Malcolm Priestley [Sun, 8 Dec 2013 09:11:30 +0000 (09:11 +0000)]
staging: vt6656: [BUG] BBvUpdatePreEDThreshold Always set sensitivity on bScanning
byBBPreEDIndex value is initially 0, this means that from
cold BBvUpdatePreEDThreshold is never set.
This means that sensitivity may be in an ambiguous state,
failing to scan any wireless points or at least distant ones.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 9 Dec 2013 22:30:14 +0000 (22:30 +0000)]
staging: vt6656: Replace pStatistic->abyTxPktInfo with struct vnt_tx_pkt_info
Change s_vSaveTxPktInfo and BSSvUpdateNodeTxCounter to use vnt_tx_pkt_info
relayed to BSSvUpdateNodeTxCounter via INTnsProcessData.
pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni is unused and discarded.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 9 Dec 2013 22:28:24 +0000 (22:28 +0000)]
staging: vt6656: s_uCalculateLinkQual use netstats rx values
Use netstats rx_packets and rx_frame_errors.
Add frame errors to RXbBulkInProcessData
The current scStatistic.RxFcsErrCnt only records
USB errors not frame errors.
The scStatistic.RxOkCnt only recorded successful USB
transfers not actual successfully received packets.
So a more accurate reading is to use netstats rx_packets and
rx_frame_errors.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 9 Dec 2013 22:25:48 +0000 (22:25 +0000)]
staging: vt6656: Get wireless stats qual.qual directly from s_uCalculateLinkQual
Calculate the qual from the tx_packets and wstats.discard.retries and
apply to wstats.qual.qual
Discard pDevice->scStatistic.LinkQuality.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 9 Dec 2013 22:23:19 +0000 (22:23 +0000)]
staging: vt6656: Remove STAvUpdateTDStatCounter and apply directly to stats
Apply directly to net_device_stats and wireless stats.
tx_bytes are relayed from s_vSaveTxPktInfo via scStatistic,
so collect them there.
All other statistics in STAvUpdateTDStatCounter are dead code
and don't reach user.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Mon, 9 Dec 2013 11:38:30 +0000 (19:38 +0800)]
staging: et131x: remove unnecessary pointer typecast
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Mon, 9 Dec 2013 11:38:29 +0000 (19:38 +0800)]
staging: et131x: remove item that have been done in TODO file
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Mon, 9 Dec 2013 11:38:28 +0000 (19:38 +0800)]
staging: et131x: reduce split lines in nic_rx_pkts
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Mon, 9 Dec 2013 11:38:27 +0000 (19:38 +0800)]
staging: et131x: reduce split lines in nic_return_rfd
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Mon, 9 Dec 2013 11:38:26 +0000 (19:38 +0800)]
staging: et131x: reduce split lines in et131x_rx_dma_memory_free
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Mon, 9 Dec 2013 11:38:25 +0000 (19:38 +0800)]
staging: et131x: reduce split lines in et131x_rx_dma_memory_alloc
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Mon, 9 Dec 2013 11:38:24 +0000 (19:38 +0800)]
staging: et131x: reduce split lines in et131x_config_rx_dma_regs
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Gortmaker [Tue, 10 Dec 2013 20:36:50 +0000 (15:36 -0500)]
lustre: delete pointless wait queue related casts.
These serve no purpose at all, and can only mask real type
clash issues that one would want to actually see.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikhail Pershin [Mon, 9 Dec 2013 14:56:57 +0000 (22:56 +0800)]
staging/lustre/seq: remove seq_{query,handle}
This is only part of the original Lustre tree commit. Main part of the
original commit modifies server side code.
Lustre-change: http://review.whamcloud.com/6765
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikhail Pershin [Mon, 9 Dec 2013 14:56:56 +0000 (22:56 +0800)]
staging/lustre/target: move OUT to the unified target code
- Move OUT handler to the unified target code, so it can be
used by both MDS and OST.
