staging: rtl8821ae: fix sparse warning for static declarations

This commit fixes the following sparse warnings in ps.c:
  - 702: warning: symbol 'rtl_p2p_noa_ie' was not declared. Should it be static?
  - 802: warning: symbol 'rtl_p2p_action_ie' was not declared. Should it be static?

Signed-off-by: Marcus Farkas <marcus.farkas@finitebox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: replace kmalloc(..., sizeof(T))

As suggested by Andy Shevchenko on driverdev-devel, replace
v = ... sizeof(struct type_of_v) -> sizeof(*v)

Based on a cocci patch along the lines of

@@
type T;
expression E;
identifier V;
@@

T *V;
...
- V = kmalloc(sizeof(T), E);
+ V = kmalloc(sizeof(*V), E);

@@
type T;
expression E;
identifier V;
@@

T *V;
...
- V = kzalloc(sizeof(T), E);
+ V = kzalloc(sizeof(*V), E);

Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_ioctl_linux.c: Cleaning up useless if statement

The same code regardless of the outcome of the if statement.
And clean up another duplicate line of code.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712, rtl8712: avoid lots of build warnings

The rtl8712 driver has an 'extern inline' function that contains an
'if', which causes lots of warnings with CONFIG_PROFILE_ALL_BRANCHES
overriding the definition of 'if':

drivers/staging/rtl8712/ieee80211.h:759:229: warning: '______f' is static but declared in inline function 'ieee80211_get_hdrlen' which is not static [enabled by default]

This changes the driver to use 'static inline' instead, which happens
to be the correct annotation anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove useless variable 'fw_found'

The net device only exists when firmware is loaded successfully.
Firmware presence variable is only used through r871xu_dev_remove() and
this function already checks for net device existence.

Signed-off-by: Thomas Vegas <thomas@grouk.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Fix oops on dongle removal if firmware is not available

When firmware is not available, net device is not created. Upon
disconnect, we must check for net device existence before trying to
release net device private data.

Signed-off-by: Thomas Vegas <thomas@grouk.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: coding style: use C89 comments

fix coding style: use C89 comments, not C99

Signed-off-by: Merlin Chlosta <eudyptula@merlin.geekmail.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unnecessary typedef struct.

Remove a totally unnecessary typedef and rename it to lowercase.
This is more readable now.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace C99 style comments

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix sparse warning for static declarations

This patch fixes the following sparse warnings:

iwctl.c:76:22: warning: symbol 'iwctl_get_wireless_stats' was not declared. Should it be static?
iwctl.c:118:5: warning: symbol 'iwctl_giwname' was not declared. Should it be static?
iwctl.c:131:5: warning: symbol 'iwctl_siwscan' was not declared. Should it be static?
iwctl.c:192:5: warning: symbol 'iwctl_giwscan' was not declared. Should it be static?
iwctl.c:344:5: warning: symbol 'iwctl_siwfreq' was not declared. Should it be static?
iwctl.c:390:5: warning: symbol 'iwctl_giwfreq' was not declared. Should it be static?
iwctl.c:420:5: warning: symbol 'iwctl_siwmode' was not declared. Should it be static?
iwctl.c:486:5: warning: symbol 'iwctl_giwmode' was not declared. Should it be static?
iwctl.c:520:5: warning: symbol 'iwctl_giwrange' was not declared. Should it be static?
iwctl.c:626:5: warning: symbol 'iwctl_siwap' was not declared. Should it be static?
iwctl.c:684:5: warning: symbol 'iwctl_giwap' was not declared. Should it be static?
iwctl.c:711:5: warning: symbol 'iwctl_giwaplist' was not declared. Should it be static?
iwctl.c:784:5: warning: symbol 'iwctl_siwessid' was not declared. Should it be static?
iwctl.c:893:5: warning: symbol 'iwctl_giwessid' was not declared. Should it be static?
iwctl.c:923:5: warning: symbol 'iwctl_siwrate' was not declared. Should it be static?
iwctl.c:1004:5: warning: symbol 'iwctl_giwrate' was not declared. Should it be static?
iwctl.c:1049:5: warning: symbol 'iwctl_siwrts' was not declared. Should it be static?
iwctl.c:1077:5: warning: symbol 'iwctl_giwrts' was not declared. Should it be static?
iwctl.c:1096:5: warning: symbol 'iwctl_siwfrag' was not declared. Should it be static?
iwctl.c:1123:5: warning: symbol 'iwctl_giwfrag' was not declared. Should it be static?
iwctl.c:1141:5: warning: symbol 'iwctl_siwretry' was not declared. Should it be static?
iwctl.c:1176:5: warning: symbol 'iwctl_giwretry' was not declared. Should it be static?
iwctl.c:1205:5: warning: symbol 'iwctl_siwencode' was not declared. Should it be static?
iwctl.c:1336:5: warning: symbol 'iwctl_giwencode' was not declared. Should it be static?
iwctl.c:1398:5: warning: symbol 'iwctl_siwpower' was not declared. Should it be static?
iwctl.c:1448:5: warning: symbol 'iwctl_giwpower' was not declared. Should it be static?
iwctl.c:1478:5: warning: symbol 'iwctl_giwsens' was not declared. Should it be static?
iwctl.c:1502:5: warning: symbol 'iwctl_siwauth' was not declared. Should it be static?
iwctl.c:1603:5: warning: symbol 'iwctl_giwauth' was not declared. Should it be static?
iwctl.c:1611:5: warning: symbol 'iwctl_siwgenie' was not declared. Should it be static?
iwctl.c:1644:5: warning: symbol 'iwctl_giwgenie' was not declared. Should it be static?
iwctl.c:1669:5: warning: symbol 'iwctl_siwencodeext' was not declared. Should it be static?
iwctl.c:1783:5: warning: symbol 'iwctl_giwencodeext' was not declared. Should it be static?
iwctl.c:1791:5: warning: symbol 'iwctl_siwmlme' was not declared. Should it be static?
iwctl.c:1900:21: warning: symbol 'iwctl_private_args' was not declared. Should it be static?
iwctl.c:1906:33: warning: symbol 'iwctl_handler_def' was not declared. Should it be static?

