git.openwrt.org Git - openwrt/staging/blogic.git/log

mailbox: bcm-pdc: Convert from threaded IRQ to tasklet

Previously used threaded IRQs in the PDC driver to defer
processing the rx DMA ring after getting an rx done interrupt.
Instead, use a tasklet at normal priority for deferred processing.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: bcm-pdc: Try to improve branch prediction

Use likely/unlikely directives to improve branch prediction.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: bcm-pdc: streamline rx code

Remove the unnecessary rmb() from the receive path.

If the rx ring has multiple messages ready, avoid reading
last_rx_curr multiple times from the register.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: bcm-pdc: Convert from interrupts to poll for tx done

The PDC driver is a mailbox controller. A mailbox controller
can report that a mailbox message has been "transmitted" either when
a tx interrupt fires or by having the mailbox framework poll. This
commit converts the PDC driver to the poll method. We found that the
tx interrupt happens when the descriptors are read by the SPU hw. Thus,
the interrupt method does not allow more than one tx message in the PDC
tx DMA ring at a time. To keep the SPU hw busy, we would like to keep
the tx ring full under heavy load.

With the poll method, the PDC driver responds that the previous message
has been transmitted if the tx ring has space for another message.
SPU request messages take a variable number of descriptors. If 15
descriptors are available, there is a good chance another message will
fit. Also increased the ring size from 128 to 512 descriptors.

With this change, I found the PDC driver hangs on its spinlock under
heavy load. The PDC spinlock is not required; so I removed it. Calls
to pdc_send_data() are already synchronized because of the channel
spinlock in the mailbox framework. Other references to ring indexes
should not require locking because they only written on either the
tx or rx side.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: bcm-pdc: PDC driver leaves debugfs files after removal

Minor fix to ensure that debugfs stats pseudo-files are
removed when driver module is unloaded. Previously, the call to
debugfs_remove_recursive() was never being called since the
directory was not empty, and a seg fault would occur if another
process tried to access these leftover files.

Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted

Ensure that DMA is disabled, and pointers reset, when changing
DMA base addresses in pdc_ring_init(). This allows a mailbox client
to be re-inserted after being removed. Otherwise, the DMA doesn't
restart so the client hangs while being reinserted.

Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: bcm-pdc: Use octal permissions rather than symbolic

When creating the debugfs files for the PDC driver, use
octal file permissions rather than symbolic file permissions.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: sti: Fix module autoload for OF registration

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/mailbox/mailbox-sti.ko | grep alias
alias:          platform:mailbox-sti

After this patch:

$ modinfo drivers/mailbox/mailbox-sti.ko | grep alias
alias:          platform:mailbox-sti
alias:          of:N*T*Cst,stih407-mailboxC*
alias:          of:N*T*Cst,stih407-mailbox

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: mailbox-test: Fix module autoload

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
$

After this patch:

$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
alias: of:N*T*Cmailbox-testC*
alias: of:N*T*Cmailbox-test

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Merge tag 'mmc-v4.9-rc5' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"MMC host:

   - sdhci-of-esdhc: Fix card detection
   - dw_mmc: Fix DMA error path"

* tag 'mmc-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc: fix the error handling for dma operation
  mmc: sdhci-of-esdhc: fixup PRESENT_STATE read

Merge tag 'usb-4.9-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a few small USB fixes and new device ids for 4.9-rc7.

  The majority of these fixes are in the musb driver, fixing a number of
  regressions that have been reported but took a while to resolve. The
  other fixes are all small ones, to resolve other reported minor
  issues.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match()
  phy: twl4030-usb: Fix for musb session bit based PM
  usb: musb: Drop pointless PM runtime code for dsps glue
  usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
  usb: musb: Fix PM for hub disconnect
  usb: musb: Fix sleeping function called from invalid context for hdrc glue
  usb: musb: Fix broken use of static variable for multiple instances
  USB: serial: cp210x: add ID for the Zone DPMX
  usb: chipidea: move the lock initialization to core file
  Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
  USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

- DMA-on-stack fixes for a couple drivers, from Benjamin Tissoires

- small memory sanitization fix for sensor-hub driver, from Song
   Hongyan

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-sensor-hub: clear memory to avoid random data
  HID: rmi: make transfer buffers DMA capable
  HID: magicmouse: make transfer buffers DMA capable
  HID: lg: make transfer buffers DMA capable
  HID: cp2112: make transfer buffers DMA capable

init: use pr_cont() when displaying rotator during ramdisk loading.

Otherwise each individual rotator char would be printed in a new line:

(...)
[    0.642350] -
[    0.644374] |
[    0.646367] -
(...)

Signed-off-by: Nicolas Schichan <nicolas.schichan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client bugfixes from Anna Schumaker:
"Most of these fix regressions or races, but there is one patch for
  stable that Arnd sent me

  Stable bugfix:
   - Hide array-bounds warning

  Bugfixes:
   - Keep a reference on lock states while checking
   - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
   - Don't call close if the open stateid has already been cleared
   - Fix CLOSE rases with OPEN
   - Fix a regression in DELEGRETURN"

* tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.x: hide array-bounds warning
  NFSv4.1: Keep a reference on lock states while checking
  NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
  NFSv4: Don't call close if the open stateid has already been cleared
  NFSv4: Fix CLOSE races with OPEN
  NFSv4.1: Fix a regression in DELEGRETURN

Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile bugfix from Chris Metcalf:
"This fixes a bug that causes reboots after 208 days of uptime :-)"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: avoid using clocksource_cyc2ns with absolute cycle count

tile: avoid using clocksource_cyc2ns with absolute cycle count

For large values of "mult" and long uptimes, the intermediate
result of "cycles * mult" can overflow 64 bits.  For example,
the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock;
we have mult = 853, and after 208.5 days, we overflow 64 bits.

Since clocksource_cyc2ns() is intended to be used for relative
cycle counts, not absolute cycle counts, performance is more
importance than accepting a wider range of cycle values.  So,
just use mult_frac() directly in tile's sched_clock().

Commit 4cecf6d401a0 ("sched, x86: Avoid unnecessary overflow
in sched_clock") by Salman Qazi results in essentially the same
generated code for x86 as this change does for tile.  In fact,
a follow-on change by Salman introduced mult_frac() and switched
to using it, so the C code was largely identical at that point too.

Peter Zijlstra then added mul_u64_u32_shr() and switched x86
to use it.  This is, in principle, better; by optimizing the
64x64->64 multiplies to be 32x32->64 multiplies we can potentially
save some time.  However, the compiler piplines the 64x64->64
multiplies pretty well, and the conditional branch in the generic
mul_u64_u32_shr() causes some bubbles in execution, with the
result that it's pretty much a wash.  If tilegx provided its own
implementation of mul_u64_u32_shr() without the conditional branch,
we could potentially save 3 cycles, but that seems like small gain
for a fair amount of additional build scaffolding; no other platform
currently provides a mul_u64_u32_shr() override, and tile doesn't
currently have an <asm/div64.h> header to put the override in.

