drm/amd/powerplay: Only load SDMA0/MEC firmware once on Stoney (v2)

Only load the SDMA0/MEC1 firmware once in the Carrizo SMU manager
driver.

(v2) Avoid loading SDMA0 twice too.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Fix up return codes in cz SMU manager

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz SMU manager

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay:  Fix CZ SMU firmware load check (v4)

Remove an errant return in the middle of the check
function as well as check for success in the start
function.

(v2) Add return check to smu_load_fw()
(v3) Don't return early if SMU load check fails
(v4) No returns!  :-)

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: throttle buffer migrations at CS using a fixed MBps limit (v2)

The old mechanism used a per-submission limit that didn't take previous
submissions within the same time frame into account. It also filled VRAM
slowly when VRAM usage dropped due to a big eviction or buffer deallocation.

This new method establishes a configurable MBps limit that is obeyed when
VRAM usage is very high. When VRAM usage is not very high, it gives
the driver the freedom to fill it quickly. The result is more consistent
performance.

It can't keep the BO move rate low if lots of evictions are happening due
to VRAM fragmentation, or if a big buffer is being migrated.

The amdgpu.moverate parameter can be used to set a non-default limit.
Measurements can be done to find out which amdgpu.moverate setting gives
the best results.

Mainly APUs and cards with small VRAM will benefit from this. For F1 2015,
anything with 2 GB VRAM or less will benefit.

Some benchmark results - F1 2015 (Tonga 2GB):

Limit      MinFPS AvgFPS
Old code:  14     32.6
128 MB/s:  28     41
64 MB/s:   15.5   43
32 MB/s:   28.7   43.4
8 MB/s:    27.8   44.4
8 MB/s:    21.9   42.8 (different run)

Random drops in Min FPS can still occur (due to fragmented VRAM?), but
the average FPS is much better. 8 MB/s is probably a good limit for this
game & the current VRAM management. The random FPS drops are still to be
tackled.

v2: use a spinlock

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Tidy up cz_dpm.c

Various minor formatting changes.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Clean up memory leak in cz_dpm_init().

If init fails free up any allocated memory.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix memleak in cz_parse_power_table()

If one of the entries fails to be allocated then free
all of the previous entries before freeing the array which
holds their pointers.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine uvd gate logic for CI.

uvd dpm will be controlled by uvd.
dpm just disable uvd dpm in case of suspend when play video.
due to the new logic of uvd_begin_use/end_use,
if disable uvd dpm in late init, will have no chance to
enable uvd dpm after resume until play video again.

Change-Id: I70e3d7efe63edad37f26e6c5ea089da1135c0ab5
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: simplify struct amd_pp_init.

delete the members not needed when amd_powerplay_init.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: get system info by cgs interface.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for getting sub_device id and
sub_vendor_id in cgs interface.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add vce bypass mode for tonga.

fix issue that encode test failed on the second time when
vce dpm enabled on tonga.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add bypass mode for vce 2.0.

fix issue after vce encode, the eclk stay high.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine function name for consistency

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vce3: add support for third vce ring

Not of much use at the moment (we don't really use
the second ring either), but may be useful later.

Reviewed-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: track the number of vce rings

Rather than using a hardcoded value.  This allows
different versions to expose more or less rings.

No functional change.

Reviewed-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rename suspend_kms and resume_kms

The old names were dragged over from radeon.  The new ones
better match the naming conventions used in the driver.

No functional change.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use memcpy_toio for VCE firmware upload

Try to be clean here, even when it's a noop on x86.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use memcpy_to/fromio for UVD fw upload

Also use the firmware size from the header instead of calculating it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete useless code in iceland_hwmgr.c.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: switch UVD code to use UVD_NO_OP for padding

Replace packet2's with packet0 writes to UVD_NO_OP.  The
value written to UVD_NO_OP does not matter.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch UVD code to use UVD_NO_OP for padding

Replace packet2's with packet0 writes to UVD_NO_OP.  The
value written to UVD_NO_OP does not matter.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add support for UVD_NO_OP register

Writes to this register are the preferred way to do NOPs.

Bump the driver version as well.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for UVD_NO_OP register

Writes to this register are the preferred way to do NOPs.

Bump the driver version as well.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix VCE ib alignment value

The VCE rings only require single dword alignment.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix IB alignment for UVD

According to the hw team, it should be 16, not 8.

