Daniel Golle [Sat, 10 Sep 2022 17:21:39 +0000 (18:21 +0100)]
kernel: fix Aquantia AQtion Atlantic module dependencies
The buildbot revealed that
Package kmod-atlantic is missing dependencies for the following libraries:
hwmon.ko
macsec.ko
make[2]: *** [modules/netdevices.mk:1474: /builder/shared-workdir/build/bin/targets/mediatek/mt7629/packages/kmod-atlantic_5.15.67-1_arm_cortex-a7.ipk] Error 1
make[2]: Leaving directory '/builder/shared-workdir/build/package/kernel/linux'
time: package/kernel/linux/compile#43.51#17.03#415.37
ERROR: package/kernel/linux failed to build.
make[1]: *** [package/Makefile:116: package/kernel/linux/compile] Error 1
make[1]: *** Waiting for unfinished jobs....
Add those missing dependencies to fix the build.
Fixes: d02e887d7c ("kernel: add Aquantia AQtion Atlantic 10Gbps Ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Sat, 3 Sep 2022 12:31:29 +0000 (14:31 +0200)]
base-files: support "metric" in board.json
It allows prepopulating /etc/config/network interface-s with predefined
metric. It may be useful for devices with multiple WAN ports.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rosen Penev [Sat, 20 Aug 2022 21:12:32 +0000 (14:12 -0700)]
Makefile: replace head call with grep's -m
head is not necessary here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Mehdi Ahmadi [Fri, 26 Aug 2022 21:56:45 +0000 (23:56 +0200)]
kernel: add Aquantia AQtion Atlantic 10Gbps Ethernet
Driver support for Aquantia AQtion Atlantic 10Gbps Ethernet NIC
with the AQC107, AQC108 and others chipsets found on:
- TP-Link: TX401
- Asus: XG-C100C, ROG Areion 10G NIC
- & more ...
Successfully tested using a build with 22.03.0-rc6
(x86_64/EFI image) and the following outputs:
```
[ 3.092053] pci 0000:06:00.0: [1d6a:07b1] type 00 class 0x020000
[ 3.094983] pci 0000:06:00.0: reg 0x10: [mem 0x50800000-0x5080ffff 64bit]
[ 3.098880] pci 0000:06:00.0: reg 0x18: [mem 0x50810000-0x50810fff 64bit]
[ 3.108868] pci 0000:06:00.0: reg 0x20: [mem 0x50400000-0x507fffff 64bit]
[ 3.108883] pci 0000:06:00.0: enabling Extended Tags
[ 3.118874] pci 0000:06:00.0: supports D1 D2
[ 3.118874] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.128891] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:1d.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 10.312793] atlantic 0000:06:00.0: enabling device (0000 -> 0002)
[ 23.223813] atlantic 0000:06:00.0 eth0: atlantic: link change old 0 new 10000
lsmod && uname -ar ;
# atlantic 147456 0
# # // ...
# Linux version 5.10.138 (vagrant@make-host) (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20430-
18a2b29aa1) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Aug 29 09:54:00 2022
```
Signed-off-by: Mehdi Ahmadi <aphorise@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
[ fix wrong commit author as requested by author itself ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Josh Roys [Sat, 23 Jul 2022 15:23:16 +0000 (11:23 -0400)]
scripts: always check certificates
Remove flags from wget and curl instructing them to ignore bad server
certificates. Although other mechanisms can protect against malicious
modifications of downloads, other vectors of attack may be available
to an adversary.
TLS certificate verification can be disabled by turning oof the
"Enable TLS certificate verification during package download" option
enabled by default in the "Global build settings" in "make menuconfig"
Signed-off-by: Josh Roys <roysjosh@gmail.com>
[ add additional info on how to disable this option ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Fri, 9 Sep 2022 19:09:30 +0000 (21:09 +0200)]
CI: kernel: Cache external toolchain
Cache external toolchain for each target to remove load from openwrt cdn
server and make the external toolchain setup quicker.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Golle [Sat, 10 Sep 2022 02:22:17 +0000 (03:22 +0100)]
mediatek: bananapi-r3: remove kmod-btmtkuart from default packages
The package kmod-btmtkuart is specific for MT7622 and isn't available
for MT7986 (which doesn't have this built-in Bluetooth like MT7622).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 10 Sep 2022 00:24:08 +0000 (01:24 +0100)]
kernel: fix build on bcm27xx target platform
The bump to Linux 5.15.67 brought some changes in the VC4 display
driver which we had also patched downstream. Fix our local patches to
fix the build.
Fixes: fbe2f7db86 ("kernel: bump 5.15 to 5.15.67")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Fri, 9 Sep 2022 21:35:49 +0000 (23:35 +0200)]
rockchip: add system-LED aliases specific to OpenWrt
Add the aliases sections required to detect LEDs specific to OpenWrt
boot / update indication for the NanoPi R4S.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Fri, 9 Sep 2022 23:01:57 +0000 (01:01 +0200)]
rockchip: ensure NanoPi R4S has unique MAC address
Ensure the MAC address for all NanoPi R4S boards is assigned unique for
each board.
