openwrt/staging/blogic.git
16 years agotipc: Optimization to multicast name lookup algorithm
Allan Stephens [Tue, 15 Jul 2008 05:45:33 +0000 (22:45 -0700)]
tipc: Optimization to multicast name lookup algorithm

This patch simplifies and speeds up TIPC's algorithm for identifying
on-node and off-node destinations that overlap a multicast name
sequence range.  Rather than traversing the list of all known name
publications within the cluster, it now traverses the (potentially
much shorter) list of name publications made by the node itself, and
determines if any off-node destinations exist by comparing the sizes
of the two lists.  (Since the node list must be a subset of the
cluster list, a difference in sizes means that at least one off-node
destination must exist.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotipc: Add missing locks when inspecting node list & link list
Allan Stephens [Tue, 15 Jul 2008 05:44:58 +0000 (22:44 -0700)]
tipc: Add missing locks when inspecting node list & link list

This patch ensures that TIPC configuration commands that display info
about neighboring nodes and their links take the spinlocks that
protect the node list and link lists from changing while the lists
are being traversed.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotipc: Fix bug in scope checking for multicast messages
Allan Stephens [Tue, 15 Jul 2008 05:44:32 +0000 (22:44 -0700)]
tipc: Fix bug in scope checking for multicast messages

This patch ensures that TIPC's multicast message name lookup
algorithm does individualized scope checking for each published
name it examines.  Previously, scope checking was only done for
the first name in a name table publication list, which could
result in incoming multicast messages being delivered to ports
publishing names with "node" scope, or not being delivered to
ports publishing names with "cluster" or "zone" scope.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotipc: Eliminate improper use of TIPC_OK error code
Allan Stephens [Tue, 15 Jul 2008 05:44:01 +0000 (22:44 -0700)]
tipc: Eliminate improper use of TIPC_OK error code

This patch corrects many places where TIPC routines indicated
successful completion by returning TIPC_OK instead of 0.
(The TIPC_OK symbol has the value 0, but it should only be used
in contexts that deal with the error code field of a TIPC
message header.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotipc: Fix race condition that could cause accept() to fail
Allan Stephens [Tue, 15 Jul 2008 05:43:32 +0000 (22:43 -0700)]
tipc: Fix race condition that could cause accept() to fail

This patch ensurs that accept() returns successfully even when
the newly created socket is immediately disconnected by its peer.
Previously, accept() would fail if it was unable to pass back
the optional address info for the socket's peer before the
socket became disconnected; TIPC now allows accept() to gather
peer address information after disconnection.  As a bonus, the
revised code accesses the socket's port more efficiently, without
the overhead incurred by a reference table lookup.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotipc: Optimize pointer dereferencing when receiving stream data
Allan Stephens [Tue, 15 Jul 2008 05:42:51 +0000 (22:42 -0700)]
tipc: Optimize pointer dereferencing when receiving stream data

This patch eliminates an unnecessary pointer dereference when
accessing a stream-based socket's receive queue.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotipc: Remove unneeded parameter to tipc_createport_raw()
Allan Stephens [Tue, 15 Jul 2008 05:42:19 +0000 (22:42 -0700)]
tipc: Remove unneeded parameter to tipc_createport_raw()

This patch eliminates an unneeded parameter when creating a low-level
TIPC port object.  Instead of returning both the pointer to the port
structure and the port's reference ID, it now returns only the pointer
since the port structure contains the reference ID as one of its fields.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2: Update version to 1.7.8.
Michael Chan [Tue, 15 Jul 2008 05:40:21 +0000 (22:40 -0700)]
bnx2: Update version to 1.7.8.

Signed-off-by: Michael Chan <mchan@braodcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2: Support secondary MAC addresses.
Benjamin Li [Tue, 15 Jul 2008 05:39:52 +0000 (22:39 -0700)]
bnx2: Support secondary MAC addresses.

Add support for configuring secondary unicast addresses.  There
are 4 additional perfect match filters which can be used for
secondary unicast address support.

  *  Modified bnx2_set_mac_addr() to be more generic in handling
     the setting of the perfect match filters
  *  Changed bnx2_set_rx_mode() to handle the unicast dev_addr_list

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2: Allow flexible VLAN tag settings.
Michael Chan [Tue, 15 Jul 2008 05:39:03 +0000 (22:39 -0700)]
bnx2: Allow flexible VLAN tag settings.

Negotiate with boot code and ASF firmware to see if it can
support keeping VLAN tags in the RX packets.  If supported
by firmware, the VLAN tag will be kept in the RX packet
unless VLAN acceleration is registered.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2: Add ack parameter to bnx2_fw_sync().
Michael Chan [Tue, 15 Jul 2008 05:38:23 +0000 (22:38 -0700)]
bnx2: Add ack parameter to bnx2_fw_sync().

ack=1 means wait for firmware acknowledgement, and ack=0
means don't wait.  All current callers will set it to 1.

In the next patch, new calls will set ack=0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2: Add PCI ID for 5716.
Michael Chan [Tue, 15 Jul 2008 05:37:47 +0000 (22:37 -0700)]
bnx2: Add PCI ID for 5716.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <Benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2: Prevent ethtool -s from crashing when device is down.
Michael Chan [Tue, 15 Jul 2008 05:37:21 +0000 (22:37 -0700)]
bnx2: Prevent ethtool -s from crashing when device is down.

