Ville Syrjälä [Thu, 21 Jun 2018 17:46:58 +0000 (20:46 +0300)]
drm/i915: Remove pointless if-else from sdvo code
The return value is a bool so we can just return the result of
the biwise AND. The compiler will take care of the rest.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621174658.18823-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Thu, 5 Jul 2018 15:47:56 +0000 (16:47 +0100)]
drm/i915/selftests: Fixup recursive MI_BB_START for gen3
There's no magic bit0 in MI_BB_START for gen3, it's the same dword length
parameter as elsewhere and needs to be zero.
v2: Same bug in both live_requests and live_hanghcheck.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107132
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705154756.5533-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Gustavo A. R. Silva [Thu, 28 Jun 2018 22:35:41 +0000 (17:35 -0500)]
drm/i915: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 141432
Addresses-Coverity-ID: 141433
Addresses-Coverity-ID: 141434
Addresses-Coverity-ID: 141435
Addresses-Coverity-ID: 141436
Addresses-Coverity-ID:
1357360
Addresses-Coverity-ID:
1357403
Addresses-Coverity-ID:
1357433
Addresses-Coverity-ID:
1392622
Addresses-Coverity-ID:
1415273
Addresses-Coverity-ID:
1435752
Addresses-Coverity-ID:
1441500
Addresses-Coverity-ID:
1454596
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628223541.GA17665@embeddedor.com
Madhav Chauhan [Thu, 5 Jul 2018 13:01:48 +0000 (18:31 +0530)]
drm/i915/icl: Define register for DSI PLL
This patch adds the new registers and corresponding bit definitions
which will be used for programming/enable DSI PLL.
v2: Review comments from Jani N
- Fix spaces while defining ICL_ESC_CLK_DIV_MASK
- Define shift and mask for bitfields.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530795727-28644-2-git-send-email-madhav.chauhan@intel.com
Chris Wilson [Thu, 5 Jul 2018 06:56:53 +0000 (07:56 +0100)]
drm/i915/selftests: Replace open-coded i915_address_space_init()
Use i915_address_space_init() rather than open-code it inside
mock_ppgtt() as we will forget to keep it in sync.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705065653.20449-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 5 Jul 2018 06:56:52 +0000 (07:56 +0100)]
drm/i915/selftests: Use full release for local ppgtt allocation
We can now use the full release mechanism (i915_ppgtt_put) for our local
ppgtt allocation in igt_ppgtt_alloc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705065653.20449-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 5 Jul 2018 06:56:51 +0000 (07:56 +0100)]
drm/i915: Remove defunct i915->vm_list
No longer used and can be removed. One less global that currently
demands struct_mutex protection.
References:
e9e7dc4144cd ("drm/i915/gtt: Make gen6 page directories evictable")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705065653.20449-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 4 Jul 2018 18:55:18 +0000 (19:55 +0100)]
drm/i915/gtt: Pull global wc page stash under its own locking
Currently, the wc-stash used for providing flushed WC pages ready for
constructing the page directories is assumed to be protected by the
struct_mutex. However, we want to remove this global lock and so must
install a replacement global lock for accessing the global wc-stash (the
per-vm stash continues to be guarded by the vm).
We need to push ahead on this patch due to an oversight in hastily
removing the struct_mutex guard around the igt_ppgtt_alloc selftest. No
matter, it will prove very useful (i.e. will be required) in the near
future.
v2: Restore the onstack stash so that we can drop the vm->mutex in
future across the allocation.
v3: Restore the lost pagevec_init of the onstack allocation, and repaint
function names.
v4: Reorder init so that we don't try and use i915_address_space before
it is ininitialised.
Fixes: 1f6f00238abf ("drm/i915/selftests: Drop struct_mutex around lowlevel pggtt allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704185518.4193-1-chris@chris-wilson.co.uk
Ville Syrjälä [Mon, 11 Jun 2018 20:02:58 +0000 (23:02 +0300)]
drm/i915: Unmask and enable master error interrupt on gen2/3
For whatever reason we only unmask and enable the master error
interrut on gen4. With the EIR handling fixed let's do that
on gen2/3 as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611200258.27121-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 11 Jun 2018 20:02:57 +0000 (23:02 +0300)]
drm/i915: Fix pre-ILK error interrupt ack
Adjust the EIR clearing to cope with the edge triggered IIR
on i965/g4x. To guarantee an edge in the ISR master error bit
we temporarily mask everything in EMR. As some of the EIR bits
can't even be directly cleared we also borrow a trick from
i915_clear_error_registers() and permanently mask any bit that
remains high. No real thought given to how we might unmask them
again once the cause for the error has been clered. I suppose
on pre-g4x GPU reset will reinitialize EMR from scratch.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611200258.27121-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Thu, 14 Jun 2018 17:56:25 +0000 (20:56 +0300)]
drm/i915: Fix hotplug irq ack on i965/g4x
Just like with PIPESTAT, the edge triggered IIR on i965/g4x
also causes problems for hotplug interrupts. To make sure
we don't get the IIR port interrupt bit stuck low with the
ISR bit high we must force an edge in ISR. Unfortunately
we can't borrow the PIPESTAT trick and toggle the enable
bits in PORT_HOTPLUG_EN as that act itself generates hotplug
interrupts. Instead we just have to loop until we've cleared
PORT_HOTPLUG_STAT, or we just give up and WARN.
v2: Don't frob with PORT_HOTPLUG_EN
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Chris Wilson [Tue, 3 Jul 2018 13:53:31 +0000 (14:53 +0100)]
drm/i915/selftests: Drop struct_mutex around lowlevel pggtt allocation
For a ppgtt that we are constructing, there is no struct_mutex
dependence so skip it. In the process, also ping the scheduler
frequently to try and avoid the NMI watchdog.
v2: gen6 requires struct_mutex to clean up (currently)
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=107094
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703135331.12265-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 3 Jul 2018 10:18:29 +0000 (11:18 +0100)]
drm/i915/selftests: Release the struct_mutex to free the objects
live_gtt is a very slow test to run, simply because it tries to allocate
and use as much as the 48b address space as possibly can and in the
process will try to own all of the system memory. This leads to resource
exhaustion and CPU starvation; the latter impacts us when the NMI
watchdog declares a task hung due to a mutex contention with ourselves.
This we can prevent by releasing the struct_mutex and forcing our
i915/rcu workers to run, and in particular flushing the freed object
worker that is the cause for concern.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107094
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703101829.7360-1-chris@chris-wilson.co.uk
Tarun Vyas [Wed, 27 Jun 2018 20:02:50 +0000 (13:02 -0700)]
drm/i915: Wait for PSR exit before checking for vblank evasion
The PIPEDSL freezes on PSR entry and if PSR hasn't fully exited, then
the pipe_update_start call schedules itself out to check back later.
On ChromeOS-4.4 kernel, which is fairly up-to-date w.r.t drm/i915 but
lags w.r.t core kernel code, hot plugging an external display triggers
tons of "potential atomic update errors" in the dmesg, on *pipe A*. A
closer analysis reveals that we try to read the scanline 3 times and
eventually timeout, b/c PSR hasn't exited fully leading to a PIPEDSL
stuck @ 1599. This issue is not seen on upstream kernels, b/c for *some*
reason we loop inside intel_pipe_update start for ~2+ msec which in this
case is more than enough to exit PSR fully, hence an *unstuck* PIPEDSL
counter, hence no error. On the other hand, the ChromeOS kernel spends
~1.1 msec looping inside intel_pipe_update_start and hence errors out
b/c the source is still in PSR.