Cc: Peter Fang <peter.fang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule()

If the ring isn't ready lets print out which ring name
to help debugging.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove dead code, si_mc_load_microcode (v2)

In an if block for (running == 0) running cannot be non-zero.

v2: agd: remove unused variable

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/cik: remove dead code (v2)

In an if block for (running == 0) running cannot be non-zero.

v2: agd: remove unused variable

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: avoid NULL dereference, cz_hwmgr.c

if (a == NULL || a->b == NULL)
leads to a NULL pointer dereference if a == NULL.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: avoid NULL pointer dereference

if (a == NULL || a->b == NULL)
leads to a NULL pointer dereference if a == NULL.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc8: remove dead code (v2)

In an if block for (running == 0) running cannot be non-zero.

v2: agd: remove unused variable

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc7: remove dead code (v2)

In an if block for (running == 0) running cannot be non-zero.

v2: agd: remove unused variable

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs()

Fixed indentation for readability.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use correct mask in dce_v8_0_afmt_setmode() and fix comment typos.

We were using the same mask twice. Looking at radeon, it seems
we should be using HDMI_AVI_INFO_CONT instead as the second mask.

Being there, fix typos in comments and improved readability.

I haven't looked at other DCEs, the mask may also be wrong for them.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup amdgpu_vm_bo_update params

Make it more obvious what we are doing here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop adding dummy entry in amdgpu_ttm_placement_init

AMDGPU_GEM_CREATE_NO_CPU_ACCESS and AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED are
obviously mutual exclusive. So stop adding a dummy entry without effect when
both are specified.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup amdgpu_ttm_placement_init

Make it more clear what this function does. No intendet functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix lru size grouping v2

Adding a BO can make it the insertion point for larger sizes as well.

v2: add a comment about the guard structure.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay:  Tidy up cz_hwmgr.c

Clean up whitespace and formatting.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add AMDGPU_INFO_NUM_EVICTIONS

For profiling.

v2: really bump the minor version

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: recover vram bo from shadow after gpu reset V2

V2:
1. don't directly submit to many jobs at the same time.
2. delete unrelated printk.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: link all shadow bo V2

V2:
1. use mutex instead of spinlock for shadow list, since its process could
sleep.
2. move list_del to bo destroy phase.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update pt shadow while updating pt V2

V2:
move shadow parameter to amdgpu_pte_update_params.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: minutemaidpark@hotmail.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update pd shadow while updating pd V2

V2:
Checking if shadow is valid.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: sync bo and shadow V3

Use shadow flag to judge which direction to sync.
V2:
Don't need bo pin, so remove it.

V3:
1. Split to two functions, one is backup_to_shadow, another is
restore_from_shadow.
2. Clean up previous shadow direction difinitions.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add direct submision option for copy_buffer

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add need backup function V2

V2:
add checking if need backup in amdgpu_bo_create.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: S3 resumed failed after 4-5 times loop

Phenomenon: software hang when device resume back, read UVD fence is 0xffffffff
and read pcie pid is 0xffff.
The issue is caused by VCE reset when update cg setting. according to HW programming
guide, adjust update VCE cg sequence.
The patch apply to VCE2.0.

Signed-off-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use domain's gpu_offset for start addr

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update gart_pin_size only if the bo is pined to GTT

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check domain sanity in amdgpu_bo_pin_restricted()

abort if the bo is pined to other domain already

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: move ttm stuff to amdgpu_ttm.h

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable power containment features for tonga.

v2: fix build error introduced when fix code style problems.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu:  Add more debugfs config data

Adds family and external_rev_id to config data

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Hardcode virtual DCE vblank / scanout position return values

For virtual display feature, by hardcoding 0 for the vblank counter and
-EINVAL for the scanout position return value, we signal to the core DRM code that there are
no hardware counters we can use for these.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add more config data for debugfs

Adds rev_id as well as cg/pg flags to help debug runtime.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix coding style in amdgpu_object.c

Just a few 80 chars problems.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add function pointer to the pte_update_params

Remember what function to call while planning the commands instead
of figuring it our later on.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop splitting PTE commands into smaller ones

It doesn't make much sense to create bigger commands first which we then need
to split into smaller one again. Just make sure the commands we create aren't
to big in the first place.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove AMDGPU_VM_NO_FLUSH define

Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup the write_pte implementations

We don't need the gart mapping handling here any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove pages_addr handling from the VM code

Not needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: write PTEs directly into the IB.

Write the PTEs at the end of the IB instead of directly into the SDMA commands.
This can save quite some CPU cycles building the entries.

