Jimmy Rentz [Sun, 17 Apr 2011 20:15:09 +0000 (16:15 -0400)]
drm/nouveau: Fix a crash at card takedown for NV40 and older cards
NV40 and older cards (pre NV50) reserve a vram bo for the vga memory at
card init. This bo is then freed at card shutdown. The problem is that
the ttm bo vram manager was already freed. So a crash occurs when the
vga bo is freed. The fix is to free the vga bo prior to freeing the ttm
bo vram manager. There might be other solutions but this seemed the
simplest to me.
Signed-off-by: Jimmy Rentz <jb17bsome@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Jimmy Rentz [Sun, 17 Apr 2011 20:15:03 +0000 (16:15 -0400)]
drm/nouveau: Free nv04 instmem ramin heap at card takedown
Add a missing nv04 instmem ramin heap shutdown call.
Signed-off-by: Jimmy Rentz <jb17bsome@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 14 Apr 2011 05:02:03 +0000 (15:02 +1000)]
drm/nva3: somewhat improve clock reporting
Definitely not 100% correct, but, for the configurations I've seen used
it'll read back the correct clocks now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 14 Apr 2011 01:25:26 +0000 (11:25 +1000)]
drm/nouveau: pull refclk from vbios on limits 0x40 boards
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 13 Apr 2011 08:33:15 +0000 (18:33 +1000)]
drm/nv40/gr: oops, fix random bits getting set in engine obj
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Mon, 11 Apr 2011 19:43:23 +0000 (20:43 +0100)]
drm/nv50: improve nv50_pm_get_clock()
Many of the nv50 cards have their shader and/or memory pll
disabled at some stage.
This patch addresses those cases, so that the function
returns the correct frequency.
When the shader pll is disabled, the blob reports 2*core clock
Whereas for memory, the data stored in the vbios. This action
is incorrect as some vbioses store a clock value that is less
than the refference clock of the pll.
Thus we are reporting the reff_clk as it is the frequency the
pll actually operates
v2 - Convert NV_INFO() messages to NV_DEBUG()
Provide more information in the actuall message
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 11 Apr 2011 22:55:44 +0000 (00:55 +0200)]
drm/nouveau/pm: fix compilation failure when CONFIG_POWER_SUPPLY is not set
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Reported-by: Stratos Psomadakis <psomas@ece.ntua.gr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 13 Apr 2011 03:55:17 +0000 (13:55 +1000)]
drm/nvc0/fifo: stick user area into a gpuobj rather than a bo
Contents will now be preserved across a suspend, unlike a pinned bo
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 13 Apr 2011 02:55:36 +0000 (12:55 +1000)]
drm/nvc0/gr: no need to store context in graph_fini()
PFIFO kickoff should have handled this for us.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Apr 2011 09:38:06 +0000 (19:38 +1000)]
drm/nvc0/fifo: restore context table on resume
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Apr 2011 08:51:39 +0000 (18:51 +1000)]
drm/nvc0/fifo: kick channels off during suspend
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Apr 2011 08:50:36 +0000 (18:50 +1000)]
drm/nvc0/gr: better handling of fuc firmware
Allows per-chipset firmware to be installed, and keeps a copy in memory
for suspend/resume purposes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Apr 2011 05:20:22 +0000 (15:20 +1000)]
drm/nv50: support PMPEG on original nv50
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Apr 2011 05:19:54 +0000 (15:19 +1000)]
drm/nv50: rename nv84_mpeg to nv50_mpeg
In preparation for adding 0x50 support.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Apr 2011 06:10:00 +0000 (16:10 +1000)]
drm/nv84: add support for PMPEG
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Apr 2011 06:08:24 +0000 (16:08 +1000)]
drm/nv40/vpe: add support for PMPEG
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 06:10:08 +0000 (16:10 +1000)]
drm/nvc0: implement support for copy engines
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 18 Mar 2011 00:25:59 +0000 (10:25 +1000)]
drm/nva3: implement support for copy engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 03:56:05 +0000 (13:56 +1000)]
drm/nouveau: remove remnants of nouveau_pgraph_engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 03:26:35 +0000 (13:26 +1000)]
drm/nouveau: fix suspend failure path to reinitialise all engines
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 03:17:25 +0000 (13:17 +1000)]
