yet to perform the measurement (with high
      enough signal-to-noise ratio, or with the help of an energy
      counter that takes switching into account). I'm currently looking
      for a way to measure this.

   b) Before reducing the disabling delay we need an alternative way for
      debug tracing powerwell on/off events. Simply avoiding/throttling
      the debug messages is not a solution, see further below.

   Note that even in the case where we can't measure any considerable
   power cost of frequent on-off switching of powerwells, it still would
   make sense to do the disabling asynchronously (with 0 delay) to avoid
   blocking on the disabling. On VLV I measured this disabling time
   overhead to be 1ms on average with a worst case of 4ms.

In the case of the AUX power domains on ICL we would also need to keep
the sequence where we hold the power reference short, the way it would
be by the end of this patchset where we hold it only for the actual AUX
transfer. Anything else would make the locking we need for ICL TypeC
ports (whenever we hold a reference on any AUX power domain) rather
problematic, adding for instance unnecessary lockdep dependencies to
the required TypeC port lock.

I chose the disabling delay to be 100msec for now to avoid the unneeded
toggling (and so not to introduce dmesg spamming) in the DP MST sideband
signaling code. We could optimize this delay later, once we have the
means to measure the switching power cost (see above).

Note that simply removing/throttling the debug tracing for power well
on/off events is not a solution. We need to know the exact spots of
these events and cannot rely only on incorrect register accesses caught
(due to not holding a wakeref at the time of access). Incorrect
powerwell enabling/disabling could lead to other problems, for instance
we need to keep certain powerwells enabled for the duration of modesets
and AUX transfers.

v2:
- Clarify the commit log parts about power cost measurement and the
  problem of simply removing/throttling debug tracing. (Chris)
- Optimize out local wakeref vars at intel_runtime_pm_put_raw() and
  intel_display_power_put_async() call sites if
  CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n. (Chris)
- Rebased on v2 of the wakeref w/o power-on guarantee patch.
- Add missing docbook headers.
v3:
- Checkpatch spelling/missing-empty-line fix.
v4:
- Fix unintended local wakeref var optimization when using
  call-arguments with side-effects, by using inline funcs instead of
  macros. In this patch in particular this will fix the
  intel_display_power_grab_async_put_ref()->intel_runtime_pm_put_raw()
  call).

  No size change in practice (would be the same disregarding the
  corresponding change in intel_display_power_grab_async_put_ref()):
  $ size i915-macro.ko
     text    data     bss     dec     hex filename
  2455190  105890   10272 2571352  273c58 i915-macro.ko
  $ size i915-inline.ko
     text    data     bss     dec     hex filename
  2455195  105890   10272 2571357  273c5d i915-inline.ko

  Kudos to Stan for reporting the raw-wakeref WARNs this issue caused. His
  config has CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n, which I didn't retest
  after v1, and we are also not testing this config in CI.

  Now tested both with CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y/n on ICL,
  connecting both Chamelium and regular DP, HDMI sinks.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513192533.12586-1-imre.deak@intel.com

drm/i915: Verify power domains state during suspend in all cases

There is no reason why we couldn't verify the power domains state during
suspend in all cases, so do that. I overlooked this when originally
adding the check.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-4-imre.deak@intel.com

drm/i915: Force printing wakeref tacking during pm_cleanup

Make sure we print and drop the wakeref tracking info during pm_cleanup
even if there are wakeref holders (either raw-wakeref or wakelock
holders). Dropping the wakeref tracking means that a late put on the ref
will WARN since the wakeref will be unknown, but that is rightly so,
since the put is late and we want to catch that case.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-3-imre.deak@intel.com

drm/i915: Add support for tracking wakerefs w/o power-on guarantee

It's useful to track runtime PM refs that don't guarantee a device
power-on state to the rest of the driver. One such case is holding a
reference that will be put asynchronously, during which normal users
without their own reference shouldn't access the HW. A follow-up patch
will add support for disabling display power domains asynchronously
which needs this.

For this we can split wakeref_count into a low half-word tracking
all references (raw-wakerefs) and a high half-word tracking
references guaranteeing a power-on state (wakelocks).

Follow-up patches will make use of the API added here.

While at it add the missing docbook header for the unchecked
display-power and runtime_pm put functions.

No functional changes, except for printing leaked raw-wakerefs
and wakelocks separately in intel_runtime_pm_cleanup().

v2:
- Track raw wakerefs/wakelocks in the low/high half-word of
  wakeref_count, instead of adding a new counter. (Chris)
v3:
- Add a struct_member(T, m) helper instead of open-coding it. (Chris)
- Checkpatch indentation formatting fix.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-2-imre.deak@intel.com

drm/i915/icl: More workaround for port F detection due to broken VBTs

Add another ICL-Y PCIID that proved to have only 5 ports to the
corresponding PCIID list.

