drm/i915: Separate out reset flags from the reset counter

In preparation for introducing a per-engine reset, we can first separate
the mixing of the reset state from the global reset counter.

The loss of atomicity in updating the reset state poses a small problem
for handling the waiters. For requests, this is solved by advancing the
seqno so that a waiter waking up after the reset knows the request is
complete. For pending flips, we still rely on the increment of the
global reset epoch (as well as the reset-in-progress flag) to signify
when the hardware was reset.

The advantage, now that we do not inspect the reset state during reset
itself i.e. we no longer emit requests during reset, is that we can use
the atomic updates of the state flags to ensure that only one reset
worker is active.

v2: Mika spotted that I transformed the i915_gem_wait_for_error() wakeup
into a waiter wakeup.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-6-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-7-chris@chris-wilson.co.uk

drm/i915: Simplify ELSP queue request tracking

Emulate HW to track and manage ELSP queue. A set of SW ports are defined
and requests are assigned to these ports before submitting them to HW. This
helps in cleaning up incomplete requests during reset recovery easier
especially after engine reset by decoupling elsp queue management. This
will become more clear in the next patch.

In the engine reset case we want to resume where we left-off after skipping
the incomplete batch which requires checking the elsp queue, removing
element and fixing elsp_submitted counts in some cases. Instead of directly
manipulating the elsp queue from reset path we can examine these ports, fix
up ringbuffer pointers using the incomplete request and restart submissions
again after reset.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-3-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-6-chris@chris-wilson.co.uk

drm/i915: Reorder submitting the requests to ELSP

Just rearrange the code to reduce churn in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-5-chris@chris-wilson.co.uk

drm/i915: Compute the ELSP register location once

Similar to the issue with reading from the context status buffer,
see commit 26720ab97fea ("drm/i915: Move CSB MMIO reads out of the
execlists lock"), we frequently write to the ELSP register (4 writes per
interrupt) and know we hold the required spinlock and forcewake throughout.
We can further reduce the cost of writing these registers beyond the
I915_WRITE_FW() by precomputing the address of the ELSP register. We also
note that the subsequent read serves no purpose here, and are happy to
see it go.

v2: Address I915_WRITE mistakes in changelog

   text    data     bss     dec     hex filename
1259784    4581     576 1264941  134d2d drivers/gpu/drm/i915/i915.ko
1259720    4581     576 1264877  134ced drivers/gpu/drm/i915/i915.ko

Saves 64 bytes of address recomputation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-4-chris@chris-wilson.co.uk

drm/i915: Record the position of the workarounds in the tail of the request

Rather than blindly assuming we need to advance the tail for
resubmitting the request via the ELSP, record the position.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-3-chris@chris-wilson.co.uk

drm/i915: Only queue requests during execlists submission

Leave the more complicated request dequeueing to the tasklet and instead
just kick start the tasklet if we detect we are adding the first
request.

v2: Play around with list operators until we agree upon something

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-2-chris@chris-wilson.co.uk

drm/i915: Add a sw fence for collecting up dma fences

This is really a core kernel struct in disguise until we can finally
place it in kernel/. There is an immediate need for a fence collection
mechanism that is more flexible than fence-array, in particular being
able to easily drive request submission via events (and not just
interrupt driven). The same mechanism would be useful for handling
nonblocking and asynchronous atomic modesets, parallel execution and
more, but for the time being just create a local sw fence for execbuf.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-1-chris@chris-wilson.co.uk

drm/i915: Move HAS_GUC definition to platform definition

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platform
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Make HWS_NEEDS_PHYSICAL the exception

Make the .hws_needs_physical the exception by switching the flag
on earlier platforms since they are fewer to support. Remove the flag on
later GPUs hardware since they all use GTT hws by default.

Switch the logic as well in the driver to reflect this change

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_GMCH_DISPLAY definition to platform

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_L3_DPF definition to platform definition

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_LOGICAL_RING_CONTEXTS definition to platform

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_HW_CONTEXTS definition to platform

Moving all GPU features to the platform definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN2_FEATURES for device info

Introducing a GEN2_FEATURES macro to simplify the struct definitions by
platforms given that most of the features are common. Inspired by the
GEN7_FEATURES macro done by Ben W. and others.

Use it for 830, 845g, i85x, i865g.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN3_FEATURES for device info

Introducing a GEN3_FEATURES macro to simplify the struct definitions by
platforms given that most of the features are common. Inspired by the
GEN7_FEATURES macro done by Ben W. and others.

Use it for i915g, i915gm, i945g, i945gm, g33 and pnv.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN4_FEATURES for device info

Introducing a GEN4_FEATURES macro to simplify the struct
definitions by platforms given that most of the features are common.
Inspired by the GEN7_FEATURES macro done by Ben W. and others.

Use it for i965g, i965gm, g45 and gm45.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_GMBUS_IRQ definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN5_FEATURES for device info

Introducing a GEN5_FEATURES macro to simplify the struct
definitions by platforms given that most of the features are common.
Inspired by the GEN7_FEATURES macro done by Ben W. and others.

Use it for ilk.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_DP_MST definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RC6p definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RC6 definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RESOURCE_STREAMER definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915 Move HAS_CSR definition to platform definition

Moving all GPU features to the platform struct definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Get rid of HAS_CORE_RING_FREQ

No need for HAS_CORE_RING_FREQ as that flag is actually the same as
.has_llc. Feedback from V. Syrjala.