FriendlyElec ship two versions of the R4S: The standard as well as the
enterprise edition with only the enterprise edition including the EEPROM
chip that stores the unique MAC address.
In order to assign both board types unique MAC addresses, fall back on
the same method used for the NanoPi R2S in case the EEPROM chip is not
present by generating the board MAC from the SD card CID.
[0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R4S#Differences_Between_R4S_Standard_Version_.26_R4S_Enterprise_Version
Signed-off-by: David Bauer <mail@david-bauer.net>
Bjørn Mork [Fri, 9 Sep 2022 06:28:13 +0000 (08:28 +0200)]
realtek: fix RTL839x receive tag decoding
The previous fixup was incomplete, and the offsets for the
queue and crc_error cpu_tag bitfields were still wrong on
RTL839x.
Fixes: 545c6113c93b ("realtek: fix RTL838x receive tag decoding")
Suggested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Daniel Golle [Fri, 9 Sep 2022 19:29:10 +0000 (20:29 +0100)]
linux-firmware: package MediaTek MT792[12] Bluetooth firmware
btusb fails to start on MT792[12] hardware without the appropriate
firmware being loaded first:
[ 9.750285] bluetooth hci0: Direct firmware load for mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin failed with error -2
[ 9.765723] bluetooth hci0: Falling back to sysfs fallback for: mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin
Package firmware for MediaTek MT792[12] Bluetooth from linux-firmware.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 9 Sep 2022 19:27:17 +0000 (20:27 +0100)]
kernel: modules: bluetooth: include support for MediaTek USB
Enable MediaTek protocol in btusb module to support e.g. the Bluetooth
part of the MT7921K NGFF/M.2 module.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 9 Sep 2022 19:46:33 +0000 (20:46 +0100)]
kernel: backport MediaTek USB Bluetooth additions
Backport commits from linux.git adding support for various MT7921
Bluetooth USB IDs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 8 Sep 2022 20:14:32 +0000 (21:14 +0100)]
mediatek: rename some patches
To ease maintainance rename patches to contain the kernel version they
have first been part of.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Chukun Pan [Tue, 6 Sep 2022 15:15:39 +0000 (23:15 +0800)]
mediatek: 5.15: add missing patch suffix
The 213 patch is missing filename suffix. Fix it.
Fixes: dabcaac ("mediatek: add mt7986 soc support to the target")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Mon, 5 Sep 2022 15:16:09 +0000 (23:16 +0800)]
mediatek: mt7986a/b-rfb: fix 02_network setup
According to the device tree, the lan ports are
lan0 to lan3, and the wan port is eth1.
Fixes: cffc77a ("mediatek: add filogic subtarget")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
John Audia [Thu, 8 Sep 2022 13:03:12 +0000 (09:03 -0400)]
kernel: bump 5.15 to 5.15.67
All patches automatically rebased
Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Tue, 6 Sep 2022 21:34:02 +0000 (17:34 -0400)]
kernel: add # CONFIG_ARM64_ERRATUM_2441009 symbol
No current targets are ARMv9 or Cortex-A510 so comment the new symbol.[1]
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/arm64/Kconfig?id=v5.15.65&id2=v5.15.64
Signed-off-by: John Audia <therealgraysky@proton.me>
David Bauer [Fri, 9 Sep 2022 16:14:08 +0000 (18:14 +0200)]
ipq40xx: add LTE packages for GL-AP1300
Add LTE packages required for operating the LTE modem optionally shipped
with the GL-AP1300.
Signed-off-by: David Bauer <mail@david-bauer.net>
Nick Hainke [Wed, 20 Jul 2022 18:39:09 +0000 (20:39 +0200)]
ipq40xx: switch to 5.15 as default kernel
The testing kernel received now multiple months of testing. Set 5.15 as
default to give it a test with a broader audience.
Tested on:
- MikroTik SXTsq 5 AC
- FritzBox 4040/7530
- ZyXEL NBG6617
Signed-off-by: Nick Hainke <vincent@systemli.org>
Daniel Golle [Fri, 9 Sep 2022 04:01:47 +0000 (05:01 +0100)]
kernel: mt7530: add support for in-band managed link
Add support for in-band managed link status to support SFP cage
connected to port 5 of the MT7531 switch on the Bananapi BPi-R3.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 9 Sep 2022 04:00:57 +0000 (05:00 +0100)]
kernel: mtk_sgmii: re-organize PCS link status reporting
Don't report speed in case link is down.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Bjørn Mork [Thu, 8 Sep 2022 17:35:34 +0000 (19:35 +0200)]
realtek: fix RTL838x receive tag decoding
Commit
dc9cc0d3e2a1 ("realtek: add QoS and rate control") replaced a
16 bit reserved field in the RTL83xx packet header with the initial
cpu_tag word, shifting the real cpu_tag fields by one. Adjusting for
this new shift was partially forgotten in the new RX tag decoders.
This caused the switch to block IGMP, effectively blocking IPv4
multicast.
The bug was partially fixed by commit
9d847244d9fd ("realtek: fix
RTL839X receive tag decoding")
Fix on RTL838x too, including correct NIC_RX_REASON_SPECIAL_TRAP value.
