Chase Southwood [Wed, 3 Sep 2014 23:58:49 +0000 (18:58 -0500)]
staging: comedi: hwdrv_apci1500: use dev->class_dev in calls to dev_warn()
git-grep reveals that hwdrv_apci1500.c is the only file in comedi that uses
dev->hw_dev in calls to dev_{err,warn}(). The rest of the drivers pass
dev->class_dev to these macros instead. Switch the dev_warn() calls in
this driver to use dev->class_dev as well, for consistency.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:46:00 +0000 (13:46 +0100)]
staging: comedi: s626: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:59 +0000 (13:45 +0100)]
staging: comedi: rtd520: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:58 +0000 (13:45 +0100)]
staging: comedi: ni_pcidio: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:57 +0000 (13:45 +0100)]
staging: comedi: ni_mio_common: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:56 +0000 (13:45 +0100)]
staging: comedi: ni_labpc_common: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:55 +0000 (13:45 +0100)]
staging: comedi: ni_at_a2150: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:54 +0000 (13:45 +0100)]
staging: comedi: me4000: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:53 +0000 (13:45 +0100)]
staging: comedi: dt3000: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:52 +0000 (13:45 +0100)]
staging: comedi: dt282x: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:51 +0000 (13:45 +0100)]
staging: comedi: das1800: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:50 +0000 (13:45 +0100)]
staging: comedi: cb_pcidas64: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:49 +0000 (13:45 +0100)]
staging: comedi: amplc_pci230: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:48 +0000 (13:45 +0100)]
staging: comedi: adl_pci9118: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:47 +0000 (13:45 +0100)]
staging: comedi: addi_apci_3xxx: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:46 +0000 (13:45 +0100)]
staging: comedi: 8253.h: use CMDF_ROUND_...
Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`. The numeric values are unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:45 +0000 (13:45 +0100)]
staging: comedi: add CMDF_ROUND_... as synonyms for TRIG_ROUND_...
The `TRIG_ROUND_...` macros are some of the values that can be OR-ed
into the `flags` member of `struct comedi_cmd`. They may influence the
rounding of sample timings during operation of the asynchronous command.
The names are a bit of a left-over from earlier times. It would be
better to use the names `CMDF_ROUND_...` to match various other command
flags.
Define `CMDF_ROUND_MASK`, `CMDF_ROUND_NEAREST`, `CMDF_ROUND_DOWN`,
`CMDF_ROUND_UP` and `CMDF_ROUND_UP_NEXT` with the same numeric values as
`TRIG_ROUND_MASK`, `TRIG_ROUND_NEAREST`, `TRIG_ROUND_DOWN`,
`TRIG_ROUND_UP` and `TRIG_ROUND_UP_NEXT`, and redefine the
`TRIG_ROUND_...` macros as synonyms of the `CMDF_ROUND_...` macros.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:44 +0000 (13:45 +0100)]
staging: comedi: use CMDF_BOGUS in do_cmd_ioctl()
`TRIG_BOGUS` is now just a synonym for `CMDF_BOGUS`. Change
`do_cmd_ioctl()` to use the new name.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:43 +0000 (13:45 +0100)]
staging: comedi: add CMDF_BOGUS as synonym for TRIG_BOGUS
`TRIG_BOGUS` is one of the values that can be OR-ed into the `flags`
member of `struct comedi_cmd`. It causes the comedi core to go through
some of the motions of setting up an asynchronous command without
actually setting it up. If all goes well, it causes the command set-up
to fail with an `EAGAIN` error.
The name `TRIG_BOGUS` is a bit of a left-over from earlier times. A
better name would be `CMDF_BOGUS` to match various other command flags.