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: update iwctl_private_args extern declaration

Update declaration of iwctl_private_args to match definition in iwctl.c

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: update out-of-date function declaration

The function iwctl_siwscan() is defined in iwctl.c as:
int iwctl_siwscan(struct net_device *dev,
  struct iw_request_info *info,
  struct iw_point *wrq,
  char *extra)
{
  ...

This patch updates iwctl.h so that the type of the 3rd parameter (*wqr) in the
function declaration matches the definition.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix sparse warning for static declarations

This patch fixes the following sparse warnings:

dpc.c:65:21: warning: symbol 'acbyRxRate' was not declared. Should it be static?
dpc.c:272:9: warning: symbol 'MngWorkItem' was not declared. Should it be static?
dpc.c:288:1: warning: symbol 'device_receive_frame' was not declared. Should it be static?

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix sparse warning "cast removes address space of expression"

Add missing __user macro to second parameter of ethtool_ioctl().
This removes the need for the offending (void *) cast of the user space pointer
rq->ifr_data.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Added blank lines after declarations in gdm_lte.c

This patch fixes following checkpatch.pl warning:
WARNING: Missing a blank line after declarations in gdm_lte.c

Signed-off-by: Scott Weir <sjw0410@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename BBuGetFrameTime to vnt_get_frame_time

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename BBvCalculateParameter to vnt_get_phy_field

The function returns the phy fields rename to vnt_get_phy_field

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename FIRMWAREbCheckVersion to vnt_check_firmware_version

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename FIRMWAREbBrach2Sram to vnt_firmware_branch_to_sram

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename FIRMWAREbDownload to vnt_download_firmware

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: firmware.c replace DBG_PRT debug messages

Replace with dev_dbg

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: FIRMWAREbCheckVersion remove camel case

camel case changes
pDevice -> priv
ntStatus -> status

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: FIRMWAREbBrach2Sram remove camel case

camel case changes
pDevice -> priv
NdisStatus -> status

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: FIRMWAREbDownload remove camel case

camel case changes
pDevice -> priv
NdisStatus -> status
pBuffer -> buffer
wLength -> length

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename PSbIsNextTBTTWakeUp to vnt_next_tbtt_wakeup

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename PSvDisablePowerSaving to vnt_disable_power_saving

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename PSvEnablePowerSaving to vnt_enable_power_saving

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: PSbIsNextTBTTWakeUp remove camel case

camel case changes
pDevice -> priv
pMgmt -> mgmt
bWakeup -> wake_up

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: PSvDisablePowerSaving remove camel case

pDevice -> priv

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: PSvEnablePowerSaving remove camel case

camel case changes
pDevice -> priv
wListenInterval -> listen_interval
pMgmt -> mgmt
wAID -> aid

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rxtx replace adwTxKey[4]

Replace with tx_key with size of WLAN_KEY_LEN_CCMP(16)

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rxtx s_vFillTxKey use vnt_usb_send_context

Use struct vnt_usb_send_context to get mac header and
priv pointers

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rxtx add mac header to vnt_tx_datahead_* structures

Add vnt_mac_hdr_pos to set mac header pointer and the calculate header size.

