git.openwrt.org Git - openwrt/staging/blogic.git/log

drm/i915/gvt: Wean gvt off dev_priv->engine[]

Stop trying to escape out of the gvt layer to find the engine that we
initially setup for use with gvt. Record the engines during initialisation
and use them henceforth.

add/remove: 1/4 grow/shrink: 22/28 up/down: 341/-1410 (-1069)

[Zhenyu: rebase, fix nonpriv register check fault, fix gvt engine
thread run failure.]

Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-2-zhenyuw@linux.intel.com

drm/i915/gvt: cleanup debugfs scan_nonprivbb

Remove extra chatty message for debugfs scan_nonprivbb which is used
to enable scan for non privileged batch on specific engine. Just write
target i915 engine mask instead.

Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-1-zhenyuw@linux.intel.com

drm/i915/gvt: Fix dma-buf display blur issue on CFL

Commit c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
added the support on CFL. The vgpu emulation hotplug support on CFL was
supposed to be included in that patch. Without the vgpu emulation
hotplug support, the dma-buf based display gives us a blur face.

So fix this issue by adding the vgpu emulation hotplug support on CFL.

Fixes: c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com

drm/i915/gvt: Fix drm_WARN issue where vgpu ptr is unavailable

When vgpu ptr is unavailable, the drm_WARN* can hang the whole system
due to the drm pointer is NULL. This patch fixes this issue by using
WARN directly which won't care about the drm pointer.

Fixes: 12d5861973c70 ("drm/i915/gvt: Make WARN* drm specific where vgpu ptr is available")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-1-tina.zhang@intel.com

drm/i915/gvt: Make WARN* drm specific where vgpu ptr is available

Drm specific drm_WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@@
identifier func, T;
@@
func(struct intel_vgpu *T,...) {
+struct drm_i915_private *i915 = T->gvt->dev_priv;
<+...
(
-WARN(
+drm_WARN(&i915->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&i915->drm,
...)
)
...+>

}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200220165507.16823-9-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/gvt: Make WARN* drm specific where drm_priv ptr is available

drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_i915_private struct pointer is
readily available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200220165507.16823-8-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/gvt: make gvt oblivious of kvmgt data structures

Instead of defining KVMGT per-device state in struct intel_vgpu
directly, add an indirection. This makes the GVT code oblivious of
what state KVMGT needs to keep.

The intention here is to eventually make it possible to build
hypervisor backends for the mediator, without having to touch the
mediator itself. This is a first step.

v2:
- rebased onto gvt-staging (no conflicts)

Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200217163858.26496-1-julian.stecklina@cyberus-technology.de

Merge drm-intel-next-queued into gvt-next

Backmerge to pull in
https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/dp: Add all tiled and port sync conns to modeset

If one of the synced crtcs needs a full modeset, we need
to make sure all the synced crtcs are forced a full
modeset.

v3:
* Remove ~BIT(cpu_trans) which is a nop (Ville)
* use get_new_crtc_state and remove error check (Ville)

v2:
* Add tiles based on cpu_trans check (Ville)

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-3-manasi.d.navare@intel.com

drm/i915/dp: Compute port sync crtc states post compute_config()

This patch pushes out the computation of master and slave
transcoders in crtc states after encoder's compute_config hook.
This ensures that the assigned master slave crtcs have exact same
mode and timings which is a requirement for Port sync mode
to be enabled.

v3:
* Make crtc_state const, remove crtc state NULL init (Ville)
v2:
* Correct indentation
* Rename to intel_ddi_port_sync_transcoders (Ville)
* remove unwanted debug (Ville)

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-2-manasi.d.navare@intel.com

drm/i915: Introduce encoder->compute_config_late()

Add an optional secondary encoder state compute hook. This gets
called after the normak .compute_config() has been called for
all the encoders in the state. Thus in the new hook we can rely
on all derived state populated by .compute_config() to be already
set up. Should be useful for MST and port sync master/slave
transcoder selection.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-1-manasi.d.navare@intel.com

drm/i915/gt: Do not attempt to reprogram IA/ring frequencies for dgfx

For dgfx, we do not need to reconfigure the IA/ring frequencies of the
main processors as they are distinct devices.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219130119.1457693-1-chris@chris-wilson.co.uk

drm/i915/selftests: Mark GPR checking more hostile

Currently, we check that a new context has a clear set of general
purpose registers. Add a little bit of hostility by preempting our new
context and re-poisoning the GPR to ensure that there is no context
leakage from preemption.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219123418.1447428-1-chris@chris-wilson.co.uk

drm/i915/selftest: Analyse timestamp behaviour across context switches

Check that the CTX_TIMESTAMP is monotonic across context save/restore
and upon preemption.

References: https://gitlab.freedesktop.org/drm/intel/issues/1233
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219112004.1412791-1-chris@chris-wilson.co.uk

drm/i915: Read rawclk_freq earlier

Read the rawclk_freq during runtime info probing, prior to its first use
in computing the CS timestamp frequency. Then store it in the runtime
info, and include it in the debug printouts.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/834
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216163445.555786-1-chris@chris-wilson.co.uk

drm/i915/gt: Refactor l3cc/mocs availability

On dgfx, we only use l3cc and not mocs, but we share the table
containing both register definitions with Tigerlake. This confuses our
selftest that verifies that both sets of registers do contain the values
in our tables after various events (idling, reset, activity etc).