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove runtime PM for SNB

Remove runtime PM support for SNB as it breaks hotplug support.
Feedback from V. Syrjala.

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RUNTIME_PM definition to platform

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN6_FEATURES for device info

Introducing a GEN6_FEAUTRES macro to simplify the struct definitions by
platforms given that most of the features are common. Inspired by the
GEN7_FEATURES macro done by Ben W. and others.

Use it for snb.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove .is_mobile field from platform struct

As recommended by Ville Syrjala removing .is_mobile field from the
platform struct definition for vlv and hsw+ GPUs as there's no need to
make the distinction in later hardware anymore. Keep it for older GPUs
as it is still needed for ilk-ivb.

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_PSR definition to platform struct definition

[patch series] Moving all GPU features to the platform struct definition
allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct definition

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split hsw_get_dpll()

Split out the DisplayPort and HDMI pll setup code into separate
functions and refactor the DP code that calculates the pll
so that it doesn't depend on crtc state.
This will be used for acquiring port pll when doing
upfront link training.

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split skl_get_dpll()

Split out the DisplayPort and HDMI pll setup code into separate
functions and refactor the DP code does not directly depend on
crtc state, so that the code can be used for upfront link training.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split bxt_ddi_pll_select()

Split out of bxt_ddi_pll_select() the logic that calculates the pll
dividers and dpll_hw_state into a new function that doesn't depend on
crtc state. This will be used for enabling the port pll when doing
upfront link training.

v2:
* Refactored code so that bxt_clk_div need not be exported (Durga)
v1:
* Rebased on top of intel_dpll_mgr.c (Durga)
* Initial version from Ander on top of intel_ddi.c

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split intel_ddi_pre_enable() into DP and HDMI versions

Split intel_ddi_pre_enable() into encoder type specific versions that
don't depend on crtc_state. The necessary parameters are passed as
function arguments. This split will be necessary for implementing DP
upfront link training.

v3:
* Rebased onto latest kernel (Manasi)
v2:
* Rebased onto kernel v4.7 (Jim)

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove ddi_pll_sel from intel_crtc_state

The value of ddi_pll_sel is derived from the selection of shared dpll,
so just calculate the final value when necessary.

v2: Actually remove it from crtc state and delete remaining usages. (CI)

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Don't pass crtc_state to intel_dp_set_link_params()

Decouple intel_dp_set_link_params() from struct intel_crtc_state. This
will be useful for implementing DP upfront link training.

v2:
* Rebased on atomic state changes (Manasi)

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Revert "drm/i915: Check live status before reading edid"

This reverts commit 237ed86c693d8a8e4db476976aeb30df4deac74b.

Our current implementation of live status check (repeat 9 times
with 10ms delays between each attempt as a workaround for
buggy displays) imposes a rather serious penalty, time wise,
on intel_hdmi_detect().  Since we we already skip live status
checks on platforms before gen 7, and since we seem to have
coped quite well before the live status check was introduced
for newer platforms too, the previous behaviour is probably
preferable, at least unless someone can point to a use-case
that the live status check improves (apart from "Bspec says so".)

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid")
Fixes: f8d03ea0053b ("drm/i915: increase the tries for HDMI hotplug live status checking")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97139
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94014
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160817124748.31208-1-david.weinehall@linux.intel.com

drm/i915/skl: Don't try to update plane watermarks if they haven't changed

i915 sometimes needs to disable planes in the middle of an atomic
commit, and then reenable them later in the same commit. Because of
this, we can't make the assumption that the state of the plane actually
changed. Since the state of the plane hasn't actually changed, neither
have it's watermarks. And if the watermarks hasn't changed then we
haven't populated skl_results with anything, which means we'll end up
zeroing out a plane's watermarks in the middle of the atomic commit
without restoring them later.

Simple reproduction recipe:
 - Get a SKL laptop, launch any kind of X session
 - Get two extra monitors
 - Keep hotplugging both displays (so that the display configuration
   jumps from 1 active pipe to 3 active pipes and back)
 - Eventually underrun

Changes since v1:
 - Fix incorrect use of "it's"
Changes since v2:
 - Add reproduction recipe

Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 62e0fb880123 ("drm/i915/skl: Update plane watermarks atomically during plane updates")
Signed-off-by: Lyude <cpaul@redhat.com>
Testcase: kms_plane
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472488288-27280-1-git-send-email-cpaul@redhat.com
Cc: drm-intel-fixes@lists.freedesktop.org

drm/i915: Remove 64b mmio write vfuncs

We don't have safe 64-bit mmio writes as they are really split into
2x32-bit writes. This tearing is dangerous as the hardware *will*
operate on the intermediate value, requiring great care when assigning.
(See, for example, i965_write_fence_reg.) As such we don't currently use
them and strongly advise not to us them. Go one step further and remove
the 64-bit write vfuncs.

v2: Add some more details to the comment about why WRITE64 is absent,
and why you need to think twice before using READ64.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906144538.4204-1-chris@chris-wilson.co.uk

drm/i915: disable 48bit full PPGTT when vGPU is active

Disable 48bit full PPGTT on vGPU too for now.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-3-zhenyuw@linux.intel.com

drm/i915: enable vGPU detection for all

vGPU capability is handled by GVT-g host driver, not needed to
put extra HW check for vGPU detection. And we'll actually support
vGPU from BDW.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-2-zhenyuw@linux.intel.com

drm/i915: Don't wait for a spinlock inside error capture

If we can't grab the breadcrumb's spinlock, possibly due to a driver
deadlock inside the waiters, ignore them. Like hangcheck, error
capturing must work no matter how the driver/GPU dies.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906073844.22561-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/guc: revisit GuC loader message levels