Meanwhile I'm trying to get a complete list of all PCIIDs with less than
6 ports and/or get a VBT fix to mark these ports non-existent, but until
then the only way is to go one-by-one.

This fixes the following error on machines with less than 6 port:

[drm:intel_power_well_enable [i915]] enabling AUX F
------------[ cut here ]------------
WARN_ON(intel_wait_for_register(&dev_priv->uncore, regs->driver, (0x1 << ((pw_idx) * 2)), (0x1 << ((pw_idx) * 2)), 1))

(Internal reference: BSpec/Index/20584/Issues, HSD/1306084116)

Cc: Mika Kahola <mika.kahola@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108915
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190510140255.25215-1-imre.deak@intel.com

drm/i915: Fix pixel clock and crtc clock config mismatch

In case of dual link mode, the mode clock that we get
from the VBT is halved.

v2: Simplify the calculation (Jani).

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556809862-31203-4-git-send-email-vandita.kulkarni@intel.com

drm/i915: Fix pipe config mismatch for bpp, output format

Read back the pixel fomrat register and get the bpp.

v2: Read the PIPE_MISC register (Jani).

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556809862-31203-3-git-send-email-vandita.kulkarni@intel.com

drm/i915: Refactor bdw_get_pipemisc_bpp

Move bdw_get_pipemisc_bpp alongside bdw_set_pipemisc

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556809862-31203-2-git-send-email-vandita.kulkarni@intel.com

drm/i915: Fix the pipe state timing mismatch warnings

Adjust the get transcoder timings for mipi dsi as per the
set timing calculations.

v2: Use the existing intel_get_pipe_timings and do the dsi
    specific adjustments in the encoder get_config hook.(Ville, Jani)

v3: Exclude VBLANK and HBLANK registers for dsi transcoder.

v4: Fix the incomplete conditional logic.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556809862-31203-1-git-send-email-vandita.kulkarni@intel.com

drm/hdcp: drm_hdcp_request_srm() as static

Below Sparsh warnings are fixed.

Commit: drm: revocation check at drm subsystem
+drivers/gpu/drm/drm_hdcp.c:235:6: warning: symbol
'drm_hdcp_request_srm' was not declared. Should it be static?
+drivers/gpu/drm/drm_hdcp.c:27:3: warning: symbol 'srm_data' was not
declared. Should it be static?
+drivers/gpu/drm/drm_hdcp.c:317:5: warning: symbol 'drm_setup_hdcp_srm'
was not declared. Should it be static?
+drivers/gpu/drm/drm_hdcp.c:327:6: warning: symbol
'drm_teardown_hdcp_srm' was not declared. Should it be static?

cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513133504.18612-1-ramalingam.c@intel.com

drm/i915: Check for no-op priority changes first

In all likelihood, the priority and node are already in the CPU cache
and by checking them first, we can avoid having to chase the
*request->hwsp for the current breadcrumb.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-3-chris@chris-wilson.co.uk

drm/i915: Pass i915_sched_node around internally

To simplify the next patch, update bump_priority and schedule to accept
the internal i915_sched_ndoe directly and not expect a request pointer.

add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function                                     old     new   delta
i915_schedule_bump_priority                  109     113      +4
i915_schedule                                 50      54      +4
__i915_schedule                              922     907     -15

v2: Adopt node for the old rq local, since it no longer is a request but
the origin node.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-2-chris@chris-wilson.co.uk

drm/i915: Rearrange i915_scheduler.c

To avoid pulling in a forward declaration in the next patch, move the
i915_sched_node handling to after the main dfs of the scheduler.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-1-chris@chris-wilson.co.uk

drm/i915: Add readout and state check for pch_pfit.force_thru

Convert the HSW pch_pfit.force_thru to a proper state variable
with readout and accompanying pipe conf check. Makes the logic
a bit more straightforward, and hopefully prevents some
breakage in the future.

'force_thru' is probably not the best name for this, but I
didn't manage to come up with anything better either, so I
left it alone.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425162906.5242-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Fix fastset vs. pfit on/off on HSW EDP transcoder

On HSW the pipe A panel fitter lives inside the display power well,
and the input MUX for the EDP transcoder needs to be configured
appropriately to route the data through the power well as needed.
Changing the MUX setting is not allowed while the pipe is active,
so we need to force a full modeset whenever we need to change it.

Currently we may end up doing a fastset which won't change the
MUX settings, but it will drop the power well reference, and that
kills the pipe.

Cc: stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d19f958db23c ("drm/i915: Enable fastset for non-boot modesets.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425162906.5242-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: disable framebuffer compression on GeminiLake

On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.