Regardless, we should wait for PSR exit (if PSR is disabled, we incur
a ~1-2 usec penalty) before reading the PIPEDSL, b/c if we haven't
fully exited PSR, then checking for vblank evasion isn't actually
applicable.
v4: Comment explaining psr_wait after enabling VBL interrupts (DK)
v5: CAN_PSR() to handle platforms that don't support PSR.
v6: Handle local_irq_disable on early return (Chris)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627200250.1515-2-tarun.vyas@intel.com
Tarun Vyas [Wed, 27 Jun 2018 20:02:49 +0000 (13:02 -0700)]
drm/i915/psr: Lockless version of psr_wait_for_idle
This is a lockless version of the exisiting psr_wait_for_idle().
We want to wait for PSR to idle out inside intel_pipe_update_start.
At the time of a pipe update, we should never race with any psr
enable or disable code, which is a part of crtc enable/disable.
The follow up patch will use this lockless wait inside pipe_update_
start to wait for PSR to idle out before checking for vblank evasion.
We need to keep the wait in pipe_update_start to as less as it can be.
So,we can live and flourish w/o taking any psr locks at all.
Even if psr is never enabled, psr2_enabled will be false and this
function will wait for PSR1 to idle out, which should just return
immediately, so a very short (~1-2 usec) wait for cases where PSR
is disabled.
v2: Add comment to explain the 25msec timeout (DK)
v3: Rename psr_wait_for_idle to __psr_wait_for_idle_locked to avoid
naming conflicts and propagate err (if any) to the caller (Chris)
v5: Form a series with the next patch
v7: Better explain the need for lockless wait and increase the max
timeout to handle refresh rates < 60 Hz (Daniel Vetter)
v8: Rebase
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627200250.1515-1-tarun.vyas@intel.com
Dhinakaran Pandiyan [Thu, 28 Jun 2018 06:18:54 +0000 (23:18 -0700)]
drm/i915: Remove unnecessary check for unsupported modifiers for NV12
There is already a check to allow only RGB8888 formats with CCS
modifiers.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628061854.6430-1-dhinakaran.pandiyan@intel.com
Vathsala Nagaraju [Wed, 27 Jun 2018 08:08:30 +0000 (13:38 +0530)]
drm/i915/psr: Add psr1 live status
Prints live state of psr1.Extending the existing
PSR2 live state function to cover psr1.
Tested on KBL with psr2 and psr1 panel.
v2: rebase
v3: DK
Rename psr2_live_status to psr_source_status.
v4: DK
Move EDP_PSR_STATUS_STATE_SHIFT below EDP_PSR_STATUS_STATE_MASK.
Pass seq to psr_source_status, handle source status prints in
psr_source_status.
v5: Fixed CI warning messages
v6:
Remove extra space in the title before the colon.(DK)
Rebase. (Jani)
v7: Use tabs for indenting the values.(Jani)
v8: Addressed dk's review comments.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530086910-15914-1-git-send-email-vathsala.nagaraju@intel.com
Chris Wilson [Sat, 30 Jun 2018 09:05:09 +0000 (10:05 +0100)]
drm/i915: Try GGTT mmapping whole object as partial
If the whole object is already pinned by HW for use as scanout, we will
fail to move it to the mappable region and so must resort to using a
partial VMA covering the whole object.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104513
Fixes: aa136d9d72c2 ("drm/i915: Convert partial ggtt vma to full ggtt if it spans the entire object")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180630090509.469-1-chris@chris-wilson.co.uk
Jani Nikula [Fri, 29 Jun 2018 10:20:39 +0000 (13:20 +0300)]
drm/i915: abstract and document register picking macros
Try to describe what the pick variants do, and which to prefer. No
functional changes.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629102039.2435-1-jani.nikula@intel.com
Michal Wajdeczko [Mon, 18 Jun 2018 11:18:20 +0000 (11:18 +0000)]
drm/i915/guc: Print CTL params passed to Guc
While debugging we may want to examine params passed to GuC.
v2: drop #ifdef DEBUG_GUC - Michal
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618111821.47088-1-michal.wajdeczko@intel.com
Chris Wilson [Fri, 29 Jun 2018 13:37:17 +0000 (14:37 +0100)]
drm/i915/selftests: Attach the fence to the object when making busy
make_obj_busy() makes a dummy busy object, but didn't attach the fence
to the reservation object, so it would not have registered as busy. For
completeness, attach the dummy request as the exclusive fence and mark
the object as written (in i915_vma_move_to_active)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629133717.11761-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 29 Jun 2018 13:37:16 +0000 (14:37 +0100)]
drm/i915/selftests: Mark up write into scratch vma
We correctly attach the exclusive fetch for the scratch object when
emitting a request that writes into it, but for completeness we should
also declared the write to i915_vma_move_to_active()
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629133717.11761-1-chris@chris-wilson.co.uk
Maarten Lankhorst [Mon, 25 Jun 2018 16:37:58 +0000 (18:37 +0200)]
drm/i915: Remove delayed FBC activation.
The only time we should start FBC is when we have waited a vblank
after the atomic update. We've already forced a vblank wait by doing
wait_for_flip_done before intel_post_plane_update(), so we don't need
to wait a second time before enabling.
Removing the worker simplifies the code and removes possible race
conditions, like happening in 103167.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103167
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625163758.10871-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Maarten Lankhorst [Mon, 25 Jun 2018 16:37:57 +0000 (18:37 +0200)]
drm/i915: Block enabling FBC until flips have been completed
There is a small race window in which FBC can be enabled after
pre_plane_update is called, but before the page flip has been
queued or completed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103167
Link: https://patchwork.freedesktop.org/patch/msgid/20180625163758.10871-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Chris Wilson [Thu, 28 Jun 2018 20:12:11 +0000 (21:12 +0100)]
drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)
Back in commit
27af5eea54d1 ("drm/i915: Move execlists irq handler to a
bottom half"), we came to the conclusion that running our CSB processing
and ELSP submission from inside the irq handler was a bad idea. A really
bad idea as we could impose nearly 1s latency on other users of the
system, on average! Deferring our work to a tasklet allowed us to do the
processing with irqs enabled, reducing the impact to an average of about
50us.
We have since eradicated the use of forcewaked mmio from inside the CSB
processing and ELSP submission, bringing the impact down to around 5us
(on Kabylake); an order of magnitude better than our measurements 2
years ago on Broadwell and only about 2x worse on average than the
gem_syslatency on an unladen system.
In this iteration of the tasklet-vs-direct submission debate, we seek a
compromise where by we submit new requests immediately to the HW but
defer processing the CS interrupt onto a tasklet. We gain the advantage
of low-latency and ksoftirqd avoidance when waking up the HW, while
avoiding the system-wide starvation of our CS irq-storms.
Comparing the impact on the maximum latency observed (that is the time
stolen from an RT process) over a 120s interval, repeated several times
(using gem_syslatency, similar to RT's cyclictest) while the system is
fully laden with i915 nops, we see that direct submission an actually
improve the worse case.
Maximum latency in microseconds of a third party RT thread
(gem_syslatency -t 120 -f 2)
x Always using tasklets (a couple of >1000us outliers removed)
+ Only using tasklets from CS irq, direct submission of requests
+------------------------------------------------------------------------+
| + |
| + |
| + |
| + + |
| + + + |
| + + + + x x x |
| +++ + + + x x x x x x |
| +++ + ++ + + *x x x x x x |
| +++ + ++ + * *x x * x x x |
| + +++ + ++ * * +*xxx * x x xx |
| * +++ + ++++* *x+**xx+ * x x xxxx x |
| **x++++*++**+*x*x****x+ * +x xx xxxx x x |
|x* ******+***************++*+***xxxxxx* xx*x xxx + x+|
| |__________MA___________| |
| |______M__A________| |
+------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 118 91 186 124 125.28814 16.279137
+ 120 92 187 109 112.00833 13.458617
Difference at 95.0% confidence
-13.2798 +/- 3.79219
-10.5994% +/- 3.02677%
(Student's t, pooled s = 14.9237)
However the mean latency is adversely affected:
Mean latency in microseconds of a third party RT thread
(gem_syslatency -t 120 -f 1)
x Always using tasklets
+ Only using tasklets from CS irq, direct submission of requests
+------------------------------------------------------------------------+
| xxxxxx + ++ |
| xxxxxx + ++ |
| xxxxxx + +++ ++ |
| xxxxxxx +++++ ++ |
| xxxxxxx +++++ ++ |
| xxxxxxx +++++ +++ |
| xxxxxxx + ++++++++++ |
| xxxxxxxx ++ ++++++++++ |
| xxxxxxxx ++ ++++++++++ |
| xxxxxxxxxx +++++++++++++++ |
| xxxxxxxxxxx x +++++++++++++++ |
|x xxxxxxxxxxxxx x + + ++++++++++++++++++ +|
| |__A__| |
| |____A___| |
+------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 120 3.506 3.727 3.631 3.