Pass ieee80211 hdr pointer and tx_hdr_size in vnt_usb_send_context.

Remove old pointer arithmetic and attach pMACHeader to hdr.

cbHeaderLength/cbHeaderSize now uses the value of tx_hdr_size.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rxtx move vnt_usb_send_context into tx structure.

Replacing struct vnt_private.

Where struct vnt_private is needed pointer to priv is added.

This allows to move tx signaling into vnt_usb_send_context.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvWriteBeaconInterval to vnt_mac_set_beacon_interval

Drop write for set

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvDisableBarkerPreambleMd to vnt_mac_disable_barker_preamble_mode

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvEnableBarkerPreambleMd to vnt_mac_enable_barker_preamble_mode

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvDisableProtectMD to vnt_mac_disable_protect_mode

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvEnableProtectMD to vnt_mac_enable_protect_mode

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvWriteBSSIDAddress to vnt_mac_set_bssid_addr

drop write for set and shorten address.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvWriteWord to vnt_mac_write_word

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvRegBitsOff to vnt_mac_reg_bits_off

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvRegBitsOff to vnt_mac_reg_bits_off

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvSetKeyEntry to vnt_mac_set_keyentry

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvDisableKeyEntry to vnt_mac_disable_keyentry

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvSetBBType to vnt_mac_set_bb_type

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACbShutdown to vnt_mac_shutdown

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename MACvWriteMultiAddr to vnt_mac_set_filter

The function sets the mac filter so rename to vnt_mac_set_filter

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDvSetBSSMode to vnt_set_bss_mode

drop card and rename to vnt_set_bss_mode

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbRadioPowerOn to vnt_radio_power_on

Drop card and rename to vnt_radio_power_on

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbRadioPowerOff to vnt_radio_power_off

Drop card and rename to vnt_radio_power_off

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDvUpdateNextTBTT to vnt_update_next_tbtt

Drop card and rename to vnt_update_next_tbtt

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDvSetFirstNextTBTT to vnt_reset_next_tbtt

Drop card, set and first. The device resets the next tbtt rename
to vnt_reset_next_tbtt

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDqGetNextTBTT to vnt_get_next_tbtt

Drop card and rename to vnt_get_next_tbtt

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbClearCurrentTSF to vnt_clear_current_tsf

Drop card and rename to vnt_clear_current_tsf

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbGetCurrentTSF to vnt_get_current_tsf

Drop card and rename to vnt_get_current_tsf

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDvAdjustTSF to vnt_adjust_tsf

drop card and rename to vnt_adjust_tsf

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDqGetTSFOffset to vnt_get_tsf_offset

drop card and rename to vnt_get_tsf_offset

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbyGetPktType to vnt_get_pkt_type

drop card rename to vnt_get_pkt_type

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbIsOFDMinBasicRate to vnt_ofdm_min_rate

drop card and basic rename to vnt_ofdm_min_rate

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbAddBasicRate to vnt_add_basic_rate

Drop card and rename to vnt_add_basic_rate

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDvSetRSPINF to vnt_set_rspinf

Drop card and rename to vnt_set_rspinf

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDvUpdateBasicTopRate to vnt_update_top_rates

Drop card basic. The function updates the top rates vnt_update_top_rates

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename vUpdateIFS to vnt_update_ifs

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDvCalculateOFDMRParameter to vnt_calculate_ofdm_rate

Drop card and Parameter. R is the rate to rename to vnt_calculate_ofdm_rate

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename swGetOFDMControlRate to vnt_get_ofdm_rate

Drop control and rename vnt_get_ofdm_rate

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename swGetCCKControlRate to vnt_get_cck_rate

Drop control and just use vnt_get_cck_rate.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename CARDbSetMediaChannel to vnt_set_channel

Drop card and media and just use vnt_set_channel.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: ion_chunk_heap.c: Fix checkpatch warning

Fix the over 80 character line

Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nokia_h4: nokia_core.c Fixed coding style

Inserted a blank line after a declaration.

