drm/amd/powerplay: cover the powerplay implementation details V3

This can save users much troubles. As they do not
actually need to care whether swSMU or traditional
powerplay routine should be used.

V2: apply the fixes to vi.c and cik.c also
V3: squash in oops fix

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Improve function get_sdma_rlc_reg_offset() (v2)

The SOC15_REG_OFFSET() macro needs to dereference adev->reg_offset[IP]
pointer, which is sometimes NULL when there are fewer than 8 sdma engines.
Avoid that by not initializing the array regardless.

v2: squash in warning fixes

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Use u64 divide macro for round up division

[why]
Fix compilation warnings on i386 architecture:
undefined reference to `__udivdi3'
[how]
Switch DIV_ROUND_UP to DIV64_U64_ROUND_UP

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.6-2020-01-10-dp-mst-dsc' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.6-2020-01-10-dp-mst-dsc:

drm:
- Add MST helper for PBN calculation of DSC modes
- Parse FEC caps on MST ports
- Add MST DPCD R/W functions
- Add MST helpers for virtual DPCD aux
- Add MST HUB quirk
- Add MST DSC enablement helpers

amdgpu:
- Enable MST DSC
- Add fair share algo for DSC bandwidth calcs
- Fix for 32 bit builds

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110214328.308549-1-alexander.deucher@amd.com

Merge tag 'amd-drm-next-5.6-2020-01-09' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.6-2020-01-09:

amdgpu:
- Enable DCN support on POWER
- Enable GFXOFF for Raven1 refresh
- Clean up MM engine idle handlers
- HDMI 2.0 audio fixes
- Fixes for some 10 bpc EDP panels
- Watermark fixes for renoir
- SR-IOV fixes
- Runtime pm robustness fixes
- Arcturus VCN fixes
- RAS fixes
- BACO fixes for Arcturus
- Stable pstate fixes for swSMU
- HDCP fixes
- PSP cleanup
- HDMI fixes
- Misc cleanups

amdkfd:
- Spread interrupt work across cores to reduce latency
- Topology fixes for APUs
- GPU reset improvements

UAPI:
- Enable DRIVER_SYNCOBJ_TIMELINE for vulkan
- Return better error values for kfd process ioctl

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109230338.8022-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2020-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:

Cross-subsystem Changes:
- Convert simple panel bindings to a template.

Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
  between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.

Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
  BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com

drm/amd/display: Fix compilation warnings on i386

[why]
Compilation error "undefined reference to `__udivdi3'" was
thrown on i386 architecture.

[how]
Use div_u64 for unsigned long division instead of a divide operator.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: fix documentation of drm_dp_mst_add_affected_dsc_crtcs

the parameter is the mst manager, not the port.

Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: protect new DSC code with CONFIG_DRM_AMD_DC_DCN

Otherwise we get undefined symbols.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: add dp helper to initialize remote aux channel.

[why]
We need to minimally initialize the remote aux channel, e.g. the
crc work struct of remote aux to dump the sink's DPRX CRCs in MST
setup.

[how]
Add helper that only initializes the crc work struct of the remote
aux, hooke crc work queue to 'drm_dp_aux_crc_work'. Then call this
helper in DP MST port initialization.
This, plus David Francis' patch [1], fix the issue of MST remote
aux DPCD CRCs read.

[1] https://patchwork.kernel.org/patch/11217941/

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger modesets on MST DSC connectors

Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.

Therefore, whenever a crtc has drm_atomic_crtc_needs_modeset,
for each crtc that shares a MST topology with that stream and
supports DSC, add that crtc (and all affected connectors and
planes) to the atomic state and set mode_changed on its state

v2: Do this check only on Navi and before adding connectors
and planes on modesetting crtcs

v3: Call the drm_dp_mst_add_affected_dsc_crtcs() to update
all affected CRTCs

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs

[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.

