drm/amd/display: Adding forgotten hubbub func

[why]
While doing seamless boot I made some changes
to dcn2 hubbub functions, missed a link

[how]
link hubbub1 func to hubbub2 usage. It has already
been successfully linked in dcn1 and 3.

Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable secondary link for certain monitors

[why]
If the specific monitor supports DSC, the secondary link should be
disabled, and the other way around, too: if either that monitor or
our ASIC doesn't support DSC, the secodary link should be enabled.

[how]
Add a monitor patch and disable secondary link if that monitor
is detected and if ASIC supports DSC, or otherwise enable secondary
link.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix 300Hz Freesync bug

Needed to reprogram vblank_start in dml properly in order to get the
correct dlg params to program VTG.

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix chroma vp wa corner case

[Why]
Previous implementation we may have residual chroma address offset
if transition from wa enable -> wa disable.

[How]
Clear address offset cache when viewport updates. Also update the
vp size check condition to account for rotation angle

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.65

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear state after exiting fixed active VRR state

[why]
Upon exiting a fixed active VRR state, the state isn't cleared. This
leads to the variable VRR range to be calculated incorrectly.

[how]
Set fixed active state to false when updating vrr params

Signed-off-by: Amanda Liu <amanda.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include: Add OCSC registers

Add registers for handling Post Gamma Color Blending (OCSC), which is
useful for conversion from RGB->YUV for HDMI.

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: fix documentation by replacing rq_list with sched_list

This also replaces old artifacts with a correct one in drm_sched_entity_init()
declaration

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add arcturus to gpu recovery check code path

support check if dirver should try gpu recovery for
arcturus

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check if driver should try recovery in ras recovery path

To allow the flexibilty for user to disable gpu recovery
in RAS recovery path by module parameter amdgpu_gpu_recovery

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: a quick fix for the deadlock issue below

NFO: task ocltst:2028 blocked for more than 120 seconds.
     Tainted: G           OE     5.0.0-37-generic #40~18.04.1-Ubuntu
echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
cltst          D    0  2028   2026 0x00000000
all Trace:
__schedule+0x2c0/0x870
schedule+0x2c/0x70
schedule_preempt_disabled+0xe/0x10
__mutex_lock.isra.9+0x26d/0x4e0
__mutex_lock_slowpath+0x13/0x20
? __mutex_lock_slowpath+0x13/0x20
mutex_lock+0x2f/0x40
amdgpu_dpm_set_powergating_by_smu+0x64/0xe0 [amdgpu]
gfx_v8_0_enable_gfx_static_mg_power_gating+0x3c/0x70 [amdgpu]
gfx_v8_0_set_powergating_state+0x66/0x260 [amdgpu]
amdgpu_device_ip_set_powergating_state+0x62/0xb0 [amdgpu]
pp_dpm_force_performance_level+0xe7/0x100 [amdgpu]
amdgpu_set_dpm_forced_performance_level+0x129/0x330 [amdgpu]

Fixes: a64c9e15e624 ("drm/amd/powerplay: cleanup the interfaces for powergate setting through SMU")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Rui Teng <Rui.Teng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: only set cp active field for kiq queue

The mec ucode will set the CP_HQD_ACTIVE bit while the queue is mapped by
MAP_QUEUES packet. So we only need set cp active field for kiq queue.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add a message when SW scheduler is used

SW scheduler is previously called non HW scheduler, or non HWS. This
message is useful when triaging issues from dmesg.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: clean up return types

count is size_t so don't use negative values.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: improve job distribution with multiple queues

This patch uses score based logic to select a new rq for better
loadbalance between multiple rq/scheds instead of num_jobs.