Some downgraded from DRM_ERROR() to DRM_WARN() or DRM_NOTE(),
a few upgraded from DRM_INFO() to DRM_NOTE() or DRM_WARN(),
and one eliminated completely.

v2: different permutation of levels :)
v3: convert a couple of "this shouldn't happen" messages to WARN()

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/guc: downgrade some DRM_ERROR() messages to DRM_WARN()

Where we're going to continue regardless of the problem, rather than
fail, then the message should be a WARNing rather than an ERROR.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm: extra printk() wrapper macros

We had only DRM_INFO() and DRM_ERROR(), whereas the underlying printk()
provides several other useful intermediate levels such as NOTICE and
WARNING. So this patch fills out the set by providing both regular and
once-only macros for each of the levels INFO, NOTICE, and WARNING, using
a common underlying macro that does all the token-pasting.

DRM_ERROR is unchanged, as it's not just a printk wrapper.

v2:
    Fix whitespace, missing ## (Eric Engestrom)

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: debugfs/i915_gem_interrupt_info does not need struct_mutex

i915_gem_interrupt_info() only looks at mmio registers, and the waiters
under a spinlock. It doesn't need struct_mutex (but does need the rpm
wakelock for mmio access). Maybe useful using get_if_notidle?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160903065343.25151-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: debugfs/i915_gem_seqno_info does not need rpm nor struct_mutex

i915_gem_seqno_info() supplies its own spinlocks to access the waiters,
and doesn't need any GGTT or mmio access.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160903065343.25151-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915/bdw: sseu: Fix sseu status parsing

Currently when checking for fused off EUs we may ignore the EU count in
an enabled slice if there is any disabled slice preceding the enabled
one (with a lower slice ID). Perhaps this can't happen in reality, but
there is no reason to have this assumption built-in, the code is clearer
without it.

Reviewed-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-8-git-send-email-imre.deak@intel.com

drm/i915: sseu: Add debug printf for slice/subslice masks

Reviewed-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-7-git-send-email-imre.deak@intel.com

drm/i915: sseu: Convert subslice count fields to subslice mask

In an upcoming patch we'll need the actual mask of subslices in addition
to their count, so convert the subslice_per_slice field to a mask.
Also we can easily calculate subslice_total from the other fields, so
instead of storing a cached version of this, add a helper to calculate
it.

v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: sseu: Convert slice count field to mask

In an upcoming patch we'll need the actual mask of slices in addition to
their count, so replace the count field with a mask.

v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-5-git-send-email-imre.deak@intel.com

drm/i915: sseu: Simplify debugfs status/info printing

Reviewed-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-4-git-send-email-imre.deak@intel.com

drm/i915: sseu: Use sseu_dev_info in device info

Move all slice/subslice/eu related properties to the sseu_dev_info
struct.

No functional change.

v2:
- s/info/sseu/ based on the new struct name. (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: sseu: Move sseu_dev_status to i915_drv.h

The data in this struct is provided both by getting the
slice/subslice/eu features available on a given platform and the actual
runtime state of these same features which depends on the HW's current
power saving state.

Atm members of this struct are duplicated in sseu_dev_status and
intel_device_info. For clarity and code reuse we can share one struct
for both of the above purposes. This patch only moves the struct to the
header file, the next patch will convert users of intel_device_info to
use this struct too.

Instead of unsigned int u8 is used now, which is big enough and is used
anyway in intel_device_info.

No functional change.

v2:
- s/stat/sseu/ based on the new struct name (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-2-git-send-email-imre.deak@intel.com

drm/i915: Cleanup i915_param()

Rather than having a separate case for each value where we just return
a hardcoded value = 1, we lump them all together and rely on the awesome
case-fallthrough feature of C.

Fix all feature macros to pass dev_priv instead of dev while at it,
and use INTEL_GEN() instead of INTEL_INFO()->gen.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160902104617.29089-1-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Drop mutex around clearing error state

The error state itself is guarded by a spinlock (admittedly even that is
overkill for a single pointer!) and doesn't require us to take the
struct_mutex in the debugfs/sysfs interface. Removing the struct_mutex
removes one more potential blockage when trying to debug a deadlock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901205510.31307-1-chris@chris-wilson.co.uk
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com

drm/i915: Update DRIVER_DATE to 20160902

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use atomic for dev_priv->mm.bsd_engine_dispatch_index

Use atomic type and operands for dev_priv->mm.bsd_engine_dispatch_index
to avoid one struct_mutex locking scenario.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1472731101-21982-1-git-send-email-joonas.lahtinen@linux.intel.com

drm/i915: Fix other intel_dp warnings too.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/backlight: handle enabled but zero duty cycle at module load

Don't consider enabled but zero duty cycle backlight disabled. Clamp
level between min and max for sanity.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471939811-9817-1-git-send-email-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Fix intel_display_crc_init for !DEBUGFS

The mentioned commit changes intel_display_crc_init to take a dev_priv,
but forgets to change the stub.

