Gabor Juhos [Tue, 24 Sep 2013 13:17:38 +0000 (13:17 +0000)]
rb532: remove trailing whitespaces from image/Makefile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38156
Gabor Juhos [Tue, 24 Sep 2013 12:19:57 +0000 (12:19 +0000)]
ar71xx: image: simplify mynet_n600_mtdlayout
Remove the kernel and rootfs partitions. The Seama
parser can find those automatically:
0x000000070000-0x000000ff0000 : "firmware"
2 seama-fw partitions found on MTD device firmware
0x000000070000-0x0000001b0000 : "kernel"
0x0000001b0000-0x000000ff0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
1 squashfs-split partitions found on MTD device rootfs
0x000000360000-0x000000ff0000 : "rootfs_data"
0x000000ff0000-0x000001000000 : "radiocfg"
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38155
Gabor Juhos [Tue, 24 Sep 2013 12:19:54 +0000 (12:19 +0000)]
ar71xx: enable the Seama firmware parser
It will be used for the WD My Net N600 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38154
Gabor Juhos [Tue, 24 Sep 2013 09:36:26 +0000 (09:36 +0000)]
ar71xx: update the Image/Build/WZRHP macro
- append the root squashfs directly after the kernel,
- use the 64kraw/128kraw template instead of the 64k/128k,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on WZR-HP-G300NH and WZR-600DHP boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38153
Gabor Juhos [Tue, 24 Sep 2013 09:36:25 +0000 (09:36 +0000)]
ar71xx: image: use a common macro for Buffalo WZRHP devices
The Image/Build/WZRHP64K and the Image/Build/WZRHP128K macros
are similar. Move the common stuff into the Image/Build/WZRHP
macro and update the orignal macros to use that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38152
Gabor Juhos [Tue, 24 Sep 2013 08:14:44 +0000 (08:14 +0000)]
ar71xx: image: update Image/Build/CameoAP94 macro
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on a TEW-673GRU board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38151
Gabor Juhos [Tue, 24 Sep 2013 08:14:43 +0000 (08:14 +0000)]
ar71xx: image: use a common macro for Cameo AP94 based devices
The Image/Build/DIR825B1 and the Image/Build/DLRTDEV macros
are identical. Merge those into a new Image/Build/CameoAP94
macro, and update the device profiles to use the new macro.
Also rename the dir825b1_* mtdlayout macros to cameo_ap94_*.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38150
Gabor Juhos [Tue, 24 Sep 2013 06:13:14 +0000 (06:13 +0000)]
ar71xx: image: use the board name for temporary mtdpart files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38149
Gabor Juhos [Tue, 24 Sep 2013 05:58:34 +0000 (05:58 +0000)]
ar71xx: update the Image/Build/UBNT2 macro
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on a WispStation M5 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38148
Gabor Juhos [Tue, 24 Sep 2013 05:58:32 +0000 (05:58 +0000)]
ar71xx: build intramfs images for the Ubiquiti XM boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38147
Gabor Juhos [Tue, 24 Sep 2013 05:58:31 +0000 (05:58 +0000)]
ar71xx: image: use a common macro for UBNTXM/UBNTDEV
The firmware generation part is the same for both
macros. Move that into a separate macro and use the
new macro for Image/Build/UB{NTXM,DEV}.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38146
Gabor Juhos [Tue, 24 Sep 2013 05:58:29 +0000 (05:58 +0000)]
iwinfo: add Ubiquiti WispStation M5 to hardware.txt
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38145
Luka Perkov [Mon, 23 Sep 2013 21:58:36 +0000 (21:58 +0000)]
fix various init scripts
Changes include:
* removing unused variables
* replacing spaces with tabs where appropriate
* more consistency with variable declarations
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38142
Gabor Juhos [Mon, 23 Sep 2013 19:49:27 +0000 (19:49 +0000)]
ar71xx: image: update Image/Build/WHRHPG300N macro
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on the WHR-G301N board only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38141
Gabor Juhos [Mon, 23 Sep 2013 12:54:05 +0000 (12:54 +0000)]
ar71xx: image use the 64kraw template for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38140
Gabor Juhos [Mon, 23 Sep 2013 12:14:20 +0000 (12:14 +0000)]
ar71xx: image: update Build/Image/Planex macro
- remove the 'kernel' and 'rootfs' partitions from the mtd layout,
- move the .okli image into the uImage,
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on the MZK-W300NH board only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38139
Gabor Juhos [Mon, 23 Sep 2013 12:14:19 +0000 (12:14 +0000)]
ar71xx: image: allow to build initramfs for Planex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38138
Gabor Juhos [Mon, 23 Sep 2013 12:14:18 +0000 (12:14 +0000)]
ar71xx: image: build Planex kernels in a separate step
