Felix Fietkau [Fri, 29 Jan 2016 23:19:19 +0000 (23:19 +0000)]
toolchain: fix default toolchain selection for mips64 added in r47355
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48554
Rafał Miłecki [Fri, 29 Jan 2016 22:31:43 +0000 (22:31 +0000)]
bcm53xx: specify magic expected in sysupgrade for D-Link DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48553
Rafał Miłecki [Fri, 29 Jan 2016 22:21:45 +0000 (22:21 +0000)]
oseama: support creating single Seama entity
This will be needed to handle sysupgrade on NAND in a smart way. We'll
need to extract kernel our of provided Seama container, put in in a new
Seama entity and flash.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48552
Jo-Philipp Wich [Fri, 29 Jan 2016 17:26:41 +0000 (17:26 +0000)]
firewall: drop invalid by default, remove chain indirection, fix invert flags (#21738)
* Enable drop_invalid by default to catch unnatted packets (#21738)
* Fix processing of inversions for -i, -o, -s, -d and -p flags
* Remove delegate_* chain indirection but rely on xt_id to identify own rules
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48551
Felix Fietkau [Fri, 29 Jan 2016 14:23:23 +0000 (14:23 +0000)]
mac80211: fix an out of bounds access issue in minstrel_ht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48550
Felix Fietkau [Fri, 29 Jan 2016 00:42:50 +0000 (00:42 +0000)]
lantiq: Make the ar9.dtsi sram node match "simple-bus"
All other SoC types are using "lantiq,sram" and "simple-bus" to ensure
that all child nodes are set up correctly during linux kernel
initialization (plat_of_setup(void) in arch/mips/lantiq/prom.c). Without
this some of sram child nodes might not be parsed.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48548
Felix Fietkau [Fri, 29 Jan 2016 00:42:45 +0000 (00:42 +0000)]
lantiq: Move the definition of the xrx200-net node to vr9.dtsi
This removes a lot of duplicate register and interrupt definitions by
moving the xrx200-net definition to vr9.dtsi and making all devices re-
use it.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48547
Felix Fietkau [Fri, 29 Jan 2016 00:42:38 +0000 (00:42 +0000)]
lantiq: fix PHY state handling issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48546
Felix Fietkau [Fri, 29 Jan 2016 00:38:49 +0000 (00:38 +0000)]
kernel: remove .config.prev when running make kernel_*config to fix rebuild errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48545
Rafał Miłecki [Thu, 28 Jan 2016 22:58:54 +0000 (22:58 +0000)]
linux-firmware: update to the commit from 2016-01-25
This adds e.g. BCM4350 rev 5 and BCM4366 firmwares (not packaged yet).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48544
Felix Fietkau [Thu, 28 Jan 2016 22:42:49 +0000 (22:42 +0000)]
malta: move to 4.4 kernel
Linux now has device tree support for malta. The patch for correcting
/proc/iomem content is not needed now. Previously it was
root@(none):/# cat /proc/iomem
00000000-
00000fff : reserved
00001000-
000effff : System RAM
000f0000-
000fffff : reserved
00100000-
0fffefff : System RAM
00100000-
003f2b6b : Kernel code
003f2b6c-
00485937 : Kernel data
...
Now it's
root@OpenWrt:/# cat /proc/iomem
00000000-
0fffefff : System RAM
00100000-
004a3297 : Kernel code
004a3298-
0057cfff : Kernel data
...
The kernel config was prepared as follows
1. cp target/linux/malta/config-{3.18,4.4}
2. make kernel_menuconfig CONFIG_TARGET=subtarget_platform
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 48543
Felix Fietkau [Thu, 28 Jan 2016 22:42:44 +0000 (22:42 +0000)]
tools/mkimage: backport SOURCE_DATE_EPOCH for reproducible builds
This pulls in Paul Kocialkowski's SOURCE_DATE_EPOCH support patch for u-boot,
which landed upstream circa July 2015. Note that this "host" u-boot repo is
only used to compile the 'mkimage' utility, and isn't used to actually compile
a bootloader for any target.
This patch could be removed if/when the host u-boot package is updated to a
contemporary version (but there doesn't seem to be any motivation/need to do
so).