Cc: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 36cdd0138b7f ("drm/i915: debugfs spring cleaning")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-and-by: Kim Lidström <kim@dxtr.im>
Link: http://patchwork.freedesktop.org/patch/msgid/1472116022-17598-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: Add missing parameter to intel_dp_set_drrs_state documentation.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472116022-17598-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: remove leftover for_each_intel_crtc_masked

The last user of for_each_intel_crtc_masked macro was removed in

commit 0a9ab303b87a94115e361a7f3a15d9f481bc453b
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Apr 21 17:13:04 2015 +0300

    drm/i915: Remove all *_pipes flags from modeset

Get rid of the unused macro.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472126651-13825-1-git-send-email-jani.nikula@intel.com

drm/i915: Make for_each_engine_masked() more compact and quicker

Rather than walk the full array of engines checking whether each is in
the mask in turn, we can use the mask to jump to the right engines. This
should quicker for a sparse array of engines or mask, whilst generating
smaller code:

   text    data     bss     dec     hex filename
1251010    4579     800 1256389  132bc5 drivers/gpu/drm/i915/i915.ko
1250530    4579     800 1255909  1329e5 drivers/gpu/drm/i915/i915.ko

The downside is that we have to pass in a temporary, alas no C99
iterators yet.

[P.S. Joonas doesn't like having to pass extra temporaries into the
macro, and even less that I called them tmp. As yet, we haven't found a
macro that avoids passing in a temporary that is smaller. We probably
will get C99 iterators first!]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160827075401.16470-2-chris@chris-wilson.co.uk

drm/i915: Tidy reporting busy status during i915_gem_retire_requests()

As we know by inspection whether any engine is still busy as we retire
all the requests, we can pass that information back via return value
rather than check again afterwards.

v2: A little more polish missed in patch splitting

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160827075401.16470-1-chris@chris-wilson.co.uk

drm/i915: Allow the user to pass a context to any ring

With full-ppgtt, we want the user to have full control over their memory
layout, with a separate instance per context. Forcing them to use a
shared memory layout for !RCS not only duplicates the amount of work we
have to do, but also defeats the memory segregation on offer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822080350.4964-4-chris@chris-wilson.co.uk
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB

According to the CI test machines, SNB also uses the
GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE value to report a bad
GEN6_PCODE_MIN_FREQ_TABLE request.

[  157.744641] WARNING: CPU: 5 PID: 9238 at
drivers/gpu/drm/i915/intel_pm.c:7760 sandybridge_pcode_write+0x141/0x200 [i915]
[  157.744642] Missing switch case (16) in gen6_check_mailbox_status
[  157.744642] Modules linked in: snd_hda_intel i915 ax88179_178a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me lpc_ich snd_pcm mei broadcom bcm_phy_lib tg3 ptp pps_core [last unloaded: vgem]
[  157.744658] CPU: 5 PID: 9238 Comm: drv_hangman Tainted: G     U  W 4.8.0-rc3-CI-CI_DRM_1589+ #1
[  157.744658] Hardware name: Dell Inc. XPS 8300  /0Y2MRG, BIOS A06 10/17/2011
[  157.744659]  0000000000000000 ffff88011f093a98 ffffffff81426415 ffff88011f093ae8
[  157.744662]  0000000000000000 ffff88011f093ad8 ffffffff8107d2a6 00001e50810d3c9f
[  157.744663]  ffff880128680000 0000000000000008 0000000000000000 ffff88012868a650
[  157.744665] Call Trace:
[  157.744669]  [<ffffffff81426415>] dump_stack+0x67/0x92
[  157.744672]  [<ffffffff8107d2a6>] __warn+0xc6/0xe0
[  157.744673]  [<ffffffff8107d30a>] warn_slowpath_fmt+0x4a/0x50
[  157.744685]  [<ffffffffa0029831>] sandybridge_pcode_write+0x141/0x200 [i915]
[  157.744697]  [<ffffffffa002a88a>] intel_enable_gt_powersave+0x64a/0x1330 [i915]
[  157.744712]  [<ffffffffa006b4cb>] ? i9xx_emit_request+0x1b/0x80 [i915]
[  157.744725]  [<ffffffffa0055ed3>] __i915_add_request+0x1e3/0x370 [i915]
[  157.744738]  [<ffffffffa00428bd>] i915_gem_do_execbuffer.isra.16+0xced/0x1b80 [i915]
[  157.744740]  [<ffffffff811a232e>] ? __might_fault+0x3e/0x90
[  157.744752]  [<ffffffffa0043b72>] i915_gem_execbuffer2+0xc2/0x2a0 [i915]
[  157.744753]  [<ffffffff815485b7>] drm_ioctl+0x207/0x4c0
[  157.744765]  [<ffffffffa0043ab0>] ? i915_gem_execbuffer+0x360/0x360 [i915]
[  157.744767]  [<ffffffff810ea4ad>] ?  debug_lockdep_rcu_enabled+0x1d/0x20
[  157.744769]  [<ffffffff811fe09e>] do_vfs_ioctl+0x8e/0x680
[  157.744770]  [<ffffffff811a2377>] ? __might_fault+0x87/0x90
[  157.744771]  [<ffffffff811a232e>] ? __might_fault+0x3e/0x90
[  157.744773]  [<ffffffff810d3df2>] ?  trace_hardirqs_on_caller+0x122/0x1b0
[  157.744774]  [<ffffffff811fe6cc>] SyS_ioctl+0x3c/0x70
[  157.744776]  [<ffffffff8180fe69>] entry_SYSCALL_64_fastpath+0x1c/0xac

