drm/i915/selftests: Handle a potential failure of intel_ring_begin

Silence smatch over:

drivers/gpu/drm/i915/selftests/intel_workarounds.c:58 read_nonprivs() error: 'cs' dereferencing possible ERR_PTR()

by handling a potential (but unlikely) failure of intel_ring_begin.

Fixes: f4ecfbfc32ed ("drm/i915: Check whitelist registers across resets")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523915821-30624-1-git-send-email-oscar.mateo@intel.com

drm/i915: Call i915_perf_fini() on init_hw error unwind

We have to cleanup after i915_perf_init(), even on the error path, as it
passes a pointer into the module to the sysfs core. If we fail to
unregister the sysctl table, we leave a dangling pointer which then may
explode anytime later.

Fixes: 9f9b2792b6d3 ("drm/i915/perf: reuse timestamp frequency from device info")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414091233.32224-1-chris@chris-wilson.co.uk

drm/i915: Check whitelist registers across resets

Add a selftest to ensure that we restore the whitelisted registers after
rewrite the registers everytime they might be scrubbed, e.g. module
load, reset and resume. For the other volatile workaround registers, we
export their presence via debugfs and check in igt/gem_workarounds.
However, we don't export the whitelist and rather than do so, let's test
them directly in the kernel.

The test we use is to read the registers back from the CS (this helps us
be sure that the registers will be valid for MI_LRI etc). In order to
generate the expected list, we split intel_whitelist_workarounds_emit
into two phases, the first to build the list and the second to apply.
Inside the test, we only build the list and then check that list against
the hw.

v2: Filter out pre-gen8 as they do not have RING_NONPRIV.
v3: Drop unused engine parameter, no plans to use it now or future.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414122754.569-1-chris@chris-wilson.co.uk

drm/i915/guc: Remove GUC_CTL_DEVICE_INFO parameter

It looks that GuC does not actively use GUC_CTL_DEVICE_INFO parameter
where we are passing GT type and Core family values.
Let's stop/remove setup of this parameter and remove related
definitions.

v2: (this time without squashed HAX)
  - New title and description
  - Remove also GUC_CORE_FAMILY_* definitions (Michel)
v3:
  - The removed define GUC_CTL_DEVICE_INFO has been restored (Michel)
  - Updated description (Sagar)
v4: rebase

Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: John A Spotswood <john.a.spotswood@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180413085245.57206-1-piotr.piorkowski@intel.com

drm/i915: Update DRIVER_DATE to 20180413

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/cnl: Use mmio access to context status buffer

Evidence indicates that Cannonlake HWSP is not coherent
as it should. Revert to using mmio access for now.

Testcase: igt/gem_ctx_switch
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180412145802.23313-1-mika.kuoppala@linux.intel.com

drm/i915/bios: reduce the scope of some local variables in parse_ddi_port()

No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-2-jani.nikula@intel.com

drm/i915/bios: filter out invalid DDC pins from VBT child devices

The VBT contains the DDC pin to use for specific ports. Alas, sometimes
the field appears to contain bogus data, and while we check for it later
on in intel_gmbus_get_adapter() we fail to check the returned NULL on
errors. Oops results.

The simplest approach seems to be to catch and ignore the bogus DDC pins
already at the VBT parsing phase, reverting to fixed per port default
pins. This doesn't guarantee display working, but at least it prevents
the oops. And we continue to be fuzzed by VBT.

One affected machine is Dell Latitude 5590 where a BIOS upgrade added
invalid DDC pins.

Typical backtrace:

[   35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin))
[   35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1
[   35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461450] Workqueue: events_unbound async_run_entry_fn
[   35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286
[   35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960
[   35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[   35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000
[   35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000
[   35.461477] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461479] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461486] Call Trace:
[   35.461501]  intel_hdmi_set_edid+0x37/0x27f [i915]
[   35.461515]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461518]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461521]  drm_setup_crtcs+0x129/0xa6a
[   35.461523]  ? __switch_to_asm+0x34/0x70
[   35.461525]  ? __switch_to_asm+0x34/0x70
[   35.461527]  ? __switch_to_asm+0x40/0x70
[   35.461528]  ? __switch_to_asm+0x34/0x70
[   35.461529]  ? __switch_to_asm+0x40/0x70
[   35.461531]  ? __switch_to_asm+0x34/0x70
[   35.461532]  ? __switch_to_asm+0x40/0x70
[   35.461534]  ? __switch_to_asm+0x34/0x70
[   35.461536]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461538]  ? __switch_to_asm+0x40/0x70
[   35.461541]  ? _cond_resched+0x10/0x33
[   35.461557]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461560]  async_run_entry_fn+0x2e/0xf5
[   35.461563]  process_one_work+0x15b/0x364
[   35.461565]  worker_thread+0x2c/0x3a0
[   35.461567]  ? process_one_work+0x364/0x364
[   35.461568]  kthread+0x10c/0x122
[   35.461570]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461572]  ret_from_fork+0x35/0x40
[   35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00
[   35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461606] ---[ end trace 4fe1e63e2dd93373 ]---
[   35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[   35.461613] IP: i2c_transfer+0x4/0x86
[   35.461614] PGD 0 P4D 0
[   35.461616] Oops: 0000 [#1] SMP PTI
[   35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G        W        4.16.0-rc7.x64-g1cda370ffded #1
[   35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461628] Workqueue: events_unbound async_run_entry_fn
[   35.461630] RIP: 0010:i2c_transfer+0x4/0x86
[   35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246
[   35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001
[   35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000
[   35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002
[   35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07
[   35.461641] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461643] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461649] Call Trace:
[   35.461652]  drm_do_probe_ddc_edid+0xb3/0x128
[   35.461654]  drm_get_edid+0xe5/0x38d
[   35.461669]  intel_hdmi_set_edid+0x45/0x27f [i915]
[   35.461684]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461687]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461689]  drm_setup_crtcs+0x129/0xa6a
[   35.461691]  ? __switch_to_asm+0x34/0x70
[   35.461693]  ? __switch_to_asm+0x34/0x70
[   35.461694]  ? __switch_to_asm+0x40/0x70
[   35.461696]  ? __switch_to_asm+0x34/0x70
[   35.461697]  ? __switch_to_asm+0x40/0x70
[   35.461698]  ? __switch_to_asm+0x34/0x70
[   35.461700]  ? __switch_to_asm+0x40/0x70
[   35.461701]  ? __switch_to_asm+0x34/0x70
[   35.461703]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461705]  ? __switch_to_asm+0x40/0x70
[   35.461707]  ? _cond_resched+0x10/0x33
[   35.461724]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461727]  async_run_entry_fn+0x2e/0xf5
[   35.461729]  process_one_work+0x15b/0x364
[   35.461731]  worker_thread+0x2c/0x3a0
[   35.461733]  ? process_one_work+0x364/0x364
[   35.461734]  kthread+0x10c/0x122
[   35.461736]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461738]  ret_from_fork+0x35/0x40
[   35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65
[   35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30
[   35.461757] CR2: 0000000000000010
[   35.461759] ---[ end trace 4fe1e63e2dd93374 ]---