6321417 0.
02773109
+ 120 3.834 4.149 4.039 4.
0375167 0.
041221676
Difference at 95.0% confidence
0.405375 +/- 0.
00888913
11.1608% +/- 0.244735%
(Student's t, pooled s = 0.03513)
However, since the mean latency corresponds to the amount of irqsoff
processing we have to do for a CS interrupt, we only need to speed that
up to benefit not just system latency but our own throughput.
v2: Remember to defer submissions when under reset.
v4: Only use direct submission for new requests
v5: Be aware that with mixing direct tasklet evaluation and deferred
tasklets, we may end up idling before running the deferred tasklet.
v6: Remove the redudant likely() from tasklet_is_enabled(), restrict the
annotation to reset_in_progress().
v7: Take the full timeline.lock when enabling perf_pmu stats as the
tasklet is no longer a valid guard. A consequence is that the stats are
now only valid for engines also using the timeline.lock to process
state.
Testcase: igt/gem_exec_latency/*rthog*
References:
27af5eea54d1 ("drm/i915: Move execlists irq handler to a bottom half")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-9-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:10 +0000 (21:12 +0100)]
drm/i915/execlists: Trust the CSB
Now that we use the CSB stored in the CPU friendly HWSP, we do not need
to track interrupts for when the mmio CSB registers are valid and can
just check where we read up to last from the cached HWSP. This means we
can forgo the atomic bit tracking from interrupt, and in the next patch
it means we can check the CSB at any time.
v2: Change the splitting inside reset_prepare, we only want to lose
testing the interrupt in this patch, the next patch requires the change
in locking
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-8-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:09 +0000 (21:12 +0100)]
drm/i915/execlists: Stop storing the CSB read pointer in the mmio register
As we now never read back our current head position from the CSB
pointers register, and the HW itself doesn't use it to prevent
overwriting unread CSB entries, we do not need to keep updating the
register. As it turns out this register is not listed as being shadowed,
and so requires forcewake -- but we haven't been taking forcewake around
it so the writes has probably been regularly dropped. Fortuitously, we
only read the value after a reset where it did not matter, and zero was
the right answer (well, close enough).
Mika pointed out that this was how we used to do it (accidentally!)
before he fixed it in commit
cc53699b25b5 ("drm/i915: Use masked write
for Context Status Buffer Pointer").
References:
cc53699b25b5 ("drm/i915: Use masked write for Context Status Buffer Pointer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-7-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:08 +0000 (21:12 +0100)]
drm/i915/execlists: Reset CSB write pointer after reset
On HW reset, the HW clears the write pointer (to 0). But since it also
writes its first CSB entry to slot 0, we need to reset the write pointer
back to the element before (so the first entry we read is 0).
This is required for the next patch, where we trust the CSB completely!
v2: Use _MASKED_FIELD
v3: Store the reset value, so that we differentiate between mmio/hwsp
transparently and without pretense.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-6-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:07 +0000 (21:12 +0100)]
drm/i915/execlists: Unify CSB access pointers
Following the removal of the last workarounds, the only CSB mmio access
is for the old vGPU interface. The mmio registers presented by vGPU do
not require forcewake and can be treated as ordinary volatile memory,
i.e. they behave just like the HWSP access just at a different location.
We can reduce the CSB access to a set of read/write/buffer pointers and
treat the various paths identically and not worry about forcewake.
(Forcewake is nightmare for worstcase latency, and we want to process
this all with irqsoff -- no latency allowed!)
v2: Comments, comments, comments. Well, 2 bonus comments.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-5-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:06 +0000 (21:12 +0100)]
drm/i915/execlists: Process one CSB update at a time
In the next patch, we will process the CSB events directly from the
submission path, rather than only after a CS interrupt. Hence, we will
no longer have the need for a loop until the has-interrupt bit is clear,
and in the meantime can remove that small optimisation.
v2: Tvrtko pointed out it was safer to unconditionally kick the tasklet
after each irq, when assuming that the tasklet is called for each irq.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-4-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:05 +0000 (21:12 +0100)]
drm/i915/execlists: Pull CSB reset under the timeline.lock
In the following patch, we will process the CSB events under the
timeline.lock and not serialised by the tasklet. This also means that we
will need to protect access to common variables such as
execlists->csb_head with the timeline.lock during reset.
v2: Move sync_irq to avoid deadlocks between taking timeline.lock from
our interrupt handler.
v3: Kill off the synchronize_hardirq as it raises more questions than
answered; now we use the timeline.lock entirely for CSB serialisation
between the irq and elsewhere, we don't need to be so heavy handed with
flushing
v4: Treat request cancellation (wedging after failed reset) similarly
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:04 +0000 (21:12 +0100)]
drm/i915/execlists: Pull submit after dequeue under timeline lock
In the next patch, we will begin processing the CSB from inside the
submission path (underneath an irqsoff section, and even from inside
interrupt handlers). This means that updating the execlists->port[] will
no longer be serialised by the tasklet but needs to be locked by the
engine->timeline.lock instead. Pull dequeue and submit under the same
lock for protection. (An alternate future plan is to keep the in/out
arrays separate for concurrent processing and reduced lock coverage.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 20:12:03 +0000 (21:12 +0100)]
drm/i915: Drop posting reads to flush master interrupts
We do not need to do a posting read of our uncached mmio write to
re-enable the master interrupt lines after handling an interrupt, so
don't. This saves us a slow UC read before we can process the interrupt,
most noticeable in execlists where any stalls imposes extra latency on
GPU command execution.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-1-chris@chris-wilson.co.uk
Michal Wajdeczko [Thu, 28 Jun 2018 14:15:21 +0000 (14:15 +0000)]
drm/i915/uc: Fetch GuC/HuC firmwares from guc/huc specific init
We're fetching GuC/HuC firmwares directly from uc level during
init_early stage but this breaks guc/huc struct isolation and
also strict SW-only initialization rule for init_early. Move fw
fetching to init phase and do it separately per guc/huc struct.
