Felix Fietkau [Mon, 1 Feb 2016 13:33:33 +0000 (13:33 +0000)]
scripts/strip-kmod.sh: remove a few extra sections to slightly reduce kernel module size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48608
Rafał Miłecki [Mon, 1 Feb 2016 12:54:17 +0000 (12:54 +0000)]
bcm53xx: fix bcma-hcd compilation in kernel 4.4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48607
Rafał Miłecki [Mon, 1 Feb 2016 12:43:04 +0000 (12:43 +0000)]
bcm53xx: build D-Link DIR-885L image
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48606
Rafał Miłecki [Mon, 1 Feb 2016 12:42:51 +0000 (12:42 +0000)]
bcm53xx: change brcmnand behavior for ECC strength 1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48605
Rafał Miłecki [Mon, 1 Feb 2016 12:42:42 +0000 (12:42 +0000)]
bcm53xx: fix NAND parameters on DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48604
Rafał Miłecki [Mon, 1 Feb 2016 12:42:23 +0000 (12:42 +0000)]
bcm53xx: add brcmnand patch reading flash parameters
It's useful for adding support for new hardware.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48603
Rafał Miłecki [Mon, 1 Feb 2016 12:42:07 +0000 (12:42 +0000)]
bcm53xx: include (build) Seama mtdsplit parser
It's needed for devices using Seama like D-Link DIR-885L.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48602
Rafał Miłecki [Mon, 1 Feb 2016 12:42:00 +0000 (12:42 +0000)]
firmware-utils: add oseama tool for creating Seama entities
It has an important feature (compared to seama) of using multiple input
files, aligning them and padding zeroes until reaching a specified
absolute offset. This is needed for a proper flash layout on NAND. We
want kernel partition to be big enough to handle future updates without
a need to resize it and wipe whole "ubi" partition. It's important as
we don't want to lose block counters.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48601
Rafał Miłecki [Mon, 1 Feb 2016 12:41:53 +0000 (12:41 +0000)]
kernel: mtdsplit: support Seama entity with UBI
Some D-Link routers (e.g. DIR-885L) have NAND and use Seama format. It
means OpenWrt will want to have UBI in Sseama entity and should be able
to detect it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48600
Rafał Miłecki [Mon, 1 Feb 2016 12:41:47 +0000 (12:41 +0000)]
kernel: mtdsplit: detect UBI partition when looking for rootfs
This allows mtdsplit parsers work with UBI which is very popular on
NAND flases.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48599
Rafał Miłecki [Mon, 1 Feb 2016 12:41:41 +0000 (12:41 +0000)]
kernel: mtdsplit: modify rootfs helpers to provide partition type
Our mtdsplit parsers may want to create partition with name choice based
on partition file system (e.g. SquashFS vs. JFFS2). This patch allows
passing extra argument pointing to variable that will be set properly.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48598
Felix Fietkau [Mon, 1 Feb 2016 12:31:04 +0000 (12:31 +0000)]
mt76: update to the latest version, fixes tx status information polling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48597
Felix Fietkau [Mon, 1 Feb 2016 12:02:11 +0000 (12:02 +0000)]
gre: Support multicast configurable gre interfaces
UCI paramater multicast is added which allows to toggle multicast support on gre interfaces.
