staging: ft1000: fix remaining checkpatch issues in ft1000_hw.c

The file ft1000_hw.c is still full of coding style problems that make it
challenging to read and understand. The lines inside the switch cases
in ft1000_proc_drvmsg() are indented too deeply, so remove one leading
tab. Join lines that are now able to fit in the 80 character limit.
This will take care of the "too many leading tabs" issue. Run
checkpatch.pl on the file, and correct all other issues it reports
(except lines with user visible strings over 80 chars).

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Waskiewicz Jr, Peter P <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: flatten nesting in dsp_broadcast_msg_id()

The function dsp_broadcast_msg_id() has four levels of nesting. Move the
handling for failed allocation for *dpram_blk from the else block at the
end to the block immediately following the test, reverse the sense of the
test, and exit with an error code if the allocation fails. This eliminates
descending into an if block if the allocation is successful. Move all
lines inside the removed block one tab to the left, and join lines
that will fall under the 80 char limit.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: fix checkpatch issues in ft1000_poll()

The function ft1000_poll(), in ft1000_hw.c, has many miscellaneous
coding style issues, such as improper indentation, C99 comments, use of
msleep(), and lines over 80 characters. Changes all spaces at the start
of lines to the proper number of tabs. Convert C99 comments to standard
/* */ style. Change calls to msleep(10) to usleep_range(9000, 11000).
Break lines over 80 characters, unless they are user visible strings.
Remove space before open paren in function calls. Fix any other issues
that checkpatch finds.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: flatten nesting in handle_misc_portid

The newly extracted function handle_misc_portid still has several
unnecessary levels of nesting, having inherited its logic from the
original extracted lines. Move handling for failed memory allocation
(of *pdpram_blk) to the top of the function, and return -1 from within
it. This eliminates the if statement around the body of the function.
Change two levels of nested if/else to an if/else-if/else. Create a
label, exit_failure, at the end of the function with the cleanup code,
and goto it at all points of failure. Also, goto it if the call to
ft1000_receive_cmd() fails, instead of descending into an if block if
it succeeds. Pull all lines from inside the former if blocks to the
left, and rejoin lines to take advantage of reclaimed horizontal space.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: extract helper handle_misc_portid()

The function ft1000_poll, in ft1000_hw.c, is complex, with deep levels
of nesting, unnecessary variables, and style issues. Extract the default
case of the switch statement to its own function, handle_misc_portid.
Make the variable struct dpram_blk *pdpram_blk local to the new function
and remove it from the old. The variable struct pseudo_hdr *ppseudo_hdr is
used only once, to access a member of another struct, so eliminate it
and access the member directly. Return -1 in all the places where the
code fails, and 0 on successful completion. Fix coding style errors.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: extract dsp_broadcast_msg_id()

The function ft1000_poll, in ft1000_hw.c, is overly complex, with at
least five levels of nesting. Extract the lines in switch case
DSPBCMSGID into their own function, called dsp_broadcast_msg_id(). Pass
one parameter, struct ft1000_usb *dev. Make a copy of struct dpram_blk
*pdpram_blk local to the new function, since it is initialized at the
top of each case in which it appears. Make unsigned long flags local to
the new function. Remove the assignment to struct pseudo_hdr
*ppseudo_hdr, which is otherwise unused in the switch case, and receives
the same assignment at the top of each case in which it appears. Return
an int, 0 for success and -1 for error. Correct style issues in the
extracted lines.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove unused variable nxtph

The function ft1000_poll, in ft1000_hw.c, is overly complex, with at
least five different levels of nesting. While preparing to extract one
of the cases to its own function, I discovered that the variable nxtph
is not used. It is declared and assigned a value in ft1000_poll(), then
passed by reference to the helper function ft1000_receive_command(),
which receives it as parameter. pnxtph does not appear in the body of
this function. Remove all occurrences of nxtph and pnxtph.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: STATUS defines completely removed

