drivers/isdn/gigaset/common.c: Remove useless kfree

Remove useless kfree() and clean up code related to the removal.

The semantic patch that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
position p1,p2;
expression x;
@@

if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; }

@unchanged exists@
position r.p1,r.p2;
expression e <= r.x,x,e1;
iterator I;
statement S;
@@

if (x@p1 == NULL) { ... when != I(x,...) S
                        when != e = e1
                        when != e += e1
                        when != e -= e1
                        when != ++e
                        when != --e
                        when != e++
                        when != e--
                        when != &e
   kfree@p2(x); ... return ...; }

@ok depends on unchanged exists@
position any r.p1;
position r.p2;
expression x;
@@

... when != true x@p1 == NULL
kfree@p2(x);

@depends on !ok && unchanged@
position r.p2;
expression x;
@@

*kfree@p2(x);
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: replace write lock with read lock when get route info

geting route info does not write rt->rt6i_table, so replace
write lock with read lock

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: route templates can be const

We kmemdup() templates, so they can be const.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Compare addresses only bits up to the prefix length (RFC6724).

Compare bits up to the source address's prefix length only to
allows DNS load balancing to continue to be used as a tie breaker.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Add labels for site-local and 6bone testing addresses (RFC6724)

Added labels for site-local addresses (fec0::/10) and 6bone testing
addresses (3ffe::/16) in order to depreference them.

Note that the RFC introduced new rows for Teredo, ULA and 6to4 addresses
in the default policy table.  Some of them have different labels from ours.
For backward compatibility, we do not change the "default" labels.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

scsi_netlink: Remove dead and buggy code

The scsi netlink code confuses the netlink port id with a process id,
going so far as to read NETLINK_CREDS(skb)->pid instead of the correct
NETLINK_CB(skb).pid.  Fortunately it does not matter because nothing
registers to respond to scsi netlink requests.

The only interesting use of the scsi_netlink interface is
fc_host_post_vendor_event which sends a netlink multicast message.

Since nothing registers to handle scsi netlink messages kill all of the
registration logic, while retaining the same error handling behavior
preserving the userspace visible behavior and removing all of the
confused code that thought a netlink port id was a process id.

This was tested with a kernel allyesconfig build which had no problems.

Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: James Smart <James.Smart@Emulex.Com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netprio_cgroup: Use memcpy instead of the for-loop to copy priomap

Replace the current (inefficient) for-loop with memcpy, to copy priomap.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netprio_cgroup: Remove update_netdev_tables() since it is unnecessary

The update_netdev_tables() function appears to be unnecessary, since the
write_update_netdev_table() function will adjust the priomaps as and when
required anyway. So drop the usage of update_netdev_tables() entirely.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Utilize Link Flap Avoidance

Change various flows in the bnx2x driver which up until now flapped
the link - these flows now benefit from the link flap avoidance mechanism.

This includes the removal of the link reset made upon nic init, as it is
possible the link is already active at that time.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Link Flap Avoidance

Various flows in the bnx2x driver cause a link-flap - if the link
is up, it would be toggled down (after a mac/phy reset) and then
taken back up.

In many of these cases, there is no need to do cause such a flap,
as the associated flows should not actually affect the link.

This patch adds the 'Link Flap Avoidance' mechanism, which allows
the driver to better determine if a given flow requires a link change,
and thus minimize the number of link flaps caused by the driver.

Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: link code refactoring

Separate the interrupt setting part of each external PHY to a specific
function.
This allows calling the interrupt setting in case of link-flap avoidance,
since some link owners may not enable the interrupt on their own.

Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://1984.lsi.us.es/nf-next

Pablo Neira Ayuso says:

====================
The following patchset contains four Netfilter updates, mostly targeting
to fix issues added with IPv6 NAT, and one little IPVS update for net-next:

* Remove unneeded conditional free of skb in nfnetlink_queue, from
  Wei Yongjun.

* One semantic path from coccinelle detected the use of list_del +
  INIT_LIST_HEAD, instead of list_del_init, again from Wei Yongjun.

* Fix out-of-bound memory access in the NAT address selection, from
  Florian Westphal. This was introduced with the IPv6 NAT patches.

* Two fixes for crashes that were introduced in the recently merged
  IPv6 NAT support, from myself.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ctnetlink: fix module auto-load in ctnetlink_parse_nat

(c7232c9 netfilter: add protocol independent NAT core) added
incorrect locking for the module auto-load case in ctnetlink_parse_nat.

That function is always called from ctnetlink_create_conntrack which
requires no locking.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

x86 bpf_jit: support MOD operation

commit b6069a9570 (filter: add MOD operation) added generic
support for modulus operation in BPF.

This patch brings JIT support for x86_64

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: George Bakos <gbakos@alpinista.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: use native EEE instead of auto-greeen

This patch enables boards with 54618SE phys and a sufficiently new
firmware to use native EEE instead of auto-greeen.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: correct & clean 10G EEE requirements

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: EEE code refactoring

In order to lay the foundation for 1G EEE support, several segments of code
which are common to both 1G and 10G EEE configurations were extracted from
the 10G EEE configuration flow to their own functions.
E.g., bnx2x_eee_initial_config, bnx2x_eee_advertise, bnx2x_eee_disable, etc.

The rest of the EEE functions were relocated and placed in a single,
continuous section of the file.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: add EEE support for 4-port devices

Prevent functions from disabling EEE to other functions using other ports.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: EEE status is read locally

This patch aligns the EEE status with that of all other link properties,
by changing the way its accessed - instead of a direct read to the shared
memory, each function maintain its own copy locally.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: remove some useless RCU read lock

After this commit:
commit 97cac0821af4474ec4ba3a9e7a36b98ed9b6db88
Author: David S. Miller <davem@davemloft.net>
Date:   Mon Jul 2 22:43:47 2012 -0700

    ipv6: Store route neighbour in rt6_info struct.

we no longer use RCU to protect route neighbour.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

etherdevice: introduce help function eth_zero_addr()

a lot of code has either the memset or an inefficient copy
from a static array that contains the all-zeros Ethernet address.
Introduce help function eth_zero_addr() to fill an address with
all zeros, making the code clearer and allowing us to get rid of
some constant arrays.

