Felix Fietkau [Thu, 27 Feb 2014 23:02:37 +0000 (23:02 +0000)]
cns3xxx: ethernet - resolve SMP issue
The combination of r35942 and r35952 causes an issue where eth_schedule_poll()
can be called from a different CPU between the call to napi_complete() and the
setting of cur_index which can break the rx ring accounting and cause ethernet
latency and/or ethernet stalls. The issue can be easilly created by adding
a couple of artificial delays such as:
@@ -715,6 +715,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
if (!received) {
napi_complete(napi);
+udelay(1000);
enable_irq(IRQ_CNS3XXX_SW_R0RXC);
}
@@ -727,6 +728,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
rx_ring->cur_index = i;
wmb();
+udelay(1000);
enable_rx_dma(sw);
return received;
This patch moves the setting of cur_index back up where it needs to be and
addresses the original corner case that r35942 was trying to catch in an
improved fashion by checking to see if the rx descriptor ring has become
full before interrupts were re-enabled so that a poll can be scheduled again
and avoid an rx stall caused by rx interrupts ceasing to fire again.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39761
Luka Perkov [Thu, 27 Feb 2014 22:41:40 +0000 (22:41 +0000)]
imx6: optimize for NEON FPU hardware
The IMX6 SoC uses an ARM Cortext-A9 which has both NEON and VFPv3 hardware
blocks. This will tune gcc to use neon instead of vfpv3 which will outperform
VFPv3.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39760
Luka Perkov [Thu, 27 Feb 2014 22:41:39 +0000 (22:41 +0000)]
imx6: enable FPU for hard float
The OpenWrt build system uses MACHINE_FEATURES of fpu to set the HAS_FPU which
in turn sets the default of CONFIG_SOFT_FLOAT as well as uClibc configuration.
As the IMX6 SoC has both vfpv3 and NEON hardware support we want to add fpu
to the feature list. This will default the IMX6 target to use -mfloat-abi=hard
which will the be most efficient use of floating point.
When switching to hard float, we also need to enable VFP support in the kernel.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39759
Felix Fietkau [Thu, 27 Feb 2014 21:36:28 +0000 (21:36 +0000)]
ath5k: fix enabling 5/10 mhz channel bandwidth support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39758
Steven Barth [Thu, 27 Feb 2014 12:42:38 +0000 (12:42 +0000)]
netifd: Reintroduce link-layer sensing (thx Hans Decker, Karl Vogel)
SVN-Revision: 39757
Florian Fainelli [Thu, 27 Feb 2014 00:12:53 +0000 (00:12 +0000)]
realview: fix zImage-initramfs installation
We were copying the actual vmlinux-initramfs.elf kernel which cannot be
launched by QEMU or a real bootloader, use zImage-initramfs instead.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39756
Steven Barth [Wed, 26 Feb 2014 13:27:32 +0000 (13:27 +0000)]
netifd: don't always assume addrs & routes are applied
netifd didn't check the netlink return values and kept assuming
routes are in place even if they weren't
SVN-Revision: 39755
Felix Fietkau [Wed, 26 Feb 2014 12:13:02 +0000 (12:13 +0000)]
musl: move the dependency on BROKEN to the right config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39754
Hauke Mehrtens [Tue, 25 Feb 2014 22:52:33 +0000 (22:52 +0000)]
broadcom-diag: fix compile
BCM47XX_BOARD_LINKSYS_WRT54G was renamed in r39718
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39753
Gabor Juhos [Tue, 25 Feb 2014 17:40:04 +0000 (17:40 +0000)]
ar71xx: fix failsafe acces on several devices
The ar71xx platform always uses the eth0 interface to provide
access to the device in failsafe mode. Due to this, failsafe
access is broken on devices where the LAN ports are connected
to the 'eth1' interface.