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38137
Gabor Juhos [Mon, 23 Sep 2013 09:49:04 +0000 (09:49 +0000)]
ar71xx: add profile and build image for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38133
Gabor Juhos [Mon, 23 Sep 2013 09:49:02 +0000 (09:49 +0000)]
ar71xx: add user-space support for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38132
Gabor Juhos [Mon, 23 Sep 2013 09:49:01 +0000 (09:49 +0000)]
ar71xx: add kernel support for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38131
Gabor Juhos [Mon, 23 Sep 2013 09:22:50 +0000 (09:22 +0000)]
ar71xx: image: update the Image/Build/CameoHornet macro
- append the root squashfs directly to the kernel,
- use the 64kraw-nojffs template instead of sqashfs-only
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on a TEW-712BR devices only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38130
Gabor Juhos [Mon, 23 Sep 2013 09:01:06 +0000 (09:01 +0000)]
ar71xx: update the Image/Build/Cameo macro
- append the root squashfs directly to the kernel,
- use the 64kraw/64kraw-nojffs template instead of 64k/squashfs-only,
- ensure, that the signature is placed at the correct offset in
the *-factory images,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on DIR-600-A1 and TEW-632BR devices only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38129
Gabor Juhos [Mon, 23 Sep 2013 08:24:10 +0000 (08:24 +0000)]
ar71xx: image: add new macros for AP99 based Cameo devices
The MTD layout of the AP99 based devices is different.
Add new macros to reflect that and use the new macros
for the DIR-615-E4 board.
This prevents overwriting of the 'mac' partition which
contain vital informations. The disadvantage of the change
is that the usable space is reduced by 192KiB. Blame the
vendors for the unfriendly partition layout.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38128
Gabor Juhos [Mon, 23 Sep 2013 08:24:05 +0000 (08:24 +0000)]
ar71xx: image: rename the Cameo macros
Use the reference board name in the macro
instead of the SoC number.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38127
Gabor Juhos [Sun, 22 Sep 2013 20:14:23 +0000 (20:14 +0000)]
ar71xx: image: add optional JFFS2 padding support to the CatFiles macro
Also remove the similar code from the Netgear
profile and use the new feature instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38126
Gabor Juhos [Sun, 22 Sep 2013 20:14:22 +0000 (20:14 +0000)]
ar71xx: image: remove too big files in the CatFiles macro
Also improve the warning message.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38125
Felix Fietkau [Sun, 22 Sep 2013 19:49:23 +0000 (19:49 +0000)]
xtables-addons: fix missing conversion from r38021 (resolves a broken dependency)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38124
Gabor Juhos [Sun, 22 Sep 2013 11:45:09 +0000 (11:45 +0000)]
ar71xx: simplify wndr3700 image generation
- remove the kernel and rootfs partitions from the mtd layout,
the kernel creates those automatically,
- remove estimation step, it is not needed anymore
- put the root squashfs directly after the kernel
- use the 64kraw template
With the default configuration, this allows to use more space for
rootfs_data with 64KiB. Tested on WNDR3700 v1 only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38120
Gabor Juhos [Sun, 22 Sep 2013 11:45:08 +0000 (11:45 +0000)]
ar71xx: use the separate rootfs and uImage parsers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38119
Gabor Juhos [Sun, 22 Sep 2013 11:45:06 +0000 (11:45 +0000)]
ar71xx: sync kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38118
Gabor Juhos [Sun, 22 Sep 2013 09:11:25 +0000 (09:11 +0000)]
ar71xx: image: add mtdpartsize macro
The new macro will be used to determine the firmware
partition size from an MTD layout.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38117
Gabor Juhos [Sun, 22 Sep 2013 09:11:24 +0000 (09:11 +0000)]
ar71xx: image: improve the rootfs_align macro
Improve the macro to return correct value for
all squashfs variant.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38116
Gabor Juhos [Sun, 22 Sep 2013 09:11:22 +0000 (09:11 +0000)]
ar71xx: image: improve the CatFiles macro
Make it possible to append the rootfs image directly
to the kernel.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38115
Gabor Juhos [Sat, 21 Sep 2013 17:56:18 +0000 (17:56 +0000)]
kernel/3.10: add partition parser for Seama firmwares
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38114
Gabor Juhos [Sat, 21 Sep 2013 17:56:09 +0000 (17:56 +0000)]
kernel/3.10: add partition parser for uImage firmwares
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38113
Gabor Juhos [Sat, 21 Sep 2013 17:56:01 +0000 (17:56 +0000)]
kernel/3.10: add default partition name defines to mtdsplit.h
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38112