The device may be in D3-hot state and may crash if we try to
configure the speed settings by accessing the registers.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'davem-next' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
David S. Miller [Tue, 15 Jul 2008 05:30:17 +0000 (22:30 -0700)]
Merge branch 'davem-next' of /linux/kernel/git/jgarzik/netdev-2.6

16 years agonetlabel: return msg overflow error from netlbl_cipsov4_list faster
Denis V. Lunev [Tue, 15 Jul 2008 05:28:25 +0000 (22:28 -0700)]
netlabel: return msg overflow error from netlbl_cipsov4_list faster

Currently, we are trying to place the information from the kernel to
1, 2, 3 and 4 pages sequentially. These pages are allocated via slab.
Though, from the slab point of view steps 3 and 4 are equivalent on
most architectures. So, lets skip 3 pages attempt.

By the way, should we switch from .doit to .dumpit interface here?
The amount of data seems quite big for me.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agonet: Remove references to wan-router.txt in Kconfigs
Johann Felix Soden [Tue, 15 Jul 2008 05:22:29 +0000 (22:22 -0700)]
net: Remove references to wan-router.txt in Kconfigs

This patch removes references in drivers/net/wan/Kconfig and
net/wanrouter/Kconfig to Documentation/networking/wan-router.txt
which was removed in commit 99971e70fdc1862e120f3319fc0a4dba8c728acf
("[WANPIPE]: Forgotten bits of Sangoma drivers removal.").

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotun: Fix/rewrite packet filtering logic
Max Krasnyansky [Tue, 15 Jul 2008 05:18:19 +0000 (22:18 -0700)]
tun: Fix/rewrite packet filtering logic

Please see the following thread to get some context on this
http://marc.info/?l=linux-netdev&m=121564433018903&w=2

Basically the issue is that current multi-cast filtering stuff in
the TUN/TAP driver is seriously broken.
Original patch went in without proper review and ACK. It was broken and
confusing to start with and subsequent patches broke it completely.
To give you an idea of what's broken here are some of the issues:

- Very confusing comments throughout the code that imply that the
character device is a network interface in its own right, and that packets
are passed between the two nics. Which is completely wrong.

- Wrong set of ioctls is used for setting up filters. They look like
shortcuts for manipulating state of the tun/tap network interface but
in reality manipulate the state of the TX filter.

- ioctls that were originally used for setting address of the the TX filter
got "fixed" and now set the address of the network interface itself. Which
made filter totaly useless.

- Filtering is done too late. Instead of filtering early on, to avoid
unnecessary wakeups, filtering is done in the read() call.

The list goes on and on :)

So the patch cleans all that up. It introduces simple and clean interface for
setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering
before enqueuing the packets.

TX filtering is useful in the scenarios where TAP is part of a bridge, in
which case it gets all broadcast, multicast and potentially other packets when
the bridge is learning. So for example Ethernet tunnelling app may want to
setup TX filters to avoid tunnelling multicast traffic. QEMU and other
hypervisors can push RX filtering that is currently done in the guest into the
host context therefore saving wakeups and unnecessary data transfer.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago8021q: Check return of dev_set_promiscuity/allmulti
Wang Chen [Tue, 15 Jul 2008 03:59:03 +0000 (20:59 -0700)]
8021q: Check return of dev_set_promiscuity/allmulti

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check all positive increment for promiscuity and allmulti
to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agomacvlan: Check return of dev_set_allmulti
Wang Chen [Tue, 15 Jul 2008 03:57:07 +0000 (20:57 -0700)]
macvlan: Check return of dev_set_allmulti

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipv4: Fix ipmr unregister device oops
Wang Chen [Tue, 15 Jul 2008 03:56:34 +0000 (20:56 -0700)]
ipv4: Fix ipmr unregister device oops

An oops happens during device unregister.

The following oops happened when I add two tunnels, which
use a same device, and then delete one tunnel.
Obviously deleting tunnel "A" causes device unregister, which
send a notification, and after receiving notification, ipmr do
unregister again for tunnel "B" which also use same device.
That is wrong.
After receiving notification, ipmr only needs to decrease reference
count and don't do duplicated unregister.
Fortunately, IPv6 side doesn't add tunnel in ip6mr, so it's clean.

This patch fixs:
- unregister device oops
- using after dev_put()