Define `CMDF_BOGUS` with the same numeric value as the old `TRIG_BOGUS`
and redefine `TRIG_BOGUS` as a synonym of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:42 +0000 (13:45 +0100)]
staging: comedi: rtd520: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:41 +0000 (13:45 +0100)]
staging: comedi: pcl812: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:40 +0000 (13:45 +0100)]
staging: comedi: ni_tiocmd: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:39 +0000 (13:45 +0100)]
staging: comedi: ni_mio_common: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is the same.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:38 +0000 (13:45 +0100)]
staging: comedi: ni_labpc_common: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is the same.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:37 +0000 (13:45 +0100)]
staging: comedi: das1800: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:36 +0000 (13:45 +0100)]
staging: comedi: cb_pcidas64: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:35 +0000 (13:45 +0100)]
staging: comedi: cb_pcidas: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:34 +0000 (13:45 +0100)]
staging: comedi: amplc_pci230: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:33 +0000 (13:45 +0100)]
staging: comedi: adv_pci1710: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:32 +0000 (13:45 +0100)]
staging: comedi: adl_pci9118: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged. Also change
diagnostic messages to use "CMDF_WAKE_EOS" instead of "TRIG_WAKE_EOS"
and change the Comedi driver description comment to use "CMDF_WAKE_EOS".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:31 +0000 (13:45 +0100)]
staging: comedi: addi_apci_3120: use CMDF_WAKE_EOS
Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:30 +0000 (13:45 +0100)]
staging: comedi: use CMDF_WAKE_EOS in do_cmd_ioctl()
`TRIG_WAKE_EOS` is now just a synonym for `CMDF_WAKE_EOS`. Change
`do_cmd_ioctl()` to use the new name.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:29 +0000 (13:45 +0100)]
staging: comedi: add CMDF_WAKE_EOS as synonym for TRIG_WAKE_EOS
`TRIG_WAKE_EOS` is one of the values that can be OR-ed into the `flags`
member of `struct comedi_cmd`. It's intended action is tune the
asynchronous command to interrupt at the end of every "scan". The name
is a bit of a left-over from earlier times. A better name would be
`CMDF_WAKE_EOS` to match various other command flags.
Define `CMDF_WAKE_EOS` with the same numeric value as the old
`TRIG_WAKE_EOS` and redefine `TRIG_WAKE_EOS` as a synonym of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:28 +0000 (13:45 +0100)]
staging: comedi: ni_labpc_common: use CMDF_PRIORITY
Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:27 +0000 (13:45 +0100)]
staging: comedi: ni_at_a2150: use CMDF_PRIORITY
Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`. The numeric value is unchanged. Also replace
"TRIG_RT" with "CMDF_PRIORITY" in the kernel messages.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:26 +0000 (13:45 +0100)]
staging: comedi: das1800: use CMDF_PRIORITY
Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:25 +0000 (13:45 +0100)]
staging: comedi: das16: use CMDF_PRIORITY
Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`. The numeric value is unchanged. Also replace
"TRIG_RT" with "CMDF_PRIORITY" in kernel log messages.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 3 Sep 2014 12:45:24 +0000 (13:45 +0100)]
staging: comedi: comedi_test: use CMDF_PRIORITY
Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`. The numeric value is unchanged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Bolle [Thu, 4 Sep 2014 10:44:53 +0000 (12:44 +0200)]
staging: emxx_udc: remove check for CONFIG_MACH_EMGR
There's a check for CONFIG_MACH_EMGR. But the Kconfig symbol MACH_EMGR
doesn't exist. Remove that check and the single #define it hides. Note
that this macro isn't used by this driver anyway.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An Ha [Wed, 3 Sep 2014 22:33:08 +0000 (18:33 -0400)]
Staging: rtl8821ae: base: add missing blank line after declaration
Add a missing blank line after declaration to fix coding style issue.
Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Wed, 3 Sep 2014 21:40:57 +0000 (22:40 +0100)]
staging: et131x: Fix whitespace - alignment matching open parenthesis
Fix occurrences in et131x.c of:
CHECK: Alignment should match open parenthesis
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Wed, 3 Sep 2014 21:40:56 +0000 (22:40 +0100)]
staging: et131x: Add auto-negotiation and 1000BT_Half as supported protocols
The driver supports auto-negotiation and 100BaetT_Half but doesn't
advertise or list it in it's phydev. Fix that.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Wed, 3 Sep 2014 21:40:55 +0000 (22:40 +0100)]
staging: et131x: Remove spinlock fbr_lock
The spinlock fbr_lock is only used in a single call sequence staring
from et131x_poll. As this call is already locked by napi->poll_lock,
we can remove it.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Wed, 3 Sep 2014 21:40:54 +0000 (22:40 +0100)]
staging: et131x: Remove dead code in isr
Dan Carpenter reports:
The patch
c2ebf58ba089: "staging: et131x: Implement NAPI support"
from Aug 21, 2014, leads to the following static checker warning:
drivers/staging/et131x/et131x.c:4004 et131x_isr()
warn: we tested 'status' before and it was 'true'
We don't actually need the dead code, as we're now using NAPI to
handle enabling interrupts - but we do need to enable interrupts if
NAPI is not scheduled - so enable interrupts if this is the case.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An Ha [Wed, 3 Sep 2014 01:00:46 +0000 (21:00 -0400)]
Staging: rtl8821ae: hal_bt_coexist: add a blank newline
Fix coding style issue which requires a blank line after declarations.
Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An Ha [Wed, 3 Sep 2014 01:00:45 +0000 (21:00 -0400)]
Staging: rtl8821ae: hal_bt_coexist: fix curly brace placement
Fix coding style issue where the if statement unnecessarily uses curly
braces for one line statements and where the else conditional statement
should follow the closing curly brace '}'. Also, the open curly brace
'{' should be on the same line as the if statement.
Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An Ha [Wed, 3 Sep 2014 01:00:44 +0000 (21:00 -0400)]
Staging: rtl8821ae: hal_bt_coexist: fix pointer placement coding style issue
Fix pointer placement coding style issue, where using "foo *" is
preferable over "foo*".
Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An Ha [Wed, 3 Sep 2014 01:00:43 +0000 (21:00 -0400)]
Staging: rtl8821ae: hal_bt_coexist: add/remove spaces
Fix coding style issue which requires a space before the open
curly brace '{', after the open parenthesis '(', after a comma, and
after the equal sign '=' in an assignment.
Also, remove unnecessary whitespace after open parenthesis '(' and
before a quoted newline.
Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An Ha [Wed, 3 Sep 2014 01:00:42 +0000 (21:00 -0400)]
Staging: rtl8821ae: hal_bt_coexist: fix commenting style
Fix commenting style from C99 comments to C89 comments
Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Wed, 3 Sep 2014 12:15:16 +0000 (14:15 +0200)]
staging: rtl8723au: Remove write-only variables hal_data_8723a.EEPROM[VP]ID
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Donald [Tue, 2 Sep 2014 23:30:30 +0000 (18:30 -0500)]
drivers: staging: rtl8192u: Fix "space prohibited after that open parenthesis '('" errors
Fix checkpatch.pl "space prohibited after that open parenthesis '('" errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 2 Sep 2014 17:01:50 +0000 (10:01 -0700)]
staging: comedi: skel: remove driver
The comedi skeleton driver is one of the few "hybrid" drivers with
both legacy and PCI attach mechanisms. Instead of splitting this
driver, just remove it. There are many other comedi drivers that
provide better examples.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 13:13:30 +0000 (14:13 +0100)]
staging: comedi: ni_at_a2150: range check board index
The "ni_at_a2150" driver determines the board type by calling
`a2150_probe()`. This reads a register and converts it to a board index
in the range 0 to 3. However, the board table array it indexes into
(`a2150_boards[]`) only has 2 entries. Return an error from the
Comedi driver "attach" handler `a2150_attach()` if the probed board
index is beyond the end of the array.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Voytik [Mon, 8 Sep 2014 14:16:34 +0000 (18:16 +0400)]
staging: binder: fix coding style issues
Fix coding style issues:
* put braces in all if-else branches;
* limit the length of changed lines to 80 columns.
checkpatch.pl warning count reduces by 3.