The ft1000 driver ignores the normal Linux error codes, using its
own macros, STATUS, STATUS_SUCCESS, and STATUS_FAILURE, instead.
Unsigned variables (u16 and u32) are sometimes used to hold them.
This patch converts all occurences of these macros to 0, 0 and -1,
respectively. It also changes the last remaining status variables
(mostly called status and ret) to ints, and removes the declarations
of the macros. This patch does not correct the whitespace issues
in the lines where the changes were made.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove formal function headers from ft1000_hw.c

The file ft1000_hw.c contains formal C99 style function headers that
waste space and convey little to no useful information. This patch
converts the headers to either one line standard /* */ style comments
or shorter standard style headers with parameter lists (if the parameter
list seemed helpful), or eliminates them entirely. Besides needing to be
made of its own accord, this change is in preparation to eliminate the
nonstandard STATUS_* #defines from the driver since they were cited in most
of the headers.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: STATUS_ defines removed from ft1000_download.c

Two files in the ft1000 usb driver ignore expected Linux error codes,
and instead use two STATUS_SUCCESS 0, and STATUS_FAILURE
0x1001. This patch removes all remaining occurrences of these from the
file ft1000_download.c. All occurrences of STATUS_SUCCESS have been
replaced by 0, and occurrences of STATUS_FAILURE have been replaced by
-1. One occurence of STATUS_FAILURE has been completely removed:
get_handshake collects either a local #define or 0 from its helper
function, check_usb_db, and immediately sets the collecting variable to
STATUS_FAILURE if the #define is returned. check_usb_db has been
modified to return -1 instead of the #define.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/imx: fix return value check in ipu_add_subdevice_pdata()

In case of error, the function platform_device_register_data() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: zram: Fix access of NULL pointer

This patch fixes the bug in reset_store caused by accessing NULL pointer.

The bdev gets its value from bdget_disk() which could fail when memory
pressure is severe and hence can return NULL because allocation of
inode in bdget could fail.

Hence, this patch introduces a check for bdev to prevent reference to a
NULL pointer in the later part of the code. It also removes unnecessary
check of bdev for fsync_bdev().

Cc: stable <stable@vger.kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: zram: Fix variable dereferenced before check

This patch fixes the following Smatch warning in zram_drv.c-
drivers/staging/zram/zram_drv.c:899
destroy_device() warn: variable dereferenced before check 'zram->disk' (see line 896)

Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: space prohibited before semicolon in r8185b_init.c

Fix checkpatch.pl issues with space prohibited
before semicolon in r8185b_init.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: fix space prohibited after that open parenthesis '(' in r8185b_init.c

Fix checkpatch.pl issues with space prohibited after that
open parenthesis '(' in r8185b_init.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: fix braces {} are not necessary for single statement blocks in r8185b_init.c

Fix checkpatch.pl issues with braces {} are not necessary
for single statement blocks in r8185b_init.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: fix trailing whitespace in r8185b_init.c

Fix checkpatch.pl issues with trailing whitespace
in r8185b_init.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: fix please, no space before tabs in r8185b_init.c

Fix checkpatch.pl issues with please, no space before
tabs in r8185b_init.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/nvec/Kconfig: remove trailing whitespace

This patch fixes checkpatch.pl error trailing whitespace.

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dwc2: Fix variable dereferenced before check

This patch fixes the following smatch warning in hcd_intr.c-
drivers/staging/dwc2/hcd_intr.c:1946 dwc2_hc_n_intr() warn: variable dereferenced before check 'chan' (see line 1936)

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: fix braces {} are not necessary for any arm of this statement

Fix checkpatch.pl issues with braces {} are not necessary
for any arm of this statement in vb_setmode.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: remove unneeded semicolons

This fixes coccinelle errors regarding unneeded
semicolons.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: use true and false for bool variables

This patch fixes coccinelle errors for bool variables
initialized with 1 or 0 instead of true and false.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: return values corrected in scram_start_dwnld

