v2raya: Update to 2.2.5

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 381d1af34796bbc2254581360243e56ea3766e19)

banip: update 0.9.4-2

* fix a long standing problem in the logfile-parser with dropbear and compressed IPv6 addresses

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 7b06b1d312ed3a43d2d030b55b6932a55365b5bd)

banip: release 0.9.4-1

* add support for destination port & protocol limitations for external feeds (see readme for details),
  useful for lan-forward ad- or DoH-blocking, e.g. only tcp ports 80 and 443
* add turris sentinel blocklist feed
* update readme

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 730ad59cb960bd10c1a3a7597cafaabf080dcf7a)

rclone: add fuse3-utils as dependency

rclone has switched to use fuse3 since v1.62.0.

Reported-by: qiuzi <gxfclql@gmail.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit df9d076d600a3d02da198af4a625980ed0633d2a)

yq: Update to 4.42.1

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit fa54dbc72a8aa25830b1c2e341876182ea19b455)

v2fly-geodata: Update to latest version

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 120fc57d553ef76ce144fccec1426b7ce1bc4c73)

cloudflared: Update to 2024.2.1

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 18aef55126916334e35fe24d3a9268fac6cb9e76)

btop: Update to 1.3.2

Synced LDFLAGS from upstream Makefile.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 187b52c95afc826213ba3e204e43ed009d8e8908)

v2raya: Update to 2.2.4.7

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 870d09c5dd577a05cd850228b4a2e4aaa3f4362c)

yq: Update to 4.41.1

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 69d963df9e7fc580d7efa11ccaf372b2b2dc8986)

yq: Update to 4.40.7

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit aec476691327417dd1b5576fad1600ae53b03697)

cloudflared: Update to 2024.2.0

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 87bd747652ad03a07ea550db79797563e132da00)

v2ray-geodata: Update to latest version

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 21a8b968d16cb1655eb8bed516a334be198a0c7c)

rtl-sdr: update to v2.0.1

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
(cherry picked from commit c623291b383495a71dcddbbb866d5aa6c9ccb1a4)
Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>

rtl_433: update to 23.11

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
(cherry picked from commit 0bb9240f6be9b695d1eebf9f0d96092957efe85c)
Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>

travelmate: update 2.1.2-5

* final vpn tweaks

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit bec5f35dea7ac5b4b4b7d75a931be470a19d4f22)

adblock: update 4.1.5-9

* minimal fix with reporting interface 'any'

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 0af6e8d15898f62c0c5080877af4fd8557bb4731)

ragel: new package to build vectorscan

This is a new package for ragel which is a dependency for another
new package vectorscan

Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit fa76c4df5c857ee564bf2f2eaeedfea5b497b1e7)

snort3: build against gperftools-runtime

Should provide increases in snort3 performance thanks to thread-
caching malloc provided by gperftools.  Avg CPU usage is down.
Another user reported higher throughput achieved with snort3
compiled with this on samba transfers on system with CPU-limited
snort3 performance.[1]

1. https://forum.openwrt.org/t/some-help-with-a-makefile-gperftools/165656/22

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit 4295bd7f45943b92e6e12ba91aac5f701b2da5a3)

snort3: update to 3.1.81.0

Changelog: https://github.com/snort3/snort3/releases/tag/3.1.81.0

   ,,_     -*> Snort++ <*-
  o"  )~   Version 3.1.81.0
   ''''    By Martin Roesch & The Snort Team
           http://snort.org/contact#team
           Copyright (C) 2014-2024 Cisco and/or its affiliates. All rights reserved.
           Copyright (C) 1998-2013 Sourcefire, Inc., et al.
           Using DAQ version 3.0.14
           Using LuaJIT version 2.1.0-beta3
           Using OpenSSL 3.0.13 30 Jan 2024
           Using libpcap version 1.10.4 (with TPACKET_V3)
           Using PCRE version 8.45 2021-06-15
           Using ZLIB version 1.3.1
           Using Hyperscan version 5.4.2 2024-02-16
           Using LZMA version 5.4.6

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit a7b5bfbfb75c07f05072e52224d3259648165916)

gperftools: add new package

Thread-caching malloc provided by this package improves snort3
performance.  I have been running with this for over seven months
without issues.  Avg CPU usage is down.  Another user reported
higher throughput achieved with snort3 compiled with this on
samba transfers on system with CPU-limited snort performance.[1]

1. https://forum.openwrt.org/t/some-help-with-a-makefile-gperftools/165656/22

Build system: x86/64
Build-tested: x86/64
Run-tested: x86/64

Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit c1b4e80825d6855d66899dc32490b0ce9537aff5)

hyperscan: new package for speeding up regex ops

Hyperscan is a high performance regular expression matching
library from Intel that runs on x86 platforms and offers
support for Perl Compatible Regular Expressions (PCRE) syntax,
simultaneous matching of groups of regular expressions, and
streaming operations.