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix portability error, refresh patches]
SVN-Revision: 48542
Felix Fietkau [Thu, 28 Jan 2016 22:42:34 +0000 (22:42 +0000)]
include/kernel: add custom USER/DOMAIN config options
These allow the generated kernel's build metadata to be defined explicitly.
This metadata is reported, eg, at boot time and in `uname -a` on running
systems. If the variables aren't configured, the current build system username
and hostname are used as normal.
The motivation for this option is to achive reproducible (bit-for-bit
identical) kernel builds of official openwrt releases.
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48541
Felix Fietkau [Thu, 28 Jan 2016 22:42:29 +0000 (22:42 +0000)]
include/kernel: sort module lists for reproducibility
This is to get reproducible builds of, eg, the kmod-sched ipkg.
Locale preferences can change build order, but the locale is already been
defined for the entire build process, so it doesn't need to be specified here.
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
SVN-Revision: 48540
Felix Fietkau [Thu, 28 Jan 2016 22:42:25 +0000 (22:42 +0000)]
busybox: disable timestamp in version
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 48539
Felix Fietkau [Thu, 28 Jan 2016 22:42:18 +0000 (22:42 +0000)]
Makefile: set timezone to UTC
This is necessary for reproducible image builds.
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
SVN-Revision: 48538
Felix Fietkau [Thu, 28 Jan 2016 22:42:14 +0000 (22:42 +0000)]
hostapd: remove useless TLS provider selection override for wpad-mesh/wpa_supplicant-mesh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48537
Felix Fietkau [Thu, 28 Jan 2016 22:42:10 +0000 (22:42 +0000)]
mac80211: merge a bunch of pending fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48536
Rafał Miłecki [Thu, 28 Jan 2016 22:38:37 +0000 (22:38 +0000)]
bcm53xx: basic support for Seama format in sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48535
Rafał Miłecki [Thu, 28 Jan 2016 22:38:30 +0000 (22:38 +0000)]
mtd: allow writing Seama files to "firmware" on Broadcom targets
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48534
Rafał Miłecki [Thu, 28 Jan 2016 22:38:23 +0000 (22:38 +0000)]
oseama: small util for reading Seama image format info
It's similar to otrx, we need this tool for handling sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48533
Felix Fietkau [Thu, 28 Jan 2016 18:20:06 +0000 (18:20 +0000)]
openssl: update to 1.0.2f (fixes CVE-2016-0701, CVE-2015-3197)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48531
Felix Fietkau [Thu, 28 Jan 2016 18:19:59 +0000 (18:19 +0000)]
x86: remove redundant default network config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48530
Felix Fietkau [Thu, 28 Jan 2016 17:20:10 +0000 (17:20 +0000)]
hostapd: fix mesh interface bridge handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48529
Felix Fietkau [Thu, 28 Jan 2016 17:19:48 +0000 (17:19 +0000)]
hostapd: fix wpad-mesh and wpa-supplicant-mesh configuration issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48528
Felix Fietkau [Thu, 28 Jan 2016 17:19:13 +0000 (17:19 +0000)]
hostapd: update to version 2016-01-15
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48527
Felix Fietkau [Thu, 28 Jan 2016 14:13:01 +0000 (14:13 +0000)]
ramips: make tp-link firmware size errors non-fatal
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48526
Felix Fietkau [Thu, 28 Jan 2016 13:13:14 +0000 (13:13 +0000)]
kernel: fix USB on mpc85xx (#21689)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48525
Felix Fietkau [Thu, 28 Jan 2016 11:23:50 +0000 (11:23 +0000)]
uclient: update to the latest version, fixes connection timeout handling (#21726)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48524
Felix Fietkau [Thu, 28 Jan 2016 11:22:49 +0000 (11:22 +0000)]
libubox: update to the latest version, adds usock_inet_timeout() with RFC6555 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48523
Rafał Miłecki [Thu, 28 Jan 2016 08:51:58 +0000 (08:51 +0000)]