Lustre-change: http://review.whamcloud.com/6763
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
[pick client side of change. target is mostly server side code -- PengTao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JC Lafoucriere [Mon, 9 Dec 2013 14:56:55 +0000 (22:56 +0800)]
staging/lustre/api: HSM import uses new released pattern
Import creates a released file using new RAID pattern flag
Import used a new ioctl() to implement the import in the
client kernel.
Lustre-change: http://review.whamcloud.com/6536
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3363
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
[Fix up kuid_t/guid_t conversion in llite/file.c -- Peng Tao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Oucharek [Mon, 9 Dec 2013 14:56:54 +0000 (22:56 +0800)]
staging/lustre/lnet: Add LNet Router Priority parameter
This change adds a priority parameter to the route module settings.
This paramter can be >= 0. Like hops, the lower the prioirty number
the higher the priority. So lower numbered priorities will be
selected over higher numbers.
Lustre-change: http://review.whamcloud.com/5663
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2934
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Mon, 9 Dec 2013 14:56:53 +0000 (22:56 +0800)]
staging/lustre: remove server macros from lustre_net.h
These macros are only used on server side.
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nitin Cupta [Wed, 11 Dec 2013 02:04:37 +0000 (11:04 +0900)]
zsmalloc: add more comment
This patch adds lots of comments and it will help others
to review and enhance.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minchan Kim [Wed, 11 Dec 2013 02:04:36 +0000 (11:04 +0900)]
zsmalloc: add Kconfig for enabling page table method
Zsmalloc has two methods 1) copy-based and 2) pte based to
access objects that span two pages.
You can see history why we supported two approach from [1].
But it was bad choice that adding hard coding to select arch
which want to use pte based method because there are lots of
SoC in an architecure and they can have different cache size,
CPU speed and so on so it would be better to expose it to user
as selectable Kconfig option like Andrew Morton suggested.
[1] https://lkml.org/lkml/2012/7/11/58
Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 9 Dec 2013 01:33:16 +0000 (17:33 -0800)]
staging: btmtk_usb: remove driver
No one seems to be working on it anymore, and it really should be merged
into the already-existing btusb driver. Also, there is not any proper
author attribution on the code (it was copied from the in-kernel
driver...)
If someone wants to pick this back up, we can easily revert this, but
for now, delete the driver.
Cc: Yu-Chen, Cho <acho@suse.com>
Cc: Jay Hung <jay.hung@mediatek.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Dodge [Sat, 7 Dec 2013 08:36:32 +0000 (03:36 -0500)]
Drivers: Staging: ft1000: Fixed C99 // comments styling issue
This patch removes C99 style comments from the driver and whenever
possible attempts to match coding style of the rest of the driver.
Signed-off-by: Daniel Dodge <danieldodgese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sat, 7 Dec 2013 11:40:28 +0000 (11:40 +0000)]
staging: vt6656: baseband.c clean up BBbVT3184Init
White space clean up and remove camel case from variables.
pDevice-> priv
ntStatus -> status
wLength ->length
pbyAddr -> addr
pbyAgc -> agc
wLengthAgc ->length_agc
abyArray -> array
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Hudson [Fri, 6 Dec 2013 22:01:44 +0000 (14:01 -0800)]
staging: dwc2: don't issue traffic to LS devices in FS mode
I fell over the problem reported in
https://github.com/raspberrypi/linux/pull/390:
"Issuing low-speed packets when the root port is in full-speed mode
causes the root port to stop responding. Explicitly fail when
enqueuing URBs to a LS endpoint on a FS bus."
with my dwc2 testing in NetBSD, so I adapted the change to dwc2.
Signed-off-by: Nick Hudson <skrll@netbsd.org>
[paulz: fixed up the patch to compile under Linux, and tested it]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Fri, 29 Nov 2013 10:46:32 +0000 (08:46 -0200)]
imx-drm: Add mx6 hdmi transmitter support
Add mx6 hdmi transmitter support.
Original work has been done by Sascha Hauer and Tony Prisk.