drm/nouveau: remove remnants of nouveau_pgraph_engine from nouveau_channel
The nouveau_wait_for_idle() call should hopefully not have been actually
necessary, we *do* wait for the channel to go idle already. If it's
an issue somehow, the chipset-specific hooks can wait for idle themselves
before taking the lock.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 03:10:45 +0000 (13:10 +1000)]
drm/nouveau: move set_tile_region to nouveau_exec_engine
In the very least VPE (PMPEG and friends) also has this style of tile
region regs, lets make them just work if/when they get added.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 03:03:56 +0000 (13:03 +1000)]
drm/nv04/gr: move to exec engine interfaces
Like nv10-nv50, needs cleanup.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 02:50:55 +0000 (12:50 +1000)]
drm/nv10/gr: move to exec engine interfaces
Like nv20-nv50, needs cleanup.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 02:32:03 +0000 (12:32 +1000)]
drm/nv20-nv30/gr: move to exec engine interface
A bit of cleanup done along the way, but, like nv40/nv50, needs more.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 01:33:21 +0000 (11:33 +1000)]
drm/nv40/gr: move to exec engine interfaces
Like nv50, this needs a good cleanup.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 00:59:53 +0000 (10:59 +1000)]
drm/nvc0/gr: move to exec engine interfaces
Much nicer to do that nv50, the code was pretty much written to expect
such a change in the future.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Mar 2011 23:50:18 +0000 (09:50 +1000)]
drm/nv50/gr: move to exec engine interfaces
This needs a massive cleanup, but to catch bugs from the interface changes
vs the engine code cleanup, this will be done later.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Mar 2011 05:40:43 +0000 (15:40 +1000)]
drm/nouveau: working towards a common way to represent engines
There's lots of more-or-less independant engines present on NVIDIA GPUs
these days, and we generally want to perform the same operations on them.
Implementing new ones requires hooking into lots of different places,
the aim of this work is to make this simpler and cleaner.
NV84:NV98 PCRYPT moved over as a test.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Mar 2011 03:55:49 +0000 (13:55 +1000)]
drm/nouveau: remove some unused members from dev_priv
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Mar 2011 03:44:16 +0000 (13:44 +1000)]
drm/nouveau: move engine object creation into per-engine hooks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Mar 2011 00:39:44 +0000 (10:39 +1000)]
drm/nouveau: use static vidshift of 2 on volt 0x30 tables
Explanation is in the commit. If anyone has an example of where this is
*not* the case, please report it!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sun, 27 Mar 2011 16:13:11 +0000 (18:13 +0200)]
drm/nouveau: improve memtiming table parsing
Improves the parsing of the memory timing table on NV50-NV98revA1 chipsets.
Added stepping to drm_nouveau_private to make sure newer NV98 (105M) is
zero rather than incorrect.
Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 28 Mar 2011 23:28:24 +0000 (09:28 +1000)]
drm/nvc0: decode gpc/hubclient on vm fault
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 28 Mar 2011 22:57:34 +0000 (08:57 +1000)]
drm/nvc0: more vm fault reasons
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 28 Mar 2011 14:52:59 +0000 (00:52 +1000)]
drm/nvc0: more vm fault engines
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Sat, 19 Mar 2011 23:31:54 +0000 (23:31 +0000)]
drm/nouveau: Fix missing whitespace checkpatch.pl errors.
This patch fixes messages such as
ERROR: space required after that ','
ERROR: spaces required around that '='
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Emil Velikov [Sat, 19 Mar 2011 23:31:53 +0000 (23:31 +0000)]
drm/nouveau: Fix brace placement checkpatch.pl errors.
Fix 'ERROR: that open brace { should be on the previous line'
Fix 'ERROR: else should follow close brace }'
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Emil Velikov [Sat, 19 Mar 2011 23:31:52 +0000 (23:31 +0000)]
drm/nouveau: Clean up trailing whitespace and C99-style comments.
Fix 'ERROR: trailing whitespace',
Fix 'ERROR: do not use C99 // comments'
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Emil Velikov [Sat, 19 Mar 2011 23:31:51 +0000 (23:31 +0000)]
drm/nouveau: Fix indentation-related checkpatch.pl error messages.