This has utility in speeding up snort3.

Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit 1db5c5461778223c661ae9206f3c5d6929081b84)

dockerd: Update to 25.0.3

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>

docker: Update to 25.0.3

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>

containerd: Update to 1.7.13

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>

runc: Update to 1.1.12

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>

tailscale: Update to 1.58.2

https://github.com/tailscale/tailscale/releases/tag/v1.58.2

Signed-off-by: Zephyr Lykos <git@mochaa.ws>
(cherry picked from commit a37a6e17035f67c8f6c3e4325d0bae116e0fcf2a)

tailscale: Update to 1.58.0

https://github.com/tailscale/tailscale/releases/tag/v1.58.0

Signed-off-by: Zephyr Lykos <git@mochaa.ws>
(cherry picked from commit 0b0a13ed3338e7111f28c14c296a00a4f6b9123c)

travelmate: update 2.1.2-4

* more re-connections tweaks
* made travelmate generated emails responsive

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit bd8829b341b8e86147280ba5aa2c4523f3adc2af)

Merge pull request #23485 from mhei/23.05-php8-update-to-8.2.16

[23.05] php8: update to 8.2.16

travelmate: update 2.1.2-3

* various vpn optimizations
* remove obsololete trm_maxscan option
* small fixes for net status and captive portal handling
* add an additional login variant to the h-hotels login script
* fix the wifibahn login script work again with wifionice hotspots again
* update readme

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 6e4ea63b7e701298807babecfc8d319327d6a4ad)

git: update to 2.43.2

- Refresh a patch

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
(cherry picked from commit f9e16375f6ab491be91b506e6c9a7828ee9f7adf)

git: update to 2.43.0

- Refresh patches

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
(cherry picked from commit 158b76119385cc5d4bacdde9b903da8cabd44706)

lighttpd: update to lighttpd 1.4.74 release hash

Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
(cherry picked from commit 4d8bb07b734391d11318cb319548a17273820685)

ovn: bump to 22.03.5

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 4d1c7a144ab06dfdad6b11a90a364e7f88a976c3)

openvswitch: bump to 2.17.9

Refresh and backport patches so that

 - ./python path in the source code takes precedence over the same dir in hostpkg
 - OVN LTS version 22.03.5 which depends on Open vSwitch 3.0 can compile
   with Open vSwitch 2.17

Fixes: https://github.com/openwrt/packages/issues/22744
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 7ccbb9a66cfadba035e2ad95a7931877e5faf504)

squid: fix configure options

- Remove non-existing 'dlmalloc' option
- Use 'with-cap' instead of 'with-libcap'
- Use 'with-xml2' instead of 'with-libxml2'
- Patch configure.ac to properly handle 'with-nettle'

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
(cherry picked from commit f58be51721fb0e2c5aa0747bce36a19deb7392dd)

unbound: update to latest upstream release version 1.19.1

Maintainer: @EricLuehrsen
Fixes: CVE-2023-50387, CVE-2023-50868
Release notes: https://nlnetlabs.nl/news/2024/Feb/13/unbound-1.19.1-released/
Run tested: BPi-R3, mediatek/filogic, OpenWrt 23.05.2 with updated packages from snapshot
Signed-off-by: S. Brusch <ne20002@gmx.ch>
(cherry picked from commit 35ba14e50c6c90b3cc32538573d02a3b4f5b9184)

libuv: fix CVE-2024-24806

Update to 1.48.0
CVE-2024-24806 : Improper Domain Lookup that potentially leads to SSRF attacks

Vulnerabilities fixed
* CVE-2024-24806 / GHSA-f74f-cvh7-c6q6 0f2d7e7, 3530bcc and e0327e1
Notable Changes
* linux: disable io_uring on ppc64 and ppc64le #4285
* linux: disable io_uring on hppa below kernel 6.1.51 #4224
* win/spawn: optionally run executable paths with no file extension #4292 (We recommend that most users consider setting this by default)
Important Bugs Fixed
* unix,win: fix busy loop with zero timeout timers #4250, #4304.