Suggested-by: Jan Hoffmann <jan@3e8.eu>
Fixes: dc9cc0d3e2a1 ("realtek: add QoS and rate control")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Daniel Golle [Thu, 8 Sep 2022 18:29:44 +0000 (19:29 +0100)]
mediatek: fix typo in bpi-r64 image recipe
Janusz Dziedzic reported a typo introduced by a recent commit. Fix it.
Fixes: 50c892d67b ("mediatek: bpi-r64: make initramfs/recovery optional")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Mon, 5 Sep 2022 17:23:16 +0000 (19:23 +0200)]
ath79: add support for ZTE MF281
Add support for the ZTE MF281 battery-powered WiFi router.
Hardware
--------
SoC: Qualcomm Atheros QCA9563
RAM: 128M DDR2
FLASH: 2M SPI-NOR (GigaDevice GD25Q16)
128M SPI-NAND (GigaDevice)
WLAN: QCA9563 2T2R 802.11 abgn
QCA9886 2T2R 802.11 nac
WWAN: ASRMicro ASR1826
ETH: Qualcomm Atheros QCA8337
UART: 115200 8n1
Unpopulated connector next to SIM slot
(SIM) GND - RX - TX - 3V3
Don't connect 3V3
BUTTON: Reset - WPS
LED: 1x debug-LED (internal)
LEDs on front of the device are controlled
using the modem CPU and can not be controlled
by OpenWrt
Installation
------------
1. Connect to the serial console. Power up the device and interrupt
autoboot when prompted
2. Connect a TFTP server reachable at 192.168.1.66 to the ethernet port.
Serve the OpenWrt initramfs image as "speedbox-2.bin"
3. Boot the initramfs image using U-Boot
$ setenv serverip 192.168.1.66
$ setenv ipaddr 192.168.1.154
$ tftpboot 0x84000000 speedbox-2.bin
$ bootm
4. Copy the OpenWrt factory image to the device using scp and write to
the NAND flash
$ mtd write /path/to/openwrt/factory.bin firmware
WWAN
----
The WWAN card can be used with OpenWrt. Example configuration for
connection with a unauthenticated dual-stack APN:
network.lte=interface
network.lte.proto='ncm'
network.lte.device='/dev/ttyACM0'
network.lte.pdptype='IPV4V6'
network.lte.apn='internet.telekom'
network.lte.ipv6='auto'
network.lte.delay='10'
The WWAN card is running a modified version of OpenWrt and handles
power-management as well as the LED controller (AW9523). A root shell
can be acquired by installing adb using opkg and executing "adb shell".
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Thu, 8 Sep 2022 01:44:30 +0000 (02:44 +0100)]
mediatek: bpi-r64: make initramfs/recovery optional
Only include recovery image in SD card image generated for the
BananaPi BPi-R64 if building with CONFIG_TARGET_ROOTFS_INITRAMFS
This allows to build images larger than 32 MB (the limit for
initramfs/recovery image) by deselecting initramfs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 8 Sep 2022 01:34:28 +0000 (02:34 +0100)]
mediatek: bpi-r3: make initramfs/recovery optional
Only include recovery image in SD card image generated for the
BananaPi BPi-R3 if building with CONFIG_TARGET_ROOTFS_INITRAMFS.
This allows to build images larger than 32 MB (the limit for
initramfs/recovery image) by deselecting initramfs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tomasz Maciej Nowak [Tue, 6 Sep 2022 13:32:34 +0000 (15:32 +0200)]
ipq-wifi: add Pakedge WR-1 support
Calibration variants:
Pakedge-WR-1 ETSI, FCC and IC-2.4GHz
Pakedge-WR-1-ACMA ACMA
Pakedge-WR-1-IC IC-5GHz
Pakedge-WR-1-SRRC SRRC
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tomasz Maciej Nowak [Tue, 6 Sep 2022 13:32:33 +0000 (15:32 +0200)]
ipq40xx: add support for Pakedge WR-1
Pakedge WR-1 is a dual-band wireless router.
Specification
SoC: Qualcomm Atheros IPQ4018
RAM: 256 MB DDR3
Flash: 32 MB SPI NOR
WIFI: 2.4 GHz 2T2R integrated
5 GHz 2T2R integrated
Ethernet: 5x 10/100/1000 Mbps QCA8075
USB: 1x 2.0
LEDS: 8x (3 GPIO controlled, 5 connected to switch)
Buttons: 1x GPIO controlled
UART: pin header J5
1. 3.3V, 2. GND, 3. TX, 4. RX
baud: 115200, parity: none, flow control: none
Installation
1. Rename initramfs image to:
openwrt-ipq806x-qcom-ipq40xx-ap.dk01.1-c1-fit-uImage-initramfs.itb
and copy it to USB flash drive with FAT32 file system.
2. Connect USB flash drive to the router and apply power while pressing
reset button. Hold the button, on the lates bootloader version, when
Power and WiFi-5 LEDs will start blinking release it. For the older
bootloader holding it for 15 seconds should suffice.
3. Now the router boots the initramfs image, at some point (close to one
minute) the Power LED will start blinking, when stops, router is fully
booted.
