uboot-mediatek: add noncached_set_region prototype to fix build

Building uboot-mediatek fails with GCC-14, uboot v2024.10 and
CONFIG_SYS_NONCACHED_MEMORY defined with error:
cmd/cache.c: In function 'do_dcache':
cmd/cache.c:57:25: error: implicit declaration of function
'noncached_set_region' [-Wimplicit-function-declaration]

This is caused by upstream commit 7d6cee2cd0e2e2507aca1e3a6fe0e2cb241a116e
("cmd: cache: Remove weak functions") as this removes weak functions in
favor of arch-specific definitions.

This patch adds the function prototype for `noncached_set_region` to
arch-specific header for ARM. It also adds an include in cmd/cache.c to
make the function available there.

Fixes: #16697
Fixes: f8c22c9bff ("uboot-mediatek: update to U-Boot 2024.10")
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
[@dangowrt refreshed patch]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: mt7622: add netdev rename preinit script

Add preinit script to rename network interfaces according to the
label provided in Device Tree.

Fixes: b6d8297510 ("mediatek: mt7622: add Adtran SmartRG SDG-841t6 device")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: reorder alphabetically

Reorder scripts to keep alphabetical order.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

mediatek: filogic: fix network config for mt7986b-rfb

Fix the network configuration according to the device tree.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

generic: fix kernel version and ordering of Aquantia backports

Two patches declared as accepted in v6.13 were already accepted for
v6.12. Fix filenames and order of patches applied.

Reported-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Fixes: 8cc049cec2 ("generic: phy: aquantia: move accepted patches to backport-6.6")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: use NVMEM framework on all Adtran devices

Use NVMEM framework to assign MAC addresses and WiFi EEPROM data on
all Adtran SmartRG devices.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: mt7622: add Adtran SmartRG SDG-841t6 device

Specification
 SoC:   MediaTek MT7622A (2x Cortex-A53)
 RAM:   NANYA NT5CC256M16ER-EK (512 MiB)
 MMC:   Kioxia THGBMNG5D1LBAIT (4 GiB)
 ETH0:  Intel/MaxLinear GPY211 (2500M/1000M/100M/10M)
 ETH1:  Lantiq/Intel/MaxLinear PEF7071/GPY111 (1000M/100M/10M)
 WLAN0: MediaTek MT7915E + MT7975D 2T2R 802.11bgn/ax (2.4G)
                                   2T2R 802.11an/ac/ax (5G L)
 WLAN1: MediaTek MT7915E + MT7975A 4T4R 802.11an/ac/ax (5G H)
 BT:    BT5 provided by MT7915E+MT7975D (missing firmware)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: add driver for Adtran MFGINFO NVMEM layout

This driver allows retrieving MAC addresses and other factory information
via the NVMEM framework on Adtran devices.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: mt7622: enable HWMON in kernel config

Building HWMON as module prevents some other drivers from getting built
into the kernel, e.g. mxl-gpy. Always enable HWMON and also set
THERMAL_HWMON.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: net: phy: intel-way: add support for PHY LEDs

Add driver support for PHY LEDs for MaxLinear/Intel/Lantiq XWAY
Ethernet PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: net: phy: mxl-gpy: add support for PHY LEDs

Add driver support for PHY LEDs for MaxLinear/Intel GPY Ethernet PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: phy: aquantia: correctly describe LED polarity

Backport newly introduced support for 'active-high' property and use
it to correctly implement polarity assignment for Aquantia PHY LEDs.
Previously the 'active-low' property was used to switch a LED PIN to
active-high ("drive VDD" in Aquantia-speak) mode.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: phy: aquantia: move accepted patches to backport-6.6

Move patches accepted upstream from pending-6.6 to backport-6.6.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: net: phy: be more conservative about MAC interface selection

Only add SerDes interface modes at lower speeds to host_interfaces.

Fixes: 5281033831 ("generic: net: phy: use all SerDes MAC interface modes")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

qoriq: add squashfs to FEATURES

The snapshot builds for qoriq only contain ext4 images. Add squashfs to
FEATURES to also have the buildbots build squashfs images.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

kernel: fix mtk_eth_soc memory corruption issue on fq dma init

Signed-off-by: Felix Fietkau <nbd@nbd.name>

qoriq: add missing kernel config symbol

Dropping the source-only flag from qoriq and adding it to the buildbots
exposed a missing kernel config symbol: CONFIG_DRM_OFDRM. Addd it as
disabled to the qoriq kernel config, as the only device currently
supported in the qoriq target does not have any display hardware.

Reported-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

tools/ninja: update to 1.12.1

Update to the most recent stable release,
including a new job scheduler and bug fixes.

Backport a patch to assist in reworking jobserver support.

The original patch for jobserver support requires reworking
due to the function CanRunMore() and its usage
being significantly changed, including the return
becoming an integer instead of a boolean.

AcquireToken() must now be used in CanRunMore()
in order to quantify how much the job searching loop
is able to run at any time, and in order to do so
CanRunMore() cannot be a constant function anymore.