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 02a982bc10e8278905d0b76ac073b82192576433)

haproxy: update to v2.8.6

- Update haproxy PKG_VERSION and PKG_HASH
- See changes: http://git.haproxy.org/?p=haproxy-2.8.git;a=shortlog

Signed-off-by: Christian Lachner <gladiac@gmail.com>

ocserv: updated config

Signed-off-by: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>

ocserv: use better separator for sed

This prevents clashes with network addresses that
contain '/'.

Resolves: #18589

Signed-off-by: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>

openconnect: make host dependency more resilient

Retry when resolveip fails as it seems to be causing issues
on startup depending on various unpredictable parameters.

Resolves: #23185

Signed-off-by: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>

openconnect: update to 9.12

Remove upstream backport and fix libxml 1.12 compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

openconnect: add support for option --pfs

Add support for the OpenConnect option `--pfs`.
Designed to require perfect forward secrecy.

Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>

php8: update to 8.2.16

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

lxc: update to 5.0.3

Bump to latest upstream release.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit 1b5ee689f3f8fa68580206274b5b67c06db3ec91)

zabbix: update to version 6.4.7

Switch to current stable version 6.4.7.
See release notes:
https://www.zabbix.com/rn/rn6.4.7

So that the new version builds cleanly. The 'libevent2-pthreads' must be
added as dependency.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 4f9ced5cf9d411dc54a815beb365b539c561bbfb)

yt-dlp: bump to version 2023.12.30

Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
(cherry picked from commit 5d3424f992b09602f2abd4e71cb163a3af8f3e7c)

yt-dlp: bump to version 2023.11.16

Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
(cherry picked from commit 707e87884d67650c26fda2c30c790d5832e319d7)

yt-dlp: add missing dependencies

Added missing python3-{logging,uuid} dependencies.

Signed-off-by: Rani Hod <rani.hod@gmail.com>
(cherry picked from commit 40a680ffd7d155798123a9eadcc3411f7a201259)

node: February 14 2024 Security Releases

Update to v18.19.1
This is a security release.

Notable changes
* CVE-2024-21892 - Code injection and privilege escalation through Linux capabilities- (High)
* CVE-2024-22019 - http: Reading unprocessed HTTP request with unbounded chunk extension allows DoS attacks- (High)
* CVE-2023-46809 - Node.js is vulnerable to the Marvin Attack (timing variant of the Bleichenbacher attack against PKCS#1 v1.5 padding) - (Medium)
* CVE-2024-22025 - Denial of Service by resource exhaustion in fetch() brotli decoding - (Medium)
* undici version 5.28.3
* npm version 10.2.4

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

Merge pull request #23407 from stangri/openwrt-23.05-adblock-fast

[23.05] adblock-fast: add force_dns_interface setting

bind: bump to 9.18.24

Fixes CVEs:

- CVE-2023-50387: Validating DNS messages containing a lot of DNSSEC signatures
  could cause excessive CPU load, leading to a denial-of-service condition.
- CVE-2023-50868: Preparing an NSEC3 closest encloser proof could cause
  excessive CPU load, leading to a denial-of-service condition.
- CVE-2023-4408: Parsing DNS messages with many different names could cause
  excessive CPU load.
- CVE-2023-5517: Specific queries could cause named to crash with an assertion
  failure when nxdomain-redirect was enabled.
- CVE-2023-5679: A bad interaction between DNS64 and serve-stale could cause
  named to crash with an assertion failure, when both of these features were
  enabled.

Signed-off-by: Noah Meyerhans <frodo@morgul.net>
(cherry picked from commit d277e41e78972130f75dc816ebcbd7931f582519)

bind: bump to 9.18.19

Fixes CVEs:

CVE-2023-3341 - Previously, sending a specially crafted message over the
control channel could cause the packet-parsing code to run out of available
stack memory, causing named to terminate unexpectedly.