Signed-off-by: Duan Jiong <djduanjiong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Allocate UIO resources only on devices that support iSCSI.

Update version to 2.5.13.

Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Allocate kcq resource only on devices that support FCoE.

To save memory and to exit IRQ loop quicker on devices that don't support
FCoE.

Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Add function pointers to arm IRQ for different devices.

This will make it easier to exit IRQ loop and re-arm IRQ on devices that
don't support FCoE.

Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Free UIO rings when the device is closed.

This will free up unneeded memory.

Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Add functions to allocate and free UIO rings

These functions are needed to free up memory when the rings are no longer
needed.

Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

filter: add MOD operation

Add a new ALU opcode, to compute a modulus.

Commit ffe06c17afbbb used an ancillary to implement XOR_X,
but here we reserve one of the available ALU opcode to implement both
MOD_X and MOD_K

Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: George Bakos <gbakos@alpinista.org>
Cc: Jay Schulist <jschlst@samba.org>
Cc: Jiri Pirko <jpirko@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: Report user triggered expirations against the users socket

When a policy expiration is triggered from user space the request
travels through km_policy_expired and ultimately into
xfrm_exp_policy_notify which calls build_polexpire.  build_polexpire
uses the netlink port passed to km_policy_expired as the source port for
the netlink message it builds.

When a state expiration is triggered from user space the request travles
through km_state_expired and ultimately into xfrm_exp_state_notify which
calls build_expire.  build_expire uses the netlink port passed to
km_state_expired as the source port for the netlink message it builds.

Pass nlh->nlmsg_pid from the user generated netlink message that
requested the expiration to km_policy_expired and km_state_expired
instead of current->pid which is not a netlink port number.

Cc: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: Rename pid to portid to avoid confusion

It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipvs: use list_del_init instead of list_del/INIT_LIST_HEAD

Using list_del_init() instead of list_del() + INIT_LIST_HEAD().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nfnetlink_queue: remove pointless conditional before kfree_skb()

Remove pointless conditional before kfree_skb().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_nat: fix out-of-bounds access in address selection

include/linux/jhash.h:138:16: warning: array subscript is above array bounds
[jhash2() expects the number of u32 in the key]

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netlink: hide struct module parameter in netlink_kernel_create

This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).

Suggested by David S. Miller.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: kill netlink_set_nonroot

Replace netlink_set_nonroot by one new field `flags' in
struct netlink_kernel_cfg that is passed to netlink_kernel_create.

This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since
now the flags field in nl_table is generic (so we can add more
flags if needed in the future).

Also adjust all callers in the net-next tree to use these flags
instead of netlink_set_nonroot.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev/phy: mdio-mux-mmioreg.c should include of_address.h

mdio-mux-mmioreg.c uses function of_address_to_resource(), which is defined
in linux/of_address.h.  This fixes a compilation error:

drivers/net/phy/mdio-mux-mmioreg.c: In function 'mdio_mux_mmioreg_probe':
drivers/net/phy/mdio-mux-mmioreg.c:83:2: error: implicit declaration of
function 'of_address_to_resource'

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rt_cache_flush() cleanup

We dont use jhash anymore since route cache removal,
so we can get rid of get_random_bytes() calls for rt_genid
changes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qmi_wwan: use a single bind function for all device types

Refactoring the bind code lets us use a common driver_info struct
for all supported devices, simplifying the code a bit.  The
real advantage is that devices using the CDC ECM interface
layout now also can be added dynamically using the new_id sysfs
interface.  This simplifies testing of new devices.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qmi_wwan: increase max QMI message size to 4096

QMI requests exceeding 1500 bytes are possible and
device firmware does not handle fragmented messages
very well.  It is therefore necessary to increase
the maximum message size from the current 512 bytes.

The protocol message size limit is not documented
in any publicly known source, but the out of tree
driver from CodeAurora use 4 kB.  This is therefore
chosen as the new arbitrary default until the real
limit is known.

This should allow any QMI message to be transmitted
without fragmentation, fixing known issues with GPS
assistance data upload.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4/route: arg delay is useless in rt_cache_flush()

Since route cache deletion (89aef8921bfbac22f), delay is no
more used. Remove it.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

scm: Don't use struct ucred in NETLINK_CB and struct scm_cookie.

Passing uids and gids on NETLINK_CB from a process in one user
namespace to a process in another user namespace can result in the
wrong uid or gid being presented to userspace.  Avoid that problem by
passing kuids and kgids instead.

- define struct scm_creds for use in scm_cookie and netlink_skb_parms
  that holds uid and gid information in kuid_t and kgid_t.

- Modify scm_set_cred to fill out scm_creds by heand instead of using
  cred_to_ucred to fill out struct ucred.  This conversion ensures
  userspace does not get incorrect uid or gid values to look at.

- Modify scm_recv to convert from struct scm_creds to struct ucred
  before copying credential values to userspace.

- Modify __scm_send to populate struct scm_creds on in the scm_cookie,
  instead of just copying struct ucred from userspace.

- Modify netlink_sendmsg to copy scm_creds instead of struct ucred
  into the NETLINK_CB.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

igmp: avoid drop_monitor false positives

igmp should call consume_skb() for all correctly processed packets,
to avoid false dropwatch/drop_monitor false positives.

Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/sierra_net.c: removes unnecessary semicolon

removes unnecessary semicolon

Found by Coccinelle: http://coccinelle.lip6.fr/

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: fix handling of throw routes

It's the same problem that previous fix about blackhole and prohibit routes.

When adding a throw route, it was handled like a classic route.
Moreover, it was only possible to add this kind of routes by specifying
an interface.