Based on a patch by Fei Li.

v2: s/reverting/sticking/ (Chris)

Cc: stable@vger.kernel.org
Cc: Fei Li <fei.li@intel.com>
Co-developed-by: Fei Li <fei.li@intel.com>
Reported-by: Pavel Nakonechnyi <zorg1331@gmail.com>
Reported-and-tested-by: Seweryn Kokot <sewkokot@gmail.com>
Reported-and-tested-by: Laszlo Valko <valko@linux.karinthy.hu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-1-jani.nikula@intel.com

drm/i915: Split out functions for different kinds of workarounds

There are different kind of workarounds (those that modify registers that
live in the context image, those that modify global registers, those that
whitelist registers, etc...) and they have different requirements in terms
of where they are applied and how. Also, by splitting them apart, it should
be easier to decide where a new workaround should go.

v2:
  - Add multiple MISSING_CASE
  - Rebased

v3:
  - Rename mmio_workarounds to gt_workarounds (Chris, Mika)
  - Create empty placeholders for BDW and CHV GT WAs
  - Rebased

v4: Rebased

v5:
 - Rebased
 - FORCE_TO_NONPRIV register exists since BDW, so make a path
   for it to achieve universality, even if empty (Chris)

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: appease checkpatch]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-2-git-send-email-oscar.mateo@intel.com

drm/i915: Move a bunch of workaround-related code to its own file

This has grown to be a sizable amount of code, so move it to
its own file before we try to refactor anything. For the moment,
we are leaving behind the WA BB code and the WAs that get applied
(incorrectly) in init_clock_gating, but we will deal with it later.

v2: Use intel_ prefix for code that deals with the hardware (Chris)
v3: Rebased
v4:
  - Rebased
  - New license header
v5:
  - Rebased
  - Added some organisational notes to the file (Chris)
v6: Include DOC section in the documentation build (Jani)

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: appease checkpatch, mostly]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-1-git-send-email-oscar.mateo@intel.com

drm/i915/execlists: Set queue priority from secondary port

We can refine our current execlists->queue_priority if we inspect
ELSP[1] rather than the head of the unsubmitted queue. Currently, we use
the unsubmitted queue and say that if a subsequent request is more
important than the current queue, we will rerun the submission tasklet
to evaluate the need for preemption. However, we only want to preempt if
we need to jump ahead of a currently executing request in ELSP. The
second reason for running the submission tasklet is amalgamate requests
into the active context on ELSP[0] to avoid a stall when ELSP[0] drains.
(Though repeatedly amalgamating requests into the active context and
triggering many lite-restore is off question gain, the goal really is to
put a context into ELSP[1] to cover the interrupt.) So if instead of
looking at the head of the queue, we look at the context in ELSP[1] we
can answer both of the questions more accurately -- we don't need to
rerun the submission tasklet unless our new request is important enough
to feed into, at least, ELSP[1].

v2: Add some comments from the discussion with Tvrtko.
v3: More commentary to cross-reference queue_request()

References: f6322eddaff7 ("drm/i915/preemption: Allow preemption between submission ports")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411103929.27374-1-chris@chris-wilson.co.uk

drm/i915/bios: remove duplicated code

Apparently caused by a merge fail at some point. Due to the nature of
the duplicated block, the second one will have no effect, and there's no
need to backport.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410091248.1454-1-jani.nikula@intel.com

drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6

While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests
on some CI machines I have concluded that: a) the PMU readout of RC6 can
race against runtime PM transitions, and b) there are other reasons than
being runtime suspended which can cause intel_runtime_pm_get_if_in_use to
fail.

Therefore when estimating RC6 the code needs to assert we are indeed in
suspended state, and if not, the best we can do is return the last known
RC6 value.

Without this check we can calculate the estimated value based on un-
initialized or inappropriate internal state, which can result in over-
estimation, or in any case incorrect value being returned.

v2:
 * Re-arrange the code a bit to avoid second unlock and return branch.
   (Chris Wilson)

v3:
 * Insert some strategic blank lines and improve commit msg.
   (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410112704.24462-1-tvrtko.ursulin@linux.intel.com

drm/i915/guc: Replace %phn with %ph

%phn is not a valid specifier, and the trailing 'n' is being eaten by
the format-specifier and defaulting to the ' ' separator. Avoid angering
smatch by using the unknown specifier, and use the default we expect.

drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:669 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:679 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:693 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:707 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:727 ct_process_request() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:803 ct_handle_request() warn: '%ph' cannot be followed by 'n'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410111417.27563-1-chris@chris-wilson.co.uk

drm/i915: Don't fiddle with rps/rc6 across GPU reset

Resetting the GPU doesn't affect the RPS/RC6 state, so we can stop
forcibly reloading the registers.

Ville suggested this many moons ago, I said at that time that sanitizing
was no harm and meant that our bookkeeping was kept consistent with the
HW. However, in a forthcoming series, we want to split rps/rc6 GT
powermanagement and one of the key simplifications is the control of
when we enable it. Performing a crude sanitize in the middle of
i915_gem_reset() is then a huge wart.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410133354.13425-1-chris@chris-wilson.co.uk

drm/i915: Add debugfs file to clear FIFO underruns.

Adding a i915_fifo_underrun_reset debugfs file will make it possible
for IGT tests to clear FIFO underrun fallout at the start of each
subtest, and make re-enable FBC so tests always have maximum exposure
to features used by IGT. FIFO underruns and FBC bugs will no longer
hide when an earlier subtests disables both.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105685
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105681
Link: https://patchwork.freedesktop.org/patch/msgid/20180328100526.36467-1-maarten.lankhorst@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
[mlankhorst: Reset FBC reason if underrun had occurred. (vivijim)]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/psr: Chase psr.enabled only under the psr.lock

Inside the psr work function, we want to wait for PSR to idle first and
wish to do so without blocking the normal modeset path, so we do so
without holding the PSR lock. However, we first have to find which pipe
PSR was enabled on, which requires chasing into the PSR struct and
requires locking to prevent intel_psr_disable() from concurrently
setting our pointer to NULL.

Fixes: 995d30477496 ("drm/i915: VLV/CHV PSR Software timer mode")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Jose Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405114915.29609-1-chris@chris-wilson.co.uk

drm/i915/gen9_lp: Increase DDI PHY0 power well enabling timeout

On GLK sporadic timeouts occur during PHY0 enabling. Based on logs it looks
like they happen sometime after a system suspend/resume cycle, with the
same power well enabling succeeding both before and after the failed
one and no other problems observed. The current timeout in the code is
not actually specified by BSpec, so let's try to increase that until a
BSpec update.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409122716.4055-1-imre.deak@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Remove last references to drm_atomic_get_existing* macros

All the references to get_existing_state can be converted to
get_new_state or get_old_state, which means that i915 is now
get_existing_state free.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409124656.39886-3-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix alignment in prepare_plane_fb. (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Remove get_existing_crtc_state

get_existing_crtc_state is currently unused, get rid of it.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409124656.39886-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Change use get_new_plane_state instead of existing plane state

The get_existing macros are deprecated and should be replaced by
get_old/new_state for clarity.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409124656.39886-1-maarten.lankhorst@linux.intel.com
[mlankhorst: Remove useless warn. (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/execlists: Log fence context & seqno throughout GEM_TRACE

Include fence context and seqno in low level tracing so it is easier to
follow flows of individual requests when things go bad.