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97491
Fixes: 87660502f1a4 ("drm/i915/gen6+: Interpret mailbox error flags")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160826105926.3413-1-chris@chris-wilson.co.uk
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915/debugfs: Add panel delays for eDP

The eDP backlight and panel enable/disable delays are quite
useful to know when measuring time consumed by suspend/resume,
and while the information is printed to the kernel log as debug
messages, having this information in debugfs makes things easier.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823092356.7610-1-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Add I915_PARAM_MMAP_GTT_VERSION to advertise unlimited mmaps

Now that we have working partial VMA and faulting support for all
objects, including fence support, advertise to userspace that it can
take advantage of unlimited GGTT mmaps.

v2: Make room in the kerneldoc for a more detailed explanation of the
limitations of the GTT mmap interface.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160825180519.11341-1-chris@chris-wilson.co.uk

drm/i915/skl: Update DDB values atomically with wms/plane attrs

Now that we can hook into update_crtcs and control the order in which we
update CRTCs at each modeset, we can finish the final step of fixing
Skylake's watermark handling by performing DDB updates at the same time
as plane updates and watermark updates.

The first major change in this patch is skl_update_crtcs(), which
handles ensuring that we order each CRTC update in our atomic commits
properly so that they honor the DDB flush order.

The second major change in this patch is the order in which we flush the
pipes. While the previous order may have worked, it can't be used in
this approach since it no longer will do the right thing. For example,
using the old ddb flush order:

We have pipes A, B, and C enabled, and we're disabling C. Initial ddb
allocation looks like this:

|   A   |   B   |xxxxxxx|

Since we're performing the ddb updates after performing any CRTC
disablements in intel_atomic_commit_tail(), the space to the right of
pipe B is unallocated.

1. Flush pipes with new allocation contained into old space. None
   apply, so we skip this
2. Flush pipes having their allocation reduced, but overlapping with a
   previous allocation. None apply, so we also skip this
3. Flush pipes that got more space allocated. This applies to A and B,
   giving us the following update order: A, B

This is wrong, since updating pipe A first will cause it to overlap with
B and potentially burst into flames. Our new order (see the code
comments for details) would update the pipes in the proper order: B, A.

As well, we calculate the order for each DDB update during the check
phase, and reference it later in the commit phase when we hit
skl_update_crtcs().

This long overdue patch fixes the rest of the underruns on Skylake.

Changes since v1:
 - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm()
Changes since v2:
 - Use the method for updating CRTCs that Ville suggested
 - In skl_update_wm(), only copy the watermarks for the crtc that was
   passed to us
Changes since v3:
 - Small comment fix in skl_ddb_allocation_overlaps()
Changes since v4:
 - Remove the second loop in intel_update_crtcs() and use Ville's
   suggestion for updating the ddb allocations in the right order
 - Get rid of the second loop and just use the ddb state as it updates
   to determine what order to update everything in (thanks for the
   suggestion Ville)
 - Simplify skl_ddb_allocation_overlaps()
 - Split actual overlap checking into it's own helper

Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration")
Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation")
[omitting CC for stable, since this patch will need to be changed for
such backports first]

Testcase: kms_cursor_legacy
Testcase: plane-all-modeset-transition
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com

drm/i915: Move CRTC updating in atomic_commit into it's own hook

Since we have to write ddb allocations at the same time as we do other
plane updates, we're going to need to be able to control the order in
which we execute modesets on each pipe. The easiest way to do this is to
just factor this section of intel_atomic_commit_tail()
(intel_atomic_commit() for stable branches) into it's own function, and
add an appropriate display function hook for it.

Based off of Matt Rope's suggestions

Changes since v1:
 - Drop pipe_config->base.active check in intel_update_crtcs() since we
   check that before calling the function

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[omitting CC for stable, since this patch will need to be changed for
such backports first]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-1-git-send-email-cpaul@redhat.com

drm/i915: Restore lost "Initialized i915" welcome message

A side effect of removing the midlayer from driver loading was the loss
of a useful message announcing to userspace that i915 had successfully
started, e.g.:

[drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0

Reported-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 8f460e2c78f2 ("drm/i915: Demidlayer driver loading")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160825072314.17402-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Force RC6 restore after system resume and reset

In order for the RC6 autoenable worker to take any action, RC6 first
must be disabled. Upon resume or reset, the sw state may be stale and so
we require a forced restore.

Fixes: b7137e0cf1e5 ("drm/i915: Defer enabling rc6 til after we submit...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160824092701.19178-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Suppress DRM_ERROR for D_COMP write on Haswell

The D_COMP (render decompression) register write is followed by a status
check and another error (either that the decompression shutdown or the
lpll is enabled). Since we are followed by another, more pertinent,
error we can reduce the pcode timeout to a debug and squelch a sporadic
error message during suspend.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97465
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160824101607.13671-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

Revert "drm/i915/fbc: Allow on unfenced surfaces, for recent gen"

This reverts commit 8678fdaf396c ("drm/i915/fbc: Allow on unfenced surfaces,
for recent gen") as Skylake has issues with unfenced FBC tracking (and
yes Skylake doesn't even enable FBC yet). Paulo would like to do a full
review of all existing workarounds to see if any more are missing prior
to allowing FBC on unfenced surfaces. In the meantime lets hope that all
framebuffers are idle and naturally fit within the mappable aperture.

