Daniel Vetter [Thu, 4 Oct 2018 20:24:42 +0000 (22:24 +0200)]
drm: Unexport drm_plane_helper_check_update
It's for legacy drivers only (atomic ones should use
drm_atomic_helper_check_plane_state() instead), and there's no users
left except the one in the primary plane helpers.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-18-daniel.vetter@ffwll.ch
Thomas Hellstrom [Thu, 4 Oct 2018 20:24:41 +0000 (22:24 +0200)]
drm/vmwgfx: Fix vmw_du_cursor_plane_atomic_check
Use the correct helper and also return early on helper
success rather than on helper failure.
Also explicitly return 0 in the case of no fb.
v2: Check for !fb after updating state->visible (Ville).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> (v1)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-17-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 5 Oct 2018 09:47:32 +0000 (11:47 +0200)]
drm: Unexport primary plane helpers
Well except the destroy helper, which isn't really a primary helper
but generally useful, if mislabelled.
v2: Keep some of the nice comments about the limitations of the
primarmy plane helpers, and put them into the kerneldoc for
drm_crtc_init() (Sam).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005094732.31353-1-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:45 +0000 (22:24 +0200)]
drm/todo: Add some cleanup tasks
Motivated by review comments from Ville&Sean.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-21-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:44 +0000 (22:24 +0200)]
drm/doc: fix drm_driver_legacy_fb_format
Didn't get updated in a rework of the original patch.
Fixes: 059b5eb5d955 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-20-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:40 +0000 (22:24 +0200)]
drm: Remove transitional helpers
With armada the last bigger driver that realistically needed these to
convert from legacy kms to atomic is converted. These helpers have
been broken more often than not the past 2 years, and as this little
patch series shows, tricked a bunch of people into using the wrong
helpers for their functions.
Aside: I think a lot more drivers should be using the device-level
drm_atomic_helper_shutdown/suspend/resume helpers and related
functions. In almost all the cases they get things exactly right.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-16-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:39 +0000 (22:24 +0200)]
drm/zte: Use drm_atomic_helper_shutdown
drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).
Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-15-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:38 +0000 (22:24 +0200)]
drm/vc4: Use drm_atomic_helper_shutdown
drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).
Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.
v2: Rebase.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-14-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:37 +0000 (22:24 +0200)]
drm/sti: Use drm_atomic_helper_shutdown
drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).
Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.
The sti cleanup code seems supremely confused:
- In the load error path it calls drm_mode_config_cleanup before it
stops various kms services like poll worker or fbdev emulation.
That's going to oops.
- The actual unload code doesn't even bother with the cleanup and just
leaks.
Try to fix this while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-13-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:36 +0000 (22:24 +0200)]
drm/msm: Use drm_atomic_helper_shutdown
drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).
Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rajesh Yadav <ryadav@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-12-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:35 +0000 (22:24 +0200)]
drm/arcpgu: Use drm_atomic_helper_shutdown
drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).
Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-11-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:34 +0000 (22:24 +0200)]
drm/atmel: Drop transitional hooks
These do absolutely nothing for atomic drivers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-10-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:33 +0000 (22:24 +0200)]
drm/arcpgu: Drop transitional hooks
These do absolutely nothing for atomic drivers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-9-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:31 +0000 (22:24 +0200)]
drm/atomic: Improve docs for drm_atomic_state->allow_modeset
Motivated by vmwgfx digging around in core uapi bits it shouldn't dig
around in.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-7-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:28 +0000 (22:24 +0200)]
drm: Extract drm_atomic_state_helper.[hc]
We already have a separate overview doc for this, makes sense to
untangle it from the overall atomic helpers.
v2: Rebase
v3: Rebase more.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-4-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:27 +0000 (22:24 +0200)]
drm/atomic-helper: Unexport drm_atomic_helper_best_encoder
It's the default. The exported version was kinda a transition state,
before we made this the default.
To stop new atomic drivers from using it (instead of just relying on
the default) let's unexport it.
v2: rename the default implementation to a more fitting name and add a
comment (Laurent)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Pierre-Hugues Husson <phh@phh.me>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-3-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 4 Oct 2018 20:24:26 +0000 (22:24 +0200)]
drm/amdgpu: Remove default best_encoder hook from DC
For atomic driver this is the default, no need to reimplement it. We
still need to keep the copypasta for not-atomic drivers though, since
no one polished the legacy crtc helpers as much as the atomic ones.
v2: amdgpu uses ->best_encoder internally, give it a local copy. It
might be a good idea to merge the connector and encoder into one
amdgpu_dm_sink structure, that might match DC internals better. At
least for non-DPMST outputs. Kudos to Ville for spotting this.
v3: Rebase onto
a487411a6481 ("drm/amd/display: Use DRM helper for
best_encoder").
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Tony Cheng <Tony.Cheng@amd.com>
Cc: "Leo (Sunpeng) Li" <sunpeng.li@amd.com>
Cc: Shirish S <shirish.s@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-2-daniel.vetter@ffwll.ch
Chris Wilson [Tue, 7 Aug 2018 17:47:48 +0000 (18:47 +0100)]
drm: Remove defunct dma_buf_kmap stubs
Since commit
09ea0dfbf972 ("dma-buf: make map_atomic and map function
pointers optional"), we no longer need to provide stub no-op functions
as the core now provides them directly.