The ft1000 usb driver ignores expected Linux error codes, and uses two
values defined in ft1000_usb.h: STATUS_SUCCESS 0, and STATUS_FAILURE
0x1001; and sometimes -1. This patch changes the return values of the
function scram_start_dwnld to match the status of the handshake returned
by its helper functions, get_handshake and get_handshake_usb. If the
handshake fails, -ENETRESET is returned instead of the inappropriate
STATUS_FAILURE. Also, a new test has been added to differentiate failure
due to timeout from failure due to net reset (the default). -ETIMEDOUT
is returned in this case. Finally, 0 is returned on success instead of
STATUS_SUCCESS.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: change values of status return variable in write_dpram32_and_check

The ft1000 usb driver ignores expected Linux error codes, and uses two
values defined in ft1000_usb.h: STATUS_SUCCESS 0, and STATUS_FAILURE
0x1001; and sometimes -1. This patch changes the return value of the
function write_dpram_32_and check to 0 or -EREMOTEIO, respectively. The
relevant change was made in the helper function check_buffers (which is
only called from write_dpram32_and_check); it now returns 0 on success
and -EREMOTEIO on failure, and this is allowed to propagate through
write_dpram32_and_check. Assignments to the return variable status that
are no longer needed were removed as well. In one function up the call
chain, dsp_reload in ft1000_hw.c, the status variable was changed from
u16 to int to avoid collecting a signed value in an unsigned variable.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: Remove unnecessary pointer casting

Some void pointers can be assigned to other
pointer variables in functions without casting.

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipuv3-crtc: Invert IPU DI0 clock polarity

sig_cfg.clk_pol controls the 'di0_polarity_disp_clk' bit of register
IPUx_DI0_GENERAL through the following code in imx-drm/ipu-v3/ipu-di.c:

if (!sig->clk_pol)
di_gen |= DI_GEN_POLARITY_DISP_CLK;

With 'di0_polarity_disp_clk' bit set we do not have stable HDMI output on
mx6solo: contours of pictures look jittery and the white colour does not appear
really white.

Russell King initially reported this problem at:
http://www.spinics.net/lists/arm-kernel/msg279805.html

Inverting 'di0_polarity_disp_clk' leads to stable HDMI output image.

Tested on the following boards:
- mx6solowandboard (HDMI output)
- mx6qwandboard (HDMI output)
- mx6qsabrelite (LVDS)
- mx6qsabresd (HDMI output and LVDS)
- mx6dlsabresd (HDMI output)
- mx53qsb (parallel WVGA display)

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Fix sparse warnings in rtl_p2p.c

Sparse displays the following:

  CHECK   drivers/staging/rtl8188eu/core/rtw_p2p.c
drivers/staging/rtl8188eu/core/rtw_p2p.c:162:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_p2p.c:162:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_p2p.c:162:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_p2p.c:221:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_p2p.c:221:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_p2p.c:221:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_p2p.c:292:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_p2p.c:292:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_p2p.c:292:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_p2p.c:371:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_p2p.c:371:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_p2p.c:371:15:    got restricted __le16 *<noident>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Fix sparse warnings in rtw_mlme_ext.c

Sparse displays the following:

  CHECK   drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:1874:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:1874:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:1874:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2221:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2221:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2221:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2583:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2583:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2583:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2750:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2750:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:2750:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3002:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3002:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3002:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3197:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3197:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3197:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3311:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3311:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3311:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3563:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3563:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:3563:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4522:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4522:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4522:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4750:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4750:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4750:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4906:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4906:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:4906:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5040:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5040:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5040:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5184:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5184:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5184:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5322:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5322:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5322:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5654:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5654:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5654:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5769:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5769:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5769:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5894:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5894:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5894:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5996:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5996:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:5996:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:6066:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:6066:15:    expected unsigned short [usertype] *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:6066:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:6200:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:6200:15:    expected unsigned short *fctrl
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:6200:15:    got restricted __le16 *<noident>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Fix sparse warnings in rtl8188e.cmd.c