The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes: fd7d6c5c8f3e ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com

drm/hdcp: gathering hdcp related code into drm_hdcp.c

Considering the significant size of hdcp related code in drm, all
hdcp related codes are moved into separate file called drm_hdcp.c.

v2:
  Rebased.
v2:
  Rebased.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-7-ramalingam.c@intel.com

drm/i915: SRM revocation check for HDCP1.4 and 2.2

DRM HDCP SRM revocation check services are used from I915 for HDCP1.4
and 2.2 revocation check during the respective authentication flow.

v2:
  Rebased.
v3:
  %s/*_ksvs_revocated/*_check_ksvs_revoked [Daniel]
  unwanted noise is removed.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-6-ramalingam.c@intel.com

drm: revocation check at drm subsystem

On every hdcp revocation check request SRM is read from fw file
/lib/firmware/display_hdcp_srm.bin

SRM table is parsed and stored at drm_hdcp.c, with functions exported
for the services for revocation check from drivers (which
implements the HDCP authentication)

This patch handles the HDCP1.4 and 2.2 versions of SRM table.

v2:
  moved the uAPI to request_firmware_direct() [Daniel]
v3:
  kdoc added. [Daniel]
  srm_header unified and bit field definitions are removed. [Daniel]
  locking improved. [Daniel]
  vrl length violation is fixed. [Daniel]
v4:
  s/__swab16/be16_to_cpu [Daniel]
  be24_to_cpu is done through a global func [Daniel]
  Unused variables are removed. [Daniel]
  unchecked return values are dropped from static funcs [Daniel]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Satyeshwar Singh <satyeshwar.singh@intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-5-ramalingam.c@intel.com

drm: generic fn converting be24 to cpu and vice versa

Existing functions for converting a 3bytes(be24) of big endian value
into u32 of little endian and vice versa are renamed as

s/drm_hdcp2_seq_num_to_u32/drm_hdcp_be24_to_cpu
s/drm_hdcp2_u32_to_seq_num/drm_hdcp_cpu_to_be24

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-4-ramalingam.c@intel.com

drm/i915: debugfs: HDCP2.2 capability read

Adding the HDCP2.2 capability of HDCP src and sink info into debugfs
entry "i915_hdcp_sink_capability"

This helps the userspace tests to skip the HDCP2.2 test on non HDCP2.2
sinks.

v2:
  Rebased.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-3-ramalingam.c@intel.com

drm: move content protection property to mode_config

Content protection property is created once and stored in
drm_mode_config. And attached to all HDCP capable connectors.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-2-ramalingam.c@intel.com

drm/i915: Seal races between async GPU cancellation, retirement and signaling

Currently there is an underlying assumption that i915_request_unsubmit()
is synchronous wrt the GPU -- that is the request is no longer in flight
as we remove it. In the near future that may change, and this may upset
our signaling as we can process an interrupt for that request while it
is no longer in flight.

CPU0 CPU1
intel_engine_breadcrumbs_irq
(queue request completion)
i915_request_cancel_signaling
... ...
i915_request_enable_signaling
dma_fence_signal

Hence in the time it took us to drop the lock to signal the request, a
preemption event may have occurred and re-queued the request. In the
process, that request would have seen I915_FENCE_FLAG_SIGNAL clear and
so reused the rq->signal_link that was in use on CPU0, leading to bad
pointer chasing in intel_engine_breadcrumbs_irq.

A related issue was that if someone started listening for a signal on a
completed but no longer in-flight request, we missed the opportunity to
immediately signal that request.

Furthermore, as intel_contexts may be immediately released during
request retirement, in order to be entirely sure that
intel_engine_breadcrumbs_irq may no longer dereference the intel_context
(ce->signals and ce->signal_link), we must wait for irq spinlock.

In order to prevent the race, we use a bit in the fence.flags to signal
the transfer onto the signal list inside intel_engine_breadcrumbs_irq.
For simplicity, we use the DMA_FENCE_FLAG_SIGNALED_BIT as it then
quickly signals to any outside observer that the fence is indeed signaled.

v2: Sketch out potential dma-fence API for manual signaling
v3: And the test_and_set_bit()

Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508112452.18942-1-chris@chris-wilson.co.uk

drm/i915/hangcheck: Replace hangcheck.seqno with RING_HEAD

After realising we need to sample RING_START to detect context switches
from preemption events that do not allow for the seqno to advance, we
can also realise that the seqno itself is just a distance along the ring
and so can be replaced by sampling RING_HEAD.

