openwrt/staging/blogic.git
17 years agoUSB: fix transvibrator disconnect race
Oliver Neukum [Fri, 24 Nov 2006 11:55:59 +0000 (12:55 +0100)]
USB: fix transvibrator disconnect race

in disconnect you set the interface's private data to NULL. In your IO
methods you unconditionally follow the pointer into never never land.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Fix oops in PhidgetServo
Sean Young [Wed, 6 Dec 2006 20:27:32 +0000 (20:27 +0000)]
USB: Fix oops in PhidgetServo

The PhidgetServo causes an Oops when any of its sysfs attributes are read
or written too, making the driver useless.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Tue, 19 Dec 2006 18:32:40 +0000 (10:32 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  [PATCH] Generic HID layer - update MAINTAINERS
  input/hid: Supporting more keys from the HUT Consumer Page
  [PATCH] Generic HID layer - build: USB_HID should select HID

17 years ago[CONNECTOR]: Replace delayed work with usual work queue.
Evgeniy Polyakov [Mon, 18 Dec 2006 09:53:58 +0000 (01:53 -0800)]
[CONNECTOR]: Replace delayed work with usual work queue.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4]: Fix BUG of ip_rt_send_redirect()
Li Yewang [Mon, 18 Dec 2006 08:26:35 +0000 (00:26 -0800)]
[IPV4]: Fix BUG of ip_rt_send_redirect()

Fix the redirect packet of the router if the jiffies wraparound.

Signed-off-by: Li Yewang <lyw@nanjing-fnst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Trivial fix to message in tcp_v4_inbound_md5_hash
Leigh Brown [Mon, 18 Dec 2006 01:13:10 +0000 (17:13 -0800)]
[TCP]: Trivial fix to message in tcp_v4_inbound_md5_hash

The message logged in tcp_v4_inbound_md5_hash when the hash was expected
but not found was reversed.

Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Fix oops caused by tcp_v4_md5_do_del
Leigh Brown [Mon, 18 Dec 2006 01:12:30 +0000 (17:12 -0800)]
[TCP]: Fix oops caused by tcp_v4_md5_do_del

md5sig_info.alloced4 must be set to zero when freeing keys4, otherwise
it will not be alloc'd again when another key is added to the same
socket by tcp_v4_md5_do_add.

Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[CONNECTOR]: Fix compilation breakage introduced recently.
Evgeniy Polyakov [Mon, 18 Dec 2006 01:09:41 +0000 (17:09 -0800)]
[CONNECTOR]: Fix compilation breakage introduced recently.

Linus has changed work queue structure and has not tested it with
connector compiled in, his changes break the build.

Attached patch fixes compilation error.

Patch is against commit 99f5e9718185f07458ae70c2282c2153a2256c91.

Thanks to Toralf Förster for pointing this out.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Update version and reldate.
Michael Chan [Mon, 18 Dec 2006 01:08:30 +0000 (17:08 -0800)]
[TG3]: Update version and reldate.

Update version to 3.71.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Power down/up 5906 PHY correctly.
Michael Chan [Mon, 18 Dec 2006 01:08:07 +0000 (17:08 -0800)]
[TG3]: Power down/up 5906 PHY correctly.

The 5906 PHY requires a special register bit to power down and up the
PHY.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Fix race condition when calling register_netdev().
Michael Chan [Mon, 18 Dec 2006 01:07:29 +0000 (17:07 -0800)]
[TG3]: Fix race condition when calling register_netdev().

Hot-plug scripts can call tg3_open() as soon as register_netdev() is
called in tg3_init_one().  We need to call pci_set_drvdata() before
register_netdev(), and netif_carrier_off() needs to be moved to
tg3_open() to avoid race conditions.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Assign tp->link_config.orig_* values.
Michael Chan [Mon, 18 Dec 2006 01:06:46 +0000 (17:06 -0800)]
[TG3]: Assign tp->link_config.orig_* values.

tp->link_config.orig_* values must be assigned during
tg3_set_settings() because these values will be used to setup the
link speed during tg3_open().  Without these assignments, the link
speed settings will be all messed by if tg3_set_settings() is called
when the device is down.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER] IPV6: Fix dependencies.
David S. Miller [Sun, 17 Dec 2006 22:37:23 +0000 (14:37 -0800)]
[NETFILTER] IPV6: Fix dependencies.

Although the menu dependencies in net/ipv6/netfilter/Kconfig
guard the entries in that file from the Kconfig GUI, this does
not prevent them from being selected still via "make oldconfig"
when IPV6 etc. is disabled.

So add explicit dependencies.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[BNX2]: Fix minor loopback problem.
Michael Chan [Thu, 14 Dec 2006 23:57:04 +0000 (15:57 -0800)]
[BNX2]: Fix minor loopback problem.

Use the configured MAC address instead of the permanent MAC address
for loopback frames.

Update version to 1.5.2.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[BNX2]: Fix bug in bnx2_nvram_write().
Michael Chan [Thu, 14 Dec 2006 23:56:50 +0000 (15:56 -0800)]
[BNX2]: Fix bug in bnx2_nvram_write().