bcm53xx: fix MD5 in Seama format on flash after installing OpenWrt
We need to fix Seama just like we fix TRX due to the rootfs mark.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48522
Rafał Miłecki [Thu, 28 Jan 2016 08:51:52 +0000 (08:51 +0000)]
mtd: enable "fixseama" on bcm53xx
There are D-Link bcm53xx devices using Seama format.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48521
Rafał Miłecki [Thu, 28 Jan 2016 08:51:46 +0000 (08:51 +0000)]
bcm53xx: enable earlyprintk and all RAM on DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48520
Rafał Miłecki [Thu, 28 Jan 2016 07:01:23 +0000 (07:01 +0000)]
bcm53xx: add D-Link DIR-885L DT patch
We don't build image for this device yet.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48519
Rafał Miłecki [Thu, 28 Jan 2016 07:01:17 +0000 (07:01 +0000)]
bcm53xx: replace iproc regression fix with the final one
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48518
Rafał Miłecki [Thu, 28 Jan 2016 07:01:09 +0000 (07:01 +0000)]
bcm53xx: use two upstream USB bcma patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48517
Rafał Miłecki [Thu, 28 Jan 2016 07:00:44 +0000 (07:00 +0000)]
kernel: backport more 4.6 bcma stuff needed for new chipsets
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48516
Felix Fietkau [Thu, 28 Jan 2016 00:26:38 +0000 (00:26 +0000)]
build: filter out -fno-plt for the kernel build, fixes #21712
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48515
Felix Fietkau [Wed, 27 Jan 2016 23:58:19 +0000 (23:58 +0000)]
mt76: update to the latest version, adds some tx path and protection mode register fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48514
Felix Fietkau [Wed, 27 Jan 2016 21:40:43 +0000 (21:40 +0000)]
kernel: add missing config symbols for kmod-crypto-hw-talitos
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48513
Felix Fietkau [Wed, 27 Jan 2016 21:39:16 +0000 (21:39 +0000)]
kernel: change the OF mtd mac address patch to prefer mtd-mac-address over other properties
Fixes MAC address on TL-WDR4900
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48512
Jo-Philipp Wich [Wed, 27 Jan 2016 20:47:44 +0000 (20:47 +0000)]
brcm47xx: add proper switch port mapping for WRT610Nv2 / Linksys E3000v1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48511
Rafał Miłecki [Wed, 27 Jan 2016 12:44:07 +0000 (12:44 +0000)]
bcm53xx: switch to kernel 4.4
Initially 4.4 didn't work on bcm53xx because network was breaking few
seconds after setting interfaces. It's fixed since r48059 (switching
from 4.4-rc5 to 4.4-rc7).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48510
Rafał Miłecki [Wed, 27 Jan 2016 10:40:58 +0000 (10:40 +0000)]
bcm53xx: detect Seama sysupgrade format
It's used e.g. by D-Link devices. We don't support it yet.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48509
Felix Fietkau [Tue, 26 Jan 2016 16:45:11 +0000 (16:45 +0000)]
ramips: fix image size checks for Buffalo WSR-1166 and WSR-600
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48508
Luka Perkov [Tue, 26 Jan 2016 15:27:42 +0000 (15:27 +0000)]
generic: mark CONFIG_SUNXI_SRAM as not set
It is marked like this on most targets.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 48507
Luka Perkov [Tue, 26 Jan 2016 11:30:45 +0000 (11:30 +0000)]
generic: 4.4: refresh patches
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
SVN-Revision: 48506
Felix Fietkau [Tue, 26 Jan 2016 09:32:22 +0000 (09:32 +0000)]
ubus: update to the latest version, fixes a memory leak on client disconnect
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48505
Felix Fietkau [Tue, 26 Jan 2016 08:39:21 +0000 (08:39 +0000)]
build: do not deselect CONFIG_USE_SSTRIP if CONFIG_DEBUG is enabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48504
Felix Fietkau [Tue, 26 Jan 2016 00:10:19 +0000 (00:10 +0000)]
ustream-ssl: update to the latest version, fixes hostname validation with openssl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48503
Hauke Mehrtens [Mon, 25 Jan 2016 23:29:18 +0000 (23:29 +0000)]
x86: add BACKLIGHT_APPLE configuration option
This closes #21713.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48502