References:
09ea0dfbf972 ("dma-buf: make map_atomic and map function pointers optional")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180807174748.4503-1-chris@chris-wilson.co.uk
Daniel Vetter [Fri, 5 Oct 2018 07:36:36 +0000 (09:36 +0200)]
drm/vblank: Remove old-style comments
Somehow I forgot a few when typing all the shiny new kerneldoc. Drop
them.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005073636.27291-1-daniel.vetter@ffwll.ch
Gerd Hoffmann [Tue, 2 Oct 2018 11:10:40 +0000 (13:10 +0200)]
drm: add drm_connector_attach_edid_property()
drm_connector_init doesn't attach the edid property for some connector
types, drm_connector_attach_edid_property() can be used to enable the
edid property in these cases.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20181002111041.17053-2-kraxel@redhat.com
Manasi Navare [Tue, 2 Oct 2018 21:50:55 +0000 (14:50 -0700)]
drm: Fix kernel doc for DRM_MODE_PROP_IMMUTABLE
This patch explains the DRM_MODE_PROP_IMMUTABLE flag a bit better
by telling which function to call if kernel wants to update
drm object's immutable properties.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002215055.8652-1-manasi.d.navare@intel.com
Daniel Vetter [Wed, 3 Oct 2018 13:21:03 +0000 (15:21 +0200)]
drm/vkms: Extend todo
Typed up all the items Rodrigo capture at the vkms workshop at
xdc2018:
https://etherpad.net/p/vkms_todo
v2: Review from Rodrigo.
- Add eBPF for atomic check, I forgot it.
- Improve spelling.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003132103.29309-1-daniel.vetter@ffwll.ch
Ville Syrjälä [Fri, 21 Sep 2018 14:33:32 +0000 (17:33 +0300)]
video/hdmi: Constify infoframe passed to the pack functions
Let's make the infoframe pack functions usable with a const infoframe
structure. This allows us to precompute the infoframe earlier, and still
pack it later when we're no longer allowed to modify the structure.
So now we end up with a _check()+_pack_only() or _pack() functions
depending on whether you want to precompute the infoframes or not.
The names aren't great but I was lazy and didn't want to change all the
drivers.
v2: Deal with exynos churn
Actually export the new funcs
v3: Fix various documentation fails (Hans)
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921143332.28970-1-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Satendra Singh Thakur [Wed, 26 Sep 2018 20:41:50 +0000 (22:41 +0200)]
drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parameters
Use the drm_display_mode_to_videomode function to calculate front/
back porches and sync length.
Cc: Madhur Verma <madhur.verma@samsung.com>
Cc: Hemanshu Srivastava <hemanshu.s@samsung.com>
Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-2-stefan@agner.ch
Stefan Agner [Wed, 26 Sep 2018 20:41:49 +0000 (22:41 +0200)]
drm/fsl-dcu: drop unused drm_crtc_index()
The result of drm_crtc_index() is unused. Remove the call and
the unused variable.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-1-stefan@agner.ch
Ville Syrjälä [Thu, 20 Sep 2018 18:51:30 +0000 (21:51 +0300)]
video/hdmi: Constify infoframe passed to the log functions
The log functions don't modify the passed in infoframe so make it const.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-4-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Ville Syrjälä [Thu, 20 Sep 2018 18:51:29 +0000 (21:51 +0300)]
video/hdmi: Pass buffer size to infoframe unpack functions
To make sure the infoframe unpack functions don't end up examining
stack garbage or oopsing, let's pass in the size of the buffer.
v2: Convert tda1997x.c as well (kbuild test robot)
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-3-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Ville Syrjälä [Thu, 20 Sep 2018 18:51:28 +0000 (21:51 +0300)]
video/hdmi: Constify 'buffer' to the unpack functions
The unpack functions just read from the passed in buffer,
so make it const.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-2-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Rob Herring [Fri, 28 Sep 2018 22:50:44 +0000 (17:50 -0500)]
drm: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
For drm_modes.c, the full node path is already printed out, so printing
just the node name a 2nd time is redundant and can be removed.
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928225044.20132-1-robh@kernel.org
Thomas Zimmermann [Wed, 26 Sep 2018 11:36:23 +0000 (13:36 +0200)]
drm/bochs: Replace drm_gem_object_unreference_unlocked with put function
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
v2:
* rebase onto fbdev rework
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926113623.22679-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thomas Zimmermann [Wed, 26 Sep 2018 12:06:50 +0000 (14:06 +0200)]
drm/zte: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926120650.25614-1-tzimmermann@suse.de
Heiko Stuebner [Wed, 12 Sep 2018 12:47:40 +0000 (14:47 +0200)]
drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328
The rk3328 uses a dw-hdmi controller with an external hdmi phy from
Innosilicon which uses the generic phy framework for access.
Add the necessary data and the compatible for the rk3328 to the
rockchip dw-hdmi driver.
changes in v5:
- disable CEC_5V option to make CEC actually work (Jonas)
changes in v3:
- reword as suggested by Rob to show that it's a dw-hdmi + Inno phy
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de
Heiko Stuebner [Wed, 12 Sep 2018 12:47:39 +0000 (14:47 +0200)]
drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data object
When using special phy handling operations we'll often need access to
the rockchip_hdmi struct.