Also added tracing on the reset side of things.

v2:
 Chris Wilson:
 * Standardize global_seqno and seqno as global.
 * Include current hws seqno in execlists_cancel_port_requests.

v3:
 * Fix port printk format for all builds.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v2
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406123514.5809-1-tvrtko.ursulin@linux.intel.com

drm/i915: Enclose for_each_engine_masked macro arguments in parentheses

Enclose for_each_engine_masked macro arguments in parentheses.

v2:
 * Fixup whitespace to satisfy checkpatch.
 * Likewise reformat to 80 chars.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406114407.25360-1-tvrtko.ursulin@linux.intel.com

drm/i915: Upscale scaler max scale for NV12

This patch updates scaler max limit support for NV12

v2: Rebased (me)

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made
less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series

v6: Rebased (me)
Fixed review comments from Paauwe, Bob J
Previous version, where a split of calculation
was done, was wrong. Fixed that issue here.

v7: Rebased (me)

v8: Rebased (me)

v9: Rebased (me)

v10: Rebased (me)

v11: Addressed review comments from Shashank Sharma
Alignment issues fixed.
When call to skl_update_scaler is made, 0 was being
sent instead of pixel_format.
When crtc update scaler is called, we dont have the
fb to derive the pixel format. Added the function
parameter bool plane_scaler_check to account for this.

v12: Fixed failure in IGT debugfs_test.
fb is NULL in skl_update_scaler_plane
Due to this, accessing fb->format caused failure.
Patch checks fb before using.

v13: In the previous version there was a flaw.
In skl_update_scaler during plane_scaler_check
if the format was non-NV12, it would set need_scaling
to false. This could reset the previously set need_scaling
from a previous condition check. Patch fixes this.
Patch also adds minimum src height for YUV 420 formats
to 16 (as defined in BSpec) and adds for checking this
range.

v14: Addressed review comments from Maarten
Just add a check for NV12 min src height in
skl_update_scaler and retain the remaining checks
as is. Added Reviewed By from Juha-Pekka Heikkila.

v15: Rebased the series.

v16: Changed fb height restriction to be >= 16 as per
Bspec. Earlier it was > 16.

v17: Adding src width and height to be mult of 4 restriction
to avoid pipe fifo underruns for NV12.

Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-15-git-send-email-vidya.srinivas@intel.com

drm/i915: Update format_is_yuv() to include NV12

This patch adds NV12 to format_is_yuv() function
for sprite planes.

v2:
-Use intel_ prefix for format_is_yuv (Ville)

v3: Rebased (me)

v4: Rebased and addressed review comments from Clinton A Taylor.
"static function in intel_sprite.c is not available
to the primary plane functions".
Changed commit message - function modified for
sprite planes.

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

v7: Rebased (me)

v8: Rebased (me)

v9: Rebased (me)

v10: Changed intel_format_is_yuv function from
static to non-static. We need to use it later from
other files for check.

v11: Rebased the patch. format_is_yuv has already
been renamed to intel_format_is_yuv in the color
patch series which is already merged. This function
which was previously static has already been made
non-static. So this patch after rebase just adds
NV12 to intel_format_is_yuv function.

v12: Added reviewed by from Juha-Pekka Heikkila

v13/v14/v15: Rebased the series

Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-14-git-send-email-vidya.srinivas@intel.com

drm/i915: Set scaler mode for NV12

This patch sets appropriate scaler mode for NV12 format.
In this mode, skylake scaler does either chroma-upsampling or
chroma-upsampling and resolution scaling

v2: Review comments from Ville addressed
NV12 case to be checked first for setting
the scaler

v3: Rebased (me)

v4: Rebased (me)

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

v7: Rebased (me)

v8: Rebased (me)
Restricting the NV12 change for scaler to BXT and KBL
in this series.

v9: Rebased (me)

v10: As of now, NV12 has been tested on Gen9 and Gen10. However,
code is applicable to all GEN >= 9. Hence making
that change to keep it generic.
Comments under v8 is not valid anymore.

v11: Addressed review comments by Shashank Sharma.
For Gen10+, the scaler mode to be set it planar or normal
(single bit). Changed the code to be applicable to all
Gen.

v12: Addressed review comments from Shashank Sharma
For Gen9 (apart from GLK) bits 28:29 to be programmed
in PS_CTRL for NV12. For GLK and Gen10+, bit 29 to be set
for all Planar.

v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
Adding Reviewed by tag from Shashank Shamr

v14: Added reviewed by from Juha-Pekka Heikkila

v15: Rebased the series

Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-13-git-send-email-vidya.srinivas@intel.com

drm/i915: Enable YUV to RGB for Gen10 in Plane Ctrl Reg

If the fb format is YUV, enable the plane CSC mode bits
for the conversion.

v2: Addressed review comments from Shashank Sharma
Alignment issue fixed in i915_reg.h

v3: Adding Reviewed By from Shashank Sharma

v4: Rebased the patch. As part of rebasing, re-using
the color series defines which are already merged.
plane_state->base.color_encoding might not be set for
NV12. For now, just using PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709
in glk_plane_color_ctl if format is NV12.

v5: Added reviewed by from Juha-Pekka Heikkila

v6: Rebased the series

Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-12-git-send-email-vidya.srinivas@intel.com

drm/i915: Display WA 827

Display WA 827 applies to GEN9 (excluede GLK) and CNL.
Switching the plane format from NV12 to RGB and leaving system idle
results in display underrun and corruption.
WA: Set the bit 15 & bit 19 to 1b in the CLKGATE_DIS_PSL
register for the pipe in which NV12 plane is enabled.

v2: Addressed review comments from Maarten and
Juha-Pekka Heikkila. Added reviewed by from
Juha-Pekka Heikkila.

v3: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-11-git-send-email-vidya.srinivas@intel.com

drm/i915/skl: split skl_compute_ddb function

This patch splits skl_compute_wm/ddb functions into two parts.
One adds all affected pipes after the commit to atomic_state structure
and second part does compute the DDB.

v2: Added reviewed by tag from Shashank Sharma

v3: Added reviewed by from Juha-Pekka Heikkila

v4: Rebased the series

v5: Fixed checkpatch error. Changed *changed = true
to (*changed) = true;

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-10-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: nv12 workaround disable WM level 1-7

