Felix Fietkau [Sat, 18 Jul 2015 22:49:39 +0000 (22:49 +0000)]
kernel: fix sched_getaffinity on MIPS SMP systems (fixes enabling RPS/XPS in netifd with musl)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46420
John Crispin [Sat, 18 Jul 2015 21:15:42 +0000 (21:15 +0000)]
ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working
on these devices. This adds them to the calibration data loading introduced in
r46244 and thus makes 5GHz work again for these devices.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46415
John Crispin [Sat, 18 Jul 2015 21:15:36 +0000 (21:15 +0000)]
ar71xx: use automatic firmware partition splitting for devolo dLAN devices
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46414
Felix Fietkau [Sat, 18 Jul 2015 19:10:38 +0000 (19:10 +0000)]
cfg80211: fix a locking issue (#20098)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46413
Felix Fietkau [Sat, 18 Jul 2015 16:47:05 +0000 (16:47 +0000)]
ramips: enable mt76 by default for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46410
Felix Fietkau [Sat, 18 Jul 2015 16:04:58 +0000 (16:04 +0000)]
mt76: update to the latest version, fixes rx buffer allocation issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46409
Steven Barth [Sat, 18 Jul 2015 05:44:50 +0000 (05:44 +0000)]
odhcp6c: add option "sourcefilter" to disable source filter
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46408
Hauke Mehrtens [Fri, 17 Jul 2015 17:55:17 +0000 (17:55 +0000)]
kernel: fix dependecy of kmod-ieee802154_6lowpan
This module also depends on kmod-ieee802154
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46407
John Crispin [Fri, 17 Jul 2015 12:51:24 +0000 (12:51 +0000)]
swconfig: libsw.so should be installed into /usr/lib/
otherwise it's not picked up by toolchain:
staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_musl-1.1.10/lib/gcc/mipsel-openwrt-linux-musl/4.8.3/../../../../mipsel-openwrt-linux-musl/bin/ld: cannot find -lsw
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46406
John Crispin [Fri, 17 Jul 2015 12:51:08 +0000 (12:51 +0000)]
ramips: add support for Planex MZK-DP150N
This patch add support for Planex MZK-DP150N.
a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 46405
John Crispin [Fri, 17 Jul 2015 12:50:52 +0000 (12:50 +0000)]
brcm2708: add gzip image compression
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46404
John Crispin [Fri, 17 Jul 2015 12:49:27 +0000 (12:49 +0000)]
brcm2708: add Raspberry Pi Compute Module support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46403
John Crispin [Fri, 17 Jul 2015 12:49:09 +0000 (12:49 +0000)]
brcm2708: switch to linux 4.1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46402
John Crispin [Fri, 17 Jul 2015 12:48:59 +0000 (12:48 +0000)]
brcm2708: add upstream (bcm2835) modules and improve downstream ones (bcm2708)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46401
John Crispin [Fri, 17 Jul 2015 12:48:51 +0000 (12:48 +0000)]
generic: add missing linux 4.1 symbols
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46400
John Crispin [Fri, 17 Jul 2015 12:48:39 +0000 (12:48 +0000)]
brcm2708: add linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46399
John Crispin [Fri, 17 Jul 2015 12:48:11 +0000 (12:48 +0000)]
brcm2708: split target config into subtargets
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46398
John Crispin [Fri, 17 Jul 2015 12:48:02 +0000 (12:48 +0000)]
brcm2708: remove unneeded base-files
Device tree exports board name/model and device LEDs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46397
John Crispin [Fri, 17 Jul 2015 12:47:50 +0000 (12:47 +0000)]
brcm2708: improve profiles and image generation
- Add profiles for bcm2708 subtarget.