Before the patch:
  $ ip route add throw 2001::2/128
  RTNETLINK answers: No such device
  $ ip route add throw 2001::2/128 dev eth0
  $ ip -6 route | grep 2001::2
  2001::2 dev eth0  metric 1024

After:
  $ ip route add throw 2001::2/128
  $ ip -6 route | grep 2001::2
  throw 2001::2 dev lo  metric 1024  error -11

Reported-by: Markus Stenberg <markus.stenberg@iki.fi>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix TFO regression

Fengguang Wu reported various panics and bisected to commit
8336886f786fdac (tcp: TCP Fast Open Server - support TFO listeners)

Fix this by making sure socket is a TCP socket before accessing TFO data
structures.

[  233.046014] kfree_debugcheck: out of range ptr ea6000000bb8h.
[  233.047399] ------------[ cut here ]------------
[  233.048393] kernel BUG at /c/kernel-tests/src/stable/mm/slab.c:3074!
[  233.048393] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
[  233.048393] Modules linked in:
[  233.048393] CPU 0
[  233.048393] Pid: 3929, comm: trinity-watchdo Not tainted 3.6.0-rc3+
#4192 Bochs Bochs
[  233.048393] RIP: 0010:[<ffffffff81169653>]  [<ffffffff81169653>]
kfree_debugcheck+0x27/0x2d
[  233.048393] RSP: 0018:ffff88000facbca8  EFLAGS: 00010092
[  233.048393] RAX: 0000000000000031 RBX: 0000ea6000000bb8 RCX:
00000000a189a188
[  233.048393] RDX: 000000000000a189 RSI: ffffffff8108ad32 RDI:
ffffffff810d30f9
[  233.048393] RBP: ffff88000facbcb8 R08: 0000000000000002 R09:
ffffffff843846f0
[  233.048393] R10: ffffffff810ae37c R11: 0000000000000908 R12:
0000000000000202
[  233.048393] R13: ffffffff823dbd5a R14: ffff88000ec5bea8 R15:
ffffffff8363c780
[  233.048393] FS:  00007faa6899c700(0000) GS:ffff88001f200000(0000)
knlGS:0000000000000000
[  233.048393] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  233.048393] CR2: 00007faa6841019c CR3: 0000000012c82000 CR4:
00000000000006f0
[  233.048393] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[  233.048393] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[  233.048393] Process trinity-watchdo (pid: 3929, threadinfo
ffff88000faca000, task ffff88000faec600)
[  233.048393] Stack:
[  233.048393]  0000000000000000 0000ea6000000bb8 ffff88000facbce8
ffffffff8116ad81
[  233.048393]  ffff88000ff588a0 ffff88000ff58850 ffff88000ff588a0
0000000000000000
[  233.048393]  ffff88000facbd08 ffffffff823dbd5a ffffffff823dbcb0
ffff88000ff58850
[  233.048393] Call Trace:
[  233.048393]  [<ffffffff8116ad81>] kfree+0x5f/0xca
[  233.048393]  [<ffffffff823dbd5a>] inet_sock_destruct+0xaa/0x13c
[  233.048393]  [<ffffffff823dbcb0>] ? inet_sk_rebuild_header
+0x319/0x319
[  233.048393]  [<ffffffff8231c307>] __sk_free+0x21/0x14b
[  233.048393]  [<ffffffff8231c4bd>] sk_free+0x26/0x2a
[  233.048393]  [<ffffffff825372db>] sctp_close+0x215/0x224
[  233.048393]  [<ffffffff810d6835>] ? lock_release+0x16f/0x1b9
[  233.048393]  [<ffffffff823daf12>] inet_release+0x7e/0x85
[  233.048393]  [<ffffffff82317d15>] sock_release+0x1f/0x77
[  233.048393]  [<ffffffff82317d94>] sock_close+0x27/0x2b
[  233.048393]  [<ffffffff81173bbe>] __fput+0x101/0x20a
[  233.048393]  [<ffffffff81173cd5>] ____fput+0xe/0x10
[  233.048393]  [<ffffffff810a3794>] task_work_run+0x5d/0x75
[  233.048393]  [<ffffffff8108da70>] do_exit+0x290/0x7f5
[  233.048393]  [<ffffffff82707415>] ? retint_swapgs+0x13/0x1b
[  233.048393]  [<ffffffff8108e23f>] do_group_exit+0x7b/0xba
[  233.048393]  [<ffffffff8108e295>] sys_exit_group+0x17/0x17
[  233.048393]  [<ffffffff8270de10>] tracesys+0xdd/0xe2
[  233.048393] Code: 59 01 5d c3 55 48 89 e5 53 41 50 0f 1f 44 00 00 48
89 fb e8 d4 b0 f0 ff 84 c0 75 11 48 89 de 48 c7 c7 fc fa f7 82 e8 0d 0f
57 01 <0f> 0b 5f 5b 5d c3 55 48 89 e5 0f 1f 44 00 00 48 63 87 d8 00 00
[  233.048393] RIP  [<ffffffff81169653>] kfree_debugcheck+0x27/0x2d
[  233.048393]  RSP <ffff88000facbca8>

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Tested-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "H.K. Jerry Chu" <hkchu@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: fix handling of blackhole and prohibit routes

When adding a blackhole or a prohibit route, they were handling like classic
routes. Moreover, it was only possible to add this kind of routes by specifying
an interface.

Bug already reported here:
  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498498

Before the patch:
  $ ip route add blackhole 2001::1/128
  RTNETLINK answers: No such device
  $ ip route add blackhole 2001::1/128 dev eth0
  $ ip -6 route | grep 2001
  2001::1 dev eth0  metric 1024

After:
  $ ip route add blackhole 2001::1/128
  $ ip -6 route | grep 2001
  blackhole 2001::1 dev lo  metric 1024  error -22

v2: wrong patch
v3: add a field fc_type in struct fib6_config to store RTN_* type

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: use PCIe AER capability

This patch allows code to handle the PCIe AER capability.
The PCI callbacks for error handling/reset/recovery already exist in be2net
and have been tested with EEH/ppc.
This patch has been tested using the aer-inject tool.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qdisc busylock needs lockdep annotations

It seems we need to provide ability for stacked devices
to use specific lock_class_key for sch->busylock

We could instead default l2tpeth tx_queue_len to 0 (no qdisc), but
a user might use a qdisc anyway.