Below are test results after running amdgpu_test from mesa drm

Before this patch:

sched_name     num of many times it got scheduled
=========      ==================================
sdma0          314
sdma1          32
comp_1.0.0     56
comp_1.0.1     0
comp_1.1.0     0
comp_1.1.1     0
comp_1.2.0     0
comp_1.2.1     0
comp_1.3.0     0
comp_1.3.1     0
After this patch:

sched_name     num of many times it got scheduled
=========      ==================================
sdma0          216
sdma1          185
comp_1.0.0     39
comp_1.0.1     9
comp_1.1.0     12
comp_1.1.1     0
comp_1.2.0     12
comp_1.2.1     0
comp_1.3.0     12
comp_1.3.1     0

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn2.5: implement indirect DPG SRAM mode

Implement indirect DPG SRAM mode for vcn2.5

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn2.5: add dpg pause mode

Add dpg pause mode support for vcn2.5

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn2.5: add DPG mode start and stop

Add DPG mode start and stop functions for vcn2.5

v2: Correct firmware ucode index in vcn_v2_5_mc_resume_dpg_mode

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: move macro from vcn2.0 to share amdgpu_vcn (v2)

Move macro from vcn2.0 to amdgpu_vcn to share with vcn2.5

v2: squash in macro fix

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: support multiple instance direct SRAM read and write (v2)

Add multiple instance direct SRAM read and write support for vcn2.5

v2: squash in indexing fix

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: support multiple-instance dpg pause mode

Add multiple-instance dpg pause mode support for VCN2.5

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov skip the update of SMU_TABLE_ACTIVITY_MONITOR_COEFF

There's no need to dump ACTIVITY_MONITOR_COEFF under VF.
Therefore, Skip the update of SMU_TABLE_ACTIVITY_MONITOR_COEFF
under SRIOV VF.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix modprobe failure of the secondary GPU when GDDR6 training enabled(V5)

[why]
In dual GPUs scenario, stolen_size is assigned to zero on the secondary GPU,
since there is no pre-OS console using that memory. Then the bottom region of
VRAM was allocated as GTT, unfortunately a small region of bottom VRAM was
encroached by UMC firmware during GDDR6 BIST training, this cause page fault.

[how]
Forcing stolen_size to 3MB, then the bottom region of VRAM was
allocated as stolen memory, GTT corruption avoid.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: update gfx golden settings for navi14

remove registers: mmSPI_CONFIG_CNTL
add registers: mmSPI_CONFIG_CNTL_1

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: update gfx golden settings

remove registers: mmSPI_CONFIG_CNTL
add registers: mmSPI_CONFIG_CNTL_1

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check rlc_g firmware pointer is valid before using it

In SRIOV, rlc_g firmware is loaded by host, guest driver won't load it which will
cause the rlc_fw pointer is null

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop amdgpu_job.owner

Entirely unused.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: error out on entity with no run queue

Disabled HW IP's entity initialized with NULL rq. We should not
process any submit request from userspace for a disabled HW IP.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use map_queues for hiq on gfx v10 as well

To align with gfx v9, we use the map_queues packet to load hiq MQD.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use kiq to load the mqd of hiq queue for gfx v9 (v6)

There is an issue that CP will check the HIQ queue to be configured and mapped
with KIQ ring, otherwise, it will be unable to read back the secure buffer while
the gfxoff is enabled even with trusted IP blocks.

v1 -> v2:
- Fix to remove surplus set_resources packets.
- Fill the whole configuration in MQD.
- Change the author as Aaron because he addressed the key point of this issue.
- Add kiq ring lock.

v2 -> v3:
- Free the lock while in error return case.
- Remove the programming only needed by the queue is unmapped.

v3 -> v4:
- Remove doorbell programming because it's used for restarting queue.
- Remove CP scheduler programming because map_queue packet will handle this.

v4 -> v5:
- Remove cp_hqd_active because mec ucode will enable it while use map_queues.
- Revise goto out_unlock.
- Correct the right doorbell offset for HIQ that kfd driver assigned in the
  packet.

v5 -> v6:
- Merge Arcturus fix into this patch because it will get oops in Arcturus
  platform.

Reported-by: Lisa Saturday <Lisa.Saturday@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-and-Tested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: flush TLB functions removal from kfd2kgd interface

[Why]
kfd2kgd interface will be deprecated. This removal only covers TLB
invalidation for now. They have been replaced in amdgpu_amdkfd API.

[How]
TLB invalidate functions removed from the different amdkfd_gfx_v*
versions.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: GPU TLB flush API moved to amdgpu_amdkfd

[Why]
TLB flush method has been deprecated using kfd2kgd interface.
This implementation is now on the amdgpu_amdkfd API.