Special thanks to Russell King for his carefully review, many bug fixes and
testing of the mx6 HDMI driver.
Tested on the following boards:
- mx6q sabresd
- mx6dl sabresd
- mx6solo wandboard
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:16 +0000 (16:54 -0700)]
staging: comedi: pcmuio: tidy up pcmuio_start_intr()
Refactor this function a bit to remove the need for an extra indent
level and cleanup some of the odd line breaks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:15 +0000 (16:54 -0700)]
staging: comedi: pcmuio: tidy up pcmuio_attach()
Clean up the local variables, 'sdev_no' and 'asic' are both used in
simple for () loops. Use the local variable 'i' for both cases. The
'n_subdevs' variable is only used in one place, just remove it.
For aesthetics, add some whitespace to the subdevice init and reorder
it to follow the more typical style in comedi drivers.
Remove the unnecessary init of s->len_chanlist for subdevices that do
not support async commands (interrupts). The core will default it to
the correct value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:14 +0000 (16:54 -0700)]
staging: comedi: pcmuio: remove unneeded include
The <linux/slab.h> header is no longer needed by this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:12 +0000 (16:54 -0700)]
staging: comedi: pcmuio: fix types of some private data variables
The 'enabled_mask' is a bit mask of the channels that are enabled
for interrupt detection and should be an unsigned int.
The 'stop_count' is a >= 0 value that is set by the unsigned int
cmd->stop_arg. Make it an unsigned int.
The 'active' and 'continuous' members are flags. Make them unsigned
int bit-fields to save a bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:11 +0000 (16:54 -0700)]
staging: comedi: pcmuio: document the spinlock_t variables
Add some comments about the two spinlock_t variables in the private
data. Also, add come comments for the functions that do not need to
lock/unlock the spinlock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:10 +0000 (16:54 -0700)]
staging: comedi: pcmuio: add inline helpers to get the 'iobase', 'asic', and 'port'
To reduce the potential for bugs, and better document the code, introduce
some inline helper functions to consolidate the calculations needed to get
the 'iobase' for a given asic and the 'asic' and 'port' associated with a
given subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:09 +0000 (16:54 -0700)]
staging: comedi: pcmuio: remove unnecessary mask of triggered channels
The 'triggered' value is read directly from the three trigger id
registers and does not have any extra data that needs masked off.
Remove the 'mytrig' local variable and just use 'triggered' directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:08 +0000 (16:54 -0700)]
staging: comedi: pcmuio: fix pcmuio_dio_insn_bits()
This dio subdevice (*insn_bits) function does not follow the "norm"
for comedi drivers. It also _appears_ to return the incorrect state
of the channels.
Use the comedi_dio_update_state() helper to handle the boilerplate
for updating the output channel state. Due to the hardware we then
need to invert the state and mask the input channels before updating
the outputs.
Then read the hardware and invert the result to get the current true
state of the dio channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:07 +0000 (16:54 -0700)]
staging: comedi: pcmuio: remove subdevice private data
The subdevice private data is only needed for each 'asic' not for each
subdevice. Since the 'asic' can be calculated easily from the subdevice
we can merge the subdevice private data members directly into the
private data.
This removes the need to kcalloc/free the subdevice private data and
saves a bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:06 +0000 (16:54 -0700)]
staging: comedi: pcmuio: remove 'asic' member from subdevice private data
The 'asic' associated with a subdevice can be easily calculated. The
functions that use this member in the subdevice private data can only
be called by the subdevices that support interrupts. Just calculate
the 'asic' when needed and remove the member variable and sanity checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 6 Dec 2013 16:43:02 +0000 (09:43 -0700)]
staging: comedi: pcmuio: tidy up pcmuio_handle_asic_interrupt()
Unfortunatly, since there could be two asics, we can't use dev->read_subdev
to get the subdevice. But, the comedi_subdevice associated with the 'asic'
can easily be calculated. This allows removing the for () loop that searched
for the correct subdevice.