(So same fixes are probably needed on non LLTX stacked drivers)

Noticed while stressing L2TPV3 setup :

======================================================
 [ INFO: possible circular locking dependency detected ]
 3.6.0-rc3+ #788 Not tainted
 -------------------------------------------------------
 netperf/4660 is trying to acquire lock:
  (l2tpsock){+.-...}, at: [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]

 but task is already holding lock:
  (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&(&sch->busylock)->rlock){+.-...}:
        [<ffffffff810a5df0>] lock_acquire+0x90/0x200
        [<ffffffff817499fc>] _raw_spin_lock_irqsave+0x4c/0x60
        [<ffffffff81074872>] __wake_up+0x32/0x70
        [<ffffffff8136d39e>] tty_wakeup+0x3e/0x80
        [<ffffffff81378fb3>] pty_write+0x73/0x80
        [<ffffffff8136cb4c>] tty_put_char+0x3c/0x40
        [<ffffffff813722b2>] process_echoes+0x142/0x330
        [<ffffffff813742ab>] n_tty_receive_buf+0x8fb/0x1230
        [<ffffffff813777b2>] flush_to_ldisc+0x142/0x1c0
        [<ffffffff81062818>] process_one_work+0x198/0x760
        [<ffffffff81063236>] worker_thread+0x186/0x4b0
        [<ffffffff810694d3>] kthread+0x93/0xa0
        [<ffffffff81753e24>] kernel_thread_helper+0x4/0x10

 -> #0 (l2tpsock){+.-...}:
        [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10
        [<ffffffff810a5df0>] lock_acquire+0x90/0x200
        [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50
        [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
        [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth]
        [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70
        [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290
        [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00
        [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890
        [<ffffffff815db019>] ip_output+0x59/0xf0
        [<ffffffff815da36d>] ip_local_out+0x2d/0xa0
        [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680
        [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60
        [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30
        [<ffffffff815f5300>] tcp_push_one+0x30/0x40
        [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040
        [<ffffffff81614495>] inet_sendmsg+0x125/0x230
        [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0
        [<ffffffff81579ece>] sys_sendto+0xfe/0x130
        [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b
  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&(&sch->busylock)->rlock);
                                lock(l2tpsock);
                                lock(&(&sch->busylock)->rlock);
   lock(l2tpsock);

  *** DEADLOCK ***

 5 locks held by netperf/4660:
  #0:  (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e581c>] tcp_sendmsg+0x2c/0x1040
  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff815da3e0>] ip_queue_xmit+0x0/0x680
  #2:  (rcu_read_lock_bh){.+....}, at: [<ffffffff815d9ac5>] ip_finish_output+0x135/0x890
  #3:  (rcu_read_lock_bh){.+....}, at: [<ffffffff81595820>] dev_queue_xmit+0x0/0xe00
  #4:  (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00

 stack backtrace:
 Pid: 4660, comm: netperf Not tainted 3.6.0-rc3+ #788
 Call Trace:
  [<ffffffff8173dbf8>] print_circular_bug+0x1fb/0x20c
  [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10
  [<ffffffff810a334b>] ? check_usage+0x9b/0x4d0
  [<ffffffff810a3f44>] ? __lock_acquire+0x2e4/0x1b10
  [<ffffffff810a5df0>] lock_acquire+0x90/0x200
  [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
  [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50
  [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
  [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
  [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth]
  [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70
  [<ffffffff81594e0e>] ? dev_hard_start_xmit+0x5e/0xa70
  [<ffffffff81595961>] ? dev_queue_xmit+0x141/0xe00
  [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290
  [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00
  [<ffffffff81595820>] ? dev_hard_start_xmit+0xa70/0xa70
  [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890
  [<ffffffff815d9ac5>] ? ip_finish_output+0x135/0x890
  [<ffffffff815db019>] ip_output+0x59/0xf0
  [<ffffffff815da36d>] ip_local_out+0x2d/0xa0
  [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680
  [<ffffffff815da3e0>] ? ip_local_out+0xa0/0xa0
  [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60
  [<ffffffff815fa25e>] ? tcp_md5_do_lookup+0x18e/0x1a0
  [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30
  [<ffffffff815f5300>] tcp_push_one+0x30/0x40
  [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040
  [<ffffffff81614495>] inet_sendmsg+0x125/0x230
  [<ffffffff81614370>] ? inet_create+0x6b0/0x6b0
  [<ffffffff8157e6e2>] ? sock_update_classid+0xc2/0x3b0
  [<ffffffff8157e750>] ? sock_update_classid+0x130/0x3b0
  [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0
  [<ffffffff81162579>] ? fget_light+0x3f9/0x4f0
  [<ffffffff81579ece>] sys_sendto+0xfe/0x130
  [<ffffffff810a69ad>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffff8174a0b0>] ? _raw_spin_unlock_irq+0x30/0x50
  [<ffffffff810757e3>] ? finish_task_switch+0x83/0xf0
  [<ffffffff810757a6>] ? finish_task_switch+0x46/0xf0
  [<ffffffff81752cb7>] ? sysret_check+0x1b/0x56
  [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: use list_move_tail instead of list_del/list_add_tail

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ipv6: using csum_ipv6_magic requires net/ip6_checksum.h

Fixes this build error:

net/ipv6/netfilter/nf_nat_l3proto_ipv6.c: In function 'nf_nat_ipv6_csum_recalc':
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:144:4: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: Remove duplicate register definitions

Removed duplicate definition for SGE_PF_KDOORBELL, SGE_INT_ENABLE3,
PCIE_MEM_ACCESS_OFFSET registers.
Moved the register field definitions around the register definition.

Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Reviewed-by: Sivakumar Subramani <sivasu@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RDMA/cxgb4: Update RDMA/cxgb4 due to macro definition removal in cxgb4 driver

cxgb4 driver has duplicate definitions of registers which will be removed. This
patch updates the RDMA/cxgb4 driver accordingly.

Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Reviewed-by: Sivakumar Subramani <sivasu@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: add unknown state to sysfs NIC duplex export

Currently when the NIC duplex state is DUPLEX_UNKNOWN it is exported as
full through sysfs, this patch adds support for DUPLEX_UNKNOWN. It is
handled the same way as in ethtool.

Signed-off-by: Nikolay Aleksandrov <naleksan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "usbnet: drop unneeded check for NULL"

This reverts commit 5d65878d7031b6c39054b282faceff406bb2fda9.
The upper layers call usbnet_start_xmit() with a valid skb.
However cdc_ncm abuses this method by calling it with NULL
to trigger IO for the aggregated private skb holding erlier
packets. Until cdc_ncm is fixed, the check for NULL must
be reintroduced.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: add generic netlink support for tcp_metrics

Add support for genl "tcp_metrics". No locking
is changed, only that now we can unlink and delete
entries after grace period. We implement get/del for
single entry and dump to support show/flush filtering
in user space. Del without address attribute causes
flush for all addresses, sadly under genl_mutex.

v2:
- remove rcu_assign_pointer as suggested by Eric Dumazet,
it is not needed because there are no other writes under lock
- move the flushing code in tcp_metrics_flush_all

v3:
- remove synchronize_rcu on flush as suggested by Eric Dumazet

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: fix crash during boot if NAT has been compiled built-in

(c7232c9 netfilter: add protocol independent NAT core) introduced a
problem that leads to crashing during boot due to NULL pointer
dereference. It seems that xt_nat calls xt_register_target() before
xt_init():

net/netfilter/x_tables.c:static struct xt_af *xt; is NULL and we crash on
xt_register_target(struct xt_target *target)
{
        u_int8_t af = target->family;
        int ret;

        ret = mutex_lock_interruptible(&xt[af].mutex);
...

Fix this by changing the linking order, to make sure that x_tables
comes before xt_nat.

Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ixgbe: remove old init remnant

Remove a for loop that does nothing in ixgbe_probe().
This is a remnant from when we had IO bars (compare to the ixgb code).

Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: Supported and Advertised Pause Frame

This patch add ethtool supports for Supported and Advertised Pause Frame,
based on Adapter Flow Control settings.

Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: reduce Rx header size

Reduce skb truesize by 256 bytes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: Add loopback test support for i210

Early release of i210 devices had the loopback test of the ethtool
self-test disabled. This patch enables the loopback test for i210 devices.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

net: Providing protocol type via system.sockprotoname xattr of /proc/PID/fd entries

lsof reports some of socket descriptors as "can't identify protocol" like:

    [yamato@localhost]/tmp% sudo lsof | grep dbus | grep iden
    dbus-daem   652          dbus    6u     sock ... 17812 can't identify protocol
    dbus-daem   652          dbus   34u     sock ... 24689 can't identify protocol
    dbus-daem   652          dbus   42u     sock ... 24739 can't identify protocol
    dbus-daem   652          dbus   48u     sock ... 22329 can't identify protocol
    ...

lsof cannot resolve the protocol used in a socket because procfs
doesn't provide the map between inode number on sockfs and protocol
type of the socket.

For improving the situation this patch adds an extended attribute named
'system.sockprotoname' in which the protocol name for
/proc/PID/fd/SOCKET is stored. So lsof can know the protocol for a
given /proc/PID/fd/SOCKET with getxattr system call.

A few weeks ago I submitted a patch for the same purpose. The patch
was introduced /proc/net/sockfs which enumerates inodes and protocols
of all sockets alive on a system. However, it was rejected because (1)
a global lock was needed, and (2) the layout of struct socket was
changed with the patch.

This patch doesn't use any global lock; and doesn't change the layout
of any structs.

In this patch, a protocol name is stored to dentry->d_name of sockfs
when new socket is associated with a file descriptor. Before this
patch dentry->d_name was not used; it was just filled with empty
string. lsof may use an extended attribute named
'system.sockprotoname' to retrieve the value of dentry->d_name.

It is nice if we can see the protocol name with ls -l
/proc/PID/fd. However, "socket:[#INODE]", the name format returned
from sockfs_dname() was already defined. To keep the compatibility
between kernel and user land, the extended attribute is used to
prepare the value of dentry->d_name.

Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/jesse/openvswitch

ieee802154: MRF24J40 driver

Driver for the Microchip MRF24J40 802.15.4 WPAN module.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Add INET dependency on aes crypto for the sake of TCP fastopen.

Stephen Rothwell says:

====================
After merging the final tree, today's linux-next build (powerpc
ppc44x_defconfig) failed like this:

net/built-in.o: In function `tcp_fastopen_ctx_free':
tcp_fastopen.c:(.text+0x5cc5c): undefined reference to `crypto_destroy_tfm'
net/built-in.o: In function `tcp_fastopen_reset_cipher':
(.text+0x5cccc): undefined reference to `crypto_alloc_base'
net/built-in.o: In function `tcp_fastopen_reset_cipher':
(.text+0x5cd6c): undefined reference to `crypto_destroy_tfm'

Presumably caused by commit 104671636897 ("tcp: TCP Fast Open Server -
header & support functions") from the net-next tree.  I assume that some
dependency on the CRYPTO infrastructure is missing.

I have reverted commit 1bed966cc3bd ("Merge branch
'tcp_fastopen_server'") for today.
====================

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: use list_move_tail instead of list_del/list_add_tail

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

usbnet: drop unneeded check for NULL

usbnet_start_xmit() is always called with a valid skb

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: Increase maximum number of datapath ports.

Use hash table to store ports of datapath. Allow 64K ports per switch.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Merge branch 'master' of git://1984.lsi.us.es/nf-next

tcp: use PRR to reduce cwin in CWR state

Use proportional rate reduction (PRR) algorithm to reduce cwnd in CWR state,
in addition to Recovery state. Retire the current rate-halving in CWR.
When losses are detected via ACKs in CWR state, the sender enters Recovery
state but the cwnd reduction continues and does not restart.