Gabor Juhos [Sat, 21 Sep 2013 17:55:54 +0000 (17:55 +0000)]
kernel/3.10: add more helpers to the mtdsplit code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38111
Gabor Juhos [Sat, 21 Sep 2013 17:55:49 +0000 (17:55 +0000)]
kernel/3.10: add separate rootfs partition parser
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38110
Gabor Juhos [Sat, 21 Sep 2013 17:55:44 +0000 (17:55 +0000)]
kernel/3.10: move squashfs check from rootfs split code into a separate file
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38109
Gabor Juhos [Sat, 21 Sep 2013 17:55:30 +0000 (17:55 +0000)]
kernel/3.10: allow to use partition parsers for rootfs and firmware split
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38108
Gabor Juhos [Sat, 21 Sep 2013 17:55:18 +0000 (17:55 +0000)]
kernel/3.10: allow to use different MTD parser types
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38107
Gabor Juhos [Sat, 21 Sep 2013 16:08:45 +0000 (16:08 +0000)]
ar71xx: enable wlan2g led in the default configuration of dir-825-c1
Enable the wlan2g led in the default configuration of dir-825-c1.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4079/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38106
Gabor Juhos [Sat, 21 Sep 2013 16:08:44 +0000 (16:08 +0000)]
ar71xx: vanity changes for dir-825-c1
This patch
- changes the color names from orange to amber
- changes the name of GPIO 13 from WIFI_BGN (wifi_bgn) to WLAN_2G
(wlan2g) to be more consistent with the other routers' files
- changes the descriptions of the hardware keys to be a tad more
explicit
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4081/
[juhosg: update the LED migration script as well]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38105
Gabor Juhos [Sat, 21 Sep 2013 15:55:57 +0000 (15:55 +0000)]
ar71xx: diag.sh: consolidate netgear device entries
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38104
Gabor Juhos [Sat, 21 Sep 2013 15:55:56 +0000 (15:55 +0000)]
ar71xx: use the green power led for diag on the WNR2200 board
Make it consistent with the other Netgear boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38103
Gabor Juhos [Sat, 21 Sep 2013 15:55:55 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNDAP360 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38102
Gabor Juhos [Sat, 21 Sep 2013 15:55:54 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR612 v2 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38101
Gabor Juhos [Sat, 21 Sep 2013 15:55:52 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR2200 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38100
Gabor Juhos [Sat, 21 Sep 2013 15:55:51 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR2000 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38099
Gabor Juhos [Sat, 21 Sep 2013 15:55:50 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNDR3700 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38098
Gabor Juhos [Sat, 21 Sep 2013 15:55:49 +0000 (15:55 +0000)]
ar71xx: add an uci-defaults script for LED configuration migration
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38097
Gabor Juhos [Sat, 21 Sep 2013 14:56:24 +0000 (14:56 +0000)]
ar71xx: let HW switch control WAN LED on dir-825-c1
Enable GPIO 20. This hands off control of the blue planet led to the
integrated switch. Consequently, remove the led configuration for the
blue planet led.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4080/
[juhosg: whitespace fixup]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38096
Gabor Juhos [Sat, 21 Sep 2013 14:56:22 +0000 (14:56 +0000)]
ar71xx: image: override mkcameofw status
This allows to build images for other boards, even if
the image is too big for Cameo devices.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38095
Gabor Juhos [Sat, 21 Sep 2013 12:04:45 +0000 (12:04 +0000)]
ar71xx: fix LAN LEDs for dir-825-c1
This patches fixes the lan led configuration. The new configuration is
identical to the one in mach-db120.c and it works. The previous one
didn't work at all.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38094
Steven Barth [Sat, 21 Sep 2013 10:54:13 +0000 (10:54 +0000)]
odhcp6c: handle NoAddrsAvail IA-status
SVN-Revision: 38092
Gabor Juhos [Fri, 20 Sep 2013 16:59:44 +0000 (16:59 +0000)]
ar71xx: set proper wan mac during initial configuration on dir-825-c1
The goal is to set the WAN MAC address to the one on the
sticker on the bottom of the unit. Currently it is not
used at all. But some users expect the WAN interface to
have the MAC address that is written on the sticker.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38091
Gabor Juhos [Fri, 20 Sep 2013 16:41:36 +0000 (16:41 +0000)]
ar71xx: tew-712br: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38090