Tidy up the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:04 +0000 (16:54 -0700)]
staging: comedi: pcmuio: spinlock protect pcmuio_{write, read}()
Currently only the pcmuio_handle_asic_interrupt() function uses the
spinlock in the private data to protect the read of the paged interrupt
id registers. All accesses to the paged registers should be protected
to ensure that the page is not changed until the access is complete.
Move the lock/unlock into the pcmuio_{write,read}() functions to make
sure the access completes correctly. Rename the spinlock to variable
to clarify its use.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 23:54:03 +0000 (16:54 -0700)]
staging: comedi: pcmuio: fix interrupt requests
Legacy (ISA) interrupts are not sharable so this driver should not
be passing the IRQF_SHARED flag when requesting the interrupts.
This driver supports two board types:
PCM-UIO48 with one asic (one interrupt source)
PCM-UIO96 with two asics (two interrupt sources)
The PCM-UIO96 has a jumper that allows the two interrupt sources to
share an interrupt. This is safe for legacy interrupts as long as
the "shared" interrupt is handled by a single driver.
Modify the request_irq() code in this driver to correctly request the
interrupts. For the PCM-UI048 case (one asic) only one request_irq()
is needed. For the PCM-UIO96 (two asics) there are three cases:
1) irq is shared, one request_irq() call
2) only one asic has an irq, one request_irq() call
3) two irqs, two request_irq() calls
The irq for the first asic (dev->irq) will be requested during the
attach if required. The comedi core will handle the freeing of this
irq during the detach.
The irq for the second asic (devpriv->irq2) will also be requested
during the attach if required. The freeing of this irq will be
handled by the driver during the detach.
Move the board reset and interrupt request code so it occurs early
in the attach. We can then check dev->irq and devpriv->irq2 to see
if the subdevice command support actually needs to be initialized.
This also simplifies the interrupt handler. The irq can be simply
checked against dev->irq and devpriv->irq2 to see which asic caused
the interrupt.
Add a call to pcmuio_reset() in the (*detach) to make sure the
interrupts are disabled before freeing the irqs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:49 +0000 (13:43 -0700)]
staging: comedi: ni_pcidio: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:48 +0000 (13:43 -0700)]
staging: comedi: ni_pcidio: factor board reset out of attach
Factor the code that resets the board and disables the interrupts out
of the attach.
Move the reset so it happens before the subdevices are initialized.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:47 +0000 (13:43 -0700)]
staging: comedi: rtd520: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:46 +0000 (13:43 -0700)]
staging: comedi: ni_atmio16d: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:45 +0000 (13:43 -0700)]
staging: comedi: ni_65xx: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:44 +0000 (13:43 -0700)]
staging: comedi: amplc_pci224: use dev->write_subdev
Use the dev->write_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:43 +0000 (13:43 -0700)]
staging: comedi: amplc_pc236: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:42 +0000 (13:43 -0700)]
staging: comedi: adl_pci9118: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:41 +0000 (13:43 -0700)]
staging: comedi: hwrdv_apci3200: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:40 +0000 (13:43 -0700)]
staging: comedi: hwrdv_apci3120: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:39 +0000 (13:43 -0700)]
staging: comedi: s626: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:38 +0000 (13:43 -0700)]
staging: comedi: dt3000: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:37 +0000 (13:43 -0700)]
staging: comedi: dt3000: don't fail attach if irq is not available
The irq is only needed to support async commands. Don't fail the attach
if it is not available.
Only hook up the command support if the request_irq() was successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:36 +0000 (13:43 -0700)]
staging: comedi: adv_pci1710: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:35 +0000 (13:43 -0700)]
staging: comedi: adv_pci1710: only init async command members when needed
The 'len_chanlist' and 'cancel' members of the comedi_subdevice are
only used with async command support. Only initialize them if the irq
was sucessfully requested.