Requested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: 8678fdaf396c ("drm/i915/fbc: Allow on unfenced surfaces...");
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160824180053.24239-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Eliminate redundant local variable definition

No functional change, just clean up.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470897673-29292-3-git-send-email-dhinakaran.pandiyan@intel.com

drm/i915/dp: Dump DP link status when link training stages fail

A full dump of link status can be handy in debugging link training
failures. Let's add that to the debug messages when link training fails.

v2: Removing unrelated clean up (Jani)
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470343716-5574-3-git-send-email-dhinakaran.pandiyan@intel.com

drm/i915/dp: Add debug messages to print DP link training pattern

Currently we do not print the training pattern used in any of the DP link
training stages. Including this piece of information in debug messages will
help debugging.

Also, use the wrapper intel_dp_program_link_training_pattern() in
intel_dp_enable_port() instead of implementing it.

v2: Downgraded log level from error to debug (Chris)

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470343716-5574-2-git-send-email-dhinakaran.pandiyan@intel.com

drm/i915: free intel_fb

We need to free the allocated intel_fb in the error path, not
intel_fb->base. Otherwise we risk calling kfree with a non-kmalloc'd
address, which is bound to give us grief at some point.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471964444-24460-1-git-send-email-matthew.auld@intel.com

drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()

If we hit the error path, we have never called drm_encoder_init() and so
have nothing to cleanup. Doing so hits a null dereference:

[   10.066261] BUG: unable to handle kernel NULL pointer dereference at 00000104
[   10.066273] IP: [<c16054b4>] mutex_lock+0xa/0x15
[   10.066287] *pde = 00000000
[   10.066295] Oops: 0002 [#1]
[   10.066302] Modules linked in: i915(+) video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm iTCO_wdt iTCO_vendor_support ppdev evdev snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm snd_timer snd pcspkr uhci_hcd ehci_pci soundcore sr_mod ehci_hcd serio_raw i2c_i801 usbcore i2c_smbus cdrom lpc_ich mfd_core rng_core e100 mii floppy parport_pc parport acpi_cpufreq button processor usb_common eeprom lm85 hwmon_vid autofs4
[   10.066378] CPU: 0 PID: 132 Comm: systemd-udevd Not tainted 4.8.0-rc3-00013-gef0e1ea #34
[   10.066389] Hardware name: MicroLink                               /D865GLC                        , BIOS BF86510A.86A.0077.P25.0508040031 08/04/2005
[   10.066401] task: f62db800 task.stack: f5970000
[   10.066409] EIP: 0060:[<c16054b4>] EFLAGS: 00010286 CPU: 0
[   10.066417] EIP is at mutex_lock+0xa/0x15
[   10.066424] EAX: 00000104 EBX: 00000104 ECX: 00000000 EDX: 80000000
[   10.066432] ESI: 00000000 EDI: 00000104 EBP: f5be8000 ESP: f5971b58
[   10.066439]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[   10.066446] CR0: 80050033 CR2: 00000104 CR3: 35945000 CR4: 000006d0
[   10.066453] Stack:
[   10.066459]  f503d740 f824dddf 00000000 f61170c0 f61170c0 f82371ae f850f40e 00000001
[   10.066476]  f61170c0 f5971bcc f5be8000 f9c2d401 00000001 f8236fcc 00000001 00000000
[   10.066491]  f5144014 f5be8104 00000008 f9c5267c 00000007 f61170c0 f5144400 f9c4ff00
[   10.066507] Call Trace:
[   10.066526]  [<f824dddf>] ? drm_modeset_lock_all+0x27/0xb3 [drm]
[   10.066545]  [<f82371ae>] ? drm_encoder_cleanup+0x1a/0x132 [drm]
[   10.066559]  [<f850f40e>] ? drm_atomic_helper_connector_reset+0x3f/0x5c [drm_kms_helper]
[   10.066644]  [<f9c2d401>] ? intel_dvo_init+0x569/0x788 [i915]
[   10.066663]  [<f8236fcc>] ? drm_encoder_init+0x43/0x20b [drm]
[   10.066734]  [<f9bf1fce>] ? intel_modeset_init+0x1436/0x17dd [i915]
[   10.066791]  [<f9b37636>] ? i915_driver_load+0x85a/0x15d3 [i915]
[   10.066846]  [<f9b3603d>] ? i915_driver_open+0x5/0x5 [i915]
[   10.066857]  [<c14af4d0>] ? firmware_map_add_entry.part.2+0xc/0xc
[   10.066868]  [<c1343daf>] ? pci_device_probe+0x8e/0x11c
[   10.066878]  [<c140cec8>] ? driver_probe_device+0x1db/0x62e
[   10.066888]  [<c120c010>] ? kernfs_new_node+0x29/0x9c
[   10.066897]  [<c13438e0>] ? pci_match_device+0xd9/0x161
[   10.066905]  [<c120c48b>] ? kernfs_create_dir_ns+0x42/0x88
[   10.066914]  [<c140d401>] ? __driver_attach+0xe6/0x11b
[   10.066924]  [<c1303b13>] ? kobject_add_internal+0x1bb/0x44f
[   10.066933]  [<c140d31b>] ? driver_probe_device+0x62e/0x62e
[   10.066941]  [<c140a2d2>] ? bus_for_each_dev+0x46/0x7f
[   10.066950]  [<c140c502>] ? driver_attach+0x1a/0x34
[   10.066958]  [<c140d31b>] ? driver_probe_device+0x62e/0x62e
[   10.066966]  [<c140b758>] ? bus_add_driver+0x217/0x32a
[   10.066975]  [<f8403000>] ? 0xf8403000
[   10.066982]  [<c140de27>] ? driver_register+0x5f/0x108
[   10.066991]  [<c1000493>] ? do_one_initcall+0x49/0x1f6
[   10.067000]  [<c1082299>] ? pick_next_task_fair+0x14b/0x2a3
[   10.067008]  [<c1603c8d>] ? __schedule+0x15c/0x4fe
[   10.067016]  [<c1604104>] ? preempt_schedule_common+0x19/0x3c
[   10.067027]  [<c11051de>] ? do_init_module+0x17/0x230
[   10.067035]  [<c1604139>] ? _cond_resched+0x12/0x1a
[   10.067044]  [<c116f9aa>] ? kmem_cache_alloc+0x8f/0x11f
[   10.067052]  [<c11051de>] ? do_init_module+0x17/0x230
[   10.067060]  [<c11703dd>] ? kfree+0x137/0x203
[   10.067068]  [<c110523d>] ? do_init_module+0x76/0x230
[   10.067078]  [<c10cadf3>] ? load_module+0x2a39/0x333f
[   10.067087]  [<c10cb8b2>] ? SyS_finit_module+0x96/0xd5
[   10.067096]  [<c1132231>] ? vm_mmap_pgoff+0x79/0xa0
[   10.067105]  [<c1001e96>] ? do_fast_syscall_32+0xb5/0x1b0
[   10.067114]  [<c16086a6>] ? sysenter_past_esp+0x47/0x75
[   10.067121] Code: c8 f7 76 c1 e8 8e cc d2 ff e9 45 fe ff ff 66 90 66 90 66 90 66 90 90 ff 00 7f 05 e8 4e 0c 00 00 c3 53 89 c3 e8 75 ec ff ff 89 d8 <ff> 08 79 05 e8 fa 0a 00 00 5b c3 53 89 c3 85 c0 74 1b 8b 03 83
[   10.067180] EIP: [<c16054b4>] mutex_lock+0xa/0x15 SS:ESP 0068:f5971b58
[   10.067190] CR2: 0000000000000104
[   10.067222] ---[ end trace 049f1f09da45a856 ]---