Gabor Juhos [Fri, 20 Sep 2013 16:41:34 +0000 (16:41 +0000)]
ar71xx: tew-673gru: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38089
Gabor Juhos [Fri, 20 Sep 2013 16:41:33 +0000 (16:41 +0000)]
ar71xx: dir-825-c1: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38088
Gabor Juhos [Fri, 20 Sep 2013 16:41:32 +0000 (16:41 +0000)]
ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38087
Gabor Juhos [Fri, 20 Sep 2013 16:41:31 +0000 (16:41 +0000)]
ar71xx: dir-505-a1: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38086
Gabor Juhos [Fri, 20 Sep 2013 16:41:30 +0000 (16:41 +0000)]
ar71xx: rename ath79_parse_mac_addr to ath79_parse_ascii_mac
Rename the function and extend it in order to make it
usable from board setup code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38085
Gabor Juhos [Fri, 20 Sep 2013 16:41:28 +0000 (16:41 +0000)]
ar71xx: fix Cameo934x initramfs image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38084
Luka Perkov [Fri, 20 Sep 2013 14:24:30 +0000 (14:24 +0000)]
lantiq: fix usb on sx76x
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 38083
Luka Perkov [Fri, 20 Sep 2013 01:59:33 +0000 (01:59 +0000)]
imx6: update gw5400-a dts
- remove common imx6q-ventana.dtsi - there isn't enough commonality to
warrent this
- rename user led's to 1-based
- add alises used by bootloader
- clean up iomux gpios
- fix pfuze slave address
- enable sata
- add delay after release of pci reset downstream from PCIe switch
- remove PCIe clock configuration as its now handled in updated driver
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38081
Luka Perkov [Fri, 20 Sep 2013 01:59:32 +0000 (01:59 +0000)]
imx6: update PCIe driver
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38080
Luka Perkov [Fri, 20 Sep 2013 01:59:30 +0000 (01:59 +0000)]
imx6: update network defaults for Gateworks Ventana
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38079
Luka Perkov [Fri, 20 Sep 2013 01:59:29 +0000 (01:59 +0000)]
imx6: update config
* enable PERF_EVENTS
* enable REGULATOR_ANATOP
* enable VMSPLIT_2G
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38078
Luka Perkov [Fri, 20 Sep 2013 01:59:27 +0000 (01:59 +0000)]
imx6: drop inittab
It's the same as in base-files package.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38077
Gabor Juhos [Thu, 19 Sep 2013 22:36:43 +0000 (22:36 +0000)]
ar71xx: add profile and build image for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38076
Gabor Juhos [Thu, 19 Sep 2013 22:36:42 +0000 (22:36 +0000)]
ar71xx: add sysupgrade support for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38075
Gabor Juhos [Thu, 19 Sep 2013 22:36:41 +0000 (22:36 +0000)]
ar71xx: add user-space support for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38074
Gabor Juhos [Thu, 19 Sep 2013 22:36:40 +0000 (22:36 +0000)]
package/mtd: enable seama fixup code for ar71xx
It will be used for the WD My Net N600.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38073
Gabor Juhos [Thu, 19 Sep 2013 22:36:39 +0000 (22:36 +0000)]
ar71xx: add kernel support for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38072
Gabor Juhos [Thu, 19 Sep 2013 18:43:43 +0000 (18:43 +0000)]
ar71xx: wndr4300: enable HW ECC mode for the NAND controller
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38071
Gabor Juhos [Thu, 19 Sep 2013 18:43:42 +0000 (18:43 +0000)]
ar71xx: add ath79_nfc_set_ecc_mode helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38070
Gabor Juhos [Thu, 19 Sep 2013 18:43:41 +0000 (18:43 +0000)]
ar71xx: ar934x_nfc: add experimental support for hardware ECC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38069
Gabor Juhos [Thu, 19 Sep 2013 18:43:40 +0000 (18:43 +0000)]
ar71xx: ar934x_nfc: return error code from some low-level functions
Change some flow-level unctions to return with an
error code in order to be able to report errors
to the core code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38068
Gabor Juhos [Thu, 19 Sep 2013 18:43:38 +0000 (18:43 +0000)]
ar71xx: ar934x_nfc: use devm_* functions
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38067
Gabor Juhos [Thu, 19 Sep 2013 17:52:45 +0000 (17:52 +0000)]
ar71xx: add profile and build image for the TL-MR13U board
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38066
Gabor Juhos [Thu, 19 Sep 2013 17:52:44 +0000 (17:52 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR13U board
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38065
Gabor Juhos [Thu, 19 Sep 2013 17:52:42 +0000 (17:52 +0000)]
ar71xx: add user-space support for the TL-MR13U board
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38064
Gabor Juhos [Thu, 19 Sep 2013 17:52:41 +0000 (17:52 +0000)]
ar71xx: add kernel support for TP-Link TL-MR13U
This patch adds support for TP-Link TL-MR13U router with built-in 10AH
rechargeable battery.