Also, only init the dev->read_subdev if we have the irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:34 +0000 (13:43 -0700)]
staging: comedi: adl_pci9118: tidy up irq request
Clean up the irq request in the attach of this driver and remove the
dev_{level} noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:33 +0000 (13:43 -0700)]
staging: comedi: amplc_pci230: tidy up irq request
Clean up the irq request in the attach of this driver and remove the
dev_{level} noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:32 +0000 (13:43 -0700)]
staging: comedi: dt282x: use dev->write_subdev
Use the dev->write_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:31 +0000 (13:43 -0700)]
staging: comedi: dt282x: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:30 +0000 (13:43 -0700)]
staging: comedi: dt2814: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:29 +0000 (13:43 -0700)]
staging: comedi: adl_pci9111: the irq is only needed for async command support
An irq is only needed for async command support, modify the attach of
the subdevices so that the command support is only hooked up if the irq
request was successful. Remove the then unnecessary sanity check in
pci9111_ai_do_cmd().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:28 +0000 (13:43 -0700)]
staging: comedi: adl_pci9111: fix incorrect irq passed to request_irq()
The dev->irq passed to request_irq() will always be 0 when the auto_attach
function is called. The pcidev->irq should be used instead to get the correct
irq number.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:27 +0000 (13:43 -0700)]
staging: comedi: das16m1: remove unnecessary 'dev->irq' test
This function can only be called if the irq was sucessfully requested.
The dev->irq will always be valid.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:26 +0000 (13:43 -0700)]
staging: comedi: das1800: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:25 +0000 (13:43 -0700)]
staging: comedi: das1800: tidy up irq request
This driver only needs an irq in order to support async commands.
If the irq is not available the driver will still function for
single analog input reads.
Tidy up the code that does the irq requests so that the driver
will still attach if it is not avaliable.
Remove the noise about the irq during the attach.
Only hook up the async commands support if the irq is available.
Remove the then unnecessary sanity check in das1800_ai_do_cmd().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:24 +0000 (13:43 -0700)]
staging: comedi: me4000: remove unnecessary check in the irq handler
The sanity check of the irq is not necessary. If it _is_ wrong we have
bigger problems in the kernel...
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:23 +0000 (13:43 -0700)]
staging: comedi: me4000: refactor request_irq() during attach
Do the request_irq() before setting up the subdevices. This removes an
indent level and makes the code a bit cleaner.
Also, remove the dev_warn() noise about the irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:22 +0000 (13:43 -0700)]
staging: comedi: me4000: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Dec 2013 20:43:21 +0000 (13:43 -0700)]
staging: comedi: ni_at_2150: tidy up irq/dma request
This driver needs both an irq and dma in order to support async
commands. If the irq and dma are not available the driver will
still function for single analog input reads.
Tidy up the code that does the irq and dma requests so that the
driver will still attach if they are not avaliable. The attach
will still fail, with -ENOMEM, if the dma buffer cannot be allocated.
Remove the noise about the irq and dma during the attach.
Only hook up the async commands support if the irq and dma are
available. Remove the then unnecessary sanity check in a2150_ai_cmd().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Domínguez [Thu, 5 Dec 2013 16:16:13 +0000 (16:16 +0000)]
staging: lustre: lnet: lnet: fixed space coding style issues
Fixed a coding style issue with spaces between function names and arguments:
func (x) -> func(x)
Signed-off-by: Samuel Dominguez <samuel.dominguez.lorenzo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Fri, 6 Dec 2013 14:27:55 +0000 (23:27 +0900)]
staging: crystalhd: Fix typo in crystalhd
Correct spelling typo.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Thu, 5 Dec 2013 23:57:26 +0000 (15:57 -0800)]
staging: slicoss: Remove last reference to compare_ether_addr
And use the normal is_<foo>_ether_addr functions and ETH_ALEN too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 5 Dec 2013 22:37:46 +0000 (22:37 +0000)]
staging: et131x: trivial whitespace and line / character reductions
Tweak some whitespace, also remove a few redundant lines and
characters (mainly of type 'if (status != 0)' -> 'if (status)').