v2: Bonus comment for the mystery separate CS_STALL before MI_USER_INTERRUPT

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508080704.24223-1-chris@chris-wilson.co.uk

drm/i915: Reboot CI if forcewake fails

If the HW fails to ack a change in forcewake status, the machine is as
good as dead -- it may recover, but in reality it missed the mmio
updates and is now in a very inconsistent state. If it happens, we can't
trust the CI results (or at least the fails may be genuine but due to
the HW being dead and not the actual test!) so reboot the machine (CI
checks for a kernel taint in between each test and reboots if the
machine is tainted).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508115245.27790-1-chris@chris-wilson.co.uk

drm/i915/icl: Fix setting 10 bit deep color mode

There is a bug in hdmi_deep_color_possible() - we compare pipe_bpp
<= 8*3 which returns true every time for hdmi_deep_color_possible 12 bit
deep color mode test in intel_hdmi_compute_config().(Even when the
requested color mode is 10 bit through max bpc property)

Comparing pipe_bpp with bpc * 3 takes care of this condition where
requested max bpc is 10 bit, so hdmi_deep_color_possible with 12 bit
returns false when requested max bpc is 10.(Ville)

v2:Add suggested by Ville Syrjälä

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507181856.16091-1-aditya.swarup@intel.com

drm/i915: Kill PCH_KBP

For us KBP is 100% identical to SPT. Kill the redundant enum
value. Also bspec doesn't talk about KBP either, so this might
avoid some confusion when cross checking the code against the
spec.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506152627.20283-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/execlists: Don't apply priority boost for resets

Do not treat reset as a normal preemption event and avoid giving the
guilty request a priority boost for simply being active at the time of
reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507122954.6299-1-chris@chris-wilson.co.uk

drm/i915: Only reschedule the submission tasklet if preemption is possible

If we couple the scheduler more tightly with the execlists policy, we
can apply the preemption policy to the question of whether we need to
kick the tasklet at all for this priority bump.

v2: Rephrase it as a core i915 policy and not an execlists foible.
v3: Pull the kick together.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507122544.12698-1-chris@chris-wilson.co.uk

drm/i915: Stop spinning for DROP_IDLE (debugfs/i915_drop_caches)

If the user is racing a call to debugfs/i915_drop_caches with ongoing
submission from another thread/process, we may never end up idling the
GPU and be uninterruptibly spinning in debugfs/i915_drop_caches trying
to catch an idle moment.

Just flush the work once, that should be enough to park the system under
correct conditions. Outside of those we either have a driver bug or the
user is racing themselves. Sadly, because the user may be provoking the
unwanted situation we can't put a warn here to attract attention to a
probable bug.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-4-chris@chris-wilson.co.uk

drm/i915: Cancel retire_worker on parking

Replace the racy continuation check within retire_work with a definite
kill-switch on idling. The race was being exposed by gem_concurrent_blit
where the retire_worker would be terminated too early leaving us
spinning in debugfs/i915_drop_caches with nothing flushing the
retirement queue.

Although that the igt is trying to idle from one child while submitting
from another may be a contributing factor as to why  it runs so slowly...

v2: Use the non-sync version of cancel_delayed_work(), we only need to
stop it from being scheduled as we independently check whether now is
the right time to be parking.

Testcase: igt/gem_concurrent_blit
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-3-chris@chris-wilson.co.uk

drm/i915: Remove delay for idle_work

The original intent for the delay before running the idle_work was to
provide a hysteresis to avoid ping-ponging the device runtime-pm. Since
then we have also pulled in some memory management and general device
management for parking. But with the inversion of the wakeref handling,
GEM is no longer responsible for the wakeref and by the time we call the
idle_work, the device is asleep. It seems appropriate now to drop the
delay and just run the worker immediately to flush the cached GEM state
before sleeping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-2-chris@chris-wilson.co.uk

drm/i915: Flush the switch-to-kernel-context harder for DROP_IDLE

To complete the idle worker, we must complete 2 passes of wait-for-idle.
At the end of the first pass, we queue a switch-to-kernel-context and
may only idle after waiting for its completion. Speed up the flush_work
by doing the wait explicitly, which then allows us to remove the
unbounded loop trying to complete the flush_work in the next patch.

References: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Testcase: igt/gem_ppgtt/flind-and-close-vma-leak
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-1-chris@chris-wilson.co.uk

drm/i915/icl: Set GCP_COLOR_INDICATION only for 10/12 bit deep color

v2: Fix commit msg to reflect why issue occurs(Jani)
Set GCP_COLOR_INDICATION only when we set 10/12 bit deep color.

Changing settings from 10/12 bit deep color to 8 bit(& vice versa)
doesn't work correctly using xrandr max bpc property. When we
connect a monitor which supports deep color, the highest deep color
setting is selected; which sets GCP_COLOR_INDICATION. When we change
the setting to 8 bit color, we still set GCP_COLOR_INDICATION which
doesn't allow the switch back to 8 bit color.

v3,4: Add comments & drop changes in intel_hdmi_compute_config(Ville)
Since HSW+, GCP_COLOR_INDICATION is not required for 8bpc.