Here is the oops:
===
Jul 11 15:39:29 wangchen kernel: ------------[ cut here ]------------
Jul 11 15:39:29 wangchen kernel: kernel BUG at net/core/dev.c:3651!
Jul 11 15:39:29 wangchen kernel: invalid opcode: 0000 [#1]
Jul 11 15:39:29 wangchen kernel: Modules linked in: ipip tunnel4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipv6 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet binfmt_misc button battery ac loop dm_mod usbhid ff_memless pcmcia firmware_class ohci1394 8139too mii ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ide_cd_mod cdrom snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm i2c_i801 snd_timer snd i2c_core soundcore snd_page_alloc rng_core shpchp ehci_hcd uhci_hcd pci_hotplug intel_agp agpgart usbcore ext3 jbd ata_piix ahci libata dock edd fan thermal processor thermal_sys piix sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table]
Jul 11 15:39:29 wangchen kernel:
Jul 11 15:39:29 wangchen kernel: Pid: 4102, comm: mroute Not tainted (2.6.26-rc9-default #69)
Jul 11 15:39:29 wangchen kernel: EIP: 0060:[<c024636b>] EFLAGS: 00010202 CPU: 0
Jul 11 15:39:29 wangchen kernel: EIP is at rollback_registered+0x61/0xe3
Jul 11 15:39:29 wangchen kernel: EAX: 00000001 EBX: ecba6000 ECX: 00000000 EDX: ffffffff
Jul 11 15:39:29 wangchen kernel: ESI: 00000001 EDI: ecba6000 EBP: c03de2e8 ESP: ed8e7c3c
Jul 11 15:39:29 wangchen kernel:  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Jul 11 15:39:29 wangchen kernel: Process mroute (pid: 4102, ti=ed8e6000 task=ed41e830 task.ti=ed8e6000)
Jul 11 15:39:29 wangchen kernel: Stack: ecba6000 c024641c 00000028 c0284e1a 00000001 c03de2e8 ecba6000 eecff360
Jul 11 15:39:29 wangchen kernel:        c0284e4c c03536f4 fffffff8 00000000 c029a819 ecba6000 00000006 ecba6000
Jul 11 15:39:29 wangchen kernel:        00000000 ecba6000 c03de2c0 c012841b ffffffff 00000000 c024639f ecba6000
Jul 11 15:39:29 wangchen kernel: Call Trace:
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0284e4c>] ipmr_device_event+0x1e/0x30
Jul 11 15:39:29 wangchen kernel:  [<c029a819>] notifier_call_chain+0x2a/0x47
Jul 11 15:39:29 wangchen kernel:  [<c012841b>] raw_notifier_call_chain+0x9/0xc
Jul 11 15:39:29 wangchen kernel:  [<c024639f>] rollback_registered+0x95/0xe3
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0285eee>] ip_mroute_setsockopt+0x47a/0x801
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c01727c4>] __find_get_block_slow+0xda/0xe4
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c0263501>] ip_setsockopt+0xa9/0x9ee
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea69287>] __ext3_get_inode_loc+0xcf/0x271 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<eea743c7>] __ext3_journal_dirty_metadata+0x13/0x32 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c0116434>] __wake_up+0xf/0x15
Jul 11 15:39:29 wangchen kernel:  [<eea5a424>] journal_stop+0x1bd/0x1c6 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea703a7>] __ext3_journal_stop+0x19/0x34 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c014291e>] get_page_from_freelist+0x94/0x369
Jul 11 15:39:29 wangchen kernel:  [<c01408f2>] filemap_fault+0x1ac/0x2fe
Jul 11 15:39:29 wangchen kernel:  [<c01a605e>] security_sk_alloc+0xd/0xf
Jul 11 15:39:29 wangchen kernel:  [<c023edea>] sk_prot_alloc+0x36/0x78
Jul 11 15:39:29 wangchen kernel:  [<c0240037>] sk_alloc+0x3a/0x40
Jul 11 15:39:29 wangchen kernel:  [<c0276062>] raw_hash_sk+0x46/0x4e
Jul 11 15:39:29 wangchen kernel:  [<c0166aff>] d_alloc+0x1b/0x157
Jul 11 15:39:29 wangchen kernel:  [<c023e4d1>] sock_common_setsockopt+0x12/0x16
Jul 11 15:39:29 wangchen kernel:  [<c023cb1e>] sys_setsockopt+0x6f/0x8e
Jul 11 15:39:29 wangchen kernel:  [<c023e105>] sys_socketcall+0x15c/0x19e
Jul 11 15:39:29 wangchen kernel:  [<c0103611>] sysenter_past_esp+0x6a/0x99
Jul 11 15:39:29 wangchen kernel:  [<c0290000>] unix_poll+0x69/0x78
Jul 11 15:39:29 wangchen kernel:  =======================
Jul 11 15:39:29 wangchen kernel: Code: 83 e0 01 00 00 85 c0 75 1f 53 53 68 12 81 31 c0 e8 3c 30 ed ff ba 3f 0e 00 00 b8 b9 7f 31 c0 83 c4 0c 5b e9 f5 26 ed ff 48 74 04 <0f> 0b eb fe 89 d8 e8 21 ff ff ff 89 d8 e8 62 ea ff ff c7 83 e0
Jul 11 15:39:29 wangchen kernel: EIP: [<c024636b>] rollback_registered+0x61/0xe3 SS:ESP 0068:ed8e7c3c
Jul 11 15:39:29 wangchen kernel: ---[ end trace c311acf85d169786 ]---
===

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipv4: Check return of dev_set_allmulti
Wang Chen [Tue, 15 Jul 2008 03:55:26 +0000 (20:55 -0700)]
ipv4: Check return of dev_set_allmulti

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

PS: For unwinding tunnel creating, we let ipip->ioctl() to handle it.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipv6: Fix using after dev_put()
Wang Chen [Tue, 15 Jul 2008 03:54:54 +0000 (20:54 -0700)]
ipv6: Fix using after dev_put()