- Check subtarget for image generation.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46396
Jo-Philipp Wich [Fri, 17 Jul 2015 11:37:20 +0000 (11:37 +0000)]
toplevel.mk: fix LD_LIBRARY_PATH for host binaries
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46394
Steven Barth [Fri, 17 Jul 2015 11:09:13 +0000 (11:09 +0000)]
odhcpd: fix last commit
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46393
Steven Barth [Fri, 17 Jul 2015 08:47:48 +0000 (08:47 +0000)]
odhcpd: fix dhcpv6 relay forwarding
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46392
Jonas Gorski [Thu, 16 Jul 2015 11:15:02 +0000 (11:15 +0000)]
brcm63xx: make use of dt-includes
Now that we have a dtc command that invokes the preprocessor, make use
of it and replace the magic numbers with KEY_* defines.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46391
Jonas Gorski [Thu, 16 Jul 2015 11:13:47 +0000 (11:13 +0000)]
brcm63xx: make use of the new BuildDTB command
Now that we have a BuildDTB command, make use of it instead of calling
dtc directly.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46390
Jonas Gorski [Thu, 16 Jul 2015 11:12:52 +0000 (11:12 +0000)]
image.mk: add a BuildDTB define
Add a Image/BuildDTB command that takes the path to an dts file and
applies the CPP using the default include directories, then uses dtc
to compile the dts as the specified output file.
Additional CPP and DTC flags can be supplied as additional arguments.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46389
Jonas Gorski [Thu, 16 Jul 2015 11:12:41 +0000 (11:12 +0000)]
brcm63xx: HG553 buttons support
This patch adds buttons support for Huawei EchoLife HG553.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46388
Jonas Gorski [Thu, 16 Jul 2015 11:12:03 +0000 (11:12 +0000)]
kernel: wpan: at86rf230 depends on regmap-spi
kmod-at86rf230 select REGMAP_SPI since 3.17, so add a dependency to
kmod-regmap.
Fixes the following error:
Package kmod-at86rf230 is missing dependencies for the following libraries:
regmap-core.ko
regmap-spi.ko
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46387
Jonas Gorski [Wed, 15 Jul 2015 14:42:04 +0000 (14:42 +0000)]
brcm63xx: switch to 4.1
Switch brcm63xx to 4.1 to give it some initial testing, but keep 3.18
at least until CC-final is out.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46386
Jonas Gorski [Wed, 15 Jul 2015 14:41:45 +0000 (14:41 +0000)]
xtables-addons: update to 2.7 to fix compilation with 4.1
Also drop the configure (not .ac) patch part as autoreconf will
overwrite it anyway with a newly generated version.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46385
Luka Perkov [Wed, 15 Jul 2015 08:23:28 +0000 (08:23 +0000)]
rpcd: update to the latest version
This update adds a couple of file plugin enhancements, such as base64 support
and setting mode when files are written.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 46384
Felix Fietkau [Wed, 15 Jul 2015 08:17:49 +0000 (08:17 +0000)]
scripts/ipkg-build: fix a build regression introduced in r46360 (fixes #20082)
go to the $TOPDIR directory before trying to extract a git/svn timestamp
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46383
Felix Fietkau [Wed, 15 Jul 2015 08:17:42 +0000 (08:17 +0000)]
ar8216: add swconfig attributes for ARL table flushing
Add swconfig attributes for flushing the ARL table globally or per port.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 46382
Felix Fietkau [Wed, 15 Jul 2015 08:17:36 +0000 (08:17 +0000)]
ar8216: adjust ATU flushing in case of link changes
If a link goes down, don't flush the complete ARL table.
Only flush the entries for the respective port.
Don't touch ARL table if a link goes up.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 46381
Felix Fietkau [Wed, 15 Jul 2015 08:17:28 +0000 (08:17 +0000)]
ar8216: add ARL table flushing per port
Adds functions for flushing ARL table entries per port.
Successfully tested on AR8327. Implementation for AR8216/AR8236/AR8316
is based on the AR8236 datasheet and assumes that the three chips
share a common ATU register layout.
Compile-tested only for AR8216/AR8236/AR8316.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 46380
Felix Fietkau [Wed, 15 Jul 2015 08:17:23 +0000 (08:17 +0000)]
ar8216: add reading ARL table for AR8216/AR8236/AR8316
Adds the chip-specific part of reading ARL table for AR8216/AR8236/AR8316.