By default multicast support is enabled as gre tunnels are often used in combination with
routing protocols using multicast.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Nick Podolak <nicholas.podolak@dtechlabs.com>
SVN-Revision: 48596
Felix Fietkau [Mon, 1 Feb 2016 12:02:05 +0000 (12:02 +0000)]
netifd: update to the latest version, adds many fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48595
Jo-Philipp Wich [Mon, 1 Feb 2016 10:43:27 +0000 (10:43 +0000)]
scripts: fix GNU data invocation
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48594
Felix Fietkau [Mon, 1 Feb 2016 10:33:25 +0000 (10:33 +0000)]
scripts/get_source_date_epoch.sh: for SVN use a variant that is compatible with older versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48593
Felix Fietkau [Mon, 1 Feb 2016 10:33:15 +0000 (10:33 +0000)]
scripts/portable_date.sh: fix parsing of date strings on non-GNU systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48592
Florian Fainelli [Mon, 1 Feb 2016 01:06:56 +0000 (01:06 +0000)]
kernel: set root on NFS when enabled
Replace the configured root device with a NFS root device and automatic
IP configuration for booting over NFS.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 48591
Florian Fainelli [Mon, 1 Feb 2016 01:06:39 +0000 (01:06 +0000)]
buildroot: add options to build the kernel for NFS boot
Add the basic set of kernel options to allow it from mounting a NFS root
and boot from it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 48590
Felix Fietkau [Sun, 31 Jan 2016 23:29:41 +0000 (23:29 +0000)]
ar71xx/image: use SOURCE_DATE_EPOCH for mksquashfs-lzma
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 48589
Felix Fietkau [Sun, 31 Jan 2016 23:29:31 +0000 (23:29 +0000)]
include/image: use SOURCE_DATE_EPOCH if set for squashfs + ext4 images
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 48588
Felix Fietkau [Sun, 31 Jan 2016 23:29:22 +0000 (23:29 +0000)]
include/image: don't save gzip name/timestamp metadata
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
SVN-Revision: 48587
Felix Fietkau [Sun, 31 Jan 2016 23:29:16 +0000 (23:29 +0000)]
build system: have tar use $SOURCE_DATE_EPOCH for --mtime
The --mtime argument to 'tar' sets the modification time for all files within
the archive, which determines the timestamp files will get when they are
extracted. In this case, rootfs and other tarballs will get mtimes which
correspond to the last commit timestamp of the build system, as reported by
git/subversion.
This is a step towards reproducible image builds.
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48586
Felix Fietkau [Sun, 31 Jan 2016 23:29:12 +0000 (23:29 +0000)]
package/Makefile: override opkg installation time when SOURCE_DATE_EPOCH set
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48585
Felix Fietkau [Sun, 31 Jan 2016 23:29:07 +0000 (23:29 +0000)]
build: introduce SOURCE_DATE_EPOCH variable
SOURCE_DATE_EPOCH is the date of the last modified file using git/svn
as date source.
See https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48584
Felix Fietkau [Sun, 31 Jan 2016 23:28:55 +0000 (23:28 +0000)]
add scripts/portable_date: wrapper around date for bsd/linux
date -r $unix_timestamp on bsd is equal to date -d @$unix_timestamp on
linux. To support reproducible builds and not loosing every timestamp
it's required to convert a unix timestamp into human readable timestamp
./scripts/portable_date $unix_timstamp +%T
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 48583
Felix Fietkau [Sun, 31 Jan 2016 16:13:23 +0000 (16:13 +0000)]
mac80211: backport skb_free_frag and napi_alloc_frag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48582
Felix Fietkau [Sun, 31 Jan 2016 12:35:33 +0000 (12:35 +0000)]
cns3xxx: enable CONFIG_PROC_STRIPPED to improve network performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48581
Felix Fietkau [Sun, 31 Jan 2016 12:35:20 +0000 (12:35 +0000)]
cns3xxx: improve ethernet performance by using the page fragment allocation API
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48580