Fix 'ERROR: code indent should use tabs where possible'
Fix 'ERROR: space required before the open parenthesis ('
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Martin Peres [Sat, 19 Mar 2011 21:44:35 +0000 (22:44 +0100)]
drm/nouveau: name the boot perflvl "boot"
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Mon, 9 May 2011 04:37:10 +0000 (14:37 +1000)]
drm/mxm: fix Kconfig options for when to build MXM WMI driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 9 May 2011 03:23:18 +0000 (13:23 +1000)]
Merge remote branch 'korg/drm-nvidia-switch-fixes' into drm-core-next
* korg/drm-nvidia-switch-fixes:
mxm/wmi: add MXMX interface entry point.
nouveau: add optimus detection to DSM code.
vgaarb: use bridges to control VGA routing where possible.
nouveau/acpi: hook up to the MXM method for mux switching.
platform/x86: add MXM WMI driver.
Alex Deucher [Wed, 4 May 2011 15:14:44 +0000 (15:14 +0000)]
drm/radeon/kms: fix some logic errors in combios i2c mapping
The virtual i2c to real i2c channel mappings weren't setting
the right id in some cases.
Spotted by: Andrew Randrianasulu
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 9 May 2011 01:40:25 +0000 (11:40 +1000)]
mxm/wmi: add MXMX interface entry point.
The MXMX method appears to be a mutex of some sort.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Williamson [Mon, 2 May 2011 00:49:33 +0000 (18:49 -0600)]
vga_switcheroo: Remove unbalanced pci_enable_device
This is unbalanced and probably more fitting for the client
to take care of. Remove it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 22 Mar 2011 04:10:27 +0000 (14:10 +1000)]
nouveau: add optimus detection to DSM code.
optimus has another DSM GUID, so we check for its existance,
also allow the BIOS stuff is we find it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 1 Jun 2010 05:32:24 +0000 (15:32 +1000)]
vgaarb: use bridges to control VGA routing where possible.
So in a lot of modern systems, a GPU will always be below a parent bridge that won't share with any other GPUs. This means VGA arbitration on those GPUs can be controlled by using the bridge routing instead of io/mem decodes.
The problem is locating which GPUs share which upstream bridges. This patch attempts to identify all the GPUs which can be controlled via bridges, and ones that can't. This patch endeavours to work out the bridge sharing semantics.
When disabling GPUs via a bridge, it doesn't do irq callbacks or touch the io/mem decodes for the gpu.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 6 Dec 2010 02:57:45 +0000 (12:57 +1000)]
nouveau/acpi: hook up to the MXM method for mux switching.
this hooks up nouveau to the MXM mux switching method.
With this in place I can switch the LVDS MUX on my T410s,
I expect we need a bit more work for other laptops.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 6 Dec 2010 02:43:33 +0000 (12:43 +1000)]
platform/x86: add MXM WMI driver.
MXM is a laptop graphics card form-factor + interface specification,
this adds an initial stub driver to talk to the MXM WMI interface.
The only method used is the MUX switching method needed to do switchable
graphics on the nvidia chipsets.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Alex Deucher [Tue, 3 May 2011 23:47:44 +0000 (19:47 -0400)]
drm/radeon/kms: fix up r1xx-rs4xx i2c buses
Fix the vbios mapping and only add the actual
buses that the cards have. The existing code was
mostly correct. Just clean up a few cases on r2xx/r3xx
and document that buses the hw actually has.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 3 May 2011 17:32:36 +0000 (13:32 -0400)]
drm/radeon/kms: set i2c adapter class to I2C_CLASS_DDC
The most common use of the radeon i2c buses is for ddc.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 3 May 2011 16:44:54 +0000 (12:44 -0400)]
drm/radeon/kms: add support for thermal chips on combios asics
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 4 May 2011 03:08:58 +0000 (13:08 +1000)]
drm/fb: fix CONFIG_DRM=m && CONFIG_FB=n
The previous commit to move the parsing into the core drm created a
new situation and a soft dependency on the CONFIG_FB. We really don't
want to make this a hard dependency so just wrap the one place that
actually needs an fb symbol.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Sun, 17 Apr 2011 06:43:32 +0000 (07:43 +0100)]
drm: Export the command-line mode parser
In the absence of configuration data for providing the fixed mode for
a panel, I would like to be able to pass such modes along a separate
module paramenter. To do so, I then need to parse a modeline from a
string, which drm is already capable of. Export that capability to the
drivers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Joe Perches [Mon, 18 Apr 2011 03:35:52 +0000 (20:35 -0700)]
drm: Verify debug message arguments
Add __attribute__((format (printf, 4, 5))) to drm_ut_debug_printk
and fix fallout.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Joe Perches [Mon, 18 Apr 2011 03:35:51 +0000 (20:35 -0700)]
drm: Create and use drm_err
Reduce drm text size ~1% by using drm_err and
printf extension %pV to emit error messages.