The patch is based on kamwanlai's patch:
https://forum.openwrt.org/viewtopic.php?pid=206746#p206746
Updated to accommodate recent changes introduced with:
ar71xx: remove fs_* variables from image/Makefile
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
[juhosg:
- refresh and rename rename 930-add-tl-mr13u-support.patch =>
625-MIPS-ath79-add-tl-mr13u-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38063
Gabor Juhos [Thu, 19 Sep 2013 17:52:40 +0000 (17:52 +0000)]
ar71xx: wnr2200: fix a typo in a LED name
Reported-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38062
Gabor Juhos [Thu, 19 Sep 2013 16:56:51 +0000 (16:56 +0000)]
ar71xx: add profile and build image for the WNR2200 board
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38061
Gabor Juhos [Thu, 19 Sep 2013 16:56:50 +0000 (16:56 +0000)]
ar71xx: add user-space support for the WNR2200 board
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38060
Gabor Juhos [Thu, 19 Sep 2013 16:56:48 +0000 (16:56 +0000)]
ar71xx: add kernel support for Netgear WNR2200 wireless router
This patch adds OpenWRT support for the Netgear WNR2200 (N300)
wireless router with USB.
Technical details of this router can be found at
http://www.netgear.com/home/products/wirelessrouters/work-and-play/WNR2200.aspx
and http://wikidevi.com/wiki/Netgear_WNR2200
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
[juhosg:
- add commit message and SoB line from the original patch
- remove dead code from mach-wnr2200.c
- refresh 624-MIPS-ath79-WNR2200-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38059
Felix Fietkau [Thu, 19 Sep 2013 06:33:53 +0000 (06:33 +0000)]
kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38055
John Crispin [Thu, 19 Sep 2013 05:57:00 +0000 (05:57 +0000)]
ralink: make dcs930 uvc camera work
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38054
John Crispin [Thu, 19 Sep 2013 05:56:46 +0000 (05:56 +0000)]
ralink: add support for dalink dcs930l ipcam
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38053
John Crispin [Thu, 19 Sep 2013 05:56:31 +0000 (05:56 +0000)]
ralink: add back dwc_otg driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38052
Luka Perkov [Thu, 19 Sep 2013 00:50:49 +0000 (00:50 +0000)]
lantiq: style fixes
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38051
Luka Perkov [Thu, 19 Sep 2013 00:50:48 +0000 (00:50 +0000)]
lantiq: add initial support for Siemens GIGASX76X
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38050
Luka Perkov [Thu, 19 Sep 2013 00:50:46 +0000 (00:50 +0000)]
lantiq: add support for ZyXEL P2601HNFX
SVN-Revision: 38049
Luka Perkov [Thu, 19 Sep 2013 00:50:44 +0000 (00:50 +0000)]
lantiq: add support for ZTE H201L
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38048
Luka Perkov [Wed, 18 Sep 2013 23:03:47 +0000 (23:03 +0000)]
malta: target.mk cosmetical fixup
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38047
Hauke Mehrtens [Wed, 18 Sep 2013 16:49:52 +0000 (16:49 +0000)]
brcm47xx: b44: bgmac: some small changes to the phylib patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38044
John Crispin [Wed, 18 Sep 2013 16:31:49 +0000 (16:31 +0000)]
lantiq: fix bug in hcd gpio detetcion code
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38043
John Crispin [Wed, 18 Sep 2013 16:31:45 +0000 (16:31 +0000)]
lantiq: fix FRITZ7320 flash window size
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38042
projects / openwrt / staging / ansuel.git / log