Felix Fietkau [Sun, 31 Jan 2016 12:35:07 +0000 (12:35 +0000)]
cns3xxx: fix ethernet DMA ring allocation issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48579
Felix Fietkau [Sun, 31 Jan 2016 12:29:34 +0000 (12:29 +0000)]
ar71xx: use page fragment API in the ethernet driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48578
Felix Fietkau [Sun, 31 Jan 2016 00:55:05 +0000 (00:55 +0000)]
musl: fix an alignment issue that was breaking ldso on ARMv5
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48577
Felix Fietkau [Sun, 31 Jan 2016 00:54:53 +0000 (00:54 +0000)]
ixp4xx: fix initramfs builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48576
Felix Fietkau [Sat, 30 Jan 2016 20:15:16 +0000 (20:15 +0000)]
musl: fix GDB debugging on mips (local, remote)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48575
Felix Fietkau [Sat, 30 Jan 2016 20:15:11 +0000 (20:15 +0000)]
musl: update to the latest git version, fixes TLS issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48574
Felix Fietkau [Sat, 30 Jan 2016 20:14:59 +0000 (20:14 +0000)]
perf: include asm/unistd.h instead of syscall.h to fix conflict with kernel headers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48573
Rafał Miłecki [Sat, 30 Jan 2016 16:57:35 +0000 (16:57 +0000)]
bcm53xx: support Netgear R8500 in sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48572
Rafał Miłecki [Sat, 30 Jan 2016 16:56:50 +0000 (16:56 +0000)]
bcm53xx: use proper CPU port in b53 for Netgear R8500
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48571
Rafał Miłecki [Sat, 30 Jan 2016 13:35:31 +0000 (13:35 +0000)]
kernel: support bgmac on BCM47094
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48564
Felix Fietkau [Sat, 30 Jan 2016 13:19:53 +0000 (13:19 +0000)]
ar71xx: add support for linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48563
Felix Fietkau [Sat, 30 Jan 2016 13:19:37 +0000 (13:19 +0000)]
ar71xx: fix a few include errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48562
Zoltan Herpai [Sat, 30 Jan 2016 12:13:21 +0000 (12:13 +0000)]
mxs: bump to 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 48561
Zoltan Herpai [Sat, 30 Jan 2016 12:12:57 +0000 (12:12 +0000)]
mxs: enable regulator in 4.4 config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 48560
Zoltan Herpai [Sat, 30 Jan 2016 12:05:49 +0000 (12:05 +0000)]
mxs: forward-port regulator patches into 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 48559
Felix Fietkau [Fri, 29 Jan 2016 23:19:41 +0000 (23:19 +0000)]
octeon: get rid of /lib/functions/octeon.sh hackery, use sysinfo directly
Fixes sysupgrade
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48558
Felix Fietkau [Fri, 29 Jan 2016 23:19:36 +0000 (23:19 +0000)]
octeon: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48557
Felix Fietkau [Fri, 29 Jan 2016 23:19:31 +0000 (23:19 +0000)]
glibc: switch to downloading version 2.22 via tarball instead of git to improve mirror support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48556
Felix Fietkau [Fri, 29 Jan 2016 23:19:26 +0000 (23:19 +0000)]
glibc: switch to version 2.22 by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48555
Felix Fietkau [Fri, 29 Jan 2016 23:19:19 +0000 (23:19 +0000)]
toolchain: fix default toolchain selection for mips64 added in r47355
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48554
Rafał Miłecki [Fri, 29 Jan 2016 22:31:43 +0000 (22:31 +0000)]
bcm53xx: specify magic expected in sysupgrade for D-Link DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48553
Rafał Miłecki [Fri, 29 Jan 2016 22:21:45 +0000 (22:21 +0000)]
oseama: support creating single Seama entity
This will be needed to handle sysupgrade on NAND in a smart way. We'll
need to extract kernel our of provided Seama container, put in in a new
Seama entity and flash.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48552
Jo-Philipp Wich [Fri, 29 Jan 2016 17:26:41 +0000 (17:26 +0000)]
firewall: drop invalid by default, remove chain indirection, fix invert flags (#21738)
* Enable drop_invalid by default to catch unnatted packets (#21738)