[How]
TLB flush functions now implemented in amdgpu_amdkfd.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: export function to flush TLB via pasid

This can be used directly from amdgpu and amdkfd to invalidate
TLB through pasid.
It supports gmc v7, v8, v9 and v10.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: replace kcq enable/disable functions on gfx_v9

[Why]
There are HW-indpendent functions that enables and disables kcq. These functions use
the kiq_pm4_funcs implementation.

[How]
Local kcq enable and disable functions removed and replace it by the generic kcq
enable under amdgpu_gfx

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement tlbs invalidate on gfx9 gfx10

tlbs invalidate pointer function added to kiq_pm4_funcs struct.
This way, tlb flush can be done through kiq member.
TLBs invalidatation implemented for gfx9 and gfx10.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: kiq pm4 function implementation for gfx_v9

Functions implemented from kiq_pm4_funcs struct members
for gfx_v9 version.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Avoid reclaim fs while eviction lock

[Why]
Avoid reclaim filesystem while eviction lock is held called from
MMU notifier.

[How]
Setting PF_MEMALLOC_NOFS flags while eviction mutex is locked.
Using memalloc_nofs_save / memalloc_nofs_restore API.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/debugfs: properly handle runtime pm

If driver debugfs files are accessed, power up the GPU
when necessary.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: properly handle runtime pm

If power management sysfs or debugfs files are accessed,
power up the GPU when necessary.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add header file for macro SZ_1M

Fixes: 4dee6e4ca50a ("drm/amdgpu: use linux size macro to simplify ONE_Kib & One_Mib")
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unnecessary conversion to bool

The conversion to bool is not needed, remove it.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reorder detect_edp_sink_caps before link settings read.

read_current_link_settings_on_detect() on eDP 1.4+ may use the
edp_supported_link_rates table which is set up by
detect_edp_sink_caps(), so that function needs to be called first.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Martin Leung <martin.leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: declare navi1x ta firmware

So that it gets included in the initrd.  At the moment
this is optional firmware that contains support for HDCP.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Match TC hash settings to DF settings (v2)

On Arcturus, data fabric hashing is set by the VBIOS, and
affects which addresses map to which memory channels. The
gfx core's caches also need to know this mapping, but the
hash settings for these these caches is set by the driver.

This change queries the DF to understand how the VBIOS
configured DF, then matches the TC hash configuration bits
to do the same thing.

v2: squash in warning fix

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add defines for DF and TCP Hashing

On Arcturus, we need TC channel hashing, which is set by the
driver, to match DF hashing, which is set by VBIOS. To match
these, we plan to query the DF information and then properly
set the TC configuration bits to match them.

This patch adds the required fields to register definitions
in preparation for a future patch which will use them.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Create generic DF struct in adev

The only data fabric information the adev struct currently
contains is a function pointer table. In the near future,
we will be adding some cached DF information into adev. As
such, this patch creates a new amdgpu_df struct for adev.
Right now, it only containst the old function pointer table,
but new stuff will be added soon.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add Pollock IDs, fix Pollock & Dali clk mgr construct

[WHY]
Only a single voltage level should be available to Pollock (min level)
Pollock & Dali get misidentified as Renoir, use wrong clk mgr constructor

[HOW]
Add provided Pollock IDs to ASIC Rev. ID list.
Create new Pollock ASIC RID check, fix RV2 & Dali ASIC checks.
Check RID and set max voltage level to 0 if Pollock is detected.
Work around broken ASICREV_IS_RENOIR, IS_RAVEN2, etc. checks by
performing Dali/Pollock checks before they can be misidentified as RN.

Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: preserve RSMU UMC index mode state

between UMC RAS err register access restore previous RSMU UMC index mode state

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable XGMI TA unload for arcturus

in event of GPU reset, XGMI TA unload causes unrecoverable GPU hang

Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update goldensetting for renoir

Update mmSDMA0_UTCL1_WATERMK golden setting for renoir.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update SMU12_DRIVER_IF_VERSION to 11

This patch updates SMU12_DRIVER_IF_VERSION to 11.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: free stolen memory in late_init

We don't need to store the pre-OS console memory after
the driver has loaded so free it.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: remove dead code

Leftover from bring up.  We look up the actual pre-OS memory usage
value later in the same function.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: set gpu vm flag for renoir

It won't get used unless the driver allows the gtt domain for
display buffers which is controlled elsewhere.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable S/G display on PCO and RV2 (v2)

It should work on all Raven variants, but some users have
reported issues with original Raven with IOMMU enabled.
So far there have been no issues observed with PCO or RV2.

v2: split out the dm init and domain changes into separate
    patches.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: set gpu vm flag for all asics which support it

It won't get used unless the driver allows the gtt domain for
display buffers which is controlled elsewhere.

Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: remove unused sdma headers

All of the sdma stuff these were used for moves to
the sdma code, so remove them.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add missing umc_6_1_2_sh_mask.h header file (v2)

(v2): Fix preprocessor tag

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check sdma ras funcs pointer before accessing

sdma ras funcs are not supported by ASIC prior
to vega20

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: calculate MCUMC_ADDRT0 per asic's UMC offset

Hardcoded offset is not friendly. And another benifit of this
patch is to keep read and write access to this register be
consistent with other similar UMC regsiters  in this file.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add MCUMC_ADDRT0 offset to ip header file

Both are needed on vega20 and arcturus chip.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: fix warning in smu_v11_0.c

Cast to make min() happy.  The values are well within
range.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: sw ctf for arcturus

change the sw ctf setting to smu_v11_0_set_thermal_range()
since software_shutdown_temp shares the same definition and
name in all the smu11 project.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov: workaround on rev_id for Navi12 under sriov

guest vm gets 0xffffffff when reading RCC_DEV0_EPF0_STRAP0,
as a consequence, the rev_id and external_rev_id are wrong.

workaround it by hardcoding the rev_id to 0, which is the default value.

v2. add comment in the code

Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't disable DP PHY when link loss happens

[Why]
There is a use case that link loss happens accidentally,
and we need to recover that link loss as soon as possible.
Under this circumstance, we will perform link training,
and try to recover the link that's just lost.

However, if link PHY is disabled before link training
happens, then DP display will never come back again.

Also, please note that dropping this disable_phy function
call won't break USB-C hotplug functionality.
(This line of code was firstly introduced associated with
a patch to fix USB-C hotplug issue)

[How]
Don't disable DP transmitter and its encoder before link
training happens, even if link loss is detected.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: read sdma edc counter to clear the counters

SDMA edc counter registers were added in gfx edc counters
array. When querying gfx error counter in that array, there
is no way to differentiate sdma instance number for different
asic and then results to NULL pointer access when trying to
read sdma register base address for instances greater
than 2 on Vega20.
In addition, this also results to wrong gfx error counters
since it actually added sdma edc counters.
Therefore, sdma edc counter registers should be separated
from gfx edc counter regsiter array and only get initialized
when driver tries to enable sdma ras.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras_late_init and ras_fini for sdma v4

move ras_late_init and ras_fini to sdma_ras_funcs table

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support error reporting for sdma ip block

invoke sdma query_ras_error_count to get sdma single
bit error count

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add query_ras_error_count function for sdma v4

query_ras_error_count function will be invoked to query
single bit error count detected in sdma ip block

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable VCN2.5 IP block for Arcturus

With default PSP FW loading

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn2.5: fix PSP FW loading for the second instance

ucodes for instances are from different location

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: catch amdgpu_irq_add_id failure

Do not ignore amdgpu_irq_add_id return value while registering
VMC page fault interrupt.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: cover the powerplay implementation details V3

This can save users much troubles. As they do not
actually need to care whether swSMU or traditional
powerplay routine should be used.