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 5 Dec 2013 22:37:45 +0000 (22:37 +0000)]
staging: et131x: remove unhelpful comments
Get rid of some of the more unhelpful comments.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 5 Dec 2013 22:37:44 +0000 (22:37 +0000)]
staging: et131x: remove two useless debug statements
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 5 Dec 2013 22:37:43 +0000 (22:37 +0000)]
staging: et131x: clear up use of TRUEPHY defines
There are a large number of TRUEPHY defines in the driver, all of which
are unused or unnecessary. Remove / replace these.
As this results in et1310_phy_access_mii_bit() only being used for
reading bits, also change it's name to et1310_phy_read_mii_bit().
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 5 Dec 2013 22:55:49 +0000 (22:55 +0000)]
staging: et131x: replace magic number bitmask with defined values
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 5 Dec 2013 22:37:41 +0000 (22:37 +0000)]
staging: et131x: Remove unnecessary phydev checks
Several checks for a valid adapter->phydev pointer are made where the
pointer has already been checked previously in the code path.
Remove these redundant checks.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 5 Dec 2013 22:37:40 +0000 (22:37 +0000)]
staging: et131x: improve indenting in et131x_adjust_link()
Negate some 'if' checks to return early, allowing a large block of code
to be un-indented.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Warren [Wed, 4 Dec 2013 03:56:05 +0000 (20:56 -0700)]
staging: dwc2: disable uframe_sched on the bcm2835
While Paul said that .uframe_sched should be enabled on the BCM2835,
and doing so works fine with the built-in wired Ethernet, it prevents
my WiFi dongle from operating correctly. Hence, disable the option so
that everything works.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 17:54:59 +0000 (01:54 +0800)]
staging/lustre: don't compile procfs code when CONFIG_PROC_FS is off
The patch changes to conditionally compile procfs related source files.
This includes lproc_fid.c, lproc_fld.c, lproc_lov.c, lvfs_lib.c, lproc_mdc.c,
lproc_mgc.c, lprocfs_status.c, lproc_osc.c and sec_lproc.c.
There is a checkpatch warning about usage of simple_strtoul() in the patch.
But it needs to be fixed in a separate patch because it is not related to
CONFIG_PROC_FS breakage here.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 17:54:58 +0000 (01:54 +0800)]
staging/lustre: fix undefined reference if CONFIG_PROC_FS is off
When building Lustre with CONFIG_PROC_FS off, we'll get many errors like:
drivers/staging/lustre/lustre/obdclass/llog_test.c:1053: error: implicit declaration of function ‘lprocfs_llog_test_init_vars’
make[3]: *** [drivers/staging/lustre/lustre/obdclass/llog_test.o] Error 1
make[2]: *** [drivers/staging/lustre/lustre/obdclass] Error 2
make[2]: *** Waiting for unfinished jobs....
CC [M] drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.o
drivers/staging/lustre/lustre/ptlrpc/pinger.c: In function ‘ptlrpc_pinger_main’:
drivers/staging/lustre/lustre/ptlrpc/pinger.c:331: error: implicit declaration of function ‘obd_update_maxusage’
The patch defines following symbols when CONFIG_PROC_FS is off:
fld_type_proc_dir, obd_update_maxusage(), obd_max_pages, obd_max_alloc, obd_alloc,
obd_pages, lprocfs_llog_test_init_vars().