* Fix processing of inversions for -i, -o, -s, -d and -p flags
* Remove delegate_* chain indirection but rely on xt_id to identify own rules
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48551
Felix Fietkau [Fri, 29 Jan 2016 14:23:23 +0000 (14:23 +0000)]
mac80211: fix an out of bounds access issue in minstrel_ht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48550
Felix Fietkau [Fri, 29 Jan 2016 00:42:50 +0000 (00:42 +0000)]
lantiq: Make the ar9.dtsi sram node match "simple-bus"
All other SoC types are using "lantiq,sram" and "simple-bus" to ensure
that all child nodes are set up correctly during linux kernel
initialization (plat_of_setup(void) in arch/mips/lantiq/prom.c). Without
this some of sram child nodes might not be parsed.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48548
Felix Fietkau [Fri, 29 Jan 2016 00:42:45 +0000 (00:42 +0000)]
lantiq: Move the definition of the xrx200-net node to vr9.dtsi
This removes a lot of duplicate register and interrupt definitions by
moving the xrx200-net definition to vr9.dtsi and making all devices re-
use it.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48547
Felix Fietkau [Fri, 29 Jan 2016 00:42:38 +0000 (00:42 +0000)]
lantiq: fix PHY state handling issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48546
Felix Fietkau [Fri, 29 Jan 2016 00:38:49 +0000 (00:38 +0000)]
kernel: remove .config.prev when running make kernel_*config to fix rebuild errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48545
Rafał Miłecki [Thu, 28 Jan 2016 22:58:54 +0000 (22:58 +0000)]
linux-firmware: update to the commit from 2016-01-25
This adds e.g. BCM4350 rev 5 and BCM4366 firmwares (not packaged yet).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48544
Felix Fietkau [Thu, 28 Jan 2016 22:42:49 +0000 (22:42 +0000)]
malta: move to 4.4 kernel
Linux now has device tree support for malta. The patch for correcting
/proc/iomem content is not needed now. Previously it was
root@(none):/# cat /proc/iomem
00000000-
00000fff : reserved
00001000-
000effff : System RAM
000f0000-
000fffff : reserved
00100000-
0fffefff : System RAM
00100000-
003f2b6b : Kernel code
003f2b6c-
00485937 : Kernel data
...
Now it's
root@OpenWrt:/# cat /proc/iomem
00000000-
0fffefff : System RAM
00100000-
004a3297 : Kernel code
004a3298-
0057cfff : Kernel data
...
The kernel config was prepared as follows
1. cp target/linux/malta/config-{3.18,4.4}
2. make kernel_menuconfig CONFIG_TARGET=subtarget_platform
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 48543
Felix Fietkau [Thu, 28 Jan 2016 22:42:44 +0000 (22:42 +0000)]
tools/mkimage: backport SOURCE_DATE_EPOCH for reproducible builds
This pulls in Paul Kocialkowski's SOURCE_DATE_EPOCH support patch for u-boot,
which landed upstream circa July 2015. Note that this "host" u-boot repo is
only used to compile the 'mkimage' utility, and isn't used to actually compile
a bootloader for any target.
This patch could be removed if/when the host u-boot package is updated to a
contemporary version (but there doesn't seem to be any motivation/need to do
so).
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix portability error, refresh patches]
SVN-Revision: 48542
Felix Fietkau [Thu, 28 Jan 2016 22:42:34 +0000 (22:42 +0000)]
include/kernel: add custom USER/DOMAIN config options
These allow the generated kernel's build metadata to be defined explicitly.
This metadata is reported, eg, at boot time and in `uname -a` on running
systems. If the variables aren't configured, the current build system username
and hostname are used as normal.
The motivation for this option is to achive reproducible (bit-for-bit
identical) kernel builds of official openwrt releases.
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48541
Felix Fietkau [Thu, 28 Jan 2016 22:42:29 +0000 (22:42 +0000)]
include/kernel: sort module lists for reproducibility
This is to get reproducible builds of, eg, the kmod-sched ipkg.
Locale preferences can change build order, but the locale is already been
defined for the entire build process, so it doesn't need to be specified here.