It's based on the AR8236 datasheet and compile-tested only as I couldn't
find datasheets for AR8216/AR8316 and don't own devices with these chips.
The existing ar8216_atu_flush implementation was used for all three
chip types, therefore I guess they share a common ATU register layout.
More testing would be appreciated.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 46379
Felix Fietkau [Wed, 15 Jul 2015 08:16:40 +0000 (08:16 +0000)]
tools/e2fsprogs: add a darwin-compat patch
On darwin we need to import stdint to get these integer typedefs.
Patch by: Lawrence D'Anna <larry@elder-gods.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46378
Felix Fietkau [Wed, 15 Jul 2015 08:16:22 +0000 (08:16 +0000)]
wpa-supplicant: add 802.11r client support
Add 802.11r client support to wpa_supplicant. It's only enabled in
wpa_supplicant-full. hostapd gained 802.11r support in commit r45051.
Tested on a TP-Link TL-WR710N sta psk client with two 802.11r enabled
openwrt accesspoints (TP-Link TL-WDR3600).
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 46377
Steven Barth [Wed, 15 Jul 2015 07:38:54 +0000 (07:38 +0000)]
odhcpd: also unify router and DNS lifetimes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46376
Steven Barth [Wed, 15 Jul 2015 06:57:43 +0000 (06:57 +0000)]
odhcpd: fix RA lifetime calculation
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46375
Jo-Philipp Wich [Tue, 14 Jul 2015 22:27:39 +0000 (22:27 +0000)]
scripts/feeds: return error status from feed update
This patch is a modified version of the patch being discussed at here:
https://patchwork.ozlabs.org/patch/471303/
from Martin Strbacka <martin.strbacka@nic.cz>
My version modifies scripts/feeds so that an error with one of the feeds just
raises the error flag, but script continues and tries to update the other
feeds. After all feeds have been updated, the script returns 1 if at least
one feed failed, and 0 on success with all feeds. The user can then utilise
the status in his build script, if he wants.
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 46374
Hauke Mehrtens [Tue, 14 Jul 2015 20:56:04 +0000 (20:56 +0000)]
robocfg: remove robocfg
This controls the old Broadcom switch driver which was removed over a
year ago, since then this is useless. Use swconfig instead it works
with more (Broadcom) switches.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46373
Hauke Mehrtens [Tue, 14 Jul 2015 20:52:18 +0000 (20:52 +0000)]
adm5120: do not config something as module
All modules should be build by a package and only selected by such a
package. Remove all the config options selected as module and also
refresh the config.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46372
Hauke Mehrtens [Tue, 14 Jul 2015 20:51:37 +0000 (20:51 +0000)]
admswconfig: fix compile with musl
caddr_t is not defined everywhere any more, cast it the the real
pointer type of ifr_data.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46371
Steven Barth [Tue, 14 Jul 2015 20:10:46 +0000 (20:10 +0000)]
odhcpd: use 65535s as default lifetime and make interval configurable
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46370
Hauke Mehrtens [Tue, 14 Jul 2015 18:51:23 +0000 (18:51 +0000)]
bcm53xx: fix usb3 build with kernel 4.1
One argument was removed with kernel 4.1 from xhci_handshake() which
caused a compile error.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46369
Jo-Philipp Wich [Tue, 14 Jul 2015 17:23:56 +0000 (17:23 +0000)]
linux: enable kmod-acpi-button for x86_64 (#20080)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46368
John Crispin [Tue, 14 Jul 2015 16:24:10 +0000 (16:24 +0000)]
brcm2708: partially revert r46347 to fix sysupgrade
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46367
John Crispin [Tue, 14 Jul 2015 16:24:02 +0000 (16:24 +0000)]
x86: add kmod-acpi-button and kmod-button-hotplug to default packages
Since r40909 openwrt can automatically shutdown when you press the
power button or try to shutdown a kvm virtual machine.
When booting a recent CC-rc2 or trunk image, it doesn't work,
as two kernel modules are missing.