Additionally, gcc currently has an optimization bug that prevents
it from recognizing the opportunity to use a 32x32->64 multiply,
and so the result would be no better than the existing mult_frac()
until such time as the compiler is fixed.

For now, just using mult_frac() seems like the right answer.

Cc: stable@kernel.org [v3.4+]
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>

HID: hid-sensor-hub: clear memory to avoid random data

When user tried to read some fields like hysteresis from IIO sysfs on some
systems, it fails. The reason is that this field is a byte field and caller
of sensor_hub_get_feature() passes a buffer of 4 bytes. Here the function
sensor_hub_get_feature() copies the single byte from the report to the
caller buffer and returns "1" as the number of bytes copied. So caller
can use the return value.

But this is done by multiple callers, so if we just change the
sensor_hub_get_feature so that caller buffer is initialized with 0s
then we don't to change all functions.

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: rmi: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: magicmouse: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: lg: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

[jkosina@suse.cz: fix up second usage of hid_hw_raw_request(), spotted by
0day build bot]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: cp2112: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

Use a spinlock to prevent concurrent accesses to the buffer.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Six fixes for bugs that were found via fuzzing, and a trivial
  hw-enablement patch for AMD Family-17h CPU PMUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Allow only a single PMU/box within an events group
  perf/x86/intel: Cure bogus unwind from PEBS entries
  perf/x86: Restore TASK_SIZE check on frame pointer
  perf/core: Fix address filter parser
  perf/x86: Add perf support for AMD family-17h processors
  perf/x86/uncore: Fix crash by removing bogus event_list[] handling for SNB client uncore IMC
  perf/core: Do not set cpuctx->cgrp for unscheduled cgroups

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"The last push broke algif_hash for all shash implementations, so this
  is a follow-up to fix that.

  This also fixes a problem in the crypto scatterwalk that triggers a
  BUG_ON with certain debugging options due to the new vmalloced-stack
  code"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copy
  crypto: algif_hash - Fix result clobbering in recvmsg

Merge branch 'for-rc' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fix from Zhang Rui:
"We only have one urgent fix this time.

  Commit 3105f234e0ab ("thermal/powerclamp: correct cpu support check"),
  which is shipped in 4.9-rc3, fixed a problem introduced by commit
  b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist").

  But unfortunately, it broke intel_powerclamp driver module auto-
  loading at the same time. Thus we need this change to add back module
  auto-loading for 4.9"

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/powerclamp: add back module device table

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two small fixes.

  One prevents timeouts on mpt3sas when trying to use the secure erase
  protocol which causes the erase protocol to be aborted. The second is
  a regression in a prior fix which causes all commands to abort during
  PCI extended error recovery, which is incorrect because PCI EEH is
  independent from what's happening on the FC transport"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: do not abort all commands in the adapter during EEH recovery
  scsi: mpt3sas: Fix secure erase premature termination

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A handful of driver fixes.

  The sunxi fixes are for an incorrect clk tree configuration and a bad
  frequency calculation. The other two are fixes for passing the wrong
  pointer in drivers recently converted to clk_hw style registration"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: efm32gg: Pass correct type to hw provider registration
  clk: berlin: Pass correct type to hw provider registration
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent

NFSv4.x: hide array-bounds warning

A correct bugfix introduced a harmless warning that shows up with gcc-7:

fs/nfs/callback.c: In function 'nfs_callback_up':
fs/nfs/callback.c:214:14: error: array subscript is outside array bounds [-Werror=array-bounds]

What happens here is that the 'minorversion == 0' check tells the
compiler that we assume minorversion can be something other than 0,
but when CONFIG_NFS_V4_1 is disabled that would be invalid and
result in an out-of-bounds access.

The added check for IS_ENABLED(CONFIG_NFS_V4_1) tells gcc that this
really can't happen, which makes the code slightly smaller and also
avoids the warning.

The bugfix that introduced the warning is marked for stable backports,
we want this one backported to the same releases.

Fixes: 98b0f80c2396 ("NFSv4.x: Fix a refcount leak in nfs_callback_up_net")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
"Two fixes for autogroup scheduling, for races when turning the feature
  on/off via /proc/sys/kernel/sched_autogroup_enabled"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/autogroup: Do not use autogroup->tg in zombie threads
  sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Misc fixes:
   - two fixes to make (very) old Intel CPUs boot reliably
   - fix the intel-mid driver and rename it
   - two KASAN false positive fixes
   - an FPU fix
   - two sysfb fixes
   - two build fixes related to new toolchain versions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt
  x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well
  x86/platform/intel-mid: Register watchdog device after SCU
  x86/fpu: Fix invalid FPU ptrace state after execve()
  x86/boot: Fail the boot if !M486 and CPUID is missing
  x86/traps: Ignore high word of regs->cs in early_fixup_exception()
  x86/dumpstack: Prevent KASAN false positive warnings
  x86/unwind: Prevent KASAN false positive warnings in guess unwinder
  x86/boot: Avoid warning for zero-filling .bss
  x86/sysfb: Fix lfb_size calculation
  x86/sysfb: Add support for 64bit EFI lfb_base

perf/x86/intel/uncore: Allow only a single PMU/box within an events group

Group validation expects all events to be of the same PMU; however
is_uncore_pmu() is too wide, it matches _all_ uncore events, even
across PMUs.

This triggers failure when we group different events from different
uncore PMUs, like:

perf stat -vv -e '{uncore_cbox_0/config=0x0334/,uncore_qpi_0/event=1/}' -a sleep 1

Fix is_uncore_pmu() by only matching events to the box at hand.

Note that generic code; ran after this step; will disallow this
mixture of PMU events.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20161118125354.GQ3117@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Cure bogus unwind from PEBS entries

Vince Weaver reported that perf_fuzzer + KASAN detects that PEBS event
unwinds sometimes do 'weird' things. In particular, we seemed to be
ending up unwinding from random places on the NMI stack.

While it was somewhat expected that the event record BP,SP would not
match the interrupt BP,SP in that the interrupt is strictly later than
the record event, it was overlooked that it could be on an already
overwritten stack.

Therefore, don't copy the recorded BP,SP over the interrupted BP,SP
when we need stack unwinds.

Note that its still possible the unwind doesn't full match the actual
event, as its entirely possible to have done an (I)RET between record
and interrupt, but on average it should still point in the general
direction of where the event came from. Also, it's the best we can do,
considering.

The particular scenario that triggered the bogus NMI stack unwind was
a PEBS event with very short period, upon enabling the event at the
tail of the PMI handler (FREEZE_ON_PMI is not used), it instantly
triggers a record (while still on the NMI stack) which in turn
triggers the next PMI. This then causes back-to-back NMIs and we'll
try and unwind the stack-frame from the last NMI, which obviously is
now overwritten by our own.