As the chip-data that occupies the phy_data pointer initially gets
assigned to the rockchip_hdmi struct, we can now re-use this phy_data
pointer to hold the reference to the rockchip_hdmi struct and use this
reference later on.
Inspiration for this comes from meson and sunxi dw-hdmi, which are using
the same method.
changes in v3:
- reword commit message
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-6-heiko@sntech.de
Heiko Stuebner [Wed, 12 Sep 2018 12:47:38 +0000 (14:47 +0200)]
drm/rockchip: dw_hdmi: allow including external phys
Some variants of the dw-hdmi on Rockchip socs use a separate phy block
accessed via the generic phy framework, so allow them to be included
if such a phy reference is found.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-5-heiko@sntech.de
Heiko Stuebner [Wed, 12 Sep 2018 12:47:37 +0000 (14:47 +0200)]
dt-bindings: allow optional phys in Rockchip dw_hdmi binding
Some newer Rockchip SoCs use an Innosilicon hdmiphy accessed via general
mmio, so allow these to be referenced via the regular phy interfaces
and therefore add optional phy-related properties to the binding.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-4-heiko@sntech.de
Heiko Stuebner [Wed, 12 Sep 2018 12:47:36 +0000 (14:47 +0200)]
drm/rockchip: dw_hdmi: Allow outputs that don't need output switching
So far we always encountered socs with 2 output crtcs needing the driver
to tell the hdmi block which output to connect to. But there also exist
socs with only one crtc like the rk3228, rk3328 and rk3368.
So adapt the register field to simply carry a negative value to signal
that no output-switching is necessary.
changes in v3:
- fixed wording issue found by Robin Murphy
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de
Heiko Stuebner [Wed, 12 Sep 2018 12:47:35 +0000 (14:47 +0200)]
drm/bridge: dw-hdmi: allow forcing vendor phy-type
In some IP implementations the reading of the phy-type may be broken.
One example are the Rockchip rk3228 and rk3328 socs that use a separate
vendor-type phy from Innosilicon but still report the HDMI20_TX type.
So allow the glue driver to force the vendor-phy for these cases.
In the future it may be necessary to allow forcing other types, but
for now we'll keep it simply to the case actually seen in the wild.
changes in v3:
- only allow forcing vendor type, as suggested by Laurent
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-2-heiko@sntech.de
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de
Benjamin Gaignard [Fri, 29 Jun 2018 13:01:40 +0000 (15:01 +0200)]
drm: stm: implement get_scanout_position function
Hardware allow to read the position in scanout buffer so
we can use this information to make wait of vblank more accurate.
Active area bounds (start, end, total height) have already been
computed and written in ltdc registers, read them and get the
current line position to compute vpos value.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629130140.16004-1-benjamin.gaignard@linaro.org
Stefan Mavrodiev [Thu, 12 Jul 2018 08:21:53 +0000 (11:21 +0300)]
drm/panel: Add support for Olimex LCD-OLinuXino panel
This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The panel
is used with different LCDs (currently from 480x272 to 1280x800). A
small EEPROM chip is used for identification, which holds some factory
data and timing requirements.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531383729-13932-1-git-send-email-stefan@olimex.com
Marco Felsch [Mon, 24 Sep 2018 15:26:10 +0000 (17:26 +0200)]
drm/panel: simple: Add DLC1010GIG panel
Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the
simple-panel driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180924152610.25939-1-m.felsch@pengutronix.de
Chen-Yu Tsai [Fri, 7 Sep 2018 04:19:46 +0000 (12:19 +0800)]
drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.
This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.
Depending on the variant, the PCB attached to the panel module either
supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
itself.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-5-wens@csie.org
Heiko Stuebner [Thu, 16 Aug 2018 14:09:20 +0000 (16:09 +0200)]
drm/panel: p079zca: unconditionally remove the panel on removal
There is no need to check innolux->base.dev when trying to remove
the panel, as that variable is always set directly before the panel
gets added and will still be available on panel_remove.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816140920.5009-1-heiko@sntech.de
Giulio Benetti [Mon, 30 Jul 2018 23:11:17 +0000 (01:11 +0200)]
dt-bindings: Add CDTech S043WQ26H-CT7 panel bindings
Add documentation for S043WQ26H-CT7 panel
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-6-giulio.benetti@micronovasrl.com
Giulio Benetti [Mon, 30 Jul 2018 23:11:16 +0000 (01:11 +0200)]
drm/panel: add panel CDTech S043WQ26H-CT7 to panel-simple
This patch adds support for CDTech S043WQ26H-CT7 480x272 4.3" panel to
DRM simple panel driver.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-5-giulio.benetti@micronovasrl.com
Giulio Benetti [Mon, 30 Jul 2018 23:11:15 +0000 (01:11 +0200)]
dt-bindings: Add CDTech S070WV95-CT16 panel bindings
Add documentation for S070WV95-CT16 panel
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-4-giulio.benetti@micronovasrl.com
Giulio Benetti [Mon, 30 Jul 2018 23:11:14 +0000 (01:11 +0200)]
drm/panel: add panel CDTech S070WV95-CT16 to panel-simple
This patch adds support for CDTech S070WV95-CT16 800x480 7" panel to DRM
simple panel driver.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-3-giulio.benetti@micronovasrl.com
Giulio Benetti [Mon, 30 Jul 2018 23:11:13 +0000 (01:11 +0200)]
dt-bindings: Add vendor prefix for CDTech(H.K.) Electronics Limited
This adds a vendor prefix "cdtech" for CDTech(H.K.) Electronics Limited
Website: www.cdtech-lcd.com
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-2-giulio.benetti@micronovasrl.com
Fabio Estevam [Thu, 26 Jul 2018 03:19:27 +0000 (00:19 -0300)]
drm/panel: seiko-43wvf1g: Add missing ">" character in author's email
There is a missing ">" character in Marco's email.