Update the relevant script to correctly set the ifname variable
for these devices.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39752
Felix Fietkau [Tue, 25 Feb 2014 10:27:02 +0000 (10:27 +0000)]
ath9k: add fixes for rx processing and baseband hang detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39751
Felix Fietkau [Mon, 24 Feb 2014 21:10:11 +0000 (21:10 +0000)]
toolchain/musl: add version 0.9.15, remove older versions (still broken, but closer to being functional than before)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39750
Felix Fietkau [Mon, 24 Feb 2014 21:09:37 +0000 (21:09 +0000)]
gcc: fix visibility of symbols libgcc.a
Symbols need to be hidden, even for the static variant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39749
Felix Fietkau [Mon, 24 Feb 2014 21:09:03 +0000 (21:09 +0000)]
openssl: use termios instead of termio
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39748
Felix Fietkau [Mon, 24 Feb 2014 21:08:28 +0000 (21:08 +0000)]
libnl-tiny: fix include path to poll.h
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39747
Jonas Gorski [Mon, 24 Feb 2014 15:54:12 +0000 (15:54 +0000)]
brcm63xx: add preliminary support for 3.13
Add support for 3.13 as a development kernel. Mostly untested, only net
booted. If flashed may brick your router or kill your cat.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39746
Jonas Gorski [Mon, 24 Feb 2014 15:53:58 +0000 (15:53 +0000)]
kernel: add missing config symbol to 3.13
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39745
Felix Fietkau [Mon, 24 Feb 2014 15:35:14 +0000 (15:35 +0000)]
eglibc: use version 2.19 by default (lots of fixes, some security related)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39744
Felix Fietkau [Mon, 24 Feb 2014 15:35:10 +0000 (15:35 +0000)]
eglibc: remove versions 2.16 and 2.17 - they are unmaintained
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39743
Felix Fietkau [Mon, 24 Feb 2014 15:35:07 +0000 (15:35 +0000)]
eglibc: add version 2.19
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39742
Felix Fietkau [Mon, 24 Feb 2014 15:03:06 +0000 (15:03 +0000)]
hostapd: link against librt if eglibc is used
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39741
Steven Barth [Mon, 24 Feb 2014 13:37:11 +0000 (13:37 +0000)]
odhcpd: avoid the unspecificed address being advertised as DNS
SVN-Revision: 39740
Steven Barth [Mon, 24 Feb 2014 13:33:45 +0000 (13:33 +0000)]
odhcpd: fix DNS-server and MSR-entries in RA
Similarly to the previously broken address pools, DNS-servers and some
MSRs could be advertised incorrectly as well. This is now fixed.
SVN-Revision: 39739
Jo-Philipp Wich [Sun, 23 Feb 2014 23:42:12 +0000 (23:42 +0000)]
usbreset: fix possible access to uninitialized variable (#15041)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39738
Gabor Juhos [Sun, 23 Feb 2014 21:16:04 +0000 (21:16 +0000)]
x86/rdc: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39737
Gabor Juhos [Sun, 23 Feb 2014 21:16:03 +0000 (21:16 +0000)]
x86/rdc: switch to 3.10 and add broken flag
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39736
Gabor Juhos [Sun, 23 Feb 2014 21:16:02 +0000 (21:16 +0000)]
x86/rdc: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39735
Gabor Juhos [Sun, 23 Feb 2014 21:15:56 +0000 (21:15 +0000)]
x86: fix MTD API usage in the RDC specific board patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39734
Hauke Mehrtens [Sun, 23 Feb 2014 18:51:56 +0000 (18:51 +0000)]
brcm47xx: b44: some fixes in combination with the switch
Let the switch start the carrier and set the duplex mode independently
if this nic is up of not.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39733
Gabor Juhos [Sun, 23 Feb 2014 18:20:32 +0000 (18:20 +0000)]
x86/olpc: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39732
Gabor Juhos [Sun, 23 Feb 2014 18:20:30 +0000 (18:20 +0000)]
x86/olpc: switch to 3.10 and add broken flag
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39731
Gabor Juhos [Sun, 23 Feb 2014 18:20:29 +0000 (18:20 +0000)]
x86/olpc: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39730
Gabor Juhos [Sun, 23 Feb 2014 18:09:33 +0000 (18:09 +0000)]
x86/net5501: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39729
Gabor Juhos [Sun, 23 Feb 2014 18:09:32 +0000 (18:09 +0000)]
x86/net5501: switch to 3.10 and add broken flag