Hauke Mehrtens [Mon, 25 Jan 2016 23:26:19 +0000 (23:26 +0000)]
musl: fix mips vdso handling
mips returns -ENOSYS in case it can not handle the vdso call and wants
the libc to call the original syscall in such a case. This fixes the
patch to add such handling. I hope this fixes the random reboots I got.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48501
Felix Fietkau [Mon, 25 Jan 2016 23:05:49 +0000 (23:05 +0000)]
usign: force installation to $(STAGING_DIR_HOST)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48500
Luka Perkov [Mon, 25 Jan 2016 22:54:52 +0000 (22:54 +0000)]
kirkwood: drop 4.3 support
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
SVN-Revision: 48499
Hauke Mehrtens [Mon, 25 Jan 2016 21:44:48 +0000 (21:44 +0000)]
kernel: update kernel 4.3 to version 4.3.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48498
Hauke Mehrtens [Mon, 25 Jan 2016 21:44:12 +0000 (21:44 +0000)]
kernel: update kernel 4.1 to version 4.1.16
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48497
Hauke Mehrtens [Mon, 25 Jan 2016 21:43:26 +0000 (21:43 +0000)]
kernel: update kernel 3.18 to 3.18.26
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48496
Jo-Philipp Wich [Mon, 25 Jan 2016 17:47:22 +0000 (17:47 +0000)]
dnsmasq: Don't add local hostname if ula prefix is not specified
Commit
6a7e56b adds support for adding local hostname for own lan ula adress
but if ula prefix is not specified results into an invalid config (address=/OpenWrt.lan/1)
causing dnsmasq not to start up.
Use lanaddr6 when adding local hostname as the lan ula address is constructed based on the
UCI parameters ip6hint and ip6ifaceid and thus not always ula prefix suffixed with 1
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 48495
Felix Fietkau [Mon, 25 Jan 2016 17:42:25 +0000 (17:42 +0000)]
package/uhttpd: generate 2048 bit RSA key
RSA keys should be generated with sufficient length.
Using 1024 bits is considered unsafe.
In other packages the used key length is 2048 bits.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
SVN-Revision: 48494
Felix Fietkau [Mon, 25 Jan 2016 16:30:41 +0000 (16:30 +0000)]
base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48493
Felix Fietkau [Mon, 25 Jan 2016 15:49:49 +0000 (15:49 +0000)]
include/cmake.mk: search in $(STAGING_DIR)/usr instead of plain $(STAGING_DIR) to avoid picking up stuff from host/
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48492
Felix Fietkau [Mon, 25 Jan 2016 15:49:44 +0000 (15:49 +0000)]
include/cmake.mk: adjust for STAGING_DIR_HOST split
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48491
Felix Fietkau [Mon, 25 Jan 2016 15:49:36 +0000 (15:49 +0000)]
mac80211: add iremap cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48490
Felix Fietkau [Mon, 25 Jan 2016 15:49:31 +0000 (15:49 +0000)]
build: use -iremap feature to replace __FILE__ absolute path names in packages with ones relative to $(BUILD_DIR)
improves reproducible builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48489
Jo-Philipp Wich [Mon, 25 Jan 2016 15:04:29 +0000 (15:04 +0000)]
iwinfo: add support for VHT rates to Lua binding
Update to Git HEAD in order to include VHT rate support in the Lua binding.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48488
Jo-Philipp Wich [Mon, 25 Jan 2016 14:31:32 +0000 (14:31 +0000)]
iwinfo: add support for VHT rates
Update to upstream Git HEAD to include VHT rate support and a number of
coverity scan fixes.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48487
Felix Fietkau [Mon, 25 Jan 2016 12:42:00 +0000 (12:42 +0000)]
musl: update to 1.1.12 + git from 2016-01-22
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48486
Felix Fietkau [Mon, 25 Jan 2016 12:41:55 +0000 (12:41 +0000)]
gcc: backport a libgcc fix for a dependency on libc write() on ARM
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48485
Felix Fietkau [Mon, 25 Jan 2016 12:41:19 +0000 (12:41 +0000)]
kernel: wpan: mrf24j40 depends on regmap-spi
kmod-mrf24j40 select REGMAP_SPI since 4.3, thus add dependency to
kmod-regmap.