Signed-off-by: Dmitry Voytik <voytikd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William Panlener [Thu, 4 Sep 2014 03:44:03 +0000 (22:44 -0500)]
staging: android: Break up a long line in binder_send_failed_reply
Kernel coding style. Breaking long lines and strings.
Signed-off-by: William Panlener <wpanlener@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Nicoara [Mon, 8 Sep 2014 19:02:49 +0000 (15:02 -0400)]
staging: ozwpan: use kmalloc_array over kmalloc with multiply
Cleanup checkpatch.pl warnings.
Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Nicoara [Mon, 8 Sep 2014 18:43:44 +0000 (14:43 -0400)]
staging: ozwpan: fix redundant return in void function
Cleanup checkpatch.pl warnings.
Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Nicoara [Mon, 8 Sep 2014 18:41:48 +0000 (14:41 -0400)]
staging: ozwpan: fix redundant else after break or return
Cleanup checkpatch.pl warnings.
Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Nicoara [Mon, 8 Sep 2014 18:39:58 +0000 (14:39 -0400)]
staging: ozwpan: fix missing blank line after declaration
Cleanup checkpatch.pl warnings.
Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Fri, 5 Sep 2014 09:22:46 +0000 (14:52 +0530)]
staging: unisys: uislib: uislib.c: sparse warning of context imbalance
fixed sparse warning : context imbalance in 'pause_device'
unexpected unlock
this patch will generate warning from checkpatch for
lines over 80 character , but since those are user-visible strings
so it was not modified.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Tested-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Wed, 3 Sep 2014 09:29:21 +0000 (14:59 +0530)]
staging: unisys: uislib: uisqueue.c: rewrite of do_locked_client_insert
1) removed unused variables
2) fixed sparse warning of context imbalance in 'do_locked_client_insert'
different lock contexts for basic block
3) removed the call to visor_signalqueue_empty() , this function is
checking whether a signal queue is empty, but the return value
of the function is not beeing used, so it is safe to remove.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Sun, 7 Sep 2014 16:18:29 +0000 (18:18 +0200)]
staging: lustre: ptlrpc: expand the GOTO macro
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@
- GOTO(lbl,\(rc\|c\));
+ goto lbl;
@@
identifier lbl;
expression rc;
@@
- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Sun, 7 Sep 2014 16:18:35 +0000 (18:18 +0200)]
staging: lustre: obdclass: expand the GOTO macro
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@
- GOTO(lbl,\(rc\|c\));
+ goto lbl;
@@
identifier lbl;
expression rc;
@@
- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Sun, 7 Sep 2014 16:18:34 +0000 (18:18 +0200)]
staging: lustre: obdclass: expand the GOTO macro + break
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier lbl,rc,f;
constant c;
@@
- GOTO(lbl,\(rc\|rc->f\|c\));
- break;
+ goto lbl;
@@
identifier lbl;
expression rc;
@@
- GOTO(lbl,rc);
- break;
+ rc;
+ goto lbl;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Sun, 7 Sep 2014 16:18:33 +0000 (18:18 +0200)]
staging: lustre: obdclass: expand double GOTO macros
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier lbl;
@@
if (...)