Reported-by: Meelis Roos <mroos@linux.ee>
Fixes: 580d8ed522e0 ("drm/i915: Give encoders useful names")
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823092558.14931-1-chris@chris-wilson.co.uk

drm/i915: Cleanup crt disable sequence on hsw+

Instead of iterating overthe connectors manually, run the last part of
DDI disabling inside the crt post disable function.

This was meant to be addressed before submitting the other commit,
but I missed the review comments.

Fixes: fd6bbda9c7a4 ("drm/i915: Pass crtc_state and connector_state to encoder functions")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961888-10771-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Fix extra whitespace between functions.]

drm/i915: Create a intel_encoder_find_connector helper function.

This makes the code in intel_sanitize_encoder slightly more readable.
This was meant to be addressed in fd6bbda9c7a4, but I missed that
review comment.

Fixes: fd6bbda9c7a4 ("drm/i915: Pass crtc_state and connector_state to encoder functions")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961888-10771-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Fix unused variable reported by kbuild.]

io-mapping: Fixup for different names of writecombine

Somehow architectures can't agree on this. And for good measure make
sure we have a fallback which should work everywhere (fingers
crossed).

v2: Make it compile properly, needs a defined() for the #elif.

Fixes: ac96b5566926 ("io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: linux-mm@kvack.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823202233.4681-1-daniel.vetter@ffwll.ch

io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/

PAGE_KERNEL_IO is an x86-ism. Though it is used to define the pgprot_t
used for the iomapped region, it itself is just PAGE_KERNEL. On all
other arches, PAGE_KERNEL_IO is undefined so in a general header we must
refrain from using it.

v2: include pgtable for pgprot_combine()

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: linux-mm@kvack.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823155024.22379-1-chris@chris-wilson.co.uk

drm/i915/skl: Update plane watermarks atomically during plane updates

Thanks to Ville for suggesting this as a potential solution to pipe
underruns on Skylake.

On Skylake all of the registers for configuring planes, including the
registers for configuring their watermarks, are double buffered. New
values written to them won't take effect until said registers are
"armed", which is done by writing to the PLANE_SURF (or in the case of
cursor planes, the CURBASE register) register.

With this in mind, up until now we've been updating watermarks on skl
like this:

  non-modeset {
   - calculate (during atomic check phase)
   - finish_atomic_commit:
     - intel_pre_plane_update:
        - intel_update_watermarks()
     - {vblank happens; new watermarks + old plane values => underrun }
     - drm_atomic_helper_commit_planes_on_crtc:
        - start vblank evasion
        - write new plane registers
        - end vblank evasion
  }

  or

  modeset {
   - calculate (during atomic check phase)
   - finish_atomic_commit:
     - crtc_enable:
        - intel_update_watermarks()
     - {vblank happens; new watermarks + old plane values => underrun }
     - drm_atomic_helper_commit_planes_on_crtc:
        - start vblank evasion
        - write new plane registers
        - end vblank evasion
  }