v2: don't forget to move wopcm_init - Michele
v3: fetch in init_misc phase - Michal
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628141522.62788-2-michal.wajdeczko@intel.com
Michal Wajdeczko [Thu, 28 Jun 2018 14:15:20 +0000 (14:15 +0000)]
drm/i915/guc: Use intel_guc_init_misc to hide GuC internals
We will add more init steps to misc phase and there is no need
to expose them separately for use in uc_init_misc function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628141522.62788-1-michal.wajdeczko@intel.com
Chris Wilson [Wed, 27 Jun 2018 20:13:04 +0000 (21:13 +0100)]
drm/i915: Only signal from interrupt when requested
Avoid calling dma_fence_signal() from inside the interrupt if we haven't
enabled signaling on the request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-4-chris@chris-wilson.co.uk
Chris Wilson [Wed, 27 Jun 2018 20:13:03 +0000 (21:13 +0100)]
drm/i915: Move the irq_counter inside the spinlock
Rather than have multiple locked instructions inside the notify_ring()
irq handler, move them inside the spinlock and reduce their intrinsic
locking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-3-chris@chris-wilson.co.uk
Chris Wilson [Wed, 27 Jun 2018 20:13:02 +0000 (21:13 +0100)]
drm/i915: Only trigger missed-seqno checking next to boundary
If we have more interrupts pending (because we know there are more
breadcrumb signals before the completion), then we do not need to
trigger an irq_seqno_barrier or even wakeup the task on this interrupt
as there will be another. To allow some margin of error (we are trying
to work around incoherent seqno after all), we wakeup the breadcrumb
before the target as well as on the target.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 27 Jun 2018 20:13:01 +0000 (21:13 +0100)]
drm/i915: Reduce spinlock hold time during notify_ring() interrupt
By taking advantage of the RCU protection of the task struct, we can find
the appropriate signaler under the spinlock and then release the spinlock
before waking the task and signaling the fence.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 28 Jun 2018 13:22:06 +0000 (14:22 +0100)]
drm/i915: Show vma allocator stack when in doubt
At the moment, gem_exec_gttfill fails with a sporadic EBUSY due to us
wanting to unbind a pinned batch. Let's dump who first bound that vma to
see if that helps us identify who still unexpectedly has it pinned.
v2: We cannot allocate inside the printer (as it may be on an fs-reclaim
path), so hope for the best and build the string on the stack
v3: stack depth of 16 routinely overflows a 512 character string, limit
it to 12 to avoid unsightly truncation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628132206.8329-1-chris@chris-wilson.co.uk
Thomas Zimmermann [Mon, 18 Jun 2018 11:01:54 +0000 (13:01 +0200)]
drm/i915: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-6-tdz@users.sourceforge.net
Thomas Zimmermann [Mon, 18 Jun 2018 11:01:53 +0000 (13:01 +0200)]
drm/i915: Replace drm_gem_object_unreference_unlocked with put function
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-5-tdz@users.sourceforge.net
Thomas Zimmermann [Mon, 18 Jun 2018 11:01:52 +0000 (13:01 +0200)]
drm/i915: Replace __drm_gem_object_unreference with __drm_gem_object_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-4-tdz@users.sourceforge.net
Thomas Zimmermann [Mon, 18 Jun 2018 11:01:51 +0000 (13:01 +0200)]
drm/i915: Replace drm_gem_object_{un/reference} with {put,get} functions
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-3-tdz@users.sourceforge.net
Thomas Zimmermann [Mon, 18 Jun 2018 11:01:50 +0000 (13:01 +0200)]
drm/i915: Replace drm_connector_{un/reference} with put,get functions
This patch unifies the naming of DRM functions for reference counting
of struct drm_connector. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-2-tdz@users.sourceforge.net
Anusha Srivatsa [Tue, 26 Jun 2018 20:52:23 +0000 (13:52 -0700)]
drm/i915/icp: Add Interrupt Support
This patch addresses Interrupts from south display engine (SDE).
ICP has two registers - SHOTPLUG_CTL_DDI and SHOTPLUG_CTL_TC.
Introduce these registers and their intended values.
Introduce icp_irq_handler().
The icp_irq_postinstall() takes care of
enabling all PCH interrupt sources, to unmask
them as needed with SDEIMR, as is done
done by ibx_irq_pre_postinstall() for earlier platforms.
We do not need to explicitly call the ibx_irq_pre_postinstall().
Also, while changing these,
s/CPT/PPT/CPT-CNP comment.
v2:
- remove redundant register defines.(Lucas)
- Change register names to be more consistent with
previous platforms (Lucas)
v3:
-Reorder bit defines to a more appropriate location.
Change the comments. Confirm in the commit message that
icp_irq_postinstall() need not go to
ibx_irq_pre_postinstall() and ibx_irq_postinstall()
as in earlier platforms. (Paulo)
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
[Paulo: coding style bikesheds and rebases].
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530046343-30649-1-git-send-email-anusha.srivatsa@intel.com
Chris Wilson [Wed, 27 Jun 2018 11:53:34 +0000 (12:53 +0100)]
drm/i915: Wait for engines to idle before retiring
In the next^W forthcoming patch, we will start to defer retiring the
request from the engine list if it is still active on the submission
backend. To preserve the semantics that after wait-for-idle completes
the system is idle and fully retired, we need to therefore wait for the
backends to idle before calling i915_retire_requests().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627115334.16282-1-chris@chris-wilson.co.uk
Imre Deak [Tue, 26 Jun 2018 14:22:32 +0000 (17:22 +0300)]
drm/i915/icl: Add power well support
Add the definition for ICL power wells and their mapping to power
domains. On ICL there are 3 power well control registers, we'll select
the correct one based on higher bits of the power well ID. The offset
for the control and status flags within this register is based on the
lower bits of the ID as on older platforms.
As the DC state programming is also the same as on old platforms we can
reuse the corresponding helpers. For this we mark here the DC-off power
well as shared among multiple platforms.
Other than the above the delta between old platforms and ICL:
- Pipe C has its own power well, so we can save some additional power in the
pipe A+B and (non-eDP) pipe A configurations.
- Power wells for port E/F DDI/AUX IO and Thunderbolt 1-4 AUX IO
v2:
- Rebase on drm-tip after prep patch for this was merged there as
requested by Paulo.
- Actually add the new AUX and DDI power well control regs (Rakshmi)
v3:
- Fix power well register names in code comments
- Add TBT AUX->power well 3 dependency
v4:
- Rebase
v5:
- Detach AUX power wells from the INIT power domain. These power wells
can only be enabled in a TC/TBT connected state and otherwise not
needed during driver initialization.
v6:
- Use _MMIO_PORT(...) instead _MMIO(_PICK(...)) (Paulo)
Fix checkpatch warnings.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rakshmi Bhatia <rakshmi.bhatia@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com> (v1)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626142232.22361-1-imre.deak@intel.com
José Roberto de Souza [Tue, 26 Jun 2018 20:16:44 +0000 (13:16 -0700)]
drm/i915/psr: Enable CRC check in the static frame on the sink side
Sink can be configured to calculate the CRC over the static frame and
compare with the CRC calculated and transmited in the VSC SDP by
source, if there is a mismatch sink will do a short pulse in HPD
and set DP_PSR_LINK_CRC_ERROR in DP_PSR_ERROR_STATUS.
Spec: 7723
v6:
andling DP_PSR_LINK_CRC_ERROR here and remove "bdw+" from commit
message
v4:
patch moved to after 'drm/i915/psr: Avoid PSR exit max time timeout'
to avoid touch in 2 patches EDP_PSR_DEBUG.
v3:
disabling PSR instead of exiting on error
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-5-jose.souza@intel.com
José Roberto de Souza [Tue, 26 Jun 2018 20:16:43 +0000 (13:16 -0700)]
drm/i915/psr: Avoid PSR exit max time timeout
Specification requires that max time should be masked from bdw and
forward but it can be also safely enabled to hsw.
This will make PSR exits more deterministic and only when really
needed. If this was used to fix a issue in some panel than can
only self-refresh for a few seconds, that panel will interrupt
and assert one of the PSR errors handled in:
'drm/i915/psr: Handle PSR RFB storage error' and
'drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink'
Spec: 21664
v4:
patch moved to before 'drm/i915/psr/bdw+: Enable CRC check in the
static frame on the sink side' to avoid touch in 2 patches
EDP_PSR_DEBUG.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-4-jose.souza@intel.com
José Roberto de Souza [Tue, 26 Jun 2018 20:16:42 +0000 (13:16 -0700)]
drm/i915/psr: Handle PSR errors
Sink will interrupt source when it have any PSR error.
DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR is a PSR2 but already
handling it here.