When constructing the table of register definitions, also include the
flags for which registers are valid so that information is computed
centrally and available to all callers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Brian Welty <brian.welty@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218162150.1300405-10-chris@chris-wilson.co.uk

drm/i915: split i915_driver_modeset_remove() to pre/post irq uninstall

Push irq uninstall further up, by splitting i915_driver_modeset_remove()
to two, the part with working irqs before irq uninstall, and the part
after irq uninstall. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214135058.7580-2-jani.nikula@intel.com

drm/i915: split intel_modeset_driver_remove() to pre/post irq uninstall

Split intel_modeset_driver_remove() to two, the part with working irqs
before irq uninstall, and the part after irq uninstall. Move
irq_unintall() closer to the layer it belongs.

The error path in i915_driver_modeset_probe() looks obviously weird
after this, but remains as good or broken as it ever was. No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214135058.7580-1-jani.nikula@intel.com

drm/i915/gem: use spinlock_t instead of struct spinlock

spinlock_t is one case where the typedef is to be preferred over struct
spinlock.

Fixes: 42fb60de3129 ("drm/i915/gem: Don't leak non-persistent requests on changing engines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200217184219.15325-1-jani.nikula@intel.com

drm/i915/gt: Show the cumulative context runtime in engine debug

As we have the total runtime known to us, show it when dumping the
engine state for debug.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218162150.1300405-2-chris@chris-wilson.co.uk

drm/i915/selftests: Flush tasklet on wait_for_submit()

Always flush the tasklet if we have pending submissions in
wait_for_submit(), so that even if we see the HW has started before we
process its ack, when we return the execlists state is well defined.

Fixes: 06289949b8dd ("drm/i915/selftests: Check for any sign of request starting in wait_for_submit()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218211215.1336341-1-chris@chris-wilson.co.uk

drm/i915/gt: Fix up missing error propagation for heartbeat pulses

Just missed setting err along an interruptible error path for the
intel_engine_pulse().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218162150.1300405-4-chris@chris-wilson.co.uk

drm/i915/selftests: Check for any sign of request starting in wait_for_submit()

We only want to wait until the request has been submitted at least once;
that is it is either in flight, or has been.

References: fcf7df7aae24 ("drm/i915/selftests: Check for the error interrupt before we wait!")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218141305.1258394-1-chris@chris-wilson.co.uk

drm/i915/tgl: Add Wa_1808121037 to tgl.

It's not clear whether this workaround is final yet, but the BSpec
indicates that userspace needs to set bit 9 of this register on demand:

"To avoid sporadic corruptions “Set 0x7010[9] when Depth Buffer
Surface Format is D16_UNORM , surface type is not NULL & 1X_MSAA"

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2501
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
[mattrope: Tweaked comment while applying]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212191728.25227-1-rafael.antognolli@intel.com

drm/i915/display: use intel_de_*() functions for register access

The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().

Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().

No functional changes.

Generated using the following semantic patch:

@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)

@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214140910.23194-2-jani.nikula@intel.com

drm/i915/csr: use intel_de_*() functions for register access

The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().

Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().

No functional changes.

Generated using the following semantic patch:

@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)

@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214140910.23194-1-jani.nikula@intel.com

drm/i915/selftests: Mark the mock ring->vma as being in the GGTT

The ringbuffer's vma is expected to be in the GGTT and that is now being
checked, so make sure the mocked ring declares it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200215205927.4170144-1-chris@chris-wilson.co.uk

drm/i915/gt: Rearrange code to silence compiler

Without selftests enabled, I915_SELFTEST_ONLY becomes a dummy,
generating a bare '0'. This causes the compiler to complain about a
useless line, and while we could use I915_SELFTEST_DECLARE instead, it
is a bit messier. Move the selftest-only code to a helper and make that
conditional on having selftests enabled.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200217095835.599827-1-chris@chris-wilson.co.uk

drm/i915: switch vlv_suspend to use intel uncore register accessors

Prefer intel_uncore_* over I915_READ, I915_WRITE, and POSTING_READ.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212144058.5686-2-jani.nikula@intel.com

drm/i915: split out vlv/chv specific suspend/resume code

i915_drv.c is a fairly big file, and having very specific vlv/chv
suspend/resume code in it is a distraction. Split it out to a new
vlv_suspend.[ch] file.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212144058.5686-1-jani.nikula@intel.com

drm/i915: Update drm/i915 bug filing URL

We've moved from bugzilla to gitlab.

Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-2-jani.nikula@intel.com

MAINTAINERS: Update drm/i915 bug filing URL

We've moved from bugzilla to gitlab.

Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-1-jani.nikula@intel.com

drm/i915: Avoid potential division-by-zero in computing CS timestamp period

Since we use a HW readback or estimation of the CS timestamp frequency,
sometimes it may result in 0. Avoid the division-by-zero in computing
its reciprocal, the timestamp period.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216161746.500258-1-chris@chris-wilson.co.uk

drm/i915: Track hw reported context runtime

GPU saves accumulated context runtime (in CS timestamp units) in PPHWSP
which will be useful for us in cases when we are not able to track context
busyness ourselves (like with GuC). Keep a copy of this in struct
intel_context from where it can be easily read even if the context is not
pinned.

v2:
(Chris)
* Do not store pphwsp address in intel_context.
* Log CS wrap-around.
* Simplify calculation by relying on integer wraparound.
v3:
* Include total/avg in traces and error state for debugging

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216133620.394962-1-chris@chris-wilson.co.uk

drm/i915: Force state->modeset=true when distrust_bios_wm==true

Currently when we load the driver we set distrust_bios_wm=true, which
will cause active_pipe_changes to get flagged even when we're not
toggling any pipes on/off. The reason being that we want to fully
redistribute the dbuf among the active pipes and ignore whatever
state the firmware left behind.

Unfortunately when the code flags active_pipe_changes it doesn't
set state->modeset to true, which means the hardware dbuf state
won't actually get updated. Hence the hardware and software
states go out of sync, which can result in planes trying to use a
disabled dbuf slice. Suprisingly that only seems to corrupt the
display rather than making the whole display engine keel over.

Let's fix this for now by flagging state->modeset whenever
distrust_bios_wm is set.

Eventually we'll likely want to rip out all of this mess and
introduce proper statye tracking for dbuf. But that requires
more work. Toss in a FIXME to that effect.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: ff2cd8635e41 ("drm/i915: Correctly map DBUF slices to pipes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-4-stanislav.lisovskiy@intel.com

drm/i915/dsc: force full modeset whenever DSC is enabled at probe

We lack full state readout of DSC config, which may lead to DSC enable
using a config that's all zeros, failing spectacularly. Force full
modeset and thus compute config at probe to get a sane state, until we
implement DSC state readout. Any fastset that did appear to work with
DSC at probe, worked by coincidence. [1] is an example of a change that
triggered the issue on TGL DSI DSC.

[1] http://patchwork.freedesktop.org/patch/msgid/20200212150102.7600-1-ville.syrjala@linux.intel.com

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: fbacb15ea814 ("drm/i915/dsc: add basic hardware state readout support")
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-3-stanislav.lisovskiy@intel.com

drm/i915: Ensure no conflicts with BIOS when updating Dbuf

TGL BIOS seems to enable both DBuf slices ocasionally, depending
how many displays are connected, while i915 according to BSpec
was powering on S1 DBuf slice, until a modeset was done.

This was causing a brief flash during the boot as we were
disabling slice, previously used by BIOS with that.

To prevent this, now we are ensuring tht we are enabling
_at least_ one slice, but if there are more, let's not
power them off.

Fixes: ff2cd8635e41 ("drm/i915: Correctly map DBUF slices to pipes")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-2-stanislav.lisovskiy@intel.com

drm/i915/mst: Set intel_dp_set_m_n() for MST slaves

Commit 1c9d2eb24153 ("drm/i915: move intel_dp_set_m_n() to encoder for
DDI platforms") moved the intel_dp_set_m_n() from hsw_crtc_enable()
to intel_ddi_pre_enable_dp() but it missed add it to
intel_mst_pre_enable_dp() causing MST slaves to not work.

v2: Not setting intel_ddi_set_dp_msa() twice for MST master

Fixes: 1c9d2eb24153 ("drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms")
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211185008.30806-1-jose.souza@intel.com

drm/i915/selftests: Check for the error interrupt before we wait!

Sometimes the error interrupt can fire even before we have seen the
request go active -- in which case, we end up waiting until the timeout
as the request is already completed. Double check for this case!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214120659.3888735-1-chris@chris-wilson.co.uk

drm/i915: split out display debugfs to a separate file

The i915_debugfs.c has grown more than a little unwieldy. Split out the
display related debugfs code to a file of its own under display/,
initialized with a separate call. No functional changes.

v2:
- Also moved i915_frontbuffer_tracking, i915_gem_framebuffer,
i915_power_domain_info, i915_dmc_info, i915_ipc_status (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211161451.6867-2-jani.nikula@intel.com

drm/i915: move intel_csr.[ch] under display/

The DMC firmware is about display. Move the handling under display. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211161451.6867-1-jani.nikula@intel.com

drm/i915: switch i915_driver_probe() to use i915 local variable

Prefer i915 over dev_priv where possible. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211162802.16180-2-jani.nikula@intel.com

drm/i915: register vga switcheroo later, unregister earlier

Move vga switcheroo and dsm handler register later in
i915_driver_register(), and unregister in i915_driver_unregister(). The
dsm handler unregister is a nop, and is only added for completeness.

My unsubstantiated suspicion is that the vga switcheroo state change
would not work as early as we register the hooks currently. In any case
exposing the interfaces to the world only after we've got everything set
up seems prudent.