GOTO(lbl,...);
+else
GOTO(lbl,...);
@@
identifier lbl;
expression e,e1,e2;
@@
if (e)
- GOTO(lbl,e1);
-else GOTO(lbl,e2);
+ e1;
+else e2;
+goto lbl;
@@
identifier lbl1,lbl2;
expression e,e1,e2;
@@
+ e1=e2;
if (e)
- GOTO(lbl1,e1=e2);
-GOTO(lbl2,e1=e2);
+ goto lbl1;
+goto lbl2;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Sun, 7 Sep 2014 16:18:32 +0000 (18:18 +0200)]
staging: lustre: lvfs: expand the GOTO macro
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@
- GOTO(lbl,\(rc\|c\));
+ goto lbl;
@@
identifier lbl;
expression rc;
@@
- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Sun, 7 Sep 2014 16:18:30 +0000 (18:18 +0200)]
staging: lustre: libcfs: expand the GOTO macro
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@
- GOTO(lbl,\(rc\|c\));
+ goto lbl;
@@
identifier lbl;
expression rc;
@@
- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mostyn Bramley-Moore [Sun, 7 Sep 2014 09:46:40 +0000 (11:46 +0200)]
staging/lustre: annotate lock/unlock in lov_stripe_lock / lov_stripe_unlock
Annotate the lock/unlock pair in lov_stripe_lock/lov_stripe_unlock to
avoid sparse warning about a context imbalance.
Part of the eudyptula challenge: http://eudyptula-challenge.org/
Signed-off-by: Mostyn Bramley-Moore <mbmcode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:18 +0000 (15:08 -0500)]
staging/lustre/obdclass: remove local_storage.[ch]
Remove the unused files lustre/obdclass/local_storage.[ch].
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:17 +0000 (15:08 -0500)]
staging/lustre/obdclass: remove llog_ioctl.c
Remove the unused function llog_ioctl() and the file
lustre/obdclass/llog_ioctl.c.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:16 +0000 (15:08 -0500)]
staging/lustre/ptlrpc: remove sptlrpc_conf_target_get_rules()
Remove the unused function sptlrpc_conf_target_get_rules() and its
supporting functions.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:15 +0000 (15:08 -0500)]
staging/lustre/mgc: remove server specific llog handling
In mgc_process_cfg_log() remove code to handle
LLOG_CONFIG_ORIG_CTXT. This context is not setup on clients.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:14 +0000 (15:08 -0500)]
staging/lustre: remove unused OBD methods
Remove the unused OBD device methods:
obd_brw()
obd_cancel()
obd_cancel_unused()
obd_change_cbdata()
obd_create_async()
obd_enqueue()
obd_enqueue_rqset()
obd_extent_calc()
obd_llog_connect()
obd_llog_finish()
obd_llog_init()
obd_merge_lvb()
obd_pin()
obd_pin_observer()
obd_ping()
obd_precreate()
obd_punch()
obd_punch_rqset()
obd_sync()
obd_sync_rqset()
obd_unpin()
obd_unpin_observer()
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:13 +0000 (15:08 -0500)]
staging/lustre/mgc: inline mgc_cancel()
The function mgc_cancel() is never invoked as an OBD device method and
is only called directly from mgc_process_log() so remove it.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:12 +0000 (15:08 -0500)]
staging/lustre/mdc: inline llog methods
In mdc_setup() and mdc_precleanup() call mdc_llog_init() and
mdc_llog_finish() directly rather than through the OBD method wrappers
obd_llog_init() and obd_llod_finish(). Simplify the prototypes of
mdc_llog_init() and mdc_llog_finish() according to their uses.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:11 +0000 (15:08 -0500)]
staging/lustre/mdc: remove unused OBD methods
Remove the unused OBD device methods mdc_pin() and mdc_unpin().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:10 +0000 (15:08 -0500)]
staging/lustre: remove obd_ost.h
Move the structures defined in lustre/include/obd_ost.h to the one
file that uses them (lustre/osc/osc_request.c). Remove the unused
function osc_update_enqueue(). Remove the then empty header
lustre/include/obd_ost.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:09 +0000 (15:08 -0500)]
staging/lustre/osc: remove obsolete llog handling code
In osc_request.c there is no reason to handle any llog contexts since
they are never setup. Remove the functions unused function
osc_llog_init() and the obsolete function osc_llog_finish(). Remove
the llog cleanup code in osc_disconnect() and osc_precleanup().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:08 +0000 (15:08 -0500)]
staging/lustre/osc: remove unused OBD methods
Remove the unused OBD device methods:
osc_brw()
osc_cancel()
osc_cancel_unused()
osc_change_cbdata()
osc_enqueue()
osc_punch()
osc_sync()
and their supporting functions.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:07 +0000 (15:08 -0500)]
staging/lustre/lov: remove unused OBD methods
Remove the unused OBD device methods:
lov_brw()
lov_cancel()
lov_cancel_unused()
lov_change_cbdata()
lov_enqueue()
lov_extent_calc()
lov_getattr()
lov_merge_lvb()
lov_punch()
lov_setattr()
lov_sync()
and their supporting functions.