4. Connect to one of LAN ports and use SSH to open the shell at
192.168.1.1.
5. ATTENTION! now backup the mtd8 and mtd9 partitions, it's necessary if,
at some point, You want to go back to original firmware. The firmware
provided by manufacturer on its site is encrypted and U-Boot accepts
only decrypted factory images, so there's no way to restore original
firmware.
6. If the backup is prepared, transfer the sysupgrade image to the router
and use 'sysupgrade' command to flash it.
7. After successful flashing router will reboot. At some point the Power
LED will start blinking, wait till it stops, then router is ready for
configuration.
Additional information
U-Boot command line is password protected. Password is unknown.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tomasz Maciej Nowak [Mon, 29 Aug 2022 14:21:52 +0000 (16:21 +0200)]
kernel: load loop driver before creating overlay
Creating overlay will fail if there's no loop device.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tomasz Maciej Nowak [Mon, 29 Aug 2022 14:22:18 +0000 (16:22 +0200)]
kernel: load FAT filesystem drivers before mount_root
Devices using GPT usually have FAT filesystem on boot partition and
that's where the intermediary backup of system configuration is stored
on sysupgrade. Automatic restoring of OpenWrt configuration after
sysupgrade will be inhibited if the driver is not loaded and file system
type is not specified in mount command.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Daniel Golle [Wed, 7 Sep 2022 03:46:31 +0000 (04:46 +0100)]
Revert "tools/meson: update to 0.63.1"
This reverts commit
da95084d3478226bede2aed04e21f47525b7e0ad.
It was pulled by accident.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 7 Sep 2022 03:23:22 +0000 (04:23 +0100)]
mediatek: remove redundant patch
The patch 921-mt7986-add-mmc-support.patch introduced by commit
dabcaac443 ("mediatek: add mt7986 soc support to the target") has never
been applied in a way that it would have any effect as it actually
created a file target/linux/generic/patches-5.15/... in the kernel tree
and was probably a patch intended to be applied to openwrt.git instead
of being put into kernel patches folder as a file.
As an upstream commit from vanilla Linux also adding support for MT7986
to the mtk-sd driver has already been included we can remove that old
patch.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 6 Sep 2022 20:16:06 +0000 (21:16 +0100)]
arm-trusted-firmware-tools: update to v2.7
Update host build of fiptool and use the new python sptool.py instead
of the previous sptool executable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Mon, 29 Aug 2022 11:35:06 +0000 (13:35 +0200)]
tools/llvm: update to 14.0.6
Update to latest version.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 06:17:58 +0000 (08:17 +0200)]
libunwind: update to 1.6.2
Remove upstreamed:
- 001-Don-t-force-exec_prefix-lib64-libdir-on-ppc64.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 06:03:08 +0000 (08:03 +0200)]
tools/meson: update to 0.63.1
Release Notes:
- 0.62.0 https://mesonbuild.com/Release-notes-for-0-62-0.html
- 0.63.0 https://mesonbuild.com/Release-notes-for-0-63-0.html
- (other notes are not available)
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 05:55:14 +0000 (07:55 +0200)]
tools/fakeroot: update to 1.29
Release Notes:
https://salsa.debian.org/clint/fakeroot/-/commit/
8dd9e34a2e54862a902040d76adbd1c1a42ffc35
Refresh patches:
- 400-alpine-libc.musl-fix.patch
- 600-macOS.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 05:48:53 +0000 (07:48 +0200)]
tools/expat: update to 2.4.8
Release Notes:
https://github.com/libexpat/libexpat/blob/R_2_4_8/expat/Changes
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 05:26:52 +0000 (07:26 +0200)]
tools/bc: update to 1.07
Update to latest version. Replace mirror with @GNU/bc.
Manually refresh:
- 001-no_doc.patch
Add patch found here:
https://github.com/fivepiece/gnu-bc/commit/
26f275502dd28114e78bc098fed81acde1d86d62
as 002-fix-libmath.patch to fix compilation.
Add another patch found here:
https://github.com/archlinux/svntogit-packages/commit/
55b26eda94e1a9ff726ac458fccab5f3f3ad2114
as 003-bc-fix-hang.patch to prevent a hang when building the kernel.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 05:18:32 +0000 (07:18 +0200)]
tools/pkgconf: update to 1.9.3
Release Notes:
https://github.com/pkgconf/pkgconf/blob/pkgconf-1.9.3/NEWS
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 28 Aug 2022 19:21:32 +0000 (21:21 +0200)]
xdp-tools: update to v1.2.6
Release Notes:
https://github.com/xdp-project/xdp-tools/releases/tag/v1.2.6
The update contains important fixes for cross-compilation.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 21 Aug 2022 21:04:58 +0000 (23:04 +0200)]
tools/cmake: refresh patches
Previous commit forgot to refresh the patches.