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 17:54:57 +0000 (01:54 +0800)]
staging/lustre/llite: remove ll_file_get_iov_count
It exactly copies generic_segment_checks() except wrongly calling
access_ok(VERIFY_READ) for aio read range. Drop it and just call
generic_segment_checks() instead.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 17:54:56 +0000 (01:54 +0800)]
staging/lustre: fix build error in ll_setxattr_common
With CONFIG_FS_POSIX_ACL off, we'll get
drivers/staging/lustre/lustre/llite/xattr.c: In function ‘ll_setxattr_common’:
drivers/staging/lustre/lustre/llite/xattr.c:187:7: error: ‘rce’ undeclared (first use in this function)
drivers/staging/lustre/lustre/llite/xattr.c:187:7: note: each undeclared identifier is reported only once for each function it appears in
It was introduced by
7fc1f83 (staging/lustre/llite: extended attribute cache)
that added new reference but didn't take care of CONFIG_FS_POSIX_ACL.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:26 +0000 (12:07 -0700)]
staging: comedi: ni_pcidio: tidy up the irq request
The irq is only needed to support async commands. Tidy up the
code that does the request_irq() and remove the noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:25 +0000 (12:07 -0700)]
staging: comedi: ni_pcimio: tidy up the irq request
The irq is only needed to support async commands. Tidy up the
code that does the request_irq() and remove the noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:24 +0000 (12:07 -0700)]
staging: comedi: pcl812: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:23 +0000 (12:07 -0700)]
staging: comedi: pcl812: only init async command members when needed
The 'len_chanlist' and 'cancel' members of the comedi_subdevice are
only used with async command support. Only initialize them if the irq
was sucessfully requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:22 +0000 (12:07 -0700)]
staging: comedi: pcl812: remove unnecessary s->len_chanlist init
The subdevice 'len_chanlist' member is only used with async command
support. Remove the initialization of this member for the subdevices
that do not support commands. The core will then correctly initialize
it to the default value of '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:21 +0000 (12:07 -0700)]
staging: comedi: pcl818: remove unnecessary s->len_chanlist init
The subdevice 'len_chanlist' member is only used with async command
support. Remove the initialization of this member for the subdevices
that do not support commands. The core will then correctly initialize
it to the default value of '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:20 +0000 (12:07 -0700)]
staging: comedi: pcl818: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:19 +0000 (12:07 -0700)]
staging: comedi: pcl818: remove 'sub_ai' from private data
This member of the private data is a duplicate of the comedi_device
'read_subdev' member. Remove the private data member and use the
comedi_device member instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:18 +0000 (12:07 -0700)]
staging: comedi: pcl818: only init async command members when needed
The 'len_chanlist' and 'cancel' members of the comedi_subdevice are
only used with async command support. Only initialize them if the irq
was sucessfully requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:17 +0000 (12:07 -0700)]
staging: comedi: pcl818: remove function trace noise
These kernel messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:16 +0000 (12:07 -0700)]
staging: comedi: pcl818: remove unnecessary 'dev->irq' tests
These functions can only be called if the irq was sucessfully requested.
The dev->irq will always be valid.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:15 +0000 (12:07 -0700)]
staging: comedi: pcl818: remove 'irq_free' from private data
This member of the private data is not needed. We can check if
dev->irq is none zero instead. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:14 +0000 (12:07 -0700)]
staging: comedi: pcl816: use dev->read_subdev
Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:13 +0000 (12:07 -0700)]
staging: comedi: pcl816: remove 'sub_ai' from private data
This member of the private data is a duplicate of the comedi_device
'read_subdev' member. Remove the private data member and use the
comedi_device member instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:12 +0000 (12:07 -0700)]
staging: comedi: pcl816: only init command support if irq is available
The async command support requires an irq. Only initialize the subdevice
command support if the request_irq was successfull.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:11 +0000 (12:07 -0700)]
staging: comedi: pcl816: remove 'irq_free' from private data
This member of the private data is not needed. We can check if
dev->irq is none zero instead. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Dec 2013 19:07:10 +0000 (12:07 -0700)]
staging: comedi: s626: fix async command hookup
Only set the SDF_CMD_READ subdev_flag if the irq was sucessfully
requested.
Remove the unnecessary sanity check of dev->irq in s626_ai_cmd().
This callback is only hooked up if the irq is available.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZHAO Gang [Wed, 4 Dec 2013 07:24:13 +0000 (15:24 +0800)]
staging: et131x: delete unnecessary variable in function et131x_init
Variable u32 numrfd is not necessary in this function.
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / openwrt / staging / blogic.git / log