Drop the changes in intel_hdmi_compute_config as desired_bpp
is needed to change values for pipe_bpp based on bw_constrained flag.

v5: Fix missing logical && in condition for setting GCP_COLOR_INDICATION.

v6: Fix comment formatting (Ville)

v7: Add reviewed by Ville

v8: Set GCP_COLOR_INDICATION based on spec:
For Gen 7.5 or later platforms, indicate color depth only for deep
color modes. Bspec: 8135,7751,50524

Pre DDI platforms, indicate color depth if deep color is supported
by sink. Bspec: 7854

Exception: CHERRYVIEW behaves like Pre DDI platforms.
Bspec: 15975

Check pipe_bpp is less than bpp * 3 in hdmi_deep_color_possible,
to not set 12 bit deep color for every modeset. This fixes the issue
where 12 bit color was selected even when user selected 10 bit.(Ville)

v9: Maintain a consistent behavior for all platforms and support
GCP_COLOR_INDICATION only when we are in deep color mode. Remove
hdmi_sink_is_deep_color() - no longer needed as checking pipe_bpp > 24
takes care of the deep color mode scenario.

Separate patch for fixing switch from 12 bit to 10 bit deep color
mode.

Co-developed-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429230811.9983-1-aditya.swarup@intel.com

drm/i915: Assert the local engine->wakeref is active

Due to the asynchronous tasklet and recursive GT wakeref, it may happen
that we submit to the engine (underneath it's own wakeref) prior to the
central wakeref being marked as taken. Switch to checking the local wakeref
for greater consistency.

Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503115225.30831-3-chris@chris-wilson.co.uk

drm/i915: Prefer checking the wakeref itself rather than the counter

The counter goes to zero at the start of the parking cycle, but the
wakeref itself is held until the end. Likewise, the counter becomes one
at the end of the unparking, but the wakeref is taken first. If we check
the wakeref instead of the counter, we include the unpark/unparking time
as intel_wakeref_is_active(), and do not spuriously declare inactive if
we fail to park (i.e. the parking and wakeref drop is postponed).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503115225.30831-2-chris@chris-wilson.co.uk

drm/i915: Assert breadcrumbs are correctly ordered in the signal handler

Inside the signal handler, we expect the requests to be ordered by their
breadcrumb such that no later request may be complete if we find an
earlier incomplete. Add an assert to check that the next breadcrumb
should not be logically before the current.

v2: Move the overhanging line into its own function and reuse it after
doing the insertion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503152214.26517-1-chris@chris-wilson.co.uk

drm/i915: Acquire the signaler's timeline HWSP last

Acquiring the signaler's timeline takes an active reference to their
HWSP that we would like to avoid if possible, so take it after
performing all of our allocations required to set up the fencing. The
acquisition also provides the final check that the target has not
already signaled allowing us to avoid the semaphore at the last moment.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503140239.32668-1-chris@chris-wilson.co.uk

drm/i915: Move the hsw/bdw pc8 code to intel_runtime_pm.c

hsw_enable_pc8()/hsw_disable_pc8() are more less equivalent to
the display core init/unit functions of later platforms. Relocate
the hsw/bdw code into intel_runtime_pm.c so that it sits next to
its cousins.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503193143.28240-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Replace intel_ddi_pll_init()

intel_ddi_pll_init() is an anachronism. Rename it to
hsw_assert_cdclk() and move it to the power domain init code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503193143.28240-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Move w/a 0477/WaDisableIPC:skl into intel_init_ipc()

Move the w/a to disable IPC on SKL closer to the actual code
that implements IPS. Otherwise I just end up confused as to
what is excluding SKL from considerations.

IMO this makes more sense anyway since the hw does have the
feature, we're just not supposed to use it.

And this also makes us actually disable IPC in case eg. the
BIOS enabled it when it shouldn't have.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-3-ville.syrjala@linux.intel.com

drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl

Drop WaIncreaseLatencyIPCEnabled/Display w/a #1140 for
early cnl steppings.

v2: Drop the IS_GEN9_BC() change since other related
    parts of the code also use the KBL||CFL pattern

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-2-ville.syrjala@linux.intel.com

drm/i915: Document that we implement WaIncreaseLatencyIPCEnabled

Display w/a #1141 is also known as WaIncreaseLatencyIPCEnabled.
Add that to the comment.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-1-ville.syrjala@linux.intel.com

drm/i915: Disable semaphore busywaits on saturated systems

Asking the GPU to busywait on a memory address, perhaps not unexpectedly
in hindsight for a shared system, leads to bus contention that affects
CPU programs trying to concurrently access memory. This can manifest as
a drop in transcode throughput on highly over-saturated workloads.

The only clue offered by perf, is that the bus-cycles (perf stat -e
bus-cycles) jumped by 50% when enabling semaphores. This corresponds
with extra CPU active cycles being attributed to intel_idle's mwait.