Analyzed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davej@codemonkey.org.uk <davej@codemonkey.org.uk>
Cc: dvyukov@google.com <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: ca037701a025 ("perf, x86: Add PEBS infrastructure")
Link: http://lkml.kernel.org/r/20161117171731.GV3157@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Restore TASK_SIZE check on frame pointer

The following commit:

  75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses")

... switched from copy_from_user_nmi() to __copy_from_user_nmi() with a manual
access_ok() check.

Unfortunately, copy_from_user_nmi() does an explicit check against TASK_SIZE,
whereas the access_ok() uses whatever the current address limit of the task is.

We are getting NMIs when __probe_kernel_read() has switched to KERNEL_DS, and
then see vmalloc faults when we access what looks like pointers into vmalloc
space:

  [] WARNING: CPU: 3 PID: 3685731 at arch/x86/mm/fault.c:435 vmalloc_fault+0x289/0x290
  [] CPU: 3 PID: 3685731 Comm: sh Tainted: G        W       4.6.0-5_fbk1_223_gdbf0f40 #1
  [] Call Trace:
  []  <NMI>  [<ffffffff814717d1>] dump_stack+0x4d/0x6c
  []  [<ffffffff81076e43>] __warn+0xd3/0xf0
  []  [<ffffffff81076f2d>] warn_slowpath_null+0x1d/0x20
  []  [<ffffffff8104a899>] vmalloc_fault+0x289/0x290
  []  [<ffffffff8104b5a0>] __do_page_fault+0x330/0x490
  []  [<ffffffff8104b70c>] do_page_fault+0xc/0x10
  []  [<ffffffff81794e82>] page_fault+0x22/0x30
  []  [<ffffffff81006280>] ? perf_callchain_user+0x100/0x2a0
  []  [<ffffffff8115124f>] get_perf_callchain+0x17f/0x190
  []  [<ffffffff811512c7>] perf_callchain+0x67/0x80
  []  [<ffffffff8114e750>] perf_prepare_sample+0x2a0/0x370
  []  [<ffffffff8114e840>] perf_event_output+0x20/0x60
  []  [<ffffffff8114aee7>] ? perf_event_update_userpage+0xc7/0x130
  []  [<ffffffff8114ea01>] __perf_event_overflow+0x181/0x1d0
  []  [<ffffffff8114f484>] perf_event_overflow+0x14/0x20
  []  [<ffffffff8100a6e3>] intel_pmu_handle_irq+0x1d3/0x490
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  [<ffffffff81197191>] ? vunmap_page_range+0x1a1/0x2f0
  []  [<ffffffff811972f1>] ? unmap_kernel_range_noflush+0x11/0x20
  []  [<ffffffff814f2056>] ? ghes_copy_tofrom_phys+0x116/0x1f0
  []  [<ffffffff81040d1d>] ? x2apic_send_IPI_self+0x1d/0x20
  []  [<ffffffff8100411d>] perf_event_nmi_handler+0x2d/0x50
  []  [<ffffffff8101ea31>] nmi_handle+0x61/0x110
  []  [<ffffffff8101ef94>] default_do_nmi+0x44/0x110
  []  [<ffffffff8101f13b>] do_nmi+0xdb/0x150
  []  [<ffffffff81795187>] end_repeat_nmi+0x1a/0x1e
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  <<EOE>>  <IRQ>  [<ffffffff8115d05e>] ? __probe_kernel_read+0x3e/0xa0

Fix this by moving the valid_user_frame() check to before the uaccess
that loads the return address and the pointer to the next frame.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Fixes: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/autogroup: Do not use autogroup->tg in zombie threads

Exactly because for_each_thread() in autogroup_move_group() can't see it
and update its ->sched_task_group before _put() and possibly free().

So the exiting task needs another sched_move_task() before exit_notify()
and we need to re-introduce the PF_EXITING (or similar) check removed by
the previous change for another reason.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hartsjc@redhat.com
Cc: vbendel@redhat.com
Cc: vlovejoy@redhat.com
Link: http://lkml.kernel.org/r/20161114184612.GA15968@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()

The PF_EXITING check in task_wants_autogroup() is no longer needed. Remove
it, but see the next patch.

However the comment is correct in that autogroup_move_group() must always
change task_group() for every thread so the sysctl_ check is very wrong;
we can race with cgroups and even sys_setsid() is not safe because a task
running with task_group() == ag->tg must participate in refcounting:

int main(void)
{
int sctl = open("/proc/sys/kernel/sched_autogroup_enabled", O_WRONLY);

assert(sctl > 0);
if (fork()) {
wait(NULL); // destroy the child's ag/tg
pause();
}

assert(pwrite(sctl, "1\n", 2, 0) == 2);
assert(setsid() > 0);
if (fork())
pause();

kill(getppid(), SIGKILL);
sleep(1);

// The child has gone, the grandchild runs with kref == 1
assert(pwrite(sctl, "0\n", 2, 0) == 2);
assert(setsid() > 0);

// runs with the freed ag/tg
for (;;)
sleep(1);

return 0;
}

crashes the kernel. It doesn't really need sleep(1), it doesn't matter if
autogroup_move_group() actually frees the task_group or this happens later.

Reported-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hartsjc@redhat.com
Cc: vbendel@redhat.com
Link: http://lkml.kernel.org/r/20161114184609.GA15965@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copy

The aliasing check in map_and_copy is no longer necessary because
the IPsec ESP code no longer provides an IV that points into the
actual request data. As this check is now triggering BUG checks
due to the vmalloced stack code, I'm removing it.

Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: algif_hash - Fix result clobbering in recvmsg

Recently an init call was added to hash_recvmsg so as to reset
the hash state in case a sendmsg call was never made.

Unfortunately this ended up clobbering the result if the previous
sendmsg was done with a MSG_MORE flag. This patch fixes it by
excluding that case when we make the init call.

Fixes: a8348bca2944 ("algif_hash - Fix NULL hash crash with shash")
Reported-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull apparmor bugfix from James Morris:
"This has a fix for a policy replacement bug that is fairly serious for
  apache mod_apparmor users, as it results in the wrong policy being
  applied on an network facing service"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  apparmor: fix change_hat not finding hat after policy replacement

Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:

1) With modern networking cards we can run out of 32-bit DMA space, so
    support 64-bit DMA addressing when possible on sparc64. From Dave
    Tushar.

2) Some signal frame validation checks are inverted on sparc32, fix
    from Andreas Larsson.

3) Lockdep tables can get too large in some circumstances on sparc64,
    add a way to adjust the size a bit. From Babu Moger.

4) Fix NUMA node probing on some sun4v systems, from Thomas Tai.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: drop duplicate header scatterlist.h
  lockdep: Limit static allocations if PROVE_LOCKING_SMALL is defined
  config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc
  sunbmac: Fix compiler warning
  sunqe: Fix compiler warnings
  sparc64: Enable 64-bit DMA
  sparc64: Enable sun4v dma ops to use IOMMU v2 APIs
  sparc64: Bind PCIe devices to use IOMMU v2 service
  sparc64: Initialize iommu_map_table and iommu_pool
  sparc64: Add ATU (new IOMMU) support
  sparc64: Add FORCE_MAX_ZONEORDER and default to 13
  sparc64: fix compile warning section mismatch in find_node()
  sparc32: Fix inverted invalid_frame_pointer checks on sigreturns
  sparc64: Fix find_node warning if numa node cannot be found

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Clear congestion control state when changing algorithms on an
    existing socket, from Florian Westphal.