Display Workaround #0826 (SKL:ALL BXT:ALL) & #1059(CNL:A)
Hardware sometimes fails to wake memory from pkg C states fetching the
last few lines of planar YUV 420 (NV12) planes. This causes
intermittent underflow and corruption.
WA: Disable package C states or do not enable latency levels 1 through 7
(WM1 - WM7) on NV12 planes.

v2: Addressed review comments by Maarten.

v3: Adding reviewed by tag from Shashank Sharma

v4: Added reviewed by from Juha-Pekka Heikkila

v5: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-9-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: make sure higher latency level has higher wm value

DDB allocation optimization algorithm requires/assumes ddb allocation for
any memory C-state level DDB value to be as high as level below the
current level. Render decompression requires level WM to be as high as
wm level-0. This patch fulfils both the requirements.

v2: Changed plane_num to plane_id in skl_compute_wm_levels

v3: Addressed review comments from Shashank Sharma
Changed the commit message "statement can be more clear,
"DDB value to be as high as level below " what is level below ?"

v4: Added reviewed by tag from Shashank Sharma

v5: Added reviewed by from Juha-Pekka Heikkila

v6: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-8-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: pass skl_wm_level struct to wm compute func

This patch passes skl_wm_level structure itself to watermark
computation function skl_compute_plane_wm function (instead
of its internal parameters). It reduces number of arguments
required to be passed.

v2: Addressed review comments by Shashank Sharma

v3: Adding reviewed by tag from Shashank Sharma

v4: Added reviewed by from Juha-Pekka Heikkila

v5: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-7-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: NV12 related changes for WM

NV12 requires WM calculation for UV plane as well.
UV plane WM should also fulfill all the WM related restrictions.

v2: Addressed review comments from Shashank Sharma.

v3: Addressed review comments from Shashank Sharma
Changed plane_num to plane_id in skl_compute_plane_wm_params
and skl_compute_plane_wm.
Adding reviewed by tag from Shashank Sharma

v4: Added reviewed by from Juha-Pekka Heikkila

v5: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-6-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: support verification of DDB HW state for NV12

For YUV 420 Planar formats like NV12,
buffer allocation is done for Y and UV surfaces separately.
For NV12 plane formats, the UV buffer
allocation must be programmed in the Plane Buffer Config register
and the Y buffer allocation must be programmed in the
Plane NV12 Buffer Config register. Both register values
should be verified during verify_wm_state.

v2: Addressed review comments by Maarten.

v3: Addressed review comments by Shashank Sharma.

v4: Adding reviewed by tag from Shashank Sharma

v5: Added reviewed by from Juha-Pekka Heikkila

v6: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-5-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: add NV12 in skl_format_to_fourcc

Add support of recognizing DRM_FORMAT_NV12 from plane_format
register value.

v2: Added reviewed by tag from Mika Kahola

v3: Added reviewed by from Juha-Pekka Heikkila

v4: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-4-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: refactor WM calculation for NV12

Current code calculates DDB for planar formats in such a way that we
store DDB of plane-0 in plane 1 & vice-versa.
In order to make this clean this patch refactors WM/DDB calculation for
NV12 planar formats.

v2: Addressed review comments by Maarten

v3: Rebased and addressed review comments by Maarten

v4: Fixed a compilation issue of string replacement is_nv12 to
is_planar

v5: Added reviewed by from Juha-Pekka Heikkila

v6: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-3-git-send-email-vidya.srinivas@intel.com

drm/i915/skl+: rename skl_wm_values struct to skl_ddb_values

skl_wm_values struct contains values of pipe/plane DDB only.
so rename it for better readability of code. Similarly
skl_copy_wm_for_pipe copies DDB values.

s/skl_wm_values/skl_ddb_values
s/skl_copy_wm_for_pipe/skl_copy_ddb_for_pipe

Changes since V1:
 - also change name of skl_copy_wm_for_pipe

v2: Added reviewed by from Juha-Pekka Heikkila

v3: Rebased the series

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-2-git-send-email-vidya.srinivas@intel.com

drm/i915/dp: Send DPCD ON for MST before phy_up

When doing a modeset where the sink is transitioning from D3 to D0 , it
would sometimes be possible for the initial power_up_phy() to start
timing out. This would only be observed in the last action before the
sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We
originally thought this might be an issue with us accidentally shutting
off the aux block when putting the sink into D3, but since the DP spec
mandates that sinks must wake up within 1ms while we have 100ms to
respond to an ESI irq, this didn't really add up. Turns out that the
problem is more subtle then that:

It turns out that the timeout is from us not enabling DPMS on the MST
hub before actually trying to initiate sideband communications. This
would cause the first sideband communication (power_up_phy()), to start
timing out because the sink wasn't ready to respond. Afterwards, we
would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in
intel_ddi_pre_enable_dp(), which would actually result in waking up the
sink so that sideband requests would work again.

Since DPMS is what lets us actually bring the hub up into a state where
sideband communications become functional again, we just need to make
sure to enable DPMS on the display before attempting to perform sideband
communications.

Changes since v1:
- Remove comment above if (!intel_dp->is_mst) - vsryjala
- Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to
  keep enable/disable paths symmetrical
- Improve commit message - dhnkrn
Changes since v2:
- Only send DPMS off when we're disabling the last sink, and only send
  DPMS on when we're enabling the first sink - dhnkrn
Changes since v3:
- Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.")
Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com

drm/i915: Pass the set of guilty engines to i915_reset()

Currently, we rely on inspecting the hangcheck state from within the
i915_reset() routines to determine which engines were guilty of the
hang. This is problematic for cases where we want to run
i915_handle_error() and call i915_reset() independently of hangcheck.
Instead of relying on the indirect parameter passing, turn it into an
explicit parameter providing the set of stalled engines which then are
treated as guilty until proven innocent.

While we are removing the implicit stalled parameter, also make the
reason into an explicit parameter to i915_reset(). We still need a
back-channel for i915_handle_error() to hand over the task to the locked
waiter, but let's keep that its own channel rather than incriminate
another.

This leaves stalled/seqno as being private to hangcheck, with no more
nefarious snooping by reset, be it whole-device or per-engine. \o/

The only real issue now is that this makes it crystal clear that we
don't actually do any testing of hangcheck per se in
drv_selftest/live_hangcheck, merely of resets!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406220354.18911-2-chris@chris-wilson.co.uk

drm/i915: Treat i915_reset_engine() as guilty until proven innocent

If we are resetting just one engine, we know it has stalled. So we can
pass the stalled parameter directly to i915_gem_reset_engine(), which
alleviates the necessity to poke at the generic engine->hangcheck.stalled
magic variable, leaving that under control of hangcheck as its name
implies. Other than simplifying by removing the indirect parameter along
this path, this allows us to introduce new reset mechanisms that run
independently of hangcheck.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406220354.18911-1-chris@chris-wilson.co.uk

drm/i915: Split out parking from the idle worker for reuse

We will want to park GEM before disengaging the drive^W^W^W unwedging.
Since we already do the work for idling, expose the guts as a new
function that we can then reuse.

v2: Just skip if already parked; makes it more forgiving to use by
future callers.
v3: Extract mark_busy, rename it to i915_gem_unpark and place it next to
i915_gem_park so that we can evaluate it for symmetry more easily.
Calling GEM from inside i915_request looks to be a bit of a layering
violation, for the moment I am imaging them as being notify_cb.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406155144.27791-1-chris@chris-wilson.co.uk

drm/i915/selftests: Rename wait_for_hang() to wait_until_running()

Tvrtko mentioned that wait_for_hang() was confusing as it does not
actually wait for the aforementioned hang, just until the request is
running and we are *ready* to inject a hang. A quick
s/wait_for_hang/wait_until_running/ removes that confusion without
having to rethink the naming scheme, immediately at least.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406100950.19033-1-chris@chris-wilson.co.uk

drm/i915/icl: Enable RC6 and RPS in Gen11

AFAICT, once the new interrupt is in place, the rest should behave the
same as Gen10.

v2: Update ring frequencies (Sagar)
v3: Rebase.