Sparse displays the following:

  CHECK   drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:285:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:285:15:    expected unsigned short [usertype] *fctrl
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:285:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:368:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:368:15:    expected unsigned short [usertype] *fctrl
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:368:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:403:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:403:15:    expected unsigned short [usertype] *fctrl
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:403:15:    got restricted __le16 *<noident>
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:465:15: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:465:15:    expected unsigned short [usertype] *fctrl
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c:465:15:    got restricted __le16 *<noident>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Fix sparse warnings in rtw_ieee80211.c

Sparse reports the following:

  CHECK   drivers/staging/rtl8188eu/core/rtw_ieee80211.c
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1593:14: warning: cast to restricted __le16

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: replace S626_MULT_X? values

Replace the use of the `S626_MULT_X1`, `S626_MULT_X2` and `S626_MULT_X4`
clock multiplier values with the equivalent `S626_CLKMULT_1X`,
`S626_CLKMULT_2X` and `S626_CLKMULT_4X` values to avoid duplication.
Replace the use of `S626_MULT_X0` with a new macro
`S626_CLKMULT_SPECIAL` (this is treated specially by the
'ClkMultA'/'ClkMultB' field of the 'CRA'/'CRB' register).  Remove the
now unused `S626_MULT_X?` macros.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove S626_BF_* macros

The `S626_BF_*` bitfield position macros are no longer used and are just
a subset of the corresponding `S626_STDBIT_*` bitfield position macros.
Remove them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: expand standardized IndxSrc values

The 'IndxSrc' value for the standardized encoder setup is currently 1
bit wide and takes one of the following values:

  S626_INDXSRC_HARD = 0 // index source from hardware encoder
  S626_INDXSRC_SOFT = 1 // index source software controlled by IndxPol

However the hardware 'IndxSrcA' and 'IndxSrcB' values for the 'A' and
'B' counters are 2 bits wide.  The above standardized values 0 and 1
correspond to the hardware values 0 and 2.

In order to simplify conversions between the standardized values and
hardware values, expand the range of standardized values to cover all
four possible values.  The new values are as follows:

  S626_INDXSRC_ENCODER = 0  // index source from hardware encoder
  S626_INDXSRC_DIGIN = 1    // index source from digital inputs
  S626_INDXSRC_SOFT = 2     // index source s/w controlled by IndxPol
  S626_INDXSRC_DISABLED = 2 // index source disabled

(Note the change in value for `S626_INDXSRC_SOFT` and the replacement of
`S626_INDXSRC_HARD` with `S626_INDXSRC_ENCODER` for consistency with the
`CntSrc` values.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: make CRA and CRB setup conversions more readable

Use the new macros defined in "s626.h" for constructing and decomposing
'CRA', 'CRB' and standardized encoder setup values to make the
conversions between standardized encoder setup values, and CRA/CRB
register values easier to follow.

There is some messing about with the 'IndxSrc' values which are 1-bit
wide in the standardized encoder setup, and 2-bit wide in the 'CRA' and
'CRB' register values.  This will be addressed by a later patch.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/imx: fix return value check in imx_drm_init()

In case of error, the function platform_device_register_simple() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: fix a misaligned comment

As pointed out by Hartley Sweeten, one of my recent patches resulted in
the start of a multi-line comment ending up misaligned.  Fix it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Set device type to wlan

The latest version of NetworkManager does not recognize the device as wireless
without this change.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> # [3.12+]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Remove OOM message after input_allocate_device

Emitting an OOM message isn't necessary after input_allocate_device
as there's a generic OOM and a dump_stack already done.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: drop redundant mac address check

Checking if MAC address is valid using is_valid_ether_addr() is already done in
of_get_mac_address().

Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix WARNING: space prohibited before semicolon.

This patch removes a space before semicolon as
specified by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: bcm: Removed a developer debug statement.