Signed-off-by: Miguel Oliveira <cmroliv@gmail.com>
Acked-by: Pavel Machek <Pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: optimize struct ion_system_heap

struct ion_system_heap has an array for storing pointers to page pools
and it is allocated separately from the containing structure. There is
no point in allocating those two small objects individually, bothering
slab allocator. Using a variable length array simplifies code lines and
reduces overhead to the slab.

Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Reviewed-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: remove order argument from free_buffer_page()

Now that the pages returned from the pool are compound pages, we do not
need to pass the order information to free_buffer_page().

Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Reviewed-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: remove struct page_info

ION system heap creates a temporary list of pages to build
scatter/gather table, introducing an internal data type, page_info. Now
that the order field has been removed from it, we do not need to depend
on such data type anymore.

Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Reviewed-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: remove order from struct page_info

ION system heap uses an internal data structure, struct page_info, for
tracking down the meta information of the pages allocated from the pool.
Now that the pool returns compound pages, we don't need to store page
order in struct page_info.

Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Reviewed-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove file rtw_br_ext.h

driver doesn't need rtw_br_ext.h any more.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused members of struct adapter

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove file rtw_br_ext.c

functions defined in rtw_br_ext.c are not being used by driver anymore.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function netdev_br_init()

netdev_br_init() tries to find MAC address of network interface named "br0",
then that MAC address is assigned to adapter->br_netdev and used by driver's
NAT implementation code.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function nat25_db_expire()

We've removed the code which was responsible for building NAT table,
so no use of keeping nat_db_expire().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove pppoe_connection_in_progress from struct adapter

Value stored in pppoe_connection_in_progress isn't being
used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function nat25_db_cleanup()

We've removed the code which was responsible for building NAT table,
so no use of keeping nat_db_cleanup().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused functons defined in rtw_br_ext.c

This patch removes some functions defined in rtw_br_ext.c, which have become
obsolete after removal of rtw_br_client_tx().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_br_client_tx()

rtw_br_client_tx() pass tx packet to functions responsible for
building NAT table.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove empty files rtw_io.[c,h]

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Move usb_[read, write]() declarations to usb_ops_linux.h

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_io.h: Remove unused structures and macros

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: usb_ops_linux.h: Remove unused function declarations

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove functions initialize rtw_[read,write] wrapper

we have removed all rtw_[read,write]() function calls,
so no need to initialize structures used to build rtw_[read,write]
abstraction.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_read8()

_rtw_read8() is a wrapper function, being used to call usb_read8().
Call usb_read8() directly and drop _rtw_read8().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_read16()

_rtw_read16() is a wrapper function, being used to call usb_read16().
Call usb_read16() directly and drop _rtw_read16().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_read32()

_rtw_read32() is a wrapper function, being used to call usb_read32().
Call usb_read32() directly and drop _rtw_read32().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_write8()

_rtw_write8() is a wrapper function, being used to call usb_write8().
Call usb_write8() directly and drop _rtw_write8().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_write16()

_rtw_write16() is a wrapper function, being used to call usb_write16().
Call usb_write16() directly and drop _rtw_write16().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_write32()

_rtw_write32() is a wrapper function, being used to call usb_write32().
Call usb_write32() directly and drop _rtw_write32().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_write_port_cancel()

_rtw_write_port_cancel() is a wrapper function, being used to call
usb_write_port_cancel().
Call usb_write_port_cancel() directly and drop _rtw_write_port_cancel().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_write_port()

_rtw_write_port() is a wrapper function, being used to call usb_write_port().
Call usb_write_port() directly and drop _rtw_write_port().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_read_port_cancel()

_rtw_read_port_cancel() is a wrapper function, being used to call
usb_read_port_cancel().
Call usb_read_port_cancel() directly and drop _rtw_read_port_cancel().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_read_port()

_rtw_read_port() is a wrapper function, being used to call usb_read_port().
use usb_read_port() directly and drop _rtw_read_port().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_writeN()

_rtw_writeN() is a wrapper function, being used to call usb_writeN().
Call usb_writeN() directly and drop _rtw_writeN().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Instead of intf_hdl pass adapter in read & write functions

intf_hdl is passed in usb_[read,write][8,16,32]() functions, which
is then passed to vender_request() there it's used to get adapter pointer,
so instead of passing intf_hdl we can directly pass adapter.

This change will also help in removing rtw_[read,write][8,16,32]() wrapper
functions being used to call usb_[read,write][8,16,32]() functions.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>