Added:
 - 010-backport-gtest.patch

Manually Adjust:
 - 100-make_jobserver_support.patch

Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16693
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/ninja: use existing ninja to build ninja

Add methods to skip the building and execution of Ninja by python
in order to allow Make to execute Ninja after the configure script.

This allows the user to build Ninja only once
if they already have an older version of Ninja built.

It also allows the user to test the jobserver functionality
by having Ninja built twice (clean then compile).

Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16693
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/ninja: cleanup Makefile

Use default CXXFLAGS and LDFLAGS variables.

Directly add --verbose flag without a variable.

Split up lines for script arguments.

Delete unnecessary lines.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16693
Signed-off-by: Robert Marko <robimarko@gmail.com>

mvebu: cortex-a9: add upgrade methode to nas1dual

The blamed commit adds a upgrade recipe for nas1dual to specify the
firmware partition name, but does not actually include the recipe that
will be called.

Since it previously relied on the default one, add that one.

Fixes: d21720fa90c8 ("mvebu: fix default partition name")
Link: https://github.com/openwrt/openwrt/pull/16704
Signed-off-by: Robert Marko <robimarko@gmail.com>

xdp-tools: bump to 1.4.3

Release notes:
https://github.com/xdp-project/xdp-tools/releases/tag/v1.4.3

Remove upstreamed patch
023-libxdp-fix-compilation-on-multiarch-systems.patch.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

libbpf: bump to 1.4.6

Release notes:
https://github.com/libbpf/libbpf/releases/tag/v1.4.6

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

qoriq: drop source-only flag

While the qoriq target currently supports only one device, the
WatchGuard Firebox M300, the feedback from people using it is that it's
a great bang for the buck. Additionally, people suggest having no
snapshots available hurts adoption.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

qoriq: use nvmem for MAC addresses

Userspace handling is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16308
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

rtl83xx: fix typo

Removes an unwanted special character in a debug-message.

Signed-off-by: Peter Körner <peter@mazdermind.de>

mvebu: fix sysupgrade failure

Linksys devices do no pass $cmd at all.

Fixes: #16148
Fixes: 715634e6d144 ("base-files: upgrade: nand: use "cmd" argument for extracting command")
Signed-off-by: Boris Krasnovskiy <borkra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16690
Signed-off-by: Robert Marko <robimarko@gmail.com>

mvebu: fix default partition name

The firmware partition name is specifc to ipTIME NAS1dual and should not be
set globally.

Fixes: #16148
Fixes: 6ff970bb51f5 ("mvebu: add support for ipTIME NAS1dual")
Signed-off-by: Boris Krasnovskiy <borkra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16690
Signed-off-by: Robert Marko <robimarko@gmail.com>

mac80211: fix letting drivers iterate over keys

Skip non-uploaded keys to avoid corner cases

Signed-off-by: Felix Fietkau <nbd@nbd.name>

tools/cmake: update to 3.30.5

Release notes: https://cmake.org/cmake/help/latest/release/3.30.html

Signed-off-by: Jack Sun <sunjiazheng321521@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16657
Signed-off-by: Robert Marko <robimarko@gmail.com>

uboot-mediatek: update to U-Boot 2024.10

Update to latest U-Boot release.
Patches refreshed and fixed when needed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

ramips: use nvmem to get mikrotik mac

73a9f9f857947bc63fef1aefb7e2e4b906fb9d2b added support. Let's use it.
Calibration data is not yet supported.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16256
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mediatek: ASUS TUF-AX6000: Add Green & Red LEDs

Beside the already existing control of the
Blue cover LED, this will also add the
Green and the Red cover LEDS available in the
Asus TUF-AX6000.

Signed-off-by: Magnus Sandin <magnus.sandin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16632
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

toolchain/binutils: remove old versions

Reduce supported versions to 3.
Since 2.40 is supported by previous release, this commit
keeps it.

Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/16597
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

linux: generic: dsa: mv88e6xx: Drop obsolete patch

As described by Tobias Waldekranz this patch is obsolete
and the issue is already fixed in the upstream kernels we
are using.

Link: http://lists.openwrt.org/pipermail/openwrt-devel/2024-October/043238.html
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

linux: generic: net: dsa: mv88e6xxx LED support

This solution that is needed for some routers to provide proper
LED activity when controlled directly by the MV88E6xxx switch,
has just been merged in upstream Linux.

Make this patch 901 as other backports from earlier kernels
are in patch 896 and this is the first free number after
that.

Patch offsets in pending patches are augmented as part of
the refresh.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

ramips: remove useless cs gpio code for rt2800 SPI driver

The SPI driver framework can handle it automatically in
spi.c:spi_setup():spi_set_cs():gpiod_set_value_cansleep().

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16636
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

scripts/download.pl: use perl builtins instead of system()

Perl natively supports renaming files and create directories.
Do it without calling system().

Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://github.com/openwrt/openwrt/pull/16542
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

wireless-regdb: Update to version 2024.10.07

b66b9a1 wireless-regdb: update regulatory database based on preceding changes
5097b4a wireless-regdb: Update regulatory info for Tanzania (TZ) for 2024
29633a6 wireless-regdb: Update regulatory info for Pakistan (PK) for 2024
b44edb2 wireless-regdb: Update regulatory info for Serbia (RS) for 2024
dbfae47 Revert "wireless-regdb: Update regulatory info for Serbia (SR) for 2024"
8e3d27c wireless-regdb: Correct regulatory rules of 6GHz frequency for Türkiye (TR)
8760bc3 wireless-regdb: Update regulatory info for Honduras (HN) for 2023
3ba2c53 wireless-regdb: Update regulatory info for Israel (IL) for 2021
83c175c wireless-regdb: Update regulatory info for Kuwait (KW) for 2022
388c80c wireless-regdb: Update regulatory info for Serbia (SR) for 2024
bf55ed4 wireless-regdb: Add .b4-config
3afe172 wireless-regdb: Update .gitignore
3b34761 wireless-regdb: Correct regulatory rules for China (CN)
003c282 wireless-regdb: Update regulatory info for Philippines (PH) on 6GHz
21fcb86 wireless-regdb: Update regulatory info for Guatemala (GT) for 2020
158f105 wireless-regdb: Update regulatory info for Bahrain (BH) for 2024
218d146 wireless-regdb: Add regulatory info for Namibia (NA) for 2023
aad0c26 wireless-regdb: Update regulatory info for Togo (TG) for 2022
983f551 wireless-regdb: Update regulatory info for El Salvador (SV) on 6GHz
58575b4 wireless-regdb: Update regulatory info for Peru (PE) on 6GHz
bad3985 wireless-regdb: Update regulatory info for New Zealand (NZ) for 2022
c7d1083 wireless-regdb: Update regulatory info for Qatar (QA) on 6GHz

Signed-off-by: Itay Shoshani <itai.sho@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16678
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gdb: Remove MIPS NSIG patch

This bug was fixed in the libc:
https://sourceware.org/bugzilla/show_bug.cgi?id=14523
https://git.busybox.net/uClibc/commit/?id=2da958760f798224065508431787e3a83b7fe2ae
https://git.musl-libc.org/cgit/musl/commit/?id=7c440977db9444d7e6b1c3dcb1fdf4ee49ca4158

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gdb: Remove upstreamed SIGINT patch

The problem was fixed upstream, see:
https://sourceware.org/bugzilla/show_bug.cgi?id=18945
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4c35c4c6a779c79e456b7a5311f74aafc9026bd5

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gdb: Update to version 15.2

See news file for changes:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=gdb/NEWS;hb=gdb-15.1-release

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

toolchain: gdb: Update to version 15.2

See news file for changes:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=gdb/NEWS;hb=gdb-15.1-release

This requires a C++17 compiler compatible compiler.

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

lantiq: ase: disable adm6996 and swconfig

The ase subtarget supports two devices. ALLNET ALL0333CJ has one
Ethernet port and uses only the built-in MAC and PHY. The second
device is the Netgear DGN1000, which uses an AR8216 switch.

The driver for the adm6996 switch was probably accidentally
enabled instead of the ar8216 in commit that restores ase support
9b321bc60de3 ("lantiq: add Amazon-SE subtarget").

Before removing the ase subtarget, only ar8216 was enabled
c82183639512 ("lantiq: remove unmaintained code").

Reduce uncompressed kernel size by 15.6 kB.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/15332
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

lantiq: ase: refresh config

This was done by executing these command:
$ make kernel_oldconfig CONFIG_TARGET=subtarget

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/15332
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ppp: clean up makefile

The latest ppp version seems to no longer require these ancient
build fixes.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ppp: remove discovery phase timeout hack patch

In the original code, the entire time delay of the discovery phase
is only 5+5x2+5x2x2 = 35s. Increasing timeout may be necessary if
discovery phase fails on first attempt. There is a chance to fix
the "Timeout waiting for PADO packets" issue by removing this patch.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ppp: remove uClibc wtmp hack patch

The uClibc library support was removed since commit:
57fe7d5401e3 ("toolchain: remove uClibc install stuff")

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ppp: update to 2.5.1

ChangeLog:
https://github.com/ppp-project/ppp/blob/ppp-2.5.1/ChangeLog

Suppressed patches:
010-use_target_for_configure.patch [1]
510-pptp_compile_fix.patch [2]
520-u_int_bsd_fix.patch [3]

Upstreamed patches:
330-retain_foreign_default_routes.patch [4]
521-remove_unused_openssl_dep.patch [5]

[1] https://github.com/ppp-project/ppp/commit/e48a9b5de46b6d3a7fda98ac64de56092471ab98
[2] Merged into "500-add-pptp-plugin.patch"
[3] https://github.com/ppp-project/ppp/commit/797cdae57c27ed74a5ec3b4675f31f2c6cfc98ae
[4] https://github.com/ppp-project/ppp/commit/9856f47063c01096fe6649a21be9a021e42a45fe
[5] https://github.com/ppp-project/ppp/commit/59342ab622a96393d25d3a2f0592c8675e771295

