drm/amdgpu: validate user pitch alignment

Userspace may request pitch alignment that is not supported by GPU.
Some requests 32, but GPU ignores it and uses default 64 when cpp is
4. If GEM object is allocated based on the smaller alignment, GPU
DMA will go out of bound.

Cc: stable@vger.kernel.org # v4.2+
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: drop the unnecessary uclk hard min setting

Since soft min setting is enough. Hard min setting is redundant.

Reported-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: avoid possible buffer overflow

Make sure the clock level enforced is within the allowed
ranges.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: create pp_od_clk_voltage device file under OD support

Since pp_od_clk_voltage device file is for OD related sysfs operations.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update OD support flag for SKU with no OD capabilities

For those ASICs with no overdrive capabilities, the OD support flag
will be reset.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG

MGCG should RLC enter into safe mode first.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Cleanup 2 compiler warnings

These 2 variables are unused now, so remove their references.

Fixes: e4ae0fc drm/amdgpu: implement gfx8 post_soft_reset
Fixes: 5e01c09 drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings
test sequence

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings test sequence

The kiq ring and the very first compute ring may fail occasionally
if they are tested directly following kiq_kcq_enable.

Insert the gfx ring test before kiq ring test to delay the kiq and kcq
ring tests will fix the issue.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:Correct pfvf exchange logic

The pfvf exchange need be in exclusive mode. And add pfvf exchange in gpu
reset.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support BOOTUP_DEFAULT power profile mode

This can avoid unexpected profile mode change after running
compute workload.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virtual_dce: No need to pin the cursor bo

For virtual display feature, no need to pin cursor bo.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virtual_dce: No need to pin the fb's bo

For virtual display, no need to pin the fb's bo.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux into drm-next

Fixes for 4.21. A bit more than usual due to the holidays.  Highlights:
- add new vegaM pci id
- sr-iov fixes
- DC fix for fast cursor updates
- DC freesync fix
- DC display clock fix for polaris
- DC fixes for dongles
- DC fix for some eDP panels
- misc vega20 fixes
- kfd return code fix for dma_buf support
- VCN fixes for PCO
- nbio hw bug workaround

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181229183307.3330-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2018-12-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

GVT fixes for v4.21-rc1

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87imzfwh73.fsf@intel.com

drm/amdgpu: Add new VegaM pci id

Add a new pci id.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output

No need for pr_err here, the pr_err message in ttm_bo_evict is enough
to draw attention to something not going as planned.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add Vega20 PSP ASD firmware loading

Add PSP ASD firmware loading on Vega20. Not sure why
this was missing before.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Fix MST dp_blank REG_WAIT timeout

Need to blank stream before deallocate MST payload.

[drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu]
Call Trace:
 dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu]
 core_link_disable_stream+0x40/0x230 [amdgpu]
 ? generic_reg_update_ex+0xdb/0x130 [amdgpu]
 dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu]
 dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu]
 ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu]
 dc_commit_state+0x2ba/0x4d0 [amdgpu]
 amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu]
 ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu]
 ? wait_for_completion_timeout+0x1f/0x120
 ? wait_for_completion_interruptible+0x1c/0x160
 commit_tail+0x3d/0x60 [drm_kms_helper]
 drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper]
 drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm]
 drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm]
 drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
 drm_ioctl+0x1e0/0x430 [drm]
 ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm]
 ? ep_read_events_proc+0xb0/0xb0
 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0
 ? timerqueue_add+0x52/0x80
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0x90/0x5f0
 SyS_ioctl+0x74/0x80
 do_syscall_64+0x74/0x140
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
---[ end trace 3ed7b77a97d60f72 ]---

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: validate extended dongle caps

[why]
Some dongle doesn't have a valid extended dongle caps,
but we still set the extended dongle caps to be valid.
This causes validation fails for all timing.

[how]
If no dp_hdmi_max_pixel_clk is provided,
don't use extended dongle caps.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use div_u64 for flip timestamp ns to ms

Resolves __udivdi3 missing errors when building for i386.

Fixes: 6378ef012ddc ("drm/amd/display: Add below the range support for FreeSync")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/uvd:Change uvd ring name convention

Since umr tool can't handle bracket, change uvd ring name convention.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Vega20 LCLK DPM level setting support

Support manual LCLK DPM level switch on Vega20.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print process info when job timeout

When a job is timeout, try to print the related process information
for debugging

Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nbio7.4: add hw bug workaround for vega20

Configure PCIE_CI_CNTL to work around a hw bug that affects
some multi-GPU compute workloads.

Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12

Configure PCIE_CI_CNTL to work around a hw bug that affects
some multi-GPU compute workloads.

Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Optimize passive update planes.

[Why]
passive update planes still spends a litte more
time on some cases.

[How]
Remove unnecessary trace which involving in some register read.
Disable debug output for release build.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: verify lane status before exiting verify link cap

[why]
DP LL CTS1.4 4.3.2.1 test failure.

[how]
The failure is caused by not handling DP link loss
hpd short pusle during set mode. The change is to read link status
before set mode link training. If link is lost, re-verify link caps.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix bug with not updating VSP infoframe

[WHY]
Currently, when the VSP infopacket is rebuilt in DM, it is not updated
when being programmed in encoder.

[HOW]
Add new VSP case for update_info_frame

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add retry to read ddc_clock pin

[WHY]
On customer board, there is one pluse (1v , < 1ms) on
DDC_CLK pin when plug / unplug DP cable. Driver will read
it and config DP to HDMI/DVI dongle.

[HOW]
If there is a real dongle, DDC_CLK should be always pull high.
Try to read again to recovery this special case. Retry times = 3.
Need additional 3ms to detect DP passive dongle(3 failures)

Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't skip link training for empty dongle

[Why]
Skipping initial link training will result in no verified link cap for
mode enumeration. Some versions of the BIOS seem to have PHY programming
sequence issue as well if initial link training is skipped, resulting in
a softlock in BIOS command table.

[How]
Identify the empty dongle hotplug case, and still do initial link
training.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wait edp HPD to high in detect_sink

[Why]
In 99% user case, edp will be post by vbios.
In 1% / current case: Lenovo don't light up edp panel in vbios
post stage, vbios won't be lit up. Thus in dal when we init DCN
10 hw, we power up edp, then we start detect_sink, but internal
time is too short, when we detect it, HPD is still low, so we don't
detect the edp, and edp shows black.

[How]
When we init hw, we wait edp HPD to high after power up edp.

Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix surface update sequence

An earlier change added update of interdependent dlg/ttu params for pipes
not being updated in the current call. The code fails to check if the other
pipes are actually active yet causing an assert.

This change adds a check for surface presence on the pipes before updating
the interdepenednt params.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix YCbCr420 blank color

[Why]
YCbCr420 packing format uses two chanels for luma, and 1
channel for both chroma component. Our previous implementation
did not account for this and results in every other pixel having
very high luma value, showing greyish color instead of black.

YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> .....
YCbCr420 = <Y1, Y2,  Cb1>; <Y3, Y4,  Cr1> .....

[How]
Program the second channel with the black color value for luma
as well.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Warn instead of error on REG_WAIT timeout

[Why]
DC warns when a REG_WAIT takes a while and full-on errors
with stack dump on REG_WAIT timeout.  Most of the time it isn't
a real issue.

[How]
Make DC cool its jets - taking a while is a debug message (because
it is not something that normal users should need to be aware of),
and timeouts are warnings (because it technically shouldn't
happen, but it's not a big deal if it does)

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move AYCrCb8888 format to video section

This is a dual channel format and should be treated like other
video formats

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't log error if we have no connectors

[Why]
In certain configurations, such as PX configs or some Vega20 parts
DC gets created without connectors.

[How]
Drop the dm_error print when no connectors.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add functionality to get XGMI SS info

[Why]
When XGMI is enabled, the DP reference clock needs to be adjusted
according to the XGMI spread spectrum percentage and mode. But first,
we need the ability to fetch this info.

[How]
Within the BIOS parser, Read from vBIOS when XGMI SS info is requested.

In addition, diags build uses include_legacy/atomfirmware.h for the
smu_info_v3_3 table headers. Update that as well.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCE_VERSION_12_1 enum for Vega 20

[Why]
We'll need a way to differentiate Vega 20 in DC

[How]
Add a DCE_VERSION_12_1 enum, which will be returned as the DC version if
the ASIC used is a Vega 20.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add below the range support for FreeSync

[Why]
When the flip-rate is below the minimum supported variable refresh rate
range for the monitor the front porch wait will timeout and be
frequently misaligned resulting in stuttering and/or flickering.

The FreeSync module can still maintain a smooth and flicker free
image when the monitor has a refresh rate range such that the maximum
refresh > 2 * minimum refresh by utilizing low framerate compensation,
"below the range".