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
SVN-Revision: 48540
Felix Fietkau [Thu, 28 Jan 2016 22:42:25 +0000 (22:42 +0000)]
busybox: disable timestamp in version
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 48539
Felix Fietkau [Thu, 28 Jan 2016 22:42:18 +0000 (22:42 +0000)]
Makefile: set timezone to UTC
This is necessary for reproducible image builds.
Signed-off-by: bryan newbold <bnewbold@robocracy.org>
SVN-Revision: 48538
Felix Fietkau [Thu, 28 Jan 2016 22:42:14 +0000 (22:42 +0000)]
hostapd: remove useless TLS provider selection override for wpad-mesh/wpa_supplicant-mesh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48537
Felix Fietkau [Thu, 28 Jan 2016 22:42:10 +0000 (22:42 +0000)]
mac80211: merge a bunch of pending fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48536
Rafał Miłecki [Thu, 28 Jan 2016 22:38:37 +0000 (22:38 +0000)]
bcm53xx: basic support for Seama format in sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48535
Rafał Miłecki [Thu, 28 Jan 2016 22:38:30 +0000 (22:38 +0000)]
mtd: allow writing Seama files to "firmware" on Broadcom targets
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48534
Rafał Miłecki [Thu, 28 Jan 2016 22:38:23 +0000 (22:38 +0000)]
oseama: small util for reading Seama image format info
It's similar to otrx, we need this tool for handling sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48533
Felix Fietkau [Thu, 28 Jan 2016 18:20:06 +0000 (18:20 +0000)]
openssl: update to 1.0.2f (fixes CVE-2016-0701, CVE-2015-3197)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48531
Felix Fietkau [Thu, 28 Jan 2016 18:19:59 +0000 (18:19 +0000)]
x86: remove redundant default network config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48530
Felix Fietkau [Thu, 28 Jan 2016 17:20:10 +0000 (17:20 +0000)]
hostapd: fix mesh interface bridge handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48529
Felix Fietkau [Thu, 28 Jan 2016 17:19:48 +0000 (17:19 +0000)]
hostapd: fix wpad-mesh and wpa-supplicant-mesh configuration issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48528
Felix Fietkau [Thu, 28 Jan 2016 17:19:13 +0000 (17:19 +0000)]
hostapd: update to version 2016-01-15
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48527
Felix Fietkau [Thu, 28 Jan 2016 14:13:01 +0000 (14:13 +0000)]
ramips: make tp-link firmware size errors non-fatal
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48526
Felix Fietkau [Thu, 28 Jan 2016 13:13:14 +0000 (13:13 +0000)]
kernel: fix USB on mpc85xx (#21689)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48525
Felix Fietkau [Thu, 28 Jan 2016 11:23:50 +0000 (11:23 +0000)]
uclient: update to the latest version, fixes connection timeout handling (#21726)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48524
Felix Fietkau [Thu, 28 Jan 2016 11:22:49 +0000 (11:22 +0000)]
libubox: update to the latest version, adds usock_inet_timeout() with RFC6555 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48523
Rafał Miłecki [Thu, 28 Jan 2016 08:51:58 +0000 (08:51 +0000)]
bcm53xx: fix MD5 in Seama format on flash after installing OpenWrt
We need to fix Seama just like we fix TRX due to the rootfs mark.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48522
Rafał Miłecki [Thu, 28 Jan 2016 08:51:52 +0000 (08:51 +0000)]
mtd: enable "fixseama" on bcm53xx
There are D-Link bcm53xx devices using Seama format.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48521
Rafał Miłecki [Thu, 28 Jan 2016 08:51:46 +0000 (08:51 +0000)]
bcm53xx: enable earlyprintk and all RAM on DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48520
Rafał Miłecki [Thu, 28 Jan 2016 07:01:23 +0000 (07:01 +0000)]
bcm53xx: add D-Link DIR-885L DT patch
We don't build image for this device yet.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48519