Rename and refactor cwnd reduction functions since both CWR and Recovery
use the same algorithm:
tcp_init_cwnd_reduction() is new and initiates reduction state variables.
tcp_cwnd_reduction() is previously tcp_update_cwnd_in_recovery().
tcp_ends_cwnd_reduction() is previously  tcp_complete_cwr().

The rate halving functions and logic such as tcp_cwnd_down(), tcp_min_cwnd(),
and the cwnd moderation inside tcp_enter_cwr() are removed. The unused
parameter, flag, in tcp_cwnd_reduction() is also removed.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: move tcp_update_cwnd_in_recovery

To prepare replacing rate halving with PRR algorithm in CWR state.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: move tcp_enter_cwr()

To prepare replacing rate halving with PRR algorithm in CWR state.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sierra_net: rx_urb_size is constant

The rx_urb_size is set to the same value for every device
supported by this driver.  No need to keep a per-device
data structure to do that. Replacing with a macro constant.

This was the last device specific info, and removing it
allows us to delete the sierra_net_info_data struct.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sierra_net: make private symbols static

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cx82310_eth: use common match macro

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net-next

This merges (3f509c6 netfilter: nf_nat_sip: fix incorrect handling
of EBUSY for RTCP expectation) to Patrick McHardy's IPv6 NAT changes.

netfilter: properly annotate ipv4_netfilter_{init,fini}()

Despite being just a few bytes of code, they should still have proper
annotations.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: pass 'nf_hook_ops' instead of 'list_head' to nf_queue()

Since 'list_for_each_continue_rcu' has already been replaced by
'list_for_each_entry_continue_rcu', pass 'list_head' to nf_queue() as a
parameter can not benefit us any more.

This patch will replace 'list_head' with 'nf_hook_ops' as the parameter of
nf_queue() and __nf_queue() to save code.

Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: pass 'nf_hook_ops' instead of 'list_head' to nf_iterate()

Since 'list_for_each_continue_rcu' has already been replaced by
'list_for_each_entry_continue_rcu', pass 'list_head' to nf_iterate() as a
parameter can not benefit us any more.

This patch will replace 'list_head' with 'nf_hook_ops' as the parameter of
nf_iterate() to save code.

Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: remove xt_NOTRACK

It was scheduled to be removed for a long time.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netfilter@vger.kernel.org
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack: add nf_ct_timeout_lookup

This patch adds the new nf_ct_timeout_lookup function to encapsulate
the timeout policy attachment that is called in the nf_conntrack_in
path.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: xt_CT: refactorize xt_ct_tg_check

This patch adds xt_ct_set_helper and xt_ct_set_timeout to reduce
the size of xt_ct_tg_check.

This aims to improve code mantainability by splitting xt_ct_tg_check
in smaller chunks.

Suggested by Eric Dumazet.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: xt_socket: fix compilation warnings with gcc 4.7

This patch fixes compilation warnings in xt_socket with gcc-4.7.

In file included from net/netfilter/xt_socket.c:22:0:
net/netfilter/xt_socket.c: In function ‘socket_mt6_v1’:
include/net/netfilter/nf_tproxy_core.h:175:23: warning: ‘sport’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:265:16: note: ‘sport’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
include/net/netfilter/nf_tproxy_core.h:175:23: warning: ‘dport’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:265:9: note: ‘dport’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
include/net/netfilter/nf_tproxy_core.h:175:6: warning: ‘saddr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:264:27: note: ‘saddr’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
include/net/netfilter/nf_tproxy_core.h:175:6: warning: ‘daddr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:264:19: note: ‘daddr’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
net/netfilter/xt_socket.c: In function ‘socket_match.isra.4’:
include/net/netfilter/nf_tproxy_core.h:75:2: warning: ‘protocol’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:113:5: note: ‘protocol’ was declared here
In file included from include/net/tcp.h:37:0,
                 from net/netfilter/xt_socket.c:17:
include/net/inet_hashtables.h:356:45: warning: ‘sport’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:112:16: note: ‘sport’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
include/net/netfilter/nf_tproxy_core.h:106:23: warning: ‘dport’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:112:9: note: ‘dport’ was declared here
In file included from include/net/tcp.h:37:0,
                 from net/netfilter/xt_socket.c:17:
include/net/inet_hashtables.h:356:15: warning: ‘saddr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:111:16: note: ‘saddr’ was declared here
In file included from include/net/tcp.h:37:0,
                 from net/netfilter/xt_socket.c:17:
include/net/inet_hashtables.h:356:15: warning: ‘daddr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:111:9: note: ‘daddr’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
net/netfilter/xt_socket.c: In function ‘socket_mt6_v1’:
include/net/netfilter/nf_tproxy_core.h:175:23: warning: ‘sport’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:268:16: note: ‘sport’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
include/net/netfilter/nf_tproxy_core.h:175:23: warning: ‘dport’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:268:9: note: ‘dport’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
include/net/netfilter/nf_tproxy_core.h:175:6: warning: ‘saddr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:267:27: note: ‘saddr’ was declared here
In file included from net/netfilter/xt_socket.c:22:0:
include/net/netfilter/nf_tproxy_core.h:175:6: warning: ‘daddr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/xt_socket.c:267:19: note: ‘daddr’ was declared here

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

6lowpan: handle NETDEV_UNREGISTER event

Before, it was impossible to remove a wpan device which had lowpan
attached to it.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@tempietto.lan>

6lowpan: Make a copy of skb's delivered to 6lowpan

Since lowpan_process_data() modifies the skb (by calling skb_pull()), we
need our own copy so that it doesn't affect the data received by other
protcols (in this case, af_ieee802154).

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@tempietto.lan>

Merge branch 'tcp_fastopen_server'

Jerry Chu says:

====================
This patch series provides the server (passive open) side code
for TCP Fast Open. Together with the earlier client side patches
it completes the TCP Fast Open implementation.

The server side Fast Open code accepts data carried in the SYN
packet with a valid Fast Open cookie, and passes it to the
application right away, allowing application to send back response
data, all before TCP's 3-way handshake finishes.

A simple cookie scheme together with capping the number of
outstanding TFO requests (still in TCP_SYN_RECV state) to a limit
per listener forms the main line of defense against spoofed SYN
attacks.