This commit refreshes the patches:
- 120-curl-fix-libressl-linking.patch
- 130-bootstrap_parallel_make_flag.patch
Fixes: 3b2f19271cc2 ("tools/cmake: update to 3.24.1")
Signed-off-by: Nick Hainke <vincent@systemli.org>
Daniel Golle [Wed, 7 Sep 2022 02:50:42 +0000 (03:50 +0100)]
kernel: mtk_eth_soc: fix hw hash reporting for MT7986
Import patch from Linux 6.0.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 7 Sep 2022 02:54:34 +0000 (03:54 +0100)]
kernel: refresh patches
The introduction of the new Airoha target has left the tree in an
unfresh state. Refresh patches to improve that situation.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Tue, 6 Sep 2022 20:44:43 +0000 (22:44 +0200)]
mt76: update to the latest version
d70546462b7b mt76: fix 5 GHz connection regression on mt76x0/mt76x2
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Sun, 4 Sep 2022 13:15:13 +0000 (15:15 +0200)]
libsepol: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 4 Sep 2022 13:13:59 +0000 (15:13 +0200)]
libselinux: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:19:37 +0000 (18:19 +0200)]
mtd-utils: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:17:26 +0000 (18:17 +0200)]
libnfnetlink: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:15:24 +0000 (18:15 +0200)]
libmnl: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:11:51 +0000 (18:11 +0200)]
f2fs-tools: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:07:39 +0000 (18:07 +0200)]
libnl: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:04:57 +0000 (18:04 +0200)]
jansson: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:02:34 +0000 (18:02 +0200)]
libusb: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 16:00:30 +0000 (18:00 +0200)]
lldpd: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 15:51:24 +0000 (17:51 +0200)]
strace: replace PKG_CPE_ID
Searching for strace in nvd.nist.gov/products/cpe/search [0] will result
in "cpe:/a:strace_project:strace". Replace the current PKG_CPE_ID with
it.
[0] - https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.2&keyword=strace
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 15:42:56 +0000 (17:42 +0200)]
ethtool: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 15:38:43 +0000 (17:38 +0200)]
tools/bc: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 10:13:36 +0000 (12:13 +0200)]
libcap: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 3 Sep 2022 10:00:26 +0000 (12:00 +0200)]
nettle: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Daniel Golle [Mon, 5 Sep 2022 21:41:22 +0000 (22:41 +0100)]
kernel: rework Huawei-compatible OEM SFP GE-T
This patch was added in
09b086eecaa545cf7f30bc7e394a32751e25db65
("kernel: add quirk for Huawei-compatible OEM SFP GE-T"). Add patch
title, description and SoB to follow OpenWrt's developer guide for
working patches to prepare it for being sent upstream. This patch
should be discussed with Russell King and merged to Linux kernel.
Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Josef Schlehofer [Fri, 26 Aug 2022 14:21:44 +0000 (16:21 +0200)]
kernel: add support for HALNy HL-GSFP and other related fixes
It was reported on Turris forum [1] that HALNy HL-GSFP module does not
work as it should with kernel 5.15. Russell King prepared this patch
series, which fixes broken SFP module to work.
Compile and run tested with Turris Omnia.
[1] https://forum.turris.cz/t/hbl-turrisos-6-0-alpha2-halny-hl-gsfp-sfp-gpon-stick-problems/17547
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Felix Fietkau [Tue, 6 Sep 2022 10:12:12 +0000 (12:12 +0200)]
hostapd: rename hostapd multicast_to_unicast option to multicast_to_unicast_all
There are two feature currently altered by the multicast_to_unicast option.
1. bridge level multicast_to_unicast via IGMP snooping
2. hostapd/mac80211 config multicast_to_unicast setting
The hostapd/mac80211 setting has the side effect of converting *all* multicast
or broadcast traffic into per-station duplicated unicast traffic, which can
in some cases break expectations of various protocols.
It also has been observed to cause ARP lookup failure between stations
connected to the same interface.
The bridge level feature is much more useful, since it only covers actual
multicast traffic managed by IGMP, and it implicitly defaults to 1 already.
Renaming the hostapd/mac80211 option to multicast_to_unicast_all should avoid
unintentionally enabling this feature
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Petr Štetiar [Tue, 30 Aug 2022 06:41:07 +0000 (08:41 +0200)]
tools: remove xxd package
It shouldn't be needed anymore as we've now `scripts/xxdi.pl`, which
should be self contained and fully compatible `xxd -i` replacement.
Fixes: #10555
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 30 Aug 2022 06:45:39 +0000 (08:45 +0200)]
build: provide xxd -i with scripts/xxdi.pl
Dependency on xxd was added in commit
c4dd2441e787 ("tools: add xxd
(from vim)") as U-Boot requires xxd to create the default environment
from an external file.
Later in commit
2b94aac7a128 ("tools: xxd: use more convenient source
tarball"), xxd from another source was used instead, but that source is
currently unavailable, so let's fix it by using simple xxdi.pl Perl
script instead.
Fixes: #10555
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 30 Aug 2022 06:34:26 +0000 (08:34 +0200)]
scripts: xxdi.pl: add xxd -i compat mode
So it can serve as a standalone drop in replacement for xxd utility used
currently mostly in U-Boot packages with `xxd -i` mode which outputs C
include file style, with aim for byte to byte identical output, so the
eventual difference in the generated output is easily spottable.