Also replace the error handling in vga switcheroo register with a simple
error message. This is done at the same time due to lack of error
propagation from i915_driver_register().

Cc: Lukas Wunner <lukas@wunner.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211162802.16180-1-jani.nikula@intel.com

drm/i915/hdmi: prefer to_i915() over drm->dev_private to get at i915

drm->dev_private is to be avoided. Use to_i915() on the struct
drm_device pointer instead. Rename the affected local dev_priv variables
to i915 while at it.

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211134427.31605-1-jani.nikula@intel.com

drm/i915/selftests: Exercise timeslice rewinding

Originally, I did not expect having to rewind a context upon
timeslicing: the point was to replace the executing context with a
non-executing one! However, given a second context that depends on
requests from the first, we may have to split the requests along the
first context to execute the second, causing us to partially replay the
first context and so have to rewind its RING_TAIL.

References: 5ba32c7be81e ("drm/i915/execlists: Always force a context reload when rewinding RING_TAIL")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140150.3639027-1-chris@chris-wilson.co.uk

drm/i915/gt: Suppress warnings for unused debugging locals

With debugging turned off, we have to tell the compiler not to warn
about the unused debug locals.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213081217.3107410-1-chris@chris-wilson.co.uk

drm/i915: Use engine wa list for Wa_1607090982

This is in mcr range of register, thus we can only verify
it through mmio. Use engine wa list with mcr range verification
skip.

Fixes: 0db1a5f8706a ("drm/i915: Implement Wa_1607090982")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212165707.11143-1-mika.kuoppala@linux.intel.com

drm/i915/gt: Expand bad CS completion event debug

Show the ring/request/context state if we see what we believe is an
early CS completion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211230944.1203098-1-chris@chris-wilson.co.uk

drm/i915/selftests: Avoid choosing zero for phys_sz

Make sure we avoid ending up with a phys_sz of 0, or for phys_sz to be
larger than the actual size.

Closes: https://patchwork.freedesktop.org/series/73320/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212085432.1250807-1-chris@chris-wilson.co.uk

drm/i915/selftests: Sabotague the RING_HEAD

Apply vast quantities of poison and not tell anyone to see if we fall
for the trap of using a stale RING_HEAD.

References: 42827350f75c ("drm/i915/gt: Avoid resetting ring->head outside of its timeline mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211205615.1190127-2-chris@chris-wilson.co.uk

drm/i915: Poison rings after use

On retiring the request, we should not re-use these elements in the ring
(at least not until we fill the ringbuffer and knowingly reuse the space).
Leave behind some poison to (hopefully) trap ourselves if we make a
mistake.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211205615.1190127-1-chris@chris-wilson.co.uk

drm/i915/gem: Don't leak non-persistent requests on changing engines

If we have a set of active engines marked as being non-persistent, we
lose track of those if the user replaces those engines with
I915_CONTEXT_PARAM_ENGINES. As part of our uABI contract is that
non-persistent requests are terminated if they are no longer being
tracked by the user's context (in order to prevent a lost request
causing an untracked and so unstoppable GPU hang), we need to apply the
same context cancellation upon changing engines.

v2: Track stale engines[] so we only reap at context closure.
v3: Tvrtko spotted races with closing contexts and set-engines, so add a
veneer of kill-everything paranoia to clean up after losing a race.

Fixes: a0e047156cde ("drm/i915/gem: Make context persistence optional")
Testcase: igt/gem_ctx_peristence/replace
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211144831.1011498-1-chris@chris-wilson.co.uk

drm/i915: Fix the docs for intel_set_cdclk_post_plane_update()

s/before/after/ again after accidentally changing it the
other way in commit 5604e9ceaed5 ("drm/i915: Simplify
intel_set_cdclk_{pre,post}_plane_update() calling convention")

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204154803.25403-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Don't use uninitialized 'ret'

Accidentally removed the 'ret=0' initialization, and thus
we're potentially looking at some stack garbage here.

The whole 'ret = do_stuff; if (!ret) do_other_stuff;' pattern
confuses my brain so let's replace it with the standard
immediate return thing.

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 28a30b45f5e9 ("drm/i915: Convert cdclk to global state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207152228.1054-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Disable use of hwsp_cacheline for kernel_context

Currently on execlists, we use a local hwsp for the kernel_context,
rather than the engine's HWSP, as this is the default for execlists.
However, seqno wrap requires allocating a new HWSP cacheline, and may
require pinning a new HWSP page in the GGTT. This operation requiring
pinning in the GGTT is not allowed within the kernel_context timeline,
as doing so may require re-entering the kernel_context in order to evict
from the GGTT. As we want to avoid requiring a new HWSP for the
kernel_context, we can use the permanently pinned engine's HWSP instead.
However to do so we must prevent the use of semaphores reading the
kernel_context's HWSP, as the use of semaphores do not support rollover
onto the same cacheline. Fortunately, the kernel_context is mostly
isolated, so unlikely to give benefit to semaphores.

Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210205722.794180-5-chris@chris-wilson.co.uk

drm/i915/selftests: Relax timeout for error-interrupt reset processing

We can not require that the system process a tasklet in reasonable time
(thanks be to ksoftirqd), but we can insist that having waited
sufficiently for the error interrupt to have been raised and having
kicked the tasklet, the reset has begun and the request will be marked
as in error (if not already completed).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210205722.794180-3-chris@chris-wilson.co.uk

drm/i915/dpio_phy: convert to drm_device based logging macros.

Conversion of the printk based logging macros to the struct drm_device
based logging macros in i915/display/intel_dpio_phy.c.
This was achieved using the following coccinelle semantic patch that
matches based on the existence of a drm_i915_private device:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Note that this converts both DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg().
Checkpatch warnings were fixed manually.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-13-wambui.karugax@gmail.com

drm/i915/dsi_vbt: convert to drm_device based logging macros.

Convert various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_dsi_vbt.c.
This also involves extracting the drm_i915_private device from the
intel_dsi type for use in the logging macros.

This converts DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-11-wambui.karugax@gmail.com

drm/i915/combo_phy: convert to struct drm_device logging macros.

Conversion of the printk based drm logging macros to the struct
drm_device based logging macros in i915/display/intel_combo_phy.c.
This transformation was achieved using the following coccinelle script
that matches based on the existence of a drm_i915_private device
pointer:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

This converts DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg().
New checkpatch warnings were addressed manually.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-9-wambui.karugax@gmail.com

drm/i915/dpll_mgr: convert to drm_device based logging macros.

Conversion of instances of printk based drm logging macros to the struct
drm_device based logging macros in i915/display/intel_dpll_mgr.c.
This also involves extracting the struct drm_i915_private device pointer
from various intel types to use in the drm_device based macros.

Note that this converts DRM_DEBUG_DRIVER to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-8-wambui.karugax@gmail.com

drm/i915/crt: automatic conversion to drm_device based logging macros.

Replaces various instances of the printk based logging macros with the
struct drm_device based logging macros in i915/display/intel_crt.c using
the following coccinelle script that matches based on the existence of a
drm_i915_private device pointer:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Checkpatch warnings were addressed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-6-wambui.karugax@gmail.com

drm/i915/color: conversion to drm_device based logging macros.

Initial conversion of the straightforward printk based logging macros to
the struct drm_device based logging macros in
i915/display/intel_color.c.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-5-wambui.karugax@gmail.com

drm/i915/atomic: conversion to drm_device based logging macros.

Conversion of the printk based drm logging macros to the struct
drm_device based logging macros in i915/display/intel_atomic.c
This change was achieved using the following coccinelle script that
matches based on the existence of a drm_i915_private device pointer:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Checkpatch warnings were fixed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-4-wambui.karugax@gmail.com

drm/i915/dp_link_training: convert to drm_device based logging macros.

Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in
i915/display/intel_dp_link_training.c.
This also involves extracting the drm_i915_private device pointer from
the intel_dp type to use in the various macros.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-3-wambui.karugax@gmail.com

drm/i915/gt: Avoid resetting ring->head outside of its timeline mutex

We manipulate ring->head while active in i915_request_retire underneath
the timeline manipulation. We cannot rely on a stable ring->head outside
of the timeline->mutex, in particular while setting up the context for
resume and reset.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1126
Fixes: 0881954965e3 ("drm/i915: Introduce intel_context.pin_mutex for pin management")
Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex")
References: f3c0efc9fe7a ("drm/i915/execlists: Leave resetting ring to intel_ring")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211120131.958949-1-chris@chris-wilson.co.uk

drm/i915: HDCP support on above PORT_E

As Gen12 onwards there are HDCP instances for each transcoder
instead of port, remove the (port < PORT_E) hdcp support
limitation for platform >= Gen12.

v2:
- Nuke the comment and cosmetic changes. [Jani]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207144116.20172-1-anshuman.gupta@intel.com

drm/i915: Skip CPU synchronisation on dmabuf attachments

dma-bufs are device coherent, with explicit CPU synchronisation provided
via the begin/end cpu access ioctls. As the coherency of the dma-buf is
explicitly defined to be under user control, flushing any caches on
attach/detach of the dma-buf is additional work that doesn't aide the
user in the slightest.

Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dongwon Kim <dongwon.kim@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130180702.29357-1-chris@chris-wilson.co.uk

drm/i915/selftests: Trim blitter block size

Reduce the amount of work we do to verify client blt correctness as
currently our 0.5s subtests takes about 15s on slower devices!

v2: Grow the maximum block size until we run out of time

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210231047.810929-1-chris@chris-wilson.co.uk

drm/i915/tgl: Update cdclk voltage level settings

A recent bspec update added an extra voltage level that we didn't have
on ICL and new criteria for selecting the level.

Bspec: 49208
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/ehl: Update port clock voltage level requirements

Voltage level depends not only on the cdclk, but also on the DDI clock.
Last time the bspec voltage level table for EHL was updated, we only
updated the cdclk requirements, but forgot to account for the new port
clock criteria.