[How]
Hook up the pre-flip and post-flip handlers from the FreeSync module.
These adjust the minimum/maximum vrr range to duplicate frames
when appropriate by tracking flip timestamps.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Raise dispclk value for Polaris

[Why]
The visual corruption due to low display clock value observed on some
systems

[How]
There was earlier patch for dspclk:
'drm/amd/display: Raise dispclk value for dce_update_clocks'
Adding +15% workaround also to to dce112_update_clocks

Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Leo Li <Sunpeng.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Skip fast cursor updates for fb changes

[Why]
The behavior of drm_atomic_helper_cleanup_planes differs depending on
whether the commit was asynchronous or not. When it's called from
amdgpu_dm_atomic_commit_tail during a typical atomic commit the
plane state has been swapped so it calls cleanup_fb on the old plane
state.

However, in the asynchronous commit codepath the call to
drm_atomic_helper_commit also calls dm_plane_helper_cleanup_fb after
atomic_async_update has been called. Since the plane state is updated
in place and has not been swapped the cleanup_fb call affects the new
plane state.

This results in a use after free for the given sequence:

- Fast update, fb1 pin/ref, fb1 unpin/unref
- Fast update, fb2 pin/ref, fb2 unpin/unref
- Slow update, fb1 pin/ref, fb2 unpin/unref
- Fast update, fb2 pin/ref -> use after free. bug

[How]
Disallow framebuffer changes in the fast path. Since this includes
a NULL framebuffer, this means that only framebuffers that have
been previously pin+ref at least once will be used, preventing a
use after free.

This has a significant throughput reduction for cursor updates where
the framebuffer changes. For most desktop usage this isn't a problem,
but it does introduce performance regressions for two specific IGT
tests:

- cursor-vs-flip-toggle
- cursor-vs-flip-varying-size

Fixes: 2cc751931afc ("drm/amd/display: Add fast path for cursor plane updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct the return value for error case

It should not return 0 for error case as '0' is actually
a special value for index.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix handling of return code of dma_buf_get

On errors, dma_buf_get returns a negative error code, rather than NULL.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Improves robustness of SOC15_WAIT_ON_RREG

If register value is updating, reset timeout counter.
It improves robustness of SOC15_WAIT_ON_RREG.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Remove bit 31 for scratch2 to indicate the WA is active

Remove bit 31 for scratch2 to indicate the Hardware bug work around is active.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Scan enc/jpeg fences to init dpg pause new state

Scan enc/jpeg fences to init dpg pause new state in begin use.
It will help set dpg mode to desire state actively.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Always check all vcn ring status during dpg mode stop

Always check all vcn ring status during dpg mode stop, it will help
identify which vcn ring may cause the issue.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Update ring point to JPEG before init JPEG wptr

It is a bug fix.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Always gate vcn block during hw finishing

Under Dynamic Power Gate mode, UVD_STATUS needn't be checked.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Update vcn.cur_state during suspend

Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend,
to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

Lucas writes:

"nothing major this time, mostly some cleanups that were found on the
way of reworking the code in preparation for new feature additions."

Small conflict in drivers/gpu/drm/etnaviv/etnaviv_drv.c because
drm-misc-next also has a patch to switch over to _put() functions.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1545130845.5874.23.camel@pengutronix.de

drm/etnaviv: remove lastctx member from gpu struct

It only written and we don't infer any useful information from
it anymore. Remove it.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: replace header include with forward declaration

The etnaviv_gpu header only needs to know about the pointer types, so
replace by a forward declaration and only include the headers where needed.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: remove unnecessary local irq disable

The only event function that is called from IRQ context is event_free,
which is already using atomic bitmap operations, so we can avoid taking
the event spinlock in this function completely. As other the other
functions still using the event spinlock are all called from normal
process context, we can avoid disabling IRQs while holding the spinlock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/amdgpu: WARN once if amdgpu_bo_unpin is called for an unpinned BO

It indicates a pin/unpin imbalance bug somewhere. While the bug isn't
necessarily in the call chain hitting this, it's at least one part
involved.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable Vega20 page queue support

Page queue is supported on Vega20 with SDMA firmware
123 onwards.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use different irq ring ID for Vega20 page queues

Vega20 uses ring id 1 for page queues EOP irq while previous
ASICs take ring id 3.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update the vm invalidation engine layout V2

We need new invalidation engine layout due to new SDMA page
queues added.