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ppp: update to 2.5.0

ChangeLog:
https://github.com/ppp-project/ppp/blob/ppp-2.5.0/ChangeLog

Upstreamed patches:
120-debian_ipv6_updown_option.patch [1]
133-fix_sha1_include.patch [2]
140-pppd-Fix-compilation-with-older-glibc-or-kernel-head.patch [3]
141-Expand-byte-count-statistics-to-64-bits-298.patch [4]
142-pppd-Add-support-for-registering-ppp-interface-via-L.patch [5]
143-pppd-Workaround-for-generating-ppp-unit-id-on-Linux-.patch [6]
144-pppd-Retry-registering-interface-when-on-rtnetlink-E.patch [7]

Suppressed patches:
200-makefile.patch [8]
201-mppe_mppc_1.1.patch [9]
203-opt_flags.patch [10]
300-filter-pcap-includes-lib.patch [11]
511-pptp_cflags.patch [12]
600-Revert-pppd-Use-openssl-for-the-DES-instead-of-the-l.patch [13]
610-pppd_compile_fix.patch [14]

[1] https://github.com/ppp-project/ppp/commit/7f8c1a1f8e486b232340fd9a0a19c5d34f1c5ae0
[2] https://github.com/ppp-project/ppp/commit/ba7f7e053daae846a54a1d08d3d133a5f1266ace
[3] https://github.com/ppp-project/ppp/commit/98ec18f098e5ef68e3a8cc6954fcaf5a7fb8b7be
[4] https://github.com/ppp-project/ppp/commit/81ad945630120cc1c27c8bb00503be42b76ff202
[5] https://github.com/ppp-project/ppp/commit/4a54e34cf5629f9fed61f0b7d69ee3ba4d874bc6
[6] https://github.com/ppp-project/ppp/commit/44609bfc974bdafc0316d069aabf5e2903efa805
[7] https://github.com/ppp-project/ppp/commit/089687fbcc6524809ae9f4b2f8145fe3c2a91147
[8] enable_eaptls=no, with_pcap=no, HAVE_CRYPT_H=1 in configure
[9] enable_microsoft_extensions=yes, MPPC support is removed.
[10] fPIC ignored so far
[11] done by autotools
[12] in main patch for pptp plugin
[13] with_openssl=no, already in upstream ppp-des.c
[14] with_static_pcap=yes from patch 310

Signed-off-by: Sergey Ivanov <icegood1980@gmail.com>
* Fix package hash.
* Fix multilink variant build.
* Fix some compile errors.
* Some code format fixes.
* Refactor commit message.
* Rebase git and fix conflicts.

Co-authored-by: Shiji Yang <yangshiji66@qq.com>
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

openwrt-keyring: add apk public key for signing of package indexes

apk/openwrt-snapshots.pem contains Elliptic Curve based public key which
is going to be used for signing of apk's package.adb package indexes
after the builds using `apk adbsign --sign-key <key> packages.adb`
command on the buildbot.

References: https://github.com/openwrt/buildbot/pull/46
Link: https://github.com/openwrt/openwrt/pull/16539
Signed-off-by: Petr Štetiar <ynezz@true.cz>

realtek: scripts: fix error in belkin-header

For some reason the new belkin-header.py script works without issues
in a local Fedora build environment. In the OpenWrt build pipeline it
produces the following errors:

Traceback (most recent call last):
  File "/builder/shared-workdir/build/scripts/belkin-header.py", line 92, in <module>
    head = create_header(buf, args.belkin_header, args.belkin_model)
  File "/builder/shared-workdir/build/scripts/belkin-header.py", line 68, in create_header
    head[28:29] = VERSION1.to_bytes(1)
TypeError: to_bytes() missing required argument 'byteorder' (pos 2)

This may be related due to different python version. Fix this by
handing over the needed parameters

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16667
Signed-off-by: Robert Marko <robimarko@gmail.com>

mt76: update to Git HEAD (2024-10-11.1)

ecca0e77b4bc wifi: mt76: mt7915: fix omac index assignment after hardware reset

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kernel: bump 6.6 to 6.6.56

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.56

No patches needed a rebase

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16655
Signed-off-by: Nick Hainke <vincent@systemli.org>

kernel: bump 6.6 to 6.6.55

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.55

Added the following default ksym to target/linux/generic/config-6.6:
CONFIG_PROC_MEM_ALWAYS_FORCE=y
# CONFIG_PROC_MEM_FORCE_PTRACE is not set
# CONFIG_PROC_MEM_NO_FORCE is not set

Removed upstreamed:
generic/backport-6.6/780-23-v6.12-r8169-Fix-spelling-mistake-tx_underun-tx_underrun.patch[1]
generic/backport-6.6/780-25-v6.12-r8169-add-tally-counter-fields-added-with-RTL8125.patch[2]
generic/pending-6.6/684-gso-fix-gso-fraglist-segmentation-after-pull-from-fr.patch[3]
lantiq/patches-6.6/0025-v6.12-net-ethernet-lantiq_etop-fix-memory-disclosure.patch[4]