V2: apply the fixes to vi.c and cik.c also
V3: squash in oops fix

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Improve function get_sdma_rlc_reg_offset() (v2)

The SOC15_REG_OFFSET() macro needs to dereference adev->reg_offset[IP]
pointer, which is sometimes NULL when there are fewer than 8 sdma engines.
Avoid that by not initializing the array regardless.

v2: squash in warning fixes

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Use u64 divide macro for round up division

[why]
Fix compilation warnings on i386 architecture:
undefined reference to `__udivdi3'
[how]
Switch DIV_ROUND_UP to DIV64_U64_ROUND_UP

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.6-2020-01-10-dp-mst-dsc' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.6-2020-01-10-dp-mst-dsc:

drm:
- Add MST helper for PBN calculation of DSC modes
- Parse FEC caps on MST ports
- Add MST DPCD R/W functions
- Add MST helpers for virtual DPCD aux
- Add MST HUB quirk
- Add MST DSC enablement helpers

amdgpu:
- Enable MST DSC
- Add fair share algo for DSC bandwidth calcs
- Fix for 32 bit builds

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110214328.308549-1-alexander.deucher@amd.com

Merge tag 'amd-drm-next-5.6-2020-01-09' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.6-2020-01-09:

amdgpu:
- Enable DCN support on POWER
- Enable GFXOFF for Raven1 refresh
- Clean up MM engine idle handlers
- HDMI 2.0 audio fixes
- Fixes for some 10 bpc EDP panels
- Watermark fixes for renoir
- SR-IOV fixes
- Runtime pm robustness fixes
- Arcturus VCN fixes
- RAS fixes
- BACO fixes for Arcturus
- Stable pstate fixes for swSMU
- HDCP fixes
- PSP cleanup
- HDMI fixes
- Misc cleanups

amdkfd:
- Spread interrupt work across cores to reduce latency
- Topology fixes for APUs
- GPU reset improvements

UAPI:
- Enable DRIVER_SYNCOBJ_TIMELINE for vulkan
- Return better error values for kfd process ioctl

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109230338.8022-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2020-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:

Cross-subsystem Changes:
- Convert simple panel bindings to a template.

Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
  between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.

Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
  BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com

drm/amd/display: Fix compilation warnings on i386

[why]
Compilation error "undefined reference to `__udivdi3'" was
thrown on i386 architecture.

[how]
Use div_u64 for unsigned long division instead of a divide operator.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: fix documentation of drm_dp_mst_add_affected_dsc_crtcs

the parameter is the mst manager, not the port.

Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: protect new DSC code with CONFIG_DRM_AMD_DC_DCN

Otherwise we get undefined symbols.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: add dp helper to initialize remote aux channel.

[why]
We need to minimally initialize the remote aux channel, e.g. the
crc work struct of remote aux to dump the sink's DPRX CRCs in MST
setup.

[how]
Add helper that only initializes the crc work struct of the remote
aux, hooke crc work queue to 'drm_dp_aux_crc_work'. Then call this
helper in DP MST port initialization.
This, plus David Francis' patch [1], fix the issue of MST remote
aux DPCD CRCs read.

[1] https://patchwork.kernel.org/patch/11217941/

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger modesets on MST DSC connectors

Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.

Therefore, whenever a crtc has drm_atomic_crtc_needs_modeset,
for each crtc that shares a MST topology with that stream and
supports DSC, add that crtc (and all affected connectors and
planes) to the atomic state and set mode_changed on its state

v2: Do this check only on Navi and before adding connectors
and planes on modesetting crtcs

v3: Call the drm_dp_mst_add_affected_dsc_crtcs() to update
all affected CRTCs

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs

[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.

[how]
Adding helper to trigger modesets on MST DSC connectors
by setting mode_changed flag on CRTCs in the same topology
as affected connector

v2: use drm_dp_mst_dsc_aux_for_port function to verify
if the port is DSC capable

v3: - added _must_check attribute
    - removed topology manager check
    - fix typos and indentations

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Recalculate VCPI slots for new DSC connectors

[why]
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.

[how]
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it and calls drm_dp_helper_update_vcpi_slots_for_dsc to
update connector's VCPI slots.

v2: - use drm_dp_mst_atomic_enable_dsc per port to
enable/disable DSC

v3: - Iterate through connector states from the state passed
    - On each connector state get stream from dc_state,
instead CRTC state

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check return value of drm helper

If driver fails to update update VCPI allocation during
compute_mst_dsc_configs_for_state - fail the function
by return early.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: MST DSC compute fair share

If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network

Implement an algorithm to determine the correct DSC config
for each stream

The algorithm:
This
     [                   ]          ( )
represents the range of bandwidths possible for a given stream.
The [] area represents the range of DSC configs, and the ()
represents no DSC. The bandwidth used increases from left to right.