[how]
Adding helper to trigger modesets on MST DSC connectors
by setting mode_changed flag on CRTCs in the same topology
as affected connector

v2: use drm_dp_mst_dsc_aux_for_port function to verify
if the port is DSC capable

v3: - added _must_check attribute
    - removed topology manager check
    - fix typos and indentations

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Recalculate VCPI slots for new DSC connectors

[why]
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.

[how]
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it and calls drm_dp_helper_update_vcpi_slots_for_dsc to
update connector's VCPI slots.

v2: - use drm_dp_mst_atomic_enable_dsc per port to
enable/disable DSC

v3: - Iterate through connector states from the state passed
    - On each connector state get stream from dc_state,
instead CRTC state

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check return value of drm helper

If driver fails to update update VCPI allocation during
compute_mst_dsc_configs_for_state - fail the function
by return early.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: MST DSC compute fair share

If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network

Implement an algorithm to determine the correct DSC config
for each stream

The algorithm:
This
     [                   ]          ( )
represents the range of bandwidths possible for a given stream.
The [] area represents the range of DSC configs, and the ()
represents no DSC. The bandwidth used increases from left to right.

First, try disabling DSC on all streams
     [                  ]          (|)
     [                     ]            (|)
Check this against the bandwidth limits of the link and each branch
(including each endpoint). If it passes, the job is done

Second, try maximum DSC compression on all streams
that support DSC
     [|         ]        ( )
     [|                ]         ( )
If this does not pass, then enabling this combination of streams
is impossible

Otherwise, divide the remaining bandwidth evenly amongst the streams
     [        |  ]         ( )
     [        |      ]        ( )

If one or more of the streams reach minimum compression, evenly
divide the reamining bandwidth amongst the remaining streams
     [    |] ( )
     [       |]   ( )
     [                 |   ]               ( )
     [                 |      ]                  ( )

If all streams can reach minimum compression, disable compression
greedily
     [      |]  ( )
     [        |]    ( )
     [                 ]                                (|)

Perform this algorithm on each full update, on each MST link
with at least one DSC stream on it

After the configs are computed, call
dcn20_add_dsc_to_stream_resource on each stream with DSC enabled.
It is only after all streams are created that we can know which
of them will need DSC.

Do all of this at the end of amdgpu atomic check.  If it fails,
fail check; This combination of timings cannot be supported.

v2: Use drm_dp_mst_atomic_check to validate bw for certain dsc
configurations

v3: Use dc_dsc_policy structure to get min and max bpp rate
for DSC configuration

Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add PBN per slot calculation for DSC

[why]
Need to calculate VCPI slots differently for DSC
to take in account current link rate, link count
and FEC.
[how]
Add helper to get pbn_div from dc_link

Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Rename drm_dp_mst_atomic_check_topology_state

[why]
drm_dp_mst_atomic_check_topology_state() should be renamed
to reflect more specific type of check. Since it is verifying
payload allocation limit it should be renamed into
drm_dp_mst_atomic_check_vcpi_alloc_limit()

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add branch bandwidth validation to MST atomic check

[why]
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check after
drm_dp_mst_atomic_check_topology_state to fully verify that
the proposed topology is supported.

v2: Fixing some typos and indenting
v3: Return correct error enums if no bw space available

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add DSC enablement helpers to DRM

Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.

Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI slots is expected to be done
in encoder's atomic_check.

v2: squash separate functions into one and call it per
port
v3: Fix comment typos

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Manually overwrite PBN divider for calculating timeslots

[why]
For DSC case we cannot use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore the driver has to calculate its own divider based
on the link rate and lane count its handling, as it is hw specific.

[how]
Pass pbn_div as an argument, which is used if its more than
zero, otherwise default topology manager's pbn_div will be used.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Write DSC enable to MST DPCD

Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.

Use the cached dsc_aux field.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Validate DSC caps on MST endpoints

During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.

Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Initialize DSC PPS variables to 0

For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.

memset to 0 to avoid this

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add new quirk for Synaptics MST hubs

Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs.  Add a new quirk to detect this case.

v2: Fix error when checking return of drm_dp_read_desc

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add helpers for MST DSC and virtual DPCD aux

Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.