Removed a developer debug statement per the TODO list.  Additionally,
removed braces for the if-statement to match coding style.

Signed-off-by: Chuong Ngo <cngo.github@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Stging: bcm: Adapter.h : removed typedef from struct _U_IP_ADDRESS and changed it to lowercase

Running checkpatch.pl on the file drivers/staging/bcm/Adapter.h gave
an error as it is a mistake to use typedef for structures
according to CodeingStyle as it reduces readability. The typedef was
removed and all occurrences of the typedef union were replaced with
union u_ip_address as types are all lowercase.

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: Fix Sparse Warnings in reg.c

This patch fixes the Sparse Warnings "symbol was
not declared. Should it be static?" and "defined
but not used [-Wunused-variable]"
in reg.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: Fix Sparse Warnings in phy_calibration.c

This patch fixes Sparse Warnings "symbol was not
declared. Should it be static?" and "defined
but not used [-Wunused-function]" in
phy_calibration.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use memdup_user to simplify code

Use memdup_user rather than duplicating implementation. Fix following
coccinelle warnings:

drivers/staging/comedi/comedi_fops.c:1425:5-12: WARNING opportunity for memdup_user
drivers/staging/comedi/comedi_fops.c:1553:6-13: WARNING opportunity for memdup_user

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: status variables changed to int in ft1000_download.c

Linux uses a return type of int for status codes. The file
ft1000_download.c uses a mixture of u16 and u32. This patch changes all
variables called status or Status to ints, whether they are returned
from the function or not. It also changes the return type of all
functions returning one of the variables to correspond. Also, the
declaration of scram_dnldr has been changed in ft1000_usb.h.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: style issues fixed in write_blk

function write_blk, in ft1000_download.c, contains many coding style
issues. It has indentations of 3 spaces, long lines, C99 comments, and
extra whitespace. It also has a return type of u32, and changing the
returned variable in the function triggers a checkpatch leading spaces
warning. Indentation should be fixed throughout the file for
consistency.

This patch fixes those issues, in preparation for correcting the status
return type throughout the file. The variable Status has been changed
from u32 to int and renamed status.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: function write_dpram32_and_check extracted from write_blk

function write_blk is long and overly complex, consisting of a triply
nested loop. It also has improper indentation and line lengths
throughout, and has return type of u32 rather than int. Some of the
lines, when converted to proper indentation, create checkpatch warnings
for too many leading tabs.

This patch extracts the innermost loop into its own function,
write_dpram32_and_check. This removes several levels of indentation from
the extracted lines and makes the original function simpler. Two local
variables from the original function, u16 resultbuffer[] and a loop
counter, have been made local variables of the new function. Two calls
to msleep() have been replaced with usleep_range() as per Documentation/
timers/timers-howto.txt (which was referred to in a checkpatch warning).
Several other style issues in the extracted code have been corrected as
well.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: duplicate code replaced with call to request_code_segment

function scram_dnldr, in ft1000_download.c, is very long and consists
mainly of nested switch statements inside a while loop. Some code in one
of the inner switch cases was almost identical to the code in the
previously extracted function request_code_segment. The duplicated code
was replaced with a call to request_code_segment, and
request_code_segment was slightly modified to work in both cases.

A new parameter was added to request_code_segment, a bool to distinguish
which case it was replacing. The name of an existing parameter (now
called endpoint) was changed to reflect the fact that it will be passed
in from more than one place. Several lines from the case containing the
duplicated code were moved to request_code_segment, and a test was added
to determine if these lines or a line from the original function should
be run.