In lov_iocontrol() remove the unused cases LL_IOC_LOV_SETSTRIPE and
LL_IOC_LOV_SETEA and their supporting functions.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loïc Pellegrino [Thu, 4 Sep 2014 18:28:50 +0000 (19:28 +0100)]
staging/lustre: Different prototypes between the declaration and the definition
Align the prototype of lprocfs_wr_uint() in the declaration with the one used
in the definition.
The prototype is:
int lprocfs_wr_uint(struct file *file, const char __user *buffer,
unsigned long count, void *data)
In obdclass/lprocfs_status.c
But in lustre/include/lprocfs_status.h, the __user annotation is missing for
the attribute buffer.
The correct prototype is the first one (the definition) since:
- This function is eventually called by the write() function pointer of an
instance of struct file_operations
- In this function, buffer is a parameter of copy_from_user()
- Before the commit
73bb1da692d0dc3e93b9c9e29084d6a5dcbc37a6, the declaration
and the definition had the same prototype, but only the .c has been updated.
Correcting this will remove a sparse error and add sparse warnings.
This is a task of the Eudyptula challenge.
Signed-off-by: Loïc Pellegrino <oort10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LABBE Corentin [Thu, 4 Sep 2014 13:24:57 +0000 (15:24 +0200)]
staging: lustre: Annotate user buffer with __user
Fix the warning reported by sparse on drivers/staging/lustre/lnet/lnet/router_proc.c
warning: incorrect type in argument 4 (different address spaces)
The correction is to annotate all user buffer variable by __user
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Thery [Sat, 6 Sep 2014 05:18:47 +0000 (07:18 +0200)]
staging: rtl8188eu: include missing header
This patch fixes the following sparse warnings:
drivers/staging/rtl8188eu/hal/phy.c:46:5: warning: symbol
'phy_query_bb_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:56:6: warning: symbol
'phy_set_bb_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:129:5: warning: symbol
'phy_query_rf_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:140:6: warning: symbol
'phy_set_rf_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:228:6: warning: symbol
'phy_set_tx_power_level' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:324:6: warning: symbol
'phy_set_bw_mode' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:360:6: warning: symbol 'phy_sw_chnl'
was not declared. Should it be static?
Signed-off-by: Nicolas Thery <nthery@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Schlick [Sat, 6 Sep 2014 08:13:09 +0000 (10:13 +0200)]
staging: rtl8821ae: Fix sparse warning by making functions static.