This patch introduces a heuristic to try and detect when more than one
client is submitting to the GPU pushing it into an oversaturated state.
As we already keep track of when the semaphores are signaled, we can
inspect their state on submitting the busywait batch and if we planned
to use a semaphore but were too late, conclude that the GPU is
overloaded and not try to use semaphores in future requests. In
practice, this means we optimistically try to use semaphores for the
first frame of a transcode job split over multiple engines, and fail if
there are multiple clients active and continue not to use semaphores for
the subsequent frames in the sequence. Periodically, we try to
optimistically switch semaphores back on whenever the client waits to
catch up with the transcode results.

With 1 client, on Broxton J3455, with the relative fps normalized by %cpu:

x no semaphores
+ drm-tip
* patched
+------------------------------------------------------------------------+
|                                                    *                   |
|                                                    *+                  |
|                                                    **+                 |
|                                                    **+  x              |
|                                x               *  +**+  x              |
|                                x  x       *    *  +***x xx             |
|                                x  x       *    * *+***x *x             |
|                                x  x*   +  *    * *****x *x x           |
|                         +    x xx+x*   + ***   * ********* x   *       |
|                         +    x xx+x*   * *** +** ********* xx  *       |
|    *   +         ++++*  +    x*x****+*+* ***+*************+x*  *       |
|*+ +** *+ + +* + *++****** *xxx**********x***+*****************+*++    *|
|                                   |__________A_____M_____|             |
|                           |_______________A____M_________|             |
|                                 |____________A___M________|            |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       2.60475       3.50941       3.31123     3.2143953    0.21117399
+ 120        2.3826       3.57077       3.25101     3.1414161    0.28146407
Difference at 95.0% confidence
-0.0729792 +/- 0.0629585
-2.27039% +/- 1.95864%
(Student's t, pooled s = 0.248814)
* 120       2.35536       3.66713        3.2849     3.2059917    0.24618565
No difference proven at 95.0% confidence

With 10 clients over-saturating the pipeline:

x no semaphores
+ drm-tip
* patched
+------------------------------------------------------------------------+
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                    xx ***       |
|                     ++                                    xx ***       |
|                     ++                                    xxx***       |
|                     ++                                    xxx***       |
|                    +++                                    xxx***       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    ++++                                   xx****       |
|                   +++++                                   xx****       |
|                   +++++                                 x x******      |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xx********     |
|                  ++++++                               xxxx********     |
|                  ++++++                               xxxx********     |
|                ++++++++                             xxxxx*********     |
|+ +  +        + ++++++++                           xxx*xx**********x*  *|
|                                                         |__A__|        |
|                 |__AM__|                                               |
|                                                            |__A_|      |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       2.47855        2.8972       2.72376     2.7193402   0.074604933
+ 120       1.17367       1.77459       1.71977     1.6966782   0.085850697
Difference at 95.0% confidence
-1.02266 +/- 0.0203502
-37.607% +/- 0.748352%
(Student's t, pooled s = 0.0804246)
* 120       2.57868       3.00821       2.80142     2.7923878   0.058646477
Difference at 95.0% confidence
0.0730476 +/- 0.0169791
2.68622% +/- 0.624383%
(Student's t, pooled s = 0.0671018)

Indicating that we've recovered the regression from enabling semaphores
on this saturated setup, with a hint towards an overall improvement.

Very similar, but of smaller magnitude, results are observed on both
Skylake(gt2) and Kabylake(gt4). This may be due to the reduced impact of
bus-cycles, where we see a 50% hit on Broxton, it is only 10% on the big
core, in this particular test.

One observation to make here is that for a greedy client trying to
maximise its own throughput, using semaphores is the right choice. It is
only the holistic system-wide view that semaphores of one client
impacts another and reduces the overall throughput where we would choose
to disable semaphores.

The most noticeable negactive impact this has is on the no-op
microbenchmarks, which are also very notable for having no cpu bus load.
In particular, this increases the runtime and energy consumption of
gem_exec_whisper.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190504070707.30902-1-chris@chris-wilson.co.uk

drm/i915: Use mul_u32_u32() more

We have a lot of '(u64)foo * bar' everywhere. Replace with
mul_u32_u32() to avoid gcc failing to use a regular 32x32->64
multiply for this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408152702.4153-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Allow ICL pipe "HDR mode" when the cursor is visible

Turns out the cursor is compatible with the pipe "HDR mode". It's
only the actual SDR planes that get entirely bypassed during
blending. So let's ignore the cursor when checking if we have
any planes active that aren't HDR compatible. This fixes the
regressions in the kms_cursor_crc and kms_plane_cursor tests.

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110579
Fixes: 09b25812db10 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502200607.14504-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Move the PIPEMISC write the correct place

I fumbled the PIPEMISC write into the wrong place. It only gets
called for fastsets, but since value needs to be updated based on
the set of active planes it needs to be done for all plane updates.
Move it to the correct spot.