Add these two kernel modules to the default packages, so users
don't need to install them manually.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 46366
Felix Fietkau [Tue, 14 Jul 2015 10:30:38 +0000 (10:30 +0000)]
ccache: Make ccache aware of OpenWRT provided GCC patch.
The OpenWRT GCC patch, 910-mbsd_multi.patch adds an extra option
to gcc that depends on an environment variable. Standard ccache
is unaware of this option and therefor can produce stdout from gcc
that doesn't correspond to what you would get if you actually
do a direct compilation with gcc.
This commit adds a patch to ccache to make it aware of the new
option and removes the feature from the ccache package to use the
host system's installed ccache binary.
Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
SVN-Revision: 46364
Rafał Miłecki [Tue, 14 Jul 2015 10:25:46 +0000 (10:25 +0000)]
bcm53xx: add early support for Netgear R7000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46363
John Crispin [Tue, 14 Jul 2015 09:57:52 +0000 (09:57 +0000)]
scripts: fix 64bit uclibc external toolchain detection
according to gcc, UCLIBC_DYNAMIC_LINKER64
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46362
John Crispin [Tue, 14 Jul 2015 09:57:45 +0000 (09:57 +0000)]
build: Prevent more gzip timestamps
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 46361
John Crispin [Tue, 14 Jul 2015 09:57:19 +0000 (09:57 +0000)]
ipkg-build: use deterministic timestamps in ipk tarballs
As a follow-up to r46026, this commit sets the modification
times of files inside the tarballs to deterministic values.
It uses the date of the last git or svn commit and falls
back to the old behavior if those are not available.
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 46360
John Crispin [Tue, 14 Jul 2015 09:57:08 +0000 (09:57 +0000)]
ramips: added gpio spi refclk support for wrtnode board
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46359
John Crispin [Tue, 14 Jul 2015 09:56:59 +0000 (09:56 +0000)]
swconfig: Split libsw out of swconfig for reuse in other packages
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 46358
Steven Barth [Tue, 14 Jul 2015 09:12:29 +0000 (09:12 +0000)]
odhcpd: unsolicited unicast RAs + fix NDP-relay
odhcpd now sends unsolicited RAs also via unicast to known link-local
neighbors. This is an attempt to work-around common smartphone issues
https://code.google.com/p/android/issues/detail?id=32662
Also NDP-relay should now work more reliably now
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46357
John Crispin [Tue, 14 Jul 2015 07:44:14 +0000 (07:44 +0000)]
ubox: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46356
John Crispin [Tue, 14 Jul 2015 07:43:50 +0000 (07:43 +0000)]
toolchain: fix gcc 4.6 build with gcc5
build error:
cfns.gperf:101:1: error: 'gnu_inline' attribute present on 'libc_name_p'
cfns.gperf:26:14: error: but not here
observed on Arch Linux
affected versions gcc 4.6, gcc 4.7
reported & fixed in DragonFlyBSD issue #136
https://github.com/DragonFlyBSD/DPorts/issues/136
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46355
John Crispin [Tue, 14 Jul 2015 07:43:33 +0000 (07:43 +0000)]
gemini: switch to 4.1
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46354
John Crispin [Tue, 14 Jul 2015 07:43:10 +0000 (07:43 +0000)]
gemini: add 4.1 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46353
John Crispin [Tue, 14 Jul 2015 07:42:18 +0000 (07:42 +0000)]
gemini: add NAS packages to Raidsonic profile
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46352
John Crispin [Tue, 14 Jul 2015 07:41:43 +0000 (07:41 +0000)]
gemini: copy kernel image to BIN_DIR
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46351
John Crispin [Tue, 14 Jul 2015 07:41:19 +0000 (07:41 +0000)]
ramips: added led support for wrtnode board
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46350
John Crispin [Tue, 14 Jul 2015 07:40:22 +0000 (07:40 +0000)]
ramips: adding support for OY-0001 Wireless Router
Adding support for OY-0001 Wireless Router.
OY-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Signed-off-by: Tom Deng <2579131212@qq.com>
SVN-Revision: 46349
John Crispin [Tue, 14 Jul 2015 07:39:19 +0000 (07:39 +0000)]
ramips: mt7620 ArcherC20i USB support
USB port of TP-Link Archer C20i does not work with trunk and CC.