As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual DPCD
is a DP feature new in DP v1.4, which exposes certain DPCD
registers on virtual ports.

v2: Remember to unlock mutex on all paths
v3: Refactor to match coding style and increase brevity
v4: - Check DSC capable MST sink connected directly to the device.
    - Check branch's port_parent to be set

Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Fill branch->num_ports

This field on drm_dp_mst_branch was never filled

It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.

v2: remember to decrement on port removal
v3: don't explicitly init to 0
v4: move decrement of num_ports to unlink_port function

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add MST support to DP DPCD R/W functions

Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.

This means that DRM drivers can make MST DPCD read/writes.

v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix calling wrong function on DPCD write
v5: delete deprecated include of drmP.h

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Parse FEC capability on MST ports

As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.

The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)

That value is needed for FEC and DSC support

Store it on drm_dp_mst_port

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add PBN calculation for DSC modes

With DSC, bpp can be fractional in multiples of 1/16.

Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel

v2: Don't add separate function for this
v3: In the equation divide bpp by 16 as it is expected
not to leave any remainder
v4: Added DSC test parameters for selftest

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Improve kfd_process lookup in kfd_ioctl

Use filep->private_data to store a pointer to the kfd_process data
structure. Take an extra reference for that, which gets released in
the kfd_release callback. Check that the process calling kfd_ioctl
is the same that opened the file descriptor. Return -EBADF if it's
not, so that this error can be distinguished in user mode.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support

Add support for the Satoz SAT050AT40H12R2 panel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-2-miquel.raynal@bootlin.com

dt-bindings: display: simple: Add Satoz panel

Satoz is a Chinese TFT manufacturer.
Website: http://www.sat-sz.com/English/index.html

Add the compatible for its SAT050AT40H12R2 5.0 inch LCD panel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-1-miquel.raynal@bootlin.com

dt-bindings: display: Convert Allwinner display pipeline to schemas

The Allwinner SoCs have a display engine composed of several controllers
assembled differently depending on the SoC, the number and type of output
they have, and the additional features they provide. A number of those are
supported in Linux, with the matching bindings.

Now that we have the DT validation in place, let's split into separate file
and convert the device tree bindings for those controllers to schemas.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech

drm/fb-cma-helpers: Fix include issue

Exported functions prototypes are missing in drm_fb_cma_helper.c
Include drm_fb_cma_helper to fix that issue.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119105753.32363-1-benjamin.gaignard@st.com

drm/modes: tag unused variables to avoid warnings

Some variables are set but never used. To avoid warning when compiling
with W=1 and keep the algorithm like it is tag theses variables
with _maybe_unused macro.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210102437.19377-1-benjamin.gaignard@st.com

drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simple

This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple
driver. The panel is used by the pine64 Pinebook Pro.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109112952.2620-2-t.schramm@manjaro.org

dt-bindings: display: add BOE 14" panel

Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel.

The panel is used by the pine64 Pinebook Pro.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tobias Schramm <t.schramm@manjaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109140742.GA12940@ravnborg.org

drm/panel: Add driver for Sony ACX424AKP panel

The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org

drm/udl: Make udl driver depend on CONFIG_USB

The udl driver for DisplayLink devices depends on support for host-side
USB controllers, which is enabled with CONFIG_USB. Plain USB support as
given by CONFIG_USB_SUPPORT is not sufficient.