First, try disabling DSC on all streams
     [                  ]          (|)
     [                     ]            (|)
Check this against the bandwidth limits of the link and each branch
(including each endpoint). If it passes, the job is done

Second, try maximum DSC compression on all streams
that support DSC
     [|         ]        ( )
     [|                ]         ( )
If this does not pass, then enabling this combination of streams
is impossible

Otherwise, divide the remaining bandwidth evenly amongst the streams
     [        |  ]         ( )
     [        |      ]        ( )

If one or more of the streams reach minimum compression, evenly
divide the reamining bandwidth amongst the remaining streams
     [    |] ( )
     [       |]   ( )
     [                 |   ]               ( )
     [                 |      ]                  ( )

If all streams can reach minimum compression, disable compression
greedily
     [      |]  ( )
     [        |]    ( )
     [                 ]                                (|)

Perform this algorithm on each full update, on each MST link
with at least one DSC stream on it

After the configs are computed, call
dcn20_add_dsc_to_stream_resource on each stream with DSC enabled.
It is only after all streams are created that we can know which
of them will need DSC.

Do all of this at the end of amdgpu atomic check.  If it fails,
fail check; This combination of timings cannot be supported.

v2: Use drm_dp_mst_atomic_check to validate bw for certain dsc
configurations

v3: Use dc_dsc_policy structure to get min and max bpp rate
for DSC configuration

Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add PBN per slot calculation for DSC

[why]
Need to calculate VCPI slots differently for DSC
to take in account current link rate, link count
and FEC.
[how]
Add helper to get pbn_div from dc_link

Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Rename drm_dp_mst_atomic_check_topology_state

[why]
drm_dp_mst_atomic_check_topology_state() should be renamed
to reflect more specific type of check. Since it is verifying
payload allocation limit it should be renamed into
drm_dp_mst_atomic_check_vcpi_alloc_limit()

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add branch bandwidth validation to MST atomic check

[why]
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check after
drm_dp_mst_atomic_check_topology_state to fully verify that
the proposed topology is supported.

v2: Fixing some typos and indenting
v3: Return correct error enums if no bw space available

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add DSC enablement helpers to DRM

Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.

Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI slots is expected to be done
in encoder's atomic_check.

v2: squash separate functions into one and call it per
port
v3: Fix comment typos

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Manually overwrite PBN divider for calculating timeslots

[why]
For DSC case we cannot use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore the driver has to calculate its own divider based
on the link rate and lane count its handling, as it is hw specific.

[how]
Pass pbn_div as an argument, which is used if its more than
zero, otherwise default topology manager's pbn_div will be used.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Write DSC enable to MST DPCD

Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.

Use the cached dsc_aux field.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Validate DSC caps on MST endpoints

During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.

Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Initialize DSC PPS variables to 0

For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.

memset to 0 to avoid this

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add new quirk for Synaptics MST hubs

Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs.  Add a new quirk to detect this case.

v2: Fix error when checking return of drm_dp_read_desc

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add helpers for MST DSC and virtual DPCD aux

Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.

As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual DPCD
is a DP feature new in DP v1.4, which exposes certain DPCD
registers on virtual ports.

v2: Remember to unlock mutex on all paths
v3: Refactor to match coding style and increase brevity
v4: - Check DSC capable MST sink connected directly to the device.
    - Check branch's port_parent to be set

Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Fill branch->num_ports

This field on drm_dp_mst_branch was never filled

It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.

v2: remember to decrement on port removal
v3: don't explicitly init to 0
v4: move decrement of num_ports to unlink_port function

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Add MST support to DP DPCD R/W functions

Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.

This means that DRM drivers can make MST DPCD read/writes.

v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix calling wrong function on DPCD write
v5: delete deprecated include of drmP.h

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Parse FEC capability on MST ports

As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.

The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)

That value is needed for FEC and DSC support

Store it on drm_dp_mst_port

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>