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405140052.10682-5-mika.kuoppala@linux.intel.com

drm/i915/icl: Deal with GT INT DW correctly

BSpec says:

"Second level interrupt events are stored in the GT INT DW. GT INT DW is
a double buffered structure. A snapshot of events is taken when SW reads
GT INT DW. From the time of read to the time of SW completely clearing
GT INT DW (to indicate end of service), all incoming interrupts are logged
in a secondary storage structure. this guarantees that the record of
interrupts SW is servicing will not change while under service".

We read GT INT DW in several places now:

- The IRQ handler (banks 0 and 1) where, hopefully, it is completely
  cleared (operation now covered with the irq lock).
- The 'reset' interrupts functions for RPS and GuC logs, where we clear
  the bit we are interested in and leave the others for the normal
  interrupt handler.
- The 'enable' interrupts functions for RPS and GuC logs, as a measure
  of precaution. Here we could relax a bit and don't check GT INT DW
  at all or, if we do, at least we should clear the offending bit
  (which is what this patch does).

Note that, if every bit is cleared on reading GT INT DW, the register
won't be locked. Also note that, according to the BSpec, GT INT DW
cannot be cleared without first servicing the Selector & Shared IIR
registers.

v2:
  - Remove some code duplication (Tvrtko)
  - Make sure GT_INTR_DW are protected by the irq spinlock, since it's a
    global resource (Tvrtko)

v3: Optimize the spinlock (Tvrtko)

v4: Rebase.
v5:
  - take spinlock on outer scope to please sparse (Mika)
  - use raw_reg accessors (Mika)
v6: omit the continue in looping banks (Michel)

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v4)
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406093237.14548-1-mika.kuoppala@linux.intel.com

drm/i915/icl: Handle RPS interrupts correctly for Gen11

Using the new hierarchical interrupt infrastructure.

v2: Rebase
v3: Rebase
v4: use class/instance handler (Mika)

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405140052.10682-3-mika.kuoppala@linux.intel.com

drm/i915/icl: Use hw engine class, instance to find irq handler

Interrupt identity register we already read from hardware
contains engine class and instance fields. Leverage
these fields to find correct engine to handle the interrupt.

v3: rebase on top of rps intr
    use correct class / instance limits (Michel)
v4: split engine/other handling
v5: empty iir is not err (Daniele, Michel)

Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406093145.14389-1-mika.kuoppala@linux.intel.com

drm/i915/icl: Add reset control register changes

The bits used to reset the different engines/domains have changed in
GEN11, this patch maps the reset engine mask bits with the new bits
in the reset control register.

v2: Use shift-left instead of BIT macro to match the file style (Paulo).
v3: Reuse gen8_reset_engines (Daniele).
v4: Do not call intel_uncore_forcewake_reset after reset, we may be
using the forcewake to read protected registers elsewhere and those
results may be clobbered by the concurrent dropping of forcewake.

bspec: 19212
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405140052.10682-1-mika.kuoppala@linux.intel.com

drm/i915: Describe the bottom of stack in processing a batchbuffer

Now that "DOC: User command execution" of i915_gem_execbuffer.c is included
in the i915.rst, it is benecifial (for new developers) to read what happens
at the bottom of the driver stack (in terms of bytes written to be read
by the GPU) when processing a user-space batchbuffer.

v5:
  Typo correction of lacking double tick.

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[Joonas: correcting the patch title]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-4-git-send-email-kevin.rogovin@intel.com

drm/i915: Add link to documentation in i915_gem_execbuffer.c

Add the documentation of "DOC: User command execution" of
i915_gem_execbuffer.c into a new section in i915.rst.

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[Joonas: correcting the patch title]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-3-git-send-email-kevin.rogovin@intel.com

drm/i915: Narration overview on GEM

Add a narration to i915.rst about Intel GEN GPU's: engines,
driver context and relocation. Also do minor reorder to improve
narration.

v5:
  More type fixes.
  Flow bullet list so lines are not too long.

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[Joonas: correcting the patch title]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-2-git-send-email-kevin.rogovin@intel.com

drm/i915/selftests: Avoid repeatedly harming the same innocent context

We don't handle resetting the kernel context very well, or presumably any
context executing its breadcrumb commands in the ring as opposed to the
batchbuffer and flush. If we trigger a device reset twice in quick
succession while the kernel context is executing, we may end up skipping
the breadcrumb.  This is really only a problem for the selftest as
normally there is a large interlude between resets (hangcheck), or we
focus on resetting just one engine and so avoid repeatedly resetting
innocents.

Something to try would be a preempt-to-idle to quiesce the engine before
reset, so that innocent contexts would be spared the reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330131801.18327-1-chris@chris-wilson.co.uk

drm/i915/audio: Fix audio enumeration issue on BXT

On Apollolake, with stress test warm reboot, audio card was not getting
enumerated after reboot. This was a spurious issue happening on
Apollolake. HW codec and HD audio controller link was going out of sync
for which there was a fix in i915 driver but was not getting invoked for
BXT. Extending this fix to BXT as well.

Tested on apollolake chromebook by stress test warm reboot with 2500
iterations.