Patrick McHardy pointed it out.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipv6: Check return of dev_set_allmulti
Wang Chen [Tue, 15 Jul 2008 03:54:23 +0000 (20:54 -0700)]
ipv6: Check return of dev_set_allmulti

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobridge: Check return of dev_set_promiscuity
Wang Chen [Tue, 15 Jul 2008 03:53:13 +0000 (20:53 -0700)]
bridge: Check return of dev_set_promiscuity

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for promiscuity to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobonding: Check return of dev_set_promiscuity/allmulti
Wang Chen [Tue, 15 Jul 2008 03:51:36 +0000 (20:51 -0700)]
bonding: Check return of dev_set_promiscuity/allmulti

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

In bond_alb and bond_main, we check all positive increment for promiscuity
and allmulti to get error return.
But there are still two problems left.
1. Some code path has no mechanism to signal errors upstream.
2. If there are multi slaves, it's hard to tell which slaves increment
   promisc/allmulti successfully and which failed.
So I left these problems to be FIXME.
Fortunately, the overflow is very rare case.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoaf_packet: Check return of dev_set_promiscuity/allmulti
Wang Chen [Tue, 15 Jul 2008 03:49:46 +0000 (20:49 -0700)]
af_packet: Check return of dev_set_promiscuity/allmulti

dev_set_promiscuity/allmulti might overflow.  Commit: "netdevice: Fix
promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

In af_packet, we check all positive increment for promiscuity and
allmulti to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Tue, 15 Jul 2008 03:40:34 +0000 (20:40 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6

16 years agonet-sched: cls_flow: add perturbation support
Patrick McHardy [Tue, 15 Jul 2008 03:36:32 +0000 (20:36 -0700)]
net-sched: cls_flow: add perturbation support

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6
David S. Miller [Tue, 15 Jul 2008 03:32:07 +0000 (20:32 -0700)]
Merge branch 'master' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6

16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Tue, 15 Jul 2008 03:23:54 +0000 (20:23 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:

net/netfilter/nf_conntrack_proto_tcp.c

16 years agonetfilter: Let nf_ct_kill() callers know if del_timer() returned true.
David S. Miller [Tue, 15 Jul 2008 03:22:38 +0000 (20:22 -0700)]
netfilter: Let nf_ct_kill() callers know if del_timer() returned true.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agort2x00: Reset LED assoc status after firmware update
Ivo van Doorn [Sun, 13 Jul 2008 08:07:48 +0000 (10:07 +0200)]
rt2x00: Reset LED assoc status after firmware update

According to the legacy drivers the LED association status
must be reset after the firmware has been uploaded to the
hardware.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: make index unsigned int for iwl_send_led_cmd
Abhijeet Kolekar [Fri, 11 Jul 2008 03:53:42 +0000 (11:53 +0800)]
iwlwifi: make index unsigned int for iwl_send_led_cmd

This is a small fix to change the idx type from int to unsigned.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: Fix LEDs for 3945
Abhijeet Kolekar [Fri, 11 Jul 2008 03:53:41 +0000 (11:53 +0800)]
iwlwifi: Fix LEDs for 3945

The patch fixes LEDs problem for 3945.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: send TXPOWER command after a new RXON command
Zhu Yi [Fri, 11 Jul 2008 03:53:40 +0000 (11:53 +0800)]
iwlwifi: send TXPOWER command after a new RXON command

The patch fixes the problem that TXPOWER command is not sent
after we issue a new RXON command which requires a tune. Otherwise
we won't be able to Tx any frames.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: enable active scanning
Tomas Winkler [Fri, 11 Jul 2008 03:53:39 +0000 (11:53 +0800)]
iwlwifi: enable active scanning

This patch enables active scan on active channels.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: unify 4965 and 5000 scanning code
Tomas Winkler [Fri, 11 Jul 2008 03:53:38 +0000 (11:53 +0800)]
iwlwifi: unify 4965 and 5000 scanning code

This patch unifies 4965 and 5000 scanning code.

We increases the version number to 1.3.27. Since new uCode
iwlwifi-4965-2.ucode is required for 4965 cards.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: LED use correctly blink table
Tomas Winkler [Fri, 11 Jul 2008 03:53:37 +0000 (11:53 +0800)]
iwlwifi: LED use correctly blink table

This patch makes correct usage of the LED blink table.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: fix LED stall
Tomas Winkler [Fri, 11 Jul 2008 03:53:36 +0000 (11:53 +0800)]
iwlwifi: fix LED stall

This patch fixes LED stall. last_blink_time was updated only if LED command
was sent, causing wrong computation of the througput.
Some code cleanup comes with this patch as well

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: differentiate 4965 and 5000 hw ampdu queues number
Tomas Winkler [Fri, 11 Jul 2008 03:53:35 +0000 (11:53 +0800)]
iwlwifi: differentiate 4965 and 5000 hw ampdu queues number

This patch asks to allocate the correct amount of sw queues according
to hw ampdu queues number.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: make iwl4965_mac_conf_tx in atomic context
Emmanuel Grumbach [Fri, 11 Jul 2008 03:53:34 +0000 (11:53 +0800)]
iwlwifi: make iwl4965_mac_conf_tx in atomic context