Found by buildbot:
Package kmod-mrf24j40 is missing dependencies for the following libraries:
regmap-spi.ko
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 48484
Felix Fietkau [Mon, 25 Jan 2016 12:35:21 +0000 (12:35 +0000)]
base-files: fix sysupgrade 'wget' handling for uclient-fetch
change 48451 tried to add support for uclient-fetch by moving
/usr/bin/wget to /bin/wget, but this change kept the symbolic
link to /bin/busybox as install_bin creates links to param 1
the desired fix is to link to uclient-fetch to wget:
install_bin /bin/uclient-fetch /bin/wget
Signed-off-by: John Clark <inindev@gmail.com>
SVN-Revision: 48483
Felix Fietkau [Mon, 25 Jan 2016 10:28:29 +0000 (10:28 +0000)]
kernel: fix a small bug in the MIPS highmem fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48482
Felix Fietkau [Mon, 25 Jan 2016 10:28:19 +0000 (10:28 +0000)]
kernel: disable CONFIG_USERFAULTFD, it is unused
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48481
Rafał Miłecki [Mon, 25 Jan 2016 07:18:47 +0000 (07:18 +0000)]
kernel: mtdsplit: document Seama splitter a bit
Rename kernel_size variable as it includes whole entity size, not just a
kernel size. Also update comments to match it and describe better what
are we checking/looking for.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48480
Jo-Philipp Wich [Sun, 24 Jan 2016 18:01:43 +0000 (18:01 +0000)]
include: restrict separate kmod repo handling to base packages
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48479
Jo-Philipp Wich [Sun, 24 Jan 2016 18:01:40 +0000 (18:01 +0000)]
iptables: improve iptables listing output of xt_id match
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48478
Hauke Mehrtens [Sun, 24 Jan 2016 18:00:53 +0000 (18:00 +0000)]
kernel: add some missing kernel config options
The built bots found these missing kernel configuration options.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48477
Jo-Philipp Wich [Sun, 24 Jan 2016 15:36:10 +0000 (15:36 +0000)]
x86/64: add missing kernel symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48476
Jo-Philipp Wich [Sun, 24 Jan 2016 15:36:05 +0000 (15:36 +0000)]
include: group kmod ipk files into a "kernel" subdirectory
This is useful to just use the kmods from an official build while supplying
base packages from a custom feed or the other way around; for just overriding
the kmods with a local repo while using official repos for the rest.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48475
Jonas Gorski [Sun, 24 Jan 2016 12:36:15 +0000 (12:36 +0000)]
generic: fix relocate build with binutils 2.25.1
The new .abiflags section was kept, pushing the appended arguments to
the wrong offset and causing it to read the section instead, making
it fail on boot.
Fix this by dropping this section as well as the other sections.
Closes #21679.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48474
Jonas Gorski [Sun, 24 Jan 2016 12:36:10 +0000 (12:36 +0000)]
brcm63xx: fix build of lzma-loader with binutils 2.25.1
Apply the same fix as ar71xx needed in r46893.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48473
Jonas Gorski [Sun, 24 Jan 2016 12:36:06 +0000 (12:36 +0000)]
swconfig: simplify init code
Directly return the return value of genl_register_family_with_ops()
instead of storing it in a temporary variable, then returning it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48472
Jonas Gorski [Sun, 24 Jan 2016 12:35:59 +0000 (12:35 +0000)]
swconfig: drop linux < 3.13 code paths
The oldest kernel we support is 3.18, no need to keep code paths
for older kernels.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48471
Felix Fietkau [Sun, 24 Jan 2016 00:16:36 +0000 (00:16 +0000)]
build: add -fno-plt to default cflags, it improves PIC code optimization
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48470
Felix Fietkau [Sun, 24 Jan 2016 00:16:32 +0000 (00:16 +0000)]
ramips: re-enable highmem support for MT7621 now that it's fixed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48469
Felix Fietkau [Sun, 24 Jan 2016 00:16:27 +0000 (00:16 +0000)]
kernel: fix MIPS highmem breakage
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48468
Hauke Mehrtens [Sun, 24 Jan 2016 00:05:14 +0000 (00:05 +0000)]
musl: Add format attribute to some function declarations
GCC and Clang are able to check the format arguments given to a
function and warn the user if there is a error in the format arguments
or if there is a potential uncontrolled format string security problem
in the code. GCC does this automatically for some functions like
printf(), but it is also possible to annotate other functions in a way
that it will check them too. This feature is used by glibc for many
functions. This patch adds the attribute to the some functions of musl
expect for these functions where gcc automatically adds it.