Remove unused macro DRM_MEM_ERROR.
$ size drivers/gpu/drm/built-in.o*
text data bss dec hex filename
361159 9663 256 371078 5a986 drivers/gpu/drm/built-in.o.new
365416 9663 256 375335 5ba27 drivers/gpu/drm/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 27 Apr 2011 16:56:31 +0000 (12:56 -0400)]
drm/radeon/kms: remove some underscan leftovers
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Fri, 22 Apr 2011 10:03:57 +0000 (11:03 +0100)]
drm: Take lock around probes for drm_fb_helper_hotplug_event
We need to hold the dev->mode_config.mutex whilst detecting the output
status. But we also need to drop it for the call into
drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when
attaching the fbcon.
Failure to do so exposes a race with normal output probing. Detected by
adding some warnings that the mutex is held to the backend detect routines:
[ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]()
[ 17.772458] Hardware name: Latitude E6400
[ 17.772460] Modules linked in: ....
[ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W 2.6.38.4-custom.2 #8
[ 17.772584] Call Trace:
[ 17.772591] [<
ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c
[ 17.772603] [<
ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915]
[ 17.772612] [<
ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper]
[ 17.772619] [<
ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper]
[ 17.772625] [<
ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper]
[ 17.772633] [<
ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper]
[ 17.772638] [<
ffffffff81193c01>] ? cfq_init_queue+0x247/0x345
[ 17.772644] [<
ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper]
[ 17.772648] [<
ffffffff8105b540>] ? process_one_work+0x193/0x28e
[ 17.772652] [<
ffffffff8105c6bc>] ? worker_thread+0xef/0x172
[ 17.772655] [<
ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[ 17.772658] [<
ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[ 17.772663] [<
ffffffff8105f767>] ? kthread+0x7a/0x82
[ 17.772668] [<
ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10
[ 17.772671] [<
ffffffff8105f6ed>] ? kthread+0x0/0x82
[ 17.772674] [<
ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10
Reported-by: Frederik Himpe <fhimpe@telenet.be>
References: https://bugs.freedesktop.org/show_bug.cgi?id=36394
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jesse Barnes [Fri, 15 Apr 2011 20:48:57 +0000 (13:48 -0700)]
drm: parse color format support for digital displays
EDID 1.4 digital displays report the color spaces they support in the
features block. Add support for grabbing this data and stuffing it into
the display_info struct for driver use.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jesse Barnes [Fri, 15 Apr 2011 19:49:23 +0000 (12:49 -0700)]
drm: add bit depth parsing
EDID 1.4 digital monitors report the bit depth supported in the input
field. Add support for parsing this out and storing the info in the
display_info structure for use by drivers.
[airlied: tweaked to fix inter-patch dependency]
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 21 Apr 2011 21:18:32 +0000 (22:18 +0100)]
drm/i915: restore only the mode of this driver on lastclose (v2)
i915 calls the panic handler function on last close to reset the modes,
however this is a really bad idea for multi-gpu machines, esp shareable
gpus machines. So add a new entry point for the driver to just restore
its own fbcon mode.
v2: move code into fb helper, fix panic code to block mode change on
powered off GPUs.
[airlied: this hits drm core and I wrote it and it was reviewed on intel-gfx
so really I signed it off twice ;-).]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 26 Apr 2011 17:27:43 +0000 (13:27 -0400)]
drm/radeon/kms: add info query for tile pipes
needed by mesa for htile setup.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 26 Apr 2011 17:10:20 +0000 (13:10 -0400)]
drm/radeon/kms: add missing safe regs for 6xx/7xx
needed for HiS in mesa.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 21 Apr 2011 21:51:33 +0000 (07:51 +1000)]
drm: select FRAMEBUFFER_CONSOLE_PRIMARY if we have FRAMEBUFFER_CONSOLE
Multi-gpu/switcheroo relies on this option to get the console on the
correct GPU at bootup, some distros enable it but it seems some get
it wrong.