Fix it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532575167-14754-2-git-send-email-festevam@gmail.com
Fabio Estevam [Thu, 26 Jul 2018 03:19:26 +0000 (00:19 -0300)]
drm/panel: seiko-43wvf1g: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532575167-14754-1-git-send-email-festevam@gmail.com
Andrzej Hajda [Wed, 25 Jul 2018 15:46:43 +0000 (17:46 +0200)]
drm/panel: simple: fix BOE/HV070WSA-100 timings
Panel timings were taken from vendor code and are not fully correct -
refresh rate is about 50Hz instead of 60Hz. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-9-a.hajda@samsung.com
Hans de Goede [Sun, 9 Sep 2018 13:34:57 +0000 (15:34 +0200)]
drm: panel-orientation-quirks: Add quirk for GPD win2
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_win2 data struct may very well need to be updated
with some extra bios-dates in the future.
Reported-and-tested-by: russianneuromancer@ya.ru
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180909133457.10636-3-hdegoede@redhat.com
Arnd Bergmann [Wed, 26 Sep 2018 19:38:36 +0000 (21:38 +0200)]
drm/imx: fix build failure without CONFIG_DRM_FBDEV_EMULATION
The variable is declared in an #ifdef section, but the user is
now unconditional, which leads to a build failure:
drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind':
drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'?
Remove the remaining #ifdef as well.
Fixes: f53705fd9803 ("drm/imx: Use drm_fbdev_generic_setup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de
Heiko Stuebner [Sun, 23 Sep 2018 12:37:30 +0000 (14:37 +0200)]
drm/rockchip: vop: add rk3188 hs_start interrupt as dsp_hold equivalent
The hs_start interrupt on rk3188 fires at the start of a new frame, so
serves essentially the same purpose as the dsp_hold_valid irq in checking
when the last frame got delivered when going to standby. So define it
to fix a hang on atomic_disable of the vop because the completion never
really completed before.
Fixes: 428e15cc41e3 ("drm/rockchip: vop: add rk3188 vop definitions")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180923123730.14706-1-heiko@sntech.de
Thomas Zimmermann [Sun, 1 Jul 2018 13:24:15 +0000 (15:24 +0200)]
drm/atmel-hlcdc: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180701132415.10161-1-contact@tzimmermann.org
Jernej Skrabec [Mon, 25 Jun 2018 12:02:53 +0000 (14:02 +0200)]
dt-bindings: display: sun4i-drm: Add R40 mixer compatibles
R40 DE2 mixers are similar to those found in A83T, except it needs
different clock settings.
Add a compatibles for them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-14-jernej.skrabec@siol.net
Chen-Yu Tsai [Fri, 21 Sep 2018 14:27:43 +0000 (22:27 +0800)]
Revert "drm/sun4i: Remove R40 display pipeline compatibles"
This reverts commit
3510e7a7f91088159bfc67e8abdc9f9e77d28870.
During the 4.19 merge window for drm-misc, two patches critical to
supporting the display pipeline on the Allwinner R40 SoC were missed.
They were applied later but missed the merge window deadline. As a
result 4.19-rc1 kernel would crash on the R40 when it couldn't parse
the new device tree structure. We ended up removing support for the
R40 display pipeline for 4.19.