For more details about TCP Fast Open see our IETF internet draft
at http://www.ietf.org/id/draft-ietf-tcpm-fastopen-01.txt
and a research paper at
http://conferences.sigcomm.org/co-next/2011/papers/1569470463.pdf

A prototype implementation was first developed by Sivasankar
Radhakrishnan (sivasankar@cs.ucsd.edu).

A patch based on an older version of Linux kernel has been
undergoing internal tests at Google for the past few months.

Jerry Chu (3):
  tcp: TCP Fast Open Server - header & support functions
  tcp: TCP Fast Open Server - support TFO listeners
  tcp: TCP Fast Open Server - main code path
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: TCP Fast Open Server - main code path

This patch adds the main processing path to complete the TFO server
patches.

A TFO request (i.e., SYN+data packet with a TFO cookie option) first
gets processed in tcp_v4_conn_request(). If it passes the various TFO
checks by tcp_fastopen_check(), a child socket will be created right
away to be accepted by applications, rather than waiting for the 3WHS
to finish.

In additon to the use of TFO cookie, a simple max_qlen based scheme
is put in place to fend off spoofed TFO attack.

When a valid ACK comes back to tcp_rcv_state_process(), it will cause
the state of the child socket to switch from either TCP_SYN_RECV to
TCP_ESTABLISHED, or TCP_FIN_WAIT1 to TCP_FIN_WAIT2. At this time
retransmission will resume for any unack'ed (data, FIN,...) segments.

Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: TCP Fast Open Server - support TFO listeners

This patch builds on top of the previous patch to add the support
for TFO listeners. This includes -

1. allocating, properly initializing, and managing the per listener
fastopen_queue structure when TFO is enabled

2. changes to the inet_csk_accept code to support TFO. E.g., the
request_sock can no longer be freed upon accept(), not until 3WHS
finishes

3. allowing a TCP_SYN_RECV socket to properly poll() and sendmsg()
if it's a TFO socket

4. properly closing a TFO listener, and a TFO socket before 3WHS
finishes

5. supporting TCP_FASTOPEN socket option

6. modifying tcp_check_req() to use to check a TFO socket as well
as request_sock

7. supporting TCP's TFO cookie option

8. adding a new SYN-ACK retransmit handler to use the timer directly
off the TFO socket rather than the listener socket. Note that TFO
server side will not retransmit anything other than SYN-ACK until
the 3WHS is completed.

The patch also contains an important function
"reqsk_fastopen_remove()" to manage the somewhat complex relation
between a listener, its request_sock, and the corresponding child
socket. See the comment above the function for the detail.

Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: TCP Fast Open Server - header & support functions

This patch adds all the necessary data structure and support
functions to implement TFO server side. It also documents a number
of flags for the sysctl_tcp_fastopen knob, and adds a few Linux
extension MIBs.

In addition, it includes the following:

1. a new TCP_FASTOPEN socket option an application must call to
supply a max backlog allowed in order to enable TFO on its listener.

2. A number of key data structures:
"fastopen_rsk" in tcp_sock - for a big socket to access its
request_sock for retransmission and ack processing purpose. It is
non-NULL iff 3WHS not completed.

"fastopenq" in request_sock_queue - points to a per Fast Open
listener data structure "fastopen_queue" to keep track of qlen (# of
outstanding Fast Open requests) and max_qlen, among other things.

"listener" in tcp_request_sock - to point to the original listener
for book-keeping purpose, i.e., to maintain qlen against max_qlen
as part of defense against IP spoofing attack.

3. various data structure and functions, many in tcp_fastopen.c, to
support server side Fast Open cookie operations, including
/proc/sys/net/ipv4/tcp_fastopen_key to allow manual rekeying.

Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: add D-Link DGE-560T identifiers.

This one includes a 8168. Not to be confused with the sky2 driven
one whose PCI vendor and device ID are the same.

Reported-by: Neyuki Inaya <in@joblog.ru>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: add some slack to arp monitoring time limits

Currently, all the time limits in the bonding ARP monitor are in
multiples of arp_interval -- the time interval at which the ARP
monitor is periodically scheduled.

With a fast network round-trip and a little scheduling latency
of the ARP monitor work, a limit of n*delta_in_ticks may
effectively mean (n-1)*delta_in_ticks.

This is fatal in case of n==1  (the link will stay down
forever) and makes the behaviour non-deterministic in all the
other cases.

Add a delta_in_ticks/2 time slack to all the time limits.

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: remove some deadcode

__ipv6_regen_rndid no longer returns anything other than 0
so there's no point in verifying what it returns

Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix documentation of skb_needs_linearize().

skb_needs_linearize() does not check highmem DMA as it does not call
illegal_highdma() anymore, so there is no need to mention highmem DMA here.

(Indeed, ~NETIF_F_SG flag, which is checked in skb_needs_linearize(), can
be set when illegal_highdma() returns true, and we are assured that
illegal_highdma() is invoked prior to skb_needs_linearize() as
skb_needs_linearize() is a static method called only once.
But ~NETIF_F_SG can be set not only there in this same invocation path.
It can also be set when can_checksum_protocol() returns false).

see commit 02932ce9e2c136e6fab2571c8e0dd69ae8ec9853,
Convert skb_need_linearize() to use precomputed features.
Signed-off-by: Rami Rosen <rosenr@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Minor logic clean-up in ipv4_mtu

In ipv4_mtu there is some logic where we are testing for a non-zero value
and a timer expiration, then setting the value to zero, and then testing if
the value is zero we set it to a value based on the dst.  Instead of
bothering with the extra steps it is easier to just cleanup the logic so
that we set it to the dst based value if it is zero or if the timer has
expired.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>

net:atm:fix up ENOIOCTLCMD error handling

At commit 07d106d0, Linus pointed out that ENOIOCTLCMD should be
translated as ENOTTY to user mode.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:stmmac: convert driver to use devm_request_and_ioremap.

This patch moves calls to ioremap and request_mem_region to
devm_request_and_ioremap call.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:stmmac: Remove bus_id from mdio platform data.