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 27 Apr 2011 03:48:50 +0000 (20:48 -0700)]
Linux 2.6.39-rc5
Randy Dunlap [Tue, 26 Apr 2011 19:33:21 +0000 (12:33 -0700)]
init/Kconfig: fix EXPERT menu list
The EXPERT menu list was recently broken by the insertion of a
kconfig symbol (EMBEDDED) at the beginning of the EXPERT list of
kconfig items. Broken by:
commit
6a108a14fa356ef607be308b68337939e56ea94e
Author: David Rientjes <rientjes@google.com>
Date: Thu Jan 20 14:44:16 2011 -0800
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
Restore the EXPERT menu list -- don't inject a symbol (EMBEDDED)
that does not depend on EXPERT into the list.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 26 Apr 2011 18:39:37 +0000 (11:39 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: Erratum #637 workaround
amd64_edac: Factor in CC6 save area
amd64_edac: Remove node interleave warning
EDAC: Remove debugging output in scrub rate handling
Linus Torvalds [Tue, 26 Apr 2011 18:39:14 +0000 (11:39 -0700)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCH
Linus Torvalds [Tue, 26 Apr 2011 18:38:48 +0000 (11:38 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] kvm-390: Let kernel exit SIE instruction on work
[S390] dasd: check sense type in device change handler
[S390] pfault: fix token handling
[S390] qdio: reset error states immediately
[S390] fix page table walk for changing page attributes
[S390] prng: prevent access beyond end of stack
[S390] dasd: fix race between open and offline
Linus Torvalds [Tue, 26 Apr 2011 15:26:58 +0000 (08:26 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: cleanup error handling in inode.c
Btrfs: put the right bio if we have an error
Btrfs: free bitmaps properly when evicting the cache
Btrfs: Free free_space item properly in btrfs_trim_block_group()
btrfs: add missing spin_unlock to a rare exit path
Btrfs: check return value of kmalloc()
btrfs: fix wrong allocating flag when reading page
Btrfs: fix missing mutex_unlock in btrfs_del_dir_entries_in_log()
Linus Torvalds [Tue, 26 Apr 2011 15:25:16 +0000 (08:25 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/btrfs-unstable
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: do some plugging in the submit_bio threads
Borislav Petkov [Wed, 30 Mar 2011 13:42:10 +0000 (15:42 +0200)]
amd64_edac: Erratum #637 workaround
F15h CPUs may report a non-DRAM address when reporting an error address
belonging to a CC6 state save area. Add a workaround to detect this
condition and compute the actual DRAM address of the error as documented
in the Revision Guide for AMD Family 15h Models 00h-0Fh Processors.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Borislav Petkov [Mon, 21 Mar 2011 19:45:06 +0000 (20:45 +0100)]
amd64_edac: Factor in CC6 save area
F15h and later use a portion of DRAM as a CC6 storage area. BIOS
programs D18F1x[17C:140,7C:40] DRAM Base/Limit accordingly by
subtracting the storage area from the DRAM limit setting. However, in
order for edac to consider that part of DRAM too, we need to include it
into the per-node range.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Borislav Petkov [Fri, 8 Apr 2011 13:05:21 +0000 (15:05 +0200)]
amd64_edac: Remove node interleave warning
This warning was wrongfully added for a normal condition - intlvsel
actually selects the destination node when node interleaving is enabled
and it is not a mismatch. For a detailed example, see section 2.8.10.2
"Node Interleaving" in F10h BKDG.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Seth Heasley [Wed, 20 Apr 2011 17:56:20 +0000 (10:56 -0700)]
watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCH
This patch adds the TCO Watchdog DeviceIDs for the Intel Panther Point PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Linus Torvalds [Tue, 26 Apr 2011 03:38:50 +0000 (20:38 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
CIFS: Fix memory over bound bug in cifs_parse_mount_options
Linus Torvalds [Tue, 26 Apr 2011 02:01:12 +0000 (19:01 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Flush dirty pages in setattr
eCryptfs: Handle failed metadata read in lookup
eCryptfs: Add reference counting to lower files
eCryptfs: dput dentries returned from dget_parent
eCryptfs: Remove extra d_delete in ecryptfs_rmdir
Linus Torvalds [Tue, 26 Apr 2011 02:00:55 +0000 (19:00 -0700)]
Merge branch 'for-torvalds' of git://git./linux/kernel/git/linusw/linux-stericsson
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
rtc: fix coh901331 startup crash
mach-ux500: fix i2c0 device setup regression
Eric Paris [Mon, 25 Apr 2011 20:26:29 +0000 (16:26 -0400)]
SELINUX: Make selinux cache VFS RCU walks safe
Now that the security modules can decide whether they support the
dcache RCU walk or not it's possible to make selinux a bit more
RCU friendly. The SELinux AVC and security server access decision
code is RCU safe. A specific piece of the LSM audit code may not
be RCU safe.