Manually rebased:
bcm27xx/patches-6.6/950-0086-Main-bcm2708-bcm2709-linux-port.patch
bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=f02fcb7283b1c25f7e3ae07d7a2c830e06eb1a62
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=1c723d785adb711496bc64c24240f952f4faaabf
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=af3122f5fdc0d00581d6e598a668df6bf54c9daa
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=e66e38d07b31e177ca430758ed97fbc79f27d966

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16655
Signed-off-by: Nick Hainke <vincent@systemli.org>

mt76: update to Git HEAD (2024-10-11)

513bd7683746 Revert "wifi: mt76: mt7915: disable the second PCIe link for MT7915"
703c6b78c133 wifi: mt76: mt7915: firmware restart on devices with a second pcie link

Signed-off-by: Felix Fietkau <nbd@nbd.name>

generic: backport BLOCK OF support patch

Backport BLOCK OF support patch merged upstream and refresh pending
BLOCK patches.

This is a new way to declare partition table for BLOCK device (eMMC
currently supported) with the use of DTS.

Current pending patch are adapted to not cause regression with current
downstream implementation of a similar functionality.

Also enable the new OF_PARTITION config by default.

Link: https://github.com/openwrt/openwrt/pull/16663
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ipq40xx: switch to zImage kernel for SKSpruce WIA3300-20

The bootloader can support zImage linux kernel which can decrease
the firmware image size.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16662
Signed-off-by: Robert Marko <robimarko@gmail.com>

netifd: update to Git HEAD (2024-10-06)

3c6265fdbd02 wireless: reload wireless device if any vif network bridge changes ifindex

Signed-off-by: Felix Fietkau <nbd@nbd.name>

uboot-rockchip: Update to 2024.10

Removed upstreamed patches.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/16647
Signed-off-by: Nick Hainke <vincent@systemli.org>

scripts/feeds: force kernel package scan after a target installation

When a target is installed from a feed, the linux kernel package is scanned
before the installation of this target.
If some kernel module packages are defined in this feeds at the target
level, there were not parsed during the scan of linux kernel package, as
the target didn't exist yet. So these kernel module packages don't exist.

Once the target is installed, clean the linux kernel packageinfo to force
the scan of the linux kernel package next time this script (or the make
command) is called.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.117548.1727195440.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

realtek: refresh patches

CI is saying that patches need to be refreshed, so refresh them.

Link: https://github.com/openwrt/openwrt/pull/16653
Signed-off-by: Robert Marko <robimarko@gmail.com>

mt76: update to Git HEAD (2024-10-10)

86b41a32a5ac wifi: mac80211: don't use rate mask for offchannel TX either
82a452919f52 wifi: mac80211: handle ieee80211_radar_detected() for MLO
02c07fe539b4 wifi: mt76: mt7996: fix rx filter setting for bfee functionality
a902bfa6db2f wifi: mt76: mt7915: disable the second PCIe link for MT7915
a7d48cd3ed34 wifi: mt76: mt7915: reduce the number of command retries
0d8474602a9b wifi: mt76: mt7915: decrease timeout for commonly issued MCU commands
5f6051569639 wifi: mt76: mt7915: add module param to select 5 GHz or 6 GHz on MT7916
f5bccb122305 wifi: mt76: mt7996: fix invalid interface combinations
6a1199463fc8 wifi: mt76: mt7915: Fix an error handling path in mt7915_add_interface()

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mpc85xx: handle MSM460 wifi mac in dts

Userspace handling is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

kernel: netdevices: add RmNet MAP support

RmNet driver provides a transport agnostic MAP (multiplexing and
aggregation protocol) support in embedded module. Module provides
virtual network devices which can be attached to any IP-mode
physical device.

This is commonly used on Qualcomm based modems for data aggregation.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>

kernel: backport upstream commit that allows leaving out .ndo_get_stats64

Fixes mac80211 backport device statistics.

Fixes: #16642
Signed-off-by: Felix Fietkau <nbd@nbd.name>

generic: net: phy: use all SerDes MAC interface modes

Instead of forcing 2.5G PHYs into rate-adapter mode which results higher
energy consumption, lack of support for half-duplex modes and typically
worse performance when linked at speeds less than 2.5G, use SGMII mode
which allows the MAC to follow the PHY speed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: net: phy: realtek: various improvements

Follow the advise of Russell King allows to greatly improve the driver
for RealTek's 1G and 2.5G Ethernet PHYs. The results are full/half
duplex as well as Gbit master/slave property being read from PHY
Specific Status Register (PHYSR), and fixes regarding link-partner
advertisement.

Fixes: #14504
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: update MediaTek PHY patchset

The previous iteration of MediaTek's PHY patches caused various weird bugs.
Drop culprit patch 733-10-net-phy-mediatek-Extend-1G-TX-RX-link-pulse-time.patch
and use the most recent iteration of the patchset which has been posted to the
netdev mailing list.