The only missing error to be handled is DP_PSR_LINK_CRC_ERROR that
will be taken in care in a futher patch.
v6:
not handling DP_PSR_LINK_CRC_ERROR here
v5:
handling all PSR errors here, so the commit message and
comment have changed
v3:
disabling PSR instead of exiting on error
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-3-jose.souza@intel.com
José Roberto de Souza [Tue, 26 Jun 2018 20:16:41 +0000 (13:16 -0700)]
drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink
eDP spec states that sink device will do a short pulse in HPD
line when there is a PSR/PSR2 error that needs to be handled by
source, this is handling the first and most simples error:
DP_PSR_SINK_INTERNAL_ERROR.
Here taking the safest approach and disabling PSR(at least until
the next modeset), to avoid multiple rendering issues due to
bad pannels.
v5:
added lockdep_assert in psr_disable and renamed psr_disable()
to intel_psr_disable_locked()
v4:
Using CAN_PSR instead of HAS_PSR in intel_psr_short_pulse
v3:
disabling PSR instead of exiting on error
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-2-jose.souza@intel.com
José Roberto de Souza [Tue, 26 Jun 2018 20:16:40 +0000 (13:16 -0700)]
drm/i915/psr: Remove intel_crtc_state parameter from disable_source()
It was only used in VLV/CHV so after the removal of the PSR support
for those platforms it is not necessary any more.
v7: Rebased
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-1-jose.souza@intel.com
Dhinakaran Pandiyan [Tue, 26 Jun 2018 09:05:22 +0000 (02:05 -0700)]
drm/i915/psr: Warn for erroneous enabling of both PSR1 and PSR2.
Depending whether PSR1 or PSR2 was configured, we print a warning if the
corresponding control mmio indicated PSR was erroneously enabled. As
Chris pointed out, it makes more sense to check for both the mmio's
since we expect neither PSR1 nor PSR2 to be enabled when psr_activate() is
called.
v2: Read PSR2 control register only on supported platforms (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626090522.17682-1-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Mon, 25 Jun 2018 05:47:40 +0000 (22:47 -0700)]
drm/i915/psr: Fix race in intel_psr_work()
Commit
5422b37c907e ("drm/i915/psr: Kill delays when activating psr
back.") switched from delayed work to the plain variant and while doing so
removed the check for work_busy() before scheduling a PSR activation.
This appears to cause consecutive executions of psr_activate() in this
scenario - after a worker picks up the PSR work item for execution and
before the work function can acquire the PSR mutex, a psr_flush() can
get hold of the mutex and schedule another PSR work. Without a psr_exit()
between the two psr_activate() calls, warning messages get printed.
Further, since we drop the mutex in the midst of psr_work() to wait for
PSR to idle, another work item can also get scheduled. Fix this by
returning if PSR was already active.
Fixes: 5422b37c907e ("drm/i915/psr: Kill delays when activating psr back.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106948
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625054741.3919-1-dhinakaran.pandiyan@intel.com
Rodrigo Vivi [Tue, 26 Jun 2018 05:25:36 +0000 (22:25 -0700)]
drm/i915/psr: Kill useless function pointers.
At some point we introduced the function pointers
on PSR code to help with VLV/CHV separation logic
because it had a different HW implementation from PSR.
Since all converged to HSW PSR and we dropped the
VLV/CHV support, let's also kill the useless function
pointers and leave the code cleaner.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626052536.15137-1-rodrigo.vivi@intel.com
Imre Deak [Thu, 21 Jun 2018 18:44:49 +0000 (21:44 +0300)]
drm/i915/ddi: Get AUX power domain for DP main link too
So far we got an AUX power domain reference only for the duration of DP
AUX transfers. However, the following suggests that we also need these
for main link functionality:
- The specification doesn't state whether it's needed or not for main
link functionality, but suggests that these power wells need to be
enabled already during display core initialization (Sequences to
Initialize Display).
- For PSR we need to keep the AUX power well enabled.
- On ICL combo PHY ports (non-TC) the AUX power well is needed for
link training too: while the port is enabled with a DP link training
test pattern trying to toggle the AUX power well will time out.
- On ICL MG PHY ports (TC) the AUX power well is needed also for main
link functionality (both in DP and HDMI modes).
- Windows enables these power wells both for main and AUX lane
functionality.
Based on the above take an AUX power reference for main link
functionality too. This makes a difference only on GEN10+ (GLK+)
platforms, where we have separate port specific AUX power wells.
For PSR we still need to distinguish between port A and the other
ports, since on port A DC states must stay enabled for main link
functionality, but DC states must be disabled for driver initiated
AUX transfers. So re-use the corresponding helper from intel_psr.c.
Since we take now a reference for main link functionality on all DP
ports we can forgo taking the separate power ref for PSR functionality.
v2:
- Make sure DC states stay enabled when taking the ref on port A.
(Ville)
v3: (Ville)
- Fix comment about logic for encoders without a crtc state and
add FIXME note for a simplification to avoid calling get_power_domains
in such cases.
- Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
[Clarified code comments in intel_ddi_main_link_aux_domain() and
intel_ddi_get_power_domains() (Imre)]
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com
Chris Wilson [Mon, 25 Jun 2018 10:06:04 +0000 (11:06 +0100)]
drm/i915: Context objects can never be active when freed
Due to how we only release the pining on the context state on
retirement and never track activity on the context vma itself, the
object can never be active at the point of release. Replace the
conditional transfer of ownership onto an active-reference with an
assert that the object is idle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625100604.22598-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 25 Jun 2018 10:06:03 +0000 (11:06 +0100)]
drm/i915/execlists: Check for ce->state before destroy
As we may cancel the ce->state allocation during context pinning (but
crucially after we mark ce as operational), that means we may be asked
to destroy a nonexistent ce->state. Given the choice in handing a
complex error path on pinning, and just ignoring the lack of state in
destroy, choice the latter for simplicity.
Reported-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625100604.22598-1-chris@chris-wilson.co.uk
Chris Wilson [Sat, 23 Jun 2018 10:39:51 +0000 (11:39 +0100)]
drm/i915: Defer modeset cleanup to a secondary task
If we avoid cleaning up the old state immediately in
intel_atomic_commit_tail() and defer it to a second task, we can avoid
taking heavily contended locks when the caller is ready to procede.
Subsequent modesets will wait for the cleanup operation (either directly
via the ordered modeset wq or indirectly through the atomic helperr)
which keeps the number of inflight cleanup tasks in check.
As an example, during reset an immediate modeset is performed to disable
the displays before the HW is reset, which must avoid struct_mutex to
avoid recursion. Moving the cleanup to a separate task, defers acquiring
the struct_mutex to after the GPU is running again, allowing it to
complete. Even in a few patches time (optimist!) when we no longer
require struct_mutex to unpin the framebuffers, it will still be good
practice to minimise the number of contention points along reset. The
mutex dependency still exists (as one modeset flushes the other), but in
the short term it resolves the deadlock for simple reset cases.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101600
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180623103951.23889-1-chris@chris-wilson.co.uk
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Anusha Srivatsa [Fri, 22 Jun 2018 18:19:03 +0000 (11:19 -0700)]
drm/i915/guc: Remove USES_GUC_SUBMISSION for ads programming
In the guc_ctl_debug_flags, the ads struct is programmed only
when USES_GUC_SUBMISSION is satisfied. But, this has to be
programmed for all suspend/resume cases.
Remove the condition and program the ads struct for
both huc loading and guc submission.
This issue was noticed when CI threw errors for enable_guc=2
(load huc; disable submission)
v2:
- Change commit title.
- Correct the shifts. (Daniele)
Credits to: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Spotswood <john.a.spotswood@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1529691543-28606-1-git-send-email-anusha.srivatsa@intel.com
Vandita Kulkarni [Thu, 21 Jun 2018 15:13:56 +0000 (20:43 +0530)]
drm/i915: Enable hw workaround to bypass alpha
Alpha blending with alpha 0 and 0xff passes through
alpha math and rounding logic causing differences
compared to fully transparent or opaque plane,resulting
in CRC mismatch.