Bspec: 21829

Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522946544-11524-1-git-send-email-gaurav.k.singh@intel.com

drm/i915: Fix memory leak in intel_hdcp auth

Static code analysis tool reported memory leak in
intel_hdcp_auth_downstream. Fixing the memory leak.

v2: Rebase, move free to a cleanup label(Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404225957.7457-1-radhakrishna.sripada@intel.com

drm/i915: Only call finish_reset after a prepare_reset

If we skip the intel_prepare_reset(), we should also skip the
intel_display_reset(). If we we use a flag set by intel_prepare_reset()
then we do not have to second guess based on external user controlled
state whether or not the prepare was called before deciding to finish
it after the reset. igt/gem_eio is one such example that may tweak
i915.reset faster than the code is expecting, leading to

[  190.233528] =====================================
[  190.233534] WARNING: bad unlock balance detected!
[  190.233540] 4.16.0-rc7-g335ef9849310-drmtip_10+ #1 Tainted: G     U
[  190.233547] -------------------------------------
[  190.233553] gem_eio/1348 is trying to release lock (crtc_ww_class_acquire) at:
[  190.233569] [<ffffffff895c7810>] drm_modeset_acquire_fini+0x0/0x60
[  190.233575] but there are no more locks to release!
[  190.233580]
               other info that might help us debug this:
[  190.233588] 3 locks held by gem_eio/1348:
[  190.233592]  #0:  (&f->f_pos_lock){+.+.}, at: [<00000000ab90c784>] __fdget_pos+0x3a/0x50
[  190.233607]  #1:  (sb_writers#11){.+.+}, at: [<00000000e1529265>] vfs_write+0x188/0x1a0
[  190.233622]  #2:  (&attr->mutex){+.+.}, at: [<0000000011f40afe>] simple_attr_write+0x36/0xd0
[  190.233635]
               stack backtrace:
[  190.233644] CPU: 0 PID: 1348 Comm: gem_eio Tainted: G     U           4.16.0-rc7-g335ef9849310-drmtip_10+ #1
[  190.233655] Hardware name: Dell Inc.                 OptiPlex GX280               /0G8310, BIOS A04 02/09/2005
[  190.233664] Call Trace:
[  190.233674]  dump_stack+0x67/0x95
[  190.233682]  ? drm_modeset_backoff+0x1b0/0x1b0
[  190.233690]  print_unlock_imbalance_bug+0xd2/0xe0
[  190.233698]  ? drm_modeset_backoff+0x1b0/0x1b0
[  190.233704]  lock_release+0x23e/0x300
[  190.233712]  drm_modeset_acquire_fini+0x16/0x60
[  190.233835]  intel_finish_reset+0x72/0x160 [i915]
[  190.233894]  i915_reset_device+0x1e9/0x240 [i915]
[  190.233953]  ? __intel_get_crtc_scanline+0x1c0/0x1c0 [i915]
[  190.233962]  ? work_on_cpu_safe+0x50/0x50
[  190.234020]  i915_handle_error+0x1f2/0x470 [i915]
[  190.234031]  ? __might_fault+0x39/0x90
[  190.234037]  ? __might_fault+0x39/0x90
[  190.234099]  i915_wedged_set+0x7f/0xc0 [i915]
[  190.234107]  simple_attr_write+0xb0/0xd0
[  190.234117]  full_proxy_write+0x51/0x80
[  190.234125]  __vfs_write+0x21/0x140
[  190.234133]  ? rcu_read_lock_sched_held+0x6f/0x80
[  190.234140]  ? rcu_sync_lockdep_assert+0x29/0x50
[  190.234147]  ? __sb_start_write+0x152/0x1f0
[  190.234152]  ? __sb_start_write+0x168/0x1f0
[  190.234159]  vfs_write+0xbd/0x1a0
[  190.234166]  SyS_write+0x40/0xa0
[  190.234173]  ? do_syscall_64+0x19/0x1b0
[  190.234180]  do_syscall_64+0x6b/0x1b0
[  190.234188]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
[  190.234196] RIP: 0033:0x7f84c1b392b7
[  190.234201] RSP: 002b:00007f84b6755b00 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[  190.234211] RAX: ffffffffffffffda RBX: 0000000000000046 RCX: 00007f84c1b392b7
[  190.234218] RDX: 0000000000000002 RSI: 000055ec20abc8d6 RDI: 0000000000000046
[  190.234225] RBP: 000055ec20abc8d6 R08: 0000000000000000 R09: 0000000000000000
[  190.234231] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000002
[  190.234238] R13: 0000000000000000 R14: 00007f84b0000b20 R15: 000055ec20ce4eb8

Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405123714.3638-1-chris@chris-wilson.co.uk

drm/i915/selftests: Add basic sanitychecks for execlists

Before adding a new feature to execlists submission, we should endeavour
to cover the baseline behaviour with selftests. So start the ball
rolling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404093329.5383-1-chris@chris-wilson.co.uk

drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value

Along the eb_lookup_vmas() error path, the return value from
kmem_cache_alloc() was freed using kfree(). Fix it to use the proper
kmem_cache_free() instead.

Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Xidong Wang <wangxidong_97@163.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404093824.9313-1-chris@chris-wilson.co.uk

drm/i915: Check hdcp key loadability

HDCP1.4 key can be loaded, only when Power well #1 is enabled and cdclk
is enabled. Using the I915 power well infrastruture, above requirement
is verified.

This patch enables the hdcp initialization for HSW, BDW, and BXT.

v2:
  Choose the PW# based on the platform.
v3:
  No Changes.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522663834-24482-4-git-send-email-ramalingam.c@intel.com

drm/i915: Read Vprime thrice incase of mismatch

In case of V prime mismatch, DP HDCP spec mandates the re-read of
Vprime atleast twice.

This patch needed for DP HDCP1.4 CTS Test: 1B-05.

v2:
  Moved the V' validation into a function for retry. [Sean Paul]
v3:
  Removed Inline keyword and DRM_DEBUG_KMS are used [Sean Paul]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522663834-24482-3-git-send-email-ramalingam.c@intel.com

drm/i915: Read HDCP R0 thrice in case of mismatch

As per DP spec when R0 mismatch is detected, HDCP source supported
re-read the R0 atleast twice.

And For HDMI and DP minimum wait required for the R0 availability is
100mSec. So this patch changes the wait time to 100mSec but retries
twice with the time interval of 100mSec for each attempt.

This patch is needed for DP HDCP1.4 CTS Test: 1A-06.

v2:
  No Change
v3:
  Comment on R0 retry is moved closer to the code[Seanpaul]
v4:
  Removing unwanted noise introduced in v3.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522669822-2508-1-git-send-email-ramalingam.c@intel.com

drm/i915: Store preemption capability in engine->flags

Let's avoid having to delve down the pointer chain to see if the i915
device has support for preemption and store that on the engine, which
made the decision in the first place!

v2: Refactor common preemption policy between execlists/guc.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403183537.5522-1-chris@chris-wilson.co.uk

drm/i915/execlists: Track begin/end of execlists submission sequences

We would like to start doing some bookkeeping at the beginning, between
contexts and at the end of execlists submission. We already mark the
beginning and end using EXECLISTS_ACTIVE_USER, to provide an indication
when the HW is idle. This give us a pair of sequence points we can then
expand on for further bookkeeping.

v2: Refactor guc submission to share the same begin/end.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180331130626.10712-1-chris@chris-wilson.co.uk

Merge airlied/drm-next into drm-intel-next-queued

Commit 'aee3bac0a3a8 ("drm/i915/psr: Tie PSR2 support to Y
coordinate requirement")' got merged to drm-intel-next-queued
but the variable was defined commit 'c5fe47327b06 ("drm: Add PSR
version 3 macro") who was merged through drm-misc.