2) Fix register bit values in altr_tse_pcs portion of stmmac driver,
    from Jia Jie Ho.

3) Fix PTP handling in stammc driver for GMAC4, from Giuseppe
    CAVALLARO.

4) Fix udplite multicast delivery handling, it ignores the udp_table
    parameter passed into the lookups, from Pablo Neira Ayuso.

5) Synchronize the space estimated by rtnl_vfinfo_size and the space
    actually used by rtnl_fill_vfinfo. From Sabrina Dubroca.

6) Fix memory leak in fib_info when splitting nodes, from Alexander
    Duyck.

7) If a driver does a napi_hash_del() explicitily and not via
    netif_napi_del(), it must perform RCU synchronization as needed. Fix
    this in virtio-net and bnxt drivers, from Eric Dumazet.

8) Likewise, it is not necessary to invoke napi_hash_del() is we are
    also doing neif_napi_del() in the same code path. Remove such calls
    from be2net and cxgb4 drivers, also from Eric Dumazet.

9) Don't allocate an ID in peernet2id_alloc() if the netns is dead,
    from WANG Cong.

10) Fix OF node and device struct leaks in of_mdio, from Johan Hovold.

11) We cannot cache routes in ip6_tunnel when using inherited traffic
    classes, from Paolo Abeni.

12) Fix several crashes and leaks in cpsw driver, from Johan Hovold.

13) Splice operations cannot use freezable blocking calls in AF_UNIX,
    from WANG Cong.

14) Link dump filtering by master device and kind support added an error
    in loop index updates during the dump if we actually do filter, fix
    from Zhang Shengju.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  tcp: zero ca_priv area when switching cc algorithms
  net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit
  ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC
  tipc: eliminate obsolete socket locking policy description
  rtnl: fix the loop index update error in rtnl_dump_ifinfo()
  l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()
  net: macb: add check for dma mapping error in start_xmit()
  rtnetlink: fix FDB size computation
  netns: fix get_net_ns_by_fd(int pid) typo
  af_unix: conditionally use freezable blocking calls in read
  net: ethernet: ti: cpsw: fix fixed-link phy probe deferral
  net: ethernet: ti: cpsw: add missing sanity check
  net: ethernet: ti: cpsw: fix secondary-emac probe error path
  net: ethernet: ti: cpsw: fix of_node and phydev leaks
  net: ethernet: ti: cpsw: fix deferred probe
  net: ethernet: ti: cpsw: fix mdio device reference leak
  net: ethernet: ti: cpsw: fix bad register access in probe error path
  net: sky2: Fix shutdown crash
  cfg80211: limit scan results cache size
  net sched filters: pass netlink message flags in event notification
  ...

tcp: zero ca_priv area when switching cc algorithms

We need to zero out the private data area when application switches
connection to different algorithm (TCP_CONGESTION setsockopt).

When congestion ops get assigned at connect time everything is already
zeroed because sk_alloc uses GFP_ZERO flag. But in the setsockopt case
this contains whatever previous cc placed there.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit

The tc could return NET_XMIT_CN as one congestion notification, but
it does not mean the packe is lost. Other modules like ipvlan,
macvlan, and others treat NET_XMIT_CN as success too.
So l2tp_eth_dev_xmit should add the NET_XMIT_CN check.

Signed-off-by: Gao Feng <gfree.wind@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFSv4.1: Keep a reference on lock states while checking

While walking the list of lock_states, keep a reference on each
nfs4_lock_state to be checked, otherwise the lock state could be removed
while the check performs TEST_STATEID and possible FREE_STATEID.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC

There's not much point, except compile test, enabling the stmmac
platform drivers unless the STM32 SoC is enabled. It's not
useful without it.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

thermal/powerclamp: add back module device table

Commit 3105f234e0aba43e44e277c20f9b32ee8add43d4 replaced module
cpu id table with a cpu feature check, which is logically correct.
But we need the module device table to allow module auto loading.

Cc: stable@vger.kernel.org # 4.8
Fixes:3105f234 thermal/powerclamp: correct cpu support check
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

perf/core: Fix address filter parser

The token table passed into match_token() must be null-terminated, which
it currently is not in the perf's address filter string parser, as caught
by Vince's perf_fuzzer and KASAN.

It doesn't blow up otherwise because of the alignment padding of the table
to the next element in the .rodata, which is luck.

Fixing by adding a null-terminator to the token table.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dvyukov@google.com
Cc: stable@vger.kernel.org # v4.7+
Fixes: 375637bc524 ("perf/core: Introduce address range filtering")
Link: http://lkml.kernel.org/r/877f81f264.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

mmc: dw_mmc: fix the error handling for dma operation

When dma->start is failed,then it has to fall back to PIO mode
for current transfer.

But Host controller was already set to bits relevant to DMA operation.
If needs to use the PIO mode, Host controller has to stop the DMA
operation. (It's more stable than now.)

When it occurred error, it's not running any request.

Fixes: 3fc7eaef44db ("mmc: dw_mmc: Add external dma interface support")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt

Rename the watchdog platform library file to explicitly show that is used only
on Intel Merrifield platforms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161118172723.179761-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well

Since the bootloader may load the compressed x86 kernel at any address,
it should always be built as PIE, not just when CONFIG_RELOCATABLE=y.

Otherwise, linker in binutils 2.27 will optimize GOT load into the
absolute address when building the compressed x86 kernel as a non-PIE
executable.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
[ Small wording changes. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/platform/intel-mid: Register watchdog device after SCU

Watchdog device in Intel Tangier relies on SCU to be present. It uses the SCU
IPC channel to send commands and receive responses. If watchdog driver is
initialized quite before SCU and a command has been sent the result is always
an error like the following:

intel_mid_wdt: Error stopping watchdog: 0xffffffed

Register watchdog device whne SCU is ready to avoid described issue.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161118165224.175514-1-andriy.shevchenko@linux.intel.com
[ Small cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/fpu: Fix invalid FPU ptrace state after execve()

Robert O'Callahan reported that after an execve PTRACE_GETREGSET
NT_X86_XSTATE continues to return the pre-exec register values
until the exec'ed task modifies FPU state.

The test code is at:

https://bugzilla.redhat.com/attachment.cgi?id=1164286.

What is happening is fpu__clear() does not properly clear fpstate.
Fix it by doing just that.

Reported-by: Robert O'Callahan <robert@ocallahan.org>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1479402695-6553-1-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/boot: Fail the boot if !M486 and CPUID is missing

Linux will have all kinds of sporadic problems on systems that don't
have the CPUID instruction unless CONFIG_M486=y.  In particular,
sync_core() will explode.