Length was not calculated correctly if the NVRAM offset is on a non-
aligned offset.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[BNX2]: Fix panic in bnx2_tx_int().
Michael Chan [Thu, 14 Dec 2006 23:56:32 +0000 (15:56 -0800)]
[BNX2]: Fix panic in bnx2_tx_int().

There was an off-by-one bug in bnx2_tx_avail().  If the tx ring is
completely full, the producer and consumer indices may be apart by
256 even though the ring size is only 255.  One entry in the ring is
unused and must be properly accounted for when calculating the number
of available entries.  The bug caused the tx ring entries to be
reused by mistake, overwriting active entries, and ultimately causing
it to crash.

This bug rarely occurs because the tx ring is rarely completely full.
We always stop when there is less than MAX_SKB_FRAGS entries available
in the ring.

Thanks to Corey Kovacs <cjk@techma.com> and Andy Gospodarek
<agospoda@redhat.com> for reporting the problem and helping to collect
debug information.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked rose_add_loopback_neigh uses
Ralf Baechle [Thu, 14 Dec 2006 23:52:13 +0000 (15:52 -0800)]
[AX.25]: Fix unchecked rose_add_loopback_neigh uses

rose_add_loopback_neigh uses kmalloc and the callers were ignoring the
error value.  Rewrite to let the caller deal with the allocation.  This
allows the use of static allocation of kmalloc use entirely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked rose_add_loopback_node uses
Ralf Baechle [Thu, 14 Dec 2006 23:51:44 +0000 (15:51 -0800)]
[AX.25]: Fix unchecked rose_add_loopback_node uses

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked ax25_linkfail_register uses
Ralf Baechle [Thu, 14 Dec 2006 23:51:23 +0000 (15:51 -0800)]
[AX.25]: Fix unchecked ax25_linkfail_register uses

ax25_linkfail_register uses kmalloc and the callers were ignoring the
error value.  Rewrite to let the caller deal with the allocation.  This
allows the use of static allocation of kmalloc use entirely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked nr_add_node uses.
Ralf Baechle [Thu, 14 Dec 2006 23:50:58 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked nr_add_node uses.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked ax25_listen_register uses
Ralf Baechle [Thu, 14 Dec 2006 23:50:34 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked ax25_listen_register uses

Fix ax25_listen_register to return something that's a sane error code,
then all callers to use it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked ax25_protocol_register uses.
Ralf Baechle [Thu, 14 Dec 2006 23:50:01 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked ax25_protocol_register uses.

Replace ax25_protocol_register by ax25_register_pid which assumes the
caller has done the memory allocation.  This allows replacing the
kmalloc allocations entirely by static allocations.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Mark all kmalloc users __must_check
Ralf Baechle [Thu, 14 Dec 2006 23:49:28 +0000 (15:49 -0800)]
[AX.25]: Mark all kmalloc users __must_check

The recent fix 0506d4068bad834aab1141b5dc5e748eb175c6b3 made obvious that
error values were not being propagated through the AX.25 stack.  To help
with that this patch marks all kmalloc users in the AX.25, NETROM and
ROSE stacks as __must_check.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: replace kmalloc+memset with kzalloc
Yan Burman [Thu, 14 Dec 2006 23:25:00 +0000 (15:25 -0800)]
[TG3]: replace kmalloc+memset with kzalloc

Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Mon, 18 Dec 2006 03:08:11 +0000 (19:08 -0800)]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] longhaul compile fix.
  [CPUFREQ] Advise not to use longhaul on VIA C7.
  [CPUFREQ] set policy->curfreq on initialization
  [CPUFREQ] Trivial cleanup for acpi read/write port in acpi-cpufreq.c
  [CPUFREQ] fixes typo in cpufreq.c

17 years ago[PATCH] more work_struct fixes: tas300x sound drivers
Al Viro [Fri, 8 Dec 2006 09:16:49 +0000 (09:16 +0000)]
[PATCH] more work_struct fixes: tas300x sound drivers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[SPARC]: Make bitops use same spinlocks as atomics.
David S. Miller [Mon, 18 Dec 2006 00:18:47 +0000 (16:18 -0800)]
[SPARC]: Make bitops use same spinlocks as atomics.

Recent workqueue changes basically make this a formal requirement.

Also, move atomic32.o from lib-y to obj-y since it exports symbols
to modules.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[CPUFREQ] longhaul compile fix.
Dave Jones [Mon, 18 Dec 2006 00:09:59 +0000 (19:09 -0500)]
[CPUFREQ] longhaul compile fix.

Some gcc's are more anal than others about empty switch labels.
error: label at end of compound statement

Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] Advise not to use longhaul on VIA C7.
Dave Jones [Mon, 18 Dec 2006 00:07:35 +0000 (19:07 -0500)]
[CPUFREQ] Advise not to use longhaul on VIA C7.

C7's are centrino speedstep-alike.

Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] set policy->curfreq on initialization
Mattia Dongili [Fri, 15 Dec 2006 18:52:45 +0000 (19:52 +0100)]
[CPUFREQ] set policy->curfreq on initialization

Check the correct variable and set policy->cur upon acpi-cpufreq
initialization to allow the userspace governor to be used as default.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[SPARC]: Update defconfig.
David S. Miller [Sun, 17 Dec 2006 22:21:34 +0000 (14:21 -0800)]
[SPARC]: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Mirror x86_64's PERCPU_ENOUGH_ROOM definition.
David S. Miller [Fri, 15 Dec 2006 07:40:57 +0000 (23:40 -0800)]
[SPARC64]: Mirror x86_64's PERCPU_ENOUGH_ROOM definition.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.
Fabrice Knevez [Thu, 14 Dec 2006 23:20:29 +0000 (15:20 -0800)]
[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.

"sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled =
enable" in sunkbd_enable (obvious)

Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[DocBook]: Fix two typos in generic IRQ docs.
David S. Miller [Tue, 12 Dec 2006 09:00:06 +0000 (01:00 -0800)]
[DocBook]: Fix two typos in generic IRQ docs.

desc-status --> desc->status

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Minor irq handling cleanups.
David S. Miller [Tue, 12 Dec 2006 08:59:12 +0000 (00:59 -0800)]
[SPARC64]: Minor irq handling cleanups.

Use struct irq_chip instead of hw_interrupt_type.

Delete hw_resend_irq(), totally unused.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Kill no-remapping-needed code in head.S
David S. Miller [Tue, 12 Dec 2006 05:06:55 +0000 (21:06 -0800)]
[SPARC64]: Kill no-remapping-needed code in head.S

It branches around some necessary prom calls, which we would
need to do even if we are mapped at the correct location already.
So it doesn't work.

The idea was that this sort of thing could be used for the eventual
kexec implementation, but it is clear that this will need to be
done differently.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[PATCH] sys_mincore: s/max/min/
Oleg Nesterov [Sun, 17 Dec 2006 15:52:47 +0000 (18:52 +0300)]
[PATCH] sys_mincore: s/max/min/

fix a typo, sys_mincore() needs min().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus "I'm a moron" Torvalds <torvalds@osdl.org>
17 years ago[PATCH] m68k trivial build fixes
Al Viro [Thu, 14 Dec 2006 15:00:15 +0000 (15:00 +0000)]
[PATCH] m68k trivial build fixes

amikbd: missing declaration
sun3_NCR5380: more work_struct mess
sun3_NCR5380: cast is not an lvalue

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
17 years agoFix up mm/mincore.c error value cases
Linus Torvalds [Sun, 17 Dec 2006 00:01:50 +0000 (16:01 -0800)]
Fix up mm/mincore.c error value cases

Hugh Dickins correctly points out that mincore() is actually _supposed_
to fail on an unmapped hole in the user address space, rather than
return valid ("empty") information about the hole.  This just simplifies
the problem further (I had been misled by our previous confusing and
complicated way of doing mincore()).

Also, in the unlikely situation that we can't allocate a temporary
kernel buffer, we should actually return EAGAIN, not ENOMEM, to keep the
"unmapped hole" and "allocation failure" error cases separate.

Finally, add a comment about our stupid historical lack of support for
anonymous mappings.  I'll fix that if somebody reminds me after 2.6.20
is out.

Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Sat, 16 Dec 2006 21:23:45 +0000 (13:23 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()
  IB/mthca: Add HCA profile module parameters
  IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G
  IB: Fix ib_dma_alloc_coherent() wrapper

17 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Sat, 16 Dec 2006 17:54:23 +0000 (09:54 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] pata_via: Cable detect error
  [PATCH] Fix help text for CONFIG_ATA_PIIX
  [PATCH] initializer entry defined twice in pata_rz1000
  [PATCH] ata: fix platform_device_register_simple() error check
  [PATCH] ahci: do not mangle saved HOST_CAP while resetting controller
  [PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
  [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
  [libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
  [PATCH] ata_piix: use piix_host_stop() in ich_pata_ops
  [PATCH] ata_piix: IDE mode SATA patch for Intel ICH9

17 years agoMake workqueue bit operations work on "atomic_long_t"
Linus Torvalds [Sat, 16 Dec 2006 17:53:50 +0000 (09:53 -0800)]
Make workqueue bit operations work on "atomic_long_t"

On architectures where the atomicity of the bit operations is handled by
external means (ie a separate spinlock to protect concurrent accesses),
just doing a direct assignment on the workqueue data field (as done by
commit 4594bf159f1962cec3b727954b7c598b07e2e737) can cause the
assignment to be lost due to lack of serialization with the bitops on
the same word.

So we need to serialize the assignment with the locks on those
architectures (notably older ARM chips, PA-RISC and sparc32).

So rather than using an "unsigned long", let's use "atomic_long_t",
which already has a safe assignment operation (atomic_long_set()) on
such architectures.

This requires that the atomic operations use the same atomicity locks as
the bit operations do, but that is largely the case anyway.  Sparc32
will probably need fixing.

Architectures (including modern ARM with LL/SC) that implement sane
atomic operations for SMP won't see any of this matter.

Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: David Miller <davem@davemloft.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Linux Arch Maintainers <linux-arch@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoFix incorrect user space access locking in mincore()
Linus Torvalds [Sat, 16 Dec 2006 17:44:32 +0000 (09:44 -0800)]
Fix incorrect user space access locking in mincore()

Doug Chapman noticed that mincore() will doa "copy_to_user()" of the
result while holding the mmap semaphore for reading, which is a big
no-no.  While a recursive read-lock on a semaphore in the case of a page
fault happens to work, we don't actually allow them due to deadlock
schenarios with writers due to fairness issues.

Doug and Marcel sent in a patch to fix it, but I decided to just rewrite
the mess instead - not just fixing the locking problem, but making the
code smaller and (imho) much easier to understand.

Cc: Doug Chapman <dchapman@redhat.com>
Cc: Marcel Holtmann <holtmann@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] pata_via: Cable detect error
Alan [Sat, 16 Dec 2006 14:32:21 +0000 (14:32 +0000)]
[PATCH] pata_via: Cable detect error

The UDMA66 VIA hardware has no controller side cable detect bits we can
use. This patch minimally fixes the problem by reporting unknown in this
case and using drive side detection.

The old drivers/ide code does some additional tricks but those aren't
appropriate now we are in -rc.

Without this update UDMA66 via controllers run slowly. They don't fail so
it's a borderline call whether this is -rc material or not.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] Fix help text for CONFIG_ATA_PIIX
Alan [Sat, 16 Dec 2006 12:54:29 +0000 (12:54 +0000)]
[PATCH] Fix help text for CONFIG_ATA_PIIX

> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work
> correctly. The help text is a bit confusing:
>
> config ATA_PIIX
>         tristate "Intel PIIX/ICH SATA support"
>         depends on PCI
>         help
>           This option enables support for ICH5/6/7/8 Serial ATA.
>           If PATA support was enabled previously, this enables
>           support for select Intel PIIX/ICH PATA host controllers.

New help text

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] initializer entry defined twice in pata_rz1000
Ira Snyder [Fri, 15 Dec 2006 21:08:52 +0000 (13:08 -0800)]
[PATCH] initializer entry defined twice in pata_rz1000

This removes the extra definition of the .error_handler member
in the pata_rz1000 driver.

Signed-off-by: Ira W. Snyder <kernel@irasnyder.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ata: fix platform_device_register_simple() error check
Akinobu Mita [Fri, 15 Dec 2006 21:08:51 +0000 (13:08 -0800)]
[PATCH] ata: fix platform_device_register_simple() error check

The return value of platform_device_register_simple() should be checked
by IS_ERR().

Cc: Jeff Garzik <jgarzik@pobox.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ahci: do not mangle saved HOST_CAP while resetting controller
Tejun Heo [Tue, 12 Dec 2006 11:17:32 +0000 (20:17 +0900)]
[PATCH] ahci: do not mangle saved HOST_CAP while resetting controller

Do not mangle with HOST_CAP while resetting controller.  The code is
there for a historical reason.  The mangling breaks controller feature
detection and 0 PORTS_IMPL workaround code.

This problem was spotted by Manoj Kasichainula.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Manoj Kasichainula <manoj@io.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
Tejun Heo [Mon, 11 Dec 2006 17:15:31 +0000 (02:15 +0900)]
[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)

Calling sg_init_one() with NULL buf causes oops on certain
configurations.  Don't initialize sg in ata_exec_internal() if
DMA_NONE and make the function complain if @buf is NULL when dma_dir
isn't DMA_NONE.  While at it, fix comment.

The problem is discovered and initial patch was submitted by Arnd
Bergmann.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
Jeff Garzik [Thu, 14 Dec 2006 22:04:33 +0000 (17:04 -0500)]
[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)

Current Broadcom/Serverworks SATA boards (including Apple K2 SATA)
have problems with ATAPI DMA, so it is disabled.  ATAPI PIO, ATA PIO,
and ATA DMA continue to work just fine.

Acked-by: Anantha Subramanyam <ananth@broadcom.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
Jeff Garzik [Mon, 11 Dec 2006 16:05:53 +0000 (11:05 -0500)]
[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator

We are inside spin_lock_irqsave().  quoth akpm's debug facility:

 [  231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
 [  232.232000] ata1.00: configured for UDMA/33
 [  232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic()
 [  232.404000]  [<c01162e6>] kmap_atomic+0xa9/0x1ab
 [  232.404000]  [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30
 [  232.404000]  [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87
 [  232.404000]  [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309
 [  232.404000]  [<c01729d5>] end_bio_bh_io_sync+0x0/0x37
 [  232.404000]  [<c02311c6>] scsi_done+0x0/0x16
 [  232.404000]  [<c02311c6>] scsi_done+0x0/0x16
 [  232.404000]  [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f
[...]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ata_piix: use piix_host_stop() in ich_pata_ops
Tejun Heo [Mon, 11 Dec 2006 13:26:25 +0000 (22:26 +0900)]
[PATCH] ata_piix: use piix_host_stop() in ich_pata_ops

piix_init_one() allocates host private data which should be freed by
piix_host_stop().  ich_pata_ops wasn't converted to piix_host_stop()
while merging, leaking 4 bytes on driver detach.  Fix it.