This patch adds two nodes (ehci and ohci) to the device tree enabling USB.
Signed-off-by: Gunnar Thorburn <gunnar@thorburn.se>
SVN-Revision: 46348
John Crispin [Tue, 14 Jul 2015 07:39:10 +0000 (07:39 +0000)]
brcm2708: Implement sysupgrade
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.
Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 46347
John Crispin [Tue, 14 Jul 2015 07:38:47 +0000 (07:38 +0000)]
kernel: fix build with CONFIG_MTD unset
Fixed typo in the patch provided by Hauke:
https://lists.openwrt.org/pipermail/openwrt-devel/2015-July/034274.html
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46346
John Crispin [Tue, 14 Jul 2015 07:38:33 +0000 (07:38 +0000)]
generic: add missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46345
John Crispin [Tue, 14 Jul 2015 07:37:29 +0000 (07:37 +0000)]
brcm2708: add DT support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46344
John Crispin [Tue, 14 Jul 2015 07:37:14 +0000 (07:37 +0000)]
brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46343
John Crispin [Tue, 14 Jul 2015 07:37:03 +0000 (07:37 +0000)]
ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46342
John Crispin [Tue, 14 Jul 2015 07:35:59 +0000 (07:35 +0000)]
base-files: added option to configure the gpio led trigger in uci-defaults
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46341
John Crispin [Tue, 14 Jul 2015 07:35:45 +0000 (07:35 +0000)]
mac80211: make ath10k firmware v2 selectable
Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing (at least on a QCA9880-BR4A-R) and
this provides the option to select an older version instead.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46340
John Crispin [Tue, 14 Jul 2015 07:34:31 +0000 (07:34 +0000)]
ar71xx: add support to use gpio irqs
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46339
John Crispin [Tue, 14 Jul 2015 07:32:33 +0000 (07:32 +0000)]
ar71xx: add support for the devolo dLAN pro 500 Wireless+
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46338
Steven Barth [Mon, 13 Jul 2015 21:51:38 +0000 (21:51 +0000)]
odhcp6c: fix some more compatibility issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46335
Steven Barth [Mon, 13 Jul 2015 14:17:38 +0000 (14:17 +0000)]
odhcp6c: work-around more ISP DHCPv6-PD issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46317
Hauke Mehrtens [Sun, 12 Jul 2015 19:26:48 +0000 (19:26 +0000)]
x86: Make virtualization guests built for pentium4 with SMP
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 46314
Felix Fietkau [Sun, 12 Jul 2015 18:54:30 +0000 (18:54 +0000)]
gcc: use the -sf suffix for musl ldso on powerpc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46313
Hauke Mehrtens [Sun, 12 Jul 2015 13:47:16 +0000 (13:47 +0000)]
kernel: refresh patches on linux 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46308
Hauke Mehrtens [Sun, 12 Jul 2015 12:14:02 +0000 (12:14 +0000)]
sunxi: enable CONFIG_EXPERT
- only sunxi has this disabled
- unify kernel configuration across platforms
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46307
Jonas Gorski [Sun, 12 Jul 2015 11:57:40 +0000 (11:57 +0000)]
ar7-atm: fix compilation for 4.1
Add the required changes to make it compile for 4.1 again.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46306
Jonas Gorski [Sun, 12 Jul 2015 11:57:04 +0000 (11:57 +0000)]
acx-mac80211: make it compile again against new compat-wireless
Update to "latest" HEAD and update it to match latest API changes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46305
Hauke Mehrtens [Sun, 12 Jul 2015 10:51:28 +0000 (10:51 +0000)]
kernel: add missing config option
This should fix build of sunxi.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46304
Hauke Mehrtens [Sun, 12 Jul 2015 10:38:54 +0000 (10:38 +0000)]
mvebu: make patches apply against 3.18.18 again
commit r46299 broke the mvebu target because one patch does not apply
any more. This commit closes #20070.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46303
Hauke Mehrtens [Sat, 11 Jul 2015 20:55:36 +0000 (20:55 +0000)]
valgrind: update to 3.10.1 and fix kernel >= 4.0