This patch changes dependencies for udl to depend on CONFIG_USB, instead
of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a
USB host controller. With this change udl dependencies work the same way
as dependencies for PCI drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de

drm/Kconfig: add missing 'depends on DRM' for DRM_DP_CEC

Add a missing 'depends on DRM' for the DRM_DP_CEC config
option. Without that enabling DRM_DP_CEC will force CEC_CORE
to =y instead of =m if DRM=m as well.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/489bdaae-9b05-2d70-12e1-4fda7899dfc1@xs4all.nl

dt-bindings: panel-simple: Add compatible for Sharp LS020B1DD01D

Add a compatible string for the Sharp LS020B1DD01D 2" HQVGA TFT LCD
panel, and remove the old sharp,ls020b1dd01d.txt documentation which is
now obsolete.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-2-paul@crapouillou.net

dt-bindings: panel-simple: Add compatible for GiantPlus GPM940B0

Add a compatible string for the GiantPlus GPM740B0 3" QVGA TFT LCD
panel, and remove the old giantplus,gpm740b0.txt documentation which is
now obsolete.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-1-paul@crapouillou.net

drm/lima: use drm_sched_fault for error task handling

drm_sched_job_timedout works with drm_sched_stop as a pair,
so we'd better use the drm_sched_fault helper to make the
error and timeout handling go the same path.

This also fixes application hang when task error.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200101103831.22429-1-yuq825@gmail.com

Merge tag 'drm-misc-next-2020-01-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Allow overriding number of bootup penguins in fbcon using fbcon=logo-count:n.

Cross-subsystem Changes:
- fbdev fixes for mmp, and make it work with CONFIG_COMPILE_TEST.
- Use devm_platform_ioremap_resource in fbdev drivers.
- Various small fbdev fixes.

Core Changes:
- Support scanline alignment for dumb buffers.
- Add atomic_check() hook to bridge ops, to support bus format negotiation.
- Add gem_create_object() to vram helpers.

Driver Changes:
- Rockchip: Add support for PX30.
- Use generic fbdev code and dumb helpers in hisilicon/hibmc.
- Add support for Leadtek LTK500HD1829 panel, and xinpeng XPP055C272.
- Clock fixes for atmel-hlcdc.
- Various smaller fixes to all drivers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8eff1e3f-ef0a-2dd9-9a14-6273b1d6f963@linux.intel.com

drm: of: Fix linking when CONFIG_OF is not set

The new helper drm_of_lvds_get_dual_link_pixel_order() introduced in
commit 6529007522de has a fallback stub when CONFIG_OF is not set, but
the stub is declared in drm_of.h without a static inline. This causes
multiple definitions of the function to be linked when the CONFIG_OF
option isn't set. Fix it by making the stub static inline.

Fixes: 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219103703.8547-1-laurent.pinchart+renesas@ideasonboard.com

drm/panel: Add support for AUO B116XAK01 panel

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-2-robdclark@gmail.com

dt-bindings: display: panel: Add AUO B116XAK01 panel bindings

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-1-robdclark@gmail.com

dt-bindings: Add vendor prefix for Satoz

Satoz is a Chinese TFT manufacturer.
Website: http://www.sat-sz.com/English/index.html

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106151827.31511-1-miquel.raynal@bootlin.com

dt-bindings: one binding file for all simple panels

There is an increasing number of new simple panels.
Common for many of these simple panels are that they have one
mandatory power-supply and some of them have backlight and / or
an enable gpio.

The binding file to describe these panels adds overhead
that really do not add value.
The binding are known and there is nothing gained from a
dedicated binding file nor for any dedicated example.

The following patch introduces a single panel-simple.yaml
and converts two ampire bindings over to the new file.

The conversion - if applied will have following effects:

- The maintainer for the individual file will change
    There is no need for many different maintainers for a simple binding.
    We have the same situation with the panel-simple driver in the kernel.

- The license will change to (GPL-2.0-only OR BSD-2-Clause)
    There is usually only a single line copied from the original
    file, a line that is often copied from a datasheet.
    This license change should be acceptable considered what little
    is copied.
    If the license change is not OK we can use a dedicated binding
    file in these cases.

