Staging: rt2860: remove dead DFS_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead BLOCK_NET_IF code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead BLOCK_NET_IF code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead BLOCK_NET_IF code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead RALINK_ATE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead RALINK_ATE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead RALINK_ATE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead BIN_IN_FILE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead BIN_IN_FILE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead BIN_IN_FILE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead NINTENDO_AP code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead NINTENDO_AP code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead NINTENDO_AP code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead UCOS code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead UCOS code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead UCOS code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead CONFIG_APSTA_MIXED_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead CONFIG_APSTA_MIXED_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead CONFIG_APSTA_MIXED_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead APCLI_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead APCLI_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead MLME_EX code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead WDS_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead WDS_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead WDS_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead *WSC_INCLUDED code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead WSC_AP_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead WSC_AP_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead UNDER_CE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead UNDER_CE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead UNDER_CE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead WIN_NDIS code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove IWE_STREAM_ADD_*() macros

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove IWE_STREAM_ADD_*() macros

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove kernel version compatibility wrappers

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove kernel version compatibility wrappers

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove unused files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pohmelfs: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pohmelfs: Remove braces around single statements

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pohmelfs: Remove C99 comments

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Evgeniy Polyakov <zbr@ioremap.net>

Staging: pohmelfs: move open brace to same line on structs

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Update README file. Remove Lindent task

Remove Lindent changes as a TODO item in the wlan-ng directory of staging tree.

Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Lindent cleanups

Lindent script cleanups in wlan-ng driver in the staging tree.
This is a item in the TODO list.

Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: p80211wext.c: problem with IW_ENCODE_ALG_WEP

The expression !(ext->alg & IW_ENCODE_ALG_WEP) appears to be incorrect,
because there are several possible values for ext->alg that give 1 when
bit-anded with IW_ENCODE_ALG_WEP.  Therefore Richard Kennedy suggested to
rewrite the code with !=

Added \n at the end of the debug string as well.

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Change KERN_DEBUG or pr_debug to match orig driver

Change uses of KERN_DEBUG over to pr_debug to match original driver
where messages are only needed during driver development.

Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Move firmware loading into driver

Move prism2 firmware loading from userspace into driver, using linux
request_firmware(). Firmware is now loaded (if available) on device
probing, before it is registered as a netdevice and advertised to userspace.

Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: winbond: mac80211 - unify config_interface and bss_info_changed

The commit 'mac80211: unify config_interface and bss_info_changed' from
Johannes Berg <johannes@sipsolutions.net> removed the config_interface structure
tag from struct ieee80211_ops. The BSSID detection functionality migrated to
ieee80211_ops.bss_info_changed.

Since wbsoft_config_interface() was largely empty, there wasn't much to do
other then to remove the function itself. There is currently no support
for BSSID change detection.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: merge rest of wbhal.c to phy_calibration.c

Impact: cleanup

The remaining functions are local to phy_calibration.c so move them
there and remove wbhal.c.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: inline hal_set_rf_power() to mto.c

Impact: cleanup

It's a trivial wrapper that is used in only one place, so lets inline it.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: merge wbhal.c to wbusb.c

Impact: cleanup

This patch moves all the functions in wbhal.c that are used only in
wbusb.c to the latter file.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: reformat wbhal.c

Impact: cleanup

In preparation for merging wbhal.c with wbusb.c, use Lindet to reformat
the file.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: make led lookup tables static

Impact: cleanup

No need to keep read-only data on the stack.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: remove MODULE_AUTHOR

Impact: cleanup

The contact details in MODULE_AUTHOR do not reflect current state of
affairs so remove it.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: reformat wbusb.c

Impact: cleanup

Use scripts/Lindent on the file and clean up the rest by hand.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: inline hal_set_phy_type() to wb35_hw_init()

Impact: cleanup

The hal_set_phy_type() is called in wb35_hw_init() only so inline the
function there. Also remove a redundant assignment of ->phy_type to
RF_WB_242_1.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: clean up comments in wbusb.c

Impact: cleanup

Remove some useless comments and clean up others.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: simplify hal_init_hardware() and hal_halt()

Impact: cleanup

Now that hal_halt() is called from wb35_hw_halt() only where
->InitialResource is always set to 4, we can simplify
hal_init_hardware() and hal_halt().

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: more simplify hal_init_hardware() error handling

Impact: fix, cleanup

If initialization in hal_init_hardware() fails, we call hal_halt() to
clean up and release resource. However, hal_halt() will attempt to
call del_timer_sync() on ->LEDTimer on "stage 3" although it's not
initialized at that point. Fix that up by simplifying error handling
logic in hal_init_hardware() with gotos.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: simplify hal_init_hardware() error handling

Impact: cleanup

Use gotos to simplify the deep if-statement nesting in
hal_init_hardware().

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: simplify error handling in wb35_hw_init()

Impact: cleanup

Change hal_init_hardware() to return an error code rather than a boolean
to simplify error handling in wb35_hw_init().

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: move hal_init_hardware() and hal_halt() int wbusb.c

Impact: cleanup

The hal_init_hardware() and hal_halt() functions are only used in
wbusb.c so move them there.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: replace switch error handling with gotos in wb35_hw_init()

Impact: cleanup

This patch replaces the switch-based error handling in wb35_hw_init()
with regular gotos.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: remove unused code from wbsoft_configure_filter()

We don't initialize hardware multicast filter in the driver nor do we know how
to do that. Therefore, remove some code that isn't actually used from
wbsoft_configure_filter().