Now we update watermarks atomically like this:

  non-modeset {
   - calculate (during atomic check phase)
   - finish_atomic_commit:
     - intel_pre_plane_update:
        - intel_update_watermarks() (wm values aren't written yet)
     - drm_atomic_helper_commit_planes_on_crtc:
        - start vblank evasion
        - write new plane registers
        - write new wm values
        - end vblank evasion
  }

  modeset {
   - calculate (during atomic check phase)
   - finish_atomic_commit:
     - crtc_enable:
        - intel_update_watermarks() (actual wm values aren't written
          yet)
     - drm_atomic_helper_commit_planes_on_crtc:
        - start vblank evasion
        - write new plane registers
- write new wm values
        - end vblank evasion
  }

So this patch moves all of the watermark writes into the right place;
inside of the vblank evasion where we update all of the registers for
each plane. While this patch doesn't fix everything, it does allow us to
update the watermark values in the way the hardware expects us to.

Changes since original patch series:
 - Remove mutex_lock/mutex_unlock since they don't do anything and we're
   not touching global state
 - Move skl_write_cursor_wm/skl_write_plane_wm functions into
   intel_pm.c, make externally visible
 - Add skl_write_plane_wm calls to skl_update_plane
 - Fix conditional for for loop in skl_write_plane_wm (level < max_level
   should be level <= max_level)
 - Make diagram in commit more accurate to what's actually happening
 - Add Fixes:

Changes since v1:
 - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more
   then just Skylake
 - Update description to make it clear this patch doesn't fix everything
 - Check if pipes were actually changed before writing watermarks

Changes since v2:
 - Write PIPE_WM_LINETIME during vblank evasion

Changes since v3:
 - Rebase against new SAGV patch changes

Changes since v4:
 - Add a parameter to choose what skl_wm_values struct to use when
   writing new plane watermarks

Changes since v5:
 - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until
   patch 6
 - Write WM_LINETIME in intel_begin_crtc_commit()

Changes since v6:
 - Remove redundant dirty_pipes check in skl_write_plane_wm (we check
   this in all places where we call this function, and it was supposed
   to have been removed earlier anyway)
 - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of
   IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this
   needs to be done for gen10 as well

Changes since v7:
 - Fix rebase fail (unused variable obj)
 - Make struct skl_wm_values *wm const
 - Fix indenting
 - Use INTEL_GEN() instead of dev_priv->info.gen

Changes since v8:
 - Don't forget calls to skl_write_plane_wm() when disabling planes
 - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit()

Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation")
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com

drm/i915: Use more atomic state in intel_color.c

crtc_state is already passed around, use it instead of crtc->config.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-16-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Convert intel_dp to use atomic state

Slightly less straightforward. Some of the drrs calls are done from
workers or from intel_ddi.c, pass along crtc_state when we can,
or crtc->config when we can't.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-15-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Convert intel_dp_mst to use atomic state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-14-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Address bikeshed.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Convert intel_lvds to use atomic state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-13-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Small fixup wrt register renames.]

drm/i915: Convert intel_sdvo to use atomic state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-12-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Convert intel_dsi to use atomic state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-11-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Unbreak bxt_dsi_get_pipe_config]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Convert intel_dvo to use atomic state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-10-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Convert intel_crt to use atomic state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-9-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove unused loop from intel_dp_mst_compute_config

Now that conn_state is passed in as argument to compute_config, it's
guaranteed that there is a connector for the argument. The code that
looks for the connector is now dead, and completely unused. Delete it.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-8-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Make encoder->compute_config take the connector state

Some places iterate over connector_state to find the right
connector, pass it along as argument.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-7-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Pass crtc_state and connector_state to encoder functions

This is mostly code churn, with exception of a few places:
- intel_display.c has changes in intel_sanitize_encoder
- intel_ddi.c has intel_ddi_fdi_disable calling intel_ddi_post_disable,
  and required a function change. Also affects intel_display.c
- intel_dp_mst.c passes a NULL crtc_state and conn_state to
  intel_ddi_post_disable for shutting down the real encoder.

  If we would pass conn_state, then conn_state->connector !=
  intel_dig_port->connector and conn_state->best_encoder !=
  to_intel_encoder(intel_dig_port).

  We also shouldn't pass crtc_state, because in that case the
  disabling sequence may potentially be different depending on
  which crtc is disabled last. Nice way to introduce bugs.

No other functional changes are done, diff stat is already huge.
Each encoder type will need to be fixed to use the atomic states
separately.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-6-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Walk over encoders in crtc enable/disable using atomic state.

This cleans up another possible use of the connector list,
encoder->crtc is legacy state and should not be used.

With the atomic state as argument it's easy to find the encoder from
the connector it belongs to.

intel_opregion_notify_encoder is a noop for !HAS_DDI, so it's harmless
to unconditionally include it in encoder enable/disable.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove unused mode_set hook from encoder

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Pass atomic state to crtc enable/disable functions

This is required for supporting nonblocking modesets. Iterating over
the connector list will no longer be allowed when we don't hold
connection_mutex, so we have to use the atomic state.

Fix disable_noatomic by populating the minimal state required to
disable a connector.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: handle DP_MST correctly in bxt_get_dpll

No idea if it supports it, but this is the minimum required from get_dpll.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Take forcewake once for the entire GMBUS transaction

As we do many register reads within a very short period of time, hold
the GMBUS powerwell from start to finish.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819164503.17845-1-chris@chris-wilson.co.uk
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>