Bspec: 21809
Fixes: d147483884ed ("drm/i915/ehl: Update voltage level checks")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/dc3co: Add description of how it works

Add a basic description about how DC3CO works to help people not
familiar with it.

While at it, I also improved the delayed work handle and function
names and removed a debug message that is ambiguous and not much
useful, no changes in behavior here.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205214945.131012-1-jose.souza@intel.com

drm/i915/selftests: Drop live_preempt_hang

live_preempt_hang's use of hang injection has been superseded by
live_preempt_reset's use of an non-preemptible spinner. The latter does
not require intrusive hacks into the code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209230838.361154-2-chris@chris-wilson.co.uk

drm/i915/selftests: Disable capturing forced error states

When we are forcing the error for a selftest, we don't need to capture
the GPU state (typically).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209230838.361154-1-chris@chris-wilson.co.uk

drm/i915/display/ehl: Add HBR2 and HBR3 voltage swing table

EHL only differs from ICL on the voltage swing table for HBR2 and
HBR3.

BSpec: 21257
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205205647.64902-1-jose.souza@intel.com

drm/i915/psr: pass i915 to psr_global_enabled()

Make future work slightly easier.

Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204135217.21974-1-jani.nikula@intel.com

drm/i915/mst: fix pipe and vblank enable

Commit 21fd23ac222f ("drm/i915: move pipe, pch and vblank enable to
encoders on DDI platforms") pushed pipe and vblank enable to encoders on
DDI platforms, however it missed the DP MST encoder. Fix it.

Fixes: 21fd23ac222f ("drm/i915: move pipe, pch and vblank enable to encoders on DDI platforms")
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Tested-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205082959.31317-1-jani.nikula@intel.com

drm/i915/selftests: Remove erroneous intel_engine_pm_put

On an allocation error path for live_hwsp_alternate, we dropped the
engine wakeref before we had even acquired it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209131922.180287-4-chris@chris-wilson.co.uk

drm/i915/execlists: Ignore tracek for nop process_csb

Recording the frequent inspection of CSB head/tail when there is
expected to be no update adds noise to the debug trace. (Not entirely
useless, but since we know the sequence of function calls, we can
surmise the function was called -- so redundant.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209131922.180287-2-chris@chris-wilson.co.uk

drm/i915/gt: Fix hold/unhold recursion

In eliminating the recursion from walking the tree of signalers/waiters
for processing the hold/unhold operations, a crucial error crept in
where we looked at the parent request and not the list element when
processing the list.

Brown paper bag, much?

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1166
Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests")
Fixes: 748317386afb ("drm/i915/execlists: Offline error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209131922.180287-1-chris@chris-wilson.co.uk

drm/i915: Remove lite restore defines

We have switched from tail manipulation to forced context restore
to implement WaIdleLiteRestore. Remove the old defines and comments.

Note: we still do emit the WA tail, and use it as our first attempt to
avoid forcing a full-restore instead of a lite-restore, we just have a
much stronger backup mechanism for repeated preemptions.

References: f26a9e959a7b ("drm/i915/gt: Detect if we miss WaIdleLiteRestore")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203163312.15475-1-mika.kuoppala@linux.intel.com

drm/i915: Never allow userptr into the new mapping types

Commit 4f2a572eda67 ("drm/i915/userptr: Never allow userptr into the
mappable GGTT") made I915_GEM_MMAP_GTT IOCTLs to fail when attempted
on a userptr object in order to protect from a lockdep splat.  Later
on, new mapping types were introduced by commit cc662126b413
("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET").  Those new mapping
types suffer from the same lockdep splat issue but they now succeed
when tried on top of a userptr object.  Fix it.

v2: Don't play with the -ENODEV driver response (Chris)

Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204162302.1299516-1-chris@chris-wilson.co.uk

drm/i915/debugfs: Remove i915_energy_uJ

Last IGT user (intel_gpu_overlay) stopped using it in October 2019 so we
are good to remove the file.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206140725.10973-1-tvrtko.ursulin@linux.intel.com

Merge drm/drm-next into drm-intel-next-queued

Moving the base forward since this one was so old.
New base contains fixes that we needed.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/execlists: Always force a context reload when rewinding RING_TAIL

If we rewind the RING_TAIL on a context, due to a preemption event, we
must force the context restore for the RING_TAIL update to be properly
handled. Rather than note which preemption events may cause us to rewind
the tail, compare the new request's tail with the previously submitted
RING_TAIL, as it turns out that timeslicing was causing unexpected
rewinds.