The symptoms include SDR planes never showing up if a previous
modeset/fastset left the pipe in HDR mode. This was immediately
obvious when running the kms_plane pixel format tests. Unfortunately
the test didn't realize it was scanning out pure black all the time
and declared success anyway.

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Fixes: 09b25812db10 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502200607.14504-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Delay semaphore submission until the start of the signaler

Currently we submit the semaphore busywait as soon as the signaler is
submitted to HW. However, we may submit the signaler as the tail of a
batch of requests, and even not as the first context in the HW list,
i.e. the busywait may start spinning far in advance of the signaler even
starting.

If we wait until the request before the signaler is completed before
submitting the busywait, we prevent the busywait from starting too
early, if the signaler is not first in submission port.

To handle the case where the signaler is at the start of the second (or
later) submission port, we will need to delay the execution callback
until we know the context is promoted to port0. A challenge for later.

Fixes: e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchroni
sation on gen8+")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-9-chris@chris-wilson.co.uk

drm/i915/hangcheck: Track context changes

Given sufficient preemption, we may see a busy system that doesn't
advance seqno while performing work across multiple contexts, and given
sufficient pathology not even notice a change in ACTHD. What does change
between the preempting contexts is their RING, so take note of that and
treat a change in the ring address as being an indication of forward
progress.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-1-chris@chris-wilson.co.uk

drm/i915: Leave engine parking to the engines

Drop the check in GEM parking that the engines were already parked. The
intention here was that before we dropped the GT wakeref, we were sure
that no more interrupts could be raised -- however, we have already
dropped the wakeref by this point and the warning is no longer valid.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502150024.16636-2-chris@chris-wilson.co.uk

drm/i915/execlists: Flush the tasklet on parking

Tidy up the cleanup sequence by always ensure that the tasklet is
flushed on parking (before we cleanup). The parking provides a
convenient point to ensure that the backend is truly idle.

v2: Do the full check for idleness before parking, to be sure we flush
any residual interrupt.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503080942.30151-1-chris@chris-wilson.co.uk

drm/i915/guc: Fix runtime suspend

We are not allowed to rpm_get() inside the runtime-suspend callback, so
split the intel_uc_suspend() into the core that assumes the caller holds
the wakeref (intel_uc_runtime_suspend), and one that acquires the wakeref
as necessary (intel_uc_suspend).

Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502203009.15727-1-chris@chris-wilson.co.uk

drm/i915: extract intel_gmbus.h from i915_drv.h and rename intel_i2c.c

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

While at it, rename intel_i2c.c to intel_gmbus.c and the functions to
intel_gmbus_*.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5834b8fbbfd4ac2e3d0159e69c87f6926066f537.1556809195.git.jani.nikula@intel.com

drm/i915: move more generic utils to i915_utils.h

Reduce clutter from i915_drv.h and intel_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c197872384fc35442b738c21ba0da9336e02a85.1556809195.git.jani.nikula@intel.com

drm/i915: make i915_utils.h self-contained

And ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/69bcebefa6d8689d4a962394b0c6db04904354ed.1556809195.git.jani.nikula@intel.com

drm/i915: move i915_vgacntrl_reg() where needed

Reduce clutter from i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d30a79d008b875f708f5acf7924f9ca8ab06b575.1556809195.git.jani.nikula@intel.com

drm/i915: extract i915_debugfs.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2843b028d65e118dc40316aa84bf620a93f6c67b.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_acpi.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9bc1317a67df0b9d019eca5b36f474b76a1cad26.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_lpe_audio.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9101a58b9f10bcf11332175e17b6e6e45f4ebd17.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_dpio_phy.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/876a1671a84c6839bcafdf276cf9c4e1da6c631c.1556809195.git.jani.nikula@intel.com

drm/i915/csr: move CSR version macros to intel_csr.h

Reduce clutter from i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8222df3f559b056387b5c7e6e04a878cbf8b4e2e.1556809195.git.jani.nikula@intel.com

drm/i915: remove unused/stale macros and comments from intel_drv.h

Reduce clutter from intel_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/963ba7fa0111135c3e796bfc9f86d6e33724758e.1556809195.git.jani.nikula@intel.com

drm/i915: move ranges to intel_display.c

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c9248b50e620e95d85b8b9252d020a547c9474a.1556809195.git.jani.nikula@intel.com

drm/i915/dsi: move operation mode types to intel_dsi.h

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72de677e844220d8522a836aae206c278ea45284.1556809195.git.jani.nikula@intel.com

drm/i915/dvo: move DVO chip types to intel_dvo.c

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95203dbf844061da95f33614d0cb61533a11fdd4.1556809195.git.jani.nikula@intel.com

drm/i915: add single combo phy init/unit functions

Work on the principle that files should prefer not to expose platform
specific functions.

v2, v3: Rebase

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502145234.7002-1-jani.nikula@intel.com

drm/i915: Tune down WARN about incorrect VBT TC legacy flag

Looks like VBT contains again the wrong information about a port's TypeC
legacy vs. DP-alt/TBT-alt type. There is no further issues after we
notice this and fix it up, so tune down the WARN to be a a DRM_ERROR.