I believe that these kernels had a better chance of working before
commit 05fb3c199bb0 ("x86/boot: Initialize FPU and X86_FEATURE_ALWAYS
even if we don't have CPUID").  That commit inadvertently fixed a
serious bug: we used to fail to detect the FPU if CPUID wasn't
present.  Because we also used to forget to set X86_FEATURE_ALWAYS, we
end up with no cpu feature bits set at all.  This meant that
alternative patching didn't do anything and, if paravirt was disabled,
we could plausibly finish the entire boot process without calling
sync_core().

Rather than trying to work around these issues, just have the kernel
fail loudly if it's running on a CPUID-less 486, doesn't have CPUID,
and doesn't have CONFIG_M486 set.

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/70eac6639f23df8be5fe03fa1984aedd5d40077a.1479598603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/traps: Ignore high word of regs->cs in early_fixup_exception()

On the 80486 DX, it seems that some exceptions may leave garbage in
the high bits of CS.  This causes sporadic failures in which
early_fixup_exception() refuses to fix up an exception.

As far as I can tell, this has been buggy for a long time, but the
problem seems to have been exacerbated by commits:

  1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
  e1bfc11c5a6f ("x86/init: Fix cr4_init_shadow() on CR4-less machines")

This appears to have broken for as long as we've had early
exception handling.

[ Note to stable maintainers: This patch is needed all the way back to 3.4,
  but it will only apply to 4.6 and up, as it depends on commit:

    0e861fbb5bda ("x86/head: Move early exception panic code into early_fixup_exception()")

  If you want to backport to kernels before 4.6, please don't backport the
  prerequisites (there was a big chain of them that rewrote a lot of the
  early exception machinery); instead, ask me and I can send you a one-liner
  that will apply. ]

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 4c5023a3fa2e ("x86-32: Handle exception table entries during early boot")
Link: http://lkml.kernel.org/r/cb32c69920e58a1a58e7b5cad975038a69c0ce7d.1479609510.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

apparmor: fix change_hat not finding hat after policy replacement

After a policy replacement, the task cred may be out of date and need
to be updated. However change_hat is using the stale profiles from
the out of date cred resulting in either: a stale profile being applied
or, incorrect failure when searching for a hat profile as it has been
migrated to the new parent profile.

Fixes: 01e2b670aa898a39259bc85c78e3d74820f4d3b6 (failure to find hat)
Fixes: 898127c34ec03291c86f4ff3856d79e9e18952bc (stale policy being applied)
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000287
Cc: stable@vger.kernel.org
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Linux 4.9-rc6

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"A few more ARM fixes:

   - the assembly backtrace code suffers problems with the new printk()
     implementation which assumes that kernel messages without KERN_CONT
     should have newlines inserted between them. Fix this.
   - fix a section naming error - ".init.text" rather than ".text.init"
   - preallocate DMA debug memory at core_initcall() time rather than
     fs_initcall(), as we have some core drivers that need to use DMA
     mapping - and that triggers a kernel warning from the DMA debug
     code.
   - fix XIP kernels after the ro_after_init changes made this data
     permanently read-only"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: Fix XIP kernels
  ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
  ARM: 8624/1: proc-v7m.S: fix init section name
  ARM: fix backtrace

tipc: eliminate obsolete socket locking policy description

The comment block in socket.c describing the locking policy is
obsolete, and does not reflect current reality. We remove it in this
commit.

Since the current locking policy is much simpler and follows a
mainstream approach, we see no need to add a new description.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl: fix the loop index update error in rtnl_dump_ifinfo()

If the link is filtered out, loop index should also be updated. If not,
loop index will not be correct.

Fixes: dc599f76c22b0 ("net: Add support for filtering link dump by master device and kind")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()

Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind().
Without lock, a concurrent call could modify the socket flags between
the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way,
a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it
would then leave a stale pointer there, generating use-after-free
errors when walking through the list or modifying adjacent entries.

BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8
Write of size 8 by task syz-executor/10987
CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0
ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc
ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0
Call Trace:
[<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15
[<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
[<     inline     >] print_address_description mm/kasan/report.c:194
[<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283
[<     inline     >] kasan_report mm/kasan/report.c:303
[<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329
[<     inline     >] __write_once_size ./include/linux/compiler.h:249
[<     inline     >] __hlist_del ./include/linux/list.h:622
[<     inline     >] hlist_del_init ./include/linux/list.h:637
[<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239
[<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
[<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
[<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
[<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
[<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
[<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
[<ffffffff813774f9>] task_work_run+0xf9/0x170
[<ffffffff81324aae>] do_exit+0x85e/0x2a00
[<ffffffff81326dc8>] do_group_exit+0x108/0x330
[<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
[<ffffffff811b49af>] do_signal+0x7f/0x18f0
[<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
[<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
[<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448
Allocated:
PID = 10987
[ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
[ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
[ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0
[ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20
[ 1116.897025] [<     inline     >] slab_post_alloc_hook mm/slab.h:417
[ 1116.897025] [<     inline     >] slab_alloc_node mm/slub.c:2708
[ 1116.897025] [<     inline     >] slab_alloc mm/slub.c:2716
[ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721
[ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326
[ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388
[ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182
[ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153
[ 1116.897025] [<     inline     >] sock_create net/socket.c:1193
[ 1116.897025] [<     inline     >] SYSC_socket net/socket.c:1223
[ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203
[ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6
Freed:
PID = 10987
[ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
[ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
[ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0
[ 1116.897025] [<     inline     >] slab_free_hook mm/slub.c:1352
[ 1116.897025] [<     inline     >] slab_free_freelist_hook mm/slub.c:1374
[ 1116.897025] [<     inline     >] slab_free mm/slub.c:2951
[ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973
[ 1116.897025] [<     inline     >] sk_prot_free net/core/sock.c:1369
[ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444
[ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452
[ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460
[ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471
[ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589
[ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243
[ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
[ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
[ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
[ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
[ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
[ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
[ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170
[ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00
[ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330
[ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
[ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0
[ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
[ 1116.897025] [<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
[ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Memory state around the buggy address:
ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                                    ^
ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

==================================================================

The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table.

Fixes: c51ce49735c1 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"Again a set of smaller fixes across several platforms (OMAP, Marvell,
  Allwinner, i.MX, etc).

