staging: comedi: adl_pci9118: tidy up the ai control register bit defines

Rename the CamelCase defines used for the analog input control register
bits and convert them to bit shifts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_ADCNTRL define

For aesthetics, rename this define used for the analog input control
register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up the ai status register bit defines

Rename the CamelCase defines used for the analog input status register
bits and convert them to bit shifts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_ADSTAT define

For aesthetics, rename this define used for the analog input status
register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog output register defines

Replace the current defines with a macro that calculates the correct
register offset based on the channel.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog input fifo register define

For aesthetics, rename the define used for the analog input fifo register
and tidy up its use in the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_timer_set_mode()

This driver uses 32-bit instructions to write the 8254 timers so we
can't use the helper functions provided by 8253.h.

To clarify the code introduce a helper function to set the timer mode.

Remove the unnecessary commented out timer mode programming.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_timer_write()

This driver uses 32-bit instructions to write the 8254 timers so we
can't use the helper functions provided by 8253.h.

To clarify the code introduce a helper function to write to the timers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: all registers are 32-bit

According to the PCI-9118 User's Manual, all registers are 32-bit. Fix a
couple of read/write operations that use 16-bit access.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog input subdevice init

For aesthetics, add some whitespace to the analog input subdevice init.
Tidy up the subdevice n_chan initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog output subdevice init

For aesthetics, add some whitespace to the analog output subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up digital input subdevice init

For aesthetics, add some whitespace to the digital input subdevice init.

Remove the SDF_GROUND and SDF_COMMON subdev_flags. These flags only apply
to analog subdevices.

Remove the 'len_chanlist' init, this subdevice member is only used with
subdevices that support async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up digital output subdevice init

For aesthetics, add some whitespace to the digital output subdevice init.

Remove the SDF_GROUND and SDF_COMMON subdev_flags. These flags only apply
to analog subdevices.

Remove the 'len_chanlist' init, this subdevice member is only used with
subdevices that support async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: allocate private data in pci9118_common_attach()

The (*auto_attach) and legacy (*attach) both allocate the private data but
don't use it. For aesthetics, move the allocation into the common attach
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename boardinfo struct

For aesthetics, rename the struct used for the boardinfo so it has
namespace associated with the driver. Also, rename the local variable
used for the boardinfo pointer to simply 'board'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove unnecessary dev->board_name initialization

The (*auto_attach) in this driver will set the dev->board_name and the comedi core
will set it when using the legacy (*attach). Remove the unnecessary initialization
in pci9118_common_attach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'device_id' from boardinfo

This member of the boardinfo is the same for all entries. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use 'context' in (*auto_attach)

The pci_device_id 'driver_data' is passed as the 'context' when the (*auto_attach)
mechanism is used to attach this driver. Add a boardid enum and index the boardinfo
so that the "pci9118dg" boardinfo is automatically selected. This allow removing
the pci9118_find_boardinfo() helper.

Unfortunately all the boards supported by this driver have the same device id.
Add commented out entries in the device table for them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: refactor 'ai_maxdata' in boardinfo

The boards supported by this driver either have 12-bit or 16-bit analog
inputs. For aesthetics, replace the 'ai_maxdata' member in the boardinfo
with a bit-field flag, 'ai_is_16bit', and refactor the subdevice init to
use the new member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: refactor 'rangelist_ai' in boardinfo

The boards supported by this driver either have "normal" or "high gain"
analog input ranges.

For aesthetics, replace the 'rangelist_ai' member in the boardinfo with
a bit-field flag 'is_hg' to indicate the "high gain" range is used.
Refactor the subdevice init to use the flag to set the correct range_table.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'ai_pacer_min' from boardinfo

This value can easily be calculated based on the minimum sampling rate,
'ai_ns_min', and the base clock speed of the timers. Do that instead and
remove the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'ai_ns_min' from boardinfo

The minimum convert time 'ai_ns_min' is based on the sampling rate of the A/D
converter. This driver supports boards that use different ADC chips for 16-bit
and 12-bit analog inputs. These chips have different sampling rates.

For aesthetics, move the 'ai_ns_min' member from the boardinfo to the private
data. Initialize the member during the attach based on the 'maxdata' of the
analog inputs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'n_aichan' boardinfo

This member of the boardinfo is the same for all entries. Remove it.

Also, remove the initialization of the subdevice 'len_chanlist'. This
member is only used if the subdevice supports async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'n_aichand' boardinfo

This member of the boardinfo is the same for all entries. It's also
half the subdevice 'n_chan'. Use that instead and remove the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'n_aichanlist' boardinfo

This member of the boardinfo is the same for all entries. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'half_fifo_size' boardinfo

This member of the boardinfo is the same for all entries. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'n_aochan' boardinfo

This member of the boardinfo is the same for all entries. Remove it.