V2: fix coding style and add correct return value

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: increase the MAX ring number

As two more SDMA page queue rings are added on Vega20.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix NULL fence handling in amdgpu_cs_fence_to_handle_ioctl

When the fence is already signaled it is perfectly normal to get a NULL
fence here. But since we can't export that we need to use a stub fence.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: Correct and refine the vmr support. (v2)

Currently driver only psp v11 support vmr.

v2: squash in unused variable removal (Alex)

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp_v3_1: Get psp fw version through reading register

If PSP FW is running already, driver will not load PSP FW again and skip
it. So psp fw version is not correct if reading it from FW binary file,
need to get right version from register.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: access register without KIQ

There is no need to access register such as mmSMC_IND_INDEX_11
and mmSMC_IND_DATA_11, PCIE_INDEX, PCIE_DATA through KIQ because
they are VF-copy.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: kfd_pre_reset outside req_full_gpu cause sriov hang

XGMI hive put kfd_pre_reset into amdgpu_device_lock_adev,
but outside req_full_gpu of sriov.
It would make sriov hang during reset.

Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'exynos-drm-next-for-v4.21-v2' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Add configurable plane alpha and pixel blend mode support
- This patch series adds configurable plane alpha and pixel blend mode
  support for FIMD device driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1544772430-8295-1-git-send-email-inki.dae@samsung.com

drm/exynos: fimd: Make pixel blend mode configurable

The fimd hardware supports different blend modes. Add pixel blend mode
property and make it configurable, by modifying the blend equation.

Tested on TRATS2 with Exynos 4412 CPU, on top of linux-next-20181019.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Make plane alpha configurable

The fimd hardware supports variable plane alpha. Currently planes
are opaque, make this configurable.

Tested on TRATS2 with Exynos 4412 CPU, on top of linux-next-20181019.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'vmwgfx-next-2018-12-13' of git://people.freedesktop.org/~thomash/linux into drm-next

Pull request of 2018-12-13

Two minor fixes for next pull.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213130848.3080-1-thellstrom@vmware.com

Merge tag 'drm-msm-next-2018-12-12' of git://people.freedesktop.org/~robclark/linux into drm-next

This time around, seeing some love for some older hw:

 - a2xx gpu support for apq8060 (hp touchpad) and imx5 (headless
   gpu-only mode)
 - a2xx gpummu support (a2xx was pre-iommu)
 - mdp4 display support for apq8060/touchpad

For display/dpu:

 - a big pile of continuing dpu fixes and cleanups

On the gpu side of things:

 - per-submit statistics and traceevents for better profiling
 - a6xx crashdump support
 - decouple get_iova() and page pinning.. so we can unpin from
   physical memory inactive bo's while using softpin to lower
   cpu overhead
 - new interface to set debug names on GEM BOs and debugfs
   output improvements
 - additional submit flag to indicate buffers that are used
   to dump (so $debugfs/rd cmdstream dumping is useful with
   softpin + state-objects)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvVvLPD9_Z4kyfGe98Y--byj6HbxHivEYSgF7Rq7=bFnw@mail.gmail.com

Merge branch 'linux-4.21' of git://github.com/skeggsb/linux into drm-next

Mostly just initial support for Turing TU104/TU106 chipsets.  Support
for TU102 is missing as I don't yet have HW, but it should be trivial
to add in later in the merge window (in theory).

It's a bit of a rough first pass that'll get improved in future
releases as a finish figuring out some of the other HW changes, but
it's good enough as it stands for modesetting and suspend/resume etc.

Acceleration bring-up is incomplete due to NVIDIA not yet having
provided FW images for me to use, though command submission and copy
engines are functional already.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7KmfcQqZcx+wh_1UKjTovp4PH_5UVMfeyxUu-M9WLZfw@mail.gmail.com

Merge tag 'drm/tegra/for-4.21-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v4.21-rc1

These changes contain a couple of minor fixes for host1x and the Falcon
library in Tegra DRM. There are also a couple of missing pieces that
finally enable support for host1x, VIC and display on Tegra194. I've
also added a patch that enables audio over HDMI using the SOR which has
been tested, and works, on both Tegra186 and Tegra194.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207134712.32683-1-thierry.reding@gmail.com

Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux into drm-next

[airlied: make etnaviv build again]

amdgpu:
- DC trace support
- More DC documentation
- XGMI hive reset support
- Rework IH interaction with KFD
- Misc fixes and cleanups
- Powerplay updates for newer polaris variants
- Add cursor plane update fast path
- Enable gpu reset by default on CI parts
- Fix config with KFD/HSA not enabled

amdkfd:
- Limit vram overcommit
- dmabuf support
- Support for doorbell BOs

ttm:
- Support for simultaneous submissions to multiple engines

scheduler:
- Add helpers for hw with preemption support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207233119.16861-1-alexander.deucher@amd.com

drm/amd/display: Add fast path for cursor plane updates

[Why]
Legacy cursor plane updates from drm helpers go through the full
atomic codepath. A high volume of cursor updates through this slow
code path can cause subsequent page-flips to skip vblank intervals
since each individual update is slow.