Finally, an unused variable (tempword) was removed from scram_dnldr.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: function request_code_segment extracted

function scram_dnldr in ft1000_download.c is very long and contains many
coding style errors and best practice violations. It consists of nested
switch statements inside a while loop. One of the inner switch cases has
been extracted as a helper function. Also, some style errors (such as
C99 comments) have been fixed, an assignment to an unread variable has
been removed, and break statements inside ifs have been converted to
returns.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: function scram_start_dwnld extracted from scram_dnldr in ft1000_download.c

function scram_dnldr is over 500 lines long, with deep indents that
trigger checkpatch warnings for too many tabs. It mainly consists of a
switch statement with long, complicated cases. The first case has been
extracted to form the helper function scram_start_dwnld. Some style
issues in the extracted lines have been corrected as well.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000: Fix assignment of bool to 0/1 in ft1000_dnld.c

This patch fixes the following warning in ft1000-pcmcia/ft1000_dnld.c-

drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c:307:6-18: WARNING: Assignment of bool to 0/1

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000: Fix comparsion of bool to 0/1 in ft1000_hw.c

This patch fixes the following coccinelle warning in ft1000-usb/ft1000_hw.c -

drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1924:9-25: WARNING: Comparison of bool to 0/1

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000: Fix assignment of bool to 0/1 in ft1000_hw.c

This patch fixes the following coccinelle warning in ft1000-usb/ft1000_hw.c-

drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1444:1-19: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1937:16-34: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1938:16-35: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1570:4-22: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1575:4-22: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:636:1-26: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:638:1-25: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:669:1-26: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:755:1-23: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:756:1-26: WARNING: Assignment of bool to 0/1

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000: Fix assignment of bool to non-0/1 constant in ft1000_download.c

This patch fixes the following coccinelle error in ft1000-usb/ft1000_download.c -

drivers/staging/ft1000/ft1000-usb/ft1000_download.c:615:1-16: ERROR: Assignment of bool to non-0/1 constant
drivers/staging/ft1000/ft1000-usb/ft1000_download.c:926:5-20: ERROR: Assignment of bool to non-0/1 constant
drivers/staging/ft1000/ft1000-usb/ft1000_download.c:943:7-22: ERROR: Assignment of bool to non-0/1 constant

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000: Fix assignment of bool to non-0/1 constant in ft1000_usb.c

This patch fixes the following coccinelle error in ft1000-usb/ft1000_usb.c-
drivers/staging/ft1000/ft1000-usb/ft1000_usb.c:50:4-18: ERROR: Assignment of bool to non-0/1 constant
drivers/staging/ft1000/ft1000-usb/ft1000_usb.c:174:1-15: ERROR: Assignment of bool to non-0/1 constant
drivers/staging/ft1000/ft1000-usb/ft1000_usb.c:39:12-26: ERROR: Assignment of bool to non-0/1 constant

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dwc2: Fix return error value in dwc2_driver_probe()

This patch fixes the following smatch warning in platform.c-
drivers/staging/dwc2/platform.c:109 dwc2_driver_probe() info: why not propagate 'irq' from platform_get_irq() instead of (-22)?

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dwc2: Fix conditional statement since urb->actual_length is never less than zero.

This patch fixes the following smatch warning in hcd.c:
drivers/staging/dwc2/hcd.c:787 dwc2_assign_and_init_hc() warn: unsigned 'urb->actual_length' is never less than zero.

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sbe-2t3e3: Fix smatch warning of function definition with external linkage

This patch fixes the following smatch warning in cpld.c-
drivers/staging/sbe-2t3e3/cpld.c:243:13: warning: function 'cpld_set_clock' with external linkage has definition

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: use memdup_user to simplify code

Use memdup_user rather than duplicating its implementation. This patch
fixes the following coccinelle warnings:

drivers/staging/rtl8192e/rtl8192e/rtl_core.c:2598:8-15: WARNING opportunity for memdup_user
drivers/staging/rtl8192e/rtllib_softmac.c:3594:9-16: WARNING opportunity for memdup_user

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: delete duplicated argument to |