Since the missing patches are already merged for 4.20, we can now
revert the commit that removed support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921142743.8711-1-wens@csie.org
Sean Paul [Thu, 27 Sep 2018 06:54:54 +0000 (02:54 -0400)]
Merge drm/drm-next into drm-misc-next
Backmerging 4.19-rc5 to pick up sun4i fix
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Dave Airlie [Thu, 27 Sep 2018 01:06:46 +0000 (11:06 +1000)]
BackMerge v4.19-rc5 into drm-next
Sean Paul requested an -rc5 backmerge from some sun4i fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 27 Sep 2018 01:00:06 +0000 (11:00 +1000)]
Merge tag 'drm-hisilicon-next-2018-09-26' of github.com:xin3liang/linux into drm-next
- A crash fix founded in recent linux-next from John Garry
- One sparse warning fix from Souptick Joarder
- Some xxx_unref cleanup from Thomas Zimmermann
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAGd==04mXPMjVZ3=cM8r+DSQNM6zy7Anc4T2OsHjZgSsazBTPQ@mail.gmail.com
Dave Airlie [Thu, 27 Sep 2018 00:54:54 +0000 (10:54 +1000)]
Merge tag 'du-next-
20180925' of git://linuxtv.org/pinchartl/media into drm-next
R-Car DU support for the D3 and E3 SoCs (v4.20)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3289904.RCOHkcp7u8@avalon
Thomas Zimmermann [Wed, 26 Sep 2018 11:43:12 +0000 (13:43 +0200)]
drm/fsl-dcu: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926114312.23097-1-tzimmermann@suse.de
Stefan Agner [Wed, 26 Sep 2018 12:50:34 +0000 (14:50 +0200)]
MAINTAINERS: Move fsl-dcu driver to drm-misc tree
The driver is mostly in maintenance mode. Using drm-misc is a
good fit and should make maintenance a bit easier.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926125034.4095-1-stefan@agner.ch
Leonard Crestez [Mon, 17 Sep 2018 13:42:15 +0000 (16:42 +0300)]
drm/mxsfb: Switch to drm_atomic_helper_commit_tail_rpm
The lcdif block is only powered on when display is active so plane
updates when not enabled are not valid. Writing to an unpowered IP block
is mostly ignored but can trigger bus errors on some chips.
Prevent this situation by switching to drm_atomic_helper_commit_tail_rpm
and having the drm core ensure atomic_plane_update is only called while
the crtc is active. This avoids having to keep track of "enabled" bits
inside the mxsfb driver.
This also requires handling the vblank event for disable from
mxsfb_pipe_disable.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Suggested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c19c0c00ed42e8e8f7965aa4821ac295abc5cd05.1537191359.git.leonard.crestez@nxp.com
Leonard Crestez [Mon, 17 Sep 2018 13:42:14 +0000 (16:42 +0300)]
drm/mxsfb: Add PM_SLEEP support
Since power to the lcdif block can be lost on suspend implement
PM_SLEEP_OPS using drm_mode_config_helper_suspend/resume to save/restore
the current mode.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cfa1a4083eefd112362e640deeb2e120584ac3f5.1537191359.git.leonard.crestez@nxp.com
Leonard Crestez [Mon, 17 Sep 2018 13:42:13 +0000 (16:42 +0300)]
drm/mxsfb: Add pm_runtime calls to pipe_enable/disable
Adding lcdif nodes to a power domain currently results in
black/corrupted screens or hangs because power is not correctly enabled
when required.
Ensure power is on when display is active by adding
pm_runtime_get/put_sync to mxsfb_pipe_enable/disable.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ee88148399c63494cda4129b05444b0ac331b7a7.1537191359.git.leonard.crestez@nxp.com
Leonard Crestez [Mon, 17 Sep 2018 13:42:12 +0000 (16:42 +0300)]
drm/mxsfb: Fix initial corrupt frame when activating display
LCDIF will repeatedly display data from CUR_BUF and set CUR_BUF to
NEXT_BUF when done. Since we are only ever writing to NEXT_BUF the
display will show an initial corrupt frame.
Fix by writing the FB paddr to both CUR_BUF and NEXT_BUF when
activating the CRTC.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7cdac9c064cc2b8a3d237934f186da98cefe6cb3.1537191359.git.leonard.crestez@nxp.com
Leonard Crestez [Mon, 17 Sep 2018 13:42:11 +0000 (16:42 +0300)]
drm/mxsfb: Move axi clk enable/disable to crtc enable/disable
The main axi clk is disabled at the end of mxsfb_crtc_mode_set_nofb and
immediately reenabled in mxsfb_enable_controller.
Avoid this by moving the handling of axi clk one level up to
mxsfb_crtc_enable. Do the same for mxsfb_crtc_disable for symmetry.
This shouldn't have any functional effect.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/985c1f1cad250bd9ca154b3e4b3f913c310eeabd.1537191359.git.leonard.crestez@nxp.com
Thomas Zimmermann [Wed, 26 Sep 2018 11:56:40 +0000 (13:56 +0200)]
drm/tegra: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926115640.24755-1-tzimmermann@suse.de
Thomas Zimmermann [Wed, 26 Sep 2018 12:02:12 +0000 (14:02 +0200)]
drm/udl: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926120212.25359-1-tzimmermann@suse.de
Sean Paul [Wed, 19 Sep 2018 20:39:58 +0000 (16:39 -0400)]
MAINTAINERS: Move mxsfb drm driver to drm-misc tree
Another "small driver" moving into drm-misc. Stefan has also offered to
co-maintain it.
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919204026.3217-2-sean@poorly.run
Ezequiel Garcia [Tue, 25 Sep 2018 16:16:06 +0000 (18:16 +0200)]
virtio: Support prime objects vmap/vunmap
Implement vmap/vunmap so we can export dmabufs to
other drivers, such as video4linux.
Tested with a virtio-gpu / vivid (virtual capture driver)
pipeline, where the vivid driver imports the dmabufs exported
by virtio-gpu.