Also, remove the initialization of the subdevice 'len_chanlist'. This
member is only used if the subdevice supports async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'ao_maxdata' boardinfo

This member of the boardinfo is the same for all entries. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'rangelist_ao' boardinfo

This member of the boardinfo is the same for all entries. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove unused boardinfo

Remove all the boardinfo members that are not used by the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: use dev->class_dev in calls to dev_warn()

git-grep reveals that hwdrv_apci1500.c is the only file in comedi that uses
dev->hw_dev in calls to dev_{err,warn}().  The rest of the drivers pass
dev->class_dev to these macros instead.  Switch the dev_warn() calls in
this driver to use dev->class_dev as well, for consistency.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_common: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt3000: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8253.h: use CMDF_ROUND_...

Replace use of the `TRIG_ROUND_...` macros with the new names
`CMDF_ROUND_...`.  The numeric values are unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add CMDF_ROUND_... as synonyms for TRIG_ROUND_...

The `TRIG_ROUND_...` macros are some of the values that can be OR-ed
into the `flags` member of `struct comedi_cmd`.  They may influence the
rounding of sample timings during operation of the asynchronous command.

The names are a bit of a left-over from earlier times.  It would be
better to use the names `CMDF_ROUND_...` to match various other command
flags.

Define `CMDF_ROUND_MASK`, `CMDF_ROUND_NEAREST`, `CMDF_ROUND_DOWN`,
`CMDF_ROUND_UP` and `CMDF_ROUND_UP_NEXT` with the same numeric values as
`TRIG_ROUND_MASK`, `TRIG_ROUND_NEAREST`, `TRIG_ROUND_DOWN`,
`TRIG_ROUND_UP` and `TRIG_ROUND_UP_NEXT`, and redefine the
`TRIG_ROUND_...` macros as synonyms of the `CMDF_ROUND_...` macros.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use CMDF_BOGUS in do_cmd_ioctl()

`TRIG_BOGUS` is now just a synonym for `CMDF_BOGUS`.  Change
`do_cmd_ioctl()` to use the new name.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add CMDF_BOGUS as synonym for TRIG_BOGUS

`TRIG_BOGUS` is one of the values that can be OR-ed into the `flags`
member of `struct comedi_cmd`.  It causes the comedi core to go through
some of the motions of setting up an asynchronous command without
actually setting it up.  If all goes well, it causes the command set-up
to fail with an `EAGAIN` error.

The name `TRIG_BOGUS` is a bit of a left-over from earlier times.  A
better name would be `CMDF_BOGUS` to match various other command flags.

Define `CMDF_BOGUS` with the same numeric value as the old `TRIG_BOGUS`
and redefine `TRIG_BOGUS` as a synonym of it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is the same.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_common: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is the same.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.  Also change
diagnostic messages to use "CMDF_WAKE_EOS" instead of "TRIG_WAKE_EOS"
and change the Comedi driver description comment to use "CMDF_WAKE_EOS".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: use CMDF_WAKE_EOS

Replace use of `TRIG_WAKE_EOS` command flag with the new name
`CMDF_WAKE_EOS`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use CMDF_WAKE_EOS in do_cmd_ioctl()

`TRIG_WAKE_EOS` is now just a synonym for `CMDF_WAKE_EOS`.  Change
`do_cmd_ioctl()` to use the new name.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add CMDF_WAKE_EOS as synonym for TRIG_WAKE_EOS

`TRIG_WAKE_EOS` is one of the values that can be OR-ed into the `flags`
member of `struct comedi_cmd`.  It's intended action is tune the
asynchronous command to interrupt at the end of every "scan".  The name
is a bit of a left-over from earlier times.  A better name would be
`CMDF_WAKE_EOS` to match various other command flags.

Define `CMDF_WAKE_EOS` with the same numeric value as the old
`TRIG_WAKE_EOS` and redefine `TRIG_WAKE_EOS` as a synonym of it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_common: use CMDF_PRIORITY

Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: use CMDF_PRIORITY

Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`.  The numeric value is unchanged.  Also replace
"TRIG_RT" with "CMDF_PRIORITY" in the kernel messages.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: use CMDF_PRIORITY

Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: use CMDF_PRIORITY

Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`.  The numeric value is unchanged.  Also replace
"TRIG_RT" with "CMDF_PRIORITY" in kernel log messages.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: use CMDF_PRIORITY

Replace use of `TRIG_RT` command flag with the equivalent flag
`CMDF_PRIORITY`.  The numeric value is unchanged.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: remove check for CONFIG_MACH_EMGR

There's a check for CONFIG_MACH_EMGR. But the Kconfig symbol MACH_EMGR
doesn't exist. Remove that check and the single #define it hides. Note
that this macro isn't used by this driver anyway.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8821ae: base: add missing blank line after declaration

Add a missing blank line after declaration to fix coding style issue.

Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Fix whitespace - alignment matching open parenthesis

Fix occurrences in et131x.c of:

CHECK: Alignment should match open parenthesis

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Add auto-negotiation and 1000BT_Half as supported protocols

The driver supports auto-negotiation and 100BaetT_Half but doesn't
advertise or list it in it's phydev. Fix that.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Remove spinlock fbr_lock

The spinlock fbr_lock is only used in a single call sequence staring
from et131x_poll. As this call is already locked by napi->poll_lock,
we can remove it.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Remove dead code in isr

Dan Carpenter reports:
The patch c2ebf58ba089: "staging: et131x: Implement NAPI support"
from Aug 21, 2014, leads to the following static checker warning:

        drivers/staging/et131x/et131x.c:4004 et131x_isr()
        warn: we tested 'status' before and it was 'true'

We don't actually need the dead code, as we're now using NAPI to
handle enabling interrupts - but we do need to enable interrupts if
NAPI is not scheduled - so enable interrupts if this is the case.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8821ae: hal_bt_coexist: add a blank newline

Fix coding style issue which requires a blank line after declarations.

Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8821ae: hal_bt_coexist: fix curly brace placement

Fix coding style issue where the if statement unnecessarily uses curly
braces for one line statements and where the else conditional statement
should follow the closing curly brace '}'. Also, the open curly brace
'{' should be on the same line as the if statement.

Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8821ae: hal_bt_coexist: fix pointer placement coding style issue

Fix pointer placement coding style issue, where using "foo *" is
preferable over "foo*".

Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8821ae: hal_bt_coexist: add/remove spaces

Fix coding style issue which requires a space before the open
curly brace '{', after the open parenthesis '(', after a comma, and
after the equal sign '=' in an assignment.

Also, remove unnecessary whitespace after open parenthesis '(' and
before a quoted newline.

Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8821ae: hal_bt_coexist: fix commenting style

Fix commenting style from C99 comments to C89 comments

Signed-off-by: An Ha <zero579911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove write-only variables hal_data_8723a.EEPROM[VP]ID

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192u: Fix "space prohibited after that open parenthesis '('" errors

Fix checkpatch.pl "space prohibited after that open parenthesis '('" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: remove driver

The comedi skeleton driver is one of the few "hybrid" drivers with
both legacy and PCI attach mechanisms. Instead of splitting this
driver, just remove it. There are many other comedi drivers that
provide better examples.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: range check board index

The "ni_at_a2150" driver determines the board type by calling
`a2150_probe()`.  This reads a register and converts it to a board index
in the range 0 to 3.  However, the board table array it indexes into
(`a2150_boards[]`) only has 2 entries.  Return an error from the
Comedi driver "attach" handler `a2150_attach()` if the probed board
index is beyond the end of the array.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: binder: fix coding style issues

Fix coding style issues:
* put braces in all if-else branches;
* limit the length of changed lines to 80 columns.
checkpatch.pl warning count reduces by 3.

Signed-off-by: Dmitry Voytik <voytikd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Break up a long line in binder_send_failed_reply

Kernel coding style. Breaking long lines and strings.

Signed-off-by: William Panlener <wpanlener@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: use kmalloc_array over kmalloc with multiply

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: fix redundant return in void function

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: fix redundant else after break or return

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: fix missing blank line after declaration

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: uislib: uislib.c: sparse warning of context imbalance

fixed sparse warning : context imbalance in 'pause_device'
unexpected unlock
this patch will generate warning from checkpatch for
lines over 80 character , but since those are user-visible strings
so it was not modified.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Tested-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: uislib: uisqueue.c: rewrite of do_locked_client_insert

1) removed unused variables
2) fixed sparse warning of context imbalance in 'do_locked_client_insert'
                         different lock contexts for basic block
3) removed the call to visor_signalqueue_empty() , this function is
   checking whether a signal queue is empty, but the return value
   of the function is not beeing used, so it is safe to remove.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: expand the GOTO macro + break

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl,rc,f;
constant c;
@@

- GOTO(lbl,\(rc\|rc->f\|c\));
- break;
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
- break;
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: expand double GOTO macros

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
@@

if (...)
  GOTO(lbl,...);
+else
GOTO(lbl,...);

@@
identifier lbl;
expression e,e1,e2;
@@

if (e)
-  GOTO(lbl,e1);
-else GOTO(lbl,e2);
+  e1;
+else e2;
+goto lbl;

@@
identifier lbl1,lbl2;
expression e,e1,e2;
@@

+ e1=e2;
if (e)
-  GOTO(lbl1,e1=e2);
-GOTO(lbl2,e1=e2);
+  goto lbl1;
+goto lbl2;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lvfs: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: annotate lock/unlock in lov_stripe_lock / lov_stripe_unlock

Annotate the lock/unlock pair in lov_stripe_lock/lov_stripe_unlock to
avoid sparse warning about a context imbalance.
Part of the eudyptula challenge: http://eudyptula-challenge.org/

Signed-off-by: Mostyn Bramley-Moore <mbmcode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove local_storage.[ch]

Remove the unused files lustre/obdclass/local_storage.[ch].

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove llog_ioctl.c

Remove the unused function llog_ioctl() and the file
lustre/obdclass/llog_ioctl.c.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>