Rafał Miłecki [Thu, 28 Jan 2016 07:01:17 +0000 (07:01 +0000)]
bcm53xx: replace iproc regression fix with the final one
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48518
Rafał Miłecki [Thu, 28 Jan 2016 07:01:09 +0000 (07:01 +0000)]
bcm53xx: use two upstream USB bcma patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48517
Rafał Miłecki [Thu, 28 Jan 2016 07:00:44 +0000 (07:00 +0000)]
kernel: backport more 4.6 bcma stuff needed for new chipsets
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48516
Felix Fietkau [Thu, 28 Jan 2016 00:26:38 +0000 (00:26 +0000)]
build: filter out -fno-plt for the kernel build, fixes #21712
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48515
Felix Fietkau [Wed, 27 Jan 2016 23:58:19 +0000 (23:58 +0000)]
mt76: update to the latest version, adds some tx path and protection mode register fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48514
Felix Fietkau [Wed, 27 Jan 2016 21:40:43 +0000 (21:40 +0000)]
kernel: add missing config symbols for kmod-crypto-hw-talitos
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48513
Felix Fietkau [Wed, 27 Jan 2016 21:39:16 +0000 (21:39 +0000)]
kernel: change the OF mtd mac address patch to prefer mtd-mac-address over other properties
Fixes MAC address on TL-WDR4900
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48512
Jo-Philipp Wich [Wed, 27 Jan 2016 20:47:44 +0000 (20:47 +0000)]
brcm47xx: add proper switch port mapping for WRT610Nv2 / Linksys E3000v1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48511
Rafał Miłecki [Wed, 27 Jan 2016 12:44:07 +0000 (12:44 +0000)]
bcm53xx: switch to kernel 4.4
Initially 4.4 didn't work on bcm53xx because network was breaking few
seconds after setting interfaces. It's fixed since r48059 (switching
from 4.4-rc5 to 4.4-rc7).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48510
Rafał Miłecki [Wed, 27 Jan 2016 10:40:58 +0000 (10:40 +0000)]
bcm53xx: detect Seama sysupgrade format
It's used e.g. by D-Link devices. We don't support it yet.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48509
Felix Fietkau [Tue, 26 Jan 2016 16:45:11 +0000 (16:45 +0000)]
ramips: fix image size checks for Buffalo WSR-1166 and WSR-600
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48508
Luka Perkov [Tue, 26 Jan 2016 15:27:42 +0000 (15:27 +0000)]
generic: mark CONFIG_SUNXI_SRAM as not set
It is marked like this on most targets.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 48507
Luka Perkov [Tue, 26 Jan 2016 11:30:45 +0000 (11:30 +0000)]
generic: 4.4: refresh patches
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
SVN-Revision: 48506
Felix Fietkau [Tue, 26 Jan 2016 09:32:22 +0000 (09:32 +0000)]
ubus: update to the latest version, fixes a memory leak on client disconnect
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48505
Felix Fietkau [Tue, 26 Jan 2016 08:39:21 +0000 (08:39 +0000)]
build: do not deselect CONFIG_USE_SSTRIP if CONFIG_DEBUG is enabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48504
Felix Fietkau [Tue, 26 Jan 2016 00:10:19 +0000 (00:10 +0000)]
ustream-ssl: update to the latest version, fixes hostname validation with openssl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48503
Hauke Mehrtens [Mon, 25 Jan 2016 23:29:18 +0000 (23:29 +0000)]
x86: add BACKLIGHT_APPLE configuration option
This closes #21713.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48502
Hauke Mehrtens [Mon, 25 Jan 2016 23:26:19 +0000 (23:26 +0000)]
musl: fix mips vdso handling
mips returns -ENOSYS in case it can not handle the vdso call and wants
the libc to call the original syscall in such a case. This fixes the
patch to add such handling. I hope this fixes the random reboots I got.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48501
projects / openwrt / staging / linusw.git / log