Link: https://patchwork.kernel.org/project/netdevbpf/list/?series=895513&state=*
Fixes: #16448
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

toplevel.mk: add target feeds in 'make distclean'

When 'make distclean' is called, remove the target feeds.
Otherwise the directory target/linux/feeds/ (with broken symlinks) still
exists after a distclean.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.115093.1726741692.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gpio-button-hotplug: skip disabled buttons

Ignore buttons which are disabled in the devicetree.

Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.117522.1727194512.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ubnt-ledbar: fix compilation error

Wrong variable name from copy/paste.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16640
Signed-off-by: Robert Marko <robimarko@gmail.com>

valgrind: Remove unsupported configure options.

These options are not recognized by the valgrind configure script,
remove them.

Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

valgrind: Fix build on ARMv7

The valgrind configure script checks if host_cpu is set to armv7 or arm.
By default --host is set to arm-openwrt-linux and the host_cpu variable
is set to arm. Then the valgrind build tries to compile valgrind for
armv6 and fails. Set it explicitly to armv7 to compile valgrind with
armv7 support.

Fixes: 1a55d90320c1 ("valgrind: Update to version 3.23")
Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: gpio-rb91x-key: use devm for mutex_init

mutex_destroy is not called in any error paths or in _remove. Just use
devm to do so.

Removed a pointless platform_set_devdata call. Not needed with all of
the devm conversions.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16630
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: gpio-rb4xx: use devm_mutex_init

Also use devm for gpiochip_add_data.

Allows completely removing the _remove function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16622
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: add support for SKSpruce WIA3300-20

Specification
-------------
- SoC       : Qualcomm IPQ4019
- RAM       : 256 MiB DDR3 (NT5CC128M16JR-EK)
- Flash     : 64 MiB SPI NOR (Winbond W25Q512JVFQ)
- WLAN      : IPQ4019 built-in
  - 2.4 GHz : 2x2 MIMO WiFi4
  - 5 GHz   : 2x2 MIMO WiFi5
- Ethernet  : QCA8075 10/100/1000 Mbps 1x WAN (ETH1, PoE); 1x LAN (ETH2)
- USB       : 1x 2.0 Type-A
- UART      : 3.3V, 115200n8
- Buttons   : 1x Reset
- LEDs      : 1x RUN (lime & red)
              1x WiFi 2.4 GHz (lime)
              1x WiFi 5 GHz (lime)
              2x ETH (lime), controlled by the QCA8075 phy
- Power     : DC 12V & 802.3at PoE
- FCC ID    : 2AHKT-WIA3300-20
- TFTP IP   :
  - client  : 192.168.18.254
  - router  : 192.168.18.1

Installation
------------
1. Open uart console and start TFTP server. Copy initramfs image to
   the TFTP root directory and rename it to 'ipqinitramfs.bin'.
2. Power on and press 'Enter' to exit to the u-boot console according
   to the TTL log prompt.
3. Execute commands to load the initramfs image:
   tftpboot && bootm
4. Enter into OpenWrt to backup the partitions if you want to restore
   the stock firmware one day.
5. Override default 'bootcmd' environment variable in u-boot console:
   env set bootcmd 'sf probe && sf read $loadaddr 0x980000 0x800000 && bootm $loadaddr'
   env save
6. Repeat step 3 and flash 'sysupgrade' image in OpenWrt.

Recovery and return to stock
----------------------------
1. Restore the backup firmware partitions in the installation step 4.
2. Restore `bootcmd` environment variable via commands:
   env set bootcmd bootipq && env save

MAC addresses
-------------
+---------+-------------------+
|         | MAC example       |
+---------+-------------------+
| LABEL   | xx:xx:xx:xx:xx:25 |
| LAN     | xx:xx:xx:xx:xx:26 |
| WAN     | xx:xx:xx:xx:xx:25 |
| WLAN 2g | xx:xx:xx:xx:xx:28 |
| WLAN 5g | xx:xx:xx:xx:xx:29 |
+---------+-------------------+

Notice
-----------
1. Some CH340 USB-TTL module doesn't work on this device.
2. The 'firmware' partition consists of four parts in the vendor
   layout:
     * Name            Start           Size
     * rootfs          0x980000        0x1680000
     * 0:HLOS1         0x2000000       0x800000
     * rootfs_1        0x2800000       0x1400000
     * rootfs_data     0x3c00000       0x350000
3. User can control the USB power supply via commands:
   echo enabled > /sys/devices/platform/output-usb-power/state
   echo disabled > /sys/devices/platform/output-usb-power/state

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: generic: enable userspace regulator consumer driver

It can be used to control the power on/off status for the fixed
voltage regulator via sysfs.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq-wifi: update to latest version 2024-10-08

dcbab62 ipq40xx: add BDFs for SKSpruce WIA3300-20

A new board file package "ipq-wifi-skspruce_wia3300-20" will be
added for the incoming device SKSpruce WIA3300-20.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: ubnt-ledbar: use devm_mutex_init