This patch fixes iwl4965_mac_conf_tx. A mutex was taken in atomic context
leading to Oops. This patch removes the mutex and extends the hold
priv->lock. None of the field of QOS is accessed without priv->lock held.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: rs always set lq_sta->priv
Tomas Winkler [Fri, 11 Jul 2008 03:53:33 +0000 (11:53 +0800)]
iwlwifi: rs always set lq_sta->priv

This patch fixes printk NULL pointer exceptions in rs code.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Guy Cohen <guy.cohen@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: remove post associate work
Tomas Winkler [Fri, 11 Jul 2008 03:53:32 +0000 (11:53 +0800)]
iwlwifi: remove post associate work

This patch removes post associate work. It wasn't used.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: fixes RTS / CTS support
Emmanuel Grumbach [Fri, 11 Jul 2008 03:53:31 +0000 (11:53 +0800)]
iwlwifi: fixes RTS / CTS support

This patch fixes the RTS / CTS support in iwlwifi. 5000 will send CTS to
self when allowed by spec, 4965 will send RTS or CTS to self according to
mac80211 request.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi: adding pci device ids to iwl_hw_card_ids
Esti Kummer [Fri, 11 Jul 2008 03:53:30 +0000 (11:53 +0800)]
iwlwifi: adding pci device ids to iwl_hw_card_ids

The patch adds PCI device IDs to iwl_hw_card_ids.

Signed-off-by: Esti Kummer <stkumer@localhost.localdomain>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwl3965: remove useless network and duplicate checking
Adel Gadllah [Fri, 11 Jul 2008 03:53:29 +0000 (11:53 +0800)]
iwl3965: remove useless network and duplicate checking

mac802 can handle duplicate packages on its own, so let it do it.
The patch is based on patch from Johannes Berg for iwl4965.

Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: dont add a STA which is not in the same IBSS
Emmanuel Grumbach [Thu, 10 Jul 2008 14:54:14 +0000 (17:54 +0300)]
mac80211: dont add a STA which is not in the same IBSS

This patch avoids adding STAs that don't belong to our IBSS
ieee80211_bssid_match matches also bcast address so also APs
were added

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwif: remove compilation warnings iwl_add_radiotap
Tomas Winkler [Thu, 10 Jul 2008 11:28:42 +0000 (14:28 +0300)]
iwlwif: remove compilation warnings iwl_add_radiotap

Use directly put_unaligned_leX instead of put_unaligned(cpu_to_leX

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211 hwsim: fix endianness bug
Johannes Berg [Thu, 10 Jul 2008 09:56:33 +0000 (11:56 +0200)]
mac80211 hwsim: fix endianness bug

Radiotap is entirely little endian. Found with sparse.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: fix struct ieee80211_tx_queue_params
Johannes Berg [Thu, 10 Jul 2008 09:22:31 +0000 (11:22 +0200)]
mac80211: fix struct ieee80211_tx_queue_params

Multiple issues:
 - there are no "default" values needed
 - cw_min/cw_max can be larger than documented
 - restructure to decrease size
 - use get_unaligned_le16

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: fix TX sequence numbers
Johannes Berg [Thu, 10 Jul 2008 09:21:26 +0000 (11:21 +0200)]
mac80211: fix TX sequence numbers

This patch makes mac80211 assign proper sequence numbers to
QoS-data frames. It also removes the old sequence number code
because we noticed that only the driver or hardware can assign
sequence numbers to non-QoS-data and especially management
frames in a race-free manner because beacons aren't passed
through mac80211's TX path.

This patch also adds temporary code to the rt2x00 drivers to
not break them completely, that code will have to be reworked
for proper sequence numbers on beacons.

It also moves sequence number assignment down in the TX path
so no sequence numbers are assigned to frames that are dropped.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agowext: make sysfs bits optional and deprecate them
Johannes Berg [Thu, 10 Jul 2008 09:16:47 +0000 (11:16 +0200)]
wext: make sysfs bits optional and deprecate them

The /sys/class/net/*/wireless/ direcory is, as far as I know, not
used by anyone. Additionally, the same data is available via wext
ioctls. Hence the sysfs files are pretty much useless. This patch
makes them optional and schedules them for removal.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: fix RX sequence number check
Johannes Berg [Thu, 10 Jul 2008 08:11:02 +0000 (10:11 +0200)]
mac80211: fix RX sequence number check

According to 802.11-2007, we are doing the wrong thing in the
sequence number checks when receiving frames. This fixes it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: Fix ieee80211_rx_reorder_ampdu: ignore QoS null packets
Emmanuel Grumbach [Wed, 9 Jul 2008 21:47:19 +0000 (00:47 +0300)]
mac80211: Fix ieee80211_rx_reorder_ampdu: ignore QoS null packets

This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu.
This check has been broken by 'mac80211: rx.c use new helpers'.

Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in
RX.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agortl8187: use different ANAPARAM*_OFF values for 8187B
Herton Ronaldo Krzesinski [Thu, 10 Jul 2008 21:55:23 +0000 (18:55 -0300)]
rtl8187: use different ANAPARAM*_OFF values for 8187B

For RTL8187B it seems we need special values too for ANAPARAM*_OFF
values (and not use RTL8187 ones). The ANAPARAM*_OFF values used are the
stock ones read from the hardware after a cold boot.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agossb: Include dma-mapping.h
Michael Buesch [Wed, 9 Jul 2008 13:48:45 +0000 (15:48 +0200)]
ssb: Include dma-mapping.h

ssb.h implements DMA mapping functions, so it should
include dma-mapping.h. This fixes compile failures on certain architectures.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Reorganize beacon handling
Ivo van Doorn [Wed, 9 Jul 2008 13:12:44 +0000 (15:12 +0200)]
rt2x00: Reorganize beacon handling

With the new beacon handling from mac80211 we can
reorganize the beacon handling in rt2x00 as well.
This patch will move the function to the TX handlers,
and move all duplicate code into rt2x00queue.c.

After this change the descriptor helper functions
from rt2x00queue.c no longer need to be exported
outside of rt2x00lib and can be declared static.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Add support for CTS protection in rt2x00lib
Ivo van Doorn [Wed, 9 Jul 2008 13:12:06 +0000 (15:12 +0200)]
rt2x00: Add support for CTS protection in rt2x00lib

Inform drivers about the changed CTS protection settings.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: revamp beacon configuration
Johannes Berg [Wed, 9 Jul 2008 12:40:37 +0000 (14:40 +0200)]
mac80211: revamp beacon configuration

This patch changes mac80211's beacon configuration handling
to never pass skbs to the driver directly but rather always
require the driver to use ieee80211_beacon_get(). Additionally,
it introduces "change flags" on the config_interface() call
to enable drivers to figure out what is changing. Finally, it
removes the beacon_update() driver callback in favour of
having IBSS beacon delivered by ieee80211_beacon_get() as well.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: push interface checks down
Johannes Berg [Wed, 9 Jul 2008 12:40:36 +0000 (14:40 +0200)]
mac80211: push interface checks down

This patch pushes the "netif_running()" and "same type as before"
checks down into ieee80211_if_change_type() to centralise the
logic instead of duplicating it for cfg80211 and wext.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: revamp virtual interface handling
Johannes Berg [Wed, 9 Jul 2008 12:40:35 +0000 (14:40 +0200)]
mac80211: revamp virtual interface handling

This patch revamps the virtual interface handling and makes the
code much easier to follow. Fewer functions, better names, less
spaghetti code.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: make master netdev handling sane
Johannes Berg [Wed, 9 Jul 2008 12:40:34 +0000 (14:40 +0200)]
mac80211: make master netdev handling sane

Currently, almost every interface type has a 'bss' pointer
pointing to BSS information. This BSS information, however,
is for a _local_ BSS, not for the BSS we joined, so having
it on a STA mode interface makes little sense, but now they
have it pointing to the master device, which is an AP mode
virtual interface. However, except for some bitrate control
data, this pointer is only used in AP/VLAN modes (for power
saving stations.)

Overall, it is not necessary to even have the master netdev
be a valid virtual interface, and it doesn't have to be on
the list of interfaces either.

This patch changes the master netdev to be special, it now
 - no longer is on the list of virtual interfaces, which
   lets me remove a lot of tests for that
 - no longer has sub_if_data attached, since that isn't used

Additionally, this patch changes some vlan/ap mode handling
that is related to these 'bss' pointers described above (but
in the VLAN case they actually make sense because there they
point to the AP they belong to); it also adds some debugging
code to IEEE80211_DEV_TO_SUB_IF to validate it is not called
on the master netdev any more.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agortl8187: Fixed section mismatch in rtl8187_dev.c
Ihar Hrachyshka [Tue, 8 Jul 2008 22:11:59 +0000 (01:11 +0300)]
rtl8187: Fixed section mismatch in rtl8187_dev.c

When CONFIG_HOTPLUG=n the following error occures on vmlinux linkage:

`.exit.text' referenced in section `.data' of drivers/built-in.o:
defined in discarded section `.exit.text' of drivers/built-in.o

'rtl8187_disconnect' function marked as __devexit isn't compiled with no
hotplug support. Added __devexit_p macros to fix the problem.

Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Fix NULL pointer error in adhoc/master mode
Ivo van Doorn [Sat, 5 Jul 2008 13:11:57 +0000 (15:11 +0200)]
rt2x00: Fix NULL pointer error in adhoc/master mode

As soon as an interface is enabled, and that interface is in adhoc or master mode,
the device will start raising beacondone interrupts. But before the first interrupt is
raised, mac80211 will probably not have send any beacons to the device yet, which
results in a NULL pointer error when the skb is being freed.

Note that the "raise beacondone interrupts without a beacon" is also a bug,
and will be addressed later. The more important bug however is preventing
the NULL pointer failt itself, since there might be other conditions that could trigger
it as well.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: power management wext hooks
Samuel Ortiz [Fri, 4 Jul 2008 08:49:31 +0000 (10:49 +0200)]
mac80211: power management wext hooks

This patch implements the power management routines wireless extensions
for mac80211.
For now we only support switching PS mode between on and off.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agodccp ccid-3: Length of loss intervals
Gerrit Renker [Sun, 13 Jul 2008 10:51:40 +0000 (11:51 +0100)]
dccp ccid-3: Length of loss intervals

This corrects an error in the computation of the open loss interval I_0:
  * the interval length is (highest_seqno - start_seqno) + 1
  * and not (highest_seqno - start_seqno).