This problem is particularly noticeable for the compton compositor.

[How]
A fast path for cursor plane updates is added by using DRM asynchronous
commit support provided by async_check and async_update. These don't do
a full state/flip_done dependency stall and they don't block other
commit work.

However, DC still expects itself to be single-threaded for anything
that can issue register writes. Screen corruption or hangs can occur
if write sequences overlap. Every call that potentially perform
register writes needs to be guarded for asynchronous updates to work.
The dc_lock mutex was added for this.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106175

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable GPU recovery by default for CI

I retested Bonaire (gfx7 dGPU) and it works fine.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix duplicating scaling/underscan connector state

[Why]
These properties aren't being carried over when the atomic state.
This tricks atomic check and commit tail into performing underscan
and scaling operations when they aren't needed.

With the patch that forced scaling/RMX_ASPECT on by default this
results in many unnecessary surface updates and hangs under certain
conditions.

[How]
Duplicate the properties.

Fixes: 91b66c47ba34 ("drm/amd/display: Set RMX_ASPECT as default")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unintialized max_bpc state values

[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.

Banding occurs for these displays.

[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.

Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Set RMX_ASPECT as default"

This reverts commit 91b66c47ba3468f7882ea4a84d5e0e0c186b638f.

Forcing RMX_ASPECT as default uses the preferred/native mode's timings
for any mode the user selects and scales the image. This provides a
a consistently nicer result in the case where the selected mode's
refresh rate matches the native mode's refresh but this isn't always
the case.

For example, if the monitor is 1080p@144Hz and the preferred mode is
60Hz then even if the user selects 1080p@144Hz as their selected mode
they'll get 1080p@60Hz.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix stub function name

This function was renamed in a previous commit. Update the stub
function name for builds with CONFIG_HSA_AMD disabled.

Fixes: 611736d8447c ("drm/amdgpu: Add KFD VRAM limit checking")
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/msm/dpu: Fix clock issue after bind failure

In case of msm drm bind failure, pm runtime put sync
is called from dsi driver which issues an asynchronous
put on mdss device. Subsequently when dpu_mdss_destroy
is triggered the change will make sure to put the mdss
device in suspend and clearing pending work if not
scheduled.

Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Clean up dpu_media_info.h static inline functions

Do some cleanup in the static inline functions defined in
dpu_media_info.h by cleaning up gotos and unneeded local
variables.

v3: Added spaces between operators per Seal Paul and Sam Ravnborg

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Further cleanups for static inline functions

Remove more static inline functions that are lightly used and/or
very simple and easy to build into the calling functions.

v3: Fix a nit from Sean Paul
v2: Removed another unused function from dpu_hw_lm.c and add back
dpu_crtc_get_client_type() since there was a question regarding
its usefulness.

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Cleanup the debugfs functions

Do some debugfs cleanups from across the DPU driver. The DRM
destroy functions will do a recursive delete on the entire
debugfs node so there is no need to store dentry pointers for
the debugfs files that are persistent for the life of the
driver. This also means that the destroy functions can go
away too.

Also, use standard API functions where applicable instead of
using hand written code.

v3: No changes
v2: Add more code; most of the dpu debugfs files should be
addressed now.

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Remove dpu_irq and unused functions

dpu_irq.c does some unneeded checks and passes control
to dpu_core_irq.c  The simple functions can be defined
in the same file where we use them and the files and
their associated hangers on can be deleted.