This patch makes the VFS RCU walk retry if it would hit the non RCU
safe chunk of code. It will normally just work under RCU. This is
done simply by passing the VFS RCU state as a flag down into the
avc_audit() code and returning ECHILD there if it would have an issue.
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Mon, 25 Apr 2011 18:01:36 +0000 (14:01 -0400)]
add hlist_bl_lock/unlock helpers
Now that the whole dcache_hash_bucket crap is gone, go all the way and
also remove the weird locking layering violations for locking the hash
buckets. Add hlist_bl_lock/unlock helpers to move the locking into the
list abstraction instead of requiring each caller to open code it.
After all allowing for the bit locks is the whole point of these helpers
over the plain hlist variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 26 Apr 2011 01:10:58 +0000 (18:10 -0700)]
bit_spinlock: don't play preemption games inside the busy loop
When we are waiting for the bit-lock to be released, and are looping
over the 'cpu_relax()' should not be doing anything else - otherwise we
miss the point of trying to do the whole 'cpu_relax()'.
Do the preemption enable/disable around the loop, rather than inside of
it.
Noticed when I was looking at the code generation for the dcache
__d_drop usage, and the code just looked very odd.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tyler Hicks [Fri, 22 Apr 2011 18:08:00 +0000 (13:08 -0500)]
eCryptfs: Flush dirty pages in setattr
After
57db4e8d73ef2b5e94a3f412108dff2576670a8a changed eCryptfs to
write-back caching, eCryptfs page writeback updates the lower inode
times due to the use of vfs_write() on the lower file.
To preserve inode metadata changes, such as 'cp -p' does with
utimensat(), we need to flush all dirty pages early in
ecryptfs_setattr() so that the user-updated lower inode metadata isn't
clobbered later in writeback.
https://bugzilla.kernel.org/show_bug.cgi?id=33372
Reported-by: Rocko <rockorequin@hotmail.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Tyler Hicks [Tue, 15 Mar 2011 19:54:00 +0000 (14:54 -0500)]
eCryptfs: Handle failed metadata read in lookup
When failing to read the lower file's crypto metadata during a lookup,
eCryptfs must continue on without throwing an error. For example, there
may be a plaintext file in the lower mount point that the user wants to
delete through the eCryptfs mount.
If an error is encountered while reading the metadata in lookup(), the
eCryptfs inode's size could be incorrect. We must be sure to reread the
plaintext inode size from the metadata when performing an open() or
setattr(). The metadata is already being read in those paths, so this
adds minimal performance overhead.
This patch introduces a flag which will track whether or not the
plaintext inode size has been read so that an incorrect i_size can be
fixed in the open() or setattr() paths.
https://bugs.launchpad.net/bugs/509180
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Tsutomu Itoh [Mon, 25 Apr 2011 23:43:53 +0000 (19:43 -0400)]
Btrfs: cleanup error handling in inode.c
The error processing of several places is changed like setting the
error number only at the error.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Mon, 25 Apr 2011 23:43:52 +0000 (19:43 -0400)]
Btrfs: put the right bio if we have an error
In btrfs_submit_direct_hook if the first btrfs_map_block fails we need to put
the orig_bio, not bio.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Mon, 25 Apr 2011 23:43:52 +0000 (19:43 -0400)]
Btrfs: free bitmaps properly when evicting the cache
If our space cache is wrong, we do the right thing and free up everything that
we loaded, however we don't reset the total_bitmaps counter or the thresholds or
anything. So in btrfs_remove_free_space_cache make sure to call free_bitmap()
if it's a bitmap, this will keep us from panicing when we check to make sure we
don't have too many bitmaps. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Li Zefan [Mon, 25 Apr 2011 23:43:52 +0000 (19:43 -0400)]
Btrfs: Free free_space item properly in btrfs_trim_block_group()
Since commit
dc89e9824464e91fa0b06267864ceabe3186fd8b, we've changed
to use a specific slab for alocation of free_space items.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
David Sterba [Mon, 25 Apr 2011 23:43:52 +0000 (19:43 -0400)]
btrfs: add missing spin_unlock to a rare exit path
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tsutomu Itoh [Mon, 25 Apr 2011 23:43:52 +0000 (19:43 -0400)]
Btrfs: check return value of kmalloc()
The check on the return value of kmalloc() is added to some places.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Itaru Kitayama [Mon, 25 Apr 2011 23:43:51 +0000 (19:43 -0400)]
btrfs: fix wrong allocating flag when reading page
the space cache use extent_readpages() to read free space information,
so we can not use GFP_KERNEL flag to allocate memory, or it may lead
to deadlock.