This was spotted using Kmemleak by Catalin Marinas.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Catalin Marinas <catalin.marinas@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9
Jason Gaston [Thu, 7 Dec 2006 16:57:32 +0000 (08:57 -0800)]
[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9

This updated patch adds the Intel ICH9 IDE mode SATA controller DID's.

Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoIB/mthca: Use DEFINE_MUTEX() instead of mutex_init()
Roland Dreier [Sat, 16 Dec 2006 04:55:28 +0000 (20:55 -0800)]
IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()

mthca_device_mutex() can be initialized automatically with
DEFINE_MUTEX() rather than explicitly calling mutex_init().  This
saves a bit of text and shrinks the source by a line, so we may as
well do it....

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/mthca: Add HCA profile module parameters
Leonid Arsh [Sun, 10 Dec 2006 11:40:17 +0000 (13:40 +0200)]
IB/mthca: Add HCA profile module parameters

Add module parameters that enable settting some of the HCA
profile values, such as the number of QPs, CQs, etc.

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoFix "delayed_work_pending()" macro expansion
Linus Torvalds [Fri, 15 Dec 2006 22:13:51 +0000 (14:13 -0800)]
Fix "delayed_work_pending()" macro expansion

Nobody uses it, but it was still wrong.  Using the macro argument name
'work' meant that when we used 'work' as a member name, that would also
get replaced by the macro argument.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoIB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G
Roland Dreier [Fri, 15 Dec 2006 22:01:49 +0000 (14:01 -0800)]
IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G

struct srp_device.fmr_page_mask was unsigned long, which means that
the top part of addresses above 4G was being chopped off on 32-bit
architectures.  Of course nothing good happens when data from SRP
targets is DMAed to the wrong place.

Fix this by changing fmr_page_mask to u64, to match the addresses
actually used by IB devices.

Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen
<davem@systemfabricworks.com> for help diagnosing the bug and testing
the fix.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB: Fix ib_dma_alloc_coherent() wrapper
Roland Dreier [Fri, 15 Dec 2006 21:57:26 +0000 (13:57 -0800)]
IB: Fix ib_dma_alloc_coherent() wrapper

The ib_dma_alloc_coherent() wrapper uses a u64* for the dma_handle
parameter, unlike dma_alloc_coherent, which uses dma_addr_t*.  This
means that we need a temporary variable to handle the case when
ib_dma_alloc_coherent() just falls through directly to
dma_alloc_coherent() on architectures where sizeof u64 != sizeof
dma_addr_t.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 15 Dec 2006 18:22:22 +0000 (10:22 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] cio: css_register_subchannel race.
  [S390] Save prefix register for dump on panic
  [S390] Fix reboot hang
  [S390] Fix reboot hang on LPARs
  [S390] sclp_cpi module license.
  [S390] zcrypt: module unload fixes.
  [S390] Hipersocket multicast queue: make sure outbound handler is called
  [S390] hypfs fixes
  [S390] update default configuration

17 years agoRemove stack unwinder for now
Linus Torvalds [Fri, 15 Dec 2006 16:43:13 +0000 (08:43 -0800)]
Remove stack unwinder for now

It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed.  We can put it back when
it's stable and isn't likely to make warning or bug events worse.

In the meantime, enable frame pointers for more readable stack traces.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[S390] cio: css_register_subchannel race.
Stefan Bader [Fri, 15 Dec 2006 16:18:30 +0000 (17:18 +0100)]
[S390] cio: css_register_subchannel race.

Asynchronous probe can release memory of a subchannel before
css_get_ssd_info is called. To fix this call css_get_ssd_info
before registering with driver core.

Signed-off-by: Stefan Bader <shbader@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Save prefix register for dump on panic
Michael Holzheu [Fri, 15 Dec 2006 16:18:27 +0000 (17:18 +0100)]
[S390] Save prefix register for dump on panic

The dump tools expect that the saved prefix register points to the
lowcore of the dump cpu. Since we set the prefix register to 0 during
reipl/dump, we have to save the original prefix register. Before we
start the dump program, we copy the original prefix register to the
designated location in the lowcore.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Fix reboot hang
Michael Holzheu [Fri, 15 Dec 2006 16:18:25 +0000 (17:18 +0100)]
[S390] Fix reboot hang

We use printks after shutting down all other cpus. This is not allowed
and can lead to deadlocks. Therefore the printks have to be removed.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Fix reboot hang on LPARs
Michael Holzheu [Fri, 15 Dec 2006 16:18:22 +0000 (17:18 +0100)]
[S390] Fix reboot hang on LPARs

Reboot hangs on LPARs without diag308 support. The reason for this is,
that before the reboot is done, the channel subsystem is shut down.
During the reset on each possible subchannel a "store subchannel" is
done. This operation can end in a program check interruption, if the
specified subchannel set is not implemented by the hardware. During
the reset, currently we do not have a program check handler, which
leads to the described kernel bug. We install now a new program check
handler for the reboot code to fix this problem.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] sclp_cpi module license.
Christian Borntraeger [Fri, 15 Dec 2006 16:18:20 +0000 (17:18 +0100)]
[S390] sclp_cpi module license.

sclp_cpi is GPL. Make the module not taint the kernel

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] zcrypt: module unload fixes.
Ralph Wuerthner [Fri, 15 Dec 2006 16:18:17 +0000 (17:18 +0100)]
[S390] zcrypt: module unload fixes.