Note that dma_buf_vmap() does its own vmap counting, so
it's not needed to take care of it in the driver.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-4-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ezequiel Garcia [Tue, 25 Sep 2018 16:16:05 +0000 (18:16 +0200)]
virtio: Rework virtio_gpu_object_kmap()
Currently, virtio_gpu_object_kmap() is only called by
virtio_gpufb_create(), when a DRM framebuffer is created.
Thus, instead of returning the vmap'ed address, emit a warning
if virtio_gpu_object_kmap is called on an already mapped
object. With this change, kmap/kunmap calls are now balanced.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-3-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ezequiel Garcia [Tue, 25 Sep 2018 16:16:04 +0000 (18:16 +0200)]
virtio: Add virtio_gpu_object_kunmap()
Implement a virtio_gpu_object_kunmap() to unmap the kernel
mapping, and use it in the TTM object destroy path.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-2-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thomas Zimmermann [Tue, 31 Jul 2018 06:33:05 +0000 (08:33 +0200)]
drm/hisilicon: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Thomas Zimmermann [Fri, 13 Jul 2018 08:48:24 +0000 (10:48 +0200)]
drm/hisilicon: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Souptick Joarder [Mon, 6 Aug 2018 14:49:01 +0000 (20:19 +0530)]
gpu/drm/hisilicon: Convert drm_atomic_helper_suspend/resume()
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
Fixed one sparse warning by making hibmc_drm_interrupt
static.
Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
John Garry [Fri, 21 Sep 2018 17:25:27 +0000 (01:25 +0800)]
drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro
Switch to use Huawei PCI vendor ID macro from pci_ids.h file.
In addition, switch to use PCI_VDEVICE() instead of open coding.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
John Garry [Fri, 21 Sep 2018 17:25:26 +0000 (01:25 +0800)]
drm/hisilicon: hibmc: Don't overwrite fb helper surface depth
Currently the driver overwrites the surface depth provided by the fb
helper to give an invalid bpp/surface depth combination.
This has been exposed by commit
70109354fed2 ("drm: Reject unknown legacy
bpp and depth for drm_mode_addfb ioctl"), which now causes the driver to
fail to probe.
Fix by not overwriting the surface depth.
Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
John Garry [Fri, 21 Sep 2018 17:25:25 +0000 (01:25 +0800)]
drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer pointer
In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails
with error, do not store the error code in the HiBMC device frame-buffer
pointer, as this will be later checked for non-zero value in
hibmc_fbdev_destroy() when our intention is to check for a valid function
pointer.
This fixes the following crash:
[ 9.699791] Unable to handle kernel NULL pointer dereference at virtual address
000000000000001a
[ 9.708672] Mem abort info:
[ 9.711489] ESR = 0x96000004
[ 9.714570] Exception class = DABT (current EL), IL = 32 bits
[ 9.720551] SET = 0, FnV = 0
[ 9.723631] EA = 0, S1PTW = 0
[ 9.726799] Data abort info:
[ 9.729702] ISV = 0, ISS = 0x00000004
[ 9.733573] CM = 0, WnR = 0
[ 9.736566] [
000000000000001a] user address but active_mm is swapper
[ 9.742987] Internal error: Oops:
96000004 [#1] PREEMPT SMP
[ 9.748614] Modules linked in:
[ 9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G W
4.19.0-rc4-next-20180920-00001-g9b0012c #322
[ 9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
[ 9.771915] Workqueue: events work_for_cpu_fn
[ 9.776312] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 9.781150] pc : drm_mode_object_put+0x0/0x20
[ 9.785547] lr : hibmc_fbdev_fini+0x40/0x58
[ 9.789767] sp :
ffff00000af1bcf0
[ 9.793108] x29:
ffff00000af1bcf0 x28:
0000000000000000
[ 9.798473] x27:
0000000000000000 x26:
ffff000008f66630
[ 9.803838] x25:
0000000000000000 x24:
ffff0000095abb98
[ 9.809203] x23:
ffff8017db92fe00 x22:
ffff8017d2b13000
[ 9.814568] x21:
ffffffffffffffea x20:
ffff8017d2f80018
[ 9.819933] x19:
ffff8017d28a0018 x18:
ffffffffffffffff
[ 9.825297] x17:
0000000000000000 x16:
0000000000000000
[ 9.830662] x15:
ffff0000092296c8 x14:
ffff00008939970f
[ 9.836026] x13:
ffff00000939971d x12:
ffff000009229940
[ 9.841391] x11:
ffff0000085f8fc0 x10:
ffff00000af1b9a0
[ 9.846756] x9 :
000000000000000d x8 :
6620657a696c6169
[ 9.852121] x7 :
ffff8017d3340580 x6 :
ffff8017d4168000
[ 9.857486] x5 :
0000000000000000 x4 :
ffff8017db92fb20
[ 9.862850] x3 :
0000000000002690 x2 :
ffff8017d3340480
[ 9.868214] x1 :
0000000000000028 x0 :
0000000000000002
[ 9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____))
[ 9.880788] Call trace:
[ 9.883252] drm_mode_object_put+0x0/0x20
[ 9.887297] hibmc_unload+0x1c/0x80
[ 9.890815] hibmc_pci_probe+0x170/0x3c8
[ 9.894773] local_pci_probe+0x3c/0xb0
[ 9.898555] work_for_cpu_fn+0x18/0x28
[ 9.902337] process_one_work+0x1e0/0x318
[ 9.906382] worker_thread+0x228/0x450
[ 9.910164] kthread+0x128/0x130
[ 9.913418] ret_from_fork+0x10/0x18
[ 9.917024] Code:
a94153f3 a8c27bfd d65f03c0 d503201f (
f9400c01)
[ 9.923180] ---[ end trace
2695ffa0af5be375 ]---
Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Gerd Hoffmann [Fri, 21 Sep 2018 13:47:04 +0000 (15:47 +0200)]
drm: move quirk_addfb_prefer_xbgr_30bpp handling to drm_driver_legacy_fb_format too
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-7-kraxel@redhat.com
Gerd Hoffmann [Fri, 21 Sep 2018 13:47:03 +0000 (15:47 +0200)]
drm/virtio: fix DRM_FORMAT_* handling
Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code
on bigendian machines. Also set the quirk_addfb_prefer_host_byte_order
mode_config bit so drm_mode_addfb() asks for the correct format code.