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39728
Gabor Juhos [Sun, 23 Feb 2014 18:09:31 +0000 (18:09 +0000)]
x86/net5501: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39727
Felix Fietkau [Sun, 23 Feb 2014 17:32:26 +0000 (17:32 +0000)]
ubus: update to latest version, fixes lua binding issues and adds fd passing support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39726
Felix Fietkau [Sun, 23 Feb 2014 17:32:22 +0000 (17:32 +0000)]
libubox: update to latest version, improves uloop error handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39725
Felix Fietkau [Sun, 23 Feb 2014 17:32:18 +0000 (17:32 +0000)]
procd: depend on libubox directly to rebuild on ABI changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39724
Felix Fietkau [Sun, 23 Feb 2014 17:32:15 +0000 (17:32 +0000)]
netifd: depend on libubox directly to rebuild on ABI changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39723
Felix Fietkau [Sun, 23 Feb 2014 17:32:11 +0000 (17:32 +0000)]
ubus: declare main version as ABI version for libubus
Reorder BuildPackage calls, as libubox needs to come first for ABI
version handling to work
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39722
Felix Fietkau [Sun, 23 Feb 2014 17:32:07 +0000 (17:32 +0000)]
libubox: declare main version as ABI version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39721
Felix Fietkau [Sun, 23 Feb 2014 17:32:04 +0000 (17:32 +0000)]
build: allow packages to declare ABI versions to detect necessary package rebuilds
If a package directly depends on another package that recently changed
its ABI version, it will be cleaned up and rebuilt (assuming quilt is
not used).
This helps with packages that have no stable ABI, e.g. libubox, ubus,
etc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39720
Hauke Mehrtens [Sun, 23 Feb 2014 16:58:12 +0000 (16:58 +0000)]
brcm47xx: b44: start the phy
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39719
Hauke Mehrtens [Sun, 23 Feb 2014 15:57:37 +0000 (15:57 +0000)]
brcm47xx: fix detection of some Linksys WRT54G* devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39718
Gabor Juhos [Sun, 23 Feb 2014 13:07:24 +0000 (13:07 +0000)]
x86/thincan: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39717
Gabor Juhos [Sun, 23 Feb 2014 13:07:23 +0000 (13:07 +0000)]
x86/thincan: switch to 3.10 and add broken flag
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39716
Gabor Juhos [Sun, 23 Feb 2014 13:07:22 +0000 (13:07 +0000)]
x86/thincan: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39715
Gabor Juhos [Sun, 23 Feb 2014 13:00:23 +0000 (13:00 +0000)]
x86/xen_domu: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39714
Gabor Juhos [Sun, 23 Feb 2014 13:00:21 +0000 (13:00 +0000)]
x86/xen_domu: switch to 3.10 and add broken flag
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39713
Gabor Juhos [Sun, 23 Feb 2014 13:00:16 +0000 (13:00 +0000)]
x86/xen_domu: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39712
Gabor Juhos [Sun, 23 Feb 2014 12:50:19 +0000 (12:50 +0000)]
x86/geos: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39711
Gabor Juhos [Sun, 23 Feb 2014 12:50:18 +0000 (12:50 +0000)]
x86/geos: switch to 3.10 and add broken flag
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39710
Gabor Juhos [Sun, 23 Feb 2014 12:50:16 +0000 (12:50 +0000)]
x86/geos: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39709
Gabor Juhos [Sun, 23 Feb 2014 11:07:58 +0000 (11:07 +0000)]
brcm63xx: update LINUX_VERSION to 3.10.32
Missed from the previous comit.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39708
Gabor Juhos [Sun, 23 Feb 2014 10:59:40 +0000 (10:59 +0000)]
kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39707
Felix Fietkau [Sun, 23 Feb 2014 08:13:28 +0000 (08:13 +0000)]
netifd: update to latest version, fixes wireless device reload handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39706
Gabor Juhos [Sun, 23 Feb 2014 08:11:54 +0000 (08:11 +0000)]
ar71xx: define status LED for the RB91x boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39705
Gabor Juhos [Sun, 23 Feb 2014 08:11:53 +0000 (08:11 +0000)]
ar71xx: rb91x: register GPIO LEDs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39704
Gabor Juhos [Sun, 23 Feb 2014 08:11:52 +0000 (08:11 +0000)]
ar71xx: rb91x: add SPI device for the serial shift register
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.
Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39703
Gabor Juhos [Sun, 23 Feb 2014 08:11:50 +0000 (08:11 +0000)]
ar71xx/mikrotik: enable the 74x164 GPIO driver
That will be used to drive the 74HC595 serial-in/parallel-out
8-bits shift register which can be found on some RouterBOARDs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39702
Gabor Juhos [Sun, 23 Feb 2014 08:11:49 +0000 (08:11 +0000)]
ar71xx: improve platform device support in the gpio-74x164 driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39701
Gabor Juhos [Sun, 23 Feb 2014 07:19:32 +0000 (07:19 +0000)]
ar71xx: rb91x-nand: rewrite to use GPIO API
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39700
Gabor Juhos [Sat, 22 Feb 2014 18:05:32 +0000 (18:05 +0000)]
ar71xx: rb91x: register a gpio-latch platform device
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39699
Gabor Juhos [Sat, 22 Feb 2014 18:05:31 +0000 (18:05 +0000)]
ar71xx/mikrotik: enable the GPIO latch driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39698
Gabor Juhos [Sat, 22 Feb 2014 18:05:29 +0000 (18:05 +0000)]
ar71xx: add a generic GPIO latch driver
It will be used for the Mikrotik boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39697
Gabor Juhos [Sat, 22 Feb 2014 16:26:55 +0000 (16:26 +0000)]
ar71xx/mikrotik: enable small sector erase in the m25p80 driver
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39696
Gabor Juhos [Sat, 22 Feb 2014 16:17:28 +0000 (16:17 +0000)]
ar71xx: spi-ath79: fix initial GPIO CS line setup
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39695
Gabor Juhos [Sat, 22 Feb 2014 16:17:27 +0000 (16:17 +0000)]
ar71xx: refresh unaligned access hacks patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39694
Nicolas Thill [Sat, 22 Feb 2014 15:51:11 +0000 (15:51 +0000)]
target/sunxi: add dependency on sunxi to kmod-wdt-sunxi
SVN-Revision: 39693
Felix Fietkau [Sat, 22 Feb 2014 14:42:48 +0000 (14:42 +0000)]
gianfar: Fix reported number of sent bytes to BQL
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
SVN-Revision: 39692
Felix Fietkau [Sat, 22 Feb 2014 13:57:09 +0000 (13:57 +0000)]
ath5k: mark the current survey channel as being used
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39691
Felix Fietkau [Sat, 22 Feb 2014 13:48:56 +0000 (13:48 +0000)]
ath9k: reduce unnecessary logspam (#14940)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39690
Felix Fietkau [Sat, 22 Feb 2014 13:43:48 +0000 (13:43 +0000)]
ath9k: fix issues with 5/10 mhz channel bandwidth (#14916)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39689
Felix Fietkau [Sat, 22 Feb 2014 13:01:11 +0000 (13:01 +0000)]
ath9k: fix issues that have been plaguing some powersave clients since the tx queueing rework (#14092)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39688
Felix Fietkau [Sat, 22 Feb 2014 13:01:07 +0000 (13:01 +0000)]
ath9k: show more reset causes in debugfs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39687
Felix Fietkau [Sat, 22 Feb 2014 13:01:04 +0000 (13:01 +0000)]
mac80211: merge some upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39686
Felix Fietkau [Sat, 22 Feb 2014 13:01:00 +0000 (13:01 +0000)]
ath9k: enable u-apsd support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39685
Felix Fietkau [Sat, 22 Feb 2014 13:00:55 +0000 (13:00 +0000)]
ath9k: add a tx locking fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39684
Jonas Gorski [Sat, 22 Feb 2014 11:16:58 +0000 (11:16 +0000)]
b53: Make b53_switch_init static
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39683
Jonas Gorski [Sat, 22 Feb 2014 11:16:56 +0000 (11:16 +0000)]
b53: Add BCM53128 switch support
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4867/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39682
Jonas Gorski [Sat, 22 Feb 2014 11:16:52 +0000 (11:16 +0000)]
brcm63xx: fix RG100A/DB120 usb port number
Set usbh ports to 2 to fix #15007.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39681
Jonas Gorski [Sat, 22 Feb 2014 11:16:50 +0000 (11:16 +0000)]
brcm63xx: fix number of usb ports for HW556 variants
Don't only fix up the fallback board, but also all three variants.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39680
Jonas Gorski [Sat, 22 Feb 2014 11:16:48 +0000 (11:16 +0000)]
brcm63xx: add initial support for BCM963268BU_P300 reference board
Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39679
Jonas Gorski [Sat, 22 Feb 2014 11:16:46 +0000 (11:16 +0000)]
brcm63xx: add VW6339GU support
Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39678
Jonas Gorski [Sat, 22 Feb 2014 11:16:44 +0000 (11:16 +0000)]
brcm63xx: fix number of switch ports for BCM63168/63268
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268
has two additional RGMII ports, making it 8.