Allows remove the _remove function as devm calls mutex_destroy
automatically.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16615
Signed-off-by: Robert Marko <robimarko@gmail.com>

generic: platform/mikrotik: add wlan lz77 decompress

A number of new (or with recently updated caldata)
Mikrotik devices are using LZ77 magic for wlan tag hard_config data.
New devices include the Chateau LTE12 [1], and ax devices [2]
Newly factory flashed devices may include the hap ac3 [3]

This can be seen in decoded OEM supout [4] dmesg:
"radio data lz77 decompressed from"…

Investigating an arm RouterOS flash.ko module, and supplied example
hard_config dumps, the format was guessed via decompilation and live
debugging [5]. This decoder was then built from the guessed format
specification.

debug prints can be enabled in a DYNAMIC_DEBUG kernel build via the
kernel cmdline:

        chosen {
-               bootargs = "console=ttyS0,115200";
+               bootargs = "console=ttyS0,115200 dyndbg=\"file drivers/platform/mikrotik/* +p\"";
        };

[1]: https://forum.openwrt.org/t/no-wireless-mikrotik-rbd53ig-5hacd2hnd/157763/4
[2]: https://forum.openwrt.org/t/mikrotik-routeros-v7-x-and-openwrt-sysupgrade/148072/17
[3]: https://forum.openwrt.org/t/adding-support-for-mikrotik-hap-ax2/133715/47
[4]: https://github.com/farseeker/go-mikrotik-rif
[5]: https://github.com/john-tho/routeros-wlan-lz77-decode

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Link: https://github.com/openwrt/openwrt/pull/15774
Signed-off-by: Robert Marko <robimarko@gmail.com>

linux-firmware: Update Intel AX101/AX210 firmware

Use most recent version of the Intel AX101 and AX210 firmware provided
by linux-firmware and supported the driver used in OpenWrt.

Link: https://github.com/openwrt/openwrt/pull/16621
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: ar7200 usb phy: simplify probe

Even though optional is used, there's are still pointless NULL
assignments.

Use dev_err_probe to avoid manually handling EPROBE_DEFER.

Use devm_platform_iomap_resource. No struct resource needed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Shiji Yang <yangshiji66@qq.com> on NETGEAR R6100.
Link: https://github.com/openwrt/openwrt/pull/16519
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ipq40xx: fix MAC address on Meraki MR33 and MR74 after nvmem-layout

...conversion.
Commit 20736013e910 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
has causedt he device to no longer correctly read MAC address from its
onboard 24c64 EEPROM, because "at24" driver doesn't support legacy
nvmem-cell bindings [1] - and there was an explicit config option added
to mandate that behaviour in the following patch:

820-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch

But some of the devices, MR33 and MR74 included, weren't converted with
that as well.
Convert the definition to use proper fixed-layout binding to fix it.

The offending change was introduced between v23.05.0 and v23.05.1, and
found by bisection:
git bisect start
# status: waiting for both good and bad commits
# good: [bd4f415efacfc03bbe5b79ae1d39c1451f5f7385] OpenWrt v23.05.0: adjust config defaults
git bisect good bd4f415efacfc03bbe5b79ae1d39c1451f5f7385
# status: waiting for bad commit, 1 good commit known
# bad: [a58a86693f8593974ff7c26bb42e280b62a8724c] OpenWrt v23.05.1: adjust config defaults
git bisect bad a58a86693f8593974ff7c26bb42e280b62a8724c
# good: [3d0a78add22754aa891529b6702b5e4c7b837446] qualcommax: only build initramfs if CONFIG_TARGET_ROOTFS_INITRAMFS is set
git bisect good 3d0a78add22754aa891529b6702b5e4c7b837446
# bad: [21e5db97c410f4008c8fe8515fb79a7cde368dbf] build: add CycloneDX SBOM JSON support
git bisect bad 21e5db97c410f4008c8fe8515fb79a7cde368dbf
# good: [89184b15cfce4aaffac8cda87c2fa74f829ace42] mediatek: add build for MT7981 RFB
git bisect good 89184b15cfce4aaffac8cda87c2fa74f829ace42
# bad: [41f27bbb6d0af2f37098b97cd28d5f514a6fc417] bcm53xx: add the latest fix version of brcm_nvram
git bisect bad 41f27bbb6d0af2f37098b97cd28d5f514a6fc417
# good: [b649b0bf7100bdc6adb7e857c74738cab7c47b4c] kernel: nvmem: fix "fixed-layout" & support "mac-base"
git bisect good b649b0bf7100bdc6adb7e857c74738cab7c47b4c
# bad: [20736013e91030005353b401bc4b757ba5e5fa98] kernel: backport nvmem v6.6 fixes and v6.7 changes
git bisect bad 20736013e91030005353b401bc4b757ba5e5fa98
# good: [066971615ff66512bc542b09a90be34c2afe98bb] kernel: backport v6.6 nvmem changes
git bisect good 066971615ff66512bc542b09a90be34c2afe98bb
# first bad commit: [20736013e91030005353b401bc4b757ba5e5fa98] kernel: backport nvmem v6.6 fixes and v6.7 changes