This WA on icl and above enables hardware to bypass alpha
math and rounding for per pixel alpha values of 00 and 0xff
v2: Fix patchwork checkpatch warnings.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1529594036-25036-1-git-send-email-vandita.kulkarni@intel.com
Imre Deak [Tue, 19 Jun 2018 16:41:15 +0000 (19:41 +0300)]
drm/i915/icl: Do read-modify-write as needed during MG PLL programming
Some MG PLL registers have fields that need to be preserved at their HW
default or BIOS programmed values. So make sure we preserve them.
v2:
- Add comment to icl_mg_pll_write() explaining the need for register
masks. (Vandita)
- Fix patchwork checkpatch warning.
v3:
- Rebase on drm-tip.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v1)
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619164115.7835-1-imre.deak@intel.com
Imre Deak [Fri, 15 Jun 2018 14:39:10 +0000 (17:39 +0300)]
drm/i915/icl: Fix MG PLL setup when refclk is 38.4MHz
Atm we're zeroing out fields in MG_PLL_BIAS and MG_PLL_TDC_COLDST_BIAS
if refclk is 38.4MHz, whereas the spec tells us to preserve them.
Although the calculated values mostly match the register defaults even
for the 38.4MHz case, there are some differences wrt. what BIOS
programs (I noticed at least differences in the MG_PLL_BIAS/IREFTRIM and
MG_PLL_BIAS/BIASCAL_EN fields). In the lack of further info on how to
program these fields, just do what the spec says and preserve the BIOS
state.
v2:
- Preserve the BIOS programmed reg fields instead of programming them.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v1)
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615143911.31082-1-imre.deak@intel.com
Lucas De Marchi [Wed, 23 May 2018 18:04:35 +0000 (11:04 -0700)]
drm/i915: remove check for aux irq
This became dead code with commit
309bd8ed464f ("drm/i915: Reinstate
GMBUS and AUX interrupts on gen4/g4x").
v2: Move comment about HW behavior to where decision is made to enable
MSI (Ville).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523180435.18042-1-lucas.demarchi@intel.com
Chris Wilson [Thu, 21 Jun 2018 08:01:50 +0000 (09:01 +0100)]
drm/i915: Redefine EINVAL for debugging
To aide debugging spurious EINVALs, include a debug message every time
we emit one from execbuf.
References: https://bugs.freedesktop.org/show_bug.cgi?id=106744
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621080150.8110-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 21 Jun 2018 07:32:05 +0000 (08:32 +0100)]
drm/i915: Ignore applying the self-relocation BIAS if no relocations
We only need to apply the BIAS for self-relocations into the batchbuffer
iff the execobject has any relocations.
This suppresses some warnings we may get with a full gtt (so the batch
object has wound up at 0 from a previous invocation), but doesn't fix
the underlying problem of how we tried to move a pinned batch vma (how
we have a pinned user vma outside of execbuf, I do not know, though this
being on an aliasing ppgtt means it could be a spurious pinning via the
global gtt). One step at a time...
References: https://bugs.freedesktop.org/show_bug.cgi?id=106744#c1
Testcase: igt/gem_exec_gttfill # byt (sporadic)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621073205.26701-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 20 Jun 2018 13:59:29 +0000 (14:59 +0100)]
drm/i915: Disable bh around call to tasklet
The guc submission backends expects to only be run from (at least)
softirq context, but during our intel_engine_is_idle() check we would
call into the tasklet to make sure it was flushed. As this could occur
from process context, occasionally we would be caught out using a
wait_for_atomic() not from an atomic context:
[ 59.939091] WARN_ON_ONCE((1) && !(preempt_count() != 0))
[ 59.939142] WARNING: CPU: 1 PID: 2901 at drivers/gpu/drm/i915/intel_guc_submission.c:615 guc_submission_tasklet+0x784/0xa90 [i915]
[ 59.939143] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core e1000e snd_pcm mei_me mei prime_numbers
[ 59.939164] CPU: 1 PID: 2901 Comm: gem_exec_schedu Tainted: G U W
4.18.0-rc1-g93475d62c730-drmtip_67+ #1
[ 59.939165] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3610 03/29/2018
[ 59.939188] RIP: 0010:guc_submission_tasklet+0x784/0xa90 [i915]
[ 59.939189] Code: fc ff ff 80 3d 2f 87 11 00 00 0f 85 80 fb ff ff 48 c7 c6 f8 49 40 c0 48 c7 c7 80 41 3e c0 c6 05 14 87 11 00 01 e8 2c ea d6 d3 <0f> 0b e9 5f fb ff ff 8b 46 38 89 cf 31 c7 83 e7 c0 75 08 39 c1 0f
[ 59.939253] RSP: 0018:
ffffaafe08a03c10 EFLAGS:
00010286
[ 59.939255] RAX:
0000000000000000 RBX:
ffff8f9112c246f0 RCX:
0000000000000001
[ 59.939256] RDX:
0000000080000001 RSI:
ffffffff95086d8e RDI:
00000000ffffffff
[ 59.939257] RBP:
ffff8f9112c24680 R08:
000000009517be77 R09:
0000000000000000
[ 59.939258] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8f9112c24700
[ 59.939259] R13:
ffff8f9112c24700 R14:
0000000000000000 R15:
ffff8f9112c242a8
[ 59.939260] FS:
00007fc2cc7e5980(0000) GS:
ffff8f9136c40000(0000) knlGS:
0000000000000000
[ 59.939261] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 59.939262] CR2:
00007fc2cc815040 CR3:
000000021f10e003 CR4:
00000000003606e0
[ 59.939263] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 59.939264] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 59.939265] Call Trace:
[ 59.939288] ? intel_engine_is_idle+0x64/0x160 [i915]
[ 59.939323] ? intel_engine_dump+0x638/0x890 [i915]
[ 59.939327] ? seq_printf+0x49/0x70
[ 59.939353] ? i915_engine_info+0xc8/0x100 [i915]
[ 59.939356] ? drm_get_color_range_name+0x20/0x20
[ 59.939361] ? seq_read+0xf1/0x470
[ 59.939365] ? trace_hardirqs_on_caller+0xe0/0x1b0
[ 59.939370] ? full_proxy_read+0x51/0x80
[ 59.939389] ? __vfs_read+0x31/0x170
[ 59.939395] ? do_sys_open+0x13b/0x240
[ 59.939398] ? rcu_read_lock_sched_held+0x6f/0x80
[ 59.939401] ? vfs_read+0x9e/0x140
[ 59.939404] ? ksys_read+0x50/0xc0
[ 59.939409] ? do_syscall_64+0x55/0x190
[ 59.939412] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.939420] irq event stamp: 552834
[ 59.939422] hardirqs last enabled at (552833): [<
ffffffff940fc74c>] console_unlock+0x3fc/0x600
[ 59.939425] hardirqs last disabled at (552834): [<
ffffffff94a0111c>] error_entry+0x7c/0x100
[ 59.939451] softirqs last enabled at (552614): [<
ffffffffc02e0f53>] i915_request_add+0x2e3/0x7b0 [i915]
[ 59.939470] softirqs last disabled at (552604): [<
ffffffffc02e0ecb>] i915_request_add+0x25b/0x7b0 [i915]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106977
Fixes: dd0cf235d81f ("drm/i915: Speed up idle detection by kicking the tasklets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620135929.23956-1-chris@chris-wilson.co.uk
Rodrigo Vivi [Wed, 20 Jun 2018 21:10:48 +0000 (14:10 -0700)]
drm/i915: Update DRIVER_DATE to
20180620
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Radhakrishna Sripada [Tue, 22 May 2018 00:25:51 +0000 (17:25 -0700)]
drm/i915/icl: Add 10-bit support for hdmi
Starting Icelake silicon supports 10-bpc hdmi to support certain
media workloads. Currently hdmi supports 8 and 12 bpc. Plumbed
in support for 10 bit hdmi.