CVE-2023-4236 - A flaw in the networking code handling DNS-over-TLS queries
could cause named to terminate unexpectedly due to an assertion failure under
significant DNS-over-TLS query load.

Signed-off-by: Noah Meyerhans <frodo@morgul.net>
(cherry picked from commit 835b1051511b592d69bc0b8a7d5d993337f890da)

bind: update to version 9.18.18

Release notes:
https://downloads.isc.org/isc/bind9/9.18.18/doc/arm/html/notes.html#notes-for-bind-9-18-18
https://downloads.isc.org/isc/bind9/9.18.17/doc/arm/html/notes.html#notes-for-bind-9-18-17

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 6a8d3565f0a99fe22cac6db9a8bbf553b7dff5a5)

bind: bump to 9.18.16

Fixes CVEs:

- CVE-2023-2828: The overmem cleaning process has been improved, to
  prevent the cache from significantly exceeding the configured
  max-cache-size limit.
- CVE-2023-2911: A query that prioritizes stale data over lookup
  triggers a fetch to refresh the stale data in cache. If the fetch is
  aborted for exceeding the recursion quota, it was possible for named
  to enter an infinite callback loop and crash due to stack overflow.

The complete list of changes is available in the upstream release
notes at
https://ftp.isc.org/isc/bind9/cur/9.18/doc/arm/html/notes.html#notes-for-bind-9-18-16

Signed-off-by: Noah Meyerhans <frodo@morgul.net>
(cherry picked from commit 9ac79ad46966908d2ceb64c0e0d8a0bff435767a)

pdns-recursor: update to 4.8.6 (fixes CVE-2023-50387, CVE-2023-50868)

Signed-off-by: Peter van Dijk <peter.van.dijk@powerdns.com>

Merge pull request #23415 from systemcrash/p910nd_picks

P910nd v23.05 picks

squid: update to 6.7

- Switch URL to HTTPS
- Remove default/obsolete configure options
- Fix and refresh the patch

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
(cherry picked from commit 4007a08529a86b600b4ce6476cf6367de577a645)

p910nd: bump release

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 9dad4285d3c2de30cf27baa2b299246bda514577)

p910nd: hotplug shellcheck fixes

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 58e7bfc41f02118e5d8b6f5b08a021d9bc351e00)

p910nd: init: check device (/dev/usb/lpX) existence

this prevents the daemon exiting when a configured device
is not plugged in.

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit dabeaa76439260a6a41942365b2526c69dc728aa)

p910nd: init: partial fix for openwrt/packages#10496

Harmless to carry this fix until procd.sh adds the param

This parameter will mean umdns advertises not just "OpenWrt" but a more
appropriate string:

"Apple LaserWriter Pro 630"

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit ac501c908d1a6a607f89373d4667a6949b88ca55)

p910nd: hotplug+init: include extra ieee1284 properties

Apple and macOS GUI co-opts the mDNS note= param as "Location"

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 4591a79fa29f5c46b7061860ac1f51adc848697f)

p910nd: hotplug: minor bug fixes

Commit driver_home defaults before continuing

Fix missing path for serial number acquisition

Store current device if no previously configured device had one.
Also set CHAR_DEV so the printer can get its driver sent on first run.

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 5bc581e6986c84e81d4827b244bbf0deacad6e00)

p910nd: hotplug: small refactor

replace -a with &&

shorten uci commands via variables

add optional ieee1284_id parameters

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 6e886cd4340470a21d6f8cc7928d18d4a48214df)

p910nd: init: add txtvers=1 to mDNS properties

The spec https://developer.apple.com/bonjour/printing-specification/bonjourprinting-1.2.1.pdf
notes:

... if the meaning of any of the TXT record keys is changed, the txtvers value
will be incremented. The current value of this key is “1”, and if this key does not exist in
the TXT record, the default value of “1” is assumed. The txtvers SHOULD be the first
key/value pair in the TXT record.

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 069cc8dc810f10e04abc239727b582e34053d6f1)

p910nd: init: line-break and conditionalize mDNS properties

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit ffa1bbbe7844aca3ae465cc7f1ba018cc4590579)

p910nd: init: only run mDNS changes if mdns is set to on

i.e. don't do the extra work unless mdns setting is enabled

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit b8890c69e40dbd72f35e4ea9fc78aa13a425fd46)

p910nd: init script

Don't run procd with a name of p9100d or p9101d etc.
Use the original binary name: p910nd.