Add code to reset all queues for a domain and add missing tasklet_kill
call to ap bus module exit code.

Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Hipersocket multicast queue: make sure outbound handler is called
Ursula Braun [Fri, 15 Dec 2006 16:18:14 +0000 (17:18 +0100)]
[S390] Hipersocket multicast queue: make sure outbound handler is called

A HiperSocket multicast queue works asynchronously. When sending
buffers, the buffer state change from PRIMED to EMPTY may happen
delayed. Reschedule the checking for changes in the outbound queue,
if there are still PRIMED buffers.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] hypfs fixes
Christian Borntraeger [Fri, 15 Dec 2006 16:18:10 +0000 (17:18 +0100)]
[S390] hypfs fixes

Correct typo to make hypfs work on systems that support only diag204
subcode 4 and fix error handling in hypfs_diag_init.

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] update default configuration
Martin Schwidefsky [Fri, 15 Dec 2006 16:17:57 +0000 (17:17 +0100)]
[S390] update default configuration

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[PATCH] Generic HID layer - update MAINTAINERS
Jiri Kosina [Thu, 14 Dec 2006 11:03:30 +0000 (12:03 +0100)]
[PATCH] Generic HID layer - update MAINTAINERS

Update MAINTAINERS entry for HID core layer.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
17 years agoinput/hid: Supporting more keys from the HUT Consumer Page
Florian Festi [Thu, 14 Dec 2006 10:59:11 +0000 (11:59 +0100)]
input/hid: Supporting more keys from the HUT Consumer Page

On USB keyboards lots of hot/internet keys are not working. This patch
adds support for a number of keys from the USB HID Usage Table
(http://www.usb.org/developers/devclass_docs/Hut1_12.pdf).

It also adds several new key codes. Most of them are used on real world
keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE,
NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes".

I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a
remote control  in parallel and it makes sense to have them behave differently.

Signed-off-by: Florian Festi <ffesti@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
17 years ago[PATCH] Generic HID layer - build: USB_HID should select HID
Jiri Kosina [Thu, 14 Dec 2006 10:49:53 +0000 (11:49 +0100)]
[PATCH] Generic HID layer - build: USB_HID should select HID

Let CONFIG_USB_HID imply CONFIG_HID. Making it only dependent might confuse
users to choose CONFIG_HID, but no particular HID transport drivers.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
17 years ago[PATCH] ib_verbs: Use explicit if-else statements to avoid errors with do-while macros
Ben Collins [Thu, 14 Dec 2006 03:10:05 +0000 (22:10 -0500)]
[PATCH] ib_verbs: Use explicit if-else statements to avoid errors with do-while macros

At least on PPC, the "op ? op : dma" construct causes a compile failure
because the dma_* is a do{}while(0) macro.

This turns all of them into proper if/else to avoid this problem.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoLinux v2.6.20-rc1
Linus Torvalds [Thu, 14 Dec 2006 01:14:23 +0000 (17:14 -0800)]
Linux v2.6.20-rc1

.. and so the stabilization phase starts.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[NETFILTER]: bridge-netfilter: remove deferred hooks
Patrick McHardy [Thu, 14 Dec 2006 00:54:25 +0000 (16:54 -0800)]
[NETFILTER]: bridge-netfilter: remove deferred hooks

Remove the deferred hooks and all related code as scheduled in
feature-removal-schedule.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV6]: Make fib6_node subtree depend on IPV6_SUBTREES
Kim Nordlund [Thu, 14 Dec 2006 00:38:29 +0000 (16:38 -0800)]
[IPV6]: Make fib6_node subtree depend on IPV6_SUBTREES

Make fib6_node 'subtree' depend on IPV6_SUBTREES.

Signed-off-by: Kim Nordlund <kim.nordlund@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Add support for SCTP_CONTEXT socket option.
Ivan Skytte Jorgensen [Thu, 14 Dec 2006 00:34:22 +0000 (16:34 -0800)]
[SCTP]: Add support for SCTP_CONTEXT socket option.

Signed-off-by: Ivan Skytte Jorgensen <isj-sctp@i1.dk>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Enable auto loading of SCTP when creating an ipv6 SCTP socket.
Sridhar Samudrala [Thu, 14 Dec 2006 00:33:35 +0000 (16:33 -0800)]
[SCTP]: Enable auto loading of SCTP when creating an ipv6 SCTP socket.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Handle address add/delete events in a more efficient way.
Sridhar Samudrala [Thu, 14 Dec 2006 00:26:26 +0000 (16:26 -0800)]
[SCTP]: Handle address add/delete events in a more efficient way.

Currently in SCTP, we maintain a local address list by rebuilding the whole
list from the device list whenever we get a address add/delete event.