  A handful of typo fixes and smaller missing contents from device
  trees, with some tweaks to OMAP mach files to deal with CPU feature
  print misformatting, potential NULL ptr dereference and one setup
  issue with UARTs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
  ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
  ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
  ARM: omap3: Add missing memory node in SOM-LV
  arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
  arm64: dts: marvell: fix clocksource for CP110 slave SPI0
  arm64: dts: marvell: Fix typo in label name on Armada 37xx
  ASoC: omap-abe-twl6040: fix typo in bindings documentation
  dts: omap5: board-common: enable twl6040 headset jack detection
  dts: omap5: board-common: add phandle to reference Palmas gpadc
  ARM: OMAP2+: avoid NULL pointer dereference
  ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
  ARM: dts: omap3: Fix memory node in Torpedo board
  ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
  ARM: OMAP3: Fix formatting of features printed
  ARM: dts: imx53-qsb: Fix regulator constraints
  ARM: dts: sun8i: fix the pinmux for UART1

Merge tag 'ext4_for_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"A security fix (so a maliciously corrupted file system image won't
  panic the kernel) and some fixes for CONFIG_VMAP_STACK"

* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: sanity check the block and cluster size at mount time
  fscrypto: don't use on-stack buffer for key derivation
  fscrypto: don't use on-stack buffer for filename encryption

ext4: sanity check the block and cluster size at mount time

If the block size or cluster size is insane, reject the mount. This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

fscrypto: don't use on-stack buffer for key derivation

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page. get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fscrypto: don't use on-stack buffer for filename encryption

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page. For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename. Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Some I2C driver bugfixes (and one documentation fix)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
  i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare
  i2c: mux: fix up dependencies
  i2c: Documentation: i2c-topology: fix minor whitespace nit
  i2c: mux: demux-pinctrl: make drivers with no pinctrl work again

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"ARM:
   - Fix handling of the 32bit cycle counter
   - Fix cycle counter filtering

  x86:
   - Fix a race leading to double unregistering of user notifiers
   - Amend oversight in kvm_arch_set_irq that turned Hyper-V code dead
   - Use SRCU around kvm_lapic_set_vapic_addr
   - Avoid recursive flushing of asynchronous page faults
   - Do not rely on deferred update in KVM_GET_CLOCK, which fixes #GP
   - Let userspace know that KVM_GET_CLOCK is useful with master clock;
     4.9 changed the return value to better match the guest clock, but
     didn't provide means to let guests take advantage of it"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic
  KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
  KVM: async_pf: avoid recursive flushing of work items
  kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use
  KVM: Disable irq while unregistering user notifier
  KVM: x86: do not go through vcpu in __get_kvmclock_ns
  KVM: arm64: Fix the issues when guest PMCCFILTR is configured
  arm64: KVM: pmu: Fix AArch32 cycle counter access

i2c: i2c-mux-pca954x: fix deselect enabling for device-tree

Deselect functionality can be ignored for device-trees with
"i2c-mux-idle-disconnect" entries if no platform_data is available.
By enabling the deselect functionality outside the platform_data
block the logic works as it did in previous kernels.

Fixes: 7fcac9807175 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Alex Hemme <ahemme@cisco.com>
Signed-off-by: Ziyang Wu <ziywu@cisco.com>
[touched up a few minor issues /peda]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Merge tag 'powerpc-4.9-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
   - fix system reset interrupt winkle wakeups
   - fix setting of AIL in hypervisor mode

  Fixes for code merged this cycle:
   - fix exception vector build with 2.23 era binutils
   - fix missing update of HID register on secondary CPUs

  Other:
   - fix missing pr_cont()s
   - invalidate ERAT on tlbiel for POWER9 DD1"

* tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix missing update of HID register on secondary CPUs
  powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
  powerpc/64: Fix setting of AIL in hypervisor mode
  powerpc/oops: Fix missing pr_cont()s in instruction dump
  powerpc/oops: Fix missing pr_cont()s in show_regs()
  powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al.
  powerpc/oops: Fix missing pr_cont()s in show_stack()
  powerpc: Fix exception vector build with 2.23 era binutils
  powerpc/64s: Fix system reset interrupt winkle wakeups

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes the following issues:

   - Compiler warning in caam driver that was the last one remaining

   - Do not register aes-xts in caam drivers on unsupported platforms

   - Regression in algif_hash interface that may lead to an oops"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Fix NULL hash crash with shash
  crypto: caam - fix type mismatch warning
  crypto: caam - do not register AES-XTS mode on LP units

Merge tag 'leds_4.9-rc6' of git://git./linux/kernel/git/j.anaszewski/linux-leds

Pull LED subsystem update from Jacek Anaszewski:
"I'd like to announce a new co-maintainer - Pavel Machek"

* tag 'leds_4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: Add LED subsystem co-maintainer

Merge tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
"Some driver fixes which we pending in my tree:

   - return error code fix in edma driver
   - Kconfig fix for genric allocator in mmp_tdma
   - fix uninitialized value in sun6i
   - Runtime pm fixes for cppi"

* tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: cppi41: More PM runtime fixes
  dmaengine: cpp41: Fix handling of error path
  dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected
  dmaengine: cppi41: Fix list not empty warning on module removal
  dmaengine: sun6i: fix the uninitialized value for v_lli
  dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig
  dmaengine: edma: Fix error return code in edma_alloc_chan_resources()

kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic

kvm_arch_set_irq is unused since commit b97e6de9c96. Merge
its functionality with kvm_arch_set_irq_inatomic.

Reported-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr

Reported by syzkaller:

    [ INFO: suspicious RCU usage. ]
    4.9.0-rc4+ #47 Not tainted
    -------------------------------
    ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!

    stack backtrace:
    CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
     ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000
     0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9
     ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000
    Call Trace:
     [<     inline     >] __dump_stack lib/dump_stack.c:15
     [<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51
     [<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445
     [<     inline     >] __kvm_memslots include/linux/kvm_host.h:534
     [<     inline     >] kvm_memslots include/linux/kvm_host.h:541
     [<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941
     [<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: fda4e2e85589191b123d31cdc21fd33ee70f50fd
Cc: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: async_pf: avoid recursive flushing of work items

This was reported by syzkaller:

    [ INFO: possible recursive locking detected ]
    4.9.0-rc4+ #49 Not tainted
    ---------------------------------------------
    kworker/2:1/5658 is trying to acquire lock:
     ([ 1644.769018] (&work->work)
    [<     inline     >] list_empty include/linux/compiler.h:243
    [<ffffffff8128dd60>] flush_work+0x0/0x660 kernel/workqueue.c:1511

    but task is already holding lock:
     ([ 1644.769018] (&work->work)
    [<ffffffff812916ab>] process_one_work+0x94b/0x1900 kernel/workqueue.c:2093