This way, all supplied parameters should be visible via e.g.:

ps
xargs -0 < /proc/{procid}/cmdline

Revise all p910nd strings to the variable DAEMON_NAME or CONFIG where
appropriate.

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 34a35c93cedb259ab67d826d05c700a0457ab136)

p910nd: hotplug script

Signed-off-by: Paul Donald <newtwen@gmail.com>
(cherry picked from commit 825b22a4db952c891b07341e0176bc6d64f2d72a)

adblock-fast: add force_dns_interface setting

* allow users to specify list of interfaces/networks to force the
  DNS Hijacking on

Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit eafdd63d675a84c3a80a86f7af8c1fd4fb823caa)

stlink: add packages

stlink is an open source toolset to program and debug STM32 devices
and boards manufactured by STMicroelectronics.

Resulting binary packages:
 * stlink - library and shared chip info data
 * st-info - a programmer and chip information tool
 * st-flash - a flash manipulation tool
 * st-trace - a logging tool to record information on execution
 * st-util - a GDB server

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit e609f6acdf3e4619d691d5325efb9cc8a9a1b9fa)

crowdsec: new upstream release version 1.6.0

Update crowdsec to latest upstream release version 1.6.0

Signed-off-by: S. Brusch <ne20002@gmx.ch>
Maintainer: Kerma Gérald <gandalf@gk2.net>
Package tested: not able to test run due to limited space (package is big)

Description: update to latest version of upstream
(cherry picked from commit c08dac5ec52441d1aefc0bf8ef251fb1fae5ff8e)

openssh: fix build failure on powerpc_8548
https://github.com/openssh/openssh-portable/commit/1036d77b34a5fa15e56f516b81b9928006848cbd

Signed-off-by: Sibren Vasse <github@sibrenvasse.nl>
(cherry picked from commit a79c49578ca136556bd10d8990aa52ef4eb0664b)

openssh: bump to 9.6p1

Release notes: https://www.openssh.com/txt/release-9.6

Signed-off-by: Rucke Teg <rucketeg@protonmail.com>
(cherry picked from commit e8dfc6abbee88f35887c66ec785b081252d6d07d)

tailscale: create combined tailscale/tailscaled

Modify Makefile to combine tailscale and tailscaled according to
Tailscale documentatio (https://tailscale.com/kb/1207/small-tailscale)

This resulted for x86_64 in an exec of 31MB + the symlink. Before it
was 29MB (tailscaled) and 10MB (tailscale).

Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
(cherry picked from commit 7bef195bbabcec88a2b9055846880fd93c2a8a7a)

knot: update to version 3.3.4

Signed-off-by: Jan Hák <jan.hak@nic.cz>
(cherry picked from commit 66c1065b453b46a709f5143459d8a4cee777f9a0)

knot: update to version 3.3.3

Signed-off-by: Jan Hák <jan.hak@nic.cz>
(cherry picked from commit a693dd5821b11c442bff817cbc4a8193d0367839)

dawn: Add PKG_BUILD_FLAGS:=no-lto because lto causes strange SegFaults

Signed-off-by: Carsten Schuette <schuettecarsten@googlemail.com>
(cherry picked from commit d9acb54dc49b63ea3b473d72543c76c02e93eb2d)

dawn: Update to 2023-05-14

Signed-off-by: Carsten Schuette <schuettecarsten@googlemail.com>
(cherry picked from commit 6c5c99d206e62b44de1bbe60b66deba459396508)

snowflake: update to 2.8.1

Changelog:
https://gitlab.torproject.org/tpo/anti-censorship/pluggable-transports/snowflake/-/blob/v2.8.1/ChangeLog

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 4173327904acc61a0c2597dd881bc1fa51ad8894)

mosquitto: reenable options wrongly turned off

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 69dc285ac9259241b65cc7d0c690236dbeaf743e)

python-ble2mqtt: update to 0.2.2

b3b0cc8 version 0.2.2
85515cd roidmi: initial support for NEX2 Pro
62addc2 isort imports
8695649 README: update other govee to govee_ht
33f6ade ruuvitag: remove device class for counter
2099607 Rename key govee->govee_ht
12acacd codestyle updates
dbba43d ruuvitag: drop redundant import
84878e0 base: add and use HumidityTemperatureSensor
e9f0046 xiaomi_lywsd03_atc: make send_custom a class variable
2f4809a base: use lowercase for instance variable
5b1af17 govee: add manufacturer
7891691 ruuvitag: add manufacturer
cfd799b ruuvitag: remove inheritance from SubscribeAndSetDataMixin
7be28a1 codestyle updates
bffcf5e Add Govee H5074 temperature/humidity sensor support (#77)