This updates valgrind to version 3.10.1 and make configure work with
kernel version > 4.0. This patch was taken from upstream valgrind.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46302
Hauke Mehrtens [Sat, 11 Jul 2015 19:59:26 +0000 (19:59 +0000)]
kernel: update 4.1 to 4.1.2
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.2
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46301
Hauke Mehrtens [Sat, 11 Jul 2015 19:59:05 +0000 (19:59 +0000)]
kernel: update 4.0 to 4.0.8
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.8
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46300
Hauke Mehrtens [Sat, 11 Jul 2015 19:58:44 +0000 (19:58 +0000)]
kernel: update 3.18 to 3.18.18
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46299
Felix Fietkau [Fri, 10 Jul 2015 19:42:12 +0000 (19:42 +0000)]
toolchain/gdb: use expat library to be able to parse target machine definitions
Fixes gdbserver debugging with at least mvebu, possibly others
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46298
Felix Fietkau [Fri, 10 Jul 2015 19:42:05 +0000 (19:42 +0000)]
tools: add expat library (to be used by gdb)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46297
Felix Fietkau [Fri, 10 Jul 2015 19:42:00 +0000 (19:42 +0000)]
toolchain/gdb: update to 7.8, sync with target package version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46296
Felix Fietkau [Fri, 10 Jul 2015 19:41:48 +0000 (19:41 +0000)]
ramips: collect rx related members to fe_rx_ring struct
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 46295
Felix Fietkau [Fri, 10 Jul 2015 19:41:42 +0000 (19:41 +0000)]
ramips: add xmit_more support
use pktgen to verify on rt3662. can improve transmit rate.
pkt_size 1500
burst 1 : 807Mb/sec
burst 8 : 984Mb/sec
pkt_size 60
burst 1 : 57Mb/sec
burst 8 : 236Mb/sec
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 46294
Felix Fietkau [Fri, 10 Jul 2015 11:36:49 +0000 (11:36 +0000)]
ebtables: fix miscompilation on 64bit targets
The musl build "fix" introduced in r45108 removed all netinet/ether.h
includes, which made the prototypes of ether_aton and ether_ntoa
unavailable. As a result, the compiler assumed they return int instead
of a pointer. This currupted the pointer on 64bit targets, causing ebtables
to segfault in commands containing MAC addresses.
Since r46161 made it possible to include both the kernel and the libc
if_ether.h as long as the libc version is included first, this patch
changes the fix to remove the linux/if_ether.h from the ebtables source
(so the fixed version from the kernel is used) and ensures netinet/ether.h
is included early.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46292
Rafał Miłecki [Thu, 9 Jul 2015 18:03:39 +0000 (18:03 +0000)]
mac80211: add brcmfmac patch fixing user space picked MACs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46288
Jo-Philipp Wich [Thu, 9 Jul 2015 13:04:27 +0000 (13:04 +0000)]
openssl: update to v1.0.2d (CVE-2015-1793)
During certificate verification, OpenSSL (starting from version 1.0.1n and
1.0.2b) will attempt to find an alternative certificate chain if the first
attempt to build such a chain fails. An error in the implementation of this
logic can mean that an attacker could cause certain checks on untrusted
certificates to be bypassed, such as the CA flag, enabling them to use a valid
leaf certificate to act as a CA and "issue" an invalid certificate.
This issue will impact any application that verifies certificates including
SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46285
John Crispin [Thu, 9 Jul 2015 07:04:14 +0000 (07:04 +0000)]
ar71xx: compex wpe72 add space to include statement
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46284
John Crispin [Thu, 9 Jul 2015 07:03:54 +0000 (07:03 +0000)]
ar71xx: compex wpj531 register usb support
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46283
John Crispin [Thu, 9 Jul 2015 07:01:55 +0000 (07:01 +0000)]
ar71xx: compex wpj531 fix setting mac address on ethernet
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46282
projects / openwrt / svn-archive / archive.git / log