Both DRM_FORMAT_* and VIRTIO_GPU_FORMAT_* are defined to be little
endian, so using a different mapping on bigendian machines is wrong.
It's there because of broken drm_mode_addfb() behavior. So with
drm_mode_addfb() being fixed we can fix this too.
While wading through the code I've noticed we have a little issue in
virtio: We attach a format to the bo when it is created
(DRM_IOCTL_MODE_CREATE_DUMB), not when we map it as framebuffer
(DRM_IOCTL_MODE_ADDFB). Easy way out: Support a single format only.
Pick DRM_FORMAT_HOST_XRGB8888, it is the only one actually used in
practice. Drop unused mappings in virtio_gpu_translate_format().
With this patch applied both ADDFB and ADDFB2 ioctls work correctly in
the virtio-gpu.ko driver on big endian machines. Without the patch only
ADDFB (which still seems to be used by the majority of userspace) works
correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-6-kraxel@redhat.com
Gerd Hoffmann [Fri, 21 Sep 2018 13:47:02 +0000 (15:47 +0200)]
drm/bochs: support changing byteorder at mode set time
Add bochs_hw_set_*_endian() helper functions, to set the framebuffer
byteorder at mode set time. Support both DRM_FORMAT_XRGB8888 and
DRM_FORMAT_BGRX8888 framebuffer formats, no matter what the native
machine byte order is.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-5-kraxel@redhat.com
Gerd Hoffmann [Fri, 21 Sep 2018 13:47:01 +0000 (15:47 +0200)]
drm/bochs: fix DRM_FORMAT_* handling for big endian machines.
Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code
on bigendian machines. Also set the quirk_addfb_prefer_host_byte_order
mode_config bit so drm_mode_addfb() asks for the correct format code.
Create our own plane and use drm_crtc_init_with_planes() instead of
depending on the default created by drm_crtc_init(). That way the plane
format list is correct on bigendian machines.
Also re-add the framebuffer format check dropped by "
df2052cc92 bochs:
convert to drm_fb_helper_fbdev_setup/teardown".
With this patch applied both ADDFB and ADDFB2 ioctls work correctly in
the bochs-drm.ko driver on big endian machines. Without the patch only
ADDFB (which still seems to be used by the majority of userspace) works
correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-4-kraxel@redhat.com
Gerd Hoffmann [Fri, 21 Sep 2018 13:47:00 +0000 (15:47 +0200)]
drm: use drm_driver_legacy_fb_format in drm_gem_fbdev_fb_create
Creating framebuffers for fbdev emulation should use the correct format
code too, so switch drm_gem_fbdev_fb_create() over to use the new
drm_driver_legacy_fb_format() function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-3-kraxel@redhat.com
Gerd Hoffmann [Fri, 21 Sep 2018 13:46:59 +0000 (15:46 +0200)]
drm: move native byte order quirk to new drm_driver_legacy_fb_format function
Turns out we need the pixel format fixup not only for the addfb ioctl,
but also for fbdev emulation code.
Ideally we would place it in drm_mode_legacy_fb_format(). That would
create alot of churn though, and most drivers don't care because they
never ever run on a big endian platform. So add a new
drm_driver_legacy_fb_format() function instead which looks at the
mode_config->quirk_addfb_prefer_host_byte_order flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-2-kraxel@redhat.com
Gerd Hoffmann [Thu, 20 Sep 2018 06:29:23 +0000 (08:29 +0200)]
drm/virtio: pass virtio_gpu_object to virtio_gpu_cmd_transfer_to_host_{2d, 3d}
Pass virtio_gpu_object down to virtio_gpu_cmd_transfer_to_host_2d and
virtio_gpu_cmd_transfer_to_host_3d functions, instead of passing just
the virtio resource handle.