This also avoids CI tainting the kernel and stopping the test run.

v2:
- Update also code coment accordingly. (Jani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110578
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502101754.29219-1-imre.deak@intel.com

drm/i915: Include fence signaled bit in print_request()

Show the fence flags view of request completion in addition to the
normal hwsp check and whether signaling is enabled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-2-chris@chris-wilson.co.uk

drm/i915/icl: Add missing combo PHY lane power setup

This step of the BSpec combo PHY port enabling is missing, so add it
now.

v2:
- Rebased on the new fixed v2 version of the helper.
v3:
- Use intel_ instead of icl_ prefix. (Jani)

Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425185253.3197-2-imre.deak@intel.com

drm/i915/icl: Factor out combo PHY lane power setup helper

Factor out the combo PHY lane power configuration code to a separate
helper; it will be also needed by the next patch adding the same
configuration for DDI ports.

Add support for DDI ports and lane reversal as preparation for the next
patch.

The PWR_DOWN_LN_1 value is unspecified in the BSpec register description
so remove it.

v2:
- Fix up the wrong assumption that the encodings are the same for DDI
  and DSI ports. (Jani)
v3:
- Use intel_ instead of icl_ prefix. (Jani)
- Add required headers to intel_combo_phy.h after the upstream header
  refactoring.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> (v2)
Link: https://patchwork.freedesktop.org/patch/msgid/20190425185253.3197-1-imre.deak@intel.com

drm/i915: hsw+ audio regs are per-transocder

s/pipe/transcoder/ when dealing with hsw+ audio registers. This
won't actually make any real difference since there is no audio
on the EDP transcoder. But this should avoid a bit of confusion
when cross checking against the spec.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430142901.7302-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Don't skip audio enable if ELD is bogus

We've already committed to enabling audio when intel_audio_codec_enable()
is called. We can't back out even if the ELD has turned sour in the
meantime. So just spew some debug log and plow ahead. Otherwise the
state checker gets unhappy when audio isn't enabled when it is
expected to be.

I suppose we really ought to precompute the ELD as well, but
let's just toss in a FIXME for the future.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103841
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430142901.7302-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/csr: alpha_support doesn't depend on csr or vice versa

Debug logging should not be dependent on alpha support flag.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429142253.15882-1-jani.nikula@intel.com

drm/i915: Corrupt DSI picture fix for GeminiLake

Currently due to regression CI machine displays show corrupt picture.
Problem is when CDCLK is as low as 79200, picture gets unstable, while
DSI and DE pll values were confirmed to be correct.  Limiting to 158400
as agreed with Ville.

We could not come up with any better solution yet, as PLL divider values
both for MIPI(DSI PLL) and CDCLK(DE PLL) are correct, however seems that
due to some boundary conditions, when clocking is too low we get wrong
timings for DSI display.  Similar workaround exists for VLV though, so
just took similar condition into use. At least that way GLK platform
will start to be usable again, with current drm-tip.

v2: Fixed commit subject as suggested.

v3: Added generic bugs(crc failures, screen not init
for GLK DSI which might be affected).

v4: Added references tag for bugs affected.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=109267
References: https://bugs.freedesktop.org/show_bug.cgi?id=103184
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430125119.7478-1-stanislav.lisovskiy@intel.com

drm/i915: Complete both freed-object passes before draining the workqueue

The workqueue code complains viciously if we try to queue more work onto
the queue while attampting to drain it. As we asynchronously free
objects and defer their enqueuing with RCU, it is quite tricky to
quiesce the system before attempting to drain the workqueue. Yet drain
we must to ensure that the worker is idle before unloading the module.

Give the freed object drain 3 whole passes with multiple rcu_barrier()
to give the defer freeing of several levels each protected by RCU and
needing a grace period before its parent can be freed, ultimately
resulting in a GEM object being freed after another RCU period.

A consequence is that it will make module unload even slower.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110550
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501135753.8711-1-chris@chris-wilson.co.uk

drm/i915: Move the engine->destroy() vfunc onto the engine

Make the engine responsible for cleaning itself up!

This removes the i915->gt.cleanup vfunc that has been annoying the
casual reader and myself for the last several years, and helps keep a
future patch to add more cleanup tidy.

v2: Assert that engine->destroy is set after the backend starts
allocating its own state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501103204.18632-1-chris@chris-wilson.co.uk