This doesn't change the DW estimation because PTEs where embedded into the IB
before as well. It just moves them to the end of the IB.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add shadow flag V2

Indicate if need to sync between bo and shadow, where sync to where.
V2:
Rename to backup_shadow

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allocate shadow for pd/pt bo V2

The pd/pt shadow bo will be used to backup page table, when gpu reset
happens, we can restore the page table by them.
V2:
Free shadow bo.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: validate shadow as well when validating bo

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add shadow bo support V2

shadow bo is the shadow of a bo, which is always in GTT,
which can be used to backup the original bo.
V2:
reference shadow parent, shadow bo will be freed by who allocted him.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: UVD v6 register cleanup

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: VCE v2 register cleanup

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add mutex in check_soft for VCE v3

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Cleanup register access in VCE v3

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixing copy-paste errors and removing unneeded newlines

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Add DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags v2

These flags allow userspace to explicitly specify the target vertical
blank period when a flip should take effect.

v2:
* Add new struct drm_mode_crtc_page_flip_target instead of modifying
  struct drm_mode_crtc_page_flip, to make sure all existing userspace
  code keeps compiling (Daniel Vetter)

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Set MASTER_UPDATE_MODE to 0 again

With the previous change, it's safe to let page flips take effect
anytime during a vertical blank period.

This can avoid delaying a flip by a frame in some cases where we get to
radeon_flip_work_func -> adev->mode_info.funcs->page_flip during a
vertical blank period.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Provide page_flip_target hook

Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
radeon_flip_work_func considerably.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set MASTER_UPDATE_MODE to 0 again

With the previous change, it's safe to let page flips take effect
anytime during a vertical blank period.

This can avoid delaying a flip by a frame in some cases where we get to
amdgpu_flip_work_func -> adev->mode_info.funcs->page_flip during a
vertical blank period.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Provide page_flip_target hook

Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
amdgpu_flip_work_func considerably.

agd: update dce_virtual.c as well.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Add page_flip_target CRTC hook v2

Mostly the same as the existing page_flip hook, but takes an additional
parameter specifying the target vertical blank period when the flip
should take effect.

v2:
* Add curly braces around else statement corresponding to an if block
  with curly braces (Alex Deucher)
* Call drm_crtc_vblank_put in the error case (Daniel Vetter)
* Clarify entry point documentation comment (Daniel Vetter)

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: radeon: radeon_i2c: don't print error when adding adapter fails

The core will do this for us now.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: amd: amdgpu: amdgpu_i2c: don't print error when adding adapter fails

The core will do this for us now.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use more than 64KB fragment size if possible

We align to 64KB, but when userspace aligns even more we can easily use more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: flip frag_ptes and update_pts

We can add the fragment params before we split the update for the page tables.
That should save a few CPU cycles for larger updates.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add adev to the pte_update_params

No need to carry that forward as a separate parameter.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rename amdgpu_vm_update_params

Well those are actually page table entry parameters.
This also makes the variable names used a bit shorter.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup VM fragment defines

We can actually do way more than just the 64KB we currently used as default.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused VM defines

Not used for a long time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Simplify bitfield operations in gfx v8

This patch introduces a new macro WREG32_FIELD which is used
to write to a register with a new value in a field.  It's designed
to replace the pattern:

tmp = RREG32(mmFoo);
tmp &= ~REG__FIELD_MASK;
tmp |= new_value << REG__FIELD__SHIFT;
WREG32(mmFoo, tmp)

with:

WREG32_FIELD(Foo, FIELD, new_value);

Unlike WREG32_P() it understands offsets/masks and doesn't
require the caller to shift the value (or mask properly).

It's applied where suitable in the gfx_v8_0.c driver to start
with.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Simplify various gfx v8 functions

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Correct whitespace in GFX v8

Fix various whitespace issues in gfx v8 driver.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change the virtual_display type from int to char*.

For virtual display feature, as there may be multiple GPUs,
for user could choose whiche GPU need to enable this feature, change
the type of virtual_display from int to char*. The variable will be set
like this virtual_display="xxxx:xx:xx.x;xxxx:xx:xx.x;".

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add virtual dce support for iceland

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virtual_dce: add case for topaz for disable_dce

This asic has no DCE block.  Also clarify the error message
for unmatched chips.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move vsync_timer_enabled setup to dce virtual early_init

Put it in one place.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set ip_blocks according variable amdgpu_virtual_display.

For virtual display feature, if user set the option "amdgpu.virtual_display=1"
when load amdgpu.ko. Then need to set the ip_blocks with virtual display ip
blocks. And when enable virtual display, the amdgpu_dal need to be set to zero.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Define one variable for virtual display.

For virtual display feature, define on variable in amdgpu.ko. When want to
enable virtual display feature, need set the option "amdgpu.virtual_display=1".
And then disable vga render and crtc if have DCE engine.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Define virtual display ip blocks.

For virtual display feature, define virtual display ip blocks, and set
dce_virtual_ip_funcs to DCE block.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add DRM_MODE_CONNECTOR_VIRTUAL connector in amdgpu_connector_add.

For virtual display feature, add one connector type in amdgpu_connector_add.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Call pageflip irq funtion when receiced vsync interrupt.

For virtual display feature, as there is no dce engine, so no pageflip irq
generated. So directly call pageflip irq funtion when received vysn interrupt.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>