GCC automatically adds checks for these functions: printf, fprintf,
sprintf, scanf, fscanf, sscanf, strftime, vprintf, vfprintf and
vsprintf.
The documentation from gcc is here:
https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html
The documentation from Clang is here:
http://clang.llvm.org/docs/AttributeReference.html#format-gnu-format
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48467
Hauke Mehrtens [Sat, 23 Jan 2016 23:48:55 +0000 (23:48 +0000)]
musl: mips: add vdso support
vdso support is available on mips starting with kernel 4.4, see kernel
commit
a7f4df4e21 "MIPS: VDSO: Add implementations of gettimeofday()
and clock_gettime()" for details.
These are my micro benchmark results for 1.000.000 calls to
clock_gettime(CLOCK_MONOTONIC, &tp)
without vdso:
root@OpenWrt:/# time ./vdso-test
real 0m 0.95s
user 0m 0.24s
sys 0m 0.70s
with vdso:
root@OpenWrt:/# time /usr/bin/vdso-test
real 0m 0.35s
user 0m 0.34s
sys 0m 0.00s
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48466
Felix Fietkau [Sat, 23 Jan 2016 20:02:34 +0000 (20:02 +0000)]
uclient: update to the latest version, now truncates files when overwriting them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48465
Felix Fietkau [Sat, 23 Jan 2016 20:01:26 +0000 (20:01 +0000)]
kernel: add a package for bcm-phy-lib.ko, fixes build errors with kmod-phy-broadcom
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48464
Felix Fietkau [Sat, 23 Jan 2016 18:53:17 +0000 (18:53 +0000)]
uclient: update to the latest version, improves interoperability with quirky servers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48463
Felix Fietkau [Sat, 23 Jan 2016 18:53:12 +0000 (18:53 +0000)]
ustream-ssl: update to the latest version, fixes handling SSL connection close notification
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48462
Felix Fietkau [Sat, 23 Jan 2016 18:02:59 +0000 (18:02 +0000)]
kernel: add a fix for deadlocks on dump_stack
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48461
Felix Fietkau [Sat, 23 Jan 2016 18:02:55 +0000 (18:02 +0000)]
Revert "kernel: work around CONFIG_CPU_SW_DOMAIN_PAN breakage on ARM11 MPCore"
This reverts commit r48335
The workaround is incomplete and cannot cover all possible cases. The
only real solution to this problem is to disable this feature on
ARM11MPcore entirely.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48460
Felix Fietkau [Sat, 23 Jan 2016 17:05:56 +0000 (17:05 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48459
Felix Fietkau [Sat, 23 Jan 2016 15:24:19 +0000 (15:24 +0000)]
linux-atm: add missing br2684ctl patch chunk
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48458
Felix Fietkau [Sat, 23 Jan 2016 12:37:17 +0000 (12:37 +0000)]
ltq-vdsl-app: mask out VDSL bits when ATM is selected, fixes compatibility issues with some DSLAMs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48457
Felix Fietkau [Fri, 22 Jan 2016 19:50:09 +0000 (19:50 +0000)]
Revert "ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4"
This reverts commit r48276.
This can overwrite the caldata_backup partition, so the layout needs to
be changed in a different way.
Thanks to Arjen de Korte for spotting the issue.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48456
Felix Fietkau [Fri, 22 Jan 2016 13:06:09 +0000 (13:06 +0000)]
qos-scripts: bump version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48455
Felix Fietkau [Fri, 22 Jan 2016 12:02:11 +0000 (12:02 +0000)]
kernel: Add kernel module for Freescale SNVS RTC on chip module
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 48454
Felix Fietkau [Fri, 22 Jan 2016 12:02:07 +0000 (12:02 +0000)]
x86_64: Add missing symbols
Update to kernel 4.4 missed some symbols, fix that.
SVN-Revision: 48453
projects / openwrt / staging / mans0n.git / log