Fixes: #10555
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Jo-Philipp Wich <jo@mein.io> [perl-fu]
Jo-Philipp Wich [Tue, 30 Aug 2022 16:20:04 +0000 (18:20 +0200)]
scripts: xxdi.pl: remove File::Slurp dependency
In order to make it more portable.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 30 Aug 2022 06:31:42 +0000 (08:31 +0200)]
scripts: add xxdi.pl
xxdi.pl is a Perl script that implements vim's 'xxd -i' mode so that
packages do not have to use all of vim just to get this functionality.
References: #10555
Source: https://github.com/gregkh/xxdi/blob/
97a6bd5cee05d1b15851981ec38ef5a460ddfcb1/xxdi.pl
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Daniel Golle [Tue, 6 Sep 2022 02:27:16 +0000 (03:27 +0100)]
mediatek: fix sysupgrade on MTK7986 rfba AP
A line in platform.sh was accidentally removed when adding support
for the Bananapi BPi-R3.
Re-add it to fix sysupgrade on the MTK7986 rfba AP.
Fixes: a96382c1bb ("mediatek: add support for Bananapi BPi-R3")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Tue, 23 Aug 2022 17:14:47 +0000 (19:14 +0200)]
ath79: move 5.15 testing kernel to common Makefile
All subtargets are using now 5.15 as testing kernel.
Move KERNEL_TESTING_PATCHVER:=5.15 to the common Makefile.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Tue, 23 Aug 2022 16:44:21 +0000 (18:44 +0200)]
ath79: tiny: add 5.15 support for tiny subtarget
Tested on Ubiquiti Nanostation M5 XM with low_mem.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Fri, 19 Aug 2022 16:59:36 +0000 (18:59 +0200)]
ath79: add low_mem to tiny image
Devices with SMALL_FLASH enabled have "SQUASHFS_BLOCK_SIZE=1024" in
their config. This significantly increases the cache memory required by
squashfs [0]. This commit enables low_mem leading to a much better
performance because the SQUASHFS_BLOCK_SIZE is reduced to 256.
Example Nanostation M5 (XM):
The image size increases by 128 KiB. However, the memory statisitcs look
much better:
Default tiny build:
------
MemTotal: 26020 kB
MemFree: 5648 kB
MemAvailable: 6112 kB
Buffers: 0 kB
Cached: 3044 kB
low_mem enabled:
-----
MemTotal: 26976 kB
MemFree: 6748 kB
MemAvailable: 11504 kB
Buffers: 0 kB
Cached: 7204 kB
[0] - https://github.com/freifunk-gluon/gluon/commit/
7e8af99cf504ca1dc389f282a0c94f4a911571be
Signed-off-by: Nick Hainke <vincent@systemli.org>
David Bauer [Mon, 29 Aug 2022 12:30:01 +0000 (14:30 +0200)]
ipq40xx: add support for Extreme Networks WS-AP3915i
Hardware
--------
Qualcomm IPQ4029 WiSoC
2T2R 802.11 abgn
2T2R 802.11 nac
Macronix MX25L25635E SPI-NOR (32M)
512M DDR3 RAM
1x Gigabit LAN
1x Cisco RJ-45 Console port
Settings: 115200 8N1
Installation
------------
1. Attach to the Console port. Power up the device and press the s key
to interrupt autoboot.
2. The default username / password to the bootloader is admin / new2day
3. Update the bootcommand to allow loading OpenWrt.
$ setenv ramboot_openwrt "setenv serverip 192.168.1.66;
setenv ipaddr 192.168.1.1; tftpboot 0x86000000 openwrt-3915.bin;
bootm"
$ setenv boot_openwrt "sf probe;
sf read 0x88000000 0x280000 0xc00000; bootm 0x88000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
4. Download the OpenWrt initramfs image. Serve it using a TFTP server as
"openwrt-3915.bin" at 192.1681.66.
5. Download & boot the OpenWrt initramfs image on the access point.
$ run ramboot_openwrt
6. Wait for OpenWrt to start.
7. Download and transfer the sysupgrade image to the device using e.g.
SCP.
8. Install OpenWrt to the device using "sysupgrade"
$ sysupgrade -n /path/to/openwrt.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 29 Aug 2022 15:36:46 +0000 (17:36 +0200)]
ipq-wifi: add Extreme Networks WS-AP3915i
Signed-off-by: David Bauer <mail@david-bauer.net>
Tomasz Maciej Nowak [Thu, 25 Aug 2022 18:26:11 +0000 (20:26 +0200)]
ipq40xx: point to externally compiled dtbs in recipes
Adjusting dts will cause a rebuild of whole kernel as the buildroot
considers this a part of kernel source. It's a royal PITA when trying to
prepare support for new device, since this takes a lot of time on slower
systems. As it stands, buildroot itself, with own rule, also compiles
dtbs and the results are $(KDIR)/image-$(DEVICE_DTS).dtb. With setting
DEVICE_DTS_DIR to directory holding the device dts (similarly to some
other targets), buildroot doesn't consider changed dts as part of kernel
source and rebuilds only dtb. This really speeds up development. And
since the kernel built dts are no longer used, drop the paches adding
dtses to its build.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Daniel Golle [Mon, 5 Sep 2022 13:04:17 +0000 (14:04 +0100)]
kernel: fix mvneta Ethernet after generic phylink validate
Import patches from Linux v5.16 and v5.17 to get 2500Base-X SFP working
again with mvneta driver after the generic phylink validate backport.