Signed-off-by: Quintin Hill <stuff@quintin.me.uk>
(cherry picked from commit 268ed6d3476f3f3170d71f7ceb91b8c6f2611ea2)

python-dbus-fast: upgrade to 2.21.1

fix: avoid expensive runtime inspection of known callables (https://github.com/Bluetooth-Devices/dbus-fast/pull/277)
Signed-off-by: Quintin Hill <stuff@quintin.me.uk>
(cherry picked from commit 8db974d8ebcc19882dd5af6d00248ee820bb5483)

nextdns: Update to version 1.42.0

Signed-off-by: Olivier Poitrey <rs@nextdns.io>

Openvpn: add missing script-security

Maintainer:  @neheb

Compile tested: armv7, cortexA15, OpenWRT 23.05
Run tested: Linksys EA8500

Compile tested: armv8, cortexA53, OpenWRT main
Run tested: Dynalink DL-WRX36

Description:
Script-security is always 2 and cannot be changed from the openvpn config file due to a missing rule in openvpn.init.

This is discussed in issue #23014

This patch adds the missing rule in openvpn.init to parse script-security from the openvpn config file.

Signed-off-by: Erik Conijn <egc112@msn.com>
(cherry picked from commit 7b40d179bcd04a1f3b5b794fd952ef431c833cad)

cloudflared: refine config.yml

The config.yml is an example of a tunnel local configuration.
But the cloudlfared treat it as a real config and fails to start.
So to avoid problems let's comment all the statements.

The `url: http://localhost:8000` is not a valid config option.

Additionally add a smale of configuring ingres rules.

The cloudflared.config has missing option token.

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
(cherry picked from commit b3580a76d8a4bc0bfa075ba3da945bfe92526871)

dnsproxy: Update to 0.64.1

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit f6714eb01e60d56113b67831bfcd9fc83ea07ef7)

inih: Update to r58

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 2c6453adb68a63aaa7a79d079038b08c288a0da6)

rclone: Update to 1.65.2

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 4437234dc43095212299417ee25aa43266374f50)

cloudflared: Update to 2024.1.5

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 17dfbd861360cae1a787c4618a0fe859d10e92da)

dos2unix: Update to 7.5.2

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 38fc2d2e9f7dfa8ea50ddb89fd9ea76d0609d439)

Merge pull request #23253 from stangri/openwrt-23.05-curl

[23.05] curl: update to 8.6.0

Merge remote-tracking branch 'yggdrasil-openwrt/yggdrasil-for-23.05' into openwrt-23.05

[23.05] yggdrasil: overhaul package with netifd support

Compile tested: none, see below
Run tested: all package compiling and qa testing done in snapshots
Description: we must backport v0.5 into 23.05 because the breaking protocol situation with v.0.4. the counterpart package, luci-proto-yggdrasil is already in 23.05 feeds.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

curl: update to 8.6.0

* https://curl.se/changes.html#8_6_0

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
(cherry picked from commit 0f2c98d53f1aec96c21a707fc0e1a01b5a53a840)

Merge pull request #23227 from stangri/openwrt-23.05-nebula

[23.05] nebula: update to 1.8.2-2

nebula: update to 1.8.2-2

The following fixes have been applied to Makefile:
* fix the nebula license type
* add PKG_CPE_ID
* remove unneeded call to Build/Compile
* add leading spaces to descriptions
* add Package/nebula/conffiles definition
* remove unneeded /lib/upgrade/keep.d files
* no longer install actual license file
* add the README file

Kudos to @BKPepe and @1715173329 for feedback which lead to these fixes

Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit ae22bea8ddda7dd4409ea436e34c39073c954d8d)

Merge pull request #23201 from mhei/23.05-php8-update-to-8.2.15

[23.05] php8: update to 8.2.15