So backmerging to get drm-intel-next-queued compiling back again.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/psr: Set DPCD PSR2 enable bit when needed

In the 2 eDP1.4a pannels tested set or not set bit have no effect
but is better set it and comply with specification.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-9-jose.souza@intel.com

drm/i915/psr: Cache sink synchronization latency

This value do not change overtime so better cache it than
fetch it every PSR enable.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-8-jose.souza@intel.com

drm/i915/psr: Use PSR2 macro for PSR2

Cosmetic change.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-7-jose.souza@intel.com

drm/i915/psr: Do not override PSR2 sink support

Sink can support our PSR2 requirements but userspace can request
a resolution that PSR2 hardware do not support, in this case it
was overwritten the PSR2 sink support.
Adding another flag here, this way if requested resolution changed
to a value that PSR2 hardware can handle, PSR2 can be enabled.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-6-jose.souza@intel.com

drm/i915/psr/cnl: Enable Y-coordinate support in source

For Geminilake and Cannonlake+ the Y-coordinate support must be
enabled in PSR2_CTL too.

Spec: 7713 and 7720

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-5-jose.souza@intel.com

drm/i915/psr: Tie PSR2 support to Y coordinate requirement

Although i915 don't implement aux sync frame through tests was
findout that pannels can do selective update when the y-coordinate
is also included in SDP, that is why it is required to run PSR2 in
i915.

So moving to only one place the sink requirements that the actual
driver needs to enable PSR2.

Also intel_psr2_config_valid() is called every time the crtc config
is computed, wasting some time every time it was checking for
Y coordinate requirement.

This allow us to nuke y_cord_support and some of VSC setup code that
was handling a scenario that would never happen(PSR2 without Y
coordinate).

Also here renaming intel_dp_get_y_cord_status() to
intel_dp_get_y_coord_required() as it more accurate to the name and
function of bit according to eDP spec.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-4-jose.souza@intel.com

drm/i915/psr: Nuke aux frame sync

eDP spec states that aux frame is required to do PSR2 selective
update but i915 don't fully implement it. It sends the aux frame
sync messages but the value is always zero as the GTC is not enabled
in driver.

Through tests was findout that pannels can do selective update when
the y-coordinate is also included in SDP, that is why it is required
to run PSR2 in i915.

A dummy value is not useful at all to sink, so removing everything
related to aux frame sync, if GTC is enabled we can bring this back.

Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-3-jose.souza@intel.com

drm: Add DP last received PSR SDP VSC register and bits

This is a register to help debug what is in the last SDP VSC
packet revived by sink.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-2-jose.souza@intel.com

drm: Add DP PSR2 sink enable bit

To comply with eDP1.4a this bit should be set when enabling PSR2.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-1-jose.souza@intel.com

drm/i915: Only warn for might_sleep() before a slow wait_for_register

As intel_wait_for_register_fw() may use, and if successful only use, a
busy-wait loop, the might_sleep() warning is a little over-zealous.
Restrict it to a might_sleep_if() a slow timeout is specified (and so
the caller authorises use of a usleep).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329224519.13598-2-chris@chris-wilson.co.uk

drm/i915: Avoid sleeping inside per-engine reset

Only sleep and repeat when asked for a full device reset (ALL_ENGINES)
and avoid using sleeping waits when asked for a per-engine reset. The
goal is to be able to use a per-engine reset from hardirq/softirq/timer
context. A consequence is that our individual wait timeouts are a
thousand times shorter, on the order of a hundred microseconds rather
than hundreds of millisecond. This may make hitting the timeouts more
common, but hopefully the fallover to the full-device reset will be
sufficient to pick up the pieces.

Note, that the sleeps inside older gen (pre-gen8) have been left as they
are only used in full device reset mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329224519.13598-1-chris@chris-wilson.co.uk

drm/i915/perf: add more debug message on perf open & configs

This will make it easier to spot issues related to config
creation/usage.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-9-lionel.g.landwerlin@intel.com

drm/i915: rename PPGTT/GGTT fields OA registers

We had a generic field name used across 2 registers but it feels like
it's clearer we make it obvious what register this field belongs to.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-7-lionel.g.landwerlin@intel.com

drm/i915/perf: remove empty line

This was added by mistake in commit 28964cf25ee67 ("drm/i915/perf:
disable NOA logic when not used").

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-6-lionel.g.landwerlin@intel.com

drm/i915/perf: simplify OA unit enabling on gen7

In commit d79651522e89c ("drm/i915: Enable i915 perf stream for
Haswell OA unit") the enable/disable vfunc hadn't appear yet and the
same function would deal with enabling/disabling the OA unit.

This was split later on for gen8 but the gen7 retained some code that
isn't actually useful anymore.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-4-lionel.g.landwerlin@intel.com

drm/i915/perf: check the value of PROP_SAMPLE_OA uapi parameter

We've been a bit loose about this opening parameter. We should only
add the flag for writing OA reports when the value of this parameter
is != 0.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-3-lionel.g.landwerlin@intel.com

drm/i915/perf: enable perf support on ICL

No significant changes from either context offsets, nor report
formats, nor register whitelist.

v2: Also drop slice/unslice clock ratio changes (Matt)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326133949.12469-3-lionel.g.landwerlin@intel.com

drm/i915: Include the HW breadcrumb whenever we trace the global_seqno

When we include a request's global_seqno in a GEM_TRACE it often helps
to know how that relates to the current breadcrumb as seen by the
hardware.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327210157.16896-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/guc: enable guc interrupts unconditionally in uc_resume

Probably lost while rebasing commit eacd8391f977 ("drm/i915/guc: Keep GuC
interrupts enabled when using GuC").

Not really needed since i915_gem_init_hw is called before uc_resume, but
it brings symmetry to uc_suspend.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328205851.16188-1-michel.thierry@intel.com

Merge branch 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Mask mode type garbage from userspace (Ville)

Something went wrong on the misc tree side, but I'll pull the patch directly.

* 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Fix uabi regression by allowing garbage mode->type from userspace

drm/i915/guc: Trace messages from CT while in debug

During debug we may want to investigate all communication
from the Guc. Add proper tracing macros in debug config.

v2: convert remaining DRM_DEBUG into new CT_DEBUG (Michal)
v3: use dedicated Kconfig (Daniele)
v4: checkpatch

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-12-michal.wajdeczko@intel.com

drm/i915/guc: Handle default action received over CT

When running on platform with CTB based GuC communication enabled,
GuC to Host event data will be delivered as CT request message.
However, content of the data[1] of this CT message follows format
of the scratch register used in MMIO based communication, so some
code reuse is still possible.

v2:  filter disabled messages (Daniele)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327214124.70680-1-michal.wajdeczko@intel.com

drm/i915/guc: Prepare to process incoming requests from CT

Requests are read from CT in the irq handler, but actual processing
will be done in the work thread. Processing of specific actions will
be added in the upcoming patches.