   <idle>-0       0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3
   <idle>-0       0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964
   <idle>-0       0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695
   <idle>-0       0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
^----  Note we unwind 2 requests from the same context

   <idle>-0       0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
   <idle>-0       0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506
^---- But to apply the new timeslice, we have to replay the first request
      before the new client can start -- the unexpected RING_TAIL rewind

   <idle>-0       0d.s2 1280851219us : trace_ports: 0000:00:02.0 rcs0: submit { 130:4696*, 134:1508 }
synmark2-5425    2..s. 1280851239us : process_csb: 0000:00:02.0 rcs0: cs-irq head=5, tail=0
synmark2-5425    2..s. 1280851240us : process_csb: 0000:00:02.0 rcs0: csb[0]: status=0x00008002:0x00000000
^---- Preemption event for the ELSP update; note the lite-restore

synmark2-5425    2..s. 1280851243us : trace_ports: 0000:00:02.0 rcs0: preempted { 130:4698, 66:119966 }
synmark2-5425    2..s. 1280851246us : trace_ports: 0000:00:02.0 rcs0: promote { 130:4696*, 134:1508 }
synmark2-5425    2.... 1280851462us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4700, current 4695
synmark2-5425    2.... 1280852111us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4702, current 4695
synmark2-5425    2.Ns1 1280852296us : process_csb: 0000:00:02.0 rcs0: cs-irq head=0, tail=2
synmark2-5425    2.Ns1 1280852297us : process_csb: 0000:00:02.0 rcs0: csb[1]: status=0x00000814:0x00000000
synmark2-5425    2.Ns1 1280852299us : trace_ports: 0000:00:02.0 rcs0: completed { 130:4696!, 134:1508 }
synmark2-5425    2.Ns1 1280852301us : process_csb: 0000:00:02.0 rcs0: csb[2]: status=0x00000818:0x00000040
synmark2-5425    2.Ns1 1280852302us : trace_ports: 0000:00:02.0 rcs0: completed { 134:1508, 0:0 }
synmark2-5425    2.Ns1 1280852313us : process_csb: process_csb:2336 GEM_BUG_ON(!i915_request_completed(*execlists->active) && !reset_in_progress(execlists))

Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Referenecs: 82c69bf58650 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20200207211452.2860634-1-chris@chris-wilson.co.uk

drm/i915/gt: Only ignore already reset requests

If a request is being re-run after an innocent reset, it is marked as
-EAGAIN. So only skip an engine reset if the request is marked as -EIO.

Testcase: igt/gem_ctx_exec/basic-nohangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207161602.2838218-1-chris@chris-wilson.co.uk

drm/i915: Implement Wa_1607090982

SIMD16 with Src0 scalar might conflict between Src1/Src2 and cause
GRF read issue. Workaround this issue by setting bit 14 in 0xe4f4
which will disable early read/src swap of Src0.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207155138.30978-2-mika.kuoppala@linux.intel.com

drm/i915: Disable tesselation clock gating on tgl A0

Disable TEDOP clock gating flow by programming 0x20A0[19] = 1

References: HSDES#1407928979
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207155138.30978-1-mika.kuoppala@linux.intel.com

drm/i915/gt: Use the kernel_context to measure the breadcrumb size

We set up a dummy ring in order to measure the size we require for our
breadcrumb emission, so that we don't have to manually count dwords! We
can pass in the kernel_context to use for this so that if required it is
known for the breadcrumb emitter, and we can reuse some details from the
kernel_context to reduce the number of temporaries we have to mock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207125827.2787472-1-chris@chris-wilson.co.uk

drm/i915: Fix force-probe failure message

Do not try and dereference the i915 private before it has been allocated
and attached to the drvdata!

Fixes: 7daac72e9a3f ("drm/i915/pci: conversion to drm_device based logging macros.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207135048.2788199-1-chris@chris-wilson.co.uk

drm/i915/guc: Make sure to sanitize CT status

We are sanitizing firmware status and old mmio message, but
we forget to sanitize CT status.

Fixes: e85de1770385 ("drm/i915/guc: Introduce guc_is_ready")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207131938.2787828-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/gt: Protect execlists_hold/unhold from new waiters

As we may add new waiters to a request as it is being run, we need to
mark the list iteration as being safe for concurrent addition.

v2: Mika spotted that we used the same trick for signalers_list, so warn
the compiler about the lockless walk there as well.

Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207110213.2734386-1-chris@chris-wilson.co.uk

Revert "drm/i915: Don't use VBT for detecting DPCD backlight controls"

This reverts commit d2a4bb6f8bc8cf2d788adf7e59b5b52fe3a3333c.

So, turns out that this ended up just breaking things. While many
laptops incorrectly advertise themselves as supporting PWM backlight
controls, they actually will only work with DPCD backlight controls.
Unfortunately, it also seems there are a number of systems which
advertise DPCD backlight controls in their eDP DPCD but don't actually
support them. Talking with some laptop manufacturers has shown it might
be possible to probe this support via the EDID (!?!?) but I haven't been
able to confirm that this would work on any other manufacturer's
systems.

So in the mean time, we'll just revert this commit for now and go back
to the old way of doing things.