This patch fixes the following coccinelle issue for a mask calculation:

drivers/staging/rtl8187se/r8180_core.c:2552:44-54: duplicated argument to & or |

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: fix code allignment

Fix confusingly indented code after if. This patch fixes the following
coccinelle issues:

drivers/staging/rtl8187se/r8180_wx.c:1148:2-11: code aligned with following code on line 1150
drivers/staging/rtl8187se/r8180_dm.c:668:1-84: code aligned with following code on line 674
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:623:2-38: code aligned with following code on line 625
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:148:1-85: code aligned with following code on line 149

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: bool tests don't need comparisons

This patch fixes the following coccinelle warning:

drivers/staging/rtl8187se/r8180_core.c:2217:5-40: WARNING: Comparison to bool

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: fix assignment of bool to 0/1

This patch fixes the following coccinelle warnings:

drivers/staging/rtl8187se/r8180_core.c:2433:1-20: WARNING: Assignment of bool to 0/1
drivers/staging/rtl8187se/r8180_core.c:2275:3-34: WARNING: Assignment  of bool to 0/1

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: use memdup_user to simplify code

This patch fixes the following coccinelle warning to use memdup_user
rather than duplicating its implementation:

drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:2947:9-16: WARNING opportunity for memdup_user

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sep: do not use comparisons on bool tests

This patch fixes coccinelle errors regarding comparisons
used in bool tests.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: do not use comparisons on bool tests

This patch fixes coccinelle errors regarding comparisons
used in bool tests.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: use memdup_user to simplify code

Use memdup_user rather than duplicating its implementation. Fix the
following coccinelle warnings:

drivers/staging/rtl8192u/r8192U_core.c:3792:7-14: WARNING opportunity for memdup_user
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:3153:9-16: WARNING opportunity for memdup_user

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: do not use comparisons on bool tests

This patch fixes coccinelle errors regarding comparisons
used in bool tests.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: use true and false for bool variables

This patch fixes coccinelle errors for bool variables
initialized with 1 or 0 instead of true and false.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: et131x: Fix Smatch Warning of Buffer Overflow

This patch fixes the following Sparse Warning in et131x.c-

drivers/staging/et131x/et131x.c:2957 nic_send_packet() error: buffer overflow 'frags' 17 <= 21
drivers/staging/et131x/et131x.c:2959 nic_send_packet() warn: buffer overflow 'frags' 17 <= 21
drivers/staging/et131x/et131x.c:2961 nic_send_packet() error: buffer overflow 'frags' 17 <= 21

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: fix line over 80 characters in r8185b_init.c

Fix checkpatch.pl issues with line over 80 characters
in r8185b_init.c, Italian to English translated added

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: use netdev_warn instead of printk

This patch fixes this type of checkpatch warnings:

WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then
pr_warn(...  to printk(KERN_WARNING ...

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: use netdev_info instead of printk

WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then
pr_info(...  to printk(KERN_INFO

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: prefer netdev_dbg to printk

This patch fixes the following checkpatch warning:

WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then
pr_debug(...  to printk(KERN_DEBUG ...

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: fix lines over 80 characters

This patch fixes lines that are well over 80 characters long and
silences the checkpatch warning.

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: fixup multi-line comment

This patch ensures that all multi-line comments are consistent with the Linux
kernel coding style for long (multi-line) comments.

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: remove an unnecessary line continuation

This patch fixed the following checkpatch warning:
WARNING: Avoid unnecessary line continuations

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: fix conditional statement indent

This patch fixes the following checkpatch warning:
WARNING: suspect code indent for conditional statements (24, 26)

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: else should follow close brace '}

This patch fixes the following checkpatch warning:
ERROR: else should follow close brace '}'

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: fix comments over 80 characters

This patch rearranges comments that are over 80 characters.

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: open brace following function declarations go on the next line

This patch fixes the following checkpatch error:

staging/rtl8187se/ieee80211/ieee80211_tx.c:232:
ERROR: open brace '{' following function declarations go on the next
line

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: fix checkpatch space and tab warnings

This patch fixes checkpatch issues regarding space and tab like:

WARNING: please, no spaces at the start of a line
ERROR: code indent should use tabs where possible
WARNING: suspect code indent for conditional statements (2, 4)
ERROR: space required before the open parenthesis '('
ERROR: space required after that ',' (ctx:VxO)

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: Replace FALSE with false

Replace user-defined type FALSE with C defined false keyword.