This is a follow-up on Rob's big patch converting a lot of panel bindings
to individual files:

"dt-bindings: display: Convert a bunch of panels to DT schema"
https://patchwork.ozlabs.org/patch/1197683/

The objectives with one file for the relevant simple panels are:
- Make it simpler to add bindings for simple panels
- Keep the number of bindings file lower and thus easier to find a
  relevant file to copy from when adding new panels.
- Keep the binding documentation for simple panels more consistent
- Make it simpler to add support for new panels

v3:
  - Whitespace fix (checkpatch)
  - Indent compatible (Rob h)
  - Indent comments to give compatible more visibility (Rob h)

v2:
  - spelling fixes (imirkin via irc, Rob)
  - updated description (Rob)
  - list properires in alphabetical order
  - added power-supply to example (Rob)
  - updated title
  - reworded changelog a little

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200102101712.5085-2-sam@ravnborg.org

gpu/drm: clean up white space in drm_legacy_lock_master_cleanup()

We moved this code to a different file and accidentally deleted a
newline.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108054312.yzlj5wmbdktejgob@kili.mountain

drm/omapdrm: use BUG_ON macro for error debugging.

Since the if statement only checks for the value of the `id` variable,
it can be replaced by the more concise BUG_ON() macro for error
reporting.
Issue found using coccinelle.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102095515.7106-1-wambui.karugax@gmail.com

drm: meson: fix address type confusion

Casting a pointer to dma_addr_t produces a warning:

drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free':
drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
  priv->rdma.addr_phys = (dma_addr_t)NULL;

In this case, it's worse because the variable name has the suffix
'_phys', which often indicates a phys_addr_t rather than dma_addr_t,
i.e. yet another incompatible type.

Change it to use consistent naming and avoid NULL.

Fixes: 63fba242c464 ("drm/meson: add RDMA module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de

drm/gma500: remove set but not used variables 'hist_reg'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/psb_irq.c: In function psb_irq_turn_off_dpst:
drivers/gpu/drm/gma500/psb_irq.c:473:6:
warning: variable hist_reg set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227114811.14907-1-chenzhou10@huawei.com

drm/sun4i: drc: Make sure we enforce the clock rate

The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.

Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech

drm/sun4i: backend: Make sure we enforce the clock rate

The backend needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.

Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech

drm/exynos: dsi: Fix bridge chain handling

Commit 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the Exynos driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:

1/ list_splice() was used to move chain elements to our own internal
   chain, but list_splice() does not reset the source list to an empty
   state, leading to unexpected bridge hook calls when
   drm_bridge_chain_xxx() helpers were called by the core. Replacing
   the list_splice() call by list_splice_init() fixes this problem.

2/ drm_bridge_chain_xxx() helpers operate on the
   bridge->encoder->bridge_chain list, which is now empty. When the
   helper uses list_for_each_entry_reverse() we end up with no operation
   done which is not what we want. But that's even worse when the helper
   uses list_for_each_entry_from(), because in that case we end up in
   an infinite loop searching for the list head element which is no
   longer encoder->bridge_chain but exynos_dsi->bridge_chain. To address
   that problem we stop using the bridge chain helpers and call the
   hooks directly.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-3-boris.brezillon@collabora.com

drm/vc4: dsi: Fix bridge chain handling

Commit 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the VC4 driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:

1/ list_splice() was used to move chain elements to our own internal
   chain, but list_splice() does not reset the source list to an empty
   state, leading to unexpected bridge hook calls when
   drm_bridge_chain_xxx() helpers were called by the core. Replacing
   those list_splice() calls by list_splice_init() ones fixes this
   problem.

2/ drm_bridge_chain_xxx() helpers operate on the
   bridge->encoder->bridge_chain list, which is now empty. When the
   helper uses list_for_each_entry_reverse() we end up with no operation
   done which is not what we want. But that's even worse when the helper
   uses list_for_each_entry_from(), because in that case we end up in
   an infinite loop searching for the list head element which is no
   longer encoder->bridge_chain but vc4_dsi->bridge_chain. To address
   that problem we stop using the bridge chain helpers and call the
   hooks directly.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-2-boris.brezillon@collabora.com

video: fbdev: mmp: fix platform_get_irq.cocci warnings

Remove dev_err() messages after platform_get_irq*() failures.
Line 450 is redundant because platform_get_irq() already prints
an error.