Fixes: aab466f422 ("kernel: backport generic phylink validate")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 5 Sep 2022 09:45:00 +0000 (11:45 +0200)]
mediatek: fix fallout after etron spinand backport
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 28 Aug 2022 18:35:03 +0000 (20:35 +0200)]
build: export STAGING_DIR_HOST in toplevel make code
Fixes ncurses pkg-config check for menuconfig
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Danzberger [Wed, 3 Aug 2022 15:31:03 +0000 (17:31 +0200)]
airoha: Add new target platform
Airoha is a new ARM platform based on Cortex-A53 which has recently been
merged into linux-next.
Due to BootROM limitations on this platform, the Cortex-A53 can't run in
Aarch64 mode and code must be compiled for 32-Bit ARM.
This support is based mostly on those linux-next commits backported
for kernel 5.15.
Patches:
1 - platform support = linux-next
2 - clock driver = linux-next
3 - gpio driver = linux-next
4 - linux,usable-memory-range dts support = linux-next
5 - mtd spinand driver
6 - spi driver
7 - pci driver (kconfig only, uses mediatek PCI) = linux-next
Still missing:
- Ethernet driver
- Sysupgrade support
A.t.m there exists one subtarget EN7523 with only one evaluation
board.
The initramfs can be run with the following commands from u-boot:
-
u-boot> setenv bootfile \
openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin
u-boot> tftpboot
u-boot> bootm 0x81800000
-
Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
Sander Vanheule [Sun, 4 Sep 2022 18:21:11 +0000 (20:21 +0200)]
realtek: replace fix for spurious GPIO interrupts
8 and 16 bit writes to the GPIO peripheral are apparently not supported,
and only worked most of the time. This resulted in garbabe writes to the
interrupt mask registers, causing spurious unhandled interrupts, which
could lead to CPU lock-ups as these kept retriggering.
Instead of clearing these spurious interrupt when they occur, the
upstream patch will just make sure all register writes have the intended
result, so these don't happen at all.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Rafał Miłecki [Sat, 3 Sep 2022 18:41:00 +0000 (20:41 +0200)]
bcm4908: fix Asus GT-AX6000 image
1. Include Linux DTB
2. Add 50991 variant (seems to differ by 1 PHY we don't support yet)
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Sat, 3 Sep 2022 01:24:14 +0000 (02:24 +0100)]
mediatek: mt7622: fix DTS compatible of UniFi 6 LR variants
Make sure the compatible string in DTS matches the now v1/v2
differentiated board name in target/linux/mediatek/image/mt7622.mk.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Mon, 29 Aug 2022 11:57:56 +0000 (13:57 +0200)]
uboot-envtools: update to 2022.07
Update to latest version.
Remove upstreamed patches:
- 100-fw_env-make-flash_io-take-buffer-as-an-argument.patch
- 101-fw_env-simplify-logic-code-paths-in-the-fw_env_open.patch
- 102-fw_env-add-fallback-to-Linux-s-NVMEM-based-access.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Josef Schlehofer [Tue, 30 Aug 2022 07:02:32 +0000 (09:02 +0200)]
kernel: build crypto md5/sha1/sha256 modules for powerpc
This builds and enables kernel optimized modules for mpc85xx target:
- CONFIG_CRYPTO_MD5_PPC [1]
- CONFIG_CRYPTO_SHA1_PPC_SPE [2]
- CONFIG_CRYPTO_SHA256_PPC_SPE [3]
Where it was possible, then use Signal Processing Engine, because
CONFIG_SPE is already enabled in mpc85xx config.
[1] https://cateee.net/lkddb/web-lkddb/CRYPTO_MD5_PPC.html
[2] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA1_PPC.html
[3] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA256_PPC_SPE.html
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Nick Hainke [Sat, 27 Aug 2022 17:53:17 +0000 (19:53 +0200)]
gdb: update to 12.1
Release Notes:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=gdb/NEWS;hb=gdb-12.1-release
Refresh patches:
- 110-shared_libgcc.patch
- 130-gdb-ctrl-c.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 12:21:18 +0000 (14:21 +0200)]
toolchain: gdb: update to 12.1
Release Notes:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=gdb/NEWS;hb=gdb-12.1-release
Refreshed patch:
- 120-fix-compile-flag-mismatch.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Ivan Pavlov [Wed, 31 Aug 2022 05:04:42 +0000 (08:04 +0300)]
wolfssl: bump to 5.5.0
Remove upstreamed: 101-update-sp_rand_prime-s-preprocessor-gating-to-match.patch
Some low severity vulnerabilities fixed
OpenVPN compatibility fixed (broken in 5.4.0)
Other fixes && improvements
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
Rafał Miłecki [Fri, 2 Sep 2022 15:07:40 +0000 (17:07 +0200)]
bcm4908: use upstream patches for Asus GT-AC5300 LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
John Audia [Wed, 31 Aug 2022 16:26:53 +0000 (12:26 -0400)]
kernel: bump 5.15 to 5.15.64
All patches automatically rebased
Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
Signed-off-by: John Audia <therealgraysky@proton.me>
Martin Kennedy [Tue, 30 Aug 2022 00:47:24 +0000 (20:47 -0400)]
mpc85xx: Drop pci aliases to avoid domain changes
As of upstream Linux commit
0fe1e96fef0a ("powerpc/pci: Prefer PCI
domain assignment via DT 'linux,pci-domain' and alias"), the PCIe
domain address is no longer numbered by the lowest 16 bits of the PCI
register address after a fallthrough. Instead of the fallthrough, the
enumeration process accepts the alias ID (as determined by
`of_alias_scan()`). This causes e.g.:
9000:00:00.0 PCI bridge: Freescale Semiconductor Inc P1020E (rev 11)
9000:01:00.0 Network controller: Qualcomm Atheros AR958x 802.11abgn ...