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: Replace BOOLEAN with bool

Remove user-defined BOOLEAN data type with C bool data
type.

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: use C89 comment style instead of C99-style

This patch fixes the comments in file ieee80211/ieee80211_tx.c from
driver rtl8187se, as reported by checkpatch. The C89 comments that
contain code
are deleted.

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: (foo*) should be (foo *)

Fix checkpatch error:

ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sb105x: Remove unneeded semicolon in sb_pci_mp.c

Remove unneeded semicolon in sb_pci_mp.c to meet kernel
coding style.

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:line6: fix line over 80 characters

Fix checkpatch.pl issues with line over 80 characters
in playback.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: Replaced min() with min_t() in

This patch replaces min() with min_t() in rts51x_scsi.c

Signed-off-by: Archana kumari <archanakumari959@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: line6: Fix Sparse Warning of incorrect type

This patch fixes the following sparse warnings in toneport.c-

drivers/staging/line6/toneport.c:329:48: warning: incorrect type in argument 1 (different base types)
drivers/staging/line6/toneport.c:329:48:    expected short [signed] product
drivers/staging/line6/toneport.c:329:48:    got restricted __le16 [usertype] idProduct
drivers/staging/line6/toneport.c:385:48: warning: incorrect type in argument 1 (different base types)
drivers/staging/line6/toneport.c:385:48:    expected short [signed] product
drivers/staging/line6/toneport.c:385:48:    got restricted __le16 [usertype] idProduct
drivers/staging/line6/toneport.c:438:64: warning: incorrect type in argument 1 (different base types)
drivers/staging/line6/toneport.c:438:64:    expected short [signed] product
drivers/staging/line6/toneport.c:438:64:    got restricted __le16 [usertype] idProduct

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: line6: Fix Sparse Warning of restricted __le16 degrades to integer

This patch fixes the following sparse warning in toneport.c-
warning: restricted __le16 degrades to integer

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: line6: Fix Sparse warning of restricted __le16 degrades to integer

This patch fixes the following sparse warning in driver.c-
warning: restricted __le16 degrades to integer

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: removed space after '*' in pointer declaration

space after '*' in pointer declaration is not preferred in linux
and results in checkpatch error. Hence removed the spaces present
after the '*' in pointer declarations to fix the checkpatch errors

Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: fix code indenting error in power.c

This patch fixes a code indentation error found by checkpatch.pl
where a line was indented with spaces instead of tabs

Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: Fix Sparse Warning: cast from restricted gfp_t in hostap.c

This patch fixes the following type of sparse warnings:

drivers/staging/vt6656/hostap.c:688:42: warning: cast from restricted gfp_t
drivers/staging/vt6656/hostap.c:688:42: warning: incorrect type in argument 2 (different base types)
drivers/staging/vt6656/hostap.c:688:42: expected restricted gfp_t [usertype] flags
drivers/staging/vt6656/hostap.c:688:42: got int [signed] <noident>

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: Rewrite return statement in socklnd.c

Rewrite the return statement in socklnd.c to eliminate the
use of a ternary operator. This will prevent the checkpatch.pl
script from generating a warning saying to remove () from
this particular return statement.

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: kzalloc should be used instead of kmalloc/memset

This patch fixes the following coccinelle warnings in driver gdm724x:

drivers/staging/gdm724x/gdm_usb.c:127:9-16: WARNING: kzalloc should be used for t_sdu, instead of kmalloc/memset
drivers/staging/gdm724x/gdm_usb.c:91:5-12: WARNING: kzalloc should be used for t, instead of kmalloc/memset

Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/imx: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO

This patch fixes coccinelle error regarding usage of IS_ERR and
PTR_ERR instead of PTR_ERR_OR_ZERO.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>