Link: [1] https://github.com/openwrt/openwrt/issues/15393#issuecomment-2212300849
Fixes: 20736013e910 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
Fixes: https://github.com/openwrt/openwrt/issues/15393
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16623
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: gpio-latch-mikrotik: use devm_mutex_init

Avoids needing to call mutex_destroy in error paths, which is missing
anyway.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16620
Signed-off-by: Robert Marko <robimarko@gmail.com>

mac80211: ath12k: allow country set for WCN7850

Update channels when country set.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16613
Signed-off-by: Robert Marko <robimarko@gmail.com>

base-files: don't wipe LED state when adding a single LED

Only replace LED state of a single LED instead of removing the entire
/var/run/led.state file.

Fixes: 511e8f84d0 ("base-files: configure LED when added")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

tools: libdeflate: bump to 1.22

Bump to the latest 1.22 version which allows dropping our only patch.

Changelog:
Version 1.22
* The CMake-based build system now implements a workaround for gcc being paired
  with a too-old binutils version.  This can prevent build errors.

Version 1.21
* Fixed build error on x86 with gcc 8.1 and gcc 8.2.

* Fixed build error on x86 when gcc 11 is paired with a binutils version that
  doesn't support AVX-VNNI, e.g. as it is on RHEL 9.

* Fixed build error on arm64 with gcc 6.

* Fixed build error on arm64 with gcc 13.1 and later with some -mcpu options.

* Enabled detection of dotprod support in Windows ARM64 builds.

Link: https://github.com/openwrt/openwrt/pull/16617
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath10k-ct: select mac80211 debugfs support

Trying to compile ath10k-ct without mac80211 debugfs support will result in:
openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/ath10k-ct-regular/ath10k-ct-2024.07.30~ac71b14d/ath10k-6.10/wmi.h:8083:2: error: #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware. [-Werror=cpp]
 8083 | #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware.
      |  ^~~~~~~
cc1: all warnings being treated as errors

So, since the driver itself is saying that debugfs is required, then
lets make ath10k-ct select mac80211 debugfs support which is selected
by default anyway.

Fixes: #16302
Link: https://github.com/openwrt/openwrt/pull/16619
Signed-off-by: Robert Marko <robimarko@gmail.com>

cmake.mk: disable shared libs for host packages

Disable for host to avoid having to use rpath hacks.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16586
Signed-off-by: Robert Marko <robimarko@gmail.com>

mediatek: fix wrong compatible string

The u-boot,env driver does not have layout in compatible.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16616
Signed-off-by: Robert Marko <robimarko@gmail.com>

linux-firmware: intel: update BE200 wifi firmware

Kick to version 92 - that already support station
MLO correctly.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16558
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

hostapd: reload bss if a relevant ifindex changes

This can happen if the bridge or a stacked vlan device gets recreated.
Ensure that hostapd sees the change and handles it gracefully.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ramips: ER605v2 fix LED function definition

commit 665c2154ef122d10dfffeca95538ebdff82653b5
added support for ER605v2

All three LEDs where configured with LED_FUNCTION_STATUS
which worked for 23.05 and kernel 5.15.

With the upgrade to kernel 6.6 this leads to a name collision.

Therefore the USB and Power LED now use the common.h function
LED_FUNCTION_USB and LED_FUNCTION_POWER respectivly.

* fixes https://github.com/openwrt/openwrt/issues/16596

Link: https://github.com/openwrt/openwrt/pull/16606
Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16606
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: use OKLI loader for TP-Link RE200 v1 and RE210 v1

Using OKLI image to fix the booting stuck issue.

Tested with u-boot extracted from TP-Link stock images
"RE200(EU)_V1_171206.zip" and "RE210(US_CA)_V1_171205.zip".

Fixes: https://github.com/openwrt/openwrt/issues/16296
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16473
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ramips: introduce TP-Link v1 header OKLI image recipe

It can be used to workaround the booting stuck issue caused by the
u-boot LZMA decompression error.

The new kernel image structure:
+------+------------------+------------------+---------------+-----------------+
| name | tplink-v1 header | OKLI lzma-loader | uImage header | lzma kernel+dtb |
+------+------------------+------------------+---------------+-----------------+
| size |      0x200       |       0xe00      |     0x40      |     dynamic     |
+------+------------------+------------------+---------------+-----------------+

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16473
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath10k-ct: switch to version 6.10

The mac80211 driver backport has been updated to version 6.11. Let's
also push ath10k-ct driver forward. The unsupported feature
'NL80211_EXT_FEATURE_ETHTOOL_VDEV_STATS' has been dropped since it
looks like something for debugging and not supported by the mainline.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16514
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel-build.mk: Fix multi-core build warning.

In the case of multi-core compilation, the warning prompts to add a "+" sign.
````
warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
`````
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16598
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: ws2812b: use devm for mutex_init

Allows removal of _remove function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: leds-ws2812b: remove sub 6.6 support

5.15 and 6.1 are gone.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>