Fixes: d2a4bb6f8bc8 ("drm/i915: Don't use VBT for detecting DPCD backlight controls")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204192823.111404-2-lyude@redhat.com

drm/i915/gt: Protect defer_request() from new waiters

Mika spotted

<4>[17436.705441] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4>[17436.705447] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.5.0+ #1
<4>[17436.705449] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3805 05/16/2018
<4>[17436.705512] RIP: 0010:__execlists_submission_tasklet+0xc4d/0x16e0 [i915]
<4>[17436.705516] Code: c5 4c 8d 60 e0 75 17 e9 8c 07 00 00 49 8b 44 24 20 49 39 c5 4c 8d 60 e0 0f 84 7a 07 00 00 49 8b 5c 24 08 49 8b 87 80 00 00 00 <48> 39 83 d8 fe ff ff 75 d9 48 8b 83 88 fe ff ff a8 01 0f 84 b6 05
<4>[17436.705518] RSP: 0018:ffffc9000012ce80 EFLAGS: 00010083
<4>[17436.705521] RAX: ffff88822ae42000 RBX: 5a5a5a5a5a5a5a5a RCX: dead000000000122
<4>[17436.705523] RDX: ffff88822ae42588 RSI: ffff8881e32a7908 RDI: ffff8881c429fd48
<4>[17436.705525] RBP: ffffc9000012cf00 R08: ffff88822ae42588 R09: 00000000fffffffe
<4>[17436.705527] R10: ffff8881c429fb80 R11: 00000000a677cf08 R12: ffff8881c42a0aa8
<4>[17436.705529] R13: ffff8881c429fd38 R14: ffff88822ae42588 R15: ffff8881c429fb80
<4>[17436.705532] FS:  0000000000000000(0000) GS:ffff88822ed00000(0000) knlGS:0000000000000000
<4>[17436.705534] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[17436.705536] CR2: 00007f858c76d000 CR3: 0000000005610003 CR4: 00000000003606e0
<4>[17436.705538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[17436.705540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
<4>[17436.705542] Call Trace:
<4>[17436.705545]  <IRQ>
<4>[17436.705603]  execlists_submission_tasklet+0xc0/0x130 [i915]

which is us consuming a partially initialised new waiter in
defer_requests(). We can prevent this by initialising the i915_dependency
prior to making it visible, and since we are using a concurrent
list_add/iterator mark them up to the compiler.

Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-2-chris@chris-wilson.co.uk

drm/i915/gt: Prevent queuing retire workers on the virtual engine

Virtual engines are fleeting. They carry a reference count and may be freed
when their last request is retired. This makes them unsuitable for the
task of housing engine->retire.work so assert that it is not used.

Tvrtko tracked down an instance where we did indeed violate this rule.
In virtual_submit_request, we flush a completed request directly with
__i915_request_submit and this causes us to queue that request on the
veng's breadcrumb list and signal it. Leading us down a path where we
should not attach the retire.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dc93c9b69315 ("drm/i915/gt: Schedule request retirement when signaler idles")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-1-chris@chris-wilson.co.uk

Merge tag 'amd-drm-next-5.6-2020-02-05' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.6-2020-02-05:

amdgpu:
- EDC fixes for Arcturus
- GDDR6 memory training fixe
- Fix for reading gfx clockgating registers while in GFXOFF state
- i2c freq fixes
- Misc display fixes
- TLB invalidation fix when using semaphores
- VCN 2.5 instancing fixes
- Switch raven1 gfxoff to a blacklist
- Coreboot workaround for KV/KB
- Root cause dongle fixes for display and revert workaround
- Enable GPU reset for renoir and navi
- Navi overclocking fixes
- Fix up confusing warnings in display clock validation on raven

amdkfd:
- SDMA fix

radeon:
- Misc LUT fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206035458.3894-1-alexander.deucher@amd.com

Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-next

Just a couple of fixes to Volta/Turing modesetting on some systems.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

Merge tag 'drm/tegra/for-5.6-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Fixes for v5.6-rc1

These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206172753.2185390-1-thierry.reding@gmail.com

drm/i915/selftests: drop igt_ppgtt_exhaust_huge

We already have tests that exhaustively exercise the most interesting
page-size combinations, along with tests that offer randomisation, and
so we should already be testing objects(local, system) with a varying
mix of page-sizes, which leaves igt_ppgtt_exhaust_huge providing not
much in terms of extra coverage.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206170340.102613-1-matthew.auld@intel.com

drm/i915/display: Set TRANS_DDI_MODE_SELECT to default value when clearing DDI select

TGL is suffering of timeouts and fifo underruns when disabling
transcoder in MST mode, this is fixed by set TRANS_DDI_MODE_SELECT to
0(HDMI mode) when clearing DDI select.

Although BSpec disable sequence don't require this step, it is a
harmless change and it is also done by Windows driver.
Anyhow HW team was notified about that but it can take some time to
documentation to be updated.

A case that always lead to those issues is:
- do a modeset enabling pipe A and pipe B in the same MST stream
leaving A as master
- disable pipe A, promote B as master doing a full modeset in A
- enable pipe A, changing the master transcoder back to A(doing a
full modeset in B)
- Pow: underruns and timeouts

The transcoders involved will only work again when complete disabled
and their power wells turned off causing a reset in their registers.

v2: Setting TRANS_DDI_MODE_SELECT to default when clearing DDI select
not anymore when disabling TRANS_DDI, both work but this one looks
more safe. (Ville comment)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203225549.152301-1-jose.souza@intel.com