This patch removes bus_id from mdio platform data, The reason to remove
bus_id is, stmmac mdio bus_id is always same as stmmac bus-id, so there
is no point in passing this in different variable.
Also stmmac ethernet driver connects to phy with bus_id passed its
platform data.
So, having single bus-id is much simpler.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:stmmac: fix broken stmmac_pltfr_remove.

This patch fixes stmmac_pltfr_remove function, which is broken because,
it is accessing plat variable via freed memory priv pointer which gets
freed by free_netdev called from stmmac_dvr_remove.

In short this patch caches the plat pointer in local variable before
calling stmmac_dvr_remove to prevent code accessing freed memory.

Without this patch any attempt to remove the stmmac device will fail as
below:

Unregistering eth 0 ...
Unable to handle kernel paging request at virtual address 6b6b6bab
pgd = de5dc000
[6b6b6bab] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP
Modules linked in: cdev(O+)
CPU: 0    Tainted: G           O  (3.3.1_stm24_0210-b2000+ #25)
PC is at stmmac_pltfr_remove+0x2c/0xa0
LR is at stmmac_pltfr_remove+0x28/0xa0
pc : [<c01b8908>]    lr : [<c01b8904>]    psr: 60000013
sp : def6be78  ip : de6c5a00  fp : 00000000
r10: 00000028  r9 : c082d81d  r8 : 00000001
r7 : de65a600  r6 : df81b240  r5 : c0413fd8  r4 : 00000000
r3 : 6b6b6b6b  r2 : def6be6c  r1 : c0355e2b  r0 : 00000020
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c53c7d  Table: 5e5dc04a  DAC: 00000015
Process insmod (pid: 738, stack limit = 0xdef6a2f0)
Stack: (0xdef6be78 to 0xdef6c000)
be60:                                                       c0413fe0
c0403658
be80: c0400bb0 c019270c c01926f8 c0191478 00000000 c0414014 c0413fe0
c01914d8
bea0: 00000000 c0413fe0 df8045d0 c019109c c0413fe0 c0400bf0 c0413fd8
c018f04c
bec0: 00000000 bf000000 c0413fd8 c01929a0 c0413fd8 bf000000 00000000
c0192bfc
bee0: bf00009c bf000014 def6a000 c000859c 00000000 00000001 bf00009c
bf00009c
bf00: 00000001 bf00009c 00000001 bf0000e4 de65a600 00000001 c082d81d
c0058cd0
bf20: bf0000a8 c004fbd8 c0056414 c082d815 c02aea20 bf0001f0 00b0b008
e0846208
bf40: c03ec8a0 e0846000 0000db0d e0850604 e08504de e0853a24 00000204
000002d4
bf60: 00000000 00000000 0000001c 0000001d 00000009 00000000 00000006
00000000
bf80: 00000003 f63d4e2e 0000db0d bef02ed8 00000080 c000d2e8 def6a000
00000000
bfa0: 00000000 c000d140 f63d4e2e 0000db0d 00b0b018 0000db0d 00b0b008
b6f4f298
bfc0: f63d4e2e 0000db0d bef02ed8 00000080 00000003 00000000 00010000
00000000
bfe0: 00b0b008 bef02c64 00008d20 b6ef3784 60000010 00b0b018 5a5a5a5a
5a5a5a5a
[<c01b8908>] (stmmac_pltfr_remove+0x2c/0xa0) from [<c019270c>]
(platform_drv_remove+0x14/0x18)
[<c019270c>] (platform_drv_remove+0x14/0x18) from [<c0191478>]
(__device_release_driver+0x64/0xa4)
[<c0191478>] (__device_release_driver+0x64/0xa4) from [<c01914d8>]
(device_release_driver+0x20/0x2c)
[<c01914d8>] (device_release_driver+0x20/0x2c) from [<c019109c>]
(bus_remove_device+0xcc/0xdc)
[<c019109c>] (bus_remove_device+0xcc/0xdc) from [<c018f04c>]
(device_del+0x104/0x160)
[<c018f04c>] (device_del+0x104/0x160) from [<c01929a0>]
(platform_device_del+0x18/0x58)
[<c01929a0>] (platform_device_del+0x18/0x58) from [<c0192bfc>]
(platform_device_unregister+0xc/0x18)
[<c0192bfc>] (platform_device_unregister+0xc/0x18) from [<bf000014>]
(r_init+0x14/0x2c [cdev])
[<bf000014>] (r_init+0x14/0x2c [cdev]) from [<c000859c>]
(do_one_initcall+0x90/0x160)
[<c000859c>] (do_one_initcall+0x90/0x160) from [<c0058cd0>]
(sys_init_module+0x15c4/0x1794)
[<c0058cd0>] (sys_init_module+0x15c4/0x1794) from [<c000d140>]
(ret_fast_syscall+0x0/0x30)
Code: e1a04000 e59f0070 eb039b65 e59636e4 (e5933040)

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:stmmac: Add check if mdiobus is registered in stmmac_mdio_unregister

This patch adds a basic check in stmmac_mdio_unregister to see if mdio
bus registeration for this driver was actually sucessfull or not.

Use case here is, if BSP considers using mdio-gpio bus along with stmmac
driver by passing mdio_bus_data as NULL in platform data.
Call to stmmac_mdio_register with mdio_bus_data as NULL returns 0, which
is a considered sucessfull call form stmmac. Then again when we unload
the driver we just call stmmac_mdio_unregister, this is were the actual
problem is stmmac-mdio code dont really know at this instance of calling
that stmmac_mdio_register was actually successful.

So Adding a check in stmmac_mdio_unregister is always safe.

Without this patch stmmac driver calls stmmac_mdio_register from
stmmac_release which Segfaults as mii bus was never registered at the
first point.

Originally the this bug was found when unloading an stmmac driver
instance which uses mdio-gpio for smi access.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

openvswitch: using kfree_rcu() to simplify the code

The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: fix shutdown parameter checking

Return -EINVAL rather than 0 given an invalid "mode" parameter.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>