    stack backtrace:
    CPU: 2 PID: 5658 Comm: kworker/2:1 Not tainted 4.9.0-rc4+ #49
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: events async_pf_execute
     ffff8800676ff630 ffffffff81c2e46b ffffffff8485b930 ffff88006b1fc480
     0000000000000000 ffffffff8485b930 ffff8800676ff7e0 ffffffff81339b27
     ffff8800676ff7e8 0000000000000046 ffff88006b1fcce8 ffff88006b1fccf0
    Call Trace:
    ...
    [<ffffffff8128ddf3>] flush_work+0x93/0x660 kernel/workqueue.c:2846
    [<ffffffff812954ea>] __cancel_work_timer+0x17a/0x410 kernel/workqueue.c:2916
    [<ffffffff81295797>] cancel_work_sync+0x17/0x20 kernel/workqueue.c:2951
    [<ffffffff81073037>] kvm_clear_async_pf_completion_queue+0xd7/0x400 virt/kvm/async_pf.c:126
    [<     inline     >] kvm_free_vcpus arch/x86/kvm/x86.c:7841
    [<ffffffff810b728d>] kvm_arch_destroy_vm+0x23d/0x620 arch/x86/kvm/x86.c:7946
    [<     inline     >] kvm_destroy_vm virt/kvm/kvm_main.c:731
    [<ffffffff8105914e>] kvm_put_kvm+0x40e/0x790 virt/kvm/kvm_main.c:752
    [<ffffffff81072b3d>] async_pf_execute+0x23d/0x4f0 virt/kvm/async_pf.c:111
    [<ffffffff8129175c>] process_one_work+0x9fc/0x1900 kernel/workqueue.c:2096
    [<ffffffff8129274f>] worker_thread+0xef/0x1480 kernel/workqueue.c:2230
    [<ffffffff812a5a94>] kthread+0x244/0x2d0 kernel/kthread.c:209
    [<ffffffff831f102a>] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433

The reason is that kvm_put_kvm is causing the destruction of the VM, but
the page fault is still on the ->queue list.  The ->queue list is owned
by the VCPU, not by the work items, so we cannot just add list_del to
the work item.

Instead, use work->vcpu to note async page faults that have been resolved
and will be processed through the done list.  There is no need to flush
those.

Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use

Userspace can read the exact value of kvmclock by reading the TSC
and fetching the timekeeping parameters out of guest memory. This
however is brittle and not necessary anymore with KVM 4.11. Provide
a mechanism that lets userspace know if the new KVM_GET_CLOCK
semantics are in effect, and---since we are at it---if the clock
is stable across all VCPUs.

Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: Disable irq while unregistering user notifier

Function user_notifier_unregister should be called only once for each
registered user notifier.

Function kvm_arch_hardware_disable can be executed from an IPI context
which could cause a race condition with a VCPU returning to user mode
and attempting to unregister the notifier.

Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Cc: stable@vger.kernel.org
Fixes: 18863bdd60f8 ("KVM: x86 shared msr infrastructure")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: do not go through vcpu in __get_kvmclock_ns

Going through the first VCPU is wrong if you follow a KVM_SET_CLOCK with
a KVM_GET_CLOCK immediately after, without letting the VCPU run and
call kvm_guest_time_update.

To fix this, compute the kvmclock value ourselves, using the master
clock (tsc, nsec) pair as the base and the host CPU frequency as
the scale.

Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Merge tag 'kvm-arm-for-4.9-rc6' of git://git./linux/kernel/git/kvmarm/kvmarm

KVM/ARM updates for v4.9-rc6

- Fix handling of the 32bit cycle counter
- Fix cycle counter filtering

Merge tag 'batadv-net-for-davem-20161119' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are two batman-adv bugfix patches:

- Revert a splat on disabling interface which created another problem,
by Sven Eckelmann

- Fix error handling when the primary interface disappears during a
throughput meter test, by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: drop duplicate header scatterlist.h

Drop duplicate header scatterlist.h from iommu_common.h.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: add check for dma mapping error in start_xmit()

at91ether_start_xmit() does not check for dma mapping errors.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'acpi-4.9-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"They fix an ACPI thermal management regression introduced by a recent
  FADT handling cleanup, an ACPI tools build issue introduced by a
  recent ACPICA commit and a PCC mailbox initialization bug causing
  lockdep to complain loudly.

  Specifics:

   - Revert a recent ACPICA cleanup that attempted to get rid of all
     FADT version 2 legacy, but broke ACPI thermal management on at
     least one system (Rafael Wysocki).

   - Fix cross-compiled builds of ACPI tools that stopped working after
     a recent cleanup related to the handling of header files in ACPICA
     (Lv Zheng).

   - Fix a locking issue in the PCC channel initialization code that
     invokes devm_request_irq() under a spinlock (among other things)
     and causes lockdep to complain (Hoan Tran)"

* tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power/acpi: Remove direct kernel source include reference
  mailbox: PCC: Fix lockdep warning when request PCC channel
  Revert "ACPICA: FADT support cleanup"

Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fixes from Michal Marek:
"Here are some regression fixes for kbuild:

   - modversion support for exported asm symbols (Nick Piggin). The
     affected architectures need separate patches adding
     asm-prototypes.h.

   - fix rebuilds of lib-ksyms.o (Nick Piggin)

   - -fno-PIE builds (Sebastian Siewior and Borislav Petkov). This is
     not a kernel regression, but one of the Debian gcc package.
     Nevertheless, it's quite annoying, so I think it should go into
     mainline and stable now"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Steal gcc's pie from the very beginning
  kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL
  x86/kexec: add -fno-PIE
  scripts/has-stack-protector: add -fno-PIE
  kbuild: add -fno-PIE
  kbuild: modversions for EXPORT_SYMBOL() for asm
  kbuild: prevent lib-ksyms.o rebuilds

Merge tag 'nfsd-4.9-2' of git://linux-nfs.org/~bfields/linux

Pull nfsd bugfix from Bruce Fields:
"Just one fix for an NFS/RDMA crash"

* tag 'nfsd-4.9-2' of git://linux-nfs.org/~bfields/linux:
sunrpc: svc_age_temp_xprts_now should not call setsockopt non-tcp transports

MAINTAINERS: Add LED subsystem co-maintainer

Mark me as a co-maintainer of LED subsystem.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Merge branches 'acpica-fixes', 'acpi-cppc-fixes' and 'acpi-tools-fixes'

* acpica-fixes:
  Revert "ACPICA: FADT support cleanup"

* acpi-cppc-fixes:
  mailbox: PCC: Fix lockdep warning when request PCC channel

* acpi-tools-fixes:
  tools/power/acpi: Remove direct kernel source include reference

Merge branch 'sparc-lockdep-small'

Babu Moger says:

====================
Adjust lockdep static allocations for sparc

These patches limit the static allocations for lockdep data structures
used for debugging locking correctness. For sparc, all the kernel's code,
data, and bss, must have locked translations in the TLB so that we don't
get TLB misses on kernel code and data. Current sparc chips have 8 TLB
entries available that may be locked down, and with a 4mb page size,
this gives a maximum of 32MB. With PROVE_LOCKING we could go over this
limit and cause system boot-up problems. These patches limit the static
allocations so that everything fits in current required size limit.

patch 1 : Adds new config parameter CONFIG_PROVE_LOCKING_SMALL
Patch 2 : Adjusts the sizes based on the new config parameter

v2-> v3:
   Some more comments from Sam Ravnborg and Peter Zijlstra.
   Defined PROVE_LOCKING_SMALL as invisible and moved the selection to
   arch/sparc/Kconfig.

v1-> v2:
   As suggested by Peter Zijlstra, keeping the default as is.
   Introduced new config variable CONFIG_PROVE_LOCKING_SMALL
   to handle sparc specific case.

v0:
   Initial revision.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

lockdep: Limit static allocations if PROVE_LOCKING_SMALL is defined

Reduce the size of data structure for lockdep entries by half if
PROVE_LOCKING_SMALL if defined. This is used only for sparc.