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522002558.29262-18-paulo.r.zanoni@intel.com
Colin Ian King [Wed, 20 Jun 2018 13:25:43 +0000 (14:25 +0100)]
drm/i915/psr: fix copy-paste error with setting of tp2_wakeup_time_us
Currently for the psr_table->tp2_tp3_wakeup_time case 3 there appears
to be a copy-paste error from the previous switch statement where
dev_priv->vbt.psr.tp1_wakeup_time_us is being assigned and I believe
it should be dev_priv->vbt.psr.tp2_tp3_wakeup_time_us that should be
assigned instead.
Detected by CoverityScan, CID#
1470105 ("Copy-paste error")
Fixes: 77312ae8f071 ("drm/i915/psr: vbt change for psr")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620132543.28092-1-colin.king@canonical.com
Dhinakaran Pandiyan [Mon, 18 Jun 2018 22:02:07 +0000 (15:02 -0700)]
drm/i915/psr: Fix warning in intel_psr_activate()
commit
5422b37c907e ("drm/i915/psr: Kill delays when activating psr
back.") removed the call to cancel a scheduled psr_work from
psr_disable() and instead added an early return in the work function. But,
if the scheduled work item is executed after psr_enable(), we end up
printing warnings as PSR is already enabled and active. So, put the
cancel_work call back in psr_disable().
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 5422b37c907e ("drm/i915/psr: Kill delays when activating psr back.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106948
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618220207.2778-1-dhinakaran.pandiyan@intel.com
Chris Wilson [Wed, 20 Jun 2018 11:24:41 +0000 (12:24 +0100)]
drm/i915/selftests: Avoid ERR_PTR dereference
Along the early error path for igt_switch_to_kernel_context we may try
to dereference an invalid error pointer. Instead, return early rather
than dump the GEM trace since we haven't yet emitted anything of
interest.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 09a4c02e58c1 ("drm/i915: Look for an active kernel context before switching")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620112441.13085-1-chris@chris-wilson.co.uk
Rodrigo Vivi [Tue, 19 Jun 2018 21:44:35 +0000 (14:44 -0700)]
Merge tag 'gvt-next-2018-06-19' of https://github.com/intel/gvt-linux into drm-intel-next-queued
gvt-next-2018-06-19
- fine-grained per vgpu locking (Colin)
- fine-grained vgpu scheduler locking (Colin)
- deliver windows guest cursor hotspot info (Tina)
- GVT-g BXT support (Colin)
- other misc and checker fixes (Chris, Xinyun)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619090043.ly6gquafbmxuus6h@zhen-hp.sh.intel.com
Jani Nikula [Tue, 19 Jun 2018 12:44:37 +0000 (15:44 +0300)]
drm/i915/audio: constify ELD pointers
The hooks aren't supposed to modify the ELD, so use const pointer. As a
drive-by fix, use drm_eld_size() to log ELD size.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619124437.10982-1-jani.nikula@intel.com
Ville Syrjälä [Fri, 15 Jun 2018 17:44:06 +0000 (20:44 +0300)]
drm/i915: Enforce max hdisplay/hblank_start limits on HSW/BDW FDI
The PCH transcoder registers are only 12 bits wide for the hdisplay
and hblank_start values. On HSW/BDW the CPU side registers are 13
bits wide. intel_mode_valid() only checks against the higher limit
(since we don't know where the mode is to be used), so an extra
check is required against the FDI limits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-3-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Ville Syrjälä [Fri, 15 Jun 2018 17:44:05 +0000 (20:44 +0300)]
drm/i915: Check timings against hardware maximums
Validate that all display timings fit within the number of bits
we have in the transcoder timing registers.
The limits are:
hsw+:
4k: vdisplay, vblank_start
8k: everything else
gen3+:
4k: h/vdisplay, h/vblank_start
8k: everything else
gen2:
2k: h/vdisplay, h/vblank_start
4k: everything else
Also document the fact that the mode_config.max_width/height limits
refer to just the max framebuffer dimensions we support. Which may
be larger than the max hdisplay/vdisplay.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-2-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Ville Syrjälä [Fri, 15 Jun 2018 17:44:04 +0000 (20:44 +0300)]
drm/i915: Nuke the cursor size defines
No point in having this extra indireciton for the cursor max size.
So drop the defines and just write out the raw numbers. Makes it
easier to see what's going on.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-1-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Ville Syrjälä [Mon, 11 Jun 2018 19:34:03 +0000 (22:34 +0300)]
drm/i915: Print prop name/id when rejecting it
Use the '[PROP:id:name]' format I introduced for the core in the driver
debug messages as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Vathsala Nagaraju [Mon, 18 Jun 2018 06:12:06 +0000 (11:42 +0530)]
drm/i915/psr: Adds psrwake options for all platforms
Adds new psrwake options defined in the below table.
Platform PSR wake options vbt version
KBL/CFL/WHL All(205+)
BXT Uses old interpretation.
CNL/ICL+ All(205+)
GLK All(205+)
SKL All PV releases (Check for 205+ might help but cannot be foolproof)
We will continue with newer interpretation for SKL from 205.
v2: Jani
Keep the bdb version check.
v3:
Apply newer version for skl from 205+(DK).
Add (version check && platform list) (Jani).
Add bdb version for each platform in commit message(DK).
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Puthikorn Voravootivat <puthik@chromium.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ashutosh D Shukla <ashutosh.d.shukla@intel.com>
Cc: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1529302326-3567-1-git-send-email-vathsala.nagaraju@intel.com
Arnd Bergmann [Mon, 18 Jun 2018 15:38:43 +0000 (17:38 +0200)]
i915: remove timespec_to_jiffies_timeout
This function has been unused since commit
5ed0bdf21a85 ("drm: i915:
Use nsec based interfaces"). Let's remove the definition as well now
to help get rid of all uses of 'timespec'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618153855.2126048-1-arnd@arndb.de
Dhinakaran Pandiyan [Sat, 16 Jun 2018 00:05:30 +0000 (17:05 -0700)]
drm/i915/icl: Handle hotplug interrupts for DP over TBT
This patch enables hotplug interrupts for DP over TBT output on TC
ports. The TBT interrupts are enabled and handled irrespective of the
actual output type which could be DP Alternate, DP over TBT, native DP
or native HDMI.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616000530.5357-3-paulo.r.zanoni@intel.com
Dhinakaran Pandiyan [Sat, 16 Jun 2018 00:05:29 +0000 (17:05 -0700)]
drm/i915/icl: Support for TC North Display interrupts
The hotplug interrupts for the ports can be routed to either North
Display or South Display depending on the output mode. DP Alternate or
DP over TBT outputs will have hotplug interrupts routed to the North
Display while interrupts for legacy modes will be routed to the South
Display in PCH. This patch adds hotplug interrupt handling support for
DP Alternate mode.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[Paulo: coding style changes]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616000530.5357-2-paulo.r.zanoni@intel.com
Dhinakaran Pandiyan [Sat, 16 Jun 2018 00:05:28 +0000 (17:05 -0700)]
drm/i915/icl: GSE interrupt moves from DE_MISC to GU_MISC
The Graphics System Event(GSE) interrupt bit has a new location in the
GU_MISC_INTERRUPT_{IIR, ISR, IMR, IER} registers. Since GSE was the only
DE_MISC interrupt that was enabled, with this change we don't enable/handle
any of DE_MISC interrupts for gen11. Credits to Paulo for pointing out
the register change.