to become
0000:00:00.0 PCI bridge: Freescale Semiconductor Inc P1020E (rev 11)
0000:01:00.0 Network controller: Qualcomm Atheros AR958x 802.11abgn ...
... which then causes the sysfs path of the netdev to change,
invalidating the `wifi_device.path`s enumerated in
`/etc/config/wireless`.
One other solution might be to migrate the uci configuration, as was
done for mvebu in commit
0bd5aa89fcf2 ("mvebu: Migrate uci config to
new PCIe path"). However, there are concerns that the sysfs path will
change once again once some upstream patches[^2][^3] are merged and
backported (and `CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT` is enabled).
Instead, remove the aliases and allow the fallthrough to continue for
now. We will provide a migration in a later release.
This was first reported as a Github issue[^1].
[^1]: https://github.com/openwrt/openwrt/issues/10530
[^2]: https://lore.kernel.org/linuxppc-dev/
20220706104308.5390-1-pali@kernel.org/t/#u
[^3]: https://lore.kernel.org/linuxppc-dev/
20220706101043.4867-1-pali@kernel.org/
Fixes: #10530
Tested-by: Martin Kennedy <hurricos@gmail.com>
[Tested on the Aerohive HiveAP 330 and Extreme Networks WS-AP3825i]
Signed-off-by: Martin Kennedy <hurricos@gmail.com>
Claudiu Beznea [Thu, 28 Jul 2022 10:14:59 +0000 (13:14 +0300)]
at91bootstrap: use sdmmc0 as booting media for sama5d27_som1_ek
Commit
0b7c66c ("at91bootstrap: add sama5d27_som1_eksd1_uboot as
default defconfig") changed default booting media for sama5d27_som1_ek
board w/o any reason. Changed it back to sdmmc0 as it is for all the
other Microchip supported distributions for this board (Buildroot,
Yocto Project). The initial commit cannot be cleanly reverted.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Claudiu Beznea [Thu, 28 Jul 2022 10:12:34 +0000 (13:12 +0300)]
uboot-at91: use sdmmc0 as booting media for sama5d27_som1_ek
Commit
adc69fe (""uboot-at91: changed som1 ek default defconfigs")
changed the booting media to sdmmc1 as default booting w/o any reason.
The Microchip releases for the rest of supported distributions (Buildroot,
Yocto Project) uses sdmmc0 as default booting media for this board.
Thus change it back to sdmmc0. With this remove references to sdmmc1
config. The initial commit cannot be cleanly reverted.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Daniel Golle [Thu, 1 Sep 2022 20:40:44 +0000 (21:40 +0100)]
kernel: fix DSA mac_select_pcs backport
Backport commit from Linux 5.18 fixing phylink with DSA drivers which
do not provide mac_select_pcs yet.
Fixes: aab466f422 ("kernel: backport generic phylink validate")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Thu, 1 Sep 2022 18:41:42 +0000 (20:41 +0200)]
unetd: update to the latest version
f5d02c32f811 pex: add support for sending endpoint notification from the wg port via raw socket
c3b1127236a0 ubus: add support for querying active networks
8ad119715168 ubus: add support for adding auth_connect hosts at runtime
26dc52789d41 network: add support for configuring extra peers via a separate json file
d7fb9e5b065b ubus: add reload command
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 31 Aug 2022 11:29:32 +0000 (13:29 +0200)]
unetd: fix handling of connect/tunnel list
change the type to array, so that uci lists can be used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Thu, 1 Sep 2022 10:37:58 +0000 (12:37 +0200)]
firewall4: update to latest Git HEAD
f5fcdcf cli: introduce test mode and refuse firewall restart on errors
a540f6d fw4: fix cosmetic issue with per-ruleset and per-table include paths
695e821 doc: fix swapped include positions in nftables.d README
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Nick Hainke [Mon, 29 Aug 2022 06:08:40 +0000 (08:08 +0200)]
nettle: update to 3.8.1
Release Notes:
https://lists.gnu.org/archive/html/info-gnu/2022-07/msg00010.html
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 29 Aug 2022 06:25:03 +0000 (08:25 +0200)]
readline: update to 8.1.2
Update to latest version.
Signed-off-by: Nick Hainke <vincent@systemli.org>
projects / openwrt / staging / nbd.git / log