Signed-off-by: Andreas Schlick <ninox@posteo.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Pefferkorn [Wed, 3 Sep 2014 20:23:15 +0000 (22:23 +0200)]
staging: goldfish: avoid multiple assignments
Coding style: avoid multiple assignments
Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Pefferkorn [Wed, 3 Sep 2014 20:23:14 +0000 (22:23 +0200)]
staging: goldfish: document mutex usage
Coding style: document mutex usage
Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Pefferkorn [Wed, 3 Sep 2014 20:23:13 +0000 (22:23 +0200)]
staging: goldfish: fix alignment to match open parenthesis
Coding style: fix alignment to match open parenthesis
Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Pefferkorn [Wed, 3 Sep 2014 20:23:12 +0000 (22:23 +0200)]
staging: goldfish: document spinlock usage
Coding style: document spinlock usage
Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Pefferkorn [Wed, 3 Sep 2014 20:23:11 +0000 (22:23 +0200)]
staging: goldfish: remove useless space after a cast
Coding style: remove useless space after a cast
Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Pefferkorn [Wed, 3 Sep 2014 20:23:10 +0000 (22:23 +0200)]
staging: goldfish: suppress consecutive blank lines
Coding style: suppress consecutive blank lines
Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michał Bartoszkiewicz [Thu, 4 Sep 2014 20:05:36 +0000 (22:05 +0200)]
staging: gs_fpgaboot: remove unnecessary return statements
This fixes "void function return statements are not generally useful"
warnings from checkpatch.pl.
Signed-off-by: Michał Bartoszkiewicz <mbartoszkiewicz@gmail.com>
Reviewed-by: Insop Song <insop.song@gainspeed.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gummerer [Fri, 5 Sep 2014 15:09:34 +0000 (17:09 +0200)]
staging: xgifb: remove unnecessary else
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Gonçalves [Fri, 5 Sep 2014 04:09:46 +0000 (05:09 +0100)]
staging/lustre: Fixed checkpatch warning: Use #include <linux/statfs.h> instead of <asm/statfs.h>
Signed-off-by: Filipe Gonçalves <filipe@codinghighway.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Piotr Witoslawski [Thu, 4 Sep 2014 06:18:53 +0000 (08:18 +0200)]
drivers: staging: dgap: fix the checkpatch.pl issue "Warning: line over 80 characters"
Break lines exceeding 80 characters
Signed-off-by: Piotr Witoslawski <pwitos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juston Li [Thu, 4 Sep 2014 05:42:24 +0000 (22:42 -0700)]
staging: lustre: lmv: lmv_internal.h: fix checkpatch.pl spacing errors
lmv_internal.h:96: ERROR: space prohibited after that open parenthesis '('
lmv_internal.h:96: ERROR: space required before the open parenthesis '('
lmv_internal.h:147: WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaitra Ramaiah [Thu, 4 Sep 2014 15:11:03 +0000 (20:41 +0530)]
Staging: rtl8192u: fix brace style coding issue in r819xU_firmware.c
Signed-off-by: Chaitra Ramaiah <linux.delve@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luca Ceresoli [Wed, 3 Sep 2014 06:28:21 +0000 (08:28 +0200)]
staging: rtl8188eu: fix missing blank lines after declarations
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grzegorz Swirski [Tue, 2 Sep 2014 19:24:04 +0000 (20:24 +0100)]
staging: android: use braces on all arms of if
Signed-off-by: Grzegorz Swirski <grzegorz@swirski.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:04:00 +0000 (12:04 +0100)]
staging: comedi: amplc_pci230: simplify interrupt enable handling
`struct pci230_private` has two members to manage the enabled interrupt
sources. `int_en` is the interrupt sources we want to be enabled and
`ier` is a shadow of the write-only interrupt enable register. They
have the same value most of the time. They differ in the interrupt
handler (`pci230_interrupt()`) itself when it temporarily clears bits in
the interrupt enable register and the `ier` member in order to unlatch
them in hardware, but leaves the `int_en` member alone. They also
differ in `pci230_ai_stop()` and `pci230_ao_stop()` which clear bits in
the `int_en` member and wait for the interrupt handler to finish before
copying the value to the `ier` member and the interrupt enable register.
Simplify the handling a bit, by making the `ier` member take on the role
of the `int_en` member, and allowing the value to differ from the
interrupt enable register while the interrupt handler is running.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:59 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: change pci230_handle_ao_fifo() return type
Change the return type of `pci230_handle_ao_fifo()` from `int` to
`bool`. A return value of `true` indicates the AO command is still
running.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / openwrt / staging / blogic.git / log