Signed-off-by: Babu Moger <babu.moger@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc

This new config parameter limits the space used for "Lock debugging:
prove locking correctness" by about 4MB. The current sparc systems have
the limitation of 32MB size for kernel size including .text, .data and
.bss sections. With PROVE_LOCKING feature, the kernel size could grow
beyond this limit and causing system boot-up issues. With this option,
kernel limits the size of the entries of lock_chains, stack_trace etc.,
so that kernel fits in required size limit. This is not visible to user
and only used for sparc.

Signed-off-by: Babu Moger <babu.moger@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state

Now that we're doing TEST_STATEID in nfs4_reclaim_open_state(), we can have
a NFS4ERR_OLD_STATEID returned from nfs41_open_expired() . Instead of
marking state recovery as failed, mark the state for recovery again.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

sunbmac: Fix compiler warning

sunbmac uses '__u32' for dma handle while invoking kernel DMA APIs,
instead of using dma_addr_t. This hasn't caused any 'incompatible
pointer type' warning on SPARC because until now dma_addr_t is of
type u32. However, recent changes in SPARC ATU (iommu) enables 64bit
DMA and therefore dma_addr_t becomes of type u64. This makes
'incompatible pointer type' warnings inevitable.

e.g.
drivers/net/ethernet/sun/sunbmac.c: In function ‘bigmac_ether_init’:
drivers/net/ethernet/sun/sunbmac.c:1166: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’

This patch resolves above compiler warning.

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: chris hyser <chris.hyser@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sunqe: Fix compiler warnings

sunqe uses '__u32' for dma handle while invoking kernel DMA APIs,
instead of using dma_addr_t. This hasn't caused any 'incompatible
pointer type' warning on SPARC because until now dma_addr_t is of
type u32. However, recent changes in SPARC ATU (iommu) enables 64bit
DMA and therefore dma_addr_t becomes of type u64. This makes
'incompatible pointer type' warnings inevitable.

e.g.
drivers/net/ethernet/sun/sunqe.c: In function ‘qec_ether_init’:
drivers/net/ethernet/sun/sunqe.c:883: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’
drivers/net/ethernet/sun/sunqe.c:885: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’

This patch resolves above compiler warnings.

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: chris hyser <chris.hyser@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFSv4: Don't call close if the open stateid has already been cleared

Ensure we test to see if the open stateid is actually set, before we
send a CLOSE.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Merge branch 'sun4v-64bit-DMA'

Tushar Dave says:

====================
sparc: Enable sun4v hypervisor PCI IOMMU v2 APIs and ATU

ATU (Address Translation Unit) is a new IOMMU in SPARC supported with
sun4v hypervisor PCI IOMMU v2 APIs.

Current SPARC IOMMU supports only 32bit address ranges and one TSB
per PCIe root complex that has a 2GB per root complex DVMA space
limit. The limit has become a scalability bottleneck nowadays that
a typical 10G/40G NIC can consume 500MB DVMA space per instance.
When DVMA resource is exhausted, devices will not be usable
since the driver can't allocate DVMA.

For example, we recently experienced legacy IOMMU limitation while
using i40e driver in system with large number of CPUs (e.g. 128).
Four ports of i40e, each request 128 QP (Queue Pairs). Each queue has
512 (default) descriptors. So considering only RX queues (because RX
premap DMA buffers), i40e takes 4*128*512 number of DMA entries in
IOMMU table. Legacy IOMMU can have at max (2G/8K)- 1 entries available
in table. So bringing up four instance of i40e alone saturate existing
IOMMU resource.

ATU removes bottleneck by allowing guest os to create IOTSB of size
32G (or more) with 64bit address ranges available in ATU HW. 32G is
more than enough DVMA space to be shared by all PCIe devices under
root complex contrast to 2G space provided by legacy IOMMU.

ATU allows PCIe devices to use 64bit DMA addressing. Devices
which choose to use 32bit DMA mask will continue to work with the
existing legacy IOMMU.

The patch set is tested on sun4v (T1000, T2000, T3, T4, T5, T7, S7)
and sun4u SPARC.

Thanks.
-Tushar

v2->v3:
- Patch #5 addresses comment by Joe Perches.
-- use %s, __func__ instead of embedding the function name.

v1->v2:
- Patch #2 addresses comments by Dave M.
-- use page allocator to allocate IOTSB.
-- use true/false with boolean variables.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Enable 64-bit DMA

ATU 64bit addressing allows PCIe devices with 64bit DMA capabilities
to use ATU for 64bit DMA.

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: chris hyser <chris.hyser@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Enable sun4v dma ops to use IOMMU v2 APIs

Add Hypervisor IOMMU v2 APIs pci_iotsb_map(), pci_iotsb_demap() and
enable sun4v dma ops to use IOMMU v2 API for all PCIe devices with
64bit DMA mask.

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: chris hyser <chris.hyser@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Bind PCIe devices to use IOMMU v2 service

In order to use Hypervisor (HV) IOMMU v2 API for map/demap, each PCIe
device has to be bound to IOTSB using HV API pci_iotsb_bind().

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: chris hyser <chris.hyser@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Initialize iommu_map_table and iommu_pool

Like legacy IOMMU, use common iommu_map_table and iommu_pool for ATU.
This change initializes iommu_map_table and iommu_pool for ATU.

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: chris hyser <chris.hyser@oracle.com>
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Add ATU (new IOMMU) support

ATU (Address Translation Unit) is a new IOMMU in SPARC supported with
Hypervisor IOMMU v2 APIs.

Current SPARC IOMMU supports only 32bit address ranges and one TSB
per PCIe root complex that has a 2GB per root complex DVMA space
limit. The limit has become a scalability bottleneck nowadays that
a typical 10G/40G NIC can consume 300MB-500MB DVMA space per
instance. When DVMA resource is exhausted, devices will not be usable
since the driver can't allocate DVMA.

ATU removes bottleneck by allowing guest os to create IOTSB of size
32G (or more) with 64bit address ranges available in ATU HW. 32G is
more than enough DVMA space to be shared by all PCIe devices under
root complex contrast to 2G space provided by legacy IOMMU.

ATU allows PCIe devices to use 64bit DMA addressing. Devices
which choose to use 32bit DMA mask will continue to work with the
existing legacy IOMMU.

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: chris hyser <chris.hyser@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Add FORCE_MAX_ZONEORDER and default to 13

This change allows ATU (new IOMMU) in SPARC systems to request
large (32M) contiguous memory during boot for creating IOTSB backing
store.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnetlink: fix FDB size computation

Add missing NDA_VLAN attribute's size.

Fixes: 1e53d5bb8878 ("net: Pass VLAN ID to rtnl_fdb_notify.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>