Signed-off-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tsutomu Itoh [Mon, 25 Apr 2011 23:43:51 +0000 (19:43 -0400)]
Btrfs: fix missing mutex_unlock in btrfs_del_dir_entries_in_log()
It is necessary to unlock mutex_lock before it return an error when
btrfs_alloc_path() fails.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tyler Hicks [Thu, 14 Apr 2011 20:35:11 +0000 (15:35 -0500)]
eCryptfs: Add reference counting to lower files
For any given lower inode, eCryptfs keeps only one lower file open and
multiplexes all eCryptfs file operations through that lower file. The
lower file was considered "persistent" and stayed open from the first
lookup through the lifetime of the inode.
This patch keeps the notion of a single, per-inode lower file, but adds
reference counting around the lower file so that it is closed when not
currently in use. If the reference count is at 0 when an operation (such
as open, create, etc.) needs to use the lower file, a new lower file is
opened. Since the file is no longer persistent, all references to the
term persistent file are changed to lower file.
Locking is added around the sections of code that opens the lower file
and assign the pointer in the inode info, as well as the code the fputs
the lower file when all eCryptfs users are done with it.
This patch is needed to fix issues, when mounted on top of the NFSv3
client, where the lower file is left silly renamed until the eCryptfs
inode is destroyed.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Tyler Hicks [Tue, 12 Apr 2011 16:23:09 +0000 (11:23 -0500)]
eCryptfs: dput dentries returned from dget_parent
Call dput on the dentries previously returned by dget_parent() in
ecryptfs_rename(). This is needed for supported eCryptfs mounts on top
of the NFSv3 client.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Tyler Hicks [Tue, 12 Apr 2011 16:21:36 +0000 (11:21 -0500)]
eCryptfs: Remove extra d_delete in ecryptfs_rmdir
vfs_rmdir() already calls d_delete() on the lower dentry. That was being
duplicated in ecryptfs_rmdir() and caused a NULL pointer dereference
when NFSv3 was the lower filesystem.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Linus Torvalds [Sun, 24 Apr 2011 15:51:15 +0000 (08:51 -0700)]
Merge branch 'dcache-cleanup'
* dcache-cleanup:
vfs: get rid of insane dentry hashing rules
Linus Torvalds [Sun, 24 Apr 2011 15:45:37 +0000 (08:45 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: ahci_start_engine compliant to AHCI spec
ata: pata_at91.c bugfix for initial_timing initialisation
ata: pata_at91.c bugfix for high master clock
ahci: AHCI-mode SATA patch for Intel Panther Point DeviceIDs
ata_piix: IDE-mode SATA patch for Intel Panther Point DeviceIDs
libata: Pioneer DVR-216D can't do SETXFER
ahci: don't enable port irq before handler is registered
libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65
libata: Kill unused ATA_DFLAG_{H|D}IPM flags
ahci: EM supported message type sysfs attribute
Linus Torvalds [Sun, 24 Apr 2011 15:42:15 +0000 (08:42 -0700)]
Merge branch 'for-linus' of git://git.infradead.org/ubifs-2.6
* 'for-linus' of git://git.infradead.org/ubifs-2.6:
UBIFS: fix master node recovery
UBIFS: fix false assertion warning in case of I/O failures
UBIFS: fix false space checking failure
Jian Peng [Sat, 23 Apr 2011 06:58:10 +0000 (23:58 -0700)]
libata: ahci_start_engine compliant to AHCI spec
At the end of section 10.1 of AHCI spec (rev 1.3), it states
Software shall not set PxCMD.ST to 1 until it is determined that
a functoinal device is present on the port as determined by
PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h
Even though most AHCI host controller works without this check,
specific controller will fail under this condition.
Signed-off-by: Jian Peng <jipeng2005@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Igor Plyatov [Mon, 28 Mar 2011 12:56:14 +0000 (16:56 +0400)]
ata: pata_at91.c bugfix for initial_timing initialisation
The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was
forgotten for "initial_timing" initialisation. This patch fixes such a problem.
Signed-off-by: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
projects / openwrt / staging / blogic.git / log