This condition was not fully clear in RFC 3448, but reflects the current
revision state of rfc3448bis and is also consistent with RFC 4340, 6.1.1.

Further changes:
----------------
 * variable renamed due to line length constraints;
 * explicit typecast to `s64' to avoid implicit signed/unsigned casting.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
16 years agodccp ccid-3: Fix a loss detection bug
Gerrit Renker [Sun, 13 Jul 2008 10:51:40 +0000 (11:51 +0100)]
dccp ccid-3: Fix a loss detection bug

This fixes a bug in the logic of the TFRC loss detection:
 * new_loss_indicated() should not be called while a loss is pending;
 * but the code allows this;
 * thus, for two subsequent gaps in the sequence space, when loss_count
   has not yet reached NDUPACK=3, the loss_count is falsely reduced to 1.

To avoid further and similar problems, all loss handling and loss detection is
now done inside tfrc_rx_hist_handle_loss(), using an appropriate routine to
track new losses.

Further changes:
----------------
 * added a reminder that no RX history operations should be performed when
   rx_handle_loss() has identified a (new) loss, since the function takes
   care of packet reordering during loss detection;
 * made tfrc_rx_hist_loss_pending() bool (thanks to an earlier suggestion
   by Arnaldo);
 * removed unused functions.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
16 years agodccp: Upgrade NDP count from 3 to 6 bytes
Gerrit Renker [Sun, 13 Jul 2008 10:51:40 +0000 (11:51 +0100)]
dccp: Upgrade NDP count from 3 to 6 bytes

RFC 4340, 7.7 specifies up to 6 bytes for the NDP Count option, whereas the code
is currently limited to up to 3 bytes. This seems to be a relict of an earlier
draft version and is brought up to date by the patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
16 years agodccp ccid-3: Fix error in loss detection
Gerrit Renker [Sun, 13 Jul 2008 10:51:40 +0000 (11:51 +0100)]
dccp ccid-3: Fix error in loss detection

The TFRC loss detection code used the wrong loss condition (RFC 4340, 7.7.1):
 * the difference between sequence numbers s1 and s2 instead of
 * the number of packets missing between s1 and s2 (one less than the distance).

Since this condition appears in many places of the code, it has been put into a
separate function, dccp_loss_free().

Further changes:
----------------
 * tidied up incorrect typing (it was using `int' for u64/s64 types);
 * optimised conditional statements for common case of non-reordered packets;
 * rewrote comments/documentation to match the changes.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
16 years agoARM: IXP4xx Ethernet NAPI fix
Krzysztof Halasa [Wed, 9 Jul 2008 11:10:32 +0000 (13:10 +0200)]
ARM: IXP4xx Ethernet NAPI fix

This patch removes some weirdness from IXP4xx Ethernet driver.

Signed-off-by: Krzysztof HaƂasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoSAA9730: Remove driver
Ralf Baechle [Wed, 9 Jul 2008 11:38:43 +0000 (12:38 +0100)]
SAA9730: Remove driver

The only user of the board, the extremly dated and rare MIPS Atlas board,
has been removed, so this driver can go, too.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoFix missing exports for net/phy/mdio-bitbang.c
Takashi Iwai [Mon, 7 Jul 2008 14:51:45 +0000 (16:51 +0200)]
Fix missing exports for net/phy/mdio-bitbang.c

{alloc,free}_mdio_bitbang() are not exported while they are used in
mdio-ofgpio driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agocxgb3 - Add iscsi support
Karen Xie [Tue, 8 Jul 2008 16:32:34 +0000 (09:32 -0700)]
cxgb3 - Add iscsi support

Add iSCSI (S3xx) support.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agovirtio_net: Set VIRTIO_NET_F_GUEST_CSUM feature
Mark McLoughlin [Tue, 8 Jul 2008 07:10:42 +0000 (17:10 +1000)]
virtio_net: Set VIRTIO_NET_F_GUEST_CSUM feature

We can handle receiving partial csums, so set the
appropriate feature bit.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: Improve multiqueue AIM support
Alexander Duyck [Tue, 8 Jul 2008 22:14:44 +0000 (15:14 -0700)]
igb: Improve multiqueue AIM support

Improve multiqueue performance
Change itr_val to reflect ITR timer value instead of ints/sec
Cleaned up AIM algorithms in general

Based on work by Mitch Williams

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: unused variable warning in igb remove
Alexander Duyck [Tue, 8 Jul 2008 22:14:04 +0000 (15:14 -0700)]
igb: unused variable warning in igb remove

Wrap hw variable declaration in DCA flags to prevent unused variable
warning during compilation.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: update suspend resume
Alexander Duyck [Tue, 8 Jul 2008 22:13:38 +0000 (15:13 -0700)]
igb: update suspend resume

Updates the suspend and resume to better handle the possibility of MSIX
vector changes.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agonet: add netif_napi_del function to allow for removal of napistructs
Alexander Duyck [Tue, 8 Jul 2008 22:13:05 +0000 (15:13 -0700)]
net: add netif_napi_del function to allow for removal of napistructs