This is needed to lookup the scatter list of the object, for dma sync.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiandi An <jiandi.an@amd.com>
Tested-by: Jiandi An <jiandi.an@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180920062924.6514-1-kraxel@redhat.com
Noralf Trønnes [Sat, 8 Sep 2018 13:46:47 +0000 (15:46 +0200)]
drm/zte: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-20-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:46 +0000 (15:46 +0200)]
drm/vc4: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-19-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:45 +0000 (15:46 +0200)]
drm/tve200: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-18-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:41 +0000 (15:46 +0200)]
drm/sti: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
If drm_fbdev_generic_setup() fails, an error is printed by the function.
drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-14-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:40 +0000 (15:46 +0200)]
drm/pl111: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-13-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:39 +0000 (15:46 +0200)]
drm/imx: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
CONFIG_DRM_FBDEV_EMULATION wasn't honoured by the CMA helper, but it is by
drm_fb_helper.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-12-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:37 +0000 (15:46 +0200)]
drm/arm/mali: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-10-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:36 +0000 (15:46 +0200)]
drm/arm/hdlcd: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-9-noralf@tronnes.org
Noralf Trønnes [Sat, 8 Sep 2018 13:46:29 +0000 (15:46 +0200)]
drm/fb-helper: Improve error reporting in setup
Improve error reporting in drm_fb_helper_fbdev_setup() by printing the
error code. This is useful for drivers that choose to not fall over just
because fbdev doesen't work, but still wants clues to why it failed.
This way they don't have to provide an error message themselves.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-2-noralf@tronnes.org
Ulrich Hecht [Tue, 14 Aug 2018 13:49:56 +0000 (15:49 +0200)]
drm: rcar-du: Add r8a77990 and r8a77995 device support
Add support for the R-Car D3 (R8A77995) and E3 (R8A77990) SoCs to the
R-Car DU driver. The two SoCs instantiate compatible DUs, so a single
information structure is enough.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
[Add support for R8A77990]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 22 Aug 2018 13:21:33 +0000 (16:21 +0300)]
drm: rcar-du: Don't use TV sync mode when not supported by the hardware
The official way to stop the display is to clear the display enable
(DEN) bit in the DSYSR register, but that operates at a group level and
affects the two channels in the group. To disable channels selectively,
the driver uses TV sync mode that stops display operation on the channel
and turns output signals into inputs.
While TV sync mode is available in all DU models currently supported,
the D3 and E3 DUs don't support it. We will thus need to find an
alternative way to turn channels off.
In the meantime, condition the switch to TV sync mode to the
availability of the feature, to avoid writing an invalid value to the
DSYSR register. When the feature is unavailable the display output will
turn blank as all planes are disabled when stopping the CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 22 Aug 2018 13:05:02 +0000 (16:05 +0300)]
drm: rcar-du: Cache DSYSR value to ensure known initial value
DSYSR is a DU channel register that also contains group fields. It is
thus written to by both the group and CRTC code, using read-update-write
sequences. As the register isn't initialized explicitly at startup time,
this can lead to invalid or otherwise unexpected values being written to
some of the fields if they have been modified by the firmware or just
not reset properly.
To fix this we can write a fully known value to the DSYSR register when
turning a channel's functional clock on. However, the mix of group and
channel fields complicate this. A simpler solution is to cache the
register and initialize the cached value to the desired hardware
defaults.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Tue, 21 Aug 2018 21:01:07 +0000 (00:01 +0300)]
drm: rcar-du: Enable configurable DPAD0 routing on Gen3
All Gen3 SoCs supported so far have a fixed association between DPAD0
and DU channels, which led to hardcoding that association when writing
the corresponding hardware register. The D3 and E3 will break that
mechanism as DPAD0 can be dynamically connected to either DU0 or DU1.
Make DPAD0 routing dynamic on Gen3. To ensure a valid hardware
configuration when the DU starts without the RGB output enabled, DPAD0
is associated at initialization time to the first DU channel that it can
be connected to. This makes no change on Gen2 as all Gen2 SoCs can
connected DPAD0 to DU0, which is the current implicit default value.
As the DPAD0 source is always 0 when a single source is possible on
Gen2, we can also simplify the Gen2 code in the same function to remove
a conditional check.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Laurent Pinchart [Tue, 21 Aug 2018 18:31:04 +0000 (21:31 +0300)]
drm: rcar-du: Use LVDS PLL clock as dot clock when possible
On selected SoCs, the DU can use the clock output by the LVDS encoder
PLL as its input dot clock. This feature is optional, but on the D3 and
E3 SoC it is often the only way to obtain a precise dot clock frequency,
as the other available clocks (CPG-generated clock and external clock)
usually have fixed rates.
Add a DU model information field to describe which DU channels can use
the LVDS PLL output clock as their input clock, and configure clock
routing accordingly.
This feature is available on H2, M2-W, M2-N, D3 and E3 SoCs, with D3 and
E3 being the primary targets. It is left disabled in this commit, and
will be enabled per-SoC after careful testing.
At the hardware level, clock routing is configured at runtime in two
steps, first selecting an internal dot clock between the LVDS PLL clock
and the external DOTCLKIN clock, and then selecting between the internal
dot clock and the CPG-generated clock. The first part requires stopping
the whole DU group in order for the change to take effect, thus causing
flickering on the screen. For this reason we currently hardcode the
clock source to the LVDS PLL clock if available, and allow flicker-free
selection of the external DOTCLKIN clock or CPG-generated clock
otherwise. A more dynamic clock selection process can be implemented
later if the need arises.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
projects / openwrt / staging / blogic.git / log