Generated by: scripts/coccinelle/api/platform_get_irq.cocci

Fixes: dd90e9ae55a1 ("video: fbdev: mmp: add COMPILE_TEST support")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2001042140310.6944@hadrien

Revert "drm/bridge: Add a drm_bridge_state object"

This reverts commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") which introduced a circular dependency between drm.ko and
drm_kms_helper.ko. Looks like the helper/core split is not appropriate
and fixing that is not simple.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com

Revert "drm/bridge: Patch atomic hooks to take a drm_bridge_state"

This reverts commit f7619a58ef92 ("drm/bridge: Patch atomic hooks to
take a drm_bridge_state"). Commit 6ed7e9625fa6 ("drm/bridge: Add a
drm_bridge_state object") introduced a circular dependency between
drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the
whole thing was implemented. Let's revert all patches depending on the
bridge_state infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com

Revert "drm/bridge: Add an ->atomic_check() hook"

This reverts commit b86d895524ab ("drm/bridge: Add an ->atomic_check()
hook"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") introduced a circular dependency between drm.ko and
drm_kms_helper.ko which uncovered a misdesign in how the whole thing
was implemented. Let's revert all patches depending on the bridge_state
infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com

Revert "drm/bridge: Add the necessary bits to support bus format negotiation"

This reverts commit e351e4d5eaec ("drm/bridge: Add the necessary bits
to support bus format negotiation"). Commit 6ed7e9625fa6 ("drm/bridge:
Add a drm_bridge_state object") introduced a circular dependency
between drm.ko and drm_kms_helper.ko which uncovered a misdesign in
how the whole thing was implemented. Let's revert all patches depending
on the bridge_state infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com

Revert "drm/bridge: Fix a NULL pointer dereference in drm_atomic_bridge_chain_check()"

This reverts commit b18398c16e17 ("drm/bridge: Fix a NULL pointer
dereference in drm_atomic_bridge_chain_check()"). Commit 6ed7e9625fa6
("drm/bridge: Add a drm_bridge_state object") introduced a circular
dependency between drm.ko and drm_kms_helper.ko which uncovered a
misdesign in how the whole thing was implemented. Let's revert all
patches depending on the bridge_state infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-2-boris.brezillon@collabora.com

drm: Set crc->opened to false before setting crc source to NULL.

to terminate the while-loop in drm_dp_aux_crc_work when
drm_dp_start/stop_crc are called in the hook to set crc source.

v3: set crc->opened to false without checking (Nick)
v2: Move spin_lock around entire crc->opened use (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726173743.11641-1-dingchen.zhang@amd.com

drm: remove the newline for CRC source name.

userspace may transfer a newline, and this terminating newline
is replaced by a '\0' to avoid followup issues.

'len-1' is the index to replace the newline of CRC source name.

v3: typo fix (Sam)

v2: update patch subject, body and format. (Sam)

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com

drm: zte: Provide ddc symlink in vga connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-5-andrzej.p@collabora.com

drm: zte: Provide ddc symlink in hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-4-andrzej.p@collabora.com

drm/vc4: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-3-andrzej.p@collabora.com

drm/tegra: Provide ddc symlink in output connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-2-andrzej.p@collabora.com

drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded

For high-res (8K) or HFR (4K120) displays, using uncompressed pixel
formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the
"interesting" modes would be disabled, leaving only low-res or low
framerate modes.

This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS
clock is exceeded. Verified that 8K30 and 4K120 are now available and
working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add event type check before restart the authentication

[Why]
Some combined docks will always trigger CP_IRQ but there's nothing the driver
needs to take care of, but the CP_IRQ breaks the original hdcp state and
triggers the driver to restart the authentication.