This patch fixes it by only adding/deleting the address for which we
receive the event.

Also removed the sctp_local_addr_lock() which is no longer needed as we
now use list_for_each_safe() to traverse this list. This fixes the bugs
in sctp_copy_laddrs_xxx() routines where we do copy_to_user() while
holding this lock.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Fix oops caused by __tcp_put_md5sig_pool()
David S. Miller [Thu, 14 Dec 2006 00:25:44 +0000 (16:25 -0800)]
[TCP]: Fix oops caused by __tcp_put_md5sig_pool()

It should call tcp_free_md5sig_pool() not __tcp_free_md5sig_pool()
so that it does proper refcounting.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV6]: Fix IPV6_UNICAST_HOPS getsockopt().
Brian Haley [Wed, 13 Dec 2006 01:09:49 +0000 (17:09 -0800)]
[IPV6]: Fix IPV6_UNICAST_HOPS getsockopt().

> Relevant standard (RFC 3493) notes:
>
>    The IPV6_UNICAST_HOPS option may be used with getsockopt() to
>    determine the hop limit value that the system will use for subsequent
>    unicast packets sent via that socket.
>
> I don't reckon -1 could be the hop limit value.

-1 means un-initialized.

> IMHO, the value from
> case 1 (if socket is connected to some destination), otherwise case 2
> (if bound to a scope interface) or ultimately the default hop limit
> ought to be returned instead, as it will be most often correct, while
> the current behavior is always wrong, unless setsockopt() has been used
> first. I don't if some people may think doing a route lookup in
> getsockopt might be overly expensive, but at least the two other cases
> should be ok, particularly the last one.

The following patch seems to work for me, but this code has behaved this
way for a while, so don't know if it will break any existing apps.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[DCCP] ccid3: return value in ccid3_hc_rx_calc_first_li
Ian McDonald [Tue, 12 Dec 2006 02:47:59 +0000 (00:47 -0200)]
[DCCP] ccid3: return value in ccid3_hc_rx_calc_first_li

In a recent patch we introduced invalid return codes which will result in the
opposite of what is intended (i.e. send more packets in face of peculiar
network conditions).

This fixes it by returning ~0 which means not calculated as per
dccp_li_hist_calc_i_mean.

Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
17 years ago[NETFILTER]: {ip,ip6,arp}_tables: fix exponential worst-case search for loops
Al Viro [Tue, 12 Dec 2006 08:29:52 +0000 (00:29 -0800)]
[NETFILTER]: {ip,ip6,arp}_tables: fix exponential worst-case search for loops

If we come to node we'd already marked as seen and it's not a part of path
(i.e. we don't have a loop right there), we already know that it isn't a
part of any loop, so we don't need to revisit it.

That speeds the things up if some chain is refered to from several places
and kills O(exp(table size)) worst-case behaviour (without sleeping,
at that, so if you manage to self-LART that way, you are SOL for a long
time)...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER]: ip_tables: ipt and ipt_compat checks unification
Dmitry Mishin [Tue, 12 Dec 2006 08:29:26 +0000 (00:29 -0800)]
[NETFILTER]: ip_tables: ipt and ipt_compat checks unification

Matches and targets verification is duplicated in normal and compat processing
ways. This patch refactors code in order to remove this.

Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER]: x_tables: add missing try to load conntrack from match/targets
Yasuyuki Kozakai [Tue, 12 Dec 2006 08:29:02 +0000 (00:29 -0800)]
[NETFILTER]: x_tables: add missing try to load conntrack from match/targets

CLUSTERIP, CONNMARK, CONNSECMARK, and connbytes need ip_conntrack or
layer 3 protocol module of nf_conntrack.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER]: x_tables: error if ip_conntrack is asked to handle IPv6 packets
Yasuyuki Kozakai [Tue, 12 Dec 2006 08:28:40 +0000 (00:28 -0800)]
[NETFILTER]: x_tables: error if ip_conntrack is asked to handle IPv6 packets

To do that, this makes nf_ct_l3proto_try_module_{get,put} compatible
functions. As a result we can remove '#ifdef' surrounds and direct call of
need_conntrack().

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER]: nf_nat: fix NF_NAT dependency
Yasuyuki Kozakai [Tue, 12 Dec 2006 08:28:09 +0000 (00:28 -0800)]
[NETFILTER]: nf_nat: fix NF_NAT dependency

NF_NAT depends on NF_CONNTRACK_IPV4, not NF_CONNTRACK.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER]: Fix INET=n linking error
Patrick McHardy [Tue, 12 Dec 2006 08:27:46 +0000 (00:27 -0800)]
[NETFILTER]: Fix INET=n linking error

Building with INET=n results in

WARNING: "ip_route_output_key" [net/netfilter/nf_conntrack_h323.ko] undefined!

The entire code in net/netfilter is only used for IPv4/IPv6 currently, so
let it depend on INET.