v2: from DK
raw_reg_[read/write], branch prediction hint and drop platform check (Mika)
v3: From DK
Early re-enable of master interrupt (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[Paulo: bikesheds and rebases]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616000530.5357-1-paulo.r.zanoni@intel.com
Paulo Zanoni [Tue, 12 Jun 2018 23:56:54 +0000 (16:56 -0700)]
drm/i915/i915_reg.h: fix the checkpatch MACRO_ARG_PRECEDENCE issues
While I don't see any issue with the way these macros are being called
today, let's protect them against operator precedence issues before
they happen.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612235654.7914-4-paulo.r.zanoni@intel.com
Paulo Zanoni [Tue, 12 Jun 2018 23:56:53 +0000 (16:56 -0700)]
drm/i915/i915_reg.h: fix the checkpatch SPACE_BEFORE_TAB issues
Since I'm touching the file I might as well fix this class of errors
since they are just a few. Also drive-by fix the styling of the
VLV_TURBO_SOC_OVERRIDE definitions instead of just the spaces before
the tabs.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612235654.7914-3-paulo.r.zanoni@intel.com
Paulo Zanoni [Mon, 18 Jun 2018 18:09:43 +0000 (11:09 -0700)]
drm/i915/i915_reg.h: fix the checkpatch SPACING issues
Because OCD.
Now seriously, commit
1aa920ea0e85 ("drm/i915: add register macro
definition style guide") has finally established a coding standard to
be followed by the rest of the file, and I've been trying to request
everybody to adhere to that since then. The problem is that when
someone adds a new line to a register that has the wrong style, these
people generally propagate the wrong style and I have to keep asking
them to drive-by fix the whole register, which is not something I like
to do and also creates extra work for them. Or I can ignore the
propagation of the wrong coding style and feel anxious about it. On
top of that, we now have our CI happily reminding us about these
problems, which makes everything worse.
So IMHO the best way to proceed is to fix the spacing issues in the
file once and for all. Contributors will stop propagating the bad
style when adding new bits to registers that already have bad style,
we will stop asking them to redo their patches and the CI emails will
become more relevant by having less semi-false errors.
Yes, there will be some pain involved for backporters, but at least
spacing issues like that are easy to spot and fix in the patch files.
This patch was generated by:
../../../../scripts/checkpatch.pl -f --strict --types SPACING \
--fix-inplace i915_reg.h
I manually checked the output and everything seems sane.
v2: Single conflict around the addition of DP_TP_CTL_LINK_TRAIN_PAT4.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618180943.894-1-paulo.r.zanoni@intel.com
Radhakrishna Sripada [Thu, 7 Jun 2018 19:20:13 +0000 (12:20 -0700)]
drm/i915/audio: Add 810 MHz clock entries to dp_aud_n_m table
Expand the Maud/Naud table according to DP 1.4 spec to include entries for
810 MHz clock. This is required for audio to work with HBR3.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607192013.25872-1-radhakrishna.sripada@intel.com
José Roberto de Souza [Thu, 14 Jun 2018 23:37:20 +0000 (16:37 -0700)]
drm/i915/aml: Introducing Amber Lake platform
Amber Lake uses the same gen graphics as Kaby Lake, including a id
that were previously marked as reserved on Kaby Lake, but that
now is moved to AML page.
So, let's just move it to AML macro that will feed into KBL macro
just to keep it better organized to make easier future code review
but it will be handled as a KBL.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614233720.30517-2-jose.souza@intel.com
José Roberto de Souza [Thu, 14 Jun 2018 23:37:19 +0000 (16:37 -0700)]
drm/i915/whl: Introducing Whiskey Lake platform
Whiskey Lake uses the same gen graphics as Coffe Lake, including some
ids that were previously marked as reserved on Coffe Lake, but that
now are moved to WHL page.
So, let's just move them to WHL macros that will feed into CFL macro
just to keep it better organized to make easier future code review
but it will be handled as a CFL.
v2:
Fixing GT level of some ids
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614233720.30517-1-jose.souza@intel.com
Chris Wilson [Mon, 18 Jun 2018 09:41:50 +0000 (10:41 +0100)]
drm/i915/execlists: Pull the w/a LRI emission into a helper
Having the w/a registers as an open-coded table leaves a trap for the
unwary; it would be easy to miss incrementing the LRI counter when
adding a new register to the list. Instead, pull the list of registers
into a table, so that we only need add new registers to that table
rather than try and remember important side-effects of earlier chunks of
GPU instructions.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618094150.30895-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 18 Jun 2018 07:31:35 +0000 (08:31 +0100)]
drm/i915: Only show debug for state changes when banning
Since we trigger 10,000s of hangs and resets during selftesting, we emit
many, many thousands of lines of useless debug messages. Reduce the
frequency by only logging a change in state of a guilty context.
Fixes: 14921f3cef85 ("drm/i915: Fix context ban and hang accounting for client")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618073135.10849-1-chris@chris-wilson.co.uk
Jani Nikula [Tue, 12 Jun 2018 09:19:35 +0000 (12:19 +0300)]
drm/i915/lspcon: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e132575785d9b615208eb60ee5e388df5991172.1528794959.git.jani.nikula@intel.com
Jani Nikula [Tue, 12 Jun 2018 09:19:34 +0000 (12:19 +0300)]
drm/i915/audio: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/808b06e1f0a95a4ee892553abf11fdbc30025571.1528794959.git.jani.nikula@intel.com
Jani Nikula [Tue, 12 Jun 2018 09:19:33 +0000 (12:19 +0300)]
drm/i915/backlight: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e68c3f16738eb3ab9f276d797f20326ed6d15848.1528794959.git.jani.nikula@intel.com
Jani Nikula [Tue, 12 Jun 2018 09:56:21 +0000 (12:56 +0300)]
drm/i915/dvo: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.
v2: fix checkpatch warning on indentation
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612095621.21101-1-jani.nikula@intel.com
Jani Nikula [Tue, 12 Jun 2018 09:19:31 +0000 (12:19 +0300)]
drm/i915/uncore: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4af5f30fc9665d1bed1eed09e7f749737749d739.1528794959.git.jani.nikula@intel.com
Jani Nikula [Tue, 12 Jun 2018 09:19:30 +0000 (12:19 +0300)]
drm/i915/hdmi: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d8b79de3d52e1fcaeabf3abfbb2ed99c4397ff2b.1528794959.git.jani.nikula@intel.com
Jani Nikula [Tue, 12 Jun 2018 09:19:29 +0000 (12:19 +0300)]
drm/i915/vbt: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed5de29c280797b20eb625d52592dcbba8326684.1528794959.git.jani.nikula@intel.com
Chris Wilson [Sat, 16 Jun 2018 20:25:34 +0000 (21:25 +0100)]
drm/i915: Fix fallout of fake reset along resume
commit
b2209e62a450 ("drm/i915/execlists: Reset the CSB head tracking on
reset/sanitization") and commit
1288786b18f7 ("drm/i915: Move GEM sanitize
from resume_early to resume") show the conflicting requirements on the
code. We must reset the GPU before trashing live state on a fast resume
(hibernation debug, or error paths), but we must only reset our state
tracking iff the GPU is reset (or power cycled). This is tricky if we
are disabling GPU reset to simulate broken hardware; we reset our state
tracking but the GPU is left intact and recovers from its stale state.
v2: Again without the assertion for forcewake, no longer required since
commit
b3ee09a4de33 ("drm/i915/ringbuffer: Fix context restore upon reset")
as the contexts are reset from the CS ensuring everything is powered up.
Fixes: b2209e62a450 ("drm/i915/execlists: Reset the CSB head tracking on reset/sanitization")
Fixes: 1288786b18f7 ("drm/i915: Move GEM sanitize from resume_early to resume")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616202534.18767-1-chris@chris-wilson.co.uk
projects / openwrt / staging / blogic.git / log