[How]
Add the event type check before restart the authentication or resend the stream
management

Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add delay after h' watchdog timeout event

[WHY]
Some monitors trigger HDCP2.x timeout after reinitializing (e.g. toggling HDR)
by taking longer than expected to return h' (h prime)
Previously the 200ms watchdog timer retry count would hit
MAX_NUM_OF_ATTEMPTS (4), causing fallback to HDCP1.x

[HOW]
Adding a 1s delay after an h' watchdog timeout provides enough time
for affected monitors to return h' in time without hitting MAX_NUM_OF_ATTEMPTS

Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rx_validation failed resume from sleep

[why]
Most DP/HDMI monitors need more time to response rx_validation
request.

[how]
Add generic 1000ms delay.

Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Return correct Error code for validate h_prime

[Why]
We are returning incorrect error code for validate h prime

[How]
Return the right Error code

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix hdcp1 create session

[Why]
PSP needs session ID to destroy a session, In the case where we fail
create session we don't have a session ID

[How]
Set the session ID before returning

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix psp return condition for hdcp module

We are returning SUCCESS when hdcp_status != Success. Fix it.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: use list_for_each_entry for list iteration.

list_for_each() can be replaced by the more concise
list_for_each_entry() here for iteration over the lists.
This change was reported by coccinelle.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove unnecessary braces around conditionals.

As single statement conditionals do not need to be wrapped around
braces, the unnecessary braces can be removed.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove boolean checks in if statements.

Remove unnecessary variable comparisions to true/false in if statements
and check the value of the variable directly.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Set no-retry as default."

This reverts commit 51bfac71cade386966791a8db87a5912781d249f.

This causes stability issues on some raven boards.  Revert
for now until a proper fix is completed.

Bug: https://gitlab.freedesktop.org/drm/amd/issues/934
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206017
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: simplify old firmware warning

Put it on one line to avoid whitespace issues when
printing in the log.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: use common invalidation engine helper

Rather than open coding it.  This also changes the free masks
to better reflect the usage by other components.

Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc: move invaliation bitmap setup to common code

So it can be shared with newer GMC versions.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: updated UMC error address record with correct channel index

defined macros for repetitive for loops

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: resolved bug in UMC RAS CE query

switch CE counter register access' to use SMN

disable UMC indexing mode

Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: cleanup the interfaces for powergate setting through SMU

Provided an unified entry point. And fixed the confusing that the API
usage is conflict with what the naming implies.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: issue proper hdp flush for table transferring

Guard the content consistence between the view of GPU and CPU
during the table transferring.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine code to support no-dpm case

With "dpm=0", there will be no DPM enabled. The code
needs to be refined to support this.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: unified VRAM address for driver table interaction with SMU V2

By this, we can avoid to pass in the VRAM address on every table
transferring. That puts extra unnecessary traffics on SMU on
some cases(e.g. polling the amdgpu_pm_info sysfs interface).

V2: document what the driver table is for and how it works

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: cache the watermark settings on system memory

So that we do not need to allocate a piece of VRAM for it. This
is a preparation for coming change which unifies the VRAM address
for all driver tables interaction with SMU.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/smu: custom pstate profiling clock frequence for navi series asics

add navi10 & navi14 pstate profiling clock value support.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: L1 Policy(5/5) - removed IH_CHICKEN from VF

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: L1 Policy(3/5) - removed ECC interrupt from VF

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: L1 Policy(2/5) - removed GC GRBM violations from gfxhub

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: L1 Policy(1/5) - removed VM settings for mmhub and gfxhub from VF

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: removed GFX RAS support check in UMC ECC callback

enable GPU recovery in event of uncorrectable UMC error

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added function to wait for PSP BL availability

reduced duplicate code

increased wait time for PSP BL readiness

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use linux size macro to simplify ONE_Kib & One_Mib

replace internal size macro with linux size macro

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: resolve bug in UMC 6 error counter query

iterate over all error counter registers in SMN space

removed support error counter access via MMIO

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add smu11_driver_if_arcturus.h new OOB members

This is to fit the latest SMC firmware and it's backward compatible.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>