Noticed by Toralf Förster <toralf.foerster@gmx.de>.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 13 Dec 2006 23:58:32 +0000 (15:58 -0800)]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4017/1: [Jornada7xx] - Updating Jornada720.c
  [ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support
  [ARM] Provide a method to alter the control register
  [ARM] 4016/1: prefetch macro is wrong wrt gcc's "delete-null-pointer-checks"
  [ARM] Remove empty fixup function
  [ARM] 4014/1: include drivers/hid/Kconfig
  [ARM] 4013/1: clocksource driver for netx
  [ARM] 4012/1: Clocksource for pxa
  [ARM] Clean up ioremap code
  [ARM] Unuse another Linux PTE bit
  [ARM] Clean up KERNEL_RAM_ADDR
  [ARM] Add sys_*at syscalls
  [ARM] 4004/1: S3C24XX: UDC remove implict addition of VA to regs
  [ARM] Formalise the ARMv6 processor name string
  [ARM] Handle HWCAP_VFP in VFP support code
  [ARM] 4011/1: AT91SAM9260: Fix compilation with NAND driver
  [ARM] 4010/1: AT91SAM9260-EK board: Prepare for MACB Ethernet support

17 years agoMerge branch 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl...
Linus Torvalds [Wed, 13 Dec 2006 23:57:58 +0000 (15:57 -0800)]
Merge branch 'release' of /home/ftp/linux/kernel/git/aegl/linux-2.6

* 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Move sg_dma_{len,address} from pci.h to scatterlist.h

17 years agoDriver core: deprecate PM_LEGACY, default it to N
David Brownell [Tue, 5 Dec 2006 11:07:38 +0000 (03:07 -0800)]
Driver core: deprecate PM_LEGACY, default it to N

Deprecate the old "legacy" PM API, and more importantly default it to "n".
Virtually nothing in-tree uses it any more.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDriver core: Make platform_device_add_data accept a const pointer
Scott Wood [Mon, 4 Dec 2006 22:57:19 +0000 (14:57 -0800)]
Driver core: Make platform_device_add_data accept a const pointer

platform_device_add_data() makes a copy of the data that is given to it,
and thus the parameter can be const.  This removes a warning when data
from get_property() on powerpc is handed to platform_device_add_data(),
as get_property() returns a const pointer.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDriver core: "platform_driver_probe() can save codespace": save codespace
Andrew Morton [Mon, 4 Dec 2006 22:56:36 +0000 (14:56 -0800)]
Driver core: "platform_driver_probe() can save codespace": save codespace

This function can be __init

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDebugFS : file/directory removal fix
Mathieu Desnoyers [Fri, 24 Nov 2006 18:51:14 +0000 (13:51 -0500)]
DebugFS : file/directory removal fix

Fix file and directory removal in debugfs. Add inotify support for file removal.

The following scenario :
create dir a
create dir a/b

cd a/b (some process goes in cwd a/b)

rmdir a/b
rmdir a

fails due to the fact that "a" appears to be non empty. It is because
the "b" dentry is not deleted from "a" and still in use. The same
problem happens if "b" is a file. d_delete is nice enough to know when
it needs to unhash and free the dentry if nothing else is using it or,
if someone is using it, to remove it from the hash queues and wait for
it to be deleted when it has no users.

The nice side-effect of this fix is that it calls the file removal
notification.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDebugFS : more file/directory creation error handling
Mathieu Desnoyers [Fri, 24 Nov 2006 18:50:09 +0000 (13:50 -0500)]
DebugFS : more file/directory creation error handling

Correct dentry count to handle creation errors.

This patch puts a dput at the file creation instead of the file removal :
lookup_one_len already returns a dentry with reference count of 1. Then,
the dget() in simple_mknod increments it when the dentry is associated
with a file. In a scenario where simple_create or simple_mkdir returns
an error, this would lead to an unwanted increment of the reference
counter, therefore making file removal impossible.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDebugFS : file/directory creation error handling
Mathieu Desnoyers [Fri, 24 Nov 2006 18:48:19 +0000 (13:48 -0500)]
DebugFS : file/directory creation error handling

Fix error handling of file and directory creation in DebugFS.

The error path should release the file system because no _remove will be called
for this erroneous creation.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDebugFS : coding style fixes
Mathieu Desnoyers [Fri, 24 Nov 2006 18:46:30 +0000 (13:46 -0500)]
DebugFS : coding style fixes

Minor coding style fixes along the way : 80 cols and a white space.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDebugFS : inotify create/mkdir support
Mathieu Desnoyers [Fri, 24 Nov 2006 18:45:37 +0000 (13:45 -0500)]
DebugFS : inotify create/mkdir support

Add inotify create and mkdir events to DebugFS.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agodriver core: delete virtual directory on class_unregister()
Akinobu Mita [Mon, 20 Nov 2006 19:53:18 +0000 (04:53 +0900)]
driver core: delete virtual directory on class_unregister()

Class virtual directory is created as the need arises.
But it is not deleted when the class is unregistered.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDriver core: show "initstate" of module
Kay Sievers [Fri, 24 Nov 2006 11:15:25 +0000 (12:15 +0100)]
Driver core: show "initstate" of module

Show the initialization state(live, coming, going) of the module:
  $ cat /sys/module/usbcore/initstate
  live

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>