Additionally the postinstall hook isn't used even
in dpu_core_irq.c so zap that entire path.

v3: No changes

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Make irq_postinstall optional

Allow the KMS operation 'irq_postinstall' to be optional
so that the target display drivers don't need to define
a dummy function if they don't need one.

v3: No changes

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Cleanup callers of dpu_hw_blk_init

Outside of superfluous parameter checks the dpu_hw_blk_init()
doesn't have any failure paths. Switch it over to be a void
function and we can remove error handling paths in all the functions
that call it. While we're in those functions remove unneeded
initialization for a static variable.

v3: No changes
v2: Removed a cleanup intended for a different patch

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Remove unused functions

Remove some unused container_of() helper functions.

v3: No changes
v2: Retained still used helper functions in the name of readability

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Remove dpu_crtc_is_enabled()

The static inline function dpu_crtc_enabled() is only called once
and the function that calls it in turn is only called once and
the return value can be easily checked in the calling functions
so collapse everything down.

v3: No changes

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Remove dpu_crtc_get_mixer_height

dpu_crtc_get_mixer_height() is only used once and the value it
returns can be easily derived from the calling function.

v3: No changes

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Remove dpu_dbg

The functions in dpu_dbg.c aren't used. The two main dump functions
fail after a lookup from dpu_dbg_base.reg_base_list which turns out
to never be populated and once those are removed the rest of the
file doesn't make any sense.

v3: No changes
v2: Moved some unrelated changes to another patch

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove crtc_lock

Each time it's called we're holding the crtc modeset lock, so it's
redundant.

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove vblank_requested flag from dpu_crtc

It's just for debugfs output, we don't need it

Changes in v2:
- None

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Separate crtc assignment from vblank enable

Instead of assigning/clearing the crtc on vblank enable/disable, we can
just assign and clear the crtc on modeset. That allows us to just toggle
the encoder's vblank interrupts on vblank_enable.

So why is this important? Previously the driver was using the legacy
pointers to assign/clear the crtc. Legacy pointers are cleared _after_
disabling the hardware, so the legacy pointer was valid during
vblank_disable, but that's not something we should rely on.

Instead of relying on the core ordering the legacy pointer assignments
just so, we'll assign the crtc in dpu_crtc enable/disable. This is the
only place that mapping can change, so we're covered there.

We're also taking advantage of drm_crtc_vblank_on/off. By using this, we
ensure that vblank_enable/disable can never be called while the crtc is
off (which means the assigned crtc will always be valid). As such, we
don't need to use modeset locks or the crtc_lock in the
vblank_enable/disable routine to be sure state is consistent.

...I think.

Changes in v2:
- Changed crtc check in toggle_vblank to != (Jeykumar)

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[dpu_crtc.c change needed to be manually applied b/c of the dpu_crtc_reset change]

Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Don't bother checking ->enabled in dpu_crtc_vblank

The drm_crtc_vblank_on/off calls in enable/disable guarantee that we
won't call this function when crtc is not enabled.

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Use atomic_disable for dpu_crtc_disable

Matches dpu_crtc_enable and we'll need the old state in a future patch

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove vblank_callback from encoder

The indirection of registering a callback and opaque pointer isn't reall
useful when there's only one callsite. So instead of having the
vblank_cb registration, just give encoder a crtc and let it directly
call the vblank handler.

In a later patch, we'll make use of this further.

Changes in v2:
- None

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove crtc_lock from setup_mixers

I think the intention here was to protect the enc->crtc access, but
that's insufficient to avoid enc->crtc changing. Fortunately we're
already holding the modeset lock when this is called (from
atomic_check), so remove the crtc_lock and add a modeset lock check.

While we're at it, use the encoder mask from crtc state instead of
legacy pointer.

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Move pm_runtime_(get|put) from vblank_enable

There are 4 times that _dpu_crtc_vblank_enable_no_lock() is called:

1- crtc enable
2- crtc disable
3- crtc vblank enable
4- crtc vblank disable

When we enable or disable the crtc, we call drm_crtc_vblank_on and
drm_crtc_vblank_off respectively. That will gate vblank enables and
disables to only being called when the crtc is active. That means that
we can just enable/disable pm runtime in crtc enable/disable. This will
be beneficial in trying to eliminate blocking calls from the vblank call
chain.

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Add modeset lock checks where applicable

Add modeset lock checks to functions that could be called outside the
core atomic stack.

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Stop using encoder->crtc pointer

It's for legacy drivers, for atomic drivers crtc->state->encoder_mask
should be used to map encoder to crtc.

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict with async param of dpu_encoder_kickoff]

Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Grab the modeset locks in frame_event

This patch wraps dpu_core_perf_crtc_release_bw() with modeset locks
since it digs into the state objects.

Changes in v2:
- None
Changes in v3:
- Use those nifty new DRM_MODESET_LOCK_ALL_* helpers (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>