Adds netif_napi_del function which is used to remove the napi struct from
the netdev napi_list in cases where CONFIG_NETPOLL was enabled.
The motivation for adding this is to handle the case in which the number of
queues on a device changes due to a configuration change.  Previously the
napi structs for each queue would be left in the list until the netdev was
freed.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: add support for in kernel LRO
Alexander Duyck [Tue, 8 Jul 2008 22:12:13 +0000 (15:12 -0700)]
igb: add support for in kernel LRO

This patch adds support for the use of the inet_lro module to provide
software LRO support.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: add page recycling support
Alexander Duyck [Tue, 8 Jul 2008 22:11:40 +0000 (15:11 -0700)]
igb: add page recycling support

This patch adds support for page recycling by splitting the page into two
usable portions and tracking the reference count.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: Add support for quad port WOL and feature flags
Alexander Duyck [Tue, 8 Jul 2008 22:10:46 +0000 (15:10 -0700)]
igb: Add support for quad port WOL and feature flags

Change igb from using a series of boolean operators to using a single flags
value that contains a number of different bit flags for all the different
features of the adapter.

This patch also adds WOL support for quad port adapters.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: add 82576 MAC support
Alexander Duyck [Tue, 8 Jul 2008 22:10:12 +0000 (15:10 -0700)]
igb: add 82576 MAC support

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: Increment driver version
Auke Kok [Tue, 8 Jul 2008 22:09:37 +0000 (15:09 -0700)]
igb: Increment driver version

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: reenable CRC stripping in hardware
Auke Kok [Tue, 8 Jul 2008 22:08:29 +0000 (15:08 -0700)]
igb: reenable CRC stripping in hardware

We can remove a clunky workaround for not having the hardware
strip the CRC. 82575 silicon as well as the older PCI Express
e1000e hardware all work OK in this respect.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: add DCA support
Jeb Cramer [Tue, 8 Jul 2008 22:07:55 +0000 (15:07 -0700)]
igb: add DCA support

Add DCA support in the similar method that it was added to the ixgbe
driver recently. DCA allows the network device to put data in the
CPU cache and notify the chipset of that event. This reduces cache
misses during receives.

Signed-off-by: Jeb Cramer <cramerj@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: update ethtool stats to support multiqueue
Alexander Duyck [Tue, 8 Jul 2008 22:07:24 +0000 (15:07 -0700)]
igb: update ethtool stats to support multiqueue

Addesses problems seen earlier with igb driver not correctly reporting rx
and tx stats.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoigb: Introduce multiple TX queues with infrastructure
Peter P Waskiewicz Jr [Tue, 8 Jul 2008 22:06:51 +0000 (15:06 -0700)]
igb: Introduce multiple TX queues with infrastructure

This code adds multiple Tx queue infrastructure much like we
previously did in ixgbe. The MSI-X vector mapping is the bulk of
the change.

IAM can now be safely enabled and we've verified that it does
work correctly. We can also eliminate the tx ring lock.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: update copyright dates and versions
Jesse Brandeburg [Tue, 8 Jul 2008 22:53:09 +0000 (15:53 -0700)]
ixgb: update copyright dates and versions

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: make NAPI the only option and the default
Jesse Brandeburg [Tue, 8 Jul 2008 22:53:04 +0000 (15:53 -0700)]
ixgb: make NAPI the only option and the default

network maintainers suggest NAPI only drivers are the only way to go.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: cleanup header
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:58 +0000 (15:52 -0700)]
ixgb: cleanup header

cleaned up some spacing in defines

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: audit use of dev_kfree_skb_any
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:53 +0000 (15:52 -0700)]
ixgb: audit use of dev_kfree_skb_any

calls to kfree_skb_any are only required when calling kfree
from interrupt context.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: clean up assignments inside if statements
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:48 +0000 (15:52 -0700)]
ixgb: clean up assignments inside if statements

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: rx cleanup performance improvements
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:43 +0000 (15:52 -0700)]
ixgb: rx cleanup performance improvements

rx cleanup should look more like our other drivers that have evolved
to nicer performance levels over time.  Changes consist of refilling
tx buffers to hardware more often, some minor assignment cleanups.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: cleanup checkpatch suggestions that are relevant
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:38 +0000 (15:52 -0700)]
ixgb: cleanup checkpatch suggestions that are relevant

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: trivial fix space after for
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:33 +0000 (15:52 -0700)]
ixgb: trivial fix space after for

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: fix spelling errors
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:28 +0000 (15:52 -0700)]
ixgb: fix spelling errors

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: whitespace fixups
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:23 +0000 (15:52 -0700)]
ixgb: whitespace fixups

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: cleanup space after while
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:18 +0000 (15:52 -0700)]
ixgb: cleanup space after while

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: format all if( to be if (
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:13 +0000 (15:52 -0700)]
ixgb: format all if( to be if (

this patch is trivial but because I want to have everything be nice and
tidy I'm updating it.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoixgb: clean up un-necessary declarations
Jesse Brandeburg [Tue, 8 Jul 2008 22:52:08 +0000 (15:52 -0700)]
ixgb: clean up un-necessary declarations

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>