v2: don't use GEM_BUG_ON (Chris)
    don't kmalloc too large buffer (Michal)
v3: rebased
v4: don't name it 'dispatch' (Michel) and fix checkpatch
    add some documentation (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-10-michal.wajdeczko@intel.com

drm/i915/guc: Implement response handling in send_ct()

Instead of returning small data in response status dword,
GuC may append longer data as response message payload.
If caller provides response buffer, we will copy received
data and use number of received data dwords as new success
return value. We will WARN if response from GuC does not
match caller expectation.

v2: fix timeout and checkpatch warnings (Michal)
v3: fix checkpatch again (Michel)
    update wait function name (Michal)
    no need for spinlock_irqsave (MichalWi)
    no magic numbers (MichalWi)
    must check before use (Jani)
    add some more documentation (Michal)
v4: update documentation (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #2.5
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327121439.70096-1-michal.wajdeczko@intel.com

drm/i915/guc: Use better name for helper wait function

In next patch we will introduce another way of waiting for the response
that will use RECV buffer. To avoid misleading names, rename old wait
function to reflect the fact that it is based on descriptor update.

v2: fix comment style (Michal)
v3: use more specific name (Michel)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-8-michal.wajdeczko@intel.com

drm/i915/guc: Prepare to handle messages from CT RECV buffer

GuC can respond to our commands not only by updating SEND buffer
descriptor, but can also send a response message over RECV buffer.
Guc can also send unsolicited request messages over RECV buffer.
Let's start reading those messages and make placeholders
for actual response/request handlers.

v2: misc improvements (Michal)
v3: change response detection (Michal)
    invalid status is protocol error (Michal)
v4: rebase
v5: fix checkpatch (Michel)
    don't use fields before check (Jani)
    add some documentation (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> # 4.5
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-7-michal.wajdeczko@intel.com

drm/i915/guc: Make event handler a virtual function

On platforms with CTB based GuC communications, we will handle
GuC events in a different way. Let's make event handler a virtual
function to allow easy switch between those variants.

Credits-to: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-6-michal.wajdeczko@intel.com

drm/i915/guc: Implement response handling in send_mmio()

We're using data encoded in the status MMIO as return value from send
function, but GuC may also write more data in remaining MMIO regs.
Let's copy content of these registers to the buffer provided by caller.

v2: new line (Michel)
v3: updated commit message

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-5-michal.wajdeczko@intel.com

drm/i915/guc: Prepare send() function to accept bigger response

This is a preparation step for the upcoming patches.
We already can return some small data decoded from the command
status, but we will need more in the future.

v2: add explicit response buf size
v3: squash with helper patch

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-4-michal.wajdeczko@intel.com

drm/i915/guc: Add support for data reporting in GuC responses

GuC may return additional data in the response message.
Format and meaning of this data is action specific. We will
use this non-negative data as a new success return value.
Currently used actions don't return data that way yet.

v2: fix prohibited space after '~' (Michel)
    update commit message (Daniele)
v3: rebase

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-3-michal.wajdeczko@intel.com

drm/i915/guc: Add documentation for MMIO based communication

As we are going to extend our use of MMIO based communication,
try to explain its mechanics and update corresponding definitions.

v2: fix checkpatch MACRO_ARG_REUSE

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-2-michal.wajdeczko@intel.com

drm/i915/execlists: Reset ring registers on rebinding contexts

Tvrtko uncovered a fun issue with recovering from a wedge device. In his
tests, he wedged the driver by injecting an unrecoverable hang whilst a
batch was spinning. As we reset the gpu in the middle of the spinner,
when resumed it would continue on from the next instruction in the ring
and write it's breadcrumb. However, on wedging we updated our
bookkeeping to indicate that the GPU had completed executing and would
restart from after the breadcrumb; so the emission of the stale
breadcrumb from before the reset came as a bit of a surprise.

A simple fix is to when rebinding the context into the GPU, we update
the ring register state in the context image to match our bookkeeping.
We already have to update the RING_START and RING_TAIL, so updating
RING_HEAD as well is trivial. This works because whenever we unbind the
context, we keep the bookkeeping in check; and on wedging we unbind all
contexts.

Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327210136.16750-1-chris@chris-wilson.co.uk
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/gen11: add support for reading the timestamp frequency

The only thing that differs here is that the crystal clock freq now
has four possible values.

This patch gets rid of the "Unknown gen, unable to compute..." message
at boot for gen11.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109232835.11478-18-paulo.r.zanoni@intel.com

drm/i915: Use correct reST syntax for WOPCM and GuC kernel-doc diagrams

GuC Address Space and WOPCM Layout diagrams won't be generated correctly by
sphinx build if not using proper reST syntax.

This patch uses reST literal blocks to make sure GuC Address Space and
WOPCM Layout diagrams to be generated correctly, and it also corrects some
errors in the diagram description.

v2:
 - Fixed errors in diagram description

v3:
 - Updated GuC Address Space kernel-doc based on Michal's suggestion

v4:
 - Added WOPCM layout and GuC address space docs into i915.rst (Joonas)

Signed-off-by: Jackie Li <yaodong.li@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521763162-11424-1-git-send-email-yaodong.li@intel.com

Merge tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux into drm-next

- GPUVM support for dGPUs
- KFD events support for dGPUs
- Fix live-lock situation when restoring multiple evicted processes
- Fix VM page table allocation on large-bar systems
- Fix for build failure on frv architecture

* tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Use ordered workqueue to restore processes
  drm/amdgpu: Fix acquiring VM on large-BAR systems
  drm/amdkfd: Add module option for testing large-BAR functionality
  drm/amdkfd: Kmap event page for dGPUs
  drm/amdkfd: Add ioctls for GPUVM memory management
  drm/amdkfd: Add TC flush on VMID deallocation for Hawaii
  drm/amdkfd: Allocate CWSR trap handler memory for dGPUs
  drm/amdkfd: Add per-process IDR for buffer handles
  drm/amdkfd: Aperture setup for dGPUs
  drm/amdkfd: Remove limit on number of GPUs
  drm/amdkfd: Populate DRM render device minor
  drm/amdkfd: Create KFD VMs on demand
  drm/amdgpu: Add kfd2kgd interface to acquire an existing VM
  drm/amdgpu: Add helper to turn an existing VM into a compute VM
  drm/amdgpu: Fix initial validation of PD BO for KFD VMs
  drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm
  drm/amdkfd: fix uninitialized variable use
  drm/amdkfd: add missing include of mm.h

Merge tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Display fixes for booting with MST hub lid closed and display
  freezing after hibernation (fd.o bugs 105470 & 105196)
- Fix for a very rare interrupt handling race resulting in GPU hang

* tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Fix hibernation with ACPI S0 target state
  drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.

Backmerge tag 'v4.16-rc7' into drm-next

Linux 4.16-rc7

This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.

drm/i915: reorder dpll_info members

Remove 4-bytes hole in this struct an reorder tables accordingly. This
also changes the last element of the tables to be more future-proof.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-8-lucas.demarchi@intel.com