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging winbond: boolean negation and bitwise operation in wrong order

The semantic patch that makes this change is:
(http://www.emn.fr/x-info/coccinelle/)

@@ expression E; constant C; @@
(
- !E == C
+ E != C
)

Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: beyond ARRAY_SIZE of wd->ap.wds.encryMode

Do not go beyond ARRAY_SIZE of wd->ap.wds.encryMode

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: 80211core/ccmd.c: Fix Coding Style

Signed-off-by: Dragoslav Zaric <dragoslav.zaric.kd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: remove driver_data direct access of struct device

In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: fix operator precedence errors

`!' has a higher precedence than `&' and `|' has a higher precedence than `?'

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: stlc45xx: replace print_mac with %pM

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: remove unused #include <linux/version.h>'s

Remove unused #include <linux/version.h>'s.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dupilcated #include

Remove dupilcated #include in drivers/staging/rt3070/rt_linux.h.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: wmm_param[1].ac_aci_acm_aifsn tested twice

wmm_param[1].ac_aci_acm_aifsn was tested twice, the second should have been
wmm_param[3].ac_aci_acm_aifsn.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: convert to net_device_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Use to_delayed_work

Use the recently added to_delayed_work() helper function.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: Don't call sprintf() with overlapping input and output.

The use of sprintf() to append to a buffer, as in
  sprintf(buf, "%sEntry: %d\n", buf, i)
is not valid according to C99 ("If copying takes place between objects
that overlap, the behavior is undefined.").  It breaks at least in
userspace under gcc -D_FORTIFY_SOURCE.  Replace this construct with
  sprintf(buf + strlen(buf), "Entry: %d\n", i)

This patch was automatically generated using
  perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g'
  perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g'

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: Don't call sprintf() with overlapping input and output.

The use of sprintf() to append to a buffer, as in
  sprintf(buf, "%sEntry: %d\n", buf, i)
is not valid according to C99 ("If copying takes place between objects
that overlap, the behavior is undefined.").  It breaks at least in
userspace under gcc -D_FORTIFY_SOURCE.  Replace this construct with
  sprintf(buf + strlen(buf), "Entry: %d\n", i)

This patch was automatically generated using
  perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g'
  perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g'

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: replace __FUNCTION__ usages

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sxg: Add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sxg: replace __FUNCTION__ usages

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: meilhaus: fix build warnings

This fixes some build warnings in the meilhaus driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: meilhaus: Remove long-deprecated SA_* interrupt macros.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: meilhaus, move tables to .c

Remove pci and usb tables from the header and place them directly in
the code.

While at it, use PCI_VDEVICE() to shorten the code.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Kiliani <mail@davidkiliani.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: meilhaus, annotate cpi functions

Add __devinit and __devexit to pci probe/remove. Also make pci_driver
static.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Kiliani <mail@davidkiliani.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: meilhaus, switch to misc device

There is no need to occupy one major number because of one device.

Switch to misc device, which also emits uevent, so that the dev node
is also created by udev.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Kiliani <mail@davidkiliani.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: agnx: fix build warnings

This fixes some build warnings in the agnx driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: agnx: replace print_mac with %pM

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, fix bssid compiler warnings

conf->bssid is const. Propagate const to not get compiler warnings:
agnx/pci.c: In function ‘agnx_config_interface’:
agnx/pci.c:319: warning: passing argument 2 of ‘agnx_set_bssid’ discards qualifiers from pointer target type
agnx/pci.c:321: warning: passing argument 2 of ‘hash_write’ discards qualifiers from pointer target type

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, fix fail paths in probe

Return error on fail paths instead of 0.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, remove memlens from probe

Pass 0 to pci_iomap instead. It will cope with that per se.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, probe cleanup

- switch printks to dev_*
- remove useless comments
- remove useless prints (for info we can obtain from lspci or /sys)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: uses udelay, needs delay.h

comedi driver(s) use udelay() so they need to #include delay.h.

drivers/staging/comedi/drivers/adq12b.c: In function 'adq12b_ai_rinsn':
drivers/staging/comedi/drivers/adq12b.c:328: error: implicit declaration of function 'udelay'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: cb_pcidas.c: Fix build warning (type mismatch)

spin_lock_irqsave expects flags to be unsigned long, not unsigned int.

Signed-off-by: Gerard Lledo <gerard.lledo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: usbdux: buffer overflow error handling

These changes guarantee that the URBs are not resubmitted in case of a
comedi buffer overflow.  Otherwise this runs in the background even when
the userspace program has terminated.

From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: Move pcm do_cmdtest function into a single source file

Many of the comedi source code has functions that were created with
cut and paste, this moves the do_cmdtest function into a single file.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: Remove MIN macro

Remove the MIN() macro and instead use the min() provided by kernel.h

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix missing parentheses

Add missing parentheses.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: data.c should include delay.h

Fix this build error:
.../data.c:86: error: implicit declaration of function 'udelay'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: comedi_test.c should include timer.h

Fix this build error:
.../comedi_test.c:82: error: field timer has incomplete type
.../comedi_test.c: In function waveform_ai_interrupt:
.../comedi_test.c:188: error: implicit declaration of function mod_timer
.../comedi_test.c:188: error: jiffies undeclared (first use in this function)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix pcmcia build breakage

Add PCCARD dependancy to the PCMCIA drivers to fix build breakage.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Comedi: vmk80xx: Add k8061 support

This patch adds support for the Velleman K8061 USB board
http://www.velleman.be/ot/en/product/view/?id=364910

Signed-off-by: Manuel Gebele <forensixs@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>