Fix this by checking the chip variant and applying an appropriate
limit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39677
Jonas Gorski [Sat, 22 Feb 2014 11:16:42 +0000 (11:16 +0000)]
brcm63xx: F@ST2504n board support (image, base-files)
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4730/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39676
Jonas Gorski [Sat, 22 Feb 2014 11:16:40 +0000 (11:16 +0000)]
brcm63xx: F@ST2504n board support
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4729/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39675
Jonas Gorski [Sat, 22 Feb 2014 11:16:38 +0000 (11:16 +0000)]
brcm63xx: add support for Asmax AR 1004g router
Support for Asmax AR 1004g router
Signed-off-by: Adrian Feliks <mexit@o2.pl>
Patchwork: http://patchwork.openwrt.org/patch/4464/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39674
Jonas Gorski [Sat, 22 Feb 2014 11:16:35 +0000 (11:16 +0000)]
brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL router
This adds profile and build image for Sagemcom F@st2704, using b43
driver.
For WiFi to work properly BCMA fallback SPROM support patch must
be applied (http://git.io/z1Ki8A).
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4212/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39673
Jonas Gorski [Sat, 22 Feb 2014 11:16:33 +0000 (11:16 +0000)]
brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL router
This adds userspace support for Sagemcom F@st 2704 router.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4215/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39672
Jonas Gorski [Sat, 22 Feb 2014 11:16:30 +0000 (11:16 +0000)]
brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4266/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39671
Hauke Mehrtens [Fri, 21 Feb 2014 22:57:39 +0000 (22:57 +0000)]
kernel: add missing depends on kmod-mii
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39670
Hauke Mehrtens [Fri, 21 Feb 2014 20:06:41 +0000 (20:06 +0000)]
kexec-tools: disable lzma support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39652
Steven Barth [Fri, 21 Feb 2014 18:02:25 +0000 (18:02 +0000)]
odhcpd: fix wrong address pool being advertised
SVN-Revision: 39651
Imre Kaloz [Fri, 21 Feb 2014 10:39:14 +0000 (10:39 +0000)]
the root password should be empty for real, like before
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39650
Jo-Philipp Wich [Fri, 21 Feb 2014 00:22:23 +0000 (00:22 +0000)]
firewall: fix validation constraints
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39649
Jo-Philipp Wich [Fri, 21 Feb 2014 00:17:04 +0000 (00:17 +0000)]
netifd: fix validation constraints
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39648
Jo-Philipp Wich [Thu, 20 Feb 2014 23:20:10 +0000 (23:20 +0000)]
firewall: fix several ipset integration issues (#15016)
- Do not consider bitmap storage for IPv6 family sets
- Move ipset family parameter before any additional option
- Only emit family parameter for hash sets
- Do not allow IPv6 iprange for IPv4 sets and vice versa
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39647
Steven Barth [Thu, 20 Feb 2014 21:36:15 +0000 (21:36 +0000)]
6in4: add support for he.net updatekey
SVN-Revision: 39646
Luka Perkov [Thu, 20 Feb 2014 17:26:10 +0000 (17:26 +0000)]
imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
- Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
- align pinctrl with upstream
- consolidate multiple